[OpenWrt-Devel] ath10k fails to load firmware in r46386 on ESR1750

[Matti Laakso]

Hi,


> On an EnGenius ESR1750 running current trunk (r46386), the ath10k driver fails
> to load the firmware blob - it did work in Barrier Breaker though. Here's the
> failing dmesg bits:



It seems this board ran uncalibrated on BB and CC, which is no longer possible after my patches on trunk. A correct entry needs to be added to target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata in order to upload calibration data to the firmware. It should be rather easy, but if you don’t feel like doing it yourself, I could make a patch if you could tell me where on flash the calibration data and mac address are located.






Matti
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150717/9ff064f0/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel