[OpenWrt-Devel] [PATCH] ARV752DPW22: enable netconsole in u-boot if 192.168.1.2 is reachable

[Tobias Göbel]

Hi Luka,

i'll send Daniel a pullrequest as soon as i have time to put it onto my
git server (was only a local git repository i did the patching). Thanks
for pointing this out.

The old filesize is (in my compilations) 185572 Byte, the New one is
188984. So the size differs in roughly 3,5KByte. It's even before the
normal boot partition wich is at 0x80020000 (wich should be ~200KByte).

Tobias

Am 14.03.2015 um 08:29 schrieb Luka Perkov:
> Hi Tobias,
>
> On Sat, Mar 07, 2015 at 05:59:36PM +0100, Tobias Göbel wrote:
>> just added netconsole support to ARV752DPW22 (should work on the other
>> lantiq devices too).
>> The device boot's and tries to ping the ip set in $serverip if this
>> works, all input / output and errors are displayed on the netconsole.
>> If it didn't work serial will be used to display everything.
>>
>> It's mainly addopted from some dockstar guides, but works without any
>> problems. u-boot is slightly bigger, but works without problems (188984
>> Bytes here).
>>
>> Hopefully it'll be addopted to the trunk, as this let's you maintain
>> (and update) your openwrt without opening the box and adding a serial
>> console.
>
> Please send pull request for this patch to uboot git repo that Daniel
> has on github [1].
>
> How much this change increases the size of the binary?
>
> Luka
>
> [1] https://github.com/danielschwierzeck/u-boot-lantiq
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel