[OpenWrt-Devel] ath10k fails to load firmware in r46386 on ESR1750

[Roman Yeryomin]

On 17 July 2015 at 20:54, Matti Laakso <malaakso at elisanet.fi> wrote:
> Hi,
>
>> On an EnGenius ESR1750 running current trunk (r46386), the ath10k driver
>> fails
>> to load the firmware blob - it did work in Barrier Breaker though. Here's
>> the
>> failing dmesg bits:
>
> It seems this board ran uncalibrated on BB and CC, which is no longer
> possible after my patches on trunk. A correct entry needs to be added to
> target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata in
> order to upload calibration data to the firmware. It should be rather easy,

Indeed, didn't notice that

Regards,
Roman
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel