[OpenWrt-Devel] [PATCH 3/3 v3] [Lantiq] [P2812HNUFX] Remove old P2812HNUFX dts
Sylwester Petela (ScApi)
sscapi at gmail.com
Sun Jan 11 11:49:21 EST 2015
Remove unused P2812HNUFX board definition.
Signed-off-by: Sylwester Petela <sscapi at gmail.com>
---
target/linux/lantiq/dts/P2812HNUFX.dts | 308 ---------------------
1 files changed, 0 insertions(+), 308 deletions(-)
diff --git a/target/linux/lantiq/dts/P2812HNUFX.dts b/target/linux/lantiq/dts/P2812HNUFX.dts
deleted file mode 100644
index 5af10d4..0000000
--- a/target/linux/lantiq/dts/P2812HNUFX.dts
+++ /dev/null
@@ -1,308 +0,0 @@
-/dts-v1/;
-
-/include/ "vr9.dtsi"
-
-/ {
- model = "P2812HNUFX - ZyXEL P-2812HNU-Fx";
-
- chosen {
- /*bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";*/
- };
-
- memory at 0 {
- reg = <0x0 0x8000000>;
- };
-
- fpi at 10000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,fpi", "simple-bus";
- ranges = <0x0 0x10000000 0xEEFFFFF>;
- reg = <0x10000000 0xEF00000>;
-
- localbus at 0 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "lantiq,localbus", "simple-bus";
-
- nand-parts at 0 {
- compatible = "gen_nand", "lantiq,nand-xway";
- lantiq,cs = <1>;
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x00000 0x40000>;
- };
-
- partition at 40000 {
- label = "u-boot environment";
- reg = <0x40000 0x20000>;
- };
-
- partition at 60000 {
- label = "root";
- reg = <0x60000 0x7fa0000>;
- };
- };
- };
-
- gpio: pinmux at E100B10 {
- compatible = "lantiq,pinctrl-xr9";
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- interrupt-parent = <&icu0>;
- interrupts = <166 135 66 40 41 42 38>;
-
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xE100B10 0xA0>;
-
- state_default: pinmux {
- mdio {
- lantiq,groups = "mdio";
- lantiq,function = "mdio";
- };
- gphy-leds {
- lantiq,groups = "gphy0 led1", "gphy1 led1",
- "gphy0 led2", "gphy1 led2";
- lantiq,function = "gphy";
- lantiq,pull = <2>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- stp {
- lantiq,groups = "stp";
- lantiq,function = "stp";
- lantiq,pull = <2>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- pci {
- lantiq,groups = "gnt1", "req1";
- lantiq,function = "pci";
- };
- pci-rst {
- lantiq,pins = "io21";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- ifxhcd-rst {
- lantiq,pins = "io33";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- nand {
- lantiq,groups = "nand cle", "nand ale",
- "nand rd", "nand cs1", "nand rdy";
- lantiq,function = "ebu";
- lantiq,pull = <1>;
- };
- };
- };
-
- eth at E108000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-net";
- reg = < 0xE108000 0x3000 /* switch */
- 0xE10B100 0x70 /* mdio */
- 0xE10B1D8 0x30 /* mii */
- 0xE10B308 0x30 /* pmac */
- >;
- interrupt-parent = <&icu0>;
- interrupts = <73 72>;
-
- lan: interface at 0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mac-address = [ 00 11 22 33 44 55 ];
- lantiq,switch;
-
- ethernet at 0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- ethernet at 1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- };
- ethernet at 2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet at 4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- ethernet at 5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio at 0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
- phy0: ethernet-phy at 0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy1: ethernet-phy at 1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy at 5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy at 11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy at 13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
- };
-
- stp: stp at E100BB0 {
- compatible = "lantiq,gpio-stp-xway";
- reg = <0xE100BB0 0x40>;
- #gpio-cells = <2>;
- gpio-controller;
-
- lantiq,shadow = <0xffffff>;
- lantiq,groups = <0x7>;
- /*
- lantiq,dsl = <0x3>;
- lantiq,phy1 = <0x7>;
- lantiq,phy2 = <0x7>;
- */
- };
-
- ifxhcd at E101000 {
- status = "okay";
- gpios = <&gpio 33 0>;
- lantiq,portmask = <0x3>;
- };
-
- pci at E105400 {
- lantiq,bus-clock = <33333333>;
- /* lantiq,external-clock; */
- lantiq,delay-hi = <0>; /* 0ns delay */
- lantiq,delay-lo = <0>; /* 0.0ns delay */
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- 0x7000 0 0 1 &icu0 29 //1 // slot 14, irq 29
- >;
- gpio-reset = <&gpio 21 0>;
- req-mask = <0x1>; /* GNT1 */
- status = "okay";
- };
- };
-
- gphy-xrx200 {
- compatible = "lantiq,phy-xrx200";
- firmware = "lantiq/vr9_phy11g_a1x.bin";
- phys = [ 00 01 ];
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
- reset {
- label = "reset";
- gpios = <&gpio 39 1>;
- linux,code = <0x198>;
- };
- rfkill {
- label = "rfkill";
- gpios = <&gpio 1 1>;
- linux,code = <0xf7>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- internet2 {
- label = "internet2";
- gpios = <&stp 16 1>;
- };
- internet {
- label = "internet";
- gpios = <&stp 17 1>;
- };
- dsl {
- label = "dsl";
- gpios = <&stp 18 1>;
- };
- dsl2 {
- label = "dsl2";
- gpios = <&stp 19 1>;
- };
- wifi2 {
- label = "wifi2";
- gpios = <&stp 20 1>;
- };
- wlan {
- label = "wifi";
- gpios = <&stp 21 1>;
- };
- power2 {
- label = "power2";
- gpios = <&stp 22 1>;
- };
- power {
- label = "power";
- gpios = <&stp 23 1>;
- };
- usb1 {
- label = "usb";
- gpios = <&gpio 38 1>;
- };
- usb2 {
- label = "usb2";
- gpios = <&gpio 44 1>;
- };
- phone1 {
- label = "phone1";
- gpios = <&gpio 11 1>;
- };
- phone1warn {
- label = "phone1warn";
- gpios = <&gpio 12 1>;
- };
- phone2 {
- label = "phone2";
- gpios = <&gpio 28 1>;
- };
- phone2warn {
- label = "phone2warn";
- gpios = <&gpio 26 1>;
- };
- };
-};
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list