[OpenWrt-Devel] [PATCH 6/7] uboot-sunxi: Update to version 2018.11
Hauke Mehrtens
hauke at hauke-m.de
Thu Dec 27 06:08:41 EST 2018
This updates the uboot for the sunxi target to version 2018.11
The removed patches are applied upstream and not needed any more.
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
package/boot/uboot-sunxi/Makefile | 4 +-
.../003-add-theobroma-a31-pangolin.patch | 10 +-
.../patches/062-A20-improve-gmac-upload.patch | 4 +-
.../100-sun6i-alternate-on-UART2.patch | 2 +-
.../101-sun6i-support-console-on-UART2.patch | 4 +-
...2-sunxi-make_CONS_INDEX-configurable.patch | 2 +-
...-environment-for-dtc-binary-location.patch | 2 +-
.../patches/210-sunxi-deactivate-binman.patch | 4 +-
.../patches/221-compatible-old-dtc.patch | 2 +-
...Sync-OTG-and-HCI-nodes-from-Linux-DT.patch | 63 -----
...0-sunxi-Add-support-for-Orange-Pi-R1.patch | 179 --------------
.../400-ARM-dts-orange-pi-zero-plus.patch | 222 ------------------
12 files changed, 17 insertions(+), 481 deletions(-)
delete mode 100644 package/boot/uboot-sunxi/patches/310-sunxi-h3-Sync-OTG-and-HCI-nodes-from-Linux-DT.patch
delete mode 100644 package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch
delete mode 100644 package/boot/uboot-sunxi/patches/400-ARM-dts-orange-pi-zero-plus.patch
diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile
index 1728cc2f1e..59aa4f0277 100644
--- a/package/boot/uboot-sunxi/Makefile
+++ b/package/boot/uboot-sunxi/Makefile
@@ -9,9 +9,9 @@
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
-PKG_VERSION:=2018.05
+PKG_VERSION:=2018.11
-PKG_HASH:=4da13c2a6139a78cc08608f21fd4741db27eda336cfad7ab8264fda923b9c048
+PKG_HASH:=737c93f2ea03fec669e840dbee32bcf6238e6924ff5f20e4f1c472ee24e5d37e
PKG_MAINTAINER:=Zoltan HERPAI <wigyori at uid0.hu>
diff --git a/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch b/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch
index 6501cca6d2..93ded58c71 100644
--- a/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch
+++ b/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch
@@ -1,6 +1,6 @@
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
-@@ -290,6 +290,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
+@@ -306,6 +306,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-m9.dtb \
sun6i-a31-mele-a1000g-quad.dtb \
sun6i-a31-mixtile-loftq.dtb \
@@ -10,8 +10,8 @@
sun6i-a31s-inet-q972.dtb \
--- a/arch/arm/dts/sun6i-a31.dtsi
+++ b/arch/arm/dts/sun6i-a31.dtsi
-@@ -679,6 +679,13 @@
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+@@ -641,6 +641,13 @@
+ function = "lcd0";
};
+ i2c3_pins_a: i2c3 at 0 {
@@ -22,7 +22,7 @@
+ };
+
mmc0_pins_a: mmc0 at 0 {
- allwinner,pins = "PF0", "PF1", "PF2",
+ pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
--- /dev/null
+++ b/arch/arm/dts/sun6i-a31-pangolin.dts
@@ -360,7 +360,7 @@
+CONFIG_SUNXI_SPI=y
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
-@@ -836,6 +836,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
+@@ -872,6 +872,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
Set the SCL pin for the LCD i2c interface. This takes a string in the
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
diff --git a/package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch b/package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch
index 6dbcb10719..1759ef1c37 100644
--- a/package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch
+++ b/package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch
@@ -2,9 +2,9 @@
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
-@@ -22,6 +22,7 @@ CONFIG_DFU_RAM=y
- CONFIG_ETH_DESIGNWARE=y
+@@ -25,6 +25,7 @@ CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
+ CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
+CONFIG_GMAC_TX_DELAY=1
CONFIG_AXP_ALDO3_VOLT=2800
diff --git a/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch b/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch
index b3d9ba0409..8bab220518 100644
--- a/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch
+++ b/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch
@@ -6,7 +6,7 @@ Subject: sun6i: define alternate-function for UART2 on GPG
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
-@@ -185,6 +185,7 @@ enum sunxi_gpio_number {
+@@ -186,6 +186,7 @@ enum sunxi_gpio_number {
#define SUN6I_GPG_SDC1 2
#define SUN8I_GPG_SDC1 2
#define SUN6I_GPG_TWI3 2
diff --git a/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch b/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch
index e6ff8ce28c..b922690845 100644
--- a/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch
+++ b/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch
@@ -6,7 +6,7 @@ Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
-@@ -123,6 +123,10 @@ static int gpio_init(void)
+@@ -127,6 +127,10 @@ static int gpio_init(void)
sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
@@ -19,7 +19,7 @@ Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
-@@ -256,6 +256,8 @@ extern int soft_i2c_gpio_scl;
+@@ -258,6 +258,8 @@ extern int soft_i2c_gpio_scl;
#endif
#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
#define OF_STDOUT_PATH "/soc at 01c00000/serial at 01c28400:115200"
diff --git a/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch b/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch
index 083933e062..a3a0156668 100644
--- a/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch
+++ b/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch
@@ -6,7 +6,7 @@ Subject: ARM: sunxi: Make CONS_INDEX configurable
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
-@@ -500,6 +500,14 @@ config SYS_BOARD
+@@ -535,6 +535,14 @@ config SYS_BOARD
config SYS_SOC
default "sunxi"
diff --git a/package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch b/package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch
index 2c63ad322e..12f47259c3 100644
--- a/package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch
+++ b/package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch
@@ -17,7 +17,7 @@ Cc: Simon Glass <sjg at chromium.org>
--- a/tools/fit_image.c
+++ b/tools/fit_image.c
-@@ -649,9 +649,14 @@ static int fit_handle_file(struct image_
+@@ -656,9 +656,14 @@ static int fit_handle_file(struct image_
}
*cmd = '\0';
} else if (params->datafile) {
diff --git a/package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch b/package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch
index 24b8634110..fe1821d9f8 100644
--- a/package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch
+++ b/package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch
@@ -12,7 +12,7 @@ old way of generating images.
--- a/Makefile
+++ b/Makefile
-@@ -1215,8 +1215,10 @@ endif
+@@ -1255,8 +1255,10 @@ endif
ifneq ($(CONFIG_ARCH_SUNXI),)
ifeq ($(CONFIG_ARM64),)
@@ -27,7 +27,7 @@ old way of generating images.
$(call if_changed,cat)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -711,7 +711,6 @@ config ARCH_SOCFPGA
+@@ -820,7 +820,6 @@ config ARCH_SOCFPGA
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
diff --git a/package/boot/uboot-sunxi/patches/221-compatible-old-dtc.patch b/package/boot/uboot-sunxi/patches/221-compatible-old-dtc.patch
index 947a1ab055..4056d98008 100644
--- a/package/boot/uboot-sunxi/patches/221-compatible-old-dtc.patch
+++ b/package/boot/uboot-sunxi/patches/221-compatible-old-dtc.patch
@@ -7,7 +7,7 @@ dtc from kernel 4.9.
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
-@@ -172,6 +172,11 @@ ld-version = $(shell $(LD) --version | $
+@@ -173,6 +173,11 @@ ld-version = $(shell $(LD) --version | $
# Usage: $(call ld-ifversion, -ge, 22252, y)
ld-ifversion = $(shell [ $(ld-version) $(1) $(2) ] && echo $(3) || echo $(4))
diff --git a/package/boot/uboot-sunxi/patches/310-sunxi-h3-Sync-OTG-and-HCI-nodes-from-Linux-DT.patch b/package/boot/uboot-sunxi/patches/310-sunxi-h3-Sync-OTG-and-HCI-nodes-from-Linux-DT.patch
deleted file mode 100644
index 97aad78796..0000000000
--- a/package/boot/uboot-sunxi/patches/310-sunxi-h3-Sync-OTG-and-HCI-nodes-from-Linux-DT.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 96c04aab58e351fa9ed7e95783018d6dbf60768f Mon Sep 17 00:00:00 2001
-From: Jun Nie <jun.nie at linaro.org>
-Date: Mon, 7 May 2018 13:03:40 +0530
-Subject: sunxi: h3: Sync OTG and HCI nodes from Linux DT
-
-Allwinner H3 have a dual-routed USB PHY0 -- routed to either OHCI/EHCI
-or MUSB controller.
-
-Signed-off-by: Jun Nie <jun.nie at linaro.org>
-Reviewed-by: Jagan Teki <jagan at openedev.com>
-Acked-by: Jun Nie <jun.nie at linaro.org>
----
- arch/arm/dts/sun8i-h3.dtsi | 32 ++++++++++++++++++++++++++++++++
- 1 file changed, 32 insertions(+)
-
---- a/arch/arm/dts/sun8i-h3.dtsi
-+++ b/arch/arm/dts/sun8i-h3.dtsi
-@@ -219,6 +219,19 @@
- #size-cells = <0>;
- };
-
-+ usb_otg: usb at 1c19000 {
-+ compatible = "allwinner,sun8i-h3-musb";
-+ reg = <0x01c19000 0x400>;
-+ clocks = <&ccu CLK_BUS_OTG>;
-+ resets = <&ccu RST_BUS_OTG>;
-+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "mc";
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ extcon = <&usbphy 0>;
-+ status = "disabled";
-+ };
-+
- usbphy: phy at 01c19400 {
- compatible = "allwinner,sun8i-h3-usb-phy";
- reg = <0x01c19400 0x2c>,
-@@ -251,6 +264,25 @@
- #phy-cells = <1>;
- };
-
-+ ehci0: usb at 1c1a000 {
-+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
-+ reg = <0x01c1a000 0x100>;
-+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
-+ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
-+ status = "disabled";
-+ };
-+
-+ ohci0: usb at 1c1a400 {
-+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
-+ reg = <0x01c1a400 0x100>;
-+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
-+ <&ccu CLK_USB_OHCI0>;
-+ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
-+ status = "disabled";
-+ };
-+
- ehci1: usb at 01c1b000 {
- compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
- reg = <0x01c1b000 0x100>;
diff --git a/package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch b/package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch
deleted file mode 100644
index 97c4769468..0000000000
--- a/package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch
+++ /dev/null
@@ -1,179 +0,0 @@
-From fd3736abbe57a819312c8df96d14ec396b074581 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke at hauke-m.de>
-Date: Tue, 26 Sep 2017 22:16:59 +0200
-Subject: sun8i: h2: Add initial Orange Pi R1
-
-Orange Pi R1 is an open-source single-board computer using the
-Allwinner H2+ SOC.
-
-H2+ Orange Pi R1 has
- - Quad-core Cortex-A7
- - 256MB DDR3
- - micrSD slot
- - 128MBit SPI Nor flash
- - Debug TTL UART
- - 100MBit/s Ethernet (H2+)
- - 100MBit/s Ethernet (RTL8152B)
- - Wifi (RTL8189ETV)
- - USB 2.0 OTG + power supply
-This board is very similar to the Orange Pi Zero.
-
-The device tree file is copied from the Linux kernel 4.18.
-
-Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
----
- arch/arm/dts/Makefile | 1 +
- arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 101 +++++++++++++++++++++++++++++
- board/sunxi/MAINTAINERS | 5 ++
- configs/orangepi_r1_defconfig | 16 +++++
- 4 files changed, 123 insertions(+)
- create mode 100644 arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
- create mode 100644 configs/orangepi_r1_defconfig
-
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -350,6 +350,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
- sun8i-a83t-cubietruck-plus.dtb \
- sun8i-a83t-tbs-a711.dts
- dtb-$(CONFIG_MACH_SUN8I_H3) += \
-+ sun8i-h2-plus-orangepi-r1.dtb \
- sun8i-h2-plus-orangepi-zero.dtb \
- sun8i-h3-bananapi-m2-plus.dtb \
- sun8i-h3-libretech-all-h3-cc.dtb \
---- /dev/null
-+++ b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
-@@ -0,0 +1,101 @@
-+/*
-+ * Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.xyz>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/* Orange Pi R1 is based on Orange Pi Zero design */
-+#include "sun8i-h2-plus-orangepi-zero.dts"
-+
-+/ {
-+ model = "Xunlong Orange Pi R1";
-+ compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
-+
-+ /delete-node/ reg_vcc_wifi;
-+
-+ /*
-+ * Ths pin of this regulator is the same with the Wi-Fi extra
-+ * regulator on the original Zero. However it's used for USB
-+ * Ethernet rather than the Wi-Fi now.
-+ */
-+ reg_vcc_usb_eth: reg-vcc-usb-ethernet {
-+ compatible = "regulator-fixed";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-usb-ethernet";
-+ enable-active-high;
-+ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ aliases {
-+ ethernet1 = &rtl8189etv;
-+ };
-+};
-+
-+/*
-+&spi0 {
-+ status = "okay";
-+
-+ flash at 0 {
-+ compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
-+ };
-+};
-+*/
-+
-+&ohci1 {
-+ /*
-+ * RTL8152B USB-Ethernet adapter is connected to USB1,
-+ * and it's a USB 2.0 device. So the OHCI1 controller
-+ * can be left disabled.
-+ */
-+ status = "disabled";
-+};
-+
-+&mmc1 {
-+ vmmc-supply = <®_vcc3v3>;
-+ vqmmc-supply = <®_vcc3v3>;
-+
-+ rtl8189etv: sdio_wifi at 1 {
-+ reg = <1>;
-+ };
-+};
-+
-+&usbphy {
-+ usb1_vbus-supply = <®_vcc_usb_eth>;
-+};
---- a/board/sunxi/MAINTAINERS
-+++ b/board/sunxi/MAINTAINERS
-@@ -342,6 +342,11 @@ M: Jagan Teki <jagan at amarulasolutions.co
- S: Maintained
- F: configs/orangepi_prime_defconfig
-
-+ORANGEPI R1 BOARD
-+M: Hauke Mehrtens <hauke at hauke-m.de>
-+S: Maintained
-+F: configs/orangepi_r1_defconfig
-+
- PINE64 BOARDS
- M: Andre Przywara <andre.przywara at arm.com>
- S: Maintained
---- /dev/null
-+++ b/configs/orangepi_r1_defconfig
-@@ -0,0 +1,16 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN8I_H3=y
-+CONFIG_DRAM_CLK=624
-+CONFIG_DRAM_ZQ=3881979
-+CONFIG_DRAM_ODT_EN=y
-+# CONFIG_VIDEO_DE2 is not set
-+CONFIG_SPL_SPI_SUNXI=y
-+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1"
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_CONSOLE_MUX=y
-+# CONFIG_CMD_FLASH is not set
-+CONFIG_SUN8I_EMAC=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/package/boot/uboot-sunxi/patches/400-ARM-dts-orange-pi-zero-plus.patch b/package/boot/uboot-sunxi/patches/400-ARM-dts-orange-pi-zero-plus.patch
deleted file mode 100644
index e1e16d6f34..0000000000
--- a/package/boot/uboot-sunxi/patches/400-ARM-dts-orange-pi-zero-plus.patch
+++ /dev/null
@@ -1,222 +0,0 @@
-From fd576a3c594ee2356b50a0738403e5cef094935a Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke at hauke-m.de>
-Date: Sat, 9 Jun 2018 15:16:42 +0200
-Subject: sun50i: h5: Add initial Orange Pi Zero Plus support
-
-Orange Pi Zero Plus is an open-source single-board computer
-using the Allwinner H5 SOC.
-
-H5 Orangepi Zero Plus has
- - Quad-core Cortex-A53
- - 512MB DDR3
- - micrSD slot
- - 16MBit SPI Nor flash
- - Debug TTL UART
- - 1GBit/s Ethernet (RTL8211E)
- - Wifi (RTL8189FTV)
- - USB 2.0 Host
- - USB 2.0 OTG + power supply
-
-The device tree file is copied from the Linux kernel 4.18.
-
-Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
----
- arch/arm/dts/Makefile | 1 +
- arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts | 145 ++++++++++++++++++++++++++
- board/sunxi/MAINTAINERS | 5 +
- configs/orangepi_zero_plus_defconfig | 16 +++
- 4 files changed, 167 insertions(+)
- create mode 100644 arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
- create mode 100644 configs/orangepi_zero_plus_defconfig
-
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -372,6 +372,7 @@ dtb-$(CONFIG_MACH_SUN8I_V3S) += \
- dtb-$(CONFIG_MACH_SUN50I_H5) += \
- sun50i-h5-nanopi-neo2.dtb \
- sun50i-h5-nanopi-neo-plus2.dtb \
-+ sun50i-h5-orangepi-zero-plus.dtb \
- sun50i-h5-orangepi-pc2.dtb \
- sun50i-h5-orangepi-prime.dtb \
- sun50i-h5-orangepi-zero-plus2.dtb
---- /dev/null
-+++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
-@@ -0,0 +1,145 @@
-+/*
-+ * Copyright (C) 2016 ARM Ltd.
-+ * Copyright (C) 2018 Hauke Mehrtens <hauke at hauke-m.de>
-+ *
-+ * SPDX-License-Identifier: (GPL-2.0+ OR X11)
-+ */
-+
-+/dts-v1/;
-+#include "sun50i-h5.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+ model = "Xunlong Orange Pi Zero Plus";
-+ compatible = "xunlong,orangepi-zero-plus", "allwinner,sun50i-h5";
-+
-+ reg_vcc3v3: vcc3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ aliases {
-+ ethernet0 = &emac;
-+ ethernet1 = &rtl8189ftv;
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ pwr {
-+ label = "orangepi:green:pwr";
-+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
-+ default-state = "on";
-+ };
-+
-+ status {
-+ label = "orangepi:red:status";
-+ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
-+ };
-+ };
-+
-+ reg_gmac_3v3: gmac-3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "gmac-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ startup-delay-us = <100000>;
-+ enable-active-high;
-+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
-+ };
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&emac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emac_rgmii_pins>;
-+ phy-supply = <®_gmac_3v3>;
-+ phy-handle = <&ext_rgmii_phy>;
-+ phy-mode = "rgmii";
-+ status = "okay";
-+};
-+
-+&external_mdio {
-+ ext_rgmii_phy: ethernet-phy at 1 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <1>;
-+ };
-+};
-+
-+&mmc0 {
-+ vmmc-supply = <®_vcc3v3>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-+ status = "okay";
-+};
-+
-+&mmc1 {
-+ vmmc-supply = <®_vcc3v3>;
-+ bus-width = <4>;
-+ non-removable;
-+ status = "okay";
-+
-+ /*
-+ * Explicitly define the sdio device, so that we can add an ethernet
-+ * alias for it (which e.g. makes u-boot set a mac-address).
-+ */
-+ rtl8189ftv: sdio_wifi at 1 {
-+ reg = <1>;
-+ };
-+};
-+
-+/*
-+&spi0 {
-+ status = "okay";
-+
-+ flash at 0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "mxicy,mx25l1606e", "winbond,w25q128";
-+ reg = <0>;
-+ spi-max-frequency = <40000000>;
-+ };
-+};
-+*/
-+
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};
-+
-+&usb_otg {
-+ dr_mode = "peripheral";
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ /* USB Type-A ports' VBUS is always on */
-+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-+ status = "okay";
-+};
---- a/board/sunxi/MAINTAINERS
-+++ b/board/sunxi/MAINTAINERS
-@@ -327,6 +327,11 @@ M: Icenowy Zheng <icenowy at aosc.xyz>
- S: Maintained
- F: configs/orangepi_zero_defconfig
-
-+ORANGEPI ZERO PLUS BOARD
-+M: Hauke Mehrtens <hauke at hauke-m.de>
-+S: Maintained
-+F: configs/orangepi_zero_plus_defconfig
-+
- ORANGEPI ZERO PLUS 2 BOARD
- M: Jagan Teki <jagan at amarulasolutions.com>
- S: Maintained
---- /dev/null
-+++ b/configs/orangepi_zero_plus_defconfig
-@@ -0,0 +1,16 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN50I_H5=y
-+CONFIG_DRAM_CLK=624
-+CONFIG_DRAM_ZQ=3881977
-+CONFIG_MMC0_CD_PIN="PH13"
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-zero-plus"
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+# CONFIG_CMD_FLASH is not set
-+# CONFIG_SPL_DOS_PARTITION is not set
-+# CONFIG_SPL_EFI_PARTITION is not set
-+CONFIG_SUN8I_EMAC=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
--
2.19.2
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list