[OpenWrt-Devel] [PATCH v2 7/8] sunxi: add support for Lamobo R1
Daniel Golle
daniel at makrotopia.org
Mon Jan 19 20:49:02 EST 2015
Partially based on patchset form Wang Yi <wangyi8848 at gmail.com> published
on https://github.com/Lamobo/Lamobo-R1-OpenWrt as well as on Bananapi DTS.
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
v2: swconfig needs to be built-in, switch is not detected properly otherwise
---
.../sunxi/base-files/etc/uci-defaults/02_network | 6 +
target/linux/sunxi/base-files/lib/sunxi.sh | 4 +
target/linux/sunxi/config-3.18 | 6 +
target/linux/sunxi/image/Makefile | 7 +-
.../patches-3.18/302-dt-sun7i-add-lamobo-r1.patch | 252 +++++++++++++++++++++
target/linux/sunxi/profiles/lamobo-r1.mk | 19 ++
6 files changed, 293 insertions(+), 1 deletion(-)
mode change 100644 => 100755 target/linux/sunxi/image/Makefile
create mode 100644 target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch
create mode 100644 target/linux/sunxi/profiles/lamobo-r1.mk
diff --git a/target/linux/sunxi/base-files/etc/uci-defaults/02_network b/target/linux/sunxi/base-files/etc/uci-defaults/02_network
index 1a9b0ed..09db8d5 100644
--- a/target/linux/sunxi/base-files/etc/uci-defaults/02_network
+++ b/target/linux/sunxi/base-files/etc/uci-defaults/02_network
@@ -16,6 +16,12 @@ case "$( sunxi_board_name )" in
"olinuxino"*)
ucidef_set_interface_lan 'wlan0'
;;
+"lamobo-r1")
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "4 0 1 2 8t"
+ ucidef_add_switch_vlan "switch0" "2" "3 8t"
+ ;;
*)
ucidef_set_interface_lan 'eth0'
;;
diff --git a/target/linux/sunxi/base-files/lib/sunxi.sh b/target/linux/sunxi/base-files/lib/sunxi.sh
index d4dd9fe..444c7e9 100644
--- a/target/linux/sunxi/base-files/lib/sunxi.sh
+++ b/target/linux/sunxi/base-files/lib/sunxi.sh
@@ -105,6 +105,10 @@ sunxi_board_detect() {
board="i12-tvbox"
;;
+ "Lamobo R1")
+ board="lamobo-r1"
+ ;;
+
"Olimex A20-OLinuXino-LIME")
board="olinuxino-lime"
;;
diff --git a/target/linux/sunxi/config-3.18 b/target/linux/sunxi/config-3.18
index 68f1593..3513f6a 100644
--- a/target/linux/sunxi/config-3.18
+++ b/target/linux/sunxi/config-3.18
@@ -58,6 +58,11 @@ CONFIG_AUDIT=y
CONFIG_AUDIT_GENERIC=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_AVERAGE=y
+CONFIG_B53=y
+# CONFIG_B53_MMAP_DRIVER is not set
+CONFIG_B53_PHY_DRIVER=y
+CONFIG_B53_PHY_FIXUP=y
+# CONFIG_B53_SRAB_DRIVER is not set
CONFIG_BINFMT_MISC=y
CONFIG_BLK_CGROUP=y
CONFIG_BLK_DEV_SD=y
@@ -427,6 +432,7 @@ CONFIG_STRICT_DEVMEM=y
CONFIG_SUN4I_TIMER=y
CONFIG_SUN5I_HSTIMER=y
CONFIG_SUNXI_WATCHDOG=y
+CONFIG_SWCONFIG=y
CONFIG_SWIOTLB=y
CONFIG_SWP_EMULATE=y
CONFIG_SYSFS_SYSCALL=y
diff --git a/target/linux/sunxi/image/Makefile b/target/linux/sunxi/image/Makefile
old mode 100644
new mode 100755
index 4475aa8..f627ee3
--- a/target/linux/sunxi/image/Makefile
+++ b/target/linux/sunxi/image/Makefile
@@ -24,7 +24,8 @@ BOARDS:= \
sun7i-a20-cubietruck \
sun7i-a20-olinuxino-lime \
sun7i-a20-olinuxino-micro \
- sun7i-a20-pcduino3
+ sun7i-a20-pcduino3 \
+ sun7i-a20-lamobo-r1
define Image/BuildKernel
mkimage -A arm -O linux -T kernel -C none \
@@ -88,6 +89,10 @@ define Image/Build/Profile/Bananapro
$(call Image/Build/SDCard,$(1),sun7i-a20-bananapro)
endef
+define Image/Build/Profile/Lamobo_R1
+ $(call Image/Build/SDCard,$(1),sun7i-a20-lamobo-r1)
+endef
+
define Image/Build/Profile/Cubieboard
$(call Image/Build/SDCard,$(1),sun4i-a10-cubieboard)
endef
diff --git a/target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch b/target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch
new file mode 100644
index 0000000..82c8bd5
--- /dev/null
+++ b/target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch
@@ -0,0 +1,252 @@
+Index: linux-3.18.2/arch/arm/boot/dts/Makefile
+===================================================================
+--- linux-3.18.2.orig/arch/arm/boot/dts/Makefile
++++ linux-3.18.2/arch/arm/boot/dts/Makefile
+@@ -441,6 +441,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
+ sun7i-a20-cubietruck.dtb \
+ sun7i-a20-hummingbird.dtb \
+ sun7i-a20-i12-tvbox.dtb \
++ sun7i-a20-lamobo-r1.dtb \
+ sun7i-a20-olinuxino-lime.dtb \
+ sun7i-a20-olinuxino-micro.dtb \
+ sun7i-a20-pcduino3.dtb
+Index: linux-3.18.2/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+===================================================================
+--- /dev/null
++++ linux-3.18.2/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+@@ -0,0 +1,235 @@
++/*
++ * Copyright 2015 Daniel Golle <daniel at makrotopia.org>
++ * Copyright 2014 Hans de Goede <hdegoede at redhat.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This library is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This library is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public
++ * License along with this library; if not, write to the Free
++ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
++ * MA 02110-1301 USA
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++/include/ "sun7i-a20.dtsi"
++/include/ "sunxi-common-regulators.dtsi"
++#include <dt-bindings/input/input.h>
++
++/ {
++ model = "Lamobo R1";
++ compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
++
++ soc at 01c00000 {
++ spi0: spi at 01c05000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi0_pins_a>;
++ status = "okay";
++ };
++
++ mmc0: mmc at 01c0f000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo>;
++ vmmc-supply = <®_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 7 10 0>; /* PH10 */
++ cd-inverted;
++ status = "okay";
++ };
++
++ usbphy: phy at 01c13400 {
++ usb1_vbus-supply = <®_usb1_vbus>;
++ usb2_vbus-supply = <®_usb2_vbus>;
++ status = "okay";
++ };
++
++ ehci0: usb at 01c14000 {
++ status = "okay";
++ };
++
++ ohci0: usb at 01c14400 {
++ status = "okay";
++ };
++
++ ahci: sata at 01c18000 {
++ target-supply = <®_ahci_5v>;
++ status = "okay";
++ };
++
++ ehci1: usb at 01c1c000 {
++ status = "okay";
++ };
++
++ ohci1: usb at 01c1c400 {
++ status = "okay";
++ };
++
++ pinctrl at 01c20800 {
++ mmc0_cd_pin_lamobo: mmc0_cd_pin at 0 {
++ allwinner,pins = "PH10";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <0>;
++ allwinner,pull = <1>;
++ };
++
++ gmac_power_pin_lamobo: gmac_power_pin at 0 {
++ allwinner,pins = "PH23";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++
++ led_pins_lamobo: led_pins at 0 {
++ allwinner,pins = "PH2";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <1>;
++ allwinner,pull = <0>;
++ };
++ };
++
++ lradc: lradc at 01c22800 {
++ allwinner,chan0-step = <200>;
++ linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
++ KEY_MENU KEY_SEARCH KEY_HOME
++ KEY_ESC KEY_ENTER>;
++ status = "okay";
++ };
++
++ ir0: ir at 01c21800 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&ir0_pins_a>;
++ status = "okay";
++ };
++
++ uart0: serial at 01c28000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++ };
++
++ uart3: serial at 01c28c00 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart3_pins_b>;
++ status = "okay";
++ };
++
++ uart7: serial at 01c29c00 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart7_pins_a>;
++ status = "okay";
++ };
++
++ i2c0: i2c at 01c2ac00 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins_a>;
++ status = "okay";
++
++ axp209: pmic at 34 {
++ compatible = "x-powers,axp209";
++ reg = <0x34>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 8>;
++
++ interrupt-controller;
++ #interrupt-cells = <1>;
++ };
++ };
++
++ i2c1: i2c at 01c2b000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c1_pins_a>;
++ status = "okay";
++ };
++
++ i2c2: i2c at 01c2b400 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c2_pins_a>;
++ status = "okay";
++ };
++
++ gmac: ethernet at 01c50000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_pins_rgmii_a>;
++ phy = <&phy1>;
++ phy-mode = "rgmii";
++ phy-supply = <®_gmac_3v3>;
++ status = "okay";
++
++ phy1: ethernet-phy at 1 {
++ reg = <1>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&led_pins_lamobo>;
++
++ green {
++ label = "lamobo:green:usr";
++ gpios = <&pio 7 24 0>;
++ default-state = "on";
++ };
++ };
++
++ reg_ahci_5v: ahci-5v {
++ status = "okay";
++ };
++
++ reg_usb1_vbus: usb1-vbus {
++ status = "okay";
++ };
++
++ reg_usb2_vbus: usb2-vbus {
++ status = "okay";
++ };
++
++ reg_gmac_3v3: gmac-3v3 {
++ compatible = "regulator-fixed";
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_power_pin_lamobo>;
++ regulator-name = "gmac-3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ startup-delay-us = <100000>;
++ enable-active-high;
++ gpio = <&pio 7 23 0>;
++ status = "okay";
++ };
++};
diff --git a/target/linux/sunxi/profiles/lamobo-r1.mk b/target/linux/sunxi/profiles/lamobo-r1.mk
new file mode 100644
index 0000000..4bc1185
--- /dev/null
+++ b/target/linux/sunxi/profiles/lamobo-r1.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Lamobo_R1
+ NAME:=Lamobo R1
+ PACKAGES:=\
+ uboot-sunxi-Lamobo_R1 kmod-ata-sunxi kmod-rtl8192cu \
+ swconfig wpad-mini
+endef
+
+define Profile/Lamobo_R1/Description
+ Package set optimized for the Lamobo R1
+endef
+
+$(eval $(call Profile,Lamobo_R1))
--
2.2.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list