[OpenWrt-Devel] [PATCH 1/3 v3] [Lantiq] [P2812HNUFX] Add device tree for P2812HNUF1 and P2812HNUF3
Sylwester Petela (ScApi)
sscapi at gmail.com
Sun Jan 11 11:49:05 EST 2015
Add device tree for P2812HNUF1 and P2812HNUF3.
Signed-off-by: Sylwester Petela <sscapi at gmail.com>
---
target/linux/lantiq/dts/P2812HNUF1.dts | 106 +++++++
target/linux/lantiq/dts/P2812HNUF3.dts | 109 ++++++++
target/linux/lantiq/dts/P2812HNUFX.dtsi | 257 +++++++++++++++++
3 files changed, 472 insertions(+)
diff --git a/target/linux/lantiq/dts/P2812HNUF1.dts b/target/linux/lantiq/dts/P2812HNUF1.dts
index e69de29..24ded3e 100644
--- a/target/linux/lantiq/dts/P2812HNUF1.dts
+++ b/target/linux/lantiq/dts/P2812HNUF1.dts
@@ -0,0 +1,106 @@
+/dts-v1/;
+
+/include/ "P2812HNUFX.dtsi"
+
+/ {
+ model = "P2812HNUF1 - ZyXEL P-2812HNU-F1";
+
+ fpi at 10000000 {
+ localbus at 0 {
+ nand-parts at 0 {
+ compatible = "gen_nand", "lantiq,nand-xway";
+ lantiq,cs = <1>;
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ };
+ partition at 40000 {
+ label = "uboot-env";
+ reg = <0x40000 0x20000>;
+ };
+ partition at 60000 {
+ label = "kernel";
+ reg = <0x60000 0x200000>;
+ };
+ partition at 260000 {
+ label = "ubi";
+ reg = <0x260000 0x7da0000>;
+ };
+ };
+ };
+ pcie at d900000 {
+ status = "disabled";
+ };
+ };
+
+ ralink_eep {
+ compatible = "ralink,eeprom";
+ ralink,eeprom = "RT3062.eeprom";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ internet_red { /* red */
+ label = "internet_red";
+ gpios = <&stp 16 1>;
+ };
+ internet_green {
+ label = "internet_green"; /* green */
+ gpios = <&stp 17 1>;
+ };
+ dsl {
+ label = "dsl";
+ gpios = <&stp 18 1>;
+ };
+ dsl2 {
+ label = "dsl2";
+ gpios = <&stp 19 1>;
+ };
+ wireless_red { /* red */
+ label = "wireless_red";
+ gpios = <&stp 20 1>;
+ };
+ wireless_green { /* green */
+ label = "wireless_green";
+ gpios = <&stp 21 1>;
+ };
+ power { /* red */
+ label = "power";
+ gpios = <&stp 22 1>;
+ };
+ power2 { /* green */
+ label = "power2";
+ gpios = <&stp 23 1>;
+ };
+ usb1 { /* green */
+ label = "usb1";
+ gpios = <&gpio 38 1>;
+ };
+ usb2 { /* green */
+ label = "usb2";
+ gpios = <&gpio 44 1>;
+ };
+ phone1 { /* green */
+ label = "phone1";
+ gpios = <&gpio 11 1>;
+ };
+ phone1warn { /* red */
+ label = "phone1warn";
+ gpios = <&gpio 12 1>;
+ };
+ phone2warn { /* red */
+ label = "phone2warn";
+ gpios = <&gpio 26 1>;
+ };
+ phone2 { /* green */
+ label = "phone2";
+ gpios = <&gpio 28 1>;
+ };
+ };
+};
diff --git a/target/linux/lantiq/dts/P2812HNUF3.dts b/target/linux/lantiq/dts/P2812HNUF3.dts
index e69de29..5d25c3c 100644
--- a/target/linux/lantiq/dts/P2812HNUF3.dts
+++ b/target/linux/lantiq/dts/P2812HNUF3.dts
@@ -0,0 +1,109 @@
+/dts-v1/;
+
+/include/ "P2812HNUFX.dtsi"
+
+/ {
+ model = "P2812HNUF3 - ZyXEL P-2812HNU-F3";
+
+ fpi at 10000000 {
+ localbus at 0 {
+ nor-boot at 0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "uboot";
+ reg = <0x0 0x50000>;
+ read-only;
+ };
+ partition at 50000 {
+ label = "uboot-env";
+ reg = <0x50000 0x10000>;
+ };
+ partition at 60000 {
+ label = "unused";
+ reg = <0x60000 0x7a0000>;
+ };
+ };
+
+ nand-parts at 0 {
+ compatible = "gen_nand", "lantiq,nand-xway";
+ lantiq,cs = <1>;
+ bank-width = <2>;
+ reg = <1 0x0 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "kernel";
+ reg = <0x0 0x200000>;
+ };
+ partition at 200000 {
+ label = "ubi";
+ reg = <0x200000 0x7e00000>;
+ };
+ };
+ };
+ };
+
+ ralink_eep {
+ compatible = "ralink,eeprom";
+ ralink,eeprom = "RT3092.eeprom";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ internet2 {
+ label = "internet2";
+ gpios = <&stp 16 1>;
+ };
+ internet {
+ label = "internet";
+ gpios = <&stp 17 1>;
+ };
+ dsl {
+ label = "dsl";
+ gpios = <&stp 18 1>;
+ };
+ dsl2 {
+ label = "dsl2";
+ gpios = <&stp 19 1>;
+ };
+ wireless_red {
+ label = "wireless_red";
+ gpios = <&stp 20 1>;
+ };
+ wireless_green {
+ label = "wireless_green";
+ gpios = <&stp 21 1>;
+ };
+ power2 {
+ label = "power2";
+ gpios = <&stp 22 1>;
+ };
+ power {
+ label = "power";
+ gpios = <&stp 23 1>;
+ };
+ phone1 {
+ label = "phone1";
+ gpios = <&gpio 11 1>;
+ };
+ phone1warn {
+ label = "phone1warn";
+ gpios = <&gpio 12 1>;
+ };
+ phone2 {
+ label = "phone2";
+ gpios = <&gpio 28 1>;
+ };
+ phone2warn {
+ label = "phone2warn";
+ gpios = <&gpio 26 1>;
+ };
+ };
+};
diff --git a/target/linux/lantiq/dts/P2812HNUFX.dtsi b/target/linux/lantiq/dts/P2812HNUFX.dtsi
index e69de29..e571eb6 100644
--- a/target/linux/lantiq/dts/P2812HNUFX.dtsi
+++ b/target/linux/lantiq/dts/P2812HNUFX.dtsi
@@ -0,0 +1,257 @@
+/include/ "vr9.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ memory at 0 {
+ reg = <0x0 0x8000000>;
+ };
+
+ fpi at 10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xEEFFFFF>;
+ reg = <0x10000000 0xEF00000>;
+
+ localbus at 0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+ 1 0 0x4000000 0x4000010>; /* addsel1 */
+ compatible = "lantiq,localbus", "simple-bus";
+ };
+
+ gpio: pinmux at E100B10 {
+ compatible = "lantiq,pinctrl-xr9";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ interrupt-parent = <&icu0>;
+ interrupts = <166 135 66 40 41 42 38>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xE100B10 0xA0>;
+
+ state_default: pinmux {
+ exin3 {
+ lantiq,groups = "exin3";
+ lantiq,function = "exin";
+ };
+ mdio {
+ lantiq,groups = "mdio";
+ lantiq,function = "mdio";
+ };
+ gphy-leds {
+ lantiq,groups = "gphy0 led1", "gphy1 led1",
+ "gphy0 led2", "gphy1 led2";
+ lantiq,function = "gphy";
+ lantiq,pull = <2>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ lantiq,pull = <2>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ pci-in {
+ lantiq,groups = "req1";
+ lantiq,function = "pci";
+ lantiq,output = <0>;
+ lantiq,open-drain = <1>;
+ lantiq,pull = <2>;
+ };
+ pci-out {
+ lantiq,groups = "gnt1";
+ lantiq,function = "pci";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <2>;
+ };
+ pcie-rst {
+ lantiq,pins = "io38";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ ifxhcd-rst {
+ lantiq,pins = "io33";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ nand_out {
+ lantiq,groups = "nand cle", "nand ale";
+ lantiq,function = "ebu";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+ nand_cs1 {
+ lantiq,groups = "nand cs1";
+ lantiq,function = "ebu";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+ };
+ };
+
+ eth at E108000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-net";
+ reg = < 0xE108000 0x3000 /* switch */
+ 0xE10B100 0x70 /* mdio */
+ 0xE10B1D8 0x30 /* mii */
+ 0xE10B308 0x30 >; /* pmac */
+ interrupt-parent = <&icu0>;
+ interrupts = <73 72>;
+
+ lan: interface at 0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mac-address = [ 00 11 22 33 44 55 ];
+ lantiq,switch;
+
+ ethernet at 0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ ethernet at 1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ ethernet at 2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet at 4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ ethernet at 5 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+ };
+
+ mdio at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy0: ethernet-phy at 0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy1: ethernet-phy at 1 {
+ reg = <0x1>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy5: ethernet-phy at 5 {
+ reg = <0x5>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy at 11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy at 13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ stp: stp at E100BB0 {
+ compatible = "lantiq,gpio-stp-xway";
+ reg = <0xE100BB0 0x40>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ lantiq,shadow = <0xffffff>;
+ lantiq,groups = <0x7>;
+ lantiq,dsl = <0x0>;
+ lantiq,phy1 = <0x0>;
+ lantiq,phy2 = <0x0>;
+ };
+
+ ifxhcd at E101000 {
+ status = "okay";
+ gpios = <&gpio 33 0>;
+ lantiq,portmask = <0x3>;
+ };
+
+ pci at E105400 {
+ status = "okay";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ compatible = "lantiq,pci-xway";
+ bus-range = <0x0 0x0>;
+ ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
+ 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+ reg = <0x7000000 0x8000 /* config space */
+ 0xE105400 0x400>; /* pci bridge */
+ lantiq,bus-clock = <33333333>;
+ /*lantiq,external-clock;*/
+ lantiq,delay-hi = <0>; /* 0ns delay */
+ lantiq,delay-lo = <0>; /* 0.0ns delay */
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
+ >;
+ gpio-reset = <&gpio 21 0>;
+ req-mask = <0x1>; /* GNT1 */
+ };
+ };
+
+ gphy-xrx200 {
+ compatible = "lantiq,phy-xrx200";
+ firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
+ firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
+ phys = [ 00 01 ];
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 39 1>;
+ linux,code = <0x198>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 1 1>;
+ linux,code = <0xf7>;
+ };
+ };
+};
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list