[OpenWrt-Devel] [PATCH] ramips: split base-files into subtargets
Adrian Schmutzler
freifunk at adrianschmutzler.de
Sun Oct 27 19:41:15 EDT 2019
While most of the target's contents are split into subtargets, the
base-files are maintained for the target as a whole.
However, OpenWrt already implements a mechanism that will use (and
even prefer) files in the subtargets' directories. This can be
exploited to make several scripts subtarget-specific and thus save
some space.
In certain cases, keeping files in parent (=target) base-files was
more convenient, and thus no splitting was performed for those.
Note that this will increase overall code lines, but reduce code
per subtarget.
base-files ipk size reduction:
master (mt7621) 60958 B
split (mt7620) 46358 B (- 14.3 kiB)
split (mt7621) 48759 B (- 11.9 kiB)
split (mt76x8) 44948 B (- 15.6 kiB)
split (rt288x) 43508 B (- 17.0 kiB)
split (rt305x) 45616 B (- 15.0 kiB)
split (mt3883) 44176 B (- 16.4 kiB)
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
This does the same as recently merged for the ath79 target, but
with much bigger effect on package sizes.
I build-tested this for all subtargets (before latest rebase),
but currently do not have hardware for on-device testing.
---
.../ramips/base-files/etc/board.d/01_leds | 481 -----------
.../ramips/base-files/etc/board.d/02_network | 752 ------------------
.../mt7620/base-files/etc/board.d/01_leds | 222 ++++++
.../mt7620/base-files/etc/board.d/02_network | 297 +++++++
.../base-files/etc/board.d/03_gpio_switches | 30 +
.../etc/hotplug.d/firmware/10-rt2x00-eeprom | 0
.../mt7620/base-files/lib/upgrade/platform.sh | 20 +
.../mt7621/base-files/etc/board.d/01_leds | 83 ++
.../mt7621/base-files/etc/board.d/02_network | 238 ++++++
.../base-files/etc/board.d/03_gpio_switches | 16 -
.../base-files/lib/upgrade/platform.sh | 4 -
.../base-files/lib/upgrade/ubnt.sh | 0
.../base-files/sbin/fixup-mac-address | 0
.../mt76x8/base-files/etc/board.d/01_leds | 138 ++++
.../mt76x8/base-files/etc/board.d/02_network | 191 +++++
.../mt76x8/base-files/lib/upgrade/platform.sh | 24 +
.../rt288x/base-files/etc/board.d/01_leds | 34 +
.../rt288x/base-files/etc/board.d/02_network | 61 ++
.../rt288x/base-files/lib/upgrade/platform.sh | 20 +
.../rt305x/base-files/etc/board.d/01_leds | 109 +++
.../rt305x/base-files/etc/board.d/02_network | 228 ++++++
.../lib/preinit/04_handle_checksumming | 13 -
.../rt305x/base-files/lib/upgrade/platform.sh | 20 +
.../rt3883/base-files/etc/board.d/01_leds | 35 +
.../rt3883/base-files/etc/board.d/02_network | 100 +++
.../lib/preinit/04_handle_checksumming | 32 +
.../rt3883/base-files/lib/upgrade/platform.sh | 20 +
27 files changed, 1902 insertions(+), 1266 deletions(-)
delete mode 100755 target/linux/ramips/base-files/etc/board.d/01_leds
delete mode 100755 target/linux/ramips/base-files/etc/board.d/02_network
create mode 100755 target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
create mode 100755 target/linux/ramips/mt7620/base-files/etc/board.d/02_network
create mode 100755 target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches
rename target/linux/ramips/{ => mt7620}/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom (100%)
create mode 100755 target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh
create mode 100755 target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
create mode 100755 target/linux/ramips/mt7621/base-files/etc/board.d/02_network
rename target/linux/ramips/{ => mt7621}/base-files/etc/board.d/03_gpio_switches (55%)
rename target/linux/ramips/{ => mt7621}/base-files/lib/upgrade/platform.sh (91%)
rename target/linux/ramips/{ => mt7621}/base-files/lib/upgrade/ubnt.sh (100%)
rename target/linux/ramips/{ => mt7621}/base-files/sbin/fixup-mac-address (100%)
create mode 100755 target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
create mode 100755 target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
create mode 100755 target/linux/ramips/mt76x8/base-files/lib/upgrade/platform.sh
create mode 100755 target/linux/ramips/rt288x/base-files/etc/board.d/01_leds
create mode 100755 target/linux/ramips/rt288x/base-files/etc/board.d/02_network
create mode 100755 target/linux/ramips/rt288x/base-files/lib/upgrade/platform.sh
create mode 100755 target/linux/ramips/rt305x/base-files/etc/board.d/01_leds
create mode 100755 target/linux/ramips/rt305x/base-files/etc/board.d/02_network
rename target/linux/ramips/{ => rt305x}/base-files/lib/preinit/04_handle_checksumming (65%)
create mode 100755 target/linux/ramips/rt305x/base-files/lib/upgrade/platform.sh
create mode 100755 target/linux/ramips/rt3883/base-files/etc/board.d/01_leds
create mode 100755 target/linux/ramips/rt3883/base-files/etc/board.d/02_network
create mode 100644 target/linux/ramips/rt3883/base-files/lib/preinit/04_handle_checksumming
create mode 100755 target/linux/ramips/rt3883/base-files/lib/upgrade/platform.sh
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
deleted file mode 100755
index 662bf6b6cd..0000000000
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ /dev/null
@@ -1,481 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/leds.sh
-. /lib/functions/uci-defaults.sh
-
-set_wifi_led() {
- ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
-}
-
-
-board=$(board_name)
-boardname="${board##*,}"
-
-board_config_update
-
-led_wlan="$(get_dt_led wlan)"
-[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
-
-case $board in
-7links,px-4885-4m|\
-7links,px-4885-8m)
- set_wifi_led "px-4885:orange:wifi"
- ;;
-aigale,ai-br100)
- ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2"
- set_wifi_led "$boardname:blue:wlan"
- ;;
-airlink101,ar670w|\
-airlink101,ar725w|\
-asiarf,awapn2403)
- set_wifi_led "rt2800soc-phy0::radio"
- ;;
-airlive,air3gii|\
-aximcom,mr-102n|\
-edimax,3g-6200nl|\
-hilink,hlk-7628n|\
-netgear,wnce2001|\
-skylab,skw92a|\
-zbtlink,zbt-we2026)
- set_wifi_led "$boardname:green:wlan"
- ;;
-alfa-network,ac1200rm)
- set_wifi_led "$boardname:green:wlan2g" "wlan1"
- ;;
-alfa-network,awusfree1|\
-edimax,br-6478ac-v2|\
-edimax,ew-7478apc)
- set_wifi_led "$boardname:blue:wlan"
- ;;
-alfa-network,tube-e4g)
- ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0"
- ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" "eth0"
- ;;
-allnet,all0256n-4m|\
-allnet,all0256n-8m)
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
- ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
- set_wifi_led "rt2800pci-phy0::radio"
- ;;
-alphanetworks,asl26555-8m|\
-alphanetworks,asl26555-16m)
- ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
- set_wifi_led "asl26555:green:wlan"
- ;;
-asus,rp-n53)
- ucidef_set_led_netdev "eth" "Network" "$boardname:white:back" "eth0"
- set_wifi_led "$boardname:blue:wifi"
- ;;
-asus,rt-n12p)
- ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0.1
- ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2
- set_wifi_led "$boardname:green:air"
- ;;
-asus,rt-n14u)
- ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" eth0.1
- ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2
- set_wifi_led "$boardname:blue:air"
- ;;
-bdcom,wap2100-sk)
- set_wifi_led "$boardname:green:wlan2g"
- ;;
-belkin,f9k1109v1)
- set_usb_led "$boardname:green:usb1"
- ucidef_set_led_netdev "lan" "lan" "$boardname:blue:wps" "eth0"
- ;;
-alfa-network,w502u|\
-dlink,dir-300-b1|\
-dlink,dir-300-b7|\
-dlink,dir-320-b1|\
-dlink,dir-600-b1|\
-dlink,dir-610-a1|\
-dlink,dir-615-d|\
-dlink,dir-615-h1|\
-dlink,dir-620-a1|\
-engenius,esr-9753|\
-hilink,hlk-rm04|\
-nexx,wt1520-4m|\
-nexx,wt1520-8m|\
-ralink,v11st-fe|\
-skyline,sl-r7205|\
-tenda,w306r-v2|\
-zyxel,keenetic-start|\
-zyxel,keenetic|\
-zyxel,nbg-419n-v2)
- set_wifi_led "rt2800pci-phy0::radio"
- ;;
-asus,rt-ac51u|\
-kingston,mlw221|\
-kingston,mlwg2|\
-rakwireless,rak633|\
-sanlinking,d240)
- set_wifi_led "$boardname:blue:wifi"
- ;;
-belkin,f5d8235-v1)
- set_wifi_led "$boardname:blue:wireless"
- ;;
-comfast,cf-wr800n)
- ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
- set_wifi_led "$boardname:white:wifi"
- ;;
-cudy,wr1000)
- ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
- ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08"
- ucidef_set_led_switch "lan2" "lan2" "$boardname:blue:lan2" "switch0" "0x04"
- ;;
-d-team,newifi-d2)
- ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10"
- ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0"
- ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1"
- ;;
-d-team,pbr-m1|\
-gehua,ghl-r-001)
- ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
- ;;
-dlink,dcs-930l-b1)
- ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps"
- ;;
-dlink,dir-620-d1|\
-dlink,dwr-116-a1|\
-head-weblink,hdrm200|\
-ohyeah,oy-0001|\
-planex,mzk-ex300np|\
-trendnet,tew-714tru|\
-zbtlink,zbt-wr8305rt|\
-zyxel,keenetic-omni|\
-zyxel,keenetic-omni-ii|\
-zyxel,keenetic-viva)
- set_wifi_led "$boardname:green:wifi"
- ;;
-dlink,dir-860l-b1)
- ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2"
- ;;
-dlink,dwr-118-a1)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1f"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x20"
- set_wifi_led "$boardname:green:wlan2g" "wlan1"
- ;;
-dlink,dwr-118-a2)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- set_wifi_led "$boardname:green:wlan2g" "wlan1"
- ;;
-dlink,dwr-921-c1|\
-dlink,dwr-922-e2)
- set_wifi_led "$boardname:green:wifi"
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
- ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link"
- ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx"
- ;;
-dovado,tiny-ac|\
-fon,fonera-20n)
- set_wifi_led "$boardname:orange:wifi"
- ;;
-edimax,3g-6200n|\
-edimax,br-6475nd|\
-planex,mzk-w300nh2)
- set_wifi_led "$boardname:amber:wlan"
- ;;
-edimax,ew-7476rpc|\
-edimax,ew-7478ac)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x20"
- ;;
-elecom,wrh-300cr)
- set_wifi_led "$boardname:green:wlan"
- ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0"
- ;;
-engenius,esr600)
- ucidef_set_led_netdev "wlan5g" "5.0GHz" "$boardname:blue:wlan5g" "wlan0"
- ucidef_set_led_netdev "wlan2g" "2.4GHz" "$boardname:blue:wlan2g" "wlan1"
- ;;
-glinet,gl-mt300a|\
-glinet,gl-mt300n|\
-glinet,gl-mt750)
- set_wifi_led "$boardname:wlan"
- ;;
-glinet,gl-mt300n-v2)
- set_wifi_led "$boardname:red:wlan"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x1"
- ;;
-gnubee,gb-pc1|\
-gnubee,gb-pc2)
- ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01"
- ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10"
- ;;
-hauppauge,broadway)
- set_wifi_led "$boardname:red:wps_active"
- ;;
-hiwifi,hc5661)
- ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
- set_wifi_led "$boardname:blue:wlan2g"
- ;;
-hiwifi,hc5661a|\
-hiwifi,hc5761a|\
-xzwifi,creativebox-v1)
- ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10"
- ;;
-hiwifi,hc5761)
- ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
- ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
- ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
- ;;
-hiwifi,hc5861)
- ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x20"
- ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
- ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
- ;;
-hnet,c108)
- ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
- ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0"
- ;;
-hootoo,ht-tm02)
- ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0"
- set_wifi_led "$boardname:blue:wlan"
- ;;
-huawei,hg255d)
- set_wifi_led "$boardname:green:wlan"
- ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
- ;;
-intenso,memory2move)
- set_wifi_led "$boardname:blue:wifi"
- ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0"
- ;;
-iodata,wn-ac1167gr|\
-iodata,wn-ac733gr3)
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "$boardname:green:wlan5g" "phy0radio"
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "$boardname:green:wlan2g" "phy1radio"
- ;;
-kimax,u25awf-h1)
- set_wifi_led "u25awf:red:wifi"
- ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
- ;;
-kimax,u35wf)
- set_wifi_led "$boardname:blue:wifi"
- ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
- ;;
-lava,lr-25g001)
- ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1"
- ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0"
- ;;
-lenovo,newifi-y1)
- ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1"
- ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0"
- ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x03"
- ;;
-lenovo,newifi-y1s)
- ucidef_set_led_netdev "wifi" "WIFI" "$boardname:yellow:wifi" "wlan1"
- ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0"
- ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
- ;;
-mediatek,linkit-smart-7688)
- ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt"
- ;;
-mikrotik,rbm11g)
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
- ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
- ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
- ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
- ;;
-mtc,wr1201)
- ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x0f"
- ;;
-netgear,ex2700|\
-netgear,wn3000rp-v3)
- set_wifi_led "$boardname:green:router"
- ;;
-netgear,ex3700)
- ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0"
- ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
- ;;
-netgear,r6120)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
- ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
- ;;
-netgear,r6220|\
-netgear,r6260|\
-netgear,r6350|\
-netgear,r6850|\
-netgear,wndr3700-v5)
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
- ;;
-omnima,hpm)
- ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
- set_wifi_led "$boardname:green:wifi"
- ;;
-omnima,miniembplug)
- set_wifi_led "$boardname:red:wlan"
- ;;
-phicomm,psg1208)
- set_wifi_led "$boardname:white:wlan2g"
- ;;
-planex,mzk-ex750np|\
-zbtlink,zbt-we826-e)
- set_wifi_led "$boardname:red:wifi"
- ;;
-tama,w06)
- ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
- ;;
-tplink,archer-c2-v1)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
- set_wifi_led "$boardname:green:wlan"
- ;;
-tplink,archer-c20-v1)
- ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
- ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
- ;;
-tplink,archer-c20-v4)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0"
- ;;
-tplink,archer-c20i)
- ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
- ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio"
- ;;
-tplink,archer-c50-v1)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1
- set_wifi_led "$boardname:green:wlan5g"
- ;;
-tplink,archer-c50-v3|\
-tplink,archer-c50-v4)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt"
- ;;
-tplink,archer-mr200)
- ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1"
- ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0"
- set_wifi_led "$boardname:white:wlan"
- ;;
-tplink,re350-v1|\
-tplink,re650-v1)
- ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
- ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
- ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "eth0" "tx rx"
- ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01"
- ;;
-tplink,tl-mr3020-v3)
- set_wifi_led "$boardname:green:wlan"
- ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
- ;;
-tplink,tl-mr3420-v5|\
-tplink,tl-wr842n-v5)
- ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ;;
-tplink,tl-wa801nd-v5)
- ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt"
- ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
- ;;
-tplink,tl-wr840n-v4)
- ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ;;
-tplink,tl-wr841n-v13)
- ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
- ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2"
- ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4"
- ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8"
- ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ;;
-tplink,tl-wr841n-v14)
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ;;
-tplink,tl-wr902ac-v3)
- ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
- ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10"
- ;;
-unielec,u7628-01-16m)
- ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2"
- ucidef_set_led_switch "lan2" "lan2" "u7628-01:green:lan2" "switch0" "0x4"
- ucidef_set_led_switch "lan3" "lan3" "u7628-01:green:lan3" "switch0" "0x8"
- ucidef_set_led_switch "lan4" "lan4" "u7628-01:green:lan4" "switch0" "0x10"
- ucidef_set_led_switch "wan" "wan" "u7628-01:green:wan" "switch0" "0x01"
- set_wifi_led "u7628-01:green:wlan"
- ;;
-vocore,vocore-8m|\
-vocore,vocore-16m)
- ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
- ;;
-wavlink,wl-wn570ha1)
- ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49"
- ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84"
- ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100"
- set_wifi_led "$boardname:green:wifi"
- ;;
-wavlink,wl-wn575a3)
- ucidef_set_rssimon "wlan1" "200000" "1"
- ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan1" "1" "49"
- ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84"
- ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100"
- ;;
-xiaomi,mir3g)
- ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08"
- ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08"
- ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
- ;;
-xiaomi,mir3p)
- ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x10" "0x08"
- ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08"
- ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
- ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08"
- ;;
-youhua,wr1200js)
- ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01"
- ;;
-youku,yk1)
- set_wifi_led "$boardname:blue:air"
- ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
- ;;
-zbtlink,zbt-ape522ii)
- ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
- ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
- ucidef_set_led_netdev "sys2" "wlan0" "$boardname:green:sys2" "wlan0" "tx rx"
- ;;
-zbtlink,zbt-wa05)
- set_wifi_led "$boardname:blue:air"
- ;;
-zbtlink,zbt-we826-16m|\
-zbtlink,zbt-we826-32m)
- set_wifi_led "zbt-we826:green:wifi"
- ;;
-zbtlink,zbt-we1026-5g-16m)
- ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
- set_wifi_led "we1026-5g:green:wifi"
- ;;
-zbtlink,zbt-we1226)
- set_wifi_led "$boardname:green:wlan"
- ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
- ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02"
- ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10"
- ;;
-zorlik,zl5900v2)
- ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0
- ;;
-zyxel,keenetic-extra-ii)
- set_wifi_led "$boardname:green:wifi"
- ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01"
- ;;
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
deleted file mode 100755
index 480726a870..0000000000
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ /dev/null
@@ -1,752 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /lib/functions/uci-defaults.sh
-. /lib/functions/system.sh
-
-ramips_setup_rt3x5x_vlans()
-{
- if [ ! -x /sbin/swconfig ]; then
- # legacy default
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- return
- fi
- local wanports=""
- local lanports=""
- for port in 5 4 3 2 1 0; do
- if [ "$(swconfig dev rt305x port $port get disable)" = "1" ]; then
- continue
- fi
- if [ "$(swconfig dev rt305x port $port get lan)" = "0" ]; then
- wanports="$port:wan $wanports"
- else
- lanports="$port:lan $lanports"
- fi
- done
- ucidef_add_switch "rt305x" $lanports $wanports "6t at eth0"
-}
-
-ramips_setup_interfaces()
-{
- local board="$1"
-
- case $board in
- accton,wr6202|\
- alfa-network,w502u|\
- netcore,nw718|\
- petatel,psr-680w|\
- skyline,sl-r7205|\
- upvel,ur-336un)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ;;
- adslr,g7|\
- afoundry,ew1200|\
- aigale,ai-br100|\
- alfa-network,ac1200rm|\
- asus,rt-n12p|\
- buffalo,whr-g300n|\
- d-team,pbr-m1|\
- dlink,dir-300-b7|\
- dlink,dir-320-b1|\
- dlink,dir-610-a1|\
- dlink,dir-810l|\
- dlink,dwr-116-a1|\
- dlink,dwr-921-c1|\
- dlink,dwr-922-e2|\
- edimax,3g-6200n|\
- firefly,firewrt|\
- hilink,hlk-rm04|\
- hiwifi,hc5661a|\
- hiwifi,hc5761a|\
- hiwifi,hc5962|\
- mediatek,ap-mt7621a-v60|\
- mediatek,mt7621-eval-board|\
- mediatek,mt7628an-eval-board|\
- mercury,mac1200r-v2|\
- mqmaker,witi|\
- mtc,wr1201|\
- netis,wf-2881|\
- nixcore,x1-16m|\
- nixcore,x1-8m|\
- ohyeah,oy-0001|\
- phicomm,k2p|\
- phicomm,psg1208|\
- phicomm,psg1218a|\
- planex,db-wrt01|\
- planex,mzk-750dhp|\
- planex,mzk-w300nh2|\
- planex,vr500|\
- samknows,whitebox-v8|\
- sanlinking,d240|\
- storylink,sap-g3200u3|\
- telco-electronics,x1|\
- totolink,a7000r|\
- totolink,lr1200|\
- unielec,u7621-06-16m|\
- unielec,u7621-06-64m|\
- wavlink,wl-wn570ha1|\
- wavlink,wl-wn575a3|\
- xiaomi,miwifi-mini|\
- xiaomi,miwifi-nano|\
- xiaoyu,xy-c5|\
- xzwifi,creativebox-v1|\
- youku,yk-l2|\
- youku,yk1|\
- zbtlink,zbt-ape522ii|\
- zbtlink,zbt-we1326|\
- zbtlink,zbt-we3526|\
- zbtlink,zbt-we826-16m|\
- zbtlink,zbt-we826-32m|\
- zbtlink,zbt-we826-e|\
- zbtlink,zbt-wg2626|\
- zbtlink,zbt-wg3526-16m|\
- zbtlink,zbt-wg3526-32m|\
- zbtlink,zbt-wr8305rt|\
- zyxel,keenetic|\
- zyxel,keenetic-omni)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6 at eth0"
- ;;
- airlink101,ar670w|\
- airlink101,ar725w|\
- asus,rt-ac51u|\
- rakwireless,rak633)
- ucidef_add_switch "switch0" \
- "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t at eth0"
- ;;
- alfa-network,awusfree1|\
- alfa-network,tube-e4g|\
- buffalo,wli-tx4-ag300n|\
- buffalo,wmr-300|\
- dlink,dap-1522-a1|\
- dlink,dch-m225|\
- d-team,pbr-d1|\
- elecom,wrh-300cr|\
- huawei,d105|\
- kimax,u25awf-h1|\
- loewe,wmdr-143n|\
- netgear,ex2700|\
- netgear,ex3700|\
- netgear,wn3000rp-v3|\
- omnima,hpm|\
- planex,cs-qr10|\
- planex,mzk-ex300np|\
- planex,mzk-ex750np|\
- ravpower,wd03|\
- sercomm,na930|\
- tama,w06|\
- tplink,tl-mr3020-v3|\
- tplink,tl-wr802n-v4)
- ucidef_set_interface_lan "eth0"
- ;;
- allnet,all0256n-4m|\
- allnet,all0256n-8m|\
- allnet,all5002|\
- allnet,all5003|\
- dlink,dcs-930l-b1|\
- dlink,dcs-930|\
- edimax,ew-7476rpc|\
- edimax,ew-7478ac|\
- hame,mpr-a2|\
- hauppauge,broadway|\
- hootoo,ht-tm02|\
- intenso,memory2move|\
- kimax,u35wf|\
- mediatek,linkit-smart-7688|\
- microduino,microwrt|\
- mikrotik,rbm11g|\
- netgear,wnce2001|\
- onion,omega2p|\
- onion,omega2|\
- tenda,3g150b|\
- tenda,3g300m|\
- tenda,w150m|\
- thunder,timecloud|\
- tplink,tl-wa801nd-v5|\
- unbranded,a5-v11|\
- wansview,ncs601w|\
- widora,neo-16m|\
- widora,neo-32m|\
- yukai,bocco|\
- zbtlink,zbt-cpe102|\
- zorlik,zl5900v2|\
- zte,q7)
- ucidef_add_switch "switch0"
- ucidef_add_switch_attr "switch0" "enable" "false"
- ucidef_set_interface_lan "eth0"
- ;;
- alphanetworks,asl26555-8m|\
- alphanetworks,asl26555-16m|\
- asus,rp-n53)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "6t at eth0"
- ;;
- argus,atp-52b|\
- asiarf,awm002-evb-4m|\
- asiarf,awm002-evb-8m|\
- asus,rt-ac57u|\
- asus,rt-n14u|\
- bdcom,wap2100-sk|\
- dlink,dir-645|\
- glinet,gl-mt300a|\
- glinet,gl-mt300n|\
- glinet,gl-mt750|\
- hilink,hlk-7628n|\
- hiwifi,hc5661|\
- hiwifi,hc5861b|\
- jcg,jhr-n805r|\
- jcg,jhr-n825r|\
- jcg,jhr-n926r|\
- mikrotik,rb750gr3|\
- mikrotik,rbm33g|\
- planex,mzk-wdpr|\
- skylab,skw92a|\
- tplink,archer-c20-v4|\
- tplink,archer-c20i|\
- tplink,archer-c50-v3|\
- tplink,archer-c50-v4|\
- tplink,tl-mr3420-v5|\
- tplink,tl-wr840n-v4|\
- tplink,tl-wr840n-v5|\
- tplink,tl-wr841n-v13|\
- tplink,tl-wr841n-v14|\
- tplink,tl-wr842n-v5|\
- unielec,u7628-01-16m|\
- ubiquiti,edgerouterx|\
- ubiquiti,edgerouterx-sfp|\
- upvel,ur-326n4g|\
- wrtnode,wrtnode|\
- wrtnode,wrtnode2p|\
- wrtnode,wrtnode2r|\
- youhua,wr1200js|\
- zbtlink,zbt-wa05|\
- zyxel,keenetic-extra-ii)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6 at eth0"
- ;;
- asiarf,ap7621-001)
- ucidef_add_switch "switch0" "0:lan" "4:wan" "6 at eth0"
- ;;
- asiarf,ap7621-nv1)
- ucidef_add_switch "switch0" "0:wan" "2:lan" "3:lan" "6 at eth0"
- ;;
- asiarf,awapn2403)
- ucidef_add_switch "switch0" \
- "0:lan" "1:wan" "6 at eth0"
- ;;
- asus,rt-ac65p|\
- asus,rt-ac85p|\
- dlink,dir-860l-b1|\
- elecom,wrc-1167ghbk2-s|\
- elecom,wrc-1900gst|\
- elecom,wrc-2533gst|\
- huawei,hg255d|\
- iodata,wn-ax1167gr|\
- iodata,wn-gx300gr|\
- iodata,wnpr2600g|\
- iptime,a604m)
- ucidef_add_switch "switch0" \
- "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6 at eth0"
- ;;
- asus,rt-n15|\
- belkin,f9k1109v1|\
- sitecom,wl-351)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5 at eth0"
- ;;
- asus,rt-n56u)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8 at eth0"
- ;;
- asus,wl-330n|\
- easyacc,wizard-8800|\
- kingston,mlwg2)
- ucidef_set_interface_lan "eth0.1"
- ;;
- aximcom,mr-102n|\
- kingston,mlw221)
- ucidef_set_interface_lan "eth0.2"
- ;;
- belkin,f5d8235-v1|\
- belkin,f5d8235-v2|\
- buffalo,wzr-agl300nh|\
- ralink,v11st-fe|\
- trendnet,tew-714tru)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5 at eth0"
- ;;
- buffalo,wcr-1166ds)
- ucidef_add_switch "switch0" \
- "3:lan" "4:wan" "6 at eth0"
- ;;
- buffalo,whr-300hp2|\
- buffalo,whr-600d|\
- buffalo,wsr-1166dhp|\
- buffalo,wsr-600dhp)
- ucidef_add_switch "switch0" \
- "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6 at eth0"
- ;;
- buffalo,whr-1166d)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6 at eth0"
- ;;
- comfast,cf-wr800n|\
- hnet,c108|\
- tplink,tl-wr902ac-v3|\
- trendnet,tew-638apb-v2)
- ucidef_add_switch "switch0" \
- "4:lan" "6 at eth0"
- ;;
- cudy,wr1000|\
- xiaomi,mir3g-v2)
- ucidef_add_switch "switch0" \
- "2:lan:2" "3:lan:1" "4:wan" "6 at eth0"
- ;;
- dlink,dir-510l|\
- glinet,vixmini|\
- netgear,ex6150|\
- tplink,re350-v1|\
- tplink,re650-v1)
- ucidef_add_switch "switch0" \
- "0:lan" "6 at eth0"
- ;;
- dlink,dir-615-h1|\
- d-team,newifi-d2|\
- wevo,11acnas|\
- wevo,w2914ns-v2|\
- zbtlink,zbt-we2026)
- ucidef_add_switch "switch0" \
- "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6 at eth0"
- ;;
- dlink,dwr-118-a1)
- ucidef_add_switch "switch0" \
- "1:lan:2" "2:lan:3" "3:lan:1" "4:lan:0" "5:wan" "6 at eth0"
- ;;
- dlink,dwr-118-a2)
- ucidef_add_switch "switch0" \
- "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6 at eth0"
- ;;
- duzun,dm06)
- ucidef_add_switch "switch0" \
- "1:lan" "0:wan" "6 at eth0"
- ;;
- edimax,br-6475nd)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9 at eth0"
- ;;
- edimax,br-6478ac-v2|\
- tplink,archer-c2-v1)
- ucidef_add_switch "switch1" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6 at eth0"
- ;;
- engenius,esr600)
- ucidef_add_switch "switch0" \
- "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "0 at eth0"
- ;;
- fon,fon2601)
- ucidef_add_switch "switch0" \
- "0:lan" "4:wan" "6 at eth0"
- ;;
- edimax,rg21s)
- ucidef_add_switch "switch0" \
- "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6 at eth0"
- ;;
- gehua,ghl-r-001)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "4:wan" "6 at eth0"
- ;;
- glinet,gl-mt300n-v2)
- ucidef_add_switch "switch0" \
- "1:lan" "0:wan" "6 at eth0"
- ;;
- gnubee,gb-pc1|\
- gnubee,gb-pc2)
- ucidef_add_switch "switch0" \
- "0:lan" "4:lan" "6 at eth0"
- ;;
- head-weblink,hdrm200)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6 at eth0"
- ;;
- hiwifi,hc5761)
- ucidef_add_switch "switch0" \
- "1:lan" "4:lan" "0:wan" "6 at eth0"
- ;;
- hiwifi,hc5861)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "5:wan" "6 at eth0"
- ;;
- iodata,wn-ac1167gr|\
- iodata,wn-ac733gr3)
- ucidef_add_switch "switch1" \
- "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6 at eth0"
- ;;
- iptime,a3)
- ucidef_add_switch "switch0" \
- "2:lan:2" "3:lan:1" "0:wan" "6 at eth0"
- ;;
- lava,lr-25g001|\
- sitecom,wlr-6000|\
- trendnet,tew-691gr|\
- trendnet,tew-692gr)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0 at eth0"
- ;;
- lenovo,newifi-d1)
- ucidef_add_switch "switch0" \
- "1:lan:2" "2:lan:1" "4:wan" "6 at eth0"
- ;;
- lenovo,newifi-y1|\
- zbtlink,zbt-we1226)
- ucidef_add_switch "switch0" \
- "0:lan:2" "1:lan:1" "4:wan" "6 at eth0"
- ;;
- lenovo,newifi-y1s)
- ucidef_add_switch "switch0" \
- "1:lan:4" "2:lan:3" "4:lan:2" "5:lan:1" "0:wan" "6 at eth0"
- ;;
- linksys,e1700|\
- ralink,mt7620a-mt7530-evb)
- ucidef_add_switch "switch1" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6 at eth0"
- ;;
- linksys,re6500)
- ucidef_add_switch "switch0" \
- "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6 at eth0"
- ;;
- netgear,r6120|\
- netgear,r6220|\
- netgear,r6260|\
- netgear,r6350|\
- netgear,r6850|\
- netgear,wndr3700-v5)
- ucidef_add_switch "switch0" \
- "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6 at eth0"
- ;;
- nexx,wt1520-4m|\
- nexx,wt1520-8m|\
- vonets,var11n-300)
- ucidef_add_switch "switch0" \
- "0:lan" "4:wan" "6 at eth0"
- ;;
- nexx,wt3020-4m|\
- nexx,wt3020-8m)
- ucidef_add_switch "switch0" \
- "4:lan" "0:wan" "6 at eth0"
- ;;
- phicomm,k2g)
- ucidef_add_switch "switch0" \
- "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6 at eth0"
- ;;
- phicomm,psg1218b)
- ucidef_add_switch "switch0" \
- "0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6 at eth0"
- ;;
- planex,mzk-dp150n|\
- vocore,vocore-8m|\
- vocore,vocore-16m)
- ucidef_add_switch "switch0" \
- "0:lan" "4:lan" "6t at eth0"
- ;;
- samsung,cy-swr1100)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9 at eth0"
- ;;
- sparklan,wcr-150gn|\
- zbtlink,zbt-we1026-5g-16m)
- ucidef_add_switch "switch0" \
- "0:lan" "6t at eth0"
- ;;
- tplink,archer-c20-v1|\
- tplink,archer-c50-v1)
- ucidef_add_switch "switch0" \
- "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6 at eth0"
- ;;
- tplink,archer-mr200)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "6t at eth0"
- ucidef_set_interface_wan "usb0"
- ;;
- vocore,vocore2|\
- vocore,vocore2-lite)
- ucidef_add_switch "switch0" \
- "0:lan" "2:lan" "6t at eth0"
- ;;
- wiznet,wizfi630a)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:wan" "6 at eth0"
- ;;
- wiznet,wizfi630s)
- ucidef_add_switch "switch0" \
- "0:wan" "3:lan" "4:lan" "6 at eth0"
- ;;
- xiaomi,mir3g)
- ucidef_add_switch "switch0" \
- "2:lan:2" "3:lan:1" "1:wan" "6t at eth0"
- ;;
- xiaomi,mir3p)
- ucidef_add_switch "switch0" \
- "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6 at eth0"
- ;;
- xiaomi,mir4a-100m)
- ucidef_add_switch "switch0" \
- "4:lan:1" "2:lan:2" "0:wan" "6 at eth0"
- ;;
- zyxel,keenetic-omni-ii)
- ucidef_add_switch "switch0" \
- "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6 at eth0"
- ;;
- zyxel,keenetic-start)
- ucidef_add_switch "switch0" \
- "0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6 at eth0"
- ;;
- zyxel,keenetic-viva)
- ucidef_add_switch "switch1" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t at eth0"
- ;;
- *)
- RT3X5X=$(grep -E "(RT3.5|RT5350)" /proc/cpuinfo)
- if [ -n "${RT3X5X}" ]; then
- ramips_setup_rt3x5x_vlans
- else
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- fi
- ;;
- esac
-}
-
-ramips_setup_macs()
-{
- local board="$1"
- local lan_mac=""
- local wan_mac=""
-
- case $board in
- 8devices,carambola|\
- alfa-network,w502u|\
- arcwireless,freestation5|\
- lenovo,newifi-y1|\
- lenovo,newifi-y1s|\
- netgear,wnce2001|\
- ohyeah,oy-0001|\
- phicomm,k2g|\
- skylab,skw92a|\
- totolink,lr1200)
- wan_mac=$(mtd_get_mac_binary factory 0x2e)
- ;;
- dlink,dir-300-b7|\
- dlink,dir-320-b1|\
- dlink,dir-620-a1|\
- engenius,esr-9753|\
- hame,mpr-a1|\
- hauppauge,broadway|\
- huawei,d105|\
- hilink,hlk-7628n|\
- hilink,hlk-rm04|\
- nexaira,bc2|\
- petatel,psr-680w|\
- skyline,sl-r7205)
- lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
- wan_mac=$(macaddr_add "$lan_mac" 1)
- ;;
- asus,rt-ac57u|\
- d-team,newifi-d2|\
- d-team,pbr-m1|\
- elecom,wrc-1167ghbk2-s|\
- elecom,wrc-1900gst|\
- elecom,wrc-2533gst|\
- lenovo,newifi-d1|\
- phicomm,k2p|\
- planex,vr500|\
- samknows,whitebox-v8|\
- youhua,wr1200js|\
- youku,yk-l2|\
- zbtlink,zbt-we3526)
- wan_mac=$(mtd_get_mac_binary factory 0xe006)
- ;;
- asus,rt-ac65p|\
- asus,rt-ac85p)
- wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
- label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
- ;;
- asus,rt-n56u)
- lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
- wan_mac=$(mtd_get_mac_binary factory 0x8004)
- ;;
- belkin,f9k1109v1)
- wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC)
- lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC)
- label_mac=$wan_mac
- ;;
- buffalo,wcr-1166ds|\
- buffalo,wsr-1166dhp)
- local index="$(find_mtd_index "board_data")"
- wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
- lan_mac=$wan_mac
- ;;
- buffalo,whr-1166d|\
- buffalo,whr-300hp2|\
- buffalo,whr-600d|\
- buffalo,whr-g300n|\
- buffalo,wsr-600dhp|\
- glinet,gl-mt300n-v2|\
- xiaomi,miwifi-mini|\
- zyxel,keenetic-start)
- # This empty case has to be kept for devices without any MAC address adjustments
- ;;
- cudy,wr1000)
- wan_mac=$(mtd_get_mac_binary factory 0x2e)
- label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
- ;;
- dlink,dch-m225|\
- samsung,cy-swr1100)
- lan_mac=$(mtd_get_mac_ascii factory lanmac)
- ;;
- dlink,dir-510l|\
- dlink,dwr-116-a1|\
- dlink,dwr-118-a1|\
- dlink,dwr-118-a2|\
- dlink,dwr-921-c1|\
- dlink,dwr-922-e2|\
- lava,lr-25g001)
- wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
- lan_mac=$(macaddr_add "$wan_mac" 1)
- label_mac=$wan_mac
- ;;
- dlink,dir-615-d|\
- dlink,dir-615-h1|\
- glinet,gl-mt300a|\
- glinet,gl-mt300n|\
- glinet,gl-mt750|\
- zbtlink,zbt-wg3526-16m|\
- zbtlink,zbt-wg3526-32m)
- wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
- label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
- ;;
- dlink,dir-645)
- lan_mac=$(mtd_get_mac_ascii nvram lanmac)
- wan_mac=$(mtd_get_mac_ascii nvram wanmac)
- ;;
- dlink,dir-860l-b1)
- lan_mac=$(mtd_get_mac_ascii factory lanmac)
- wan_mac=$(mtd_get_mac_ascii factory wanmac)
- label_mac=$(cat /sys/class/ieee80211/phy1/macaddress)
- ;;
- dovado,tiny-ac)
- lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
- wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR)
- ;;
- edimax,br-6475nd)
- wan_mac=$(mtd_get_mac_binary devdata 0x7)
- ;;
- edimax,br-6478ac-v2|\
- netgear,r6260|\
- netgear,r6350|\
- netgear,r6850)
- wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
- ;;
- edimax,rg21s|\
- engenius,esr600)
- lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
- wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
- ;;
- hiwifi,hc5661|\
- hiwifi,hc5661a|\
- hiwifi,hc5761|\
- hiwifi,hc5761a|\
- hiwifi,hc5861|\
- hiwifi,hc5861b|\
- hiwifi,hc5962)
- lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
- label_mac=$lan_mac
- [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
- wan_mac=$(macaddr_add "$lan_mac" 1)
- ;;
- iodata,wn-ac1167gr|\
- iodata,wn-ac733gr3)
- wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
- ;;
- iodata,wn-ax1167gr|\
- iodata,wn-gx300gr|\
- trendnet,tew-692gr)
- wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
- ;;
- iodata,wnpr2600g)
- wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
- label_mac=$wan_mac
- ;;
- iptime,a3|\
- iptime,a604m)
- wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40)
- ;;
- linksys,e1700)
- wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
- ;;
- mediatek,linkit-smart-7688|\
- onion,omega2|\
- onion,omega2p)
- wan_mac=$(mtd_get_mac_binary factory 0x4)
- lan_mac=$(mtd_get_mac_binary factory 0x2e)
- ;;
- mercury,mac1200r-v2)
- wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory_info 0xd)" 1)
- ;;
- poray,m3|\
- poray,m4-4m|\
- poray,m4-8m|\
- poray,x5|\
- poray,x8)
- lan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" -2)
- ;;
- sitecom,wlr-6000)
- wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x8004)" 2)
- ;;
- sparklan,wcr-150gn|\
- wiznet,wizfi630a|\
- zyxel,keenetic-omni|\
- zyxel,keenetic-omni-ii|\
- zyxel,keenetic-viva)
- wan_mac=$(mtd_get_mac_binary factory 0x28)
- ;;
- tenda,w306r-v2)
- wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 5)
- ;;
- trendnet,tew-691gr)
- wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 3)
- ;;
- vocore,vocore2|\
- vocore,vocore2-lite)
- label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
- ;;
- xiaomi,mir3g)
- lan_mac=$(mtd_get_mac_binary factory 0xe006)
- ;;
- xiaomi,mir3g-v2)
- wan_mac=$(mtd_get_mac_binary factory 0xe006)
- label_mac=$wan_mac
- ;;
- xiaomi,mir3p)
- lan_mac=$(mtd_get_mac_binary factory 0xe006)
- label_mac=$lan_mac
- ;;
- zbtlink,zbt-we1326)
- wan_mac=$(mtd_get_mac_binary factory 0xe006)
- label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
- ;;
- *)
- wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
- ;;
- esac
-
- [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
- [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
- [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
-}
-
-board_config_update
-board=$(board_name)
-ramips_setup_interfaces $board
-ramips_setup_macs $board
-board_config_flush
-
-exit 0
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..45d08043d7
--- /dev/null
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
@@ -0,0 +1,222 @@
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+ ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+aigale,ai-br100)
+ ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2"
+ set_wifi_led "$boardname:blue:wlan"
+ ;;
+alfa-network,ac1200rm)
+ set_wifi_led "$boardname:green:wlan2g" "wlan1"
+ ;;
+alfa-network,tube-e4g)
+ ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" "eth0"
+ ;;
+asus,rp-n53)
+ ucidef_set_led_netdev "eth" "Network" "$boardname:white:back" "eth0"
+ set_wifi_led "$boardname:blue:wifi"
+ ;;
+asus,rt-n12p)
+ ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0.1
+ ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2
+ set_wifi_led "$boardname:green:air"
+ ;;
+asus,rt-n14u)
+ ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" eth0.1
+ ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2
+ set_wifi_led "$boardname:blue:air"
+ ;;
+asus,rt-ac51u|\
+kingston,mlw221|\
+kingston,mlwg2|\
+sanlinking,d240)
+ set_wifi_led "$boardname:blue:wifi"
+ ;;
+bdcom,wap2100-sk)
+ set_wifi_led "$boardname:green:wlan2g"
+ ;;
+comfast,cf-wr800n)
+ ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
+ set_wifi_led "$boardname:white:wifi"
+ ;;
+dlink,dwr-116-a1|\
+head-weblink,hdrm200|\
+ohyeah,oy-0001|\
+planex,mzk-ex300np|\
+zbtlink,zbt-wr8305rt|\
+zyxel,keenetic-omni|\
+zyxel,keenetic-omni-ii|\
+zyxel,keenetic-viva)
+ set_wifi_led "$boardname:green:wifi"
+ ;;
+dlink,dwr-118-a1)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1f"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x20"
+ set_wifi_led "$boardname:green:wlan2g" "wlan1"
+ ;;
+dlink,dwr-118-a2)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ set_wifi_led "$boardname:green:wlan2g" "wlan1"
+ ;;
+dlink,dwr-921-c1|\
+dlink,dwr-922-e2)
+ set_wifi_led "$boardname:green:wifi"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
+ ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link"
+ ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx"
+ ;;
+dovado,tiny-ac)
+ set_wifi_led "$boardname:orange:wifi"
+ ;;
+edimax,br-6478ac-v2|\
+edimax,ew-7478apc)
+ set_wifi_led "$boardname:blue:wlan"
+ ;;
+edimax,ew-7476rpc|\
+edimax,ew-7478ac)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x20"
+ ;;
+elecom,wrh-300cr)
+ set_wifi_led "$boardname:green:wlan"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0"
+ ;;
+engenius,esr600)
+ ucidef_set_led_netdev "wlan5g" "5.0GHz" "$boardname:blue:wlan5g" "wlan0"
+ ucidef_set_led_netdev "wlan2g" "2.4GHz" "$boardname:blue:wlan2g" "wlan1"
+ ;;
+glinet,gl-mt300a|\
+glinet,gl-mt300n|\
+glinet,gl-mt750)
+ set_wifi_led "$boardname:wlan"
+ ;;
+hiwifi,hc5661)
+ ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
+ set_wifi_led "$boardname:blue:wlan2g"
+ ;;
+hiwifi,hc5761)
+ ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
+ ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
+ ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
+ ;;
+hiwifi,hc5861)
+ ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x20"
+ ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
+ ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
+ ;;
+hnet,c108)
+ ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
+ ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0"
+ ;;
+iodata,wn-ac1167gr|\
+iodata,wn-ac733gr3)
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$boardname:green:wlan5g" "phy0radio"
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "$boardname:green:wlan2g" "phy1radio"
+ ;;
+kimax,u25awf-h1)
+ set_wifi_led "u25awf:red:wifi"
+ ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
+ ;;
+kimax,u35wf)
+ set_wifi_led "$boardname:blue:wifi"
+ ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
+ ;;
+lava,lr-25g001)
+ ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1"
+ ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0"
+ ;;
+lenovo,newifi-y1)
+ ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1"
+ ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0"
+ ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x03"
+ ;;
+lenovo,newifi-y1s)
+ ucidef_set_led_netdev "wifi" "WIFI" "$boardname:yellow:wifi" "wlan1"
+ ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0"
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
+ ;;
+netgear,ex2700|\
+netgear,wn3000rp-v3)
+ set_wifi_led "$boardname:green:router"
+ ;;
+netgear,ex3700)
+ ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0"
+ ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
+ ;;
+phicomm,psg1208)
+ set_wifi_led "$boardname:white:wlan2g"
+ ;;
+planex,mzk-ex750np|\
+zbtlink,zbt-we826-e)
+ set_wifi_led "$boardname:red:wifi"
+ ;;
+tplink,archer-c2-v1)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
+ set_wifi_led "$boardname:green:wlan"
+ ;;
+tplink,archer-c20-v1)
+ ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
+ ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
+ ;;
+tplink,archer-c20i)
+ ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
+ ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio"
+ ;;
+tplink,archer-c50-v1)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1
+ set_wifi_led "$boardname:green:wlan5g"
+ ;;
+tplink,archer-mr200)
+ ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1"
+ ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0"
+ set_wifi_led "$boardname:white:wlan"
+ ;;
+youku,yk1)
+ set_wifi_led "$boardname:blue:air"
+ ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
+ ;;
+zbtlink,zbt-ape522ii)
+ ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
+ ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
+ ucidef_set_led_netdev "sys2" "wlan0" "$boardname:green:sys2" "wlan0" "tx rx"
+ ;;
+zbtlink,zbt-wa05)
+ set_wifi_led "$boardname:blue:air"
+ ;;
+zbtlink,zbt-we826-16m|\
+zbtlink,zbt-we826-32m)
+ set_wifi_led "zbt-we826:green:wifi"
+ ;;
+zbtlink,zbt-we1026-5g-16m)
+ ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
+ set_wifi_led "we1026-5g:green:wifi"
+ ;;
+zbtlink,zbt-we2026)
+ set_wifi_led "$boardname:green:wlan"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..db1f4de2a7
--- /dev/null
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
@@ -0,0 +1,297 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_interfaces()
+{
+ local board="$1"
+
+ case $board in
+ aigale,ai-br100|\
+ alfa-network,ac1200rm|\
+ asus,rt-n12p|\
+ dlink,dir-810l|\
+ dlink,dwr-116-a1|\
+ dlink,dwr-921-c1|\
+ dlink,dwr-922-e2|\
+ ohyeah,oy-0001|\
+ phicomm,psg1208|\
+ phicomm,psg1218a|\
+ planex,db-wrt01|\
+ planex,mzk-750dhp|\
+ sanlinking,d240|\
+ xiaomi,miwifi-mini|\
+ youku,yk1|\
+ zbtlink,zbt-ape522ii|\
+ zbtlink,zbt-we826-16m|\
+ zbtlink,zbt-we826-32m|\
+ zbtlink,zbt-we826-e|\
+ zbtlink,zbt-wr8305rt|\
+ zyxel,keenetic-omni)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6 at eth0"
+ ;;
+ alfa-network,tube-e4g|\
+ buffalo,wmr-300|\
+ dlink,dch-m225|\
+ elecom,wrh-300cr|\
+ kimax,u25awf-h1|\
+ netgear,ex2700|\
+ netgear,ex3700|\
+ netgear,wn3000rp-v3|\
+ planex,cs-qr10|\
+ planex,mzk-ex300np|\
+ planex,mzk-ex750np|\
+ ravpower,wd03|\
+ sercomm,na930)
+ ucidef_set_interface_lan "eth0"
+ ;;
+ asus,rp-n53)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "6t at eth0"
+ ;;
+ asus,rt-ac51u)
+ ucidef_add_switch "switch0" \
+ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t at eth0"
+ ;;
+ asus,rt-n14u|\
+ bdcom,wap2100-sk|\
+ glinet,gl-mt300a|\
+ glinet,gl-mt300n|\
+ glinet,gl-mt750|\
+ hiwifi,hc5661|\
+ tplink,archer-c20i|\
+ wrtnode,wrtnode|\
+ zbtlink,zbt-wa05)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6 at eth0"
+ ;;
+ buffalo,whr-300hp2|\
+ buffalo,whr-600d)
+ ucidef_add_switch "switch0" \
+ "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6 at eth0"
+ ;;
+ buffalo,whr-1166d)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6 at eth0"
+ ;;
+ comfast,cf-wr800n|\
+ hnet,c108)
+ ucidef_add_switch "switch0" \
+ "4:lan" "6 at eth0"
+ ;;
+ dlink,dir-510l)
+ ucidef_add_switch "switch0" \
+ "0:lan" "6 at eth0"
+ ;;
+ dlink,dwr-118-a1)
+ ucidef_add_switch "switch0" \
+ "1:lan:2" "2:lan:3" "3:lan:1" "4:lan:0" "5:wan" "6 at eth0"
+ ;;
+ dlink,dwr-118-a2)
+ ucidef_add_switch "switch0" \
+ "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6 at eth0"
+ ;;
+ edimax,br-6478ac-v2|\
+ tplink,archer-c2-v1)
+ ucidef_add_switch "switch1" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6 at eth0"
+ ;;
+ edimax,ew-7476rpc|\
+ edimax,ew-7478ac|\
+ kimax,u35wf|\
+ microduino,microwrt|\
+ yukai,bocco|\
+ zbtlink,zbt-cpe102|\
+ zte,q7)
+ ucidef_add_switch "switch0"
+ ucidef_add_switch_attr "switch0" "enable" "false"
+ ucidef_set_interface_lan "eth0"
+ ;;
+ engenius,esr600)
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "0 at eth0"
+ ;;
+ fon,fon2601)
+ ucidef_add_switch "switch0" \
+ "0:lan" "4:wan" "6 at eth0"
+ ;;
+ head-weblink,hdrm200)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6 at eth0"
+ ;;
+ hiwifi,hc5761)
+ ucidef_add_switch "switch0" \
+ "1:lan" "4:lan" "0:wan" "6 at eth0"
+ ;;
+ hiwifi,hc5861)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "5:wan" "6 at eth0"
+ ;;
+ iodata,wn-ac1167gr|\
+ iodata,wn-ac733gr3)
+ ucidef_add_switch "switch1" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6 at eth0"
+ ;;
+ kingston,mlw221)
+ ucidef_set_interface_lan "eth0.2"
+ ;;
+ kingston,mlwg2)
+ ucidef_set_interface_lan "eth0.1"
+ ;;
+ lava,lr-25g001)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0 at eth0"
+ ;;
+ lenovo,newifi-y1)
+ ucidef_add_switch "switch0" \
+ "0:lan:2" "1:lan:1" "4:wan" "6 at eth0"
+ ;;
+ lenovo,newifi-y1s)
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "4:lan:2" "5:lan:1" "0:wan" "6 at eth0"
+ ;;
+ linksys,e1700|\
+ ralink,mt7620a-mt7530-evb)
+ ucidef_add_switch "switch1" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6 at eth0"
+ ;;
+ nexx,wt3020-4m|\
+ nexx,wt3020-8m)
+ ucidef_add_switch "switch0" \
+ "4:lan" "0:wan" "6 at eth0"
+ ;;
+ phicomm,k2g)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6 at eth0"
+ ;;
+ phicomm,psg1218b)
+ ucidef_add_switch "switch0" \
+ "0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6 at eth0"
+ ;;
+ tplink,archer-c20-v1|\
+ tplink,archer-c50-v1)
+ ucidef_add_switch "switch0" \
+ "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6 at eth0"
+ ;;
+ tplink,archer-mr200)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "6t at eth0"
+ ucidef_set_interface_wan "usb0"
+ ;;
+ vonets,var11n-300)
+ ucidef_add_switch "switch0" \
+ "0:lan" "4:wan" "6 at eth0"
+ ;;
+ zbtlink,zbt-we1026-5g-16m)
+ ucidef_add_switch "switch0" \
+ "0:lan" "6t at eth0"
+ ;;
+ zbtlink,zbt-we2026)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6 at eth0"
+ ;;
+ zyxel,keenetic-omni-ii)
+ ucidef_add_switch "switch0" \
+ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6 at eth0"
+ ;;
+ zyxel,keenetic-viva)
+ ucidef_add_switch "switch1" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t at eth0"
+ ;;
+ *)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+ esac
+}
+
+ramips_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
+
+ case $board in
+ buffalo,whr-1166d|\
+ buffalo,whr-300hp2|\
+ buffalo,whr-600d|\
+ xiaomi,miwifi-mini)
+ # This empty case has to be kept for devices without any MAC address adjustments
+ ;;
+ dlink,dch-m225)
+ lan_mac=$(mtd_get_mac_ascii factory lanmac)
+ ;;
+ dlink,dir-510l|\
+ dlink,dwr-116-a1|\
+ dlink,dwr-118-a1|\
+ dlink,dwr-118-a2|\
+ dlink,dwr-921-c1|\
+ dlink,dwr-922-e2|\
+ lava,lr-25g001)
+ wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
+ lan_mac=$(macaddr_add "$wan_mac" 1)
+ label_mac=$wan_mac
+ ;;
+ dovado,tiny-ac)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR)
+ ;;
+ edimax,br-6478ac-v2)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+ ;;
+ engenius,esr600)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+ ;;
+ glinet,gl-mt300a|\
+ glinet,gl-mt300n|\
+ glinet,gl-mt750)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ hiwifi,hc5661|\
+ hiwifi,hc5761|\
+ hiwifi,hc5861)
+ lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
+ label_mac=$lan_mac
+ [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ iodata,wn-ac1167gr|\
+ iodata,wn-ac733gr3)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+ ;;
+ lenovo,newifi-y1|\
+ lenovo,newifi-y1s|\
+ ohyeah,oy-0001|\
+ phicomm,k2g)
+ wan_mac=$(mtd_get_mac_binary factory 0x2e)
+ ;;
+ linksys,e1700)
+ wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
+ ;;
+ zyxel,keenetic-omni|\
+ zyxel,keenetic-omni-ii|\
+ zyxel,keenetic-viva)
+ wan_mac=$(mtd_get_mac_binary factory 0x28)
+ ;;
+ *)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches
new file mode 100755
index 0000000000..85380d84a8
--- /dev/null
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+dlink,dir-510l)
+ ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0"
+ ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1"
+ ;;
+head-weblink,hdrm200)
+ ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "0"
+ ucidef_add_gpio_switch "io1" "I/O 1" "1"
+ ucidef_add_gpio_switch "io2" "I/O 2" "2"
+ ucidef_add_gpio_switch "io3" "I/O 3" "11"
+ ucidef_add_gpio_switch "io4" "I/O 4" "14"
+ ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "21" "1"
+ ;;
+zbtlink,zbt-we826-e)
+ ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "13"
+ ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "14" "1"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
similarity index 100%
rename from target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
rename to target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
diff --git a/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh
new file mode 100755
index 0000000000..786d57fc70
--- /dev/null
+++ b/target/linux/ramips/mt7620/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..4eab8f42fe
--- /dev/null
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -0,0 +1,83 @@
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+ ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+d-team,newifi-d2)
+ ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10"
+ ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0"
+ ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1"
+ ;;
+d-team,pbr-m1|\
+gehua,ghl-r-001)
+ ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
+ ;;
+dlink,dir-860l-b1)
+ ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2"
+ ;;
+gnubee,gb-pc1|\
+gnubee,gb-pc2)
+ ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01"
+ ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10"
+ ;;
+mikrotik,rbm11g)
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
+ ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
+ ;;
+mtc,wr1201)
+ ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x0f"
+ ;;
+netgear,r6220|\
+netgear,r6260|\
+netgear,r6350|\
+netgear,r6850|\
+netgear,wndr3700-v5)
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
+ ;;
+tplink,re350-v1|\
+tplink,re650-v1)
+ ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
+ ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
+ ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "eth0" "tx rx"
+ ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01"
+ ;;
+xiaomi,mir3g)
+ ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08"
+ ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08"
+ ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
+ ;;
+xiaomi,mir3p)
+ ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x10" "0x08"
+ ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08"
+ ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
+ ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08"
+ ;;
+xzwifi,creativebox-v1)
+ ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10"
+ ;;
+youhua,wr1200js)
+ ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..11cf27e092
--- /dev/null
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -0,0 +1,238 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_interfaces()
+{
+ local board="$1"
+
+ case $board in
+ adslr,g7|\
+ afoundry,ew1200|\
+ d-team,pbr-m1|\
+ firefly,firewrt|\
+ hiwifi,hc5962|\
+ mediatek,ap-mt7621a-v60|\
+ mediatek,mt7621-eval-board|\
+ mqmaker,witi|\
+ mtc,wr1201|\
+ netis,wf-2881|\
+ phicomm,k2p|\
+ planex,vr500|\
+ samknows,whitebox-v8|\
+ storylink,sap-g3200u3|\
+ telco-electronics,x1|\
+ totolink,a7000r|\
+ unielec,u7621-06-16m|\
+ unielec,u7621-06-64m|\
+ xiaoyu,xy-c5|\
+ xzwifi,creativebox-v1|\
+ youku,yk-l2|\
+ zbtlink,zbt-we1326|\
+ zbtlink,zbt-we3526|\
+ zbtlink,zbt-wg2626|\
+ zbtlink,zbt-wg3526-16m|\
+ zbtlink,zbt-wg3526-32m)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6 at eth0"
+ ;;
+ asiarf,ap7621-001)
+ ucidef_add_switch "switch0" "0:lan" "4:wan" "6 at eth0"
+ ;;
+ asiarf,ap7621-nv1)
+ ucidef_add_switch "switch0" "0:wan" "2:lan" "3:lan" "6 at eth0"
+ ;;
+ asus,rt-ac57u|\
+ mikrotik,rb750gr3|\
+ mikrotik,rbm33g|\
+ ubiquiti,edgerouterx|\
+ ubiquiti,edgerouterx-sfp|\
+ youhua,wr1200js)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6 at eth0"
+ ;;
+ asus,rt-ac65p|\
+ asus,rt-ac85p|\
+ dlink,dir-860l-b1|\
+ elecom,wrc-1167ghbk2-s|\
+ elecom,wrc-1900gst|\
+ elecom,wrc-2533gst|\
+ iodata,wn-ax1167gr|\
+ iodata,wn-gx300gr|\
+ iodata,wnpr2600g)
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6 at eth0"
+ ;;
+ buffalo,wsr-1166dhp|\
+ buffalo,wsr-600dhp)
+ ucidef_add_switch "switch0" \
+ "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6 at eth0"
+ ;;
+ d-team,newifi-d2|\
+ wevo,11acnas|\
+ wevo,w2914ns-v2)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6 at eth0"
+ ;;
+ edimax,rg21s)
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6 at eth0"
+ ;;
+ gehua,ghl-r-001)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "4:wan" "6 at eth0"
+ ;;
+ gnubee,gb-pc1|\
+ gnubee,gb-pc2)
+ ucidef_add_switch "switch0" \
+ "0:lan" "4:lan" "6 at eth0"
+ ;;
+ lenovo,newifi-d1)
+ ucidef_add_switch "switch0" \
+ "1:lan:2" "2:lan:1" "4:wan" "6 at eth0"
+ ;;
+ linksys,re6500)
+ ucidef_add_switch "switch0" \
+ "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6 at eth0"
+ ;;
+ mikrotik,rbm11g|\
+ thunder,timecloud)
+ ucidef_add_switch "switch0"
+ ucidef_add_switch_attr "switch0" "enable" "false"
+ ucidef_set_interface_lan "eth0"
+ ;;
+ netgear,ex6150|\
+ tplink,re350-v1|\
+ tplink,re650-v1)
+ ucidef_add_switch "switch0" \
+ "0:lan" "6 at eth0"
+ ;;
+ netgear,r6220|\
+ netgear,r6260|\
+ netgear,r6350|\
+ netgear,r6850|\
+ netgear,wndr3700-v5)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6 at eth0"
+ ;;
+ xiaomi,mir3g)
+ ucidef_add_switch "switch0" \
+ "2:lan:2" "3:lan:1" "1:wan" "6t at eth0"
+ ;;
+ xiaomi,mir3g-v2)
+ ucidef_add_switch "switch0" \
+ "2:lan:2" "3:lan:1" "4:wan" "6 at eth0"
+ ;;
+ xiaomi,mir3p)
+ ucidef_add_switch "switch0" \
+ "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6 at eth0"
+ ;;
+ *)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+ esac
+}
+
+ramips_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
+
+ case $board in
+ asus,rt-ac57u|\
+ d-team,newifi-d2|\
+ d-team,pbr-m1|\
+ elecom,wrc-1167ghbk2-s|\
+ elecom,wrc-1900gst|\
+ elecom,wrc-2533gst|\
+ lenovo,newifi-d1|\
+ phicomm,k2p|\
+ planex,vr500|\
+ samknows,whitebox-v8|\
+ youhua,wr1200js|\
+ youku,yk-l2|\
+ zbtlink,zbt-we3526)
+ wan_mac=$(mtd_get_mac_binary factory 0xe006)
+ ;;
+ asus,rt-ac65p|\
+ asus,rt-ac85p)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ buffalo,wsr-1166dhp)
+ local index="$(find_mtd_index "board_data")"
+ wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
+ lan_mac=$wan_mac
+ ;;
+ buffalo,wsr-600dhp)
+ # This empty case has to be kept for devices without any MAC address adjustments
+ ;;
+ dlink,dir-860l-b1)
+ lan_mac=$(mtd_get_mac_ascii factory lanmac)
+ wan_mac=$(mtd_get_mac_ascii factory wanmac)
+ label_mac=$(cat /sys/class/ieee80211/phy1/macaddress)
+ ;;
+ edimax,rg21s)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+ ;;
+ hiwifi,hc5962)
+ lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
+ label_mac=$lan_mac
+ [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ iodata,wn-ax1167gr|\
+ iodata,wn-gx300gr)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
+ ;;
+ iodata,wnpr2600g)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+ label_mac=$wan_mac
+ ;;
+ netgear,r6260|\
+ netgear,r6350|\
+ netgear,r6850)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+ ;;
+ xiaomi,mir3g)
+ lan_mac=$(mtd_get_mac_binary factory 0xe006)
+ ;;
+ xiaomi,mir3g-v2)
+ wan_mac=$(mtd_get_mac_binary factory 0xe006)
+ label_mac=$wan_mac
+ ;;
+ xiaomi,mir3p)
+ lan_mac=$(mtd_get_mac_binary factory 0xe006)
+ label_mac=$lan_mac
+ ;;
+ zbtlink,zbt-we1326)
+ wan_mac=$(mtd_get_mac_binary factory 0xe006)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ zbtlink,zbt-wg3526-16m|\
+ zbtlink,zbt-wg3526-32m)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ *)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches
similarity index 55%
rename from target/linux/ramips/base-files/etc/board.d/03_gpio_switches
rename to target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches
index 9acd78ea0b..d3bc85f827 100755
--- a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches
@@ -7,18 +7,6 @@ board_config_update
board=$(board_name)
case "$board" in
-dlink,dir-510l)
- ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0"
- ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1"
- ;;
-head-weblink,hdrm200)
- ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "0"
- ucidef_add_gpio_switch "io1" "I/O 1" "1"
- ucidef_add_gpio_switch "io2" "I/O 2" "2"
- ucidef_add_gpio_switch "io3" "I/O 3" "11"
- ucidef_add_gpio_switch "io4" "I/O 4" "14"
- ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "21" "1"
- ;;
mikrotik,rb750gr3)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17"
;;
@@ -35,10 +23,6 @@ ubiquiti,edgerouterx-sfp)
ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "499"
ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "500"
;;
-zbtlink,zbt-we826-e)
- ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "13"
- ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "14" "1"
- ;;
esac
board_config_flush
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
similarity index 91%
rename from target/linux/ramips/base-files/lib/upgrade/platform.sh
rename to target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index 03e994dfa4..f8aa0373a0 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -39,10 +39,6 @@ platform_do_upgrade() {
xiaomi,mir3p)
nand_do_upgrade "$1"
;;
- tplink,archer-c50-v4)
- MTD_ARGS="-t romfile"
- default_do_upgrade "$1"
- ;;
ubiquiti,edgerouterx|\
ubiquiti,edgerouterx-sfp)
platform_upgrade_ubnt_erx "$1"
diff --git a/target/linux/ramips/base-files/lib/upgrade/ubnt.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/ubnt.sh
similarity index 100%
rename from target/linux/ramips/base-files/lib/upgrade/ubnt.sh
rename to target/linux/ramips/mt7621/base-files/lib/upgrade/ubnt.sh
diff --git a/target/linux/ramips/base-files/sbin/fixup-mac-address b/target/linux/ramips/mt7621/base-files/sbin/fixup-mac-address
similarity index 100%
rename from target/linux/ramips/base-files/sbin/fixup-mac-address
rename to target/linux/ramips/mt7621/base-files/sbin/fixup-mac-address
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..f397da14a3
--- /dev/null
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
@@ -0,0 +1,138 @@
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+ ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+alfa-network,awusfree1)
+ set_wifi_led "$boardname:blue:wlan"
+ ;;
+cudy,wr1000)
+ ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
+ ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08"
+ ucidef_set_led_switch "lan2" "lan2" "$boardname:blue:lan2" "switch0" "0x04"
+ ;;
+glinet,gl-mt300n-v2)
+ set_wifi_led "$boardname:red:wlan"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x1"
+ ;;
+hilink,hlk-7628n|\
+skylab,skw92a)
+ set_wifi_led "$boardname:green:wlan"
+ ;;
+hiwifi,hc5661a|\
+hiwifi,hc5761a)
+ ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10"
+ ;;
+mediatek,linkit-smart-7688)
+ ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt"
+ ;;
+netgear,r6120)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
+ ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
+ ;;
+rakwireless,rak633)
+ set_wifi_led "$boardname:blue:wifi"
+ ;;
+tama,w06)
+ ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
+ ;;
+tplink,archer-c20-v4)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0"
+ ;;
+tplink,archer-c50-v3|\
+tplink,archer-c50-v4)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt"
+ ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt"
+ ;;
+tplink,tl-mr3020-v3)
+ set_wifi_led "$boardname:green:wlan"
+ ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
+ ;;
+tplink,tl-mr3420-v5|\
+tplink,tl-wr842n-v5)
+ ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ;;
+tplink,tl-wa801nd-v5)
+ ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
+ ;;
+tplink,tl-wr840n-v4)
+ ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ;;
+tplink,tl-wr841n-v13)
+ ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
+ ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2"
+ ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4"
+ ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8"
+ ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ;;
+tplink,tl-wr841n-v14)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ;;
+tplink,tl-wr902ac-v3)
+ ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10"
+ ;;
+unielec,u7628-01-16m)
+ ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2"
+ ucidef_set_led_switch "lan2" "lan2" "u7628-01:green:lan2" "switch0" "0x4"
+ ucidef_set_led_switch "lan3" "lan3" "u7628-01:green:lan3" "switch0" "0x8"
+ ucidef_set_led_switch "lan4" "lan4" "u7628-01:green:lan4" "switch0" "0x10"
+ ucidef_set_led_switch "wan" "wan" "u7628-01:green:wan" "switch0" "0x01"
+ set_wifi_led "u7628-01:green:wlan"
+ ;;
+wavlink,wl-wn570ha1)
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49"
+ ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84"
+ ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100"
+ set_wifi_led "$boardname:green:wifi"
+ ;;
+wavlink,wl-wn575a3)
+ ucidef_set_rssimon "wlan1" "200000" "1"
+ ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan1" "1" "49"
+ ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84"
+ ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100"
+ ;;
+zbtlink,zbt-we1226)
+ set_wifi_led "$boardname:green:wlan"
+ ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
+ ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02"
+ ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10"
+ ;;
+zyxel,keenetic-extra-ii)
+ set_wifi_led "$boardname:green:wifi"
+ ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..3bb5d31423
--- /dev/null
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -0,0 +1,191 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_interfaces()
+{
+ local board="$1"
+
+ case $board in
+ alfa-network,awusfree1|\
+ d-team,pbr-d1|\
+ tama,w06|\
+ tplink,tl-mr3020-v3|\
+ tplink,tl-wr802n-v4)
+ ucidef_set_interface_lan "eth0"
+ ;;
+ buffalo,wcr-1166ds)
+ ucidef_add_switch "switch0" \
+ "3:lan" "4:wan" "6 at eth0"
+ ;;
+ cudy,wr1000)
+ ucidef_add_switch "switch0" \
+ "2:lan:2" "3:lan:1" "4:wan" "6 at eth0"
+ ;;
+ duzun,dm06)
+ ucidef_add_switch "switch0" \
+ "1:lan" "0:wan" "6 at eth0"
+ ;;
+ glinet,gl-mt300n-v2)
+ ucidef_add_switch "switch0" \
+ "1:lan" "0:wan" "6 at eth0"
+ ;;
+ glinet,vixmini)
+ ucidef_add_switch "switch0" \
+ "0:lan" "6 at eth0"
+ ;;
+ hilink,hlk-7628n|\
+ hiwifi,hc5861b|\
+ skylab,skw92a|\
+ tplink,archer-c20-v4|\
+ tplink,archer-c50-v3|\
+ tplink,archer-c50-v4|\
+ tplink,tl-mr3420-v5|\
+ tplink,tl-wr840n-v4|\
+ tplink,tl-wr840n-v5|\
+ tplink,tl-wr841n-v13|\
+ tplink,tl-wr841n-v14|\
+ tplink,tl-wr842n-v5|\
+ unielec,u7628-01-16m|\
+ wrtnode,wrtnode2p|\
+ wrtnode,wrtnode2r|\
+ zyxel,keenetic-extra-ii)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6 at eth0"
+ ;;
+ hiwifi,hc5661a|\
+ hiwifi,hc5761a|\
+ mediatek,mt7628an-eval-board|\
+ mercury,mac1200r-v2|\
+ totolink,lr1200|\
+ wavlink,wl-wn570ha1|\
+ wavlink,wl-wn575a3|\
+ xiaomi,miwifi-nano)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6 at eth0"
+ ;;
+ iptime,a3)
+ ucidef_add_switch "switch0" \
+ "2:lan:2" "3:lan:1" "0:wan" "6 at eth0"
+ ;;
+ iptime,a604m)
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6 at eth0"
+ ;;
+ mediatek,linkit-smart-7688|\
+ onion,omega2p|\
+ onion,omega2|\
+ tplink,tl-wa801nd-v5|\
+ widora,neo-16m|\
+ widora,neo-32m)
+ ucidef_add_switch "switch0"
+ ucidef_add_switch_attr "switch0" "enable" "false"
+ ucidef_set_interface_lan "eth0"
+ ;;
+ netgear,r6120)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6 at eth0"
+ ;;
+ rakwireless,rak633)
+ ucidef_add_switch "switch0" \
+ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t at eth0"
+ ;;
+ tplink,tl-wr902ac-v3)
+ ucidef_add_switch "switch0" \
+ "4:lan" "6 at eth0"
+ ;;
+ vocore,vocore2|\
+ vocore,vocore2-lite)
+ ucidef_add_switch "switch0" \
+ "0:lan" "2:lan" "6t at eth0"
+ ;;
+ wiznet,wizfi630s)
+ ucidef_add_switch "switch0" \
+ "0:wan" "3:lan" "4:lan" "6 at eth0"
+ ;;
+ xiaomi,mir4a-100m)
+ ucidef_add_switch "switch0" \
+ "4:lan:1" "2:lan:2" "0:wan" "6 at eth0"
+ ;;
+ zbtlink,zbt-we1226)
+ ucidef_add_switch "switch0" \
+ "0:lan:2" "1:lan:1" "4:wan" "6 at eth0"
+ ;;
+ *)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+ esac
+}
+
+ramips_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
+
+ case $board in
+ buffalo,wcr-1166ds)
+ local index="$(find_mtd_index "board_data")"
+ wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
+ lan_mac=$wan_mac
+ ;;
+ cudy,wr1000)
+ wan_mac=$(mtd_get_mac_binary factory 0x2e)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ glinet,gl-mt300n-v2)
+ # This empty case has to be kept for devices without any MAC address adjustments
+ ;;
+ hilink,hlk-7628n)
+ lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ hiwifi,hc5661a|\
+ hiwifi,hc5761a|\
+ hiwifi,hc5861b)
+ lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
+ label_mac=$lan_mac
+ [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ iptime,a3|\
+ iptime,a604m)
+ wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40)
+ ;;
+ mediatek,linkit-smart-7688|\
+ onion,omega2|\
+ onion,omega2p)
+ wan_mac=$(mtd_get_mac_binary factory 0x4)
+ lan_mac=$(mtd_get_mac_binary factory 0x2e)
+ ;;
+ mercury,mac1200r-v2)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory_info 0xd)" 1)
+ ;;
+ skylab,skw92a|\
+ totolink,lr1200)
+ wan_mac=$(mtd_get_mac_binary factory 0x2e)
+ ;;
+ vocore,vocore2|\
+ vocore,vocore2-lite)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ *)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/mt76x8/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt76x8/base-files/lib/upgrade/platform.sh
new file mode 100755
index 0000000000..606a9f2bf6
--- /dev/null
+++ b/target/linux/ramips/mt76x8/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,24 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ tplink,archer-c50-v4)
+ MTD_ARGS="-t romfile"
+ default_do_upgrade "$1"
+ ;;
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
diff --git a/target/linux/ramips/rt288x/base-files/etc/board.d/01_leds b/target/linux/ramips/rt288x/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..a042ecfbda
--- /dev/null
+++ b/target/linux/ramips/rt288x/base-files/etc/board.d/01_leds
@@ -0,0 +1,34 @@
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+ ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+airlink101,ar670w|\
+airlink101,ar725w)
+ set_wifi_led "rt2800soc-phy0::radio"
+ ;;
+belkin,f5d8235-v1)
+ set_wifi_led "$boardname:blue:wireless"
+ ;;
+ralink,v11st-fe)
+ set_wifi_led "rt2800pci-phy0::radio"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/rt288x/base-files/etc/board.d/02_network b/target/linux/ramips/rt288x/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..20b6f5317f
--- /dev/null
+++ b/target/linux/ramips/rt288x/base-files/etc/board.d/02_network
@@ -0,0 +1,61 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_interfaces()
+{
+ local board="$1"
+
+ case $board in
+ airlink101,ar670w|\
+ airlink101,ar725w)
+ ucidef_add_switch "switch0" \
+ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t at eth0"
+ ;;
+ asus,rt-n15)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5 at eth0"
+ ;;
+ belkin,f5d8235-v1|\
+ buffalo,wzr-agl300nh|\
+ ralink,v11st-fe)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5 at eth0"
+ ;;
+ buffalo,wli-tx4-ag300n|\
+ dlink,dap-1522-a1)
+ ucidef_set_interface_lan "eth0"
+ ;;
+ *)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+ esac
+}
+
+ramips_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
+
+ case $board in
+ *)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/rt288x/base-files/lib/upgrade/platform.sh b/target/linux/ramips/rt288x/base-files/lib/upgrade/platform.sh
new file mode 100755
index 0000000000..786d57fc70
--- /dev/null
+++ b/target/linux/ramips/rt288x/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
diff --git a/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..ae813e85d6
--- /dev/null
+++ b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds
@@ -0,0 +1,109 @@
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+ ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+7links,px-4885-4m|\
+7links,px-4885-8m)
+ set_wifi_led "px-4885:orange:wifi"
+ ;;
+airlive,air3gii|\
+aximcom,mr-102n|\
+edimax,3g-6200nl|\
+netgear,wnce2001)
+ set_wifi_led "$boardname:green:wlan"
+ ;;
+alfa-network,w502u|\
+dlink,dir-300-b1|\
+dlink,dir-300-b7|\
+dlink,dir-320-b1|\
+dlink,dir-600-b1|\
+dlink,dir-610-a1|\
+dlink,dir-615-d|\
+dlink,dir-615-h1|\
+dlink,dir-620-a1|\
+engenius,esr-9753|\
+hilink,hlk-rm04|\
+nexx,wt1520-4m|\
+nexx,wt1520-8m|\
+skyline,sl-r7205|\
+tenda,w306r-v2|\
+zyxel,keenetic-start|\
+zyxel,keenetic|\
+zyxel,nbg-419n-v2)
+ set_wifi_led "rt2800pci-phy0::radio"
+ ;;
+allnet,all0256n-4m|\
+allnet,all0256n-8m)
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
+ ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
+ set_wifi_led "rt2800pci-phy0::radio"
+ ;;
+alphanetworks,asl26555-8m|\
+alphanetworks,asl26555-16m)
+ ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
+ set_wifi_led "asl26555:green:wlan"
+ ;;
+asiarf,awapn2403)
+ set_wifi_led "rt2800soc-phy0::radio"
+ ;;
+dlink,dcs-930l-b1)
+ ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps"
+ ;;
+dlink,dir-620-d1|\
+trendnet,tew-714tru)
+ set_wifi_led "$boardname:green:wifi"
+ ;;
+edimax,3g-6200n|\
+planex,mzk-w300nh2)
+ set_wifi_led "$boardname:amber:wlan"
+ ;;
+fon,fonera-20n)
+ set_wifi_led "$boardname:orange:wifi"
+ ;;
+hauppauge,broadway)
+ set_wifi_led "$boardname:red:wps_active"
+ ;;
+hootoo,ht-tm02)
+ ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0"
+ set_wifi_led "$boardname:blue:wlan"
+ ;;
+huawei,hg255d)
+ set_wifi_led "$boardname:green:wlan"
+ ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
+ ;;
+intenso,memory2move)
+ set_wifi_led "$boardname:blue:wifi"
+ ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0"
+ ;;
+omnima,miniembplug)
+ set_wifi_led "$boardname:red:wlan"
+ ;;
+vocore,vocore-8m|\
+vocore,vocore-16m)
+ ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
+ ;;
+zorlik,zl5900v2)
+ ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/rt305x/base-files/etc/board.d/02_network b/target/linux/ramips/rt305x/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..326bc8a3df
--- /dev/null
+++ b/target/linux/ramips/rt305x/base-files/etc/board.d/02_network
@@ -0,0 +1,228 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_rt3x5x_vlans()
+{
+ if [ ! -x /sbin/swconfig ]; then
+ # legacy default
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ return
+ fi
+ local wanports=""
+ local lanports=""
+ for port in 5 4 3 2 1 0; do
+ if [ "$(swconfig dev rt305x port $port get disable)" = "1" ]; then
+ continue
+ fi
+ if [ "$(swconfig dev rt305x port $port get lan)" = "0" ]; then
+ wanports="$port:wan $wanports"
+ else
+ lanports="$port:lan $lanports"
+ fi
+ done
+ ucidef_add_switch "rt305x" $lanports $wanports "6t at eth0"
+}
+
+ramips_setup_interfaces()
+{
+ local board="$1"
+
+ case $board in
+ accton,wr6202|\
+ alfa-network,w502u|\
+ netcore,nw718|\
+ petatel,psr-680w|\
+ skyline,sl-r7205|\
+ upvel,ur-336un)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+ allnet,all0256n-4m|\
+ allnet,all0256n-8m|\
+ allnet,all5002|\
+ allnet,all5003|\
+ dlink,dcs-930l-b1|\
+ dlink,dcs-930|\
+ hame,mpr-a2|\
+ hauppauge,broadway|\
+ hootoo,ht-tm02|\
+ intenso,memory2move|\
+ netgear,wnce2001|\
+ tenda,3g150b|\
+ tenda,3g300m|\
+ tenda,w150m|\
+ unbranded,a5-v11|\
+ wansview,ncs601w|\
+ zorlik,zl5900v2)
+ ucidef_add_switch "switch0"
+ ucidef_add_switch_attr "switch0" "enable" "false"
+ ucidef_set_interface_lan "eth0"
+ ;;
+ alphanetworks,asl26555-8m|\
+ alphanetworks,asl26555-16m)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "6t at eth0"
+ ;;
+ argus,atp-52b|\
+ asiarf,awm002-evb-4m|\
+ asiarf,awm002-evb-8m|\
+ jcg,jhr-n805r|\
+ jcg,jhr-n825r|\
+ jcg,jhr-n926r|\
+ planex,mzk-wdpr|\
+ upvel,ur-326n4g)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6 at eth0"
+ ;;
+ asiarf,awapn2403)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:wan" "6 at eth0"
+ ;;
+ asus,wl-330n|\
+ easyacc,wizard-8800)
+ ucidef_set_interface_lan "eth0.1"
+ ;;
+ aximcom,mr-102n)
+ ucidef_set_interface_lan "eth0.2"
+ ;;
+ belkin,f5d8235-v2|\
+ trendnet,tew-714tru)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5 at eth0"
+ ;;
+ buffalo,whr-g300n|\
+ dlink,dir-300-b7|\
+ dlink,dir-320-b1|\
+ dlink,dir-610-a1|\
+ edimax,3g-6200n|\
+ hilink,hlk-rm04|\
+ nixcore,x1-16m|\
+ nixcore,x1-8m|\
+ planex,mzk-w300nh2|\
+ zyxel,keenetic)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6 at eth0"
+ ;;
+ dlink,dir-615-h1)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6 at eth0"
+ ;;
+ huawei,d105)
+ ucidef_set_interface_lan "eth0"
+ ;;
+ huawei,hg255d)
+ ucidef_add_switch "switch0" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6 at eth0"
+ ;;
+ nexx,wt1520-4m|\
+ nexx,wt1520-8m)
+ ucidef_add_switch "switch0" \
+ "0:lan" "4:wan" "6 at eth0"
+ ;;
+ planex,mzk-dp150n|\
+ vocore,vocore-8m|\
+ vocore,vocore-16m)
+ ucidef_add_switch "switch0" \
+ "0:lan" "4:lan" "6t at eth0"
+ ;;
+ sitecom,wl-351)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5 at eth0"
+ ;;
+ sparklan,wcr-150gn)
+ ucidef_add_switch "switch0" \
+ "0:lan" "6t at eth0"
+ ;;
+ trendnet,tew-638apb-v2)
+ ucidef_add_switch "switch0" \
+ "4:lan" "6 at eth0"
+ ;;
+ wiznet,wizfi630a)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:wan" "6 at eth0"
+ ;;
+ zyxel,keenetic-start)
+ ucidef_add_switch "switch0" \
+ "0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6 at eth0"
+ ;;
+ *)
+ RT3X5X=$(grep -E "(RT3.5|RT5350)" /proc/cpuinfo)
+ if [ -n "${RT3X5X}" ]; then
+ ramips_setup_rt3x5x_vlans
+ else
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ fi
+ ;;
+ esac
+}
+
+ramips_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
+
+ case $board in
+ 8devices,carambola|\
+ alfa-network,w502u|\
+ arcwireless,freestation5|\
+ netgear,wnce2001)
+ wan_mac=$(mtd_get_mac_binary factory 0x2e)
+ ;;
+ buffalo,whr-g300n|\
+ zyxel,keenetic-start)
+ # This empty case has to be kept for devices without any MAC address adjustments
+ ;;
+ dlink,dir-300-b7|\
+ dlink,dir-320-b1|\
+ dlink,dir-620-a1|\
+ engenius,esr-9753|\
+ hame,mpr-a1|\
+ hauppauge,broadway|\
+ huawei,d105|\
+ hilink,hlk-rm04|\
+ nexaira,bc2|\
+ petatel,psr-680w|\
+ skyline,sl-r7205)
+ lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
+ wan_mac=$(macaddr_add "$lan_mac" 1)
+ ;;
+ dlink,dir-615-d|\
+ dlink,dir-615-h1)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
+ ;;
+ poray,m3|\
+ poray,m4-4m|\
+ poray,m4-8m|\
+ poray,x5|\
+ poray,x8)
+ lan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" -2)
+ ;;
+ sparklan,wcr-150gn|\
+ wiznet,wizfi630a)
+ wan_mac=$(mtd_get_mac_binary factory 0x28)
+ ;;
+ tenda,w306r-v2)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 5)
+ ;;
+ *)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/base-files/lib/preinit/04_handle_checksumming b/target/linux/ramips/rt305x/base-files/lib/preinit/04_handle_checksumming
similarity index 65%
rename from target/linux/ramips/base-files/lib/preinit/04_handle_checksumming
rename to target/linux/ramips/rt305x/base-files/lib/preinit/04_handle_checksumming
index 8f741faf9d..9a2361d057 100644
--- a/target/linux/ramips/base-files/lib/preinit/04_handle_checksumming
+++ b/target/linux/ramips/rt305x/base-files/lib/preinit/04_handle_checksumming
@@ -35,19 +35,6 @@ do_checksumming_disable() {
echo "Checksum is already zero, nothing to do."
fi
;;
- asus,rt-n56u)
- echo "Board is ASUS RT-N56U, replacing uImage header..."
- local firmware_mtd=$(find_mtd_part firmware)
- local rootfs_mtd=$(find_mtd_part rootfs)
- local rootfs_data_mtd=$(find_mtd_part rootfs_data)
- local rootfs_len=$(grep \"rootfs\" /proc/mtd | awk -F' ' '{print "0x"$2}')
- local rootfs_data_len=$(grep \"rootfs_data\" /proc/mtd | awk -F' ' '{print "0x"$2}')
- local offset=$(echo "$rootfs_len $rootfs_data_len 0x40" | awk -F' ' '{printf "%i",$1-$2-$3}')
- local signature=$(dd if=$rootfs_mtd skip=$offset bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')
- if [ "$signature" = "27051956" ]; then
- dd conv=notrunc if=$rootfs_mtd skip=$offset of=$firmware_mtd bs=1 count=64 2>/dev/null
- fi
- ;;
esac
return 0
diff --git a/target/linux/ramips/rt305x/base-files/lib/upgrade/platform.sh b/target/linux/ramips/rt305x/base-files/lib/upgrade/platform.sh
new file mode 100755
index 0000000000..786d57fc70
--- /dev/null
+++ b/target/linux/ramips/rt305x/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
diff --git a/target/linux/ramips/rt3883/base-files/etc/board.d/01_leds b/target/linux/ramips/rt3883/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..8502c8f417
--- /dev/null
+++ b/target/linux/ramips/rt3883/base-files/etc/board.d/01_leds
@@ -0,0 +1,35 @@
+#!/bin/sh
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+set_wifi_led() {
+ ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
+}
+
+
+board=$(board_name)
+boardname="${board##*,}"
+
+board_config_update
+
+led_wlan="$(get_dt_led wlan)"
+[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt"
+
+case $board in
+belkin,f9k1109v1)
+ set_usb_led "$boardname:green:usb1"
+ ucidef_set_led_netdev "lan" "lan" "$boardname:blue:wps" "eth0"
+ ;;
+edimax,br-6475nd)
+ set_wifi_led "$boardname:amber:wlan"
+ ;;
+omnima,hpm)
+ ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
+ set_wifi_led "$boardname:green:wifi"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/rt3883/base-files/etc/board.d/02_network b/target/linux/ramips/rt3883/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..519d46aae6
--- /dev/null
+++ b/target/linux/ramips/rt3883/base-files/etc/board.d/02_network
@@ -0,0 +1,100 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ramips_setup_interfaces()
+{
+ local board="$1"
+
+ case $board in
+ asus,rt-n56u)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8 at eth0"
+ ;;
+ belkin,f9k1109v1)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5 at eth0"
+ ;;
+ dlink,dir-645)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6 at eth0"
+ ;;
+ edimax,br-6475nd)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9 at eth0"
+ ;;
+ loewe,wmdr-143n|\
+ omnima,hpm)
+ ucidef_set_interface_lan "eth0"
+ ;;
+ samsung,cy-swr1100)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9 at eth0"
+ ;;
+ sitecom,wlr-6000|\
+ trendnet,tew-691gr|\
+ trendnet,tew-692gr)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0 at eth0"
+ ;;
+ *)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+ esac
+}
+
+ramips_setup_macs()
+{
+ local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
+
+ case $board in
+ asus,rt-n56u)
+ lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
+ wan_mac=$(mtd_get_mac_binary factory 0x8004)
+ ;;
+ belkin,f9k1109v1)
+ wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC)
+ lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC)
+ label_mac=$wan_mac
+ ;;
+ dlink,dir-645)
+ lan_mac=$(mtd_get_mac_ascii nvram lanmac)
+ wan_mac=$(mtd_get_mac_ascii nvram wanmac)
+ ;;
+ edimax,br-6475nd)
+ wan_mac=$(mtd_get_mac_binary devdata 0x7)
+ ;;
+ samsung,cy-swr1100)
+ lan_mac=$(mtd_get_mac_ascii factory lanmac)
+ ;;
+ sitecom,wlr-6000)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x8004)" 2)
+ ;;
+ trendnet,tew-691gr)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 3)
+ ;;
+ trendnet,tew-692gr)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
+ ;;
+ *)
+ wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+ ;;
+ esac
+
+ [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+ [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+board_config_flush
+
+exit 0
diff --git a/target/linux/ramips/rt3883/base-files/lib/preinit/04_handle_checksumming b/target/linux/ramips/rt3883/base-files/lib/preinit/04_handle_checksumming
new file mode 100644
index 0000000000..e2aef5f1f2
--- /dev/null
+++ b/target/linux/ramips/rt3883/base-files/lib/preinit/04_handle_checksumming
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+# Netgear WNCE2001 has does a checksum check on boot and goes into recovery
+# tftp mode when the check fails. Initializing the JFFS2 partition triggers
+# this, so we make sure to zero checksum and size to be checksummed before
+# that happens, so this needs to run very early during boot.
+
+do_checksumming_disable() {
+ . /lib/functions.sh
+
+ local board=$(board_name)
+
+ case "$board" in
+ asus,rt-n56u)
+ echo "Board is ASUS RT-N56U, replacing uImage header..."
+ local firmware_mtd=$(find_mtd_part firmware)
+ local rootfs_mtd=$(find_mtd_part rootfs)
+ local rootfs_data_mtd=$(find_mtd_part rootfs_data)
+ local rootfs_len=$(grep \"rootfs\" /proc/mtd | awk -F' ' '{print "0x"$2}')
+ local rootfs_data_len=$(grep \"rootfs_data\" /proc/mtd | awk -F' ' '{print "0x"$2}')
+ local offset=$(echo "$rootfs_len $rootfs_data_len 0x40" | awk -F' ' '{printf "%i",$1-$2-$3}')
+ local signature=$(dd if=$rootfs_mtd skip=$offset bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')
+ if [ "$signature" = "27051956" ]; then
+ dd conv=notrunc if=$rootfs_mtd skip=$offset of=$firmware_mtd bs=1 count=64 2>/dev/null
+ fi
+ ;;
+ esac
+
+ return 0
+}
+
+boot_hook_add preinit_main do_checksumming_disable
diff --git a/target/linux/ramips/rt3883/base-files/lib/upgrade/platform.sh b/target/linux/ramips/rt3883/base-files/lib/upgrade/platform.sh
new file mode 100755
index 0000000000..786d57fc70
--- /dev/null
+++ b/target/linux/ramips/rt3883/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+ return 0
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
--
2.20.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list