[OpenWrt-Devel] [PATCH] [ramips] : add support for Kingston MLWG2
L. D. Pinney
ldpinney at gmail.com
Sun Jan 11 17:02:17 EST 2015
This patch adds support for the Kingston Mobilelite Wireless G2 (MLWG2)
http://wiki.openwrt.org/toh/kingston/mlwg2
https://github.com/gmacario/kingston-mlwg2-hack/wiki/Testing-OpenWrt-on-MLWG2
Tested-by: Gianpaolo Macario <gmacario at gmail.com>
Signed-off-by: L. D. Pinney <ldpinney at gmail.com>
---
target/linux/ramips/base-files/etc/board.d/01_leds | 4 +++
target/linux/ramips/base-files/etc/board.d/02_network | 3 ++
target/linux/ramips/base-files/etc/diag.sh | 3 ++
target/linux/ramips/base-files/lib/ramips.sh | 3 ++
target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/MLWG2.dts | 118 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
target/linux/ramips/image/Makefile | 2 ++
7 files changed, 134 insertions(+)
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 405a6c0..23e310e 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -130,6 +130,10 @@ case $board in
set_wifi_led "kingston:blue:wifi"
ucidef_set_led_default "system" "system" "kingston:blue:system" "1"
;;
+ mlwg2)
+ set_wifi_led "kingston:blue:wifi"
+ ucidef_set_led_default "system" "system" "kingston:blue:system" "1"
+ ;;
mofi3500-3gn)
set_usb_led "mofi3500-3gn:green:usb"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index a86466e..aad1197 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -61,6 +61,9 @@ ramips_setup_interfaces()
mlw221)
ucidef_set_interface_lan "eth0.2"
;;
+ mlwg2)
+ ucidef_set_interface_lan "eth0.1"
+ ;;
wizard8800 | \
wl-330n | \
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 103dfcd..65ef0db 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -88,6 +88,9 @@ get_status_led() {
mlw221)
status_led="kingston:blue:status"
;;
+ mlwg2)
+ status_led="kingston:blue:system"
+ ;;
mofi3500-3gn)
status_led="mofi3500-3gn:green:status"
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 540da33..379713b 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -187,6 +187,9 @@ ramips_board_detect() {
*"Kingston MLW221")
name="mlw221"
;;
+ *"Kingston MLWG2")
+ name="mlwg2"
+ ;;
*"Linksys E1700")
name="e1700"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 95cad63..b5eecfc 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -58,6 +58,7 @@ platform_check_image() {
m3 | \
m4 | \
mlw221 | \
+ mlwg2 | \
mofi3500-3gn | \
mpr-a1 | \
mpr-a2 | \
diff --git a/target/linux/ramips/dts/MLWG2.dts b/target/linux/ramips/dts/MLWG2.dts
index e69de29..c7ce146 100644
--- a/target/linux/ramips/dts/MLWG2.dts
+++ b/target/linux/ramips/dts/MLWG2.dts
@@ -0,0 +1,118 @@
+/dts-v1/;
+
+/include/ "mt7620n.dtsi"
+
+/ {
+ compatible = "mlwG2", "ralink,mt7620n-soc";
+ model = "Kingston MLWG2";
+
+ palmbus at 10000000 {
+ gpio0: gpio at 600 {
+ status = "okay";
+ };
+
+ gpio2: gpio at 660 {
+ status = "okay";
+ };
+
+ gpio3: gpio at 688 {
+ status = "okay";
+ };
+
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l12805d";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xf60000>;
+ };
+
+ partition at fb0000 {
+ label = "user-config";
+ reg = <0xfb0000 0x50000>;
+ };
+ };
+ };
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+
+ ethernet at 10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "wllll";
+ };
+
+ wmac at 10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ system {
+ label = "kingston:blue:system";
+ gpios = <&gpio2 3 1>;
+ };
+ wifi {
+ label = "kingston:blue:wifi";
+ gpios = <&gpio3 0 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+ system {
+ label = "system";
+ gpios = <&gpio0 2 1>;
+ linux,code = <0x211>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 82cadd7..21c8a8d 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -828,6 +828,7 @@ Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750d
Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1,Y1)
Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1s,Y1S)
Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221)
+Image/Build/Profile/MLWG2=$(call BuildFirmware/Default16M/$(1),$(1),mlwg2,MLWG2)
Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
@@ -855,6 +856,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/Y1,$(1))
$(call Image/Build/Profile/Y1S,$(1))
$(call Image/Build/Profile/MLW221,$(1))
+ $(call Image/Build/Profile/MLWG2,$(1))
$(call Image/Build/Profile/WMR300,$(1))
$(call Image/Build/Profile/RT-N14U,$(1))
$(call Image/Build/Profile/WR8305RT,$(1))
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list