[OpenWrt-Devel] [PATCH] ramips: add factory image for NETGEAR R6220

[David Bauer]

This adds an easy-installation factory image for the NETGEAR R6220
router. The factory image can either be flashed via the vendor Web-UI or
the bootloader using nmrpflash.

Tested with NETGEAR V1.1.0.86 firmware.

Signed-off-by: David Bauer <mail at david-bauer.net>
---
 target/linux/ramips/image/mt7621.mk | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 5dc8efe7c5..a00e6280c7 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -397,7 +397,12 @@ define Device/netgear_r6220
   KERNEL_SIZE := 4096k
   IMAGE_SIZE := 28672k
   UBINIZE_OPTS := -E 5
-  IMAGES += kernel.bin rootfs.bin
+  SERCOMM_HWID := AYA
+  SERCOMM_HWVER := A001
+  SERCOMM_SWVER := 0x0086
+  IMAGES += factory.img kernel.bin rootfs.bin
+  IMAGE/factory.img := pad-extra 2048k | append-kernel | pad-to 6144k | append-ubi | \
+	pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | zip R6220.bin | sercom-seal
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
   IMAGE/kernel.bin := append-kernel
   IMAGE/rootfs.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
-- 
2.23.0


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel