[OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R

[Roger Pueyo Centelles]

Hi,

@Hartmut
Ok, now I see. Thanks!

@郭传鈜

Acoording to mach-archer-c7.c ,I think we should use ath79_register_pci();
> here and use /lib/preinit/81_load_ath10k_board_bin to load calibration
> data for ath10k.
>

So, I understand I have to remove this line from
target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mac1200r.c

ap91_pci_init(art + MAC1200R_PCIE_CALDATA_OFFSET, tmpmac);

Then, the MACs in my router end in:
- eth0=>47
- eth1=>49
- wlan1=>4A

so it makes sense to have wlan0 ending in 48 (i.e. eth1 minus 1). In
target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin (art
partition is mtd4):

                        dd if=/dev/mtdblock4 \
                                bs=1 skip=20492 count=2104 >>
/tmp/ath10k-board.bin
                ;;
                mc-mac1200r)
                        local mac
                        mac=$(macaddr_add $(cat
/sys/class/net/eth1/address) -1)

                        dd if=/dev/mtdblock4 \
                                bs=1 skip=20480 count=6 \
                                of=/tmp/ath10k-board.bin
                        macaddr_2bin $mac >> /tmp/ath10k-board.bin
                        dd if=/dev/mtdblock4 \
                                bs=1 skip=20492 count=2104 >>
/tmp/ath10k-board.bin
                ;;
                r6100)
                        local mac
                        mac=$(macaddr_add $(cat
/sys/class/net/eth1/address) +2)

                        dd if=/dev/mtdblock2 \

>> +$(eval $(call
>> SingleProfile,TPLINK-LZMA,64kraw,MAC1200R,mc-mac1200r,MC-MAC1200R,ttyS0,115200,0x12000001,1,8Mlzma))
>> >The factory image is broken since TP-LINK started to use a new firmware
>> format with RSA signature in China.This should be introduced in the TOH
>> wiki I think:)
>>
>
Besides adding this to the wiki, what should I change so that the factory
firmware is not generated?

Thanks!

Roger
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150127/1b4ff0e3/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel