[OpenWrt-Devel] [PATCH] ipq40xx: add label MAC address for Netgear EX6150v2

[David Bauer]

Hello Adrian,

On 10/7/19 7:38 PM, Adrian Schmutzler wrote:
> The device bears two MAC addresses ("MAC 1" and "MAC 2") that
> correspond to phy0 and phy1.
> 
> The ethernet MAC address (gmac0) is the same as phy0.
> As this one is accessible via local-mac-address in gmac0, the
> latter is used for label-mac-device.

You can define the property in the common DTSI for the EX6100v2 / EX6150v2,
as they are identical.

Best wishes
David

> 
> (Although this is a one-port, gmac1 also has a local-mac-address
> assigned. This has the same vendor part as the other addresses,
> but completely different data for the device part.)
> 
> Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
> ---
>  .../files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts    | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
> index f1c44c1ae8..9724894e7f 100644
> --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
> +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
> @@ -22,6 +22,10 @@
>  / {
>  	model = "Netgear EX6150v2";
>  	compatible = "netgear,ex6150v2";
> +
> +	aliases {
> +		label-mac-device = &gmac0;
> +	};
>  };
>  
>  &wifi0 {
> 

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel