Mark lantiq and omap as source only

[Aleksander Bajkowski]

W dniu 03.05.2023 o 20:30, Nick pisze:
>
> On 5/3/23 19:23, Aleksander Bajkowski wrote:
>>
>> W dniu 03.05.2023 o 19:11, Nick pisze:
>>> On 5/3/23 11:07, Nick wrote:
>>>
>>>> I will also try to fetch me some lantiq device from somewhere to 
>>>> support fixing the fdb issues and re-adding it back to 23.X or 
>>>> fixing it before the branch. 
>>> I organized myself now a **FRITZ!Box 7320** and **TP Link 
>>> TD-W8970**. So if anyone wants me to test anything just write me. 
>>> Meanwhile I will also have a look at this issue.
>>
>>
>> This issue only affects the xrx200 target (gswip driver). AVM 7320 is 
>> supported by the xway subtarget and has built-in tantos switch.
> The TP Link TD-W8970 is a xrx200 target. :)
> So we just could have disabled the xrx200 target instead of setting 
> the whole target to source only?
>

Yes, I think it's a good idea.


> I made a mistake, I have a 7330. However, I have also some network 
> issues with this device (no connectity to device but a link).
>

This is a known limitation on the AVM 7320/7330. The DSA driver for this 
switch is missing. Only the first ethernet port works only if the cable 
is connected at boot. Some time ago I acquired an AVM 7330 and started 
writing a driver to replace the patch carried downstream.


> Bests
> Nick
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel