[PATCH] ramips: convert the remaining mtd-mac-address to NVMEM format

Shiji Yang yangshiji66 at outlook.com
Sun Oct 1 20:42:08 PDT 2023


From: Shiji Yang <yangshiji66 at qq.com>

`mtd-mac-address` has been abandoned. Therefore, convert them to
NVMEM format. This patch also removes some useless mtd-mac-address
properties.

Signed-off-by: Shiji Yang <yangshiji66 at qq.com>
---
 .../ramips/dts/mt7620a_netcore_nw5212.dts     | 11 ++++++++-
 .../ramips/dts/mt7620n_netgear_pr2000.dts     | 15 ++++++++++--
 .../ramips/dts/mt7621_tplink_mr600-v2-eu.dts  |  1 -
 .../ramips/dts/mt7621_zyxel_lte3301-plus.dts  |  1 -
 .../dts/mt7628an_comfast_cf-wr617ac.dts       | 23 +++++++++++--------
 5 files changed, 36 insertions(+), 15 deletions(-)

diff --git a/target/linux/ramips/dts/mt7620a_netcore_nw5212.dts b/target/linux/ramips/dts/mt7620a_netcore_nw5212.dts
index 25287ebc0b..949f686e95 100644
--- a/target/linux/ramips/dts/mt7620a_netcore_nw5212.dts
+++ b/target/linux/ramips/dts/mt7620a_netcore_nw5212.dts
@@ -93,9 +93,16 @@
 			};
 
 			factory: partition at 40000 {
+				compatible = "nvmem-cells";
 				label = "factory";
 				reg = <0x40000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
 				read-only;
+
+				macaddr_factory_28: macaddr at 28 {
+					reg = <0x28 0x6>;
+				};
 			};
 
 			partition at 50000 {
@@ -115,8 +122,10 @@
 };
 
 &ethernet {
-	mtd-mac-address = <&factory 0x28>;
 	mediatek,portmap = "llllw";
+
+	nvmem-cells = <&macaddr_factory_28>;
+	nvmem-cell-names = "mac-address";
 };
 
 &ehci {
diff --git a/target/linux/ramips/dts/mt7620n_netgear_pr2000.dts b/target/linux/ramips/dts/mt7620n_netgear_pr2000.dts
index 6b4dde5432..97bd5474c2 100644
--- a/target/linux/ramips/dts/mt7620n_netgear_pr2000.dts
+++ b/target/linux/ramips/dts/mt7620n_netgear_pr2000.dts
@@ -110,9 +110,16 @@
 			};
 
 			board_data: partition at f70000 {
+				compatible = "nvmem-cells";
 				label = "board_data";
 				reg = <0xf70000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
 				read-only;
+
+				macaddr_board_data_b0: macaddr at b0 {
+					reg = <0xb0 0x6>;
+				};
 			};
 
 			partition at f80000 {
@@ -166,8 +173,10 @@
 };
 
 &ethernet {
-	mtd-mac-address = <&board_data 0xb0>;
 	mediatek,portmap = "wllll";
+
+	nvmem-cells = <&macaddr_board_data_b0>;
+	nvmem-cell-names = "mac-address";
 };
 
 &ehci {
@@ -180,7 +189,9 @@
 
 &wmac {
 	ralink,mtd-eeprom = <&factory 0x0>;
-	mtd-mac-address = <&board_data 0xb0>;
+
+	nvmem-cells = <&macaddr_board_data_b0>;
+	nvmem-cell-names = "mac-address";
 };
 
 &state_default {
diff --git a/target/linux/ramips/dts/mt7621_tplink_mr600-v2-eu.dts b/target/linux/ramips/dts/mt7621_tplink_mr600-v2-eu.dts
index b7475ec15b..69b89e5810 100644
--- a/target/linux/ramips/dts/mt7621_tplink_mr600-v2-eu.dts
+++ b/target/linux/ramips/dts/mt7621_tplink_mr600-v2-eu.dts
@@ -141,7 +141,6 @@
 		nvmem-cells = <&macaddr_romfile_f100>;
 		nvmem-cell-names = "mac-address";
 		mediatek,mtd-eeprom = <&radio 0x0>;
-		mtd-mac-address = <&romfile 0xf100>;
 		ieee80211-freq-limit = <2400000 2500000>;
 	};
 };
diff --git a/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts b/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts
index ed8260534e..120d421b8a 100644
--- a/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts
+++ b/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts
@@ -209,7 +209,6 @@
 	compatible = "nvmem-cells";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	mtd-mac-address = <&factory 0xfe6e>;
 
 	macaddr_factory_fe6e: macaddr at fe6e {
 		reg = <0xfe6e 0x6>;
diff --git a/target/linux/ramips/dts/mt7628an_comfast_cf-wr617ac.dts b/target/linux/ramips/dts/mt7628an_comfast_cf-wr617ac.dts
index 81734ed4fb..bec9e95182 100644
--- a/target/linux/ramips/dts/mt7628an_comfast_cf-wr617ac.dts
+++ b/target/linux/ramips/dts/mt7628an_comfast_cf-wr617ac.dts
@@ -70,9 +70,20 @@
 			};
 
 			factory: partition at 40000 {
+				compatible = "nvmem-cells";
 				label = "factory";
 				reg = <0x40000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
 				read-only;
+
+				macaddr_factory_8004: macaddr at 8004 {
+					reg = <0x8004 0x6>;
+				};
+
+				macaddr_factory_e000: macaddr at e000 {
+					reg = <0xe000 0x6>;
+				};
 			};
 
 			partition at 50000 {
@@ -94,7 +105,8 @@
 		reg = <0x0000 0 0 0 0>;
 		mediatek,mtd-eeprom = <&factory 0x8000>;
 		ieee80211-freq-limit = <5000000 6000000>;
-		mtd-mac-address = < 0x8004>;
+		nvmem-cells = <&macaddr_factory_8004>;
+		nvmem-cell-names = "mac-address";
 		mac-address-increment = <2>;
 	};
 };
@@ -112,12 +124,3 @@
 	status = "okay";
 	mediatek,mtd-eeprom = <&factory 0x0>;
 };
-
-&factory {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	macaddr_factory_e000: macaddr at 4 {
-		reg = <0xe000 0x6>;
-	};
-};
-- 
2.39.2




More information about the openwrt-devel mailing list