[RFT 1/5] realtek: split DGS-1210-10P DTS
Adrian Schmutzler
mail at adrianschmutzler.de
Sat Oct 9 10:45:30 PDT 2021
Hi,
> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org]
> On Behalf Of Paul Fertser
> Sent: Dienstag, 5. Oktober 2021 21:40
> To: openwrt-devel at lists.openwrt.org
> Cc: Paul Fertser <fercerpav at gmail.com>
> Subject: [RFT 1/5] realtek: split DGS-1210-10P DTS
>
> In preparations to add support for more similar boards the common part is
> split into a DTSI.
>
> The model that's currently supported is known to be revision F1 so mark it
> accordingly and provide appropriate compatible string for sysupgrade to
> work.
I'd say the device rename is way more important than the DTS split. It should be covered in the commit title.
Personally, I'd split these two changes (one for rename, one for shared DTSI and device recipe).
Best
Adrian
>
> Signed-off-by: Paul Fertser <fercerpav at gmail.com>
> ---
> ...0p.dts => rtl8380_d-link_dgs-1210-10.dtsi} | 60 -----------------
> .../rtl8380_d-link_dgs-1210-10p-f1.dts | 66 +++++++++++++++++++
> target/linux/realtek/image/Makefile | 7 +-
> 3 files changed, 71 insertions(+), 62 deletions(-) rename
> target/linux/realtek/dts-5.10/{rtl8382_d-link_dgs-1210-10p.dts => rtl8380_d-
> link_dgs-1210-10.dtsi} (60%) create mode 100644 target/linux/realtek/dts-
> 5.10/rtl8380_d-link_dgs-1210-10p-f1.dts
>
> diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts
> b/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10.dtsi
> similarity index 60%
> rename from target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts
> rename to target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10.dtsi
> index 119eaadc16e6..c465e7354872 100644
> --- a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts
> +++ b/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10.dtsi
> @@ -6,9 +6,6 @@
> #include <dt-bindings/gpio/gpio.h>
>
> / {
> - compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc";
> - model = "D-Link DGS-1210-10P";
> -
> aliases {
> led-boot = &led_power;
> led-failsafe = &led_power;
> @@ -20,11 +17,6 @@
> bootargs = "console=ttyS0,115200";
> };
>
> - memory at 0 {
> - device_type = "memory";
> - reg = <0x0 0x8000000>;
> - };
> -
> leds {
> pinctrl-names = "default";
> pinctrl-0 = <&pinmux_disable_sys_led>; @@ -50,58 +42,6
> @@
> };
> };
>
> -
> -&spi0 {
> - status = "okay";
> - flash at 0 {
> - compatible = "jedec,spi-nor";
> - reg = <0>;
> - spi-max-frequency = <10000000>;
> -
> - partitions {
> - compatible = "fixed-partitions";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - partition at 0 {
> - label = "u-boot";
> - reg = <0x00000000 0x80000>;
> - read-only;
> - };
> - partition at 80000 {
> - label = "u-boot-env";
> - reg = <0x00080000 0x40000>;
> - read-only;
> - };
> - partition at c0000 {
> - label = "u-boot-env2";
> - reg = <0x000c0000 0x40000>;
> - };
> - partition at 280000 {
> - label = "firmware";
> - compatible = "denx,uimage";
> - reg = <0x00100000 0xd80000>;
> - };
> - partition at be80000 {
> - label = "kernel2";
> - reg = <0x00e80000 0x180000>;
> - };
> - partition at 1000000 {
> - label = "sysinfo";
> - reg = <0x01000000 0x40000>;
> - };
> - partition at 1040000 {
> - label = "rootfs2";
> - reg = <0x01040000 0xc00000>;
> - };
> - partition at 1c40000 {
> - label = "jffs2";
> - reg = <0x01c40000 0x3c0000>;
> - };
> - };
> - };
> -};
> -
> &uart1 {
> status = "okay";
> };
> diff --git a/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10p-f1.dts
> b/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10p-f1.dts
> new file mode 100644
> index 000000000000..9a301adb935c
> --- /dev/null
> +++ b/target/linux/realtek/dts-5.10/rtl8380_d-link_dgs-1210-10p-f1.dts
> @@ -0,0 +1,66 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +
> +#include "rtl8380_d-link_dgs-1210-10.dtsi"
> +
> +/ {
> + compatible = "d-link,dgs-1210-10p-f1", "realtek,rtl838x-soc";
> + model = "D-Link DGS-1210-10P F1";
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x8000000>;
> + };
> +};
> +
> +
> +&spi0 {
> + status = "okay";
> +
> + flash at 0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <10000000>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x00000000 0x80000>;
> + read-only;
> + };
> + partition at 80000 {
> + label = "u-boot-env";
> + reg = <0x00080000 0x40000>;
> + read-only;
> + };
> + partition at c0000 {
> + label = "u-boot-env2";
> + reg = <0x000c0000 0x40000>;
> + };
> + partition at 280000 {
> + label = "firmware";
> + compatible = "denx,uimage";
> + reg = <0x00100000 0xd80000>;
> + };
> + partition at be80000 {
> + label = "kernel2";
> + reg = <0x00e80000 0x180000>;
> + };
> + partition at 1000000 {
> + label = "sysinfo";
> + reg = <0x01000000 0x40000>;
> + };
> + partition at 1040000 {
> + label = "rootfs2";
> + reg = <0x01040000 0xc00000>;
> + };
> + partition at 1c40000 {
> + label = "jffs2";
> + reg = <0x01c40000 0x3c0000>;
> + };
> + };
> + };
> +};
> diff --git a/target/linux/realtek/image/Makefile
> b/target/linux/realtek/image/Makefile
> index 5e4b4cde800d..c1e47f719f3a 100644
> --- a/target/linux/realtek/image/Makefile
> +++ b/target/linux/realtek/image/Makefile
> @@ -53,12 +53,15 @@ define Device/d-link_dgs-1210
> DEVICE_VENDOR := D-Link
> endef
>
> -define Device/d-link_dgs-1210-10p
> +define Device/d-link_dgs-1210-10p-f1
> $(Device/d-link_dgs-1210)
> + SOC := rtl8380
> DEVICE_MODEL := DGS-1210-10P
> + DEVICE_VARIANT := F1
> + SUPPORTED_DEVICES += d-link,dgs-1210-10p
> DEVICE_PACKAGES += lua-rs232
> endef
> -TARGET_DEVICES += d-link_dgs-1210-10p
> +TARGET_DEVICES += d-link_dgs-1210-10p-f1
>
> define Device/d-link_dgs-1210-16
> $(Device/d-link_dgs-1210)
> --
> 2.17.1
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: openpgp-digital-signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.openwrt.org/pipermail/openwrt-devel/attachments/20211009/8a470835/attachment.sig>
More information about the openwrt-devel
mailing list