[OpenWrt-Devel] [PATCH] ramips: add support for Nexx WT1520

rogerpueyo at rogerpueyo.com rogerpueyo at rogerpueyo.com
Tue Sep 16 12:16:12 EDT 2014


From: Roger Pueyo Centelles <openwrt at rogerpueyo.com>

---
 target/linux/ramips/base-files/etc/board.d/01_leds |   3 +
 .../linux/ramips/base-files/etc/board.d/02_network |   1 +
 target/linux/ramips/base-files/etc/diag.sh         |   3 +
 target/linux/ramips/base-files/lib/ramips.sh       |   3 +
 .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
 target/linux/ramips/dts/NEXXWT1520.dts             | 108 +++++++++++++++++++++
 target/linux/ramips/image/Makefile                 |   9 ++
 target/linux/ramips/rt305x/profiles/nexx.mk        |  17 ++++
 8 files changed, 145 insertions(+)
 create mode 100644 target/linux/ramips/dts/NEXXWT1520.dts
 create mode 100644 target/linux/ramips/rt305x/profiles/nexx.mk

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 01e2363..1806ff2 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -112,6 +112,9 @@ case $board in
 	hlk-rm04)
 		set_wifi_led "rt2800pci-phy0::radio"
 		;;
+	nexx-wt1520)
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
 	all0239-3g|\
 	hw550-3g)
 		set_usb_led "hw550-3g:green:usb"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index e027b3b..765d398 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -103,6 +103,7 @@ ramips_setup_interfaces()
 	dir-320-b1 | \
 	dir-615-h1 | \
 	hlk-rm04 | \
+	nexx-wt1520 | \
 	mzk-w300nh2 | \
 	mzk-750dhp)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 9ad7ccb..472da4b 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -63,6 +63,9 @@ get_status_led() {
 	hlk-rm04)
 		status_led="hlk-rm04:red:power"
 		;;
+	nexx-wt1520)
+		status_led="nexx-wt1520:white:power"
+		;;
 	all0239-3g|\
 	hw550-3g)
 		status_led="hw550-3g:green:status"
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index bb42ace..0a09225 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -157,6 +157,9 @@ ramips_board_detect() {
 	*"HILINK HLK-RM04")
 		name="hlk-rm04"
 		;;
+	*"Nexx WT1520")
+		name="nexx-wt1520"
+		;;
 	*"HAME MPR-A1")
  		name="mpr-a1"
  		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 407c218..8ff2da6 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -52,6 +52,7 @@ platform_check_image() {
 	hw550-3g | \
 	hg255d | \
 	hlk-rm04 | \
+	nexx-wt1520 | \
 	ip2202 | \
 	m3 | \
 	m4 | \
diff --git a/target/linux/ramips/dts/NEXXWT1520.dts b/target/linux/ramips/dts/NEXXWT1520.dts
new file mode 100644
index 0000000..c89bea1
--- /dev/null
+++ b/target/linux/ramips/dts/NEXXWT1520.dts
@@ -0,0 +1,108 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible = "NEXXWT1520", "ralink,rt5350-soc";
+	model = "Nexx WT1520";
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS1,57600";
+	};
+
+	palmbus at 10000000 {
+		uart at 500 {
+			status = "okay";
+		};
+
+		spi at b00 {
+			status = "okay";
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q32";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "s25fl064k";
+				spi-max-frequency = <10000000>;
+
+				partition at 0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition at 30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition at 40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition at 50000 {
+					label = "firmware";
+					reg = <0x50000 0x3b0000>;
+				};
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "jtag";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet at 10100000 {
+		mtd-mac-address = <&factory 0x4>;
+	};
+
+	wmac at 10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	ehci at 101c0000 {
+		status = "okay";
+	};
+
+	ohci at 101c1000 {
+		status = "okay";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "nexx-wt1520:white:power";
+			gpios = <&gpio0 0 1>;
+		};
+	};
+
+        gpio_export {
+                compatible = "gpio-export";
+                #size-cells = <0>;
+                usb-mode {
+                        gpio-export,name = "usb-mode";
+                        gpio-export,output = <0>;
+                        gpios = <&gpio0 18 0>;
+                };
+        };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 35057e4..6f7c51c 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -434,6 +434,14 @@ define BuildFirmware/HLKRM04/initramfs
 endef
 Image/Build/Profile/HLKRM04=$(call BuildFirmware/HLKRM04/$(1),$(1),hlk-rm04,HLKRM04,HLK-RM02)
 
+BuildFirmware/NEXXWT1520/squashfs=$(call BuildFirmware/Default4M/squashfs,$(1),$(2),$(3),$(4))
+define BuildFirmware/NEXXWT1520/initramfs
+	$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
+	#mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call imgname,$(1),$(2))-factory.bin;
+endef
+
+Image/Build/Profile/NEXXWT1520=$(call BuildFirmware/NEXXWT1520/$(1),$(1),nexx-wt1520,NEXXWT1520,NEXXWT1520)
+
 Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
 
 Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
@@ -598,6 +606,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/FREESTATION5,$(1))
 #	$(call Image/Build/Profile/HG255D,$(1))
 	$(call Image/Build/Profile/HLKRM04,$(1))
+	$(call Image/Build/Profile/NEXXWT1520,$(1))
 	$(call Image/Build/Profile/HW550-3G,$(1))
 	$(call Image/Build/Profile/IP2202,$(1))
 	$(call Image/Build/Profile/M3,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/nexx.mk b/target/linux/ramips/rt305x/profiles/nexx.mk
new file mode 100644
index 0000000..45d81ec
--- /dev/null
+++ b/target/linux/ramips/rt305x/profiles/nexx.mk
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/NEXXWT1520
+	NAME:=Nexx WT1520
+	PACKAGES:=kmod-usb2
+endef
+
+define Profile/NEXXWT1520/Description
+	Package set for NEXXWT1520
+endef
+
+$(eval $(call Profile,NEXXWT1520))
-- 
2.1.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list