[OpenWrt-Devel] [PATCH] ramips: add factory image for NETGEAR R6220

[Enrico Mioso]

VERY apreciated! Thanks to all!!


On Tue, 27 Aug 2019, David Bauer wrote:

> Date: Tue, 27 Aug 2019 23:57:11
> From: David Bauer <mail at david-bauer.net>
> To: openwrt-devel at lists.openwrt.org
> Cc: dev at andreas-ziegler.de
> Subject: [OpenWrt-Devel] [PATCH] ramips: add factory image for NETGEAR R6220
> 
> This adds an easy-installation factory image for the NETGEAR R6220
> router. The factory image can either be flashed via the vendor Web-UI or
> the bootloader using nmrpflash.
>
> Tested with NETGEAR V1.1.0.86 firmware.
>
> Signed-off-by: David Bauer <mail at david-bauer.net>
> ---
> target/linux/ramips/image/mt7621.mk | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
> index 5dc8efe7c5..a00e6280c7 100644
> --- a/target/linux/ramips/image/mt7621.mk
> +++ b/target/linux/ramips/image/mt7621.mk
> @@ -397,7 +397,12 @@ define Device/netgear_r6220
>   KERNEL_SIZE := 4096k
>   IMAGE_SIZE := 28672k
>   UBINIZE_OPTS := -E 5
> -  IMAGES += kernel.bin rootfs.bin
> +  SERCOMM_HWID := AYA
> +  SERCOMM_HWVER := A001
> +  SERCOMM_SWVER := 0x0086
> +  IMAGES += factory.img kernel.bin rootfs.bin
> +  IMAGE/factory.img := pad-extra 2048k | append-kernel | pad-to 6144k | append-ubi | \
> +	pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | zip R6220.bin | sercom-seal
>   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
>   IMAGE/kernel.bin := append-kernel
>   IMAGE/rootfs.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
> -- 
> 2.23.0
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel