[PATCH] x86 64: Add new device Cordoba Edge Platform

[Paul Spooren]

Hi,

We kind of don’t add image just to contain extra drivers. Extra UCI defaults for eth ordering are fine but please don’t add an extra image if it just contains 1-2 extra packages, installable via the ImageBuilder or OPKG.

> 
>> On Oct 23, 2023, at 8:52 PM, Xiaojun Liu <xiaojun.liu at silicom.co.il> wrote:
>> 
>> Add new device Cordoba Edge Platform
>> Device name:Cordoba Edge Platform
>> hardware specifications: CPU - Intel Atom C3000
>>                         WiFi - mt7915e
>> 
>> Signed-off-by: Xiaojun Liu mailto:xiaojun.liu at silicom.co.il
>> ---
>> 
>> target/linux/x86/base-files/etc/board.d/02_network | 11 +++++++++++
>> target/linux/x86/image/64.mk                       | 10 ++++++++++
>> 2 files changed, 21 insertions(+)
>> 
>> 
>> diff --git a/target/linux/x86/base-files/etc/board.d/02_network 
>> b/target/linux/x86/base-files/etc/board.d/02_network
>> index e00e8c04dd..be56153695 100644
>> --- a/target/linux/x86/base-files/etc/board.d/02_network
>> +++ b/target/linux/x86/base-files/etc/board.d/02_network
>> @@ -75,6 +75,17 @@ traverse-technologies-geos)
>>        macaddr="$(cat /sys/class/net/eth0/address)" 2>/dev/null
>>        [ -n "$macaddr" ] && ucidef_set_interface_macaddr "wan" "$macaddr"
>>        ;;
>> +silicom-80500-0214-e53)
>> +        ucidef_set_network_device_path "wan0" "pci0000:00/0000:00:16.0/0000:03:00.0"
>> +        ucidef_set_network_device_path "wan1" "pci0000:00/0000:00:16.0/0000:03:00.1"
>> +        ucidef_set_network_device_path "media0" "pci0000:00/0000:00:17.0/0000:02:00.0"
>> +        ucidef_set_network_device_path "media1" "pci0000:00/0000:00:17.0/0000:02:00.1"
>> +        ucidef_set_network_device_path "eth0" "pci0000:00/0000:00:0c.0/0000:04:00.0"
>> +        ucidef_set_network_device_path "eth1" "pci0000:00/0000:00:0e.0/0000:05:00.0"
>> +        ucidef_set_network_device_path "eth2" "pci0000:00/0000:00:0f.0/0000:06:00.0"
>> +        ucidef_set_network_device_path "eth3" "pci0000:00/0000:00:10.0/0000:07:00.0"
>> +        ucidef_set_interfaces_lan_wan "eth0 eth1 eth2 eth3" "wan0"
>> +        ;;
>> esac
>> board_config_flush
>> 
>> diff --git a/target/linux/x86/image/64.mk 
>> b/target/linux/x86/image/64.mk index 5ec9978b66..4addddeb98 100644
>> --- a/target/linux/x86/image/64.mk
>> +++ b/target/linux/x86/image/64.mk
>> @@ -8,3 +8,13 @@ define Device/generic
>>   GRUB2_VARIANT := generic
>> endef
>> TARGET_DEVICES += generic
>> +
>> +define Device/cordoba
>> +  DEVICE_VENDOR := Cordoba
>> +  DEVICE_MODEL := x86/64
>> +  DEVICE_PACKAGES += \
>> +        kmod-igc kmod-ixgbe \
>> +        kmod-mt7915-firmware
>> +  GRUB2_VARIANT := generic
>> +endef
>> +TARGET_DEVICES += cordoba

Please remove those lines in 64.mk.

Thanks for you work and interest in OpenWrt support for your device.

Best,
Paul