[OpenWrt-Devel] [PATCH 3/6] [CC] [backport] ar71xx: add GL-Domino Pi support
alzhao
alzhao at gmail.com
Wed May 4 23:02:07 EDT 2016
Backport of changeset 47622
Add GL-Domino Pi dev board support
Signed-off-by: alzhao <alzhao at gmail.com>
---
.../ar71xx/base-files/etc/uci-defaults/01_leds | 4 +
.../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-3.18 | 1 +
.../ar71xx/files/arch/mips/ath79/mach-gl-domino.c | 136 +++++++++++++++++++++
target/linux/ar71xx/generic/profiles/gli.mk | 11 ++
target/linux/ar71xx/image/Makefile | 8 ++
.../913-MIPS-ath79-add-domino-support.patch | 39 ++++++
9 files changed, 204 insertions(+)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c
create mode 100644 target/linux/ar71xx/patches-3.18/913-MIPS-ath79-add-domino-support.patch
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 7c00947..8f7a6f9 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -189,6 +189,10 @@ gl-ar300)
ucidef_set_led_wlan "wlan" "WLAN" "gl_ar300:wlan" "phy0tpt"
;;
+gl-domino)
+ ucidef_set_led_wlan "wlan" "WLAN" "domino:blue:wlan" "phy0tpt"
+ ;;
+
gl-inet)
ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 3cd97ec..781172c 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -380,6 +380,7 @@ alfa-ap96 |\
alfa-nx |\
ap83 |\
gl-ar150 |\
+gl-domino |\
gl-inet |\
jwap003 |\
pb42 |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index bc5dc17..5349009 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -442,6 +442,9 @@ ar71xx_board_detect() {
*"Dragino v2")
name="dragino2"
;;
+ *"Domino Pi")
+ name="gl-domino"
+ ;;
*"GL-AR300")
name="gl-ar300"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 0800642..699c27e 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -213,6 +213,7 @@ platform_check_image() {
dragino2 | \
gl-ar150 | \
gl-ar300 | \
+ gl-domino | \
epg5000 | \
esr1750 | \
esr900 | \
diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18
index 4365232..3f713df 100644
--- a/target/linux/ar71xx/config-3.18
+++ b/target/linux/ar71xx/config-3.18
@@ -71,6 +71,7 @@ CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_F9K1115V2=y
CONFIG_ATH79_MACH_GL_AR150=y
CONFIG_ATH79_MACH_GL_AR300=y
+CONFIG_ATH79_MACH_GL_DOMINO=y
CONFIG_ATH79_MACH_GL_INET=y
CONFIG_ATH79_MACH_GS_MINIBOX_V1=y
CONFIG_ATH79_MACH_GS_OOLITE=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c
new file mode 100644
index 0000000..a8a42ad
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c
@@ -0,0 +1,136 @@
+/*
+ * Domino board support
+ *
+ * Copyright (C) 2011 dongyuqi <729650915 at qq.com>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg at openwrt.org>
+ * Copyright (C) 2013 alzhao <alzhao at gmail.com>
+ * Copyright (C) 2014 Michel Stempin <michel.stempin at wanadoo.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DOMINO_GPIO_LED_WLAN 0
+#define DOMINO_GPIO_LED_WAN 17
+#define DOMINO_GPIO_LED_USB 1
+#define DOMINO_GPIO_LED_LAN1 13
+#define DOMINO_GPIO_LED_LAN2 14
+#define DOMINO_GPIO_LED_LAN3 15
+#define DOMINO_GPIO_LED_LAN4 16
+#define DOMINO_GPIO_LED_SYS 27
+#define DOMINO_GPIO_LED_WPS 26
+#define DOMINO_GPIO_USB_POWER 6
+
+#define DOMINO_GPIO_BTN_RESET 11
+#define DOMINO_GPIO_BTN_WPS 20
+
+#define DOMINO_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DOMINO_KEYS_DEBOUNCE_INTERVAL (3 * DOMINO_KEYS_POLL_INTERVAL)
+
+#define DOMINO_MAC0_OFFSET 0x0000
+#define DOMINO_MAC1_OFFSET 0x0000
+#define DOMINO_CALDATA_OFFSET 0x1000
+#define DOMINO_WMAC_MAC_OFFSET 0x0000
+
+static struct gpio_led domino_leds_gpio[] __initdata = {
+ {
+ .name = "domino:blue:wlan",
+ .gpio = DOMINO_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+ {
+ .name = "domino:red:wan",
+ .gpio = DOMINO_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+ {
+ .name = "domino:white:usb",
+ .gpio = DOMINO_GPIO_LED_USB,
+ .active_low = 0,
+ },
+ {
+ .name = "domino:green:lan1",
+ .gpio = DOMINO_GPIO_LED_LAN1,
+ .active_low = 0,
+ },
+ {
+ .name = "domino:yellow:wps",
+ .gpio = DOMINO_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "domino:orange:sys",
+ .gpio = DOMINO_GPIO_LED_SYS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button domino_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DOMINO_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DOMINO_GPIO_BTN_RESET,
+ .active_low = 0,
+ },
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DOMINO_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DOMINO_GPIO_BTN_WPS,
+ .active_low = 0,
+ }
+};
+
+static void __init domino_setup(void)
+{
+
+ /* ART base address */
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ /* register flash. */
+ ath79_register_m25p80(NULL);
+
+ /* register gpio LEDs and keys */
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(domino_leds_gpio),
+ domino_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, DOMINO_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(domino_gpio_keys),
+ domino_gpio_keys);
+
+ gpio_request_one(DOMINO_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+ /* enable usb */
+ ath79_register_usb();
+
+ /* register eth0 as WAN, eth1 as LAN */
+ ath79_init_mac(ath79_eth0_data.mac_addr, art+DOMINO_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, art+DOMINO_MAC1_OFFSET, 0);
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ /* register wireless mac with cal data */
+ ath79_register_wmac(art + DOMINO_CALDATA_OFFSET, art + DOMINO_WMAC_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_GL_DOMINO, "DOMINO", "Domino Pi", domino_setup);
diff --git a/target/linux/ar71xx/generic/profiles/gli.mk b/target/linux/ar71xx/generic/profiles/gli.mk
index e399739..3ad1f9d 100644
--- a/target/linux/ar71xx/generic/profiles/gli.mk
+++ b/target/linux/ar71xx/generic/profiles/gli.mk
@@ -36,3 +36,14 @@ define Profile/GL-AR300/Description
endef
$(eval $(call Profile,GL-AR300))
+
+define Profile/DOMINO
+ NAME:=GL Domino Pi
+ PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+define Profile/DOMINO/Description
+ Configuration of Domino, Wifi for everything.
+endef
+
+$(eval $(call Profile,DOMINO))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 59bc919..19f4bc0 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -160,6 +160,14 @@ define Device/gl-ar300
endef
TARGET_DEVICES += gl-ar300
+define Device/gl-domino
+ BOARDNAME = DOMINO
+ IMAGE_SIZE = 16000k
+ CONSOLE = ttyATH0,115200
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += gl-domino
+
define Device/wndr3700
BOARDNAME = WNDR3700
NETGEAR_KERNEL_MAGIC = 0x33373030
diff --git a/target/linux/ar71xx/patches-3.18/913-MIPS-ath79-add-domino-support.patch b/target/linux/ar71xx/patches-3.18/913-MIPS-ath79-add-domino-support.patch
new file mode 100644
index 0000000..69c3a0f
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/913-MIPS-ath79-add-domino-support.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -553,6 +553,16 @@ config ATH79_MACH_GL_AR300
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_GL_DOMINO
++ bool "DOMINO support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_EAP300V2
+ bool "EnGenius EAP300 v2 support"
+ select SOC_AR934X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -80,6 +80,7 @@ obj-$(CONFIG_ATH79_MACH_ESR1750) += mach
+ obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
+ obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o
+ obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o
++obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o
+ obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
+ obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o
+ obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -69,6 +69,7 @@ enum ath79_mach_type {
+ ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
+ ATH79_MACH_GL_AR150, /* GL-AR150 support */
+ ATH79_MACH_GL_AR300, /* GL-AR300 */
++ ATH79_MACH_GL_DOMINO, /* Domino */
+ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
+ ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */
+ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
--
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list