[OpenWrt-Devel] [PATCH] ipq40xx: add label MAC address for Netgear EX6150v2

[Adrian Schmutzler]

The device bears two MAC addresses ("MAC 1" and "MAC 2") that
correspond to phy0 and phy1.

The ethernet MAC address (gmac0) is the same as phy0.
As this one is accessible via local-mac-address in gmac0, the
latter is used for label-mac-device.

(Although this is a one-port, gmac1 also has a local-mac-address
assigned. This has the same vendor part as the other addresses,
but completely different data for the device part.)

Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
 .../files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts    | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
index f1c44c1ae8..9724894e7f 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
+++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
@@ -22,6 +22,10 @@
 / {
 	model = "Netgear EX6150v2";
 	compatible = "netgear,ex6150v2";
+
+	aliases {
+		label-mac-device = &gmac0;
+	};
 };
 
 &wifi0 {
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel