[OpenWrt-Devel] [PATCH] ramips: add support for Nexx WT1520
John Crispin
blogic at openwrt.org
Tue Sep 16 12:19:53 EDT 2014
Hi,
looks much better ... 2 comments inline ...
On 16/09/2014 18:16, rogerpueyo at rogerpueyo.com wrote:
> From: Roger Pueyo Centelles <openwrt at rogerpueyo.com>
>
> ---
> target/linux/ramips/base-files/etc/board.d/01_leds | 3 +
> .../linux/ramips/base-files/etc/board.d/02_network | 1 +
> target/linux/ramips/base-files/etc/diag.sh | 3 +
> target/linux/ramips/base-files/lib/ramips.sh | 3 +
> .../ramips/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ramips/dts/NEXXWT1520.dts | 108 +++++++++++++++++++++
> target/linux/ramips/image/Makefile | 9 ++
> target/linux/ramips/rt305x/profiles/nexx.mk | 17 ++++
> 8 files changed, 145 insertions(+)
> create mode 100644 target/linux/ramips/dts/NEXXWT1520.dts
> create mode 100644 target/linux/ramips/rt305x/profiles/nexx.mk
>
> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
> index 01e2363..1806ff2 100755
> --- a/target/linux/ramips/base-files/etc/board.d/01_leds
> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
> @@ -112,6 +112,9 @@ case $board in
> hlk-rm04)
> set_wifi_led "rt2800pci-phy0::radio"
> ;;
> + nexx-wt1520)
> + set_wifi_led "rt2800pci-phy0::radio"
> + ;;
> all0239-3g|\
> hw550-3g)
> set_usb_led "hw550-3g:green:usb"
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
> index e027b3b..765d398 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -103,6 +103,7 @@ ramips_setup_interfaces()
> dir-320-b1 | \
> dir-615-h1 | \
> hlk-rm04 | \
> + nexx-wt1520 | \
> mzk-w300nh2 | \
> mzk-750dhp)
> ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
> diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
> index 9ad7ccb..472da4b 100755
> --- a/target/linux/ramips/base-files/etc/diag.sh
> +++ b/target/linux/ramips/base-files/etc/diag.sh
> @@ -63,6 +63,9 @@ get_status_led() {
> hlk-rm04)
> status_led="hlk-rm04:red:power"
> ;;
> + nexx-wt1520)
> + status_led="nexx-wt1520:white:power"
> + ;;
> all0239-3g|\
> hw550-3g)
> status_led="hw550-3g:green:status"
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
> index bb42ace..0a09225 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -157,6 +157,9 @@ ramips_board_detect() {
> *"HILINK HLK-RM04")
> name="hlk-rm04"
> ;;
> + *"Nexx WT1520")
> + name="nexx-wt1520"
> + ;;
> *"HAME MPR-A1")
> name="mpr-a1"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index 407c218..8ff2da6 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -52,6 +52,7 @@ platform_check_image() {
> hw550-3g | \
> hg255d | \
> hlk-rm04 | \
> + nexx-wt1520 | \
> ip2202 | \
> m3 | \
> m4 | \
> diff --git a/target/linux/ramips/dts/NEXXWT1520.dts b/target/linux/ramips/dts/NEXXWT1520.dts
> new file mode 100644
> index 0000000..c89bea1
> --- /dev/null
> +++ b/target/linux/ramips/dts/NEXXWT1520.dts
> @@ -0,0 +1,108 @@
> +/dts-v1/;
> +
> +/include/ "rt5350.dtsi"
> +
> +/ {
> + compatible = "NEXXWT1520", "ralink,rt5350-soc";
> + model = "Nexx WT1520";
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x2000000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS1,57600";
> + };
> +
> + palmbus at 10000000 {
> + uart at 500 {
> + status = "okay";
> + };
> +
> + spi at b00 {
> + status = "okay";
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "w25q32";
> + reg = <0 0>;
> + linux,modalias = "m25p80", "s25fl064k";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0x3b0000>;
> + };
> + };
> + };
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "jtag";
> + ralink,function = "gpio";
> + };
> + };
> + };
> +
> + ethernet at 10100000 {
> + mtd-mac-address = <&factory 0x4>;
> + };
> +
> + wmac at 10180000 {
> + ralink,mtd-eeprom = <&factory 0>;
> + };
> +
> + ehci at 101c0000 {
> + status = "okay";
> + };
> +
> + ohci at 101c1000 {
> + status = "okay";
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + power {
> + label = "nexx-wt1520:white:power";
> + gpios = <&gpio0 0 1>;
> + };
> + };
> +
> + gpio_export {
> + compatible = "gpio-export";
> + #size-cells = <0>;
> + usb-mode {
> + gpio-export,name = "usb-mode";
is this the usb power on/off gpio ? if so please just call it usb or
usb-power.
> + gpio-export,output = <0>;
> + gpios = <&gpio0 18 0>;
> + };
> + };
> +};
> diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
> index 35057e4..6f7c51c 100644
> --- a/target/linux/ramips/image/Makefile
> +++ b/target/linux/ramips/image/Makefile
> @@ -434,6 +434,14 @@ define BuildFirmware/HLKRM04/initramfs
> endef
> Image/Build/Profile/HLKRM04=$(call BuildFirmware/HLKRM04/$(1),$(1),hlk-rm04,HLKRM04,HLK-RM02)
>
> +BuildFirmware/NEXXWT1520/squashfs=$(call BuildFirmware/Default4M/squashfs,$(1),$(2),$(3),$(4))
> +define BuildFirmware/NEXXWT1520/initramfs
> + $(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
> + #mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call imgname,$(1),$(2))-factory.bin;
do we need to add this commented out line ?
rest looks fine ...
John
> +endef
> +
> +Image/Build/Profile/NEXXWT1520=$(call BuildFirmware/NEXXWT1520/$(1),$(1),nexx-wt1520,NEXXWT1520,NEXXWT1520)
> +
> Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
>
> Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
> @@ -598,6 +606,7 @@ define Image/Build/Profile/Default
> $(call Image/Build/Profile/FREESTATION5,$(1))
> # $(call Image/Build/Profile/HG255D,$(1))
> $(call Image/Build/Profile/HLKRM04,$(1))
> + $(call Image/Build/Profile/NEXXWT1520,$(1))
> $(call Image/Build/Profile/HW550-3G,$(1))
> $(call Image/Build/Profile/IP2202,$(1))
> $(call Image/Build/Profile/M3,$(1))
> diff --git a/target/linux/ramips/rt305x/profiles/nexx.mk b/target/linux/ramips/rt305x/profiles/nexx.mk
> new file mode 100644
> index 0000000..45d81ec
> --- /dev/null
> +++ b/target/linux/ramips/rt305x/profiles/nexx.mk
> @@ -0,0 +1,17 @@
> +#
> +# Copyright (C) 2013 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public License v2.
> +# See /LICENSE for more information.
> +#
> +
> +define Profile/NEXXWT1520
> + NAME:=Nexx WT1520
> + PACKAGES:=kmod-usb2
> +endef
> +
> +define Profile/NEXXWT1520/Description
> + Package set for NEXXWT1520
> +endef
> +
> +$(eval $(call Profile,NEXXWT1520)
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list