[PATCH] ipq95xx: Add support for IPQ9574 RDP433
Varadarajan Narayanan
quic_varada at quicinc.com
Thu Dec 7 03:20:42 PST 2023
On Thu, Dec 07, 2023 at 11:11:03AM +0100, Robert Marko wrote:
>
> On 07. 12. 2023. 10:59, Varadarajan Narayanan wrote:
> > SoC : QCOM IPQ9574
> > RAM : 2GB DDR4
> > Flash : eMMC 8GB
> > WiFi : 1 x 2.4GHz
> > 1 x 5GHz
> > 1 x 6GHz
> >
> > Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
>
> Without even looking at the code, please split this up as its
> not reviewable at all currently.
>
> Also, I would strongly encourage using Github PR for this.
This patch just has the base SoC/board support and not drivers for
WiFi/ethernet/USB etc. Can you kindly guide on what kind
of split is acceptable for the community.
Thanks
Varada
>
> Regards,
> Robert
>
> > ---
> > target/linux/ipq95xx/Makefile | 20 +
> > target/linux/ipq95xx/base-files/etc/inittab | 18 +
> > target/linux/ipq95xx/config-6.1 | 1206 +++++
> > target/linux/ipq95xx/generic/config-default | 70 +
> > target/linux/ipq95xx/generic/target.mk | 8 +
> > target/linux/ipq95xx/image/Makefile | 35 +
> > target/linux/ipq95xx/image/generic.mk | 14 +
> > ...-qcom-smd-rpm-Add-IPQ9574-compatible.patch | 32 +
> > ...q-pll-refactor-the-driver-to-accommo.patch | 127 +
> > ...pha-pll-Add-support-for-Stromer-PLLs.patch | 229 +
> > ...-Add-IDs-for-IPQ9574-and-its-variant.patch | 38 +
> > ...dd-ipq9574-SoC-and-AL02-board-suppor.patch | 404 ++
> > ...nfig-Enable-IPQ9574-SoC-base-configs.patch | 38 +
> > ...bal-Clock-Controller-driver-for-IPQ9.patch | 4308 +++++++++++++++++
> > ...k-Add-ipq9574-clock-and-reset-defini.patch | 482 ++
> > ...ctrl-qcom-Add-IPQ9574-pinctrl-driver.patch | 889 ++++
> > ...pq9574-Add-support-for-APSS-clock-co.patch | 48 +
> > ...apss-ipq-pll-Add-support-for-IPQ9574.patch | 66 +
> > ...tor-qcom_smd-Add-MP5496-S1-regulator.patch | 43 +
> > ...ipq9574-rename-al02-c7-dts-to-rdp433.patch | 49 +
> > ...pq9574-Drop-bias_pll_ubi_nc_clk-inpu.patch | 44 +
> > ...pq9574-Update-the-size-of-GICC-GICV-.patch | 42 +
> > ...pq9574-add-support-for-RDP418-varian.patch | 166 +
> > ...64-dts-qcom-ipq9574-Add-SMEM-support.patch | 48 +
> > ...pq9574-add-support-for-RDP449-varian.patch | 121 +
> > ...dts-qcom-ipq9574-Add-cpufreq-support.patch | 127 +
> > ...com-ipq9574-Add-SMPA1-regulator-node.patch | 50 +
> > ...s-qcom-ipq9574-Add-RPM-related-nodes.patch | 55 +
> > ...ts-qcom-ipq9574-add-few-device-nodes.patch | 252 +
> > ...-add-few-more-reserved-memory-region.patch | 99 +
> > ...m64-dts-qcom-ipq9574-add-QFPROM-node.patch | 38 +
> > ...pq9574-add-support-for-RDP453-varian.patch | 120 +
> > ...pq9574-add-support-for-RDP454-varian.patch | 120 +
> > ...pq9574-add-few-more-reserved-memory-.patch | 60 +
> > ...pq9574-Use-assigned-clock-rates-for-.patch | 59 +
> > ...om-ipq9574-Fix-hwlock-index-for-SMEM.patch | 36 +
> > ...pq9574-include-the-GPLL0-as-clock-pr.patch | 40 +
> > ...q6018-add-the-GPLL0-clock-also-as-cl.patch | 50 +
> > ...-drop-the-CLK_SET_RATE_PARENT-flag-f.patch | 62 +
> > ...m-use-64-bit-calling-convention-only.patch | 53 +
> > ...com-ipq9574-Add-common-RDP-dtsi-file.patch | 519 ++
> > ...pq9574-populate-the-opp-table-based-.patch | 110 +
> > ...alpha-pll-introduce-stromer-plus-ops.patch | 106 +
> > ...-nvmem-Introduce-cpufreq-for-ipq95xx.patch | 74 +
> > ...-dts-qcom-ipq9574-Enable-WPS-buttons.patch | 66 +
> > ...apss-ipq-pll-add-support-for-IPQ5332.patch | 131 +
> > ...q-pll-Use-stromer-plus-ops-for-strom.patch | 39 +
> > ...dd-STROMER-PLUS-PLL-type-for-IPQ5332.patch | 55 +
> > 48 files changed, 10866 insertions(+)
> > create mode 100644 target/linux/ipq95xx/Makefile
> > create mode 100644 target/linux/ipq95xx/base-files/etc/inittab
> > create mode 100644 target/linux/ipq95xx/config-6.1
> > create mode 100644 target/linux/ipq95xx/generic/config-default
> > create mode 100644 target/linux/ipq95xx/generic/target.mk
> > create mode 100644 target/linux/ipq95xx/image/Makefile
> > create mode 100644 target/linux/ipq95xx/image/generic.mk
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0001-soc-qcom-smd-rpm-Add-IPQ9574-compatible.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0002-clk-qcom-apss-ipq-pll-refactor-the-driver-to-accommo.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0003-clk-qcom-clk-alpha-pll-Add-support-for-Stromer-PLLs.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0004-soc-qcom-socinfo-Add-IDs-for-IPQ9574-and-its-variant.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0005-arm64-dts-qcom-Add-ipq9574-SoC-and-AL02-board-suppor.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0006-arm64-defconfig-Enable-IPQ9574-SoC-base-configs.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0007-clk-qcom-Add-Global-Clock-Controller-driver-for-IPQ9.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0008-dt-bindings-clock-Add-ipq9574-clock-and-reset-defini.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0009-pinctrl-qcom-Add-IPQ9574-pinctrl-driver.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0010-arm64-dts-qcom-ipq9574-Add-support-for-APSS-clock-co.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0011-clk-qcom-apss-ipq-pll-Add-support-for-IPQ9574.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0012-regulator-qcom_smd-Add-MP5496-S1-regulator.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0013-arm64-dts-qcom-ipq9574-rename-al02-c7-dts-to-rdp433.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0014-arm64-dts-qcom-ipq9574-Drop-bias_pll_ubi_nc_clk-inpu.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0015-arm64-dts-qcom-ipq9574-Update-the-size-of-GICC-GICV-.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0016-arm64-dts-qcom-ipq9574-add-support-for-RDP418-varian.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0017-arm64-dts-qcom-ipq9574-Add-SMEM-support.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0018-arm64-dts-qcom-ipq9574-add-support-for-RDP449-varian.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0019-arm64-dts-qcom-ipq9574-Add-cpufreq-support.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0020-arm64-dts-qcom-ipq9574-Add-SMPA1-regulator-node.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0021-arm64-dts-qcom-ipq9574-Add-RPM-related-nodes.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0022-arm64-dts-qcom-ipq9574-add-few-device-nodes.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0023-arm64-dts-qcom-add-few-more-reserved-memory-region.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0024-arm64-dts-qcom-ipq9574-add-QFPROM-node.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0025-arm64-dts-qcom-ipq9574-add-support-for-RDP453-varian.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0026-arm64-dts-qcom-ipq9574-add-support-for-RDP454-varian.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0027-arm64-dts-qcom-ipq9574-add-few-more-reserved-memory-.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0028-arm64-dts-qcom-ipq9574-Use-assigned-clock-rates-for-.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0029-arm64-dts-qcom-ipq9574-Fix-hwlock-index-for-SMEM.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0030-arm64-dts-qcom-ipq9574-include-the-GPLL0-as-clock-pr.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0031-clk-qcom-apss-ipq6018-add-the-GPLL0-clock-also-as-cl.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0032-clk-qcom-ipq9574-drop-the-CLK_SET_RATE_PARENT-flag-f.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0033-firmware-qcom_scm-use-64-bit-calling-convention-only.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0034-arm64-dts-qcom-ipq9574-Add-common-RDP-dtsi-file.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0035-arm64-dts-qcom-ipq9574-populate-the-opp-table-based-.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0036-clk-qcom-clk-alpha-pll-introduce-stromer-plus-ops.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0037-cpufreq-qcom-nvmem-Introduce-cpufreq-for-ipq95xx.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0038-arm64-dts-qcom-ipq9574-Enable-WPS-buttons.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0039-clk-qcom-apss-ipq-pll-add-support-for-IPQ5332.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0040-clk-qcom-apss-ipq-pll-Use-stromer-plus-ops-for-strom.patch
> > create mode 100644 target/linux/ipq95xx/patches-6.1/0041-clk-qcom-Add-STROMER-PLUS-PLL-type-for-IPQ5332.patch
> >
> > diff --git a/target/linux/ipq95xx/Makefile b/target/linux/ipq95xx/Makefile
> > new file mode 100644
> > index 0000000000..e509f4eddd
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/Makefile
> > @@ -0,0 +1,20 @@
> > +include $(TOPDIR)/rules.mk
> > +
> > +ARCH:=aarch64
> > +BOARD:=ipq95xx
> > +BOARDNAME:=Qualcomm Technologies, Inc. IPQ95XX
> > +FEATURES:=squashfs fpu ramdisk nand pcie
> > +CPU_TYPE:=cortex-a73
> > +CPU_SUBTYPE:=neon-vfpv4
> > +SUBTARGETS:=generic
> > +
> > +
> > +KERNELNAME:=Image dtbs
> > +KERNEL_PATCHVER:=6.1
> > +
> > +include $(INCLUDE_DIR)/target.mk
> > +
> > +DEFAULT_PACKAGES += \
> > + e2fsprogs uboot-envtools kmod-leds-gpio kmod-gpio-button-hotplug kmod-button-hotplug
> > +
> > +$(eval $(call BuildTarget))
> > diff --git a/target/linux/ipq95xx/base-files/etc/inittab b/target/linux/ipq95xx/base-files/etc/inittab
> > new file mode 100644
> > index 0000000000..f0f8c76746
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/base-files/etc/inittab
> > @@ -0,0 +1,18 @@
> > +# Copyright (c) 2013, 2020, The Linux Foundation. All rights reserved.
> > +# Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> > +#
> > +# Permission to use, copy, modify, and/or distribute this software for any
> > +# purpose with or without fee is hereby granted, provided that the above
> > +# copyright notice and this permission notice appear in all copies.
> > +#
> > +# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
> > +# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
> > +# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
> > +# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
> > +# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> > +# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> > +# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
> > +
> > +::sysinit:/etc/init.d/rcS S boot
> > +::shutdown:/etc/init.d/rcS K shutdown
> > +ttyMSM0::askfirst:/usr/libexec/login.sh
> > diff --git a/target/linux/ipq95xx/config-6.1 b/target/linux/ipq95xx/config-6.1
> > new file mode 100644
> > index 0000000000..44176e4666
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/config-6.1
> > @@ -0,0 +1,1206 @@
> > +CONFIG_IRQ_DOMAIN=y
> > +CONFIG_IRQ_DOMAIN_HIERARCHY=y
> > +CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
> > +CONFIG_GENERIC_IRQ_IPI=y
> > +CONFIG_GENERIC_MSI_IRQ=y
> > +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
> > +# CONFIG_IRQ_MSI_IOMMU is not set
> > +CONFIG_IRQ_FORCED_THREADING=y
> > +CONFIG_SPARSE_IRQ=y
> > +# CONFIG_GENERIC_IRQ_DEBUGFS is not set
> > +
> > +CONFIG_GENERIC_TIME_VSYSCALL=y
> > +CONFIG_GENERIC_CLOCKEVENTS=y
> > +CONFIG_ARCH_HAS_TICK_BROADCAST=y
> > +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> > +CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
> > +CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
> > +CONFIG_CONTEXT_TRACKING=y
> > +CONFIG_CONTEXT_TRACKING_IDLE=y
> > +
> > +CONFIG_TICK_ONESHOT=y
> > +CONFIG_NO_HZ_COMMON=y
> > +# CONFIG_HZ_PERIODIC is not set
> > +CONFIG_NO_HZ_IDLE=y
> > +# CONFIG_NO_HZ_FULL is not set
> > +CONFIG_NO_HZ=y
> > +CONFIG_HIGH_RES_TIMERS=y
> > +# CONFIG_ARCH_BITMAIN is not set
> > +CONFIG_ARCH_DMA_ADDR_T_64BIT=y
> > +CONFIG_ARCH_FORCE_MAX_ORDER=11
> > +CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> > +# CONFIG_ARCH_IPQ40XX is not set
> > +# CONFIG_ARCH_IPQ5332 is not set
> > +# CONFIG_ARCH_IPQ6018 is not set
> > +CONFIG_ARCH_KEEP_MEMBLOCK=y
> > +# CONFIG_ARCH_MDM9615 is not set
> > +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
> > +# CONFIG_ARCH_MILBEAUT is not set
> > +CONFIG_ARCH_MMAP_RND_BITS=18
> > +CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
> > +# CONFIG_ARCH_MSM8909 is not set
> > +# CONFIG_ARCH_MSM8916 is not set
> > +# CONFIG_ARCH_MSM8960 is not set
> > +# CONFIG_ARCH_MSM8974 is not set
> > +# CONFIG_ARCH_MSM8X60 is not set
> > +CONFIG_ARCH_MULTIPLATFORM=y
> > +CONFIG_ARCH_MULTI_V6_V7=y
> > +CONFIG_ARCH_MULTI_V7=y
> > +CONFIG_ARCH_NR_GPIO=0
> > +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
> > +CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
> > +# CONFIG_ARCH_NXP is not set
> > +CONFIG_ARCH_QCOM=y
> > +CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> > +CONFIG_ARCH_SPARSEMEM_ENABLE=y
> > +CONFIG_ARCH_STACKWALK=y
> > +CONFIG_ARCH_SUSPEND_POSSIBLE=y
> > +CONFIG_ARCH_WANTS_NO_INSTR=y
> > +CONFIG_ARCH_WANTS_THP_SWAP=y
> > +CONFIG_ARM64=y
> > +CONFIG_ARM64_4K_PAGES=y
> > +CONFIG_ARM64_EPAN=y
> > +# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
> > +# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set
> > +# CONFIG_ARM64_CNP is not set
> > +# CONFIG_ARM64_ERRATUM_1742098 is not set
> > +# CONFIG_ARM64_ERRATUM_2051678 is not set
> > +# CONFIG_ARM64_ERRATUM_2054223 is not set
> > +# CONFIG_ARM64_ERRATUM_2067961 is not set
> > +# CONFIG_ARM64_ERRATUM_2077057 is not set
> > +# CONFIG_ARM64_ERRATUM_2441007 is not set
> > +# CONFIG_ARM64_ERRATUM_2441009 is not set
> > +# CONFIG_ARM64_ERRATUM_2658417 is not set
> > +# CONFIG_ARM64_PMEM is not set
> > +# CONFIG_ARM64_PSEUDO_NMI is not set
> > +CONFIG_COMPAT_32BIT_TIME=y
> > +CONFIG_ARM64_TAGGED_ADDR_ABI=y
> > +CONFIG_ARM_THUMB=y
> > +CONFIG_ARM_PATCH_IDIV=y
> > +CONFIG_ARM_PATCH_PHYS_VIRT=y
> > +CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
> > +# CONFIG_ARM_QCOM_SPM_CPUIDLE is not set
> > +# CONFIG_RELOCATABLE is not set
> > +# CONFIG_RANDOMIZE_BASE is not set
> > +# CONFIG_RANDOMIZE_MODULE_REGION_FULL is not set
> > +# CONFIG_RANDOMIZE_KSTACK_OFFSET is not set
> > +CONFIG_ARCH_NR_GPIO=0
> > +
> > +CONFIG_CMDLINE=""
> > +# CONFIG_EFI is not set
> > +#
> > +CONFIG_SUSPEND=y
> > +CONFIG_SUSPEND_FREEZER=y
> > +# CONFIG_SUSPEND_SKIP_SYNC is not set
> > +# CONFIG_HIBERNATION is not set
> > +CONFIG_PM_SLEEP=y
> > +CONFIG_PM_SLEEP_SMP=y
> > +# CONFIG_PM_AUTOSLEEP is not set
> > +# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
> > +# CONFIG_PM_WAKELOCKS is not set
> > +CONFIG_PM=y
> > +# CONFIG_PM_DEBUG is not set
> > +CONFIG_PM_CLK=y
> > +CONFIG_PM_GENERIC_DOMAINS=y
> > +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
> > +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
> > +CONFIG_PM_GENERIC_DOMAINS_OF=y
> > +# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
> > +CONFIG_ARM_PSCI=y
> > +CONFIG_ARM_PSCI_FW=y
> > +# CONFIG_ARM_SMMU is not set
> > +# CONFIG_ARM_SMMU_V3 is not set
> > +# CONFIG_QCOM_IOMMU is not set
> > +# CONFIG_VIRTIO_IOMMU is not set
> > +CONFIG_ATA=y
> > +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
> > +CONFIG_BLK_DEV_LOOP=y
> > +CONFIG_BLK_DEV_NVME=y
> > +CONFIG_BLK_DEV_RAM=y
> > +CONFIG_BLK_DEV_RAM_COUNT=16
> > +CONFIG_BLK_DEV_RAM_SIZE=4096
> > +CONFIG_BLK_INLINE_ENCRYPTION=y
> > +CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
> > +# CONFIG_VIRTIO_BLK is not set
> > +CONFIG_BMP280=y
> > +CONFIG_BMP280_I2C=y
> > +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
> > +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
> > +CONFIG_BOUNCE=y
> > +# CONFIG_BPF_KPROBE_OVERRIDE is not set
> > +# CONFIG_BPFILTER is not set
> > +CONFIG_BRIDGE_VLAN_FILTERING=y
> > +# CONFIG_BT_HCIBTUSB_MTK is not set
> > +# CONFIG_BT_MTKSDIO is not set
> > +CONFIG_BUILD_BIN2C=y
> > +# CONFIG_BUS_TOPOLOGY_ADHOC is not set
> > +# CONFIG_CACHE_L2X0 is not set
> > +# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
> > +# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
> > +CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> > +CONFIG_CC_STACKPROTECTOR=y
> > +# CONFIG_CC_STACKPROTECTOR_NONE is not set
> > +CONFIG_CC_STACKPROTECTOR_REGULAR=y
> > +CONFIG_CFG80211_HEADERS=y
> > +# CONFIG_CHARGER_LT3651 is not set
> > +# CONFIG_CHARGER_QCOM_SMBB is not set
> > +# CONFIG_CHARGER_UCS1002 is not set
> > +CONFIG_CLEANCACHE=y
> > +CONFIG_CLKDEV_LOOKUP=y
> > +CONFIG_CLKSRC_OF=y
> > +CONFIG_CLKSRC_PROBE=y
> > +CONFIG_CLKSRC_QCOM=y
> > +CONFIG_CLONE_BACKWARDS=y
> > +# CONFIG_CMA is not set
> > +# CONFIG_CMA_ALIGNMENT is not set
> > +# CONFIG_CMA_AREAS is not set
> > +# CONFIG_CMA_DEBUG is not set
> > +# CONFIG_CMA_DEBUGFS is not set
> > +# CONFIG_CMA_SIZE_MBYTES is not set
> > +# CONFIG_CMA_SIZE_SEL_MAX is not set
> > +# CONFIG_CMA_SIZE_SEL_MBYTES is not set
> > +# CONFIG_CMA_SIZE_SEL_MIN is not set
> > +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
> > +CONFIG_CNSS2=y
> > +CONFIG_CNSS2_QCA9574_SUPPORT=y
> > +# CONFIG_CNSS2_CALIBRATION_SUPPORT is not set
> > +# CONFIG_CNSS2_DEBUG is not set
> > +CONFIG_CNSS2_GENL=y
> > +# CONFIG_CNSS2_PCI_DRIVER is not set
> > +# CONFIG_CNSS2_PM is not set
> > +# CONFIG_CNSS2_RAMDUMP is not set
> > +# CONFIG_CNSS2_SMMU is not set
> > +CONFIG_CNSS_QCN9000=y
> > +# CONFIG_SURFACE_PLATFORMS is not set
> > +CONFIG_COMMON_CLK=y
> > +CONFIG_COMMON_CLK_QCOM=y
> > +# CONFIG_COMMON_CLK_XGENE is not set
> > +# CONFIG_COMMON_CLK_SI5341 is not set
> > +CONFIG_CONFIGFS_FS=y
> > +CONFIG_COREDUMP=y
> > +CONFIG_CORESIGHT=y
> > +# CONFIG_CORESIGHT_BYTE_CNTR is not set
> > +# CONFIG_CORESIGHT_CATU is not set
> > +# CONFIG_CORESIGHT_CPU_DEBUG is not set
> > +CONFIG_CORESIGHT_CSR=y
> > +CONFIG_CORESIGHT_CTI=y
> > +# CONFIG_CORESIGHT_CTI_INTEGRATION_REGS is not set
> > +# CONFIG_CORESIGHT_TRBE is not set
> > +# CONFIG_CORESIGHT_CTI_SAVE_DISABLE is not set
> > +# CONFIG_CORESIGHT_DUMMY is not set
> > +CONFIG_CORESIGHT_HWEVENT=y
> > +CONFIG_CORESIGHT_LINKS_AND_SINKS=y
> > +CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y
> > +# CONFIG_CORESIGHT_REMOTE_ETM is not set
> > +# CONFIG_CORESIGHT_SINK_ETBV10 is not set
> > +# CONFIG_CORESIGHT_SINK_TPIU is not set
> > +# CONFIG_CORESIGHT_SOURCE_ETM3X is not set
> > +CONFIG_CORESIGHT_SOURCE_ETM4X=y
> > +CONFIG_CORESIGHT_STM=y
> > +CONFIG_CORESIGHT_TPDA=y
> > +CONFIG_CORESIGHT_TPDM=y
> > +# CONFIG_CORESIGHT_TPDM_DEFAULT_ENABLE is not set
> > +# CONFIG_COUNTER is not set
> > +CONFIG_CPUFREQ_DT=y
> > +CONFIG_CPUFREQ_DT_PLATDEV=y
> > +CONFIG_CPU_32v6K=y
> > +CONFIG_CPU_32v7=y
> > +CONFIG_CPU_ABRT_EV7=y
> > +# CONFIG_CPU_BIG_ENDIAN is not set
> > +CONFIG_CPU_LITTLE_ENDIAN=y
> > +# CONFIG_SCHED_CLUSTER is not set
> > +# CONFIG_CPU_BPREDICT_DISABLE is not set
> > +CONFIG_CPU_CACHE_V7=y
> > +CONFIG_CPU_CACHE_VIPT=y
> > +CONFIG_CPU_COPY_V6=y
> > +CONFIG_CPU_CP15=y
> > +CONFIG_CPU_CP15_MMU=y
> > +CONFIG_CPU_FREQ=y
> > +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> > +CONFIG_CPU_FREQ_GOV_COMMON=y
> > +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> > +CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> > +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> > +CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> > +CONFIG_CPU_FREQ_GOV_USERSPACE=y
> > +CONFIG_CPU_FREQ_STAT=y
> > +CONFIG_CPU_HAS_ASID=y
> > +# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
> > +# CONFIG_CPU_ICACHE_DISABLE is not set
> > +# CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND is not set
> > +CONFIG_CPU_IDLE=y
> > +CONFIG_CPU_IDLE_GOV_LADDER=y
> > +CONFIG_CPU_IDLE_GOV_MENU=y
> > +# CONFIG_CPU_IDLE_GOV_TEO is not set
> > +CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
> > +CONFIG_CPU_PABRT_V7=y
> > +CONFIG_CPU_PM=y
> > +CONFIG_CPU_RMAP=y
> > +# CONFIG_CPU_SW_DOMAIN_PAN is not set
> > +# CONFIG_CPU_THERMAL is not set
> > +CONFIG_CPU_TLB_V7=y
> > +CONFIG_CPU_V7=y
> > +CONFIG_CRC16=y
> > +# CONFIG_CRC32_SARWATE is not set
> > +CONFIG_CRC32_SLICEBY8=y
> > +CONFIG_CROSS_MEMORY_ATTACH=y
> > +# CONFIG_CRYPTO_ADIANTUM is not set
> > +CONFIG_CRYPTO_AEAD=y
> > +CONFIG_CRYPTO_AEAD2=y
> > +CONFIG_CRYPTO_AES=y
> > +# CONFIG_CRYPTO_DISABLE_AES192_TEST is not set
> > +CONFIG_CRYPTO_AES_586=y
> > +# CONFIG_CRYPTO_ALL_CASES is not set
> > +CONFIG_CRYPTO_ARC4=y
> > +CONFIG_CRYPTO_BLKCIPHER=y
> > +CONFIG_CRYPTO_BLKCIPHER2=y
> > +CONFIG_CRYPTO_CBC=y
> > +CONFIG_CRYPTO_CCM=y
> > +CONFIG_CRYPTO_CMAC=y
> > +CONFIG_CRYPTO_CRC32C=y
> > +CONFIG_CRYPTO_CTR=y
> > +CONFIG_CRYPTO_DEFLATE=y
> > +CONFIG_CRYPTO_DES=y
> > +# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
> > +# CONFIG_CRYPTO_DEV_HISI_ZIP is not set
> > +# CONFIG_CRYPTO_DEV_OTA_CRYPTO is not set
> > +CONFIG_CRYPTO_DEV_QCOM_ICE=y
> > +# CONFIG_CRYPTO_DEV_QCOM_MSM_QCE is not set
> > +# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
> > +CONFIG_CRYPTO_DISABLE_AHASH_LARGE_KEY_TEST=y
> > +CONFIG_CRYPTO_DISABLE_AHASH_TYPE1_TESTS=y
> > +CONFIG_CRYPTO_DISABLE_AHASH_TYPE2_TESTS=y
> > +CONFIG_CRYPTO_DISABLE_AHASH_TYPE3_TESTS=y
> > +CONFIG_CRYPTO_DISABLE_AUTH_SPLIT_TESTS=y
> > +CONFIG_CRYPTO_DISABLE_HW_UNSUPPORTED_TESTS=y
> > +CONFIG_CRYPTO_DISABLE_OUTOFPLACE_TESTS=y
> > +CONFIG_CRYPTO_DRBG_HMAC=y
> > +CONFIG_CRYPTO_DRBG_MENU=y
> > +CONFIG_CRYPTO_ECB=y
> > +CONFIG_CRYPTO_ECHAINIV=y
> > +# CONFIG_CRYPTO_ECRDSA is not set
> > +# CONFIG_CRYPTO_ESSIV is not set
> > +CONFIG_CRYPTO_GCM=y
> > +CONFIG_CRYPTO_GF128MUL=y
> > +CONFIG_CRYPTO_GHASH=y
> > +CONFIG_CRYPTO_HASH=y
> > +CONFIG_CRYPTO_HASH2=y
> > +CONFIG_CRYPTO_HMAC=y
> > +CONFIG_CRYPTO_HW=y
> > +CONFIG_CRYPTO_JITTERENTROPY=y
> > +CONFIG_CRYPTO_KPP2=y
> > +CONFIG_CRYPTO_LIB_AES=y
> > +CONFIG_CRYPTO_LIB_SHA256=y
> > +CONFIG_CRYPTO_LIB_UTILS=y
> > +CONFIG_CRYPTO_LZO=y
> > +CONFIG_CRYPTO_MANAGER=y
> > +CONFIG_CRYPTO_MANAGER2=y
> > +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
> > +# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
> > +CONFIG_CRYPTO_MD5_PPC=y
> > +CONFIG_CRYPTO_MICHAEL_MIC=y
> > +CONFIG_CRYPTO_NO_AES_XTS_ZERO_KEY_SUPPORT=y
> > +CONFIG_CRYPTO_NO_AES_CTR_UNEVEN_DATA_LEN_SUPPORT=y
> > +# CONFIG_CRYPTO_NO_ZERO_LEN_HASH is not set
> > +CONFIG_CRYPTO_NULL=y
> > +CONFIG_CRYPTO_NULL2=y
> > +CONFIG_CRYPTO_OFB=y
> > +# CONFIG_CRYPTO_PCRYPT is not set
> > +# CONFIG_CRYPTO_POLYVAL_ARM64_CE is not set
> > +CONFIG_CRYPTO_RMD160=y
> > +CONFIG_CRYPTO_RNG=y
> > +CONFIG_CRYPTO_RNG2=y
> > +CONFIG_CRYPTO_RNG_DEFAULT=y
> > +CONFIG_CRYPTO_SEQIV=y
> > +CONFIG_CRYPTO_SHA1=y
> > +CONFIG_CRYPTO_SHA1_PPC=y
> > +CONFIG_CRYPTO_SHA256=y
> > +CONFIG_CRYPTO_SHA512=y
> > +# CONFIG_CRYPTO_SM3_NEON is not set
> > +# CONFIG_CRYPTO_SM4_ARM64_CE_BLK is not set
> > +# CONFIG_CRYPTO_SM4_ARM64_NEON_BLK is not set
> > +# CONFIG_CRYPTO_STREEBOG is not set
> > +CONFIG_CRYPTO_WORKQUEUE=y
> > +CONFIG_CRYPTO_XTS=y
> > +# CONFIG_CRYPTO_XXHASH is not set
> > +CONFIG_CRYPTO_XZ=y
> > +CONFIG_DCACHE_WORD_ACCESS=y
> > +CONFIG_DEBUG_BUGVERBOSE=y
> > +# CONFIG_DEBUG_EFI is not set
> > +CONFIG_DEBUG_GPIO=y
> > +# CONFIG_DEBUG_INFO_REDUCED is not set
> > +CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y
> > +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
> > +# CONFIG_DEBUG_MISC is not set
> > +# CONFIG_DEBUG_PLIST is not set
> > +# CONFIG_DEBUG_UART_8250 is not set
> > +# CONFIG_DEBUG_USER is not set
> > +CONFIG_DECOMPRESS_GZIP=y
> > +CONFIG_DEFAULT_SECURITY_DAC=y
> > +CONFIG_DEVMEM=y
> > +# CONFIG_DIAGFWD_BRIDGE_CODE is not set
> > +# CONFIG_DIAG_MHI is not set
> > +CONFIG_DIAG_OVER_QRTR=y
> > +# CONFIG_DIAG_OVER_USB is not set
> > +CONFIG_DMADEVICES=y
> > +# CONFIG_DMA_CMA is not set
> > +CONFIG_DMA_ENGINE=y
> > +CONFIG_DMA_OF=y
> > +# CONFIG_DMA_SOUND is not set
> > +CONFIG_DMA_VIRTUAL_CHANNELS=y
> > +# CONFIG_DMI is not set
> > +# CONFIG_DMIID is not set
> > +# CONFIG_DMI_SYSFS is not set
> > +# CONFIG_DM_INIT is not set
> > +# CONFIG_DP83640_PHY is not set
> > +# CONFIG_DPS310 is not set
> > +CONFIG_DTC=y
> > +CONFIG_DT_IDLE_STATES=y
> > +# CONFIG_DWMAC_GENERIC is not set
> > +CONFIG_DYNAMIC_DEBUG=y
> > +CONFIG_EDAC_ATOMIC_SCRUB=y
> > +CONFIG_EDAC_SUPPORT=y
> > +CONFIG_EXT4_FS=y
> > +CONFIG_FIXED_PHY=y
> > +CONFIG_FIX_EARLYCON_MEM=y
> > +CONFIG_FWNODE_MDIO=y
> > +CONFIG_FW_LOADER_PAGED_BUF=y
> > +# CONFIG_FW_CACHE is not set
> > +CONFIG_GENERIC_ALLOCATOR=y
> > +CONFIG_GENERIC_BUG=y
> > +CONFIG_GENERIC_CLOCKEVENTS=y
> > +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> > +# CONFIG_GENERIC_CPUFREQ_KRAIT is not set
> > +CONFIG_GENERIC_IDLE_POLL_SETUP=y
> > +CONFIG_GENERIC_IO=y
> > +CONFIG_GENERIC_IRQ_SHOW=y
> > +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
> > +CONFIG_GENERIC_ISA_DMA=y
> > +CONFIG_GENERIC_MSI_IRQ=y
> > +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
> > +CONFIG_GENERIC_PCI_IOMAP=y
> > +CONFIG_GENERIC_PHY=y
> > +CONFIG_GENERIC_PINCONF=y
> > +CONFIG_GENERIC_PINCTRL_GROUPS=y
> > +CONFIG_GENERIC_PINMUX_FUNCTIONS=y
> > +CONFIG_GENERIC_SCHED_CLOCK=y
> > +CONFIG_GENERIC_SMP_IDLE_THREAD=y
> > +CONFIG_GENERIC_STRNCPY_FROM_USER=y
> > +CONFIG_GENERIC_STRNLEN_USER=y
> > +CONFIG_GENERIC_TIME_VSYSCALL=y
> > +# CONFIG_GEN_RTC is not set
> > +# CONFIG_GLACIER is not set
> > +# CONFIG_GLINK_DEBUG_FS is not set
> > +CONFIG_GPIOLIB=y
> > +CONFIG_GPIOLIB_IRQCHIP=y
> > +# CONFIG_GPIO_AMD_FCH is not set
> > +# CONFIG_GPIO_CADENCE is not set
> > +CONFIG_GPIO_DEVRES=y
> > +# CONFIG_GPIO_GW_PLD is not set
> > +# CONFIG_GPIO_LATCH is not set
> > +# CONFIG_GPIO_NXP_74HC153 is not set
> > +# CONFIG_GPIO_SAMA5D2_PIOBU is not set
> > +CONFIG_GPIO_SYSFS=y
> > +# CONFIG_GPIO_USB_DETECT is not set
> > +# CONFIG_GSI is not set
> > +# CONFIG_HABANA_AI is not set
> > +CONFIG_HANDLE_DOMAIN_IRQ=y
> > +CONFIG_HARDEN_BRANCH_PREDICTOR=y
> > +CONFIG_HARDIRQS_SW_RESEND=y
> > +CONFIG_HAS_DMA=y
> > +CONFIG_HAS_IOMEM=y
> > +CONFIG_HAS_IOPORT_MAP=y
> > +CONFIG_HAVE_ARM_ARCH_TIMER=y
> > +CONFIG_HAVE_SMP=y
> > +CONFIG_HIGHMEM=y
> > +CONFIG_HIGHPTE=y
> > +# CONFIG_HIST_TRIGGERS is not set
> > +CONFIG_HOTPLUG_CPU=y
> > +CONFIG_HWSPINLOCK=y
> > +CONFIG_HWSPINLOCK_QCOM=y
> > +CONFIG_HW_RANDOM=y
> > +CONFIG_HW_RANDOM_MSM_LEGACY=y
> > +CONFIG_HW_RANDOM_CN10K=y
> > +CONFIG_HZ_FIXED=0
> > +CONFIG_I2C=y
> > +CONFIG_I2C_BOARDINFO=y
> > +CONFIG_I2C_CHARDEV=y
> > +CONFIG_I2C_COMPAT=y
> > +CONFIG_I2C_HELPER_AUTO=y
> > +# CONFIG_I2C_NVIDIA_GPU is not set
> > +# CONFIG_I2C_QCOM_CCI is not set
> > +CONFIG_I2C_QUP=y
> > +# CONFIG_I3C is not set
> > +# CONFIG_IGC is not set
> > +CONFIG_IIO=y
> > +# CONFIG_IIO_BUFFER is not set
> > +# CONFIG_IIO_TRIGGER is not set
> > +# CONFIG_ADMV8818 is not set
> > +# CONFIG_ADMV1014 is not set
> > +CONFIG_IKCONFIG=y
> > +CONFIG_IKCONFIG_PROC=y
> > +# CONFIG_IKHEADERS is not set
> > +CONFIG_INITRAMFS_SOURCE=""
> > +# CONFIG_RD_GZIP is not set
> > +# CONFIG_RD_BZIP2 is not set
> > +# CONFIG_RD_LZMA is not set
> > +# CONFIG_RD_XZ is not set
> > +# CONFIG_RD_LZO is not set
> > +# CONFIG_RD_LZ4 is not set
> > +# CONFIG_RD_ZSTD is not set
> > +# CONFIG_BOOT_CONFIG is not set
> > +# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
> > +# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
> > +CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> > +# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
> > +# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
> > +# CONFIG_INPUT_GPIO_VIBRA is not set
> > +# CONFIG_INPUT_MSM_VIBRATOR is not set
> > +# CONFIG_INPUT_PM8941_PWRKEY is not set
> > +# CONFIG_INPUT_PM8XXX_VIBRATOR is not set
> > +# CONFIG_INTERCONNECT is not set
> > +CONFIG_IOMMU_HELPER=y
> > +# CONFIG_IOMMU_DEBUGFS is not set
> > +# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
> > +# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
> > +# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
> > +# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
> > +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
> > +# CONFIG_IOMMU_IO_PGTABLE_DART is not set
> > +# CONFIG_OF_IOMMU is not set
> > +# CONFIG_IOMMU_DMA is not set
> > +# CONFIG_IOMMU_SUPPORT is not set
> > +# CONFIG_APQ_GCC_8084 is not set
> > +# CONFIG_APQ_MMCC_8084 is not set
> > +# CONFIG_IPQ_APSS_PLL is not set
> > +CONFIG_IPQ_APSS_6018=y
> > +CONFIG_IPQ_DEBUG=y
> > +# CONFIG_IPQ_GCC_4019 is not set
> > +# CONFIG_IPQ_GCC_5018 is not set
> > +# CONFIG_IPQ_GCC_5332 is not set
> > +# CONFIG_IPQ_GCC_6018 is not set
> > +# CONFIG_IPQ_GCC_806X is not set
> > +# CONFIG_IPQ_GCC_8074 is not set
> > +# CONFIG_IPQ_GCC_DEVSOC is not set
> > +CONFIG_IPQ_GCC_9574=y
> > +CONFIG_IPQ_NSSCC_9574=y
> > +# CONFIG_IPQ_LCC_806X is not set
> > +CONFIG_IPQ_REG_UPDATE=y
> > +# CONFIG_IPQ_REMOTEPROC_ADSP is not set
> > +CONFIG_IPQ_SUBSYSTEM_DUMP=y
> > +CONFIG_IPQ_SUBSYSTEM_RAMDUMP=y
> > +# CONFIG_IPQ_SUBSYSTEM_RESTART is not set
> > +# CONFIG_IPQ_SUBSYSTEM_RESTART_TEST is not set
> > +CONFIG_IPQ_TCSR=y
> > +CONFIG_IRQCHIP=y
> > +CONFIG_IRQ_DOMAIN=y
> > +CONFIG_IRQ_DOMAIN_HIERARCHY=y
> > +CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
> > +CONFIG_IRQ_FORCED_THREADING=y
> > +CONFIG_IRQ_TIME_ACCOUNTING=y
> > +CONFIG_IRQ_WORK=y
> > +CONFIG_JBD2=y
> > +# CONFIG_KCOV is not set
> > +CONFIG_KEYS=y
> > +# CONFIG_KEYS_REQUEST_CACHE is not set
> > +CONFIG_KPSS_XCC=y
> > +# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
> > +# CONFIG_KRAITCC is not set
> > +# CONFIG_KRAIT_CLOCKS is not set
> > +# CONFIG_KRAIT_L2_ACCESSORS is not set
> > +# CONFIG_LCD_CLASS_DEVICE is not set
> > +CONFIG_LEDS_IPQ=y
> > +# CONFIG_LEDS_LM3532 is not set
> > +# CONFIG_LEDS_PCA9956B is not set
> > +CONFIG_LEDS_TLC591XX=y
> > +# CONFIG_LEDS_TRIGGER_AUDIO is not set
> > +# CONFIG_LEDS_TRIGGER_PATTERN is not set
> > +# CONFIG_LEDS_PWM_MULTICOLOR is not set
> > +CONFIG_LIBFDT=y
> > +CONFIG_LOCKUP_DETECTOR=y
> > +# CONFIG_LOCK_EVENT_COUNTS is not set
> > +CONFIG_LOCK_SPIN_ON_OWNER=y
> > +CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"
> > +# CONFIG_LTC1660 is not set
> > +CONFIG_LZO_COMPRESS=y
> > +CONFIG_LZO_DECOMPRESS=y
> > +CONFIG_MAILBOX=y
> > +# CONFIG_MAILBOX_TEST is not set
> > +# CONFIG_MAP_E_SUPPORT is not set
> > +# CONFIG_MAX31856 is not set
> > +# CONFIG_MAX44009 is not set
> > +# CONFIG_MAX5432 is not set
> > +# CONFIG_MB1232 is not set
> > +# CONFIG_MCP3911 is not set
> > +# CONFIG_MCP41010 is not set
> > +CONFIG_MDIO=y
> > +CONFIG_MDIO_BITBANG=y
> > +CONFIG_MDIO_BOARDINFO=y
> > +# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
> > +CONFIG_MDIO_GPIO=y
> > +CONFIG_MDIO_QCA=y
> > +# CONFIG_MDM_GCC_9615 is not set
> > +# CONFIG_MDM_LCC_9615 is not set
> > +# CONFIG_MEMORY_HOTPLUG is not set
> > +# CONFIG_MFD_LOCHNAGAR is not set
> > +# CONFIG_MFD_MAX77650 is not set
> > +CONFIG_MFD_QCOM_RPM=y
> > +# CONFIG_MFD_SPMI_PMIC is not set
> > +CONFIG_MFD_SYSCON=y
> > +# CONFIG_MFD_TQMX86 is not set
> > +CONFIG_MHI_BUS=y
> > +CONFIG_MHI_BUS_DEBUG=y
> > +# CONFIG_MHI_BUS_RESERVED_DMA_POOL is not set
> > +CONFIG_MHI_NETDEV=y
> > +CONFIG_MHI_QTI=y
> > +# CONFIG_MHI_SATELLITE is not set
> > +CONFIG_MHI_UCI=y
> > +CONFIG_MHI_WWAN_CTRL=y
> > +CONFIG_MHI_BUS_PCI_GENERIC=y
> > +CONFIG_MIGHT_HAVE_CACHE_L2X0=y
> > +CONFIG_MIGRATION=y
> > +CONFIG_MMC=y
> > +CONFIG_MMC_ARMMMCI=y
> > +CONFIG_MMC_BLOCK=y
> > +CONFIG_MMC_BLOCK_MINORS=32
> > +CONFIG_MMC_CRYPTO=y
> > +CONFIG_MMC_QCOM_DML=y
> > +CONFIG_MMC_SDHCI=y
> > +CONFIG_MMC_SDHCI_IO_ACCESSORS=y
> > +CONFIG_MMC_SDHCI_MSM=y
> > +CONFIG_MMC_SDHCI_MSM_ICE=y
> > +# CONFIG_MMC_SDHCI_OF_ARASAN is not set
> > +# CONFIG_MMC_SDHCI_OF_ASPEED is not set
> > +# CONFIG_MMC_SDHCI_PCI is not set
> > +CONFIG_MMC_SDHCI_PLTFM=y
> > +# CONFIG_MMC_STM32_SDMMC is not set
> > +# CONFIG_MMC_TIFM_SD is not set
> > +CONFIG_MODULES_TREE_LOOKUP=y
> > +CONFIG_MODULES_USE_ELF_REL=y
> > +# CONFIG_MSM_GCC_8660 is not set
> > +# CONFIG_MSM_GCC_8909 is not set
> > +# CONFIG_MSM_GCC_8916 is not set
> > +# CONFIG_MSM_GCC_8939 is not set
> > +# CONFIG_MSM_GCC_8960 is not set
> > +# CONFIG_MSM_GCC_8974 is not set
> > +# CONFIG_MSM_GCC_8976 is not set
> > +# CONFIG_MSM_GCC_8994 is not set
> > +# CONFIG_MSM_GCC_8996 is not set
> > +# CONFIG_MSM_GCC_8998 is not set
> > +# CONFIG_MSM_GPUCC_8998 is not set
> > +# CONFIG_MSM_IOMMU is not set
> > +# CONFIG_MSM_LCC_8960 is not set
> > +# CONFIG_MSM_MHI is not set
> > +# CONFIG_MSM_MHI_DEBUG is not set
> > +# CONFIG_MSM_MHI_DEV is not set
> > +# CONFIG_MSM_MHI_UCI is not set
> > +# CONFIG_MSM_MMCC_8960 is not set
> > +# CONFIG_MSM_MMCC_8974 is not set
> > +# CONFIG_MSM_MMCC_8996 is not set
> > +# CONFIG_MSM_QMI_INTERFACE is not set
> > +# CONFIG_MSM_RPM_GLINK is not set
> > +CONFIG_MSM_RPM_LOG=y
> > +CONFIG_MSM_RPM_RPMSG=y
> > +# CONFIG_MSM_RPM_SMD is not set
> > +# CONFIG_MSM_SECURE_BUFFER is not set
> > +# CONFIG_MSM_SMEM is not set
> > +# CONFIG_MSM_TEST_QMI_CLIENT is not set
> > +# CONFIG_MSM_MMCC_8998 is not set
> > +# CONFIG_QCM_GCC_2290 is not set
> > +# CONFIG_QCM_DISPCC_2290 is not set
> > +# CONFIG_MTD_SPLIT_BCM_WFI_FW is not set
> > +CONFIG_MTD_CMDLINE_PARTS=y
> > +# CONFIG_MTD_HYPERBUS is not set
> > +CONFIG_MTD_M25P80=y
> > +# CONFIG_MTD_NAND_ECC_SW_BCH is not set
> > +# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
> > +CONFIG_MTD_NAND_QCOM=y
> > +# CONFIG_MTD_NAND_QCOM_SERIAL is not set
> > +# CONFIG_MTD_QCOMSMEM_PARTS is not set
> > +CONFIG_MTD_RAW_NAND=y
> > +# CONFIG_MTD_ROUTERBOOT_PARTS is not set
> > +CONFIG_MTD_SPINAND_GIGADEVICE=y
> > +CONFIG_MTD_SPINAND_MT29F=y
> > +CONFIG_MTD_SPINAND_ONDIEECC=y
> > +CONFIG_MTD_SPI_NOR=y
> > +# CONFIG_MTD_SPLIT_ELF_FW is not set
> > +CONFIG_MTD_SPLIT_FIRMWARE=y
> > +CONFIG_MTD_SPLIT_FIT_FW=y
> > +CONFIG_MTD_UBI=y
> > +CONFIG_MTD_UBI_BEB_LIMIT=20
> > +CONFIG_MTD_UBI_BLOCK=y
> > +# CONFIG_MTD_UBI_FASTMAP is not set
> > +CONFIG_MTD_UBI_GLUEBI=y
> > +CONFIG_MTD_UBI_WL_THRESHOLD=4096
> > +CONFIG_MULTI_IRQ_HANDLER=y
> > +CONFIG_MUTEX_SPIN_ON_OWNER=y
> > +CONFIG_NEED_DMA_MAP_STATE=y
> > +CONFIG_NEON=y
> > +CONFIG_NET=y
> > +# CONFIG_VIRTIO_NET is not set
> > +# CONFIG_NET_DSA_MV88E6063 is not set
> > +CONFIG_NET_FLOW_LIMIT=y
> > +CONFIG_NET_L3_MASTER_DEV=y
> > +CONFIG_NET_PTP_CLASSIFY=y
> > +# CONFIG_NET_SCH_TAPRIO is not set
> > +CONFIG_NET_SWITCHDEV=y
> > +# CONFIG_NET_VENDOR_GOOGLE is not set
> > +# CONFIG_NET_VENDOR_PENSANDO is not set
> > +# CONFIG_NF_CONNTRACK_DSCPREMARK_EXT is not set
> > +# CONFIG_NF_IPV6_DUMMY_HEADER is not set
> > +# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
> > +# CONFIG_NOA1305 is not set
> > +CONFIG_NO_BOOTMEM=y
> > +CONFIG_NO_HZ=y
> > +CONFIG_NO_HZ_COMMON=y
> > +CONFIG_NO_HZ_IDLE=y
> > +CONFIG_NR_CPUS=4
> > +# CONFIG_NULL_TTY is not set
> > +# CONFIG_NUMA is not set
> > +CONFIG_NUM_ALT_PARTITION=16
> > +CONFIG_NVME_HWMON=y
> > +CONFIG_NVMEM=y
> > +# CONFIG_NVMEM_SYSFS is not set
> > +CONFIG_NVMEM_QCOM_QFPROM=y
> > +# CONFIG_NVMEM_RMEM is not set
> > +# CONFIG_NVMEM_U_BOOT_ENV is not set
> > +# CONFIG_OCTEONTX2_AF is not set
> > +# CONFIG_OCTEON_EP is not set
> > +CONFIG_OF=y
> > +CONFIG_OF_ADDRESS=y
> > +CONFIG_OF_ADDRESS_PCI=y
> > +CONFIG_OF_EARLY_FLATTREE=y
> > +CONFIG_OF_FLATTREE=y
> > +CONFIG_OF_GPIO=y
> > +CONFIG_OF_IRQ=y
> > +CONFIG_OF_KOBJ=y
> > +CONFIG_OF_MDIO=y
> > +CONFIG_OF_MTD=y
> > +CONFIG_OF_NET=y
> > +CONFIG_OF_PCI=y
> > +CONFIG_OF_PCI_IRQ=y
> > +CONFIG_OF_RESERVED_MEM=y
> > +# CONFIG_OF_SLIMBUS is not set
> > +CONFIG_OLD_SIGACTION=y
> > +CONFIG_OLD_SIGSUSPEND3=y
> > +CONFIG_PADATA=y
> > +CONFIG_PAGE_OFFSET=0xC0000000
> > +# CONFIG_PAGE_TABLE_CHECK is not set
> > +CONFIG_PANIC_ON_OOPS=y
> > +CONFIG_PANIC_ON_OOPS_VALUE=1
> > +CONFIG_PANIC_TIMEOUT=5
> > +CONFIG_PCI=y
> > +# CONFIG_PCIEAER is not set
> > +# CONFIG_PCIE_AL is not set
> > +# CONFIG_PCIE_CADENCE_EP is not set
> > +CONFIG_PCIE_DW=y
> > +# CONFIG_PCIE_DW_PLAT is not set
> > +# CONFIG_PCIE_PME is not set
> > +CONFIG_PCIE_QCOM=y
> > +CONFIG_PCI_DOMAINS=y
> > +CONFIG_PCI_DOMAINS_GENERIC=y
> > +CONFIG_PCI_MSI=y
> > +CONFIG_PCI_MSI_IRQ_DOMAIN=y
> > +CONFIG_PCS_XPCS=y
> > +CONFIG_PERF_USE_VMALLOC=y
> > +CONFIG_PGTABLE_LEVELS=2
> > +CONFIG_PHYLIB=y
> > +CONFIG_PHYLINK=y
> > +CONFIG_PHY_IPQ_UNIPHY_PCIE=y
> > +CONFIG_PHYS_OFFSET=0x40000000
> > +# CONFIG_PHY_QCOM_APQ8064_SATA is not set
> > +# CONFIG_PHY_QCOM_EDP is not set
> > +# CONFIG_PHY_QCOM_IPQ4019_USB is not set
> > +# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
> > +# CONFIG_PHY_QCOM_IPQ806X_USB is not set
> > +# CONFIG_PHY_QCOM_PCIE2 is not set
> > +CONFIG_PHY_QCOM_QMP=y
> > +# CONFIG_PHY_QCOM_QUSB2 is not set
> > +# CONFIG_PHY_QCOM_UFS is not set
> > +# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
> > +# CONFIG_PHY_QCOM_USB_HS_28NM is not set
> > +# CONFIG_PHY_QCOM_USB_SS is not set
> > +CONFIG_PINCTRL=y
> > +# CONFIG_PINCTRL_APQ8064 is not set
> > +# CONFIG_PINCTRL_APQ8084 is not set
> > +# CONFIG_PINCTRL_DEVSOC is not set
> > +# CONFIG_PINCTRL_IPQ4019 is not set
> > +# CONFIG_PINCTRL_IPQ5018 is not set
> > +# CONFIG_PINCTRL_IPQ5332 is not set
> > +# CONFIG_PINCTRL_IPQ6018 is not set
> > +# CONFIG_PINCTRL_IPQ8064 is not set
> > +# CONFIG_PINCTRL_IPQ8074 is not set
> > +CONFIG_PINCTRL_IPQ9574=y
> > +# CONFIG_PINCTRL_MDM9615 is not set
> > +CONFIG_PINCTRL_MSM=y
> > +# CONFIG_PINCTRL_MSM8226 is not set
> > +# CONFIG_PINCTRL_MSM8660 is not set
> > +# CONFIG_PINCTRL_MSM8909 is not set
> > +# CONFIG_PINCTRL_MSM8916 is not set
> > +# CONFIG_PINCTRL_MSM8960 is not set
> > +# CONFIG_PINCTRL_MSM8976 is not set
> > +# CONFIG_PINCTRL_MSM8994 is not set
> > +# CONFIG_PINCTRL_MSM8996 is not set
> > +# CONFIG_PINCTRL_MSM8998 is not set
> > +# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
> > +# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
> > +# CONFIG_PINCTRL_QCM2290 is not set
> > +# CONFIG_PINCTRL_QCS404 is not set
> > +# CONFIG_PINCTRL_SC7180 is not set
> > +# CONFIG_PINCTRL_SC8280XP is not set
> > +# CONFIG_PINCTRL_SDM660 is not set
> > +# CONFIG_PINCTRL_SDM845 is not set
> > +# CONFIG_PINCTRL_SDX65 is not set
> > +# CONFIG_PINCTRL_SM8150 is not set
> > +# CONFIG_PINCTRL_SM6350 is not set
> > +# CONFIG_PINCTRL_SM6375 is not set
> > +# CONFIG_PINCTRL_SM8250 is not set
> > +# CONFIG_PINCTRL_SM8450 is not set
> > +# CONFIG_PINCTRL_STMFX is not set
> > +# CONFIG_PKCS7_TEST_KEY is not set
> > +# CONFIG_PKCS7_MESSAGE_PARSER is not set
> > +# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
> > +# CONFIG_PL330_DMA is not set
> > +CONFIG_PM=y
> > +# CONFIG_PM8916_WATCHDOG is not set
> > +CONFIG_PM_CLK=y
> > +# CONFIG_PM_DEBUG is not set
> > +CONFIG_PM_GENERIC_DOMAINS=y
> > +CONFIG_PM_GENERIC_DOMAINS_OF=y
> > +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
> > +CONFIG_PM_OPP=y
> > +CONFIG_PM_SLEEP=y
> > +CONFIG_PM_SLEEP_SMP=y
> > +CONFIG_POWER_RESET=y
> > +CONFIG_POWER_RESET_MSM=y
> > +CONFIG_POWER_SUPPLY=y
> > +CONFIG_PPS=y
> > +CONFIG_PREEMPT=y
> > +CONFIG_PREEMPT_COUNT=y
> > +# CONFIG_PREEMPT_DYNAMIC is not set
> > +# CONFIG_PREEMPT_NONE is not set
> > +CONFIG_PREEMPT_RCU=y
> > +# CONFIG_COMPAT_ALIGNMENT_FIXUPS is not set
> > +# CONFIG_PRINTK_CALLER is not set
> > +CONFIG_PRINTK_TIME=y
> > +CONFIG_PROC_PAGE_MONITOR=y
> > +# CONFIG_PROC_STRIPPED is not set
> > +# CONFIG_PSI is not set
> > +CONFIG_PTP_1588_CLOCK=y
> > +CONFIG_PUBLIC_KEY_ALGO_RSA=y
> > +# CONFIG_PVPANIC is not set
> > +CONFIG_PWM=y
> > +CONFIG_PWM_IPQ=y
> > +# CONFIG_PWM_PCA9685 is not set
> > +CONFIG_PWM_SYSFS=y
> > +# CONFIG_PWM_CLK is not set
> > +# CONFIG_PWM_XILINX is not set
> > +# CONFIG_PWRSEQ_EMMC is not set
> > +CONFIG_PWRSEQ_IPQ=y
> > +# CONFIG_PWRSEQ_SIMPLE is not set
> > +CONFIG_QCA_MINIDUMP=y
> > +# CONFIG_QCA_MINIDUMP_DEBUG is not set
> > +# CONFIG_QCOM_A53PLL is not set
> > +CONFIG_QCOM_ADM=y
> > +# CONFIG_QCOM_AOSS_QMP is not set
> > +CONFIG_QCOM_APCS_IPC=y
> > +CONFIG_QCOM_APM=y
> > +# CONFIG_QCOM_MPM is not set
> > +# CONFIG_QCOM_IPCC is not set
> > +# CONFIG_QCOM_APR is not set
> > +CONFIG_QCOM_BAM_DMA=y
> > +CONFIG_QCOM_CACHE_DUMP=y
> > +CONFIG_QCOM_CACHE_DUMP_ON_PANIC=y
> > +# CONFIG_QCOM_CPR is not set
> > +# CONFIG_QCOM_OCMEM is not set
> > +# CONFIG_QCOM_SPM is not set
> > +# CONFIG_QCOM_STATS is not set
> > +# CONFIG_QCOM_WCNSS_CTRL is not set
> > +# CONFIG_QCOM_ICC_BWMON is not set
> > +# CONFIG_QCOM_CLK_APCS_MSM8916 is not set
> > +# CONFIG_QCOM_CLK_APCC_MSM8996 is not set
> > +# CONFIG_QCOM_CLK_APCS_SDX55 is not set
> > +# CONFIG_QCOM_CLK_RPM is not set
> > +# CONFIG_QCOM_CLK_SMD_RPM is not set
> > +# CONFIG_QCOM_COINCELL is not set
> > +# CONFIG_QCOM_COMMAND_DB is not set
> > +CONFIG_QCOM_DLOAD_MODE=y
> > +CONFIG_QCOM_DLOAD_MODE_APPSBL=y
> > +# CONFIG_QCOM_EBI2 is not set
> > +# CONFIG_QCOM_FASTRPC is not set
> > +CONFIG_QCOM_GDSC=y
> > +# CONFIG_QCOM_GENI_SE is not set
> > +CONFIG_QCOM_GLINK_SSR=y
> > +# CONFIG_QCOM_GSBI is not set
> > +# CONFIG_QCOM_HFPLL is not set
> > +# CONFIG_QCOM_LLCC is not set
> > +# CONFIG_QCOM_NON_SECURE_PIL is not set
> > +CONFIG_QCOM_Q6V5_MPD=y
> > +# CONFIG_QCOM_PDC is not set
> > +# CONFIG_QCOM_PM is not set
> > +# CONFIG_QCOM_Q6V5_ADSP is not set
> > +# CONFIG_QCOM_Q6V5_MSS is not set
> > +# CONFIG_QCOM_Q6V5_PAS is not set
> > +# CONFIG_QCOM_Q6V5_WCSS is not set
> > +CONFIG_QCOM_QFPROM=y
> > +CONFIG_QCOM_QMI_HELPERS=y
> > +CONFIG_QCOM_RESTART_REASON=y
> > +# CONFIG_QCOM_RMTFS_MEM is not set
> > +# CONFIG_QCOM_RPMH is not set
> > +# CONFIG_QCOM_RPMPD is not set
> > +CONFIG_QCOM_RPM_CLK=y
> > +# CONFIG_QCOM_RTB is not set
> > +CONFIG_QCOM_SCM=y
> > +CONFIG_QCOM_SCM_32=y
> > +CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT=y
> > +# CONFIG_QCOM_SMD is not set
> > +CONFIG_QCOM_SMD_RPM=y
> > +CONFIG_QCOM_SMEM=y
> > +CONFIG_QCOM_SMEM_STATE=y
> > +CONFIG_QCOM_SMP2P=y
> > +# CONFIG_QCOM_SMSM is not set
> > +CONFIG_QCOM_SOC_NETSTANDBY=y
> > +CONFIG_QCOM_SOCINFO=y
> > +# CONFIG_QCOM_SPMI_ADC5 is not set
> > +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
> > +# CONFIG_QCOM_SPMI_VADC is not set
> > +CONFIG_QCOM_SYSMON=y
> > +CONFIG_QCOM_TSENS=y
> > +CONFIG_QCOM_WDT=y
> > +CONFIG_QCOM_DCC_V2=y
> > +# CONFIG_QCS_GCC_404 is not set
> > +# CONFIG_QCS_Q6SSTOP_404 is not set
> > +# CONFIG_QCS_TURING_404 is not set
> > +# CONFIG_HP_WATCHDOG is not set
> > +CONFIG_RAS=y
> > +CONFIG_RATIONAL=y
> > +CONFIG_RCU_CPU_STALL_TIMEOUT=21
> > +# CONFIG_RCU_EXPERT is not set
> > +CONFIG_RCU_STALL_COMMON=y
> > +# CONFIG_REED_SOLOMON_TEST is not set
> > +CONFIG_REGMAP=y
> > +CONFIG_REGMAP_ALLOW_WRITE_DEBUGFS=y
> > +CONFIG_REGMAP_MMIO=y
> > +CONFIG_REGULATOR=y
> > +CONFIG_REGULATOR_CPR3=y
> > +CONFIG_REGULATOR_CPR3_NPU=y
> > +CONFIG_REGULATOR_CPR4_APSS=y
> > +CONFIG_REGULATOR_FIXED_VOLTAGE=y
> > +CONFIG_REGULATOR_GPIO=y
> > +# CONFIG_REGULATOR_IPQ40XX is not set
> > +# CONFIG_REGULATOR_QCOM_RPM is not set
> > +CONFIG_REGULATOR_QCOM_SMD_RPM=y
> > +# CONFIG_REGULATOR_QCOM_SPMI is not set
> > +CONFIG_REGULATOR_QTI_GPIO=y
> > +CONFIG_REGULATOR_RPM_GLINK=y
> > +# CONFIG_REGULATOR_RPM_SMD is not set
> > +# CONFIG_REGULATOR_VQMMC_IPQ4019 is not set
> > +CONFIG_RELAY=y
> > +CONFIG_REMOTEPROC=y
> > +# CONFIG_REMOTEPROC_CDEV is not set
> > +# CONFIG_RESET_ATTACK_MITIGATION is not set
> > +CONFIG_RESET_CONTROLLER=y
> > +# CONFIG_RESET_QCOM_AOSS is not set
> > +# CONFIG_RESET_QCOM_PDC is not set
> > +# CONFIG_QCOM_WCNSS_PIL is not set
> > +CONFIG_QRTR=y
> > +CONFIG_QRTR_MHI=y
> > +CONFIG_QRTR_SMD=y
> > +CONFIG_RFS_ACCEL=y
> > +# CONFIG_RODATA_FULL_DEFAULT_ENABLED is not set
> > +CONFIG_RPMSG=y
> > +CONFIG_RPMSG_CHAR=y
> > +# CONFIG_RPMSG_CTRL is not set
> > +# CONFIG_RPMSG_NS is not set
> > +CONFIG_RPMSG_QCOM_GLINK_RPM=y
> > +CONFIG_RPMSG_QCOM_GLINK_SMEM=y
> > +CONFIG_RPMSG_QCOM_SMD=y
> > +# CONFIG_RPMSG_TTY is not set
> > +# CONFIG_RPMSG_VIRTIO is not set
> > +CONFIG_RPS=y
> > +CONFIG_RTC_CLASS=y
> > +# CONFIG_RTC_DRV_CMOS is not set
> > +# CONFIG_RTC_DRV_PM8XXX is not set
> > +CONFIG_RWSEM_SPIN_ON_OWNER=y
> > +CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> > +CONFIG_SAMPLES=y
> > +# CONFIG_SAMPLE_AUXDISPLAY is not set
> > +# CONFIG_SAMPLE_CONFIGFS is not set
> > +# CONFIG_SAMPLE_HW_BREAKPOINT is not set
> > +# CONFIG_SAMPLE_KFIFO is not set
> > +# CONFIG_SAMPLE_KOBJECT is not set
> > +# CONFIG_SAMPLE_KPROBES is not set
> > +# CONFIG_SAMPLE_KRETPROBES is not set
> > +# CONFIG_SAMPLE_WATCHDOG is not set
> > +# CONFIG_SAMPLE_CORESIGHT_SYSCFG is not set
> > +CONFIG_SAMPLE_QMI_CLIENT=m
> > +# CONFIG_SAMPLE_RPMSG_CLIENT is not set
> > +# CONFIG_SAMPLE_TRACE_ARRAY is not set
> > +# CONFIG_SAMPLE_TRACE_CUSTOM_EVENTS is not set
> > +CONFIG_SAMPLE_TRACE_EVENTS=y
> > +# CONFIG_SAMPLE_TRACE_PRINTK is not set
> > +# CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB is not set
> > +# CONFIG_SATA_AHCI is not set
> > +CONFIG_SCHED_HRTICK=y
> > +# CONFIG_SCHED_INFO is not set
> > +# CONFIG_SC_DISPCC_7180 is not set
> > +# CONFIG_SC_MSS_7180 is not set
> > +# CONFIG_SC_VIDEOCC_7180 is not set
> > +# CONFIG_SC_CAMCC_7280 is not set
> > +# CONFIG_SC_DISPCC_7280 is not set
> > +# CONFIG_SC_GCC_7180 is not set
> > +# CONFIG_SC_GCC_8280XP is not set
> > +# CONFIG_SC_GPUCC_7180 is not set
> > +# CONFIG_SC_LPASSCC_7280 is not set
> > +# CONFIG_SC_LPASS_CORECC_7180 is not set
> > +# CONFIG_SC_LPASS_CORECC_7280 is not set
> > +CONFIG_UACCE=y
> > +# CONFIG_SCSI is not set
> > +# CONFIG_SCSI_DMA is not set
> > +# CONFIG_SCSI_MYRS is not set
> > +CONFIG_SCSI_SCAN_ASYNC=y
> > +# CONFIG_SDM_CAMCC_845 is not set
> > +# CONFIG_SDM_DISPCC_845 is not set
> > +# CONFIG_SDM_GCC_660 is not set
> > +# CONFIG_SDM_GCC_845 is not set
> > +# CONFIG_SDM_GPUCC_845 is not set
> > +# CONFIG_SDM_LPASSCC_845 is not set
> > +# CONFIG_SDM_VIDEOCC_845 is not set
> > +# CONFIG_SDX_GCC_65 is not set
> > +# CONFIG_SEEMP_CORE is not set
> > +# CONFIG_SENSIRION_SGP30 is not set
> > +# CONFIG_SENSORS_DRIVETEMP is not set
> > +# CONFIG_SENSORS_OCC_P8_I2C is not set
> > +# CONFIG_SENSORS_RM3100_I2C is not set
> > +# CONFIG_SENSORS_RM3100_SPI is not set
> > +# CONFIG_SERIAL_8250 is not set
> > +# CONFIG_SERIAL_8250_CONSOLE is not set
> > +# CONFIG_SERIAL_8250_DMA is not set
> > +# CONFIG_SERIAL_AMBA_PL010 is not set
> > +# CONFIG_SERIAL_AMBA_PL011 is not set
> > +# CONFIG_SERIAL_FSL_LINFLEXUART is not set
> > +CONFIG_SERIAL_MSM=y
> > +CONFIG_SERIAL_MSM_CONSOLE=y
> > +# CONFIG_SERIAL_SIFIVE is not set
> > +# CONFIG_SHADOW_CALL_STACK is not set
> > +# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
> > +CONFIG_SKB_RECYCLER=y
> > +CONFIG_SKB_RECYCLER_MULTI_CPU=y
> > +# CONFIG_SKB_RECYCLER_PREALLOC is not set
> > +# CONFIG_SLIMBUS is not set
> > +# CONFIG_SLIMBUS_MSM_CTRL is not set
> > +# CONFIG_SLIMBUS_MSM_NGD is not set
> > +CONFIG_SMP=y
> > +CONFIG_SMP_ON_UP=y
> > +# CONFIG_SM_CAMCC_8450 is not set
> > +# CONFIG_SM_GCC_8150 is not set
> > +# CONFIG_SM_GCC_8250 is not set
> > +# CONFIG_SM_GCC_8450 is not set
> > +# CONFIG_SM_GPUCC_6350 is not set
> > +# CONFIG_SM_GPUCC_8150 is not set
> > +# CONFIG_SM_GPUCC_8250 is not set
> > +# CONFIG_SM_GPUCC_8350 is not set
> > +# CONFIG_SM_VIDEOCC_8150 is not set
> > +# CONFIG_SM_VIDEOCC_8250 is not set
> > +CONFIG_SOUND=y
> > +# CONFIG_SND_SOC_APQ8016_SBC is not set
> > +# CONFIG_SND_SOC_SC7180 is not set
> > +CONFIG_SND=y
> > +CONFIG_SND_SOC=y
> > +CONFIG_SND_SOC_IPQ=y
> > +CONFIG_SND_SOC_IPQ9574_LPASS_PCM_RAW=y
> > +CONFIG_SND_SOC_IPQ_LPASS=y
> > +CONFIG_SND_SOC_QCOM=y
> > +CONFIG_SOCK_RX_QUEUE_MAPPING=y
> > +CONFIG_SOFTIRQ_ON_OWN_STACK=y
> > +CONFIG_SPARSEMEM=y
> > +CONFIG_SPARSEMEM_EXTREME=y
> > +CONFIG_SPARSEMEM_VMEMMAP=y
> > +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> > +CONFIG_SPARSE_IRQ=y
> > +CONFIG_SPI=y
> > +CONFIG_SPI_MASTER=y
> > +CONFIG_SPI_MEM=y
> > +# CONFIG_SPI_MTK_QUADSPI is not set
> > +# CONFIG_SPI_QCOM_QSPI is not set
> > +CONFIG_SPI_QUP=y
> > +CONFIG_SPI_SPIDEV=y
> > +# CONFIG_SPI_VSC7385 is not set
> > +# CONFIG_SPMI is not set
> > +# CONFIG_SPMI_MSM_PMIC_ARB is not set
> > +# CONFIG_SPMI_PMIC_CLKDIV is not set
> > +CONFIG_SPS=y
> > +# CONFIG_SPS30 is not set
> > +# CONFIG_SPS_SUPPORT_BAMDMA is not set
> > +CONFIG_SPS_SUPPORT_NDP_BAM=y
> > +CONFIG_SRCU=y
> > +# CONFIG_SRD_TRACE is not set
> > +# CONFIG_STAGING is not set
> > +# CONFIG_STM_PROTO_BASIC is not set
> > +# CONFIG_STM_PROTO_SYS_T is not set
> > +# CONFIG_STM_SOURCE_FTRACE is not set
> > +# CONFIG_STM_SOURCE_HEARTBEAT is not set
> > +# CONFIG_STOPWATCH is not set
> > +# CONFIG_STRIP_ASM_SYMS is not set
> > +# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
> > +# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
> > +CONFIG_SUSPEND=y
> > +# CONFIG_SWAP is not set
> > +CONFIG_SWCONFIG=y
> > +CONFIG_SWIOTLB=y
> > +CONFIG_SWP_EMULATE=y
> > +# CONFIG_SW_SYNC is not set
> > +# CONFIG_SYNC is not set
> > +CONFIG_INET_TABLE_PERTURB_ORDER=16
> > +CONFIG_SYS_SUPPORTS_APM_EMULATION=y
> > +# CONFIG_TEST_BLACKHOLE_DEV is not set
> > +# CONFIG_TEST_DYNAMIC_DEBUG is not set
> > +# CONFIG_TEST_MEMCAT_P is not set
> > +# CONFIG_TEST_MEMINIT is not set
> > +# CONFIG_TEST_STACKINIT is not set
> > +# CONFIG_TEST_STRSCPY is not set
> > +# CONFIG_TEST_VMALLOC is not set
> > +# CONFIG_TEST_XARRAY is not set
> > +# CONFIG_TEST_MAPLE_TREE is not set
> > +# CONFIG_NVME_MULTIPATH is not set
> > +# CONFIG_ARM_MHU_V2 is not set
> > +# CONFIG_HISI_PCIE_PMU is not set
> > +# CONFIG_HNS3_PMU is not set
> > +# CONFIG_HISI_PTT is not set
> > +# CONFIG_ETM4X_IMPDEF_FEATURE is not set
> > +CONFIG_THERMAL=y
> > +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
> > +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
> > +CONFIG_THERMAL_GOV_STEP_WISE=y
> > +CONFIG_THERMAL_GOV_USER_SPACE=y
> > +CONFIG_THERMAL_HWMON=y
> > +CONFIG_THERMAL_OF=y
> > +CONFIG_THERMAL_WRITABLE_TRIPS=y
> > +# CONFIG_THUMB2_KERNEL is not set
> > +# CONFIG_TICK_CPU_ACCOUNTING is not set
> > +# CONFIG_TI_ADS124S08 is not set
> > +# CONFIG_TI_ADS8344 is not set
> > +# CONFIG_TI_CPSW_PHY_SEL is not set
> > +# CONFIG_TI_DAC7311 is not set
> > +# CONFIG_TI_DAC7612 is not set
> > +CONFIG_TRACING_EVENTS_GPIO=y
> > +# CONFIG_TRUSTED_FOUNDATIONS is not set
> > +CONFIG_UBIFS_FS=y
> > +CONFIG_UBIFS_FS_ADVANCED_COMPR=y
> > +CONFIG_UBIFS_FS_LZO=y
> > +CONFIG_UBIFS_FS_XATTR=y
> > +CONFIG_UBIFS_FS_XZ=y
> > +CONFIG_UBIFS_FS_ZLIB=y
> > +# CONFIG_UBIFS_FS_ZSTD is not set
> > +CONFIG_UEVENT_HELPER_PATH=""
> > +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
> > +# CONFIG_UNICODE is not set
> > +CONFIG_UNINLINE_SPIN_UNLOCK=y
> > +# CONFIG_UNMAP_KERNEL_AT_EL0 is not set
> > +CONFIG_UNWINDER_ARM=y
> > +# CONFIG_UNWINDER_FRAME_POINTER is not set
> > +# CONFIG_USB_BAM is not set
> > +CONFIG_USB_CONFIGFS=y
> > +# CONFIG_USB_CONFIGFS_ACM is not set
> > +# CONFIG_USB_CONFIGFS_ECM is not set
> > +# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
> > +# CONFIG_USB_CONFIGFS_EEM is not set
> > +# CONFIG_USB_CONFIGFS_F_DIAG is not set
> > +# CONFIG_USB_CONFIGFS_F_FS is not set
> > +# CONFIG_USB_CONFIGFS_F_HID is not set
> > +# CONFIG_USB_CONFIGFS_F_LB_SS is not set
> > +# CONFIG_USB_CONFIGFS_F_MIDI is not set
> > +# CONFIG_USB_CONFIGFS_F_PRINTER is not set
> > +# CONFIG_USB_CONFIGFS_F_QDSS is not set
> > +# CONFIG_USB_CONFIGFS_F_UAC1 is not set
> > +# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set
> > +# CONFIG_USB_CONFIGFS_F_UAC2 is not set
> > +# CONFIG_USB_CONFIGFS_MASS_STORAGE is not set
> > +# CONFIG_USB_CONFIGFS_NCM is not set
> > +# CONFIG_USB_CONFIGFS_OBEX is not set
> > +# CONFIG_USB_CONFIGFS_RNDIS is not set
> > +# CONFIG_USB_CONFIGFS_SERIAL is not set
> > +# CONFIG_USB_CONN_GPIO is not set
> > +# CONFIG_USB_DWC3_OF_SIMPLE is not set
> > +# CONFIG_USB_EHCI_FSL is not set
> > +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
> > +# CONFIG_USB_EHCI_TT_NEWSCHED is not set
> > +# CONFIG_USB_GADGET is not set
> > +# CONFIG_USB_NET_AQC111 is not set
> > +# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
> > +# CONFIG_USB_QCA_M31_PHY is not set
> > +# CONFIG_USB_QCOM_8X16_PHY is not set
> > +# CONFIG_USB_QCOM_QMP_PHY is not set
> > +# CONFIG_USB_QCOM_QUSB_PHY is not set
> > +CONFIG_USB_SUPPORT=y
> > +CONFIG_USE_OF=y
> > +# CONFIG_U_SERIAL_CONSOLE is not set
> > +# CONFIG_VALIDATE_FS_PARSER is not set
> > +# CONFIG_VCNL4035 is not set
> > +CONFIG_VDSO=y
> > +CONFIG_VECTORS_BASE=0xffff0000
> > +# CONFIG_VFIO is not set
> > +CONFIG_VFP=y
> > +CONFIG_VFPv3=y
> > +# CONFIG_VMWARE_VMCI is not set
> > +CONFIG_WATCHDOG_CORE=y
> > +CONFIG_WATCHDOG_OPEN_TIMEOUT=0
> > +# CONFIG_WL_TI is not set
> > +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
> > +CONFIG_WWAN=y
> > +# CONFIG_WWAN_DEBUGFS is not set
> > +CONFIG_X509_CERTIFICATE_PARSER=y
> > +# CONFIG_XILINX_SDFEC is not set
> > +# CONFIG_XILINX_XADC is not set
> > +CONFIG_XPS=y
> > +CONFIG_XZ_DEC_ARM=y
> > +CONFIG_XZ_DEC_BCJ=y
> > +CONFIG_ZBOOT_ROM_BSS=0
> > +CONFIG_ZBOOT_ROM_TEXT=0
> > +CONFIG_ZLIB_DEFLATE=y
> > +CONFIG_ZLIB_INFLATE=y
> > +CONFIG_ZONE_DMA32=y
> > +CONFIG_ZSTD_COMMON=y
> > +CONFIG_ZSTD_COMPRESS=y
> > +CONFIG_ZSTD_DECOMPRESS=y
> > +CONFIG_AQUANTIA_PHY=y
> > +CONFIG_AT803X_PHY=y
> > +CONFIG_MDIO_IPQ4019=y
> > +CONFIG_QTI_TZ_LOG=y
> > +CONFIG_QTI_LICENSE_MANAGER=y
> > +# CONFIG_VIRT_WIFI is not set
> > +# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
> > +# CONFIG_QTI_APSS_ACC is not set
> > +# CONFIG_DEBUG_MEM_USAGE is not set
> > +# CONFIG_SLAB_FREELIST_HARDENED is not set
> > +# CONFIG_SLAB_FREELIST_RANDOM is not set
> > +# CONFIG_ARM64_MODULE_PLTS is not set
> > +# CONFIG_SCHED_STACK_END_CHECK is not set
> > +# CONFIG_SYMBOLIC_ERRNAME is not set
> > +# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
> > +# CONFIG_LEDS_CLASS_MULTICOLOR is not set
> > +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
> > +# CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not set
> > +# CONFIG_PINCTRL_SINGLE is not set
> > +# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
> > +# CONFIG_RANDOM_TRUST_CPU is not set
> > +# CONFIG_ADVISE_SYSCALLS is not set
> > +# CONFIG_AIO is not set
> > +# CONFIG_ARM64_TAGGED_ADDR_ABI is not set
> > +# CONFIG_BLK_DEV_THROTTLING is not set
> > +# CONFIG_BPF_JIT is not set
> > +# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
> > +# CONFIG_CGROUP_BPF is not set
> > +# CONFIG_CGROUP_RDMA is not set
> > +# CONFIG_CRC8 is not set
> > +# CONFIG_DAX is not set
> > +# CONFIG_EXT4_USE_FOR_EXT2 is not set
> > +# CONFIG_FANOTIFY is not set
> > +# CONFIG_FHANDLE is not set
> > +# CONFIG_IO_URING is not set
> > +# CONFIG_IP_PIMSM_V1 is not set
> > +# CONFIG_IP_PIMSM_V2 is not set
> > +# CONFIG_RAS is not set
> > +# CONFIG_SECCOMP is not set
> > +# CONFIG_SND_PROC_FS is not set
> > +# CONFIG_OPTIMIZE_INLINING is not set
> > diff --git a/target/linux/ipq95xx/generic/config-default b/target/linux/ipq95xx/generic/config-default
> > new file mode 100644
> > index 0000000000..a81cec0635
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/generic/config-default
> > @@ -0,0 +1,70 @@
> > +# CONFIG_32BIT is not set
> > +CONFIG_64BIT=y
> > +# CONFIG_ACPI is not set
> > +# CONFIG_ARCH_BCM_IPROC is not set
> > +# CONFIG_ARCH_EXYNOS7 is not set
> > +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> > +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
> > +# CONFIG_ARCH_LAYERSCAPE is not set
> > +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
> > +# CONFIG_ARCH_SEATTLE is not set
> > +CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> > +CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> > +CONFIG_ARCH_SPARSEMEM_ENABLE=y
> > +# CONFIG_ARCH_SPRD is not set
> > +# CONFIG_ARCH_STRATIX10 is not set
> > +# CONFIG_ARCH_THUNDER is not set
> > +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
> > +CONFIG_ARCH_WANT_FRAME_POINTERS=y
> > +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
> > +# CONFIG_ARCH_XGENE is not set
> > +# CONFIG_ARCH_ZYNQMP is not set
> > +CONFIG_ARM64=y
> > +# CONFIG_ARM64_16K_PAGES is not set
> > +CONFIG_ARM64_4K_PAGES=y
> > +# CONFIG_ARM64_64K_PAGES is not set
> > +# CONFIG_ARM64_CRYPTO is not set
> > +# CONFIG_ARM64_ERRATUM_819472 is not set
> > +# CONFIG_ARM64_ERRATUM_824069 is not set
> > +# CONFIG_ARM64_ERRATUM_826319 is not set
> > +# CONFIG_ARM64_ERRATUM_827319 is not set
> > +# CONFIG_ARM64_ERRATUM_832075 is not set
> > +# CONFIG_ARM64_ERRATUM_843419 is not set
> > +# CONFIG_ARM64_ERRATUM_845719 is not set
> > +CONFIG_ARM64_HW_AFDBM=y
> > +# CONFIG_ARM64_LSE_ATOMICS is not set
> > +CONFIG_ARM64_PAN=y
> > +# CONFIG_ARM64_PTDUMP is not set
> > +# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
> > +CONFIG_ARM64_VA_BITS=39
> > +CONFIG_ARM64_VA_BITS_39=y
> > +# CONFIG_ARM64_VA_BITS_48 is not set
> > +# CONFIG_ARMV8_DEPRECATED is not set
> > +# CONFIG_CAVIUM_ERRATUM_22375 is not set
> > +# CONFIG_CAVIUM_ERRATUM_23154 is not set
> > +# CONFIG_CAVIUM_ERRATUM_27456 is not set
> > +# CONFIG_COMMON_CLK_VERSATILE is not set
> > +CONFIG_COMMON_CLK_XGENE=y
> > +CONFIG_COMPAT=y
> > +CONFIG_COMPAT_BINFMT_ELF=y
> > +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
> > +# CONFIG_DEBUG_ALIGN_RODATA is not set
> > +CONFIG_FRAME_WARN=2048
> > +# CONFIG_GPIO_XGENE is not set
> > +# CONFIG_HUGETLBFS is not set
> > +# CONFIG_I2C_CADENCE is not set
> > +# CONFIG_KASAN is not set
> > +# CONFIG_KVM is not set
> > +# CONFIG_NET_VENDOR_CAVIUM is not set
> > +# CONFIG_PCI_HISI is not set
> > +CONFIG_PHYS_ADDR_T_64BIT=y
> > +# CONFIG_PHY_XGENE is not set
> > +# CONFIG_POWER_RESET_XGENE is not set
> > +CONFIG_QCOM_SCM_64=y
> > +# CONFIG_RTC_DRV_EFI is not set
> > +CONFIG_SPARSEMEM=y
> > +CONFIG_SPARSEMEM_EXTREME=y
> > +CONFIG_SPARSEMEM_MANUAL=y
> > +CONFIG_SPARSEMEM_VMEMMAP=y
> > +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> > +CONFIG_VIRTUALIZATION=y
> > diff --git a/target/linux/ipq95xx/generic/target.mk b/target/linux/ipq95xx/generic/target.mk
> > new file mode 100644
> > index 0000000000..9de98feff4
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/generic/target.mk
> > @@ -0,0 +1,8 @@
> > +
> > +SUBTARGET:=generic
> > +BOARDNAME:=QTI IPQ95xx(64bit) based boards
> > +CPU_TYPE:=cortex-a73
> > +
> > +define Target/Description
> > + Build images for IPQ95xx 64 bit system.
> > +endef
> > diff --git a/target/linux/ipq95xx/image/Makefile b/target/linux/ipq95xx/image/Makefile
> > new file mode 100644
> > index 0000000000..3989e31139
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/image/Makefile
> > @@ -0,0 +1,35 @@
> > +include $(TOPDIR)/rules.mk
> > +include $(INCLUDE_DIR)/image.mk
> > +
> > +define Device/Default
> > + PROFILES := Default
> > + DTS_DIR := $(LINUX_DIR)/arch/$(LINUX_KARCH)/boot/dts/$(if $(CONFIG_TARGET_ipq95xx_generic),qcom)
> > + KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
> > + KERNEL_LOADADDR := 0x40000000
> > + DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
> > + DEVICE_DTS_CONFIG := config-1
> > + IMAGES := sysupgrade.bin
> > + IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
> > + IMAGE/sysupgrade.bin/squashfs :=
> > +endef
> > +
> > +define Device/FitImage
> > + KERNEL_SUFFIX := -fit-uImage.itb
> > + KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
> > + KERNEL_NAME := Image
> > +endef
> > +
> > +define Device/FitImageLzma
> > + KERNEL_SUFFIX := -fit-uImage.itb
> > + KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
> > + KERNEL_NAME := Image
> > +endef
> > +
> > +include generic.mk
> > +
> > +define Image/Build
> > + $(call Image/Build/$(1),$(1))
> > + dd if=$(KDIR)/root$(2).$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1)-root$(3).img bs=2k conv=sync
> > +endef
> > +
> > +$(eval $(call BuildImage))
> > diff --git a/target/linux/ipq95xx/image/generic.mk b/target/linux/ipq95xx/image/generic.mk
> > new file mode 100644
> > index 0000000000..e341ea9e55
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/image/generic.mk
> > @@ -0,0 +1,14 @@
> > +define Device/qcom_rdp433
> > + $(call Device/FitImageLzma)
> > + DEVICE_VENDOR := Qualcomm Technologies, Inc.
> > + DEVICE_MODEL := RDP433
> > + DEVICE_VARIANT := AP-AL02-C4
> > + BOARD_NAME := ap-al02.1-c4
> > + BUILD_DTS_ipq9574-rdp433 := 1
> > + SOC := ipq9574
> > + KERNEL_INSTALL := 1
> > + KERNEL_SIZE := 6096k
> > + IMAGE_SIZE := 25344k
> > + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
> > +endef
> > +TARGET_DEVICES += qcom_rdp433
> > diff --git a/target/linux/ipq95xx/patches-6.1/0001-soc-qcom-smd-rpm-Add-IPQ9574-compatible.patch b/target/linux/ipq95xx/patches-6.1/0001-soc-qcom-smd-rpm-Add-IPQ9574-compatible.patch
> > new file mode 100644
> > index 0000000000..81b7f4ba7b
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0001-soc-qcom-smd-rpm-Add-IPQ9574-compatible.patch
> > @@ -0,0 +1,32 @@
> > +From d86de60f5e324034e1e917881ff0b46f2f9f00e7 Mon Sep 17 00:00:00 2001
> > +From: devi priya <quic_devipriy at quicinc.com>
> > +Date: Fri, 13 Jan 2023 20:33:05 +0530
> > +Subject: [PATCH 01/41] soc: qcom: smd-rpm: Add IPQ9574 compatible
> > +
> > +Adding compatible string to support RPM communication over SMD for
> > +IPQ9574 SoC
> > +
> > +Co-developed-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> > +Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> > +Signed-off-by: devi priya <quic_devipriy at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230113150310.29709-2-quic_devipriy@quicinc.com
> > +---
> > + drivers/soc/qcom/smd-rpm.c | 1 +
> > + 1 file changed, 1 insertion(+)
> > +
> > +diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
> > +index 413f9f4ae9cd..10765775ee17 100644
> > +--- a/drivers/soc/qcom/smd-rpm.c
> > ++++ b/drivers/soc/qcom/smd-rpm.c
> > +@@ -233,6 +233,7 @@ static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev)
> > + static const struct of_device_id qcom_smd_rpm_of_match[] = {
> > + { .compatible = "qcom,rpm-apq8084" },
> > + { .compatible = "qcom,rpm-ipq6018" },
> > ++ { .compatible = "qcom,rpm-ipq9574" },
> > + { .compatible = "qcom,rpm-msm8226" },
> > + { .compatible = "qcom,rpm-msm8909" },
> > + { .compatible = "qcom,rpm-msm8916" },
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0002-clk-qcom-apss-ipq-pll-refactor-the-driver-to-accommo.patch b/target/linux/ipq95xx/patches-6.1/0002-clk-qcom-apss-ipq-pll-refactor-the-driver-to-accommo.patch
> > new file mode 100644
> > index 0000000000..20ed093577
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0002-clk-qcom-apss-ipq-pll-refactor-the-driver-to-accommo.patch
> > @@ -0,0 +1,127 @@
> > +From 19cd9f8fc024ba70659411f00fd8c4f4a3814647 Mon Sep 17 00:00:00 2001
> > +From: Kathiravan T <quic_kathirav at quicinc.com>
> > +Date: Fri, 17 Feb 2023 14:03:04 +0530
> > +Subject: [PATCH 02/41] clk: qcom: apss-ipq-pll: refactor the driver to
> > + accommodate different PLL types
> > +
> > +APSS PLL found on the IPQ8074 and IPQ6018 are of type Huayra PLL. But,
> > +IPQ5332 APSS PLL is of type Stromer Plus. To accommodate both these PLLs,
> > +refactor the driver to take the clk_alpha_pll, alpha_pll_config via driver
> > +data.
> > +
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Signed-off-by: Kathiravan T <quic_kathirav at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230217083308.12017-2-quic_kathirav@quicinc.com
> > +---
> > + drivers/clk/qcom/apss-ipq-pll.c | 60 ++++++++++++++++++++++-----------
> > + 1 file changed, 41 insertions(+), 19 deletions(-)
> > +
> > +diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
> > +index a5aea27eb867..4f2a147e9fb2 100644
> > +--- a/drivers/clk/qcom/apss-ipq-pll.c
> > ++++ b/drivers/clk/qcom/apss-ipq-pll.c
> > +@@ -8,20 +8,27 @@
> > +
> > + #include "clk-alpha-pll.h"
> > +
> > +-static const u8 ipq_pll_offsets[] = {
> > +- [PLL_OFF_L_VAL] = 0x08,
> > +- [PLL_OFF_ALPHA_VAL] = 0x10,
> > +- [PLL_OFF_USER_CTL] = 0x18,
> > +- [PLL_OFF_CONFIG_CTL] = 0x20,
> > +- [PLL_OFF_CONFIG_CTL_U] = 0x24,
> > +- [PLL_OFF_STATUS] = 0x28,
> > +- [PLL_OFF_TEST_CTL] = 0x30,
> > +- [PLL_OFF_TEST_CTL_U] = 0x34,
> > ++/*
> > ++ * Even though APSS PLL type is of existing one (like Huayra), its offsets
> > ++ * are different from the one mentioned in the clk-alpha-pll.c, since the
> > ++ * PLL is specific to APSS, so lets the define the same.
> > ++ */
> > ++static const u8 ipq_pll_offsets[][PLL_OFF_MAX_REGS] = {
> > ++ [CLK_ALPHA_PLL_TYPE_HUAYRA] = {
> > ++ [PLL_OFF_L_VAL] = 0x08,
> > ++ [PLL_OFF_ALPHA_VAL] = 0x10,
> > ++ [PLL_OFF_USER_CTL] = 0x18,
> > ++ [PLL_OFF_CONFIG_CTL] = 0x20,
> > ++ [PLL_OFF_CONFIG_CTL_U] = 0x24,
> > ++ [PLL_OFF_STATUS] = 0x28,
> > ++ [PLL_OFF_TEST_CTL] = 0x30,
> > ++ [PLL_OFF_TEST_CTL_U] = 0x34,
> > ++ },
> > + };
> > +
> > +-static struct clk_alpha_pll ipq_pll = {
> > ++static struct clk_alpha_pll ipq_pll_huayra = {
> > + .offset = 0x0,
> > +- .regs = ipq_pll_offsets,
> > ++ .regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_HUAYRA],
> > + .flags = SUPPORTS_DYNAMIC_UPDATE,
> > + .clkr = {
> > + .enable_reg = 0x0,
> > +@@ -61,6 +68,21 @@ static const struct alpha_pll_config ipq8074_pll_config = {
> > + .test_ctl_hi_val = 0x4000,
> > + };
> > +
> > ++struct apss_pll_data {
> > ++ struct clk_alpha_pll *pll;
> > ++ const struct alpha_pll_config *pll_config;
> > ++};
> > ++
> > ++static struct apss_pll_data ipq8074_pll_data = {
> > ++ .pll = &ipq_pll_huayra,
> > ++ .pll_config = &ipq8074_pll_config,
> > ++};
> > ++
> > ++static struct apss_pll_data ipq6018_pll_data = {
> > ++ .pll = &ipq_pll_huayra,
> > ++ .pll_config = &ipq6018_pll_config,
> > ++};
> > ++
> > + static const struct regmap_config ipq_pll_regmap_config = {
> > + .reg_bits = 32,
> > + .reg_stride = 4,
> > +@@ -71,7 +93,7 @@ static const struct regmap_config ipq_pll_regmap_config = {
> > +
> > + static int apss_ipq_pll_probe(struct platform_device *pdev)
> > + {
> > +- const struct alpha_pll_config *ipq_pll_config;
> > ++ const struct apss_pll_data *data;
> > + struct device *dev = &pdev->dev;
> > + struct regmap *regmap;
> > + void __iomem *base;
> > +@@ -85,23 +107,23 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
> > + if (IS_ERR(regmap))
> > + return PTR_ERR(regmap);
> > +
> > +- ipq_pll_config = of_device_get_match_data(&pdev->dev);
> > +- if (!ipq_pll_config)
> > ++ data = of_device_get_match_data(&pdev->dev);
> > ++ if (!data)
> > + return -ENODEV;
> > +
> > +- clk_alpha_pll_configure(&ipq_pll, regmap, ipq_pll_config);
> > ++ clk_alpha_pll_configure(data->pll, regmap, data->pll_config);
> > +
> > +- ret = devm_clk_register_regmap(dev, &ipq_pll.clkr);
> > ++ ret = devm_clk_register_regmap(dev, &data->pll->clkr);
> > + if (ret)
> > + return ret;
> > +
> > + return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> > +- &ipq_pll.clkr.hw);
> > ++ &data->pll->clkr.hw);
> > + }
> > +
> > + static const struct of_device_id apss_ipq_pll_match_table[] = {
> > +- { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_config },
> > +- { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_config },
> > ++ { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_data },
> > ++ { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_data },
> > + { }
> > + };
> > + MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0003-clk-qcom-clk-alpha-pll-Add-support-for-Stromer-PLLs.patch b/target/linux/ipq95xx/patches-6.1/0003-clk-qcom-clk-alpha-pll-Add-support-for-Stromer-PLLs.patch
> > new file mode 100644
> > index 0000000000..2e84493af1
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0003-clk-qcom-clk-alpha-pll-Add-support-for-Stromer-PLLs.patch
> > @@ -0,0 +1,229 @@
> > +From 5bd9fcb9c152a9ed0c9bb22e403d4df359faad7b Mon Sep 17 00:00:00 2001
> > +From: Varadarajan Narayanan <quic_varada at quicinc.com>
> > +Date: Tue, 7 Mar 2023 11:52:24 +0530
> > +Subject: [PATCH 03/41] clk: qcom: clk-alpha-pll: Add support for Stromer PLLs
> > +
> > +Add programming sequence support for managing the Stromer
> > +PLLs.
> > +
> > +Reviewed-by: Stephen Boyd <sboyd at kernel.org>
> > +Co-developed-by: Sricharan R <quic_srichara at quicinc.com>
> > +Signed-off-by: Sricharan R <quic_srichara at quicinc.com>
> > +Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> > +Signed-off-by: Kathiravan T <quic_kathirav at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230307062232.4889-2-quic_kathirav@quicinc.com
> > +---
> > + drivers/clk/qcom/clk-alpha-pll.c | 128 ++++++++++++++++++++++++++++++-
> > + drivers/clk/qcom/clk-alpha-pll.h | 13 +++-
> > + 2 files changed, 139 insertions(+), 2 deletions(-)
> > +
> > +diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> > +index 1973d79c9465..8e5e7a26bcc4 100644
> > +--- a/drivers/clk/qcom/clk-alpha-pll.c
> > ++++ b/drivers/clk/qcom/clk-alpha-pll.c
> > +@@ -1,7 +1,7 @@
> > + // SPDX-License-Identifier: GPL-2.0
> > + /*
> > + * Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved.
> > +- * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
> > ++ * Copyright (c) 2021, 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> > + */
> > +
> > + #include <linux/kernel.h>
> > +@@ -188,6 +188,18 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
> > + [PLL_OFF_CONFIG_CTL] = 0x1C,
> > + [PLL_OFF_STATUS] = 0x20,
> > + },
> > ++ [CLK_ALPHA_PLL_TYPE_STROMER] = {
> > ++ [PLL_OFF_L_VAL] = 0x08,
> > ++ [PLL_OFF_ALPHA_VAL] = 0x10,
> > ++ [PLL_OFF_ALPHA_VAL_U] = 0x14,
> > ++ [PLL_OFF_USER_CTL] = 0x18,
> > ++ [PLL_OFF_USER_CTL_U] = 0x1c,
> > ++ [PLL_OFF_CONFIG_CTL] = 0x20,
> > ++ [PLL_OFF_CONFIG_CTL_U] = 0xff,
> > ++ [PLL_OFF_TEST_CTL] = 0x30,
> > ++ [PLL_OFF_TEST_CTL_U] = 0x34,
> > ++ [PLL_OFF_STATUS] = 0x28,
> > ++ },
> > + };
> > + EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
> > +
> > +@@ -199,6 +211,8 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
> > + #define ALPHA_BITWIDTH 32U
> > + #define ALPHA_SHIFT(w) min(w, ALPHA_BITWIDTH)
> > +
> > ++#define ALPHA_PLL_STATUS_REG_SHIFT 8
> > ++
> > + #define PLL_HUAYRA_M_WIDTH 8
> > + #define PLL_HUAYRA_M_SHIFT 8
> > + #define PLL_HUAYRA_M_MASK 0xff
> > +@@ -2308,3 +2322,115 @@ const struct clk_ops clk_alpha_pll_rivian_evo_ops = {
> > + .round_rate = clk_rivian_evo_pll_round_rate,
> > + };
> > + EXPORT_SYMBOL_GPL(clk_alpha_pll_rivian_evo_ops);
> > ++
> > ++void clk_stromer_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> > ++ const struct alpha_pll_config *config)
> > ++{
> > ++ u32 val, val_u, mask, mask_u;
> > ++
> > ++ regmap_write(regmap, PLL_L_VAL(pll), config->l);
> > ++ regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
> > ++ regmap_write(regmap, PLL_CONFIG_CTL(pll), config->config_ctl_val);
> > ++
> > ++ if (pll_has_64bit_config(pll))
> > ++ regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
> > ++ config->config_ctl_hi_val);
> > ++
> > ++ if (pll_alpha_width(pll) > 32)
> > ++ regmap_write(regmap, PLL_ALPHA_VAL_U(pll), config->alpha_hi);
> > ++
> > ++ val = config->main_output_mask;
> > ++ val |= config->aux_output_mask;
> > ++ val |= config->aux2_output_mask;
> > ++ val |= config->early_output_mask;
> > ++ val |= config->pre_div_val;
> > ++ val |= config->post_div_val;
> > ++ val |= config->vco_val;
> > ++ val |= config->alpha_en_mask;
> > ++ val |= config->alpha_mode_mask;
> > ++
> > ++ mask = config->main_output_mask;
> > ++ mask |= config->aux_output_mask;
> > ++ mask |= config->aux2_output_mask;
> > ++ mask |= config->early_output_mask;
> > ++ mask |= config->pre_div_mask;
> > ++ mask |= config->post_div_mask;
> > ++ mask |= config->vco_mask;
> > ++ mask |= config->alpha_en_mask;
> > ++ mask |= config->alpha_mode_mask;
> > ++
> > ++ regmap_update_bits(regmap, PLL_USER_CTL(pll), mask, val);
> > ++
> > ++ /* Stromer APSS PLL does not enable LOCK_DET by default, so enable it */
> > ++ val_u = config->status_val << ALPHA_PLL_STATUS_REG_SHIFT;
> > ++ val_u |= config->lock_det;
> > ++
> > ++ mask_u = config->status_mask;
> > ++ mask_u |= config->lock_det;
> > ++
> > ++ regmap_update_bits(regmap, PLL_USER_CTL_U(pll), mask_u, val_u);
> > ++ regmap_write(regmap, PLL_TEST_CTL(pll), config->test_ctl_val);
> > ++ regmap_write(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val);
> > ++
> > ++ if (pll->flags & SUPPORTS_FSM_MODE)
> > ++ qcom_pll_set_fsm_mode(regmap, PLL_MODE(pll), 6, 0);
> > ++}
> > ++EXPORT_SYMBOL_GPL(clk_stromer_pll_configure);
> > ++
> > ++static int clk_alpha_pll_stromer_determine_rate(struct clk_hw *hw,
> > ++ struct clk_rate_request *req)
> > ++{
> > ++ u32 l;
> > ++ u64 a;
> > ++
> > ++ req->rate = alpha_pll_round_rate(req->rate, req->best_parent_rate,
> > ++ &l, &a, ALPHA_REG_BITWIDTH);
> > ++
> > ++ return 0;
> > ++}
> > ++
> > ++static int clk_alpha_pll_stromer_set_rate(struct clk_hw *hw, unsigned long rate,
> > ++ unsigned long prate)
> > ++{
> > ++ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> > ++ int ret;
> > ++ u32 l;
> > ++ u64 a;
> > ++
> > ++ rate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_BITWIDTH);
> > ++
> > ++ regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
> > ++ regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
> > ++ regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll),
> > ++ a >> ALPHA_BITWIDTH);
> > ++
> > ++ regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
> > ++ PLL_ALPHA_EN, PLL_ALPHA_EN);
> > ++
> > ++ if (!clk_hw_is_enabled(hw))
> > ++ return 0;
> > ++
> > ++ /*
> > ++ * Stromer PLL supports Dynamic programming.
> > ++ * It allows the PLL frequency to be changed on-the-fly without first
> > ++ * execution of a shutdown procedure followed by a bring up procedure.
> > ++ */
> > ++ regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_UPDATE,
> > ++ PLL_UPDATE);
> > ++
> > ++ ret = wait_for_pll_update(pll);
> > ++ if (ret)
> > ++ return ret;
> > ++
> > ++ return wait_for_pll_enable_lock(pll);
> > ++}
> > ++
> > ++const struct clk_ops clk_alpha_pll_stromer_ops = {
> > ++ .enable = clk_alpha_pll_enable,
> > ++ .disable = clk_alpha_pll_disable,
> > ++ .is_enabled = clk_alpha_pll_is_enabled,
> > ++ .recalc_rate = clk_alpha_pll_recalc_rate,
> > ++ .determine_rate = clk_alpha_pll_stromer_determine_rate,
> > ++ .set_rate = clk_alpha_pll_stromer_set_rate,
> > ++};
> > ++EXPORT_SYMBOL_GPL(clk_alpha_pll_stromer_ops);
> > +diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
> > +index f9524b3fce6b..51d4043c7e4f 100644
> > +--- a/drivers/clk/qcom/clk-alpha-pll.h
> > ++++ b/drivers/clk/qcom/clk-alpha-pll.h
> > +@@ -1,5 +1,9 @@
> > + /* SPDX-License-Identifier: GPL-2.0 */
> > +-/* Copyright (c) 2015, 2018, The Linux Foundation. All rights reserved. */
> > ++/*
> > ++ * Copyright (c) 2015, 2018, 2021 The Linux Foundation. All rights reserved.
> > ++ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> > ++ */
> > ++
> > +
> > + #ifndef __QCOM_CLK_ALPHA_PLL_H__
> > + #define __QCOM_CLK_ALPHA_PLL_H__
> > +@@ -21,6 +25,7 @@ enum {
> > + CLK_ALPHA_PLL_TYPE_RIVIAN_EVO,
> > + CLK_ALPHA_PLL_TYPE_DEFAULT_EVO,
> > + CLK_ALPHA_PLL_TYPE_BRAMMO_EVO,
> > ++ CLK_ALPHA_PLL_TYPE_STROMER,
> > + CLK_ALPHA_PLL_TYPE_MAX,
> > + };
> > +
> > +@@ -128,6 +133,9 @@ struct alpha_pll_config {
> > + u32 post_div_mask;
> > + u32 vco_val;
> > + u32 vco_mask;
> > ++ u32 status_val;
> > ++ u32 status_mask;
> > ++ u32 lock_det;
> > + };
> > +
> > + extern const struct clk_ops clk_alpha_pll_ops;
> > +@@ -136,6 +144,7 @@ extern const struct clk_ops clk_alpha_pll_hwfsm_ops;
> > + extern const struct clk_ops clk_alpha_pll_postdiv_ops;
> > + extern const struct clk_ops clk_alpha_pll_huayra_ops;
> > + extern const struct clk_ops clk_alpha_pll_postdiv_ro_ops;
> > ++extern const struct clk_ops clk_alpha_pll_stromer_ops;
> > +
> > + extern const struct clk_ops clk_alpha_pll_fabia_ops;
> > + extern const struct clk_ops clk_alpha_pll_fixed_fabia_ops;
> > +@@ -182,5 +191,7 @@ void clk_lucid_evo_pll_configure(struct clk_alpha_pll *pll, struct regmap *regma
> > + const struct alpha_pll_config *config);
> > + void clk_rivian_evo_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> > + const struct alpha_pll_config *config);
> > ++void clk_stromer_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> > ++ const struct alpha_pll_config *config);
> > +
> > + #endif
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0004-soc-qcom-socinfo-Add-IDs-for-IPQ9574-and-its-variant.patch b/target/linux/ipq95xx/patches-6.1/0004-soc-qcom-socinfo-Add-IDs-for-IPQ9574-and-its-variant.patch
> > new file mode 100644
> > index 0000000000..dbdda81419
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0004-soc-qcom-socinfo-Add-IDs-for-IPQ9574-and-its-variant.patch
> > @@ -0,0 +1,38 @@
> > +From d1429c2349b80274255a676404d15bb2e25fa4b9 Mon Sep 17 00:00:00 2001
> > +From: Varadarajan Narayanan <quic_varada at quicinc.com>
> > +Date: Tue, 14 Mar 2023 11:43:34 +0530
> > +Subject: [PATCH 04/41] soc: qcom: socinfo: Add IDs for IPQ9574 and its
> > + variants
> > +
> > +Add SOC ID for Qualcomm IPQ9574, IPQ9570, IPQ9554, IPQ9550,
> > +IPQ9514 and IPQ9510
> > +
> > +Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> > +Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> > +Reviewed-by: Kathiravan T <quic_kathirav at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/1678774414-14414-3-git-send-email-quic_varada@quicinc.com
> > +---
> > + drivers/soc/qcom/socinfo.c | 6 ++++++
> > + 1 file changed, 6 insertions(+)
> > +
> > +diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
> > +index 510a48dbc4ac..5b507f247a64 100644
> > +--- a/drivers/soc/qcom/socinfo.c
> > ++++ b/drivers/soc/qcom/socinfo.c
> > +@@ -280,6 +280,12 @@ static const struct soc_id soc_id[] = {
> > + { 487, "SC7280" },
> > + { 495, "SC7180P" },
> > + { 507, "SM6375" },
> > ++ { 510, "IPQ9514" },
> > ++ { 511, "IPQ9550" },
> > ++ { 512, "IPQ9554" },
> > ++ { 513, "IPQ9570" },
> > ++ { 514, "IPQ9574" },
> > ++ { 521, "IPQ9510" },
> > + };
> > +
> > + static const char *socinfo_machine(struct device *dev, unsigned int id)
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0005-arm64-dts-qcom-Add-ipq9574-SoC-and-AL02-board-suppor.patch b/target/linux/ipq95xx/patches-6.1/0005-arm64-dts-qcom-Add-ipq9574-SoC-and-AL02-board-suppor.patch
> > new file mode 100644
> > index 0000000000..43941c1386
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0005-arm64-dts-qcom-Add-ipq9574-SoC-and-AL02-board-suppor.patch
> > @@ -0,0 +1,404 @@
> > +From 036302b2ff40f3922ce839b44c4c731cb52d8766 Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Thu, 16 Mar 2023 12:59:39 +0530
> > +Subject: [PATCH 05/41] arm64: dts: qcom: Add ipq9574 SoC and AL02 board
> > + support
> > +
> > +Add initial device tree support for Qualcomm IPQ9574 SoC and AL02 board
> > +
> > +Co-developed-by: Anusha Rao <quic_anusha at quicinc.com>
> > +Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
> > +Co-developed-by: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
> > +Signed-off-by: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230316072940.29137-6-quic_devipriy@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/Makefile | 1 +
> > + arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 84 ++++++
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 270 +++++++++++++++++++
> > + 3 files changed, 355 insertions(+)
> > + create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
> > + create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > +index d7669a7cee9f..8e04f0f663da 100644
> > +--- a/arch/arm64/boot/dts/qcom/Makefile
> > ++++ b/arch/arm64/boot/dts/qcom/Makefile
> > +@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
> > ++dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
> > +new file mode 100644
> > +index 000000000000..2c8430197ec0
> > +--- /dev/null
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
> > +@@ -0,0 +1,84 @@
> > ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > ++/*
> > ++ * IPQ9574 AL02-C7 board device tree source
> > ++ *
> > ++ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> > ++ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> > ++ */
> > ++
> > ++/dts-v1/;
> > ++
> > ++#include "ipq9574.dtsi"
> > ++
> > ++/ {
> > ++ model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
> > ++ compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
> > ++
> > ++ aliases {
> > ++ serial0 = &blsp1_uart2;
> > ++ };
> > ++
> > ++ chosen {
> > ++ stdout-path = "serial0:115200n8";
> > ++ };
> > ++};
> > ++
> > ++&blsp1_uart2 {
> > ++ pinctrl-0 = <&uart2_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "okay";
> > ++};
> > ++
> > ++&sdhc_1 {
> > ++ pinctrl-0 = <&sdc_default_state>;
> > ++ pinctrl-names = "default";
> > ++ mmc-ddr-1_8v;
> > ++ mmc-hs200-1_8v;
> > ++ mmc-hs400-1_8v;
> > ++ mmc-hs400-enhanced-strobe;
> > ++ max-frequency = <384000000>;
> > ++ bus-width = <8>;
> > ++ status = "okay";
> > ++};
> > ++
> > ++&sleep_clk {
> > ++ clock-frequency = <32000>;
> > ++};
> > ++
> > ++&tlmm {
> > ++ sdc_default_state: sdc-default-state {
> > ++ clk-pins {
> > ++ pins = "gpio5";
> > ++ function = "sdc_clk";
> > ++ drive-strength = <8>;
> > ++ bias-disable;
> > ++ };
> > ++
> > ++ cmd-pins {
> > ++ pins = "gpio4";
> > ++ function = "sdc_cmd";
> > ++ drive-strength = <8>;
> > ++ bias-pull-up;
> > ++ };
> > ++
> > ++ data-pins {
> > ++ pins = "gpio0", "gpio1", "gpio2",
> > ++ "gpio3", "gpio6", "gpio7",
> > ++ "gpio8", "gpio9";
> > ++ function = "sdc_data";
> > ++ drive-strength = <8>;
> > ++ bias-pull-up;
> > ++ };
> > ++
> > ++ rclk-pins {
> > ++ pins = "gpio10";
> > ++ function = "sdc_rclk";
> > ++ drive-strength = <8>;
> > ++ bias-pull-down;
> > ++ };
> > ++ };
> > ++};
> > ++
> > ++&xo_board_clk {
> > ++ clock-frequency = <24000000>;
> > ++};
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +new file mode 100644
> > +index 000000000000..3bb7435f5e7f
> > +--- /dev/null
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -0,0 +1,270 @@
> > ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > ++/*
> > ++ * IPQ9574 SoC device tree source
> > ++ *
> > ++ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> > ++ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> > ++ */
> > ++
> > ++#include <dt-bindings/interrupt-controller/arm-gic.h>
> > ++#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
> > ++#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
> > ++
> > ++/ {
> > ++ interrupt-parent = <&intc>;
> > ++ #address-cells = <2>;
> > ++ #size-cells = <2>;
> > ++
> > ++ clocks {
> > ++ bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
> > ++ compatible = "fixed-clock";
> > ++ clock-frequency = <353000000>;
> > ++ #clock-cells = <0>;
> > ++ };
> > ++
> > ++ sleep_clk: sleep-clk {
> > ++ compatible = "fixed-clock";
> > ++ #clock-cells = <0>;
> > ++ };
> > ++
> > ++ xo_board_clk: xo-board-clk {
> > ++ compatible = "fixed-clock";
> > ++ #clock-cells = <0>;
> > ++ };
> > ++ };
> > ++
> > ++ cpus {
> > ++ #address-cells = <1>;
> > ++ #size-cells = <0>;
> > ++
> > ++ CPU0: cpu at 0 {
> > ++ device_type = "cpu";
> > ++ compatible = "arm,cortex-a73";
> > ++ reg = <0x0>;
> > ++ enable-method = "psci";
> > ++ next-level-cache = <&L2_0>;
> > ++ };
> > ++
> > ++ CPU1: cpu at 1 {
> > ++ device_type = "cpu";
> > ++ compatible = "arm,cortex-a73";
> > ++ reg = <0x1>;
> > ++ enable-method = "psci";
> > ++ next-level-cache = <&L2_0>;
> > ++ };
> > ++
> > ++ CPU2: cpu at 2 {
> > ++ device_type = "cpu";
> > ++ compatible = "arm,cortex-a73";
> > ++ reg = <0x2>;
> > ++ enable-method = "psci";
> > ++ next-level-cache = <&L2_0>;
> > ++ };
> > ++
> > ++ CPU3: cpu at 3 {
> > ++ device_type = "cpu";
> > ++ compatible = "arm,cortex-a73";
> > ++ reg = <0x3>;
> > ++ enable-method = "psci";
> > ++ next-level-cache = <&L2_0>;
> > ++ };
> > ++
> > ++ L2_0: l2-cache {
> > ++ compatible = "cache";
> > ++ cache-level = <2>;
> > ++ };
> > ++ };
> > ++
> > ++ memory at 40000000 {
> > ++ device_type = "memory";
> > ++ /* We expect the bootloader to fill in the size */
> > ++ reg = <0x0 0x40000000 0x0 0x0>;
> > ++ };
> > ++
> > ++ pmu {
> > ++ compatible = "arm,cortex-a73-pmu";
> > ++ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> > ++ };
> > ++
> > ++ psci {
> > ++ compatible = "arm,psci-1.0";
> > ++ method = "smc";
> > ++ };
> > ++
> > ++ reserved-memory {
> > ++ #address-cells = <2>;
> > ++ #size-cells = <2>;
> > ++ ranges;
> > ++
> > ++ tz_region: tz at 4a600000 {
> > ++ reg = <0x0 0x4a600000 0x0 0x400000>;
> > ++ no-map;
> > ++ };
> > ++ };
> > ++
> > ++ soc: soc at 0 {
> > ++ compatible = "simple-bus";
> > ++ #address-cells = <1>;
> > ++ #size-cells = <1>;
> > ++ ranges = <0 0 0 0xffffffff>;
> > ++
> > ++ tlmm: pinctrl at 1000000 {
> > ++ compatible = "qcom,ipq9574-tlmm";
> > ++ reg = <0x01000000 0x300000>;
> > ++ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> > ++ gpio-controller;
> > ++ #gpio-cells = <2>;
> > ++ gpio-ranges = <&tlmm 0 0 65>;
> > ++ interrupt-controller;
> > ++ #interrupt-cells = <2>;
> > ++
> > ++ uart2_pins: uart2-state {
> > ++ pins = "gpio34", "gpio35";
> > ++ function = "blsp2_uart";
> > ++ drive-strength = <8>;
> > ++ bias-disable;
> > ++ };
> > ++ };
> > ++
> > ++ gcc: clock-controller at 1800000 {
> > ++ compatible = "qcom,ipq9574-gcc";
> > ++ reg = <0x01800000 0x80000>;
> > ++ clocks = <&xo_board_clk>,
> > ++ <&sleep_clk>,
> > ++ <&bias_pll_ubi_nc_clk>,
> > ++ <0>,
> > ++ <0>,
> > ++ <0>,
> > ++ <0>,
> > ++ <0>;
> > ++ #clock-cells = <1>;
> > ++ #reset-cells = <1>;
> > ++ #power-domain-cells = <1>;
> > ++ };
> > ++
> > ++ sdhc_1: mmc at 7804000 {
> > ++ compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
> > ++ reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
> > ++ reg-names = "hc", "cqhci";
> > ++
> > ++ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> > ++ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> > ++ interrupt-names = "hc_irq", "pwr_irq";
> > ++
> > ++ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> > ++ <&gcc GCC_SDCC1_APPS_CLK>,
> > ++ <&xo_board_clk>;
> > ++ clock-names = "iface", "core", "xo";
> > ++ non-removable;
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ blsp1_uart2: serial at 78b1000 {
> > ++ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> > ++ reg = <0x078b1000 0x200>;
> > ++ interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ intc: interrupt-controller at b000000 {
> > ++ compatible = "qcom,msm-qgic2";
> > ++ reg = <0x0b000000 0x1000>, /* GICD */
> > ++ <0x0b002000 0x1000>, /* GICC */
> > ++ <0x0b001000 0x1000>, /* GICH */
> > ++ <0x0b004000 0x1000>; /* GICV */
> > ++ #address-cells = <1>;
> > ++ #size-cells = <1>;
> > ++ interrupt-controller;
> > ++ #interrupt-cells = <3>;
> > ++ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > ++ ranges = <0 0x0b00c000 0x3000>;
> > ++
> > ++ v2m0: v2m at 0 {
> > ++ compatible = "arm,gic-v2m-frame";
> > ++ reg = <0x00000000 0xffd>;
> > ++ msi-controller;
> > ++ };
> > ++
> > ++ v2m1: v2m at 1000 {
> > ++ compatible = "arm,gic-v2m-frame";
> > ++ reg = <0x00001000 0xffd>;
> > ++ msi-controller;
> > ++ };
> > ++
> > ++ v2m2: v2m at 2000 {
> > ++ compatible = "arm,gic-v2m-frame";
> > ++ reg = <0x00002000 0xffd>;
> > ++ msi-controller;
> > ++ };
> > ++ };
> > ++
> > ++ timer at b120000 {
> > ++ compatible = "arm,armv7-timer-mem";
> > ++ reg = <0x0b120000 0x1000>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <1>;
> > ++ ranges;
> > ++
> > ++ frame at b120000 {
> > ++ reg = <0x0b121000 0x1000>,
> > ++ <0x0b122000 0x1000>;
> > ++ frame-number = <0>;
> > ++ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> > ++ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> > ++ };
> > ++
> > ++ frame at b123000 {
> > ++ reg = <0x0b123000 0x1000>;
> > ++ frame-number = <1>;
> > ++ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ frame at b124000 {
> > ++ reg = <0x0b124000 0x1000>;
> > ++ frame-number = <2>;
> > ++ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ frame at b125000 {
> > ++ reg = <0x0b125000 0x1000>;
> > ++ frame-number = <3>;
> > ++ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ frame at b126000 {
> > ++ reg = <0x0b126000 0x1000>;
> > ++ frame-number = <4>;
> > ++ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ frame at b127000 {
> > ++ reg = <0x0b127000 0x1000>;
> > ++ frame-number = <5>;
> > ++ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ frame at b128000 {
> > ++ reg = <0x0b128000 0x1000>;
> > ++ frame-number = <6>;
> > ++ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> > ++ status = "disabled";
> > ++ };
> > ++ };
> > ++ };
> > ++
> > ++ timer {
> > ++ compatible = "arm,armv8-timer";
> > ++ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> > ++ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> > ++ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> > ++ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> > ++ };
> > ++};
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0006-arm64-defconfig-Enable-IPQ9574-SoC-base-configs.patch b/target/linux/ipq95xx/patches-6.1/0006-arm64-defconfig-Enable-IPQ9574-SoC-base-configs.patch
> > new file mode 100644
> > index 0000000000..39a373a915
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0006-arm64-defconfig-Enable-IPQ9574-SoC-base-configs.patch
> > @@ -0,0 +1,38 @@
> > +From 10899f01cc0a72a2a06b2baa2261c5b898e4a26d Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Thu, 16 Mar 2023 12:59:40 +0530
> > +Subject: [PATCH 06/41] arm64: defconfig: Enable IPQ9574 SoC base configs
> > +
> > +Enables clk & pinctrl related configs for Qualcomm IPQ9574 SoC
> > +
> > +Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230316072940.29137-7-quic_devipriy@quicinc.com
> > +---
> > + arch/arm64/configs/defconfig | 2 ++
> > + 1 file changed, 2 insertions(+)
> > +
> > +diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> > +index 623e9f308f38..90dd3cf7bcad 100644
> > +--- a/arch/arm64/configs/defconfig
> > ++++ b/arch/arm64/configs/defconfig
> > +@@ -537,6 +537,7 @@ CONFIG_PINCTRL_IMX93=y
> > + CONFIG_PINCTRL_MSM=y
> > + CONFIG_PINCTRL_IPQ8074=y
> > + CONFIG_PINCTRL_IPQ6018=y
> > ++CONFIG_PINCTRL_IPQ9574=y
> > + CONFIG_PINCTRL_MSM8916=y
> > + CONFIG_PINCTRL_MSM8994=y
> > + CONFIG_PINCTRL_MSM8996=y
> > +@@ -1068,6 +1069,7 @@ CONFIG_QCOM_CLK_SMD_RPM=y
> > + CONFIG_QCOM_CLK_RPMH=y
> > + CONFIG_IPQ_GCC_6018=y
> > + CONFIG_IPQ_GCC_8074=y
> > ++CONFIG_IPQ_GCC_9574=y
> > + CONFIG_MSM_GCC_8916=y
> > + CONFIG_MSM_GCC_8994=y
> > + CONFIG_MSM_MMCC_8996=y
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0007-clk-qcom-Add-Global-Clock-Controller-driver-for-IPQ9.patch b/target/linux/ipq95xx/patches-6.1/0007-clk-qcom-Add-Global-Clock-Controller-driver-for-IPQ9.patch
> > new file mode 100644
> > index 0000000000..a5d30558c2
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0007-clk-qcom-Add-Global-Clock-Controller-driver-for-IPQ9.patch
> > @@ -0,0 +1,4308 @@
> > +From 443758ff3c5ab0445bc802cb4d4a318691de2917 Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Thu, 16 Mar 2023 12:59:36 +0530
> > +Subject: [PATCH 07/41] clk: qcom: Add Global Clock Controller driver for
> > + IPQ9574
> > +
> > +Add Global Clock Controller (GCC) driver for ipq9574 based devices
> > +
> > +Co-developed-by: Anusha Rao <quic_anusha at quicinc.com>
> > +Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230316072940.29137-3-quic_devipriy@quicinc.com
> > +---
> > + drivers/clk/qcom/Kconfig | 8 +
> > + drivers/clk/qcom/Makefile | 1 +
> > + drivers/clk/qcom/gcc-ipq9574.c | 4248 ++++++++++++++++++++++++++++++++
> > + 3 files changed, 4257 insertions(+)
> > + create mode 100644 drivers/clk/qcom/gcc-ipq9574.c
> > +
> > +diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> > +index cbf55949c649..94340ee631c3 100644
> > +--- a/drivers/clk/qcom/Kconfig
> > ++++ b/drivers/clk/qcom/Kconfig
> > +@@ -174,6 +174,14 @@ config IPQ_GCC_8074
> > + i2c, USB, SD/eMMC, etc. Select this for the root clock
> > + of ipq8074.
> > +
> > ++config IPQ_GCC_9574
> > ++ tristate "IPQ9574 Global Clock Controller"
> > ++ help
> > ++ Support for global clock controller on ipq9574 devices.
> > ++ Say Y if you want to use peripheral devices such as UART, SPI,
> > ++ i2c, USB, SD/eMMC, etc. Select this for the root clock
> > ++ of ipq9574.
> > ++
> > + config MSM_GCC_8660
> > + tristate "MSM8660 Global Clock Controller"
> > + help
> > +diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> > +index e6cecf9e0436..1a4c4d55cb17 100644
> > +--- a/drivers/clk/qcom/Makefile
> > ++++ b/drivers/clk/qcom/Makefile
> > +@@ -27,6 +27,7 @@ obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
> > + obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
> > + obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
> > + obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o
> > ++obj-$(CONFIG_IPQ_GCC_9574) += gcc-ipq9574.o
> > + obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
> > + obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o
> > + obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o
> > +diff --git a/drivers/clk/qcom/gcc-ipq9574.c b/drivers/clk/qcom/gcc-ipq9574.c
> > +new file mode 100644
> > +index 000000000000..b2a2d618a5ec
> > +--- /dev/null
> > ++++ b/drivers/clk/qcom/gcc-ipq9574.c
> > +@@ -0,0 +1,4248 @@
> > ++// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > ++/*
> > ++ * Copyright (c) 2023 The Linux Foundation. All rights reserved.
> > ++ */
> > ++
> > ++#include <linux/kernel.h>
> > ++#include <linux/err.h>
> > ++#include <linux/platform_device.h>
> > ++#include <linux/module.h>
> > ++#include <linux/of.h>
> > ++#include <linux/of_device.h>
> > ++#include <linux/regmap.h>
> > ++
> > ++#include <linux/reset-controller.h>
> > ++#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
> > ++#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
> > ++
> > ++#include "clk-rcg.h"
> > ++#include "clk-branch.h"
> > ++#include "clk-alpha-pll.h"
> > ++#include "clk-regmap-divider.h"
> > ++#include "clk-regmap-mux.h"
> > ++#include "clk-regmap-phy-mux.h"
> > ++#include "reset.h"
> > ++
> > ++/* Need to match the order of clocks in DT binding */
> > ++enum {
> > ++ DT_XO,
> > ++ DT_SLEEP_CLK,
> > ++ DT_BIAS_PLL_UBI_NC_CLK,
> > ++ DT_PCIE30_PHY0_PIPE_CLK,
> > ++ DT_PCIE30_PHY1_PIPE_CLK,
> > ++ DT_PCIE30_PHY2_PIPE_CLK,
> > ++ DT_PCIE30_PHY3_PIPE_CLK,
> > ++ DT_USB3PHY_0_CC_PIPE_CLK,
> > ++};
> > ++
> > ++enum {
> > ++ P_XO,
> > ++ P_PCIE30_PHY0_PIPE,
> > ++ P_PCIE30_PHY1_PIPE,
> > ++ P_PCIE30_PHY2_PIPE,
> > ++ P_PCIE30_PHY3_PIPE,
> > ++ P_USB3PHY_0_PIPE,
> > ++ P_GPLL0,
> > ++ P_GPLL0_DIV2,
> > ++ P_GPLL0_OUT_AUX,
> > ++ P_GPLL2,
> > ++ P_GPLL4,
> > ++ P_PI_SLEEP,
> > ++ P_BIAS_PLL_UBI_NC_CLK,
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_map[] = {
> > ++ { P_XO, 0 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_data[] = {
> > ++ { .index = DT_XO },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_sleep_clk_data[] = {
> > ++ { .index = DT_SLEEP_CLK },
> > ++};
> > ++
> > ++static struct clk_alpha_pll gpll0_main = {
> > ++ .offset = 0x20000,
> > ++ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
> > ++ .clkr = {
> > ++ .enable_reg = 0x0b000,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gpll0_main",
> > ++ .parent_data = gcc_xo_data,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_data),
> > ++ .ops = &clk_alpha_pll_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_fixed_factor gpll0_out_main_div2 = {
> > ++ .mult = 1,
> > ++ .div = 2,
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gpll0_out_main_div2",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &gpll0_main.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_fixed_factor_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_alpha_pll_postdiv gpll0 = {
> > ++ .offset = 0x20000,
> > ++ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
> > ++ .width = 4,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "gpll0",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &gpll0_main.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_alpha_pll_postdiv_ro_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_alpha_pll gpll4_main = {
> > ++ .offset = 0x22000,
> > ++ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
> > ++ .clkr = {
> > ++ .enable_reg = 0x0b000,
> > ++ .enable_mask = BIT(2),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gpll4_main",
> > ++ .parent_data = gcc_xo_data,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_data),
> > ++ .ops = &clk_alpha_pll_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_alpha_pll_postdiv gpll4 = {
> > ++ .offset = 0x22000,
> > ++ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
> > ++ .width = 4,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "gpll4",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &gpll4_main.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_alpha_pll_postdiv_ro_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_alpha_pll gpll2_main = {
> > ++ .offset = 0x21000,
> > ++ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
> > ++ .clkr = {
> > ++ .enable_reg = 0x0b000,
> > ++ .enable_mask = BIT(1),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gpll2_main",
> > ++ .parent_data = gcc_xo_data,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_data),
> > ++ .ops = &clk_alpha_pll_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_alpha_pll_postdiv gpll2 = {
> > ++ .offset = 0x21000,
> > ++ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
> > ++ .width = 4,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "gpll2",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &gpll2_main.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_alpha_pll_postdiv_ro_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_sleep_clk_src = {
> > ++ .halt_reg = 0x3400c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x3400c,
> > ++ .enable_mask = BIT(1),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_sleep_clk_src",
> > ++ .parent_data = gcc_sleep_clk_data,
> > ++ .num_parents = ARRAY_SIZE(gcc_sleep_clk_data),
> > ++ .flags = CLK_IS_CRITICAL,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll0_out_main_div2.hw },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++ { P_GPLL0_DIV2, 4 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_gpll0[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_gpll0_gpll4[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll4.clkr.hw },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_gpll4_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++ { P_GPLL4, 2 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_gpll0_gpll0_div2_gpll0[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll0_out_main_div2.hw },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_gpll0_div2_gpll0_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++ { P_GPLL0_DIV2, 4 },
> > ++ { P_GPLL0, 5 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_gpll0_gpll0_sleep_clk[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll0_out_main_div2.hw },
> > ++ { .index = DT_SLEEP_CLK },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_gpll0_sleep_clk_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++ { P_GPLL0_DIV2, 4 },
> > ++ { P_PI_SLEEP, 6 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_gpll0_core_pi_sleep_clk[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .index = DT_SLEEP_CLK },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_core_pi_sleep_clk_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 2 },
> > ++ { P_PI_SLEEP, 6 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll4.clkr.hw },
> > ++ { .index = DT_BIAS_PLL_UBI_NC_CLK },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++ { P_GPLL4, 2 },
> > ++ { P_BIAS_PLL_UBI_NC_CLK, 3 },
> > ++};
> > ++
> > ++static const struct clk_parent_data
> > ++ gcc_xo_gpll0_gpll0_aux_core_pi_sleep_clk[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .index = DT_SLEEP_CLK },
> > ++};
> > ++
> > ++static const struct parent_map
> > ++ gcc_xo_gpll0_gpll0_aux_core_pi_sleep_clk_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++ { P_GPLL0_OUT_AUX, 2 },
> > ++ { P_PI_SLEEP, 6 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_gpll0_out_main_div2_gpll0[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll0_out_main_div2.hw },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_out_main_div2_gpll0_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++ { P_GPLL0_DIV2, 4 },
> > ++};
> > ++
> > ++static const struct clk_parent_data
> > ++ gcc_xo_gpll4_gpll0_gpll0_out_main_div2[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll4.clkr.hw },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll0_out_main_div2.hw },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll4_gpll0_gpll0_out_main_div2_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL4, 1 },
> > ++ { P_GPLL0, 3 },
> > ++ { P_GPLL0_DIV2, 4 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = {
> > ++ { .index = DT_USB3PHY_0_CC_PIPE_CLK },
> > ++ { .index = DT_XO },
> > ++};
> > ++
> > ++static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = {
> > ++ { P_USB3PHY_0_PIPE, 0 },
> > ++ { P_XO, 2 },
> > ++};
> > ++
> > ++static const struct clk_parent_data
> > ++ gcc_xo_gpll0_gpll2_gpll0_out_main_div2[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll2.clkr.hw },
> > ++ { .hw = &gpll0_out_main_div2.hw },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++ { P_GPLL2, 2 },
> > ++ { P_GPLL0_DIV2, 4 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_gpll0_gpll4_gpll0_div2[] = {
> > ++ { .index = DT_XO},
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll4.clkr.hw },
> > ++ { .hw = &gpll0_out_main_div2.hw },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_gpll4_gpll0_div2_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++ { P_GPLL4, 2 },
> > ++ { P_GPLL0_DIV2, 4 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_gpll4_gpll0_gpll0_div2[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll4.clkr.hw },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll0_out_main_div2.hw },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll4_gpll0_gpll0_div2_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL4, 1 },
> > ++ { P_GPLL0, 2 },
> > ++ { P_GPLL0_DIV2, 4 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_gpll0_gpll2[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll2.clkr.hw },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_gpll2_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++ { P_GPLL2, 2 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_gpll0_gpll2_gpll4_pi_sleep[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll2.clkr.hw },
> > ++ { .hw = &gpll4.clkr.hw },
> > ++ { .index = DT_SLEEP_CLK },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_gpll2_gpll4_pi_sleep_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++ { P_GPLL2, 2 },
> > ++ { P_GPLL4, 3 },
> > ++ { P_PI_SLEEP, 6 },
> > ++};
> > ++
> > ++static const struct clk_parent_data gcc_xo_gpll0_gpll0_aux_gpll2[] = {
> > ++ { .index = DT_XO },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll0.clkr.hw },
> > ++ { .hw = &gpll2.clkr.hw },
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_gpll0_aux_gpll2_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++ { P_GPLL0_OUT_AUX, 2 },
> > ++ { P_GPLL2, 3 },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_apss_ahb_clk_src[] = {
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(50000000, P_GPLL0, 16, 0, 0),
> > ++ F(100000000, P_GPLL0, 8, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 apss_ahb_clk_src = {
> > ++ .cmd_rcgr = 0x2400c,
> > ++ .freq_tbl = ftbl_apss_ahb_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "apss_ahb_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_apss_axi_clk_src[] = {
> > ++ F(533000000, P_GPLL0, 1.5, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 apss_axi_clk_src = {
> > ++ .cmd_rcgr = 0x24004,
> > ++ .freq_tbl = ftbl_apss_axi_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_div2_gpll0_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "apss_axi_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_div2_gpll0,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_div2_gpll0),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_blsp1_qup_i2c_apps_clk_src[] = {
> > ++ F(9600000, P_XO, 2.5, 0, 0),
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(50000000, P_GPLL0, 16, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_qup1_i2c_apps_clk_src = {
> > ++ .cmd_rcgr = 0x02018,
> > ++ .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_qup1_i2c_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_blsp1_qup_spi_apps_clk_src[] = {
> > ++ F(960000, P_XO, 10, 2, 5),
> > ++ F(4800000, P_XO, 5, 0, 0),
> > ++ F(9600000, P_XO, 2, 4, 5),
> > ++ F(16000000, P_GPLL0, 10, 1, 5),
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(25000000, P_GPLL0, 16, 1, 2),
> > ++ F(50000000, P_GPLL0, 16, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_qup1_spi_apps_clk_src = {
> > ++ .cmd_rcgr = 0x02004,
> > ++ .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src,
> > ++ .mnd_width = 8,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_qup1_spi_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_qup2_i2c_apps_clk_src = {
> > ++ .cmd_rcgr = 0x03018,
> > ++ .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_qup2_i2c_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_qup2_spi_apps_clk_src = {
> > ++ .cmd_rcgr = 0x03004,
> > ++ .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src,
> > ++ .mnd_width = 8,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_qup2_spi_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_qup3_i2c_apps_clk_src = {
> > ++ .cmd_rcgr = 0x04018,
> > ++ .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_qup3_i2c_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_qup3_spi_apps_clk_src = {
> > ++ .cmd_rcgr = 0x04004,
> > ++ .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src,
> > ++ .mnd_width = 8,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_qup3_spi_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_qup4_i2c_apps_clk_src = {
> > ++ .cmd_rcgr = 0x05018,
> > ++ .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_qup4_i2c_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_qup4_spi_apps_clk_src = {
> > ++ .cmd_rcgr = 0x05004,
> > ++ .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src,
> > ++ .mnd_width = 8,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_qup4_spi_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_qup5_i2c_apps_clk_src = {
> > ++ .cmd_rcgr = 0x06018,
> > ++ .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_qup5_i2c_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_qup5_spi_apps_clk_src = {
> > ++ .cmd_rcgr = 0x06004,
> > ++ .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src,
> > ++ .mnd_width = 8,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_qup5_spi_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_qup6_i2c_apps_clk_src = {
> > ++ .cmd_rcgr = 0x07018,
> > ++ .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_qup6_i2c_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_qup6_spi_apps_clk_src = {
> > ++ .cmd_rcgr = 0x07004,
> > ++ .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src,
> > ++ .mnd_width = 8,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_qup6_spi_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_blsp1_uart_apps_clk_src[] = {
> > ++ F(3686400, P_GPLL0_DIV2, 1, 144, 15625),
> > ++ F(7372800, P_GPLL0_DIV2, 1, 288, 15625),
> > ++ F(14745600, P_GPLL0_DIV2, 1, 576, 15625),
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(25000000, P_GPLL0, 16, 1, 2),
> > ++ F(32000000, P_GPLL0, 1, 1, 25),
> > ++ F(40000000, P_GPLL0, 1, 1, 20),
> > ++ F(46400000, P_GPLL0, 1, 29, 500),
> > ++ F(48000000, P_GPLL0, 1, 3, 50),
> > ++ F(51200000, P_GPLL0, 1, 8, 125),
> > ++ F(56000000, P_GPLL0, 1, 7, 100),
> > ++ F(58982400, P_GPLL0, 1, 1152, 15625),
> > ++ F(60000000, P_GPLL0, 1, 3, 40),
> > ++ F(64000000, P_GPLL0, 12.5, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_uart1_apps_clk_src = {
> > ++ .cmd_rcgr = 0x0202c,
> > ++ .freq_tbl = ftbl_blsp1_uart_apps_clk_src,
> > ++ .mnd_width = 16,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_uart1_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_uart2_apps_clk_src = {
> > ++ .cmd_rcgr = 0x0302c,
> > ++ .freq_tbl = ftbl_blsp1_uart_apps_clk_src,
> > ++ .mnd_width = 16,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_uart2_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_uart3_apps_clk_src = {
> > ++ .cmd_rcgr = 0x0402c,
> > ++ .freq_tbl = ftbl_blsp1_uart_apps_clk_src,
> > ++ .mnd_width = 16,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_uart3_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_uart4_apps_clk_src = {
> > ++ .cmd_rcgr = 0x0502c,
> > ++ .freq_tbl = ftbl_blsp1_uart_apps_clk_src,
> > ++ .mnd_width = 16,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_uart4_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_uart5_apps_clk_src = {
> > ++ .cmd_rcgr = 0x0602c,
> > ++ .freq_tbl = ftbl_blsp1_uart_apps_clk_src,
> > ++ .mnd_width = 16,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_uart5_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 blsp1_uart6_apps_clk_src = {
> > ++ .cmd_rcgr = 0x0702c,
> > ++ .freq_tbl = ftbl_blsp1_uart_apps_clk_src,
> > ++ .mnd_width = 16,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "blsp1_uart6_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_apss_ahb_clk = {
> > ++ .halt_reg = 0x24018,
> > ++ .halt_check = BRANCH_HALT_VOTED,
> > ++ .clkr = {
> > ++ .enable_reg = 0x0b004,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_apss_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &apss_ahb_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_apss_axi_clk = {
> > ++ .halt_reg = 0x2401c,
> > ++ .halt_check = BRANCH_HALT_VOTED,
> > ++ .clkr = {
> > ++ .enable_reg = 0x0b004,
> > ++ .enable_mask = BIT(1),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_apss_axi_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &apss_axi_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_qup1_i2c_apps_clk = {
> > ++ .halt_reg = 0x2024,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2024,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_qup1_i2c_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_qup1_i2c_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_qup1_spi_apps_clk = {
> > ++ .halt_reg = 0x02020,
> > ++ .clkr = {
> > ++ .enable_reg = 0x02020,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_qup1_spi_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_qup1_spi_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_qup2_i2c_apps_clk = {
> > ++ .halt_reg = 0x03024,
> > ++ .clkr = {
> > ++ .enable_reg = 0x03024,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_qup2_i2c_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_qup2_i2c_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_qup2_spi_apps_clk = {
> > ++ .halt_reg = 0x03020,
> > ++ .clkr = {
> > ++ .enable_reg = 0x03020,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_qup2_spi_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_qup2_spi_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_qup3_i2c_apps_clk = {
> > ++ .halt_reg = 0x04024,
> > ++ .clkr = {
> > ++ .enable_reg = 0x04024,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_qup3_i2c_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_qup3_i2c_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_qup3_spi_apps_clk = {
> > ++ .halt_reg = 0x04020,
> > ++ .clkr = {
> > ++ .enable_reg = 0x04020,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_qup3_spi_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_qup3_spi_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_qup4_i2c_apps_clk = {
> > ++ .halt_reg = 0x05024,
> > ++ .clkr = {
> > ++ .enable_reg = 0x05024,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_qup4_i2c_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_qup4_i2c_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_qup4_spi_apps_clk = {
> > ++ .halt_reg = 0x05020,
> > ++ .clkr = {
> > ++ .enable_reg = 0x05020,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_qup4_spi_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_qup4_spi_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_qup5_i2c_apps_clk = {
> > ++ .halt_reg = 0x06024,
> > ++ .clkr = {
> > ++ .enable_reg = 0x06024,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_qup5_i2c_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_qup5_i2c_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_qup5_spi_apps_clk = {
> > ++ .halt_reg = 0x06020,
> > ++ .clkr = {
> > ++ .enable_reg = 0x06020,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_qup5_spi_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_qup5_spi_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_qup6_i2c_apps_clk = {
> > ++ .halt_reg = 0x07024,
> > ++ .clkr = {
> > ++ .enable_reg = 0x07024,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_qup6_i2c_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_qup6_i2c_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_qup6_spi_apps_clk = {
> > ++ .halt_reg = 0x07020,
> > ++ .clkr = {
> > ++ .enable_reg = 0x07020,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_qup6_spi_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_qup6_spi_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_uart1_apps_clk = {
> > ++ .halt_reg = 0x02040,
> > ++ .clkr = {
> > ++ .enable_reg = 0x02040,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_uart1_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_uart1_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_uart2_apps_clk = {
> > ++ .halt_reg = 0x03040,
> > ++ .clkr = {
> > ++ .enable_reg = 0x03040,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_uart2_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_uart2_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_uart3_apps_clk = {
> > ++ .halt_reg = 0x04054,
> > ++ .clkr = {
> > ++ .enable_reg = 0x04054,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_uart3_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_uart3_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_uart4_apps_clk = {
> > ++ .halt_reg = 0x05040,
> > ++ .clkr = {
> > ++ .enable_reg = 0x05040,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_uart4_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_uart4_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_uart5_apps_clk = {
> > ++ .halt_reg = 0x06040,
> > ++ .clkr = {
> > ++ .enable_reg = 0x06040,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_uart5_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_uart5_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_uart6_apps_clk = {
> > ++ .halt_reg = 0x07040,
> > ++ .clkr = {
> > ++ .enable_reg = 0x07040,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_uart6_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &blsp1_uart6_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_pcie0_axi_m_clk_src[] = {
> > ++ F(240000000, P_GPLL4, 5, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 pcie0_axi_m_clk_src = {
> > ++ .cmd_rcgr = 0x28018,
> > ++ .freq_tbl = ftbl_pcie0_axi_m_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll4_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie0_axi_m_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll4,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie0_axi_m_clk = {
> > ++ .halt_reg = 0x28038,
> > ++ .clkr = {
> > ++ .enable_reg = 0x28038,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie0_axi_m_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie0_axi_m_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_anoc_pcie0_1lane_m_clk = {
> > ++ .halt_reg = 0x2e07c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e07c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_anoc_pcie0_1lane_m_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie0_axi_m_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 pcie1_axi_m_clk_src = {
> > ++ .cmd_rcgr = 0x29018,
> > ++ .freq_tbl = ftbl_pcie0_axi_m_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll4_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie1_axi_m_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll4,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie1_axi_m_clk = {
> > ++ .halt_reg = 0x29038,
> > ++ .clkr = {
> > ++ .enable_reg = 0x29038,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie1_axi_m_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie1_axi_m_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_anoc_pcie1_1lane_m_clk = {
> > ++ .halt_reg = 0x2e08c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e08c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_anoc_pcie1_1lane_m_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie1_axi_m_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_pcie2_axi_m_clk_src[] = {
> > ++ F(342857143, P_GPLL4, 3.5, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 pcie2_axi_m_clk_src = {
> > ++ .cmd_rcgr = 0x2a018,
> > ++ .freq_tbl = ftbl_pcie2_axi_m_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie2_axi_m_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie2_axi_m_clk = {
> > ++ .halt_reg = 0x2a038,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2a038,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie2_axi_m_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie2_axi_m_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_anoc_pcie2_2lane_m_clk = {
> > ++ .halt_reg = 0x2e080,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e080,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_anoc_pcie2_2lane_m_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie2_axi_m_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 pcie3_axi_m_clk_src = {
> > ++ .cmd_rcgr = 0x2b018,
> > ++ .freq_tbl = ftbl_pcie2_axi_m_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie3_axi_m_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie3_axi_m_clk = {
> > ++ .halt_reg = 0x2b038,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2b038,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie3_axi_m_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie3_axi_m_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_anoc_pcie3_2lane_m_clk = {
> > ++ .halt_reg = 0x2e090,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e090,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_anoc_pcie3_2lane_m_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie3_axi_m_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 pcie0_axi_s_clk_src = {
> > ++ .cmd_rcgr = 0x28020,
> > ++ .freq_tbl = ftbl_pcie0_axi_m_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll4_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie0_axi_s_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll4,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie0_axi_s_clk = {
> > ++ .halt_reg = 0x2803c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2803c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie0_axi_s_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie0_axi_s_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie0_axi_s_bridge_clk = {
> > ++ .halt_reg = 0x28040,
> > ++ .clkr = {
> > ++ .enable_reg = 0x28040,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie0_axi_s_bridge_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie0_axi_s_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_snoc_pcie0_1lane_s_clk = {
> > ++ .halt_reg = 0x2e048,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e048,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_snoc_pcie0_1lane_s_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie0_axi_s_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 pcie1_axi_s_clk_src = {
> > ++ .cmd_rcgr = 0x29020,
> > ++ .freq_tbl = ftbl_pcie0_axi_m_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll4_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie1_axi_s_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll4,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie1_axi_s_clk = {
> > ++ .halt_reg = 0x2903c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2903c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie1_axi_s_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie1_axi_s_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie1_axi_s_bridge_clk = {
> > ++ .halt_reg = 0x29040,
> > ++ .clkr = {
> > ++ .enable_reg = 0x29040,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie1_axi_s_bridge_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie1_axi_s_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_snoc_pcie1_1lane_s_clk = {
> > ++ .halt_reg = 0x2e04c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e04c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_snoc_pcie1_1lane_s_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie1_axi_s_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 pcie2_axi_s_clk_src = {
> > ++ .cmd_rcgr = 0x2a020,
> > ++ .freq_tbl = ftbl_pcie0_axi_m_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll4_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie2_axi_s_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll4,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie2_axi_s_clk = {
> > ++ .halt_reg = 0x2a03c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2a03c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie2_axi_s_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie2_axi_s_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie2_axi_s_bridge_clk = {
> > ++ .halt_reg = 0x2a040,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2a040,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie2_axi_s_bridge_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie2_axi_s_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_snoc_pcie2_2lane_s_clk = {
> > ++ .halt_reg = 0x2e050,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e050,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_snoc_pcie2_2lane_s_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie2_axi_s_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 pcie3_axi_s_clk_src = {
> > ++ .cmd_rcgr = 0x2b020,
> > ++ .freq_tbl = ftbl_pcie0_axi_m_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll4_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie3_axi_s_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll4,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie3_axi_s_clk = {
> > ++ .halt_reg = 0x2b03c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2b03c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie3_axi_s_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie3_axi_s_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie3_axi_s_bridge_clk = {
> > ++ .halt_reg = 0x2b040,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2b040,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie3_axi_s_bridge_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie3_axi_s_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_snoc_pcie3_2lane_s_clk = {
> > ++ .halt_reg = 0x2e054,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e054,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_snoc_pcie3_2lane_s_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie3_axi_s_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_regmap_phy_mux pcie0_pipe_clk_src = {
> > ++ .reg = 0x28064,
> > ++ .clkr = {
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie0_pipe_clk_src",
> > ++ .parent_data = &(const struct clk_parent_data) {
> > ++ .index = DT_PCIE30_PHY0_PIPE_CLK,
> > ++ },
> > ++ .num_parents = 1,
> > ++ .ops = &clk_regmap_phy_mux_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_regmap_phy_mux pcie1_pipe_clk_src = {
> > ++ .reg = 0x29064,
> > ++ .clkr = {
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie1_pipe_clk_src",
> > ++ .parent_data = &(const struct clk_parent_data) {
> > ++ .index = DT_PCIE30_PHY1_PIPE_CLK,
> > ++ },
> > ++ .num_parents = 1,
> > ++ .ops = &clk_regmap_phy_mux_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_regmap_phy_mux pcie2_pipe_clk_src = {
> > ++ .reg = 0x2a064,
> > ++ .clkr = {
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie2_pipe_clk_src",
> > ++ .parent_data = &(const struct clk_parent_data) {
> > ++ .index = DT_PCIE30_PHY2_PIPE_CLK,
> > ++ },
> > ++ .num_parents = 1,
> > ++ .ops = &clk_regmap_phy_mux_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_regmap_phy_mux pcie3_pipe_clk_src = {
> > ++ .reg = 0x2b064,
> > ++ .clkr = {
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie3_pipe_clk_src",
> > ++ .parent_data = &(const struct clk_parent_data) {
> > ++ .index = DT_PCIE30_PHY3_PIPE_CLK,
> > ++ },
> > ++ .num_parents = 1,
> > ++ .ops = &clk_regmap_phy_mux_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_pcie_rchng_clk_src[] = {
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(100000000, P_GPLL0, 8, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 pcie0_rchng_clk_src = {
> > ++ .cmd_rcgr = 0x28028,
> > ++ .freq_tbl = ftbl_pcie_rchng_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie0_rchng_clk_src",
> > ++ .parent_data = gcc_xo_gpll0,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie0_rchng_clk = {
> > ++ .halt_reg = 0x28028,
> > ++ .clkr = {
> > ++ .enable_reg = 0x28028,
> > ++ .enable_mask = BIT(1),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie0_rchng_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie0_rchng_clk_src.clkr.hw
> > ++
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 pcie1_rchng_clk_src = {
> > ++ .cmd_rcgr = 0x29028,
> > ++ .freq_tbl = ftbl_pcie_rchng_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie1_rchng_clk_src",
> > ++ .parent_data = gcc_xo_gpll0,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie1_rchng_clk = {
> > ++ .halt_reg = 0x29028,
> > ++ .clkr = {
> > ++ .enable_reg = 0x29028,
> > ++ .enable_mask = BIT(1),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie1_rchng_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie1_rchng_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 pcie2_rchng_clk_src = {
> > ++ .cmd_rcgr = 0x2a028,
> > ++ .freq_tbl = ftbl_pcie_rchng_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie2_rchng_clk_src",
> > ++ .parent_data = gcc_xo_gpll0,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie2_rchng_clk = {
> > ++ .halt_reg = 0x2a028,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2a028,
> > ++ .enable_mask = BIT(1),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie2_rchng_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie2_rchng_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 pcie3_rchng_clk_src = {
> > ++ .cmd_rcgr = 0x2b028,
> > ++ .freq_tbl = ftbl_pcie_rchng_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie3_rchng_clk_src",
> > ++ .parent_data = gcc_xo_gpll0,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie3_rchng_clk = {
> > ++ .halt_reg = 0x2b028,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2b028,
> > ++ .enable_mask = BIT(1),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie3_rchng_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie3_rchng_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_pcie_aux_clk_src[] = {
> > ++ F(20000000, P_GPLL0, 10, 1, 4),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 pcie_aux_clk_src = {
> > ++ .cmd_rcgr = 0x28004,
> > ++ .freq_tbl = ftbl_pcie_aux_clk_src,
> > ++ .mnd_width = 16,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_aux_core_pi_sleep_clk_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcie_aux_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_aux_core_pi_sleep_clk,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_aux_core_pi_sleep_clk),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie0_aux_clk = {
> > ++ .halt_reg = 0x28034,
> > ++ .clkr = {
> > ++ .enable_reg = 0x28034,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie0_aux_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie_aux_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie1_aux_clk = {
> > ++ .halt_reg = 0x29034,
> > ++ .clkr = {
> > ++ .enable_reg = 0x29034,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie1_aux_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie_aux_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie2_aux_clk = {
> > ++ .halt_reg = 0x2a034,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2a034,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie2_aux_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie_aux_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie3_aux_clk = {
> > ++ .halt_reg = 0x2b034,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2b034,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie3_aux_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcie_aux_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_usb_aux_clk_src[] = {
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 usb0_aux_clk_src = {
> > ++ .cmd_rcgr = 0x2c018,
> > ++ .freq_tbl = ftbl_usb_aux_clk_src,
> > ++ .mnd_width = 16,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_core_pi_sleep_clk_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "usb0_aux_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_core_pi_sleep_clk,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_core_pi_sleep_clk),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_usb0_aux_clk = {
> > ++ .halt_reg = 0x2c048,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2c048,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_usb0_aux_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &usb0_aux_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_usb0_master_clk_src[] = {
> > ++ F(100000000, P_GPLL0, 8, 0, 0),
> > ++ F(200000000, P_GPLL0, 4, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 usb0_master_clk_src = {
> > ++ .cmd_rcgr = 0x2c004,
> > ++ .freq_tbl = ftbl_usb0_master_clk_src,
> > ++ .mnd_width = 8,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_out_main_div2_gpll0_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "usb0_master_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_out_main_div2_gpll0,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_out_main_div2_gpll0),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_usb0_master_clk = {
> > ++ .halt_reg = 0x2c044,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2c044,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_usb0_master_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &usb0_master_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_snoc_usb_clk = {
> > ++ .halt_reg = 0x2e058,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e058,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_snoc_usb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &usb0_master_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_anoc_usb_axi_clk = {
> > ++ .halt_reg = 0x2e084,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e084,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_anoc_usb_axi_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &usb0_master_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_usb0_mock_utmi_clk_src[] = {
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(60000000, P_GPLL4, 10, 1, 2),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 usb0_mock_utmi_clk_src = {
> > ++ .cmd_rcgr = 0x2c02c,
> > ++ .freq_tbl = ftbl_usb0_mock_utmi_clk_src,
> > ++ .mnd_width = 8,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll4_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "usb0_mock_utmi_clk_src",
> > ++ .parent_data = gcc_xo_gpll4_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll4_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_regmap_div usb0_mock_utmi_div_clk_src = {
> > ++ .reg = 0x2c040,
> > ++ .shift = 0,
> > ++ .width = 2,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "usb0_mock_utmi_div_clk_src",
> > ++ .parent_data = &(const struct clk_parent_data) {
> > ++ .hw = &usb0_mock_utmi_clk_src.clkr.hw,
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_regmap_div_ro_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_usb0_mock_utmi_clk = {
> > ++ .halt_reg = 0x2c04c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2c04c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_usb0_mock_utmi_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &usb0_mock_utmi_div_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_regmap_mux usb0_pipe_clk_src = {
> > ++ .reg = 0x2C074,
> > ++ .shift = 8,
> > ++ .width = 2,
> > ++ .parent_map = gcc_usb3phy_0_cc_pipe_clk_xo_map,
> > ++ .clkr = {
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "usb0_pipe_clk_src",
> > ++ .parent_data = gcc_usb3phy_0_cc_pipe_clk_xo,
> > ++ .num_parents = ARRAY_SIZE(gcc_usb3phy_0_cc_pipe_clk_xo),
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_regmap_mux_closest_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_sdcc_apps_clk_src[] = {
> > ++ F(144000, P_XO, 16, 12, 125),
> > ++ F(400000, P_XO, 12, 1, 5),
> > ++ F(24000000, P_GPLL2, 12, 1, 4),
> > ++ F(48000000, P_GPLL2, 12, 1, 2),
> > ++ F(96000000, P_GPLL2, 12, 0, 0),
> > ++ F(177777778, P_GPLL0, 4.5, 0, 0),
> > ++ F(192000000, P_GPLL2, 6, 0, 0),
> > ++ F(384000000, P_GPLL2, 3, 0, 0),
> > ++ F(400000000, P_GPLL0, 2, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 sdcc1_apps_clk_src = {
> > ++ .cmd_rcgr = 0x33004,
> > ++ .freq_tbl = ftbl_sdcc_apps_clk_src,
> > ++ .mnd_width = 8,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "sdcc1_apps_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll2_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll2_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_floor_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_sdcc1_apps_clk = {
> > ++ .halt_reg = 0x3302c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x3302c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_sdcc1_apps_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &sdcc1_apps_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_sdcc_ice_core_clk_src[] = {
> > ++ F(150000000, P_GPLL4, 8, 0, 0),
> > ++ F(300000000, P_GPLL4, 4, 0, 0),
> > ++};
> > ++
> > ++static struct clk_rcg2 sdcc1_ice_core_clk_src = {
> > ++ .cmd_rcgr = 0x33018,
> > ++ .freq_tbl = ftbl_sdcc_ice_core_clk_src,
> > ++ .mnd_width = 8,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll4_gpll0_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "sdcc1_ice_core_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll4_gpll0_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4_gpll0_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_sdcc1_ice_core_clk = {
> > ++ .halt_reg = 0x33030,
> > ++ .clkr = {
> > ++ .enable_reg = 0x33030,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_sdcc1_ice_core_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &sdcc1_ice_core_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_pcnoc_bfdcd_clk_src[] = {
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(50000000, P_GPLL0, 16, 0, 0),
> > ++ F(80000000, P_GPLL0, 10, 0, 0),
> > ++ F(100000000, P_GPLL0, 8, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 pcnoc_bfdcd_clk_src = {
> > ++ .cmd_rcgr = 0x31004,
> > ++ .freq_tbl = ftbl_pcnoc_bfdcd_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "pcnoc_bfdcd_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .flags = CLK_IS_CRITICAL,
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nsscfg_clk = {
> > ++ .halt_reg = 0x1702c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x1702c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nsscfg_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nssnoc_nsscc_clk = {
> > ++ .halt_reg = 0x17030,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17030,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nssnoc_nsscc_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nsscc_clk = {
> > ++ .halt_reg = 0x17034,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17034,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nsscc_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nssnoc_pcnoc_1_clk = {
> > ++ .halt_reg = 0x17080,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17080,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nssnoc_pcnoc_1_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_dap_ahb_clk = {
> > ++ .halt_reg = 0x2d064,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d064,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_dap_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_cfg_ahb_clk = {
> > ++ .halt_reg = 0x2d068,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d068,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_cfg_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qpic_ahb_clk = {
> > ++ .halt_reg = 0x32010,
> > ++ .clkr = {
> > ++ .enable_reg = 0x32010,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qpic_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qpic_clk = {
> > ++ .halt_reg = 0x32014,
> > ++ .clkr = {
> > ++ .enable_reg = 0x32014,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qpic_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_blsp1_ahb_clk = {
> > ++ .halt_reg = 0x01004,
> > ++ .halt_check = BRANCH_HALT_VOTED,
> > ++ .clkr = {
> > ++ .enable_reg = 0x0b004,
> > ++ .enable_mask = BIT(4),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_blsp1_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_mdio_ahb_clk = {
> > ++ .halt_reg = 0x17040,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17040,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_mdio_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_prng_ahb_clk = {
> > ++ .halt_reg = 0x13024,
> > ++ .halt_check = BRANCH_HALT_VOTED,
> > ++ .clkr = {
> > ++ .enable_reg = 0x0b004,
> > ++ .enable_mask = BIT(10),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_prng_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_uniphy0_ahb_clk = {
> > ++ .halt_reg = 0x1704c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x1704c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_uniphy0_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_uniphy1_ahb_clk = {
> > ++ .halt_reg = 0x1705c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x1705c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_uniphy1_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_uniphy2_ahb_clk = {
> > ++ .halt_reg = 0x1706c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x1706c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_uniphy2_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_cmn_12gpll_ahb_clk = {
> > ++ .halt_reg = 0x3a004,
> > ++ .clkr = {
> > ++ .enable_reg = 0x3a004,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_cmn_12gpll_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_cmn_12gpll_apu_clk = {
> > ++ .halt_reg = 0x3a00c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x3a00c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_cmn_12gpll_apu_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie0_ahb_clk = {
> > ++ .halt_reg = 0x28030,
> > ++ .clkr = {
> > ++ .enable_reg = 0x28030,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie0_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie1_ahb_clk = {
> > ++ .halt_reg = 0x29030,
> > ++ .clkr = {
> > ++ .enable_reg = 0x29030,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie1_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie2_ahb_clk = {
> > ++ .halt_reg = 0x2a030,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2a030,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie2_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcie3_ahb_clk = {
> > ++ .halt_reg = 0x2b030,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2b030,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcie3_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_usb0_phy_cfg_ahb_clk = {
> > ++ .halt_reg = 0x2c05c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2c05c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_usb0_phy_cfg_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_sdcc1_ahb_clk = {
> > ++ .halt_reg = 0x33034,
> > ++ .clkr = {
> > ++ .enable_reg = 0x33034,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_sdcc1_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &pcnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_system_noc_bfdcd_clk_src[] = {
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(133333333, P_GPLL0, 6, 0, 0),
> > ++ F(200000000, P_GPLL0, 4, 0, 0),
> > ++ F(342850000, P_GPLL4, 3.5, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 system_noc_bfdcd_clk_src = {
> > ++ .cmd_rcgr = 0x2e004,
> > ++ .freq_tbl = ftbl_system_noc_bfdcd_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll4_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "system_noc_bfdcd_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll4,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4),
> > ++ .flags = CLK_IS_CRITICAL,
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_q6ss_boot_clk = {
> > ++ .halt_reg = 0x25080,
> > ++ .halt_check = BRANCH_HALT_SKIP,
> > ++ .clkr = {
> > ++ .enable_reg = 0x25080,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_q6ss_boot_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &system_noc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nssnoc_snoc_clk = {
> > ++ .halt_reg = 0x17028,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17028,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nssnoc_snoc_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &system_noc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nssnoc_snoc_1_clk = {
> > ++ .halt_reg = 0x1707c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x1707c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nssnoc_snoc_1_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &system_noc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_etr_usb_clk = {
> > ++ .halt_reg = 0x2d060,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d060,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_etr_usb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &system_noc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_wcss_ahb_clk_src[] = {
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(133333333, P_GPLL0, 6, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 wcss_ahb_clk_src = {
> > ++ .cmd_rcgr = 0x25030,
> > ++ .freq_tbl = ftbl_wcss_ahb_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "wcss_ahb_clk_src",
> > ++ .parent_data = gcc_xo_gpll0,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_q6_ahb_clk = {
> > ++ .halt_reg = 0x25014,
> > ++ .clkr = {
> > ++ .enable_reg = 0x25014,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_q6_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &wcss_ahb_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_q6_ahb_s_clk = {
> > ++ .halt_reg = 0x25018,
> > ++ .clkr = {
> > ++ .enable_reg = 0x25018,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_q6_ahb_s_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &wcss_ahb_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_wcss_ecahb_clk = {
> > ++ .halt_reg = 0x25058,
> > ++ .clkr = {
> > ++ .enable_reg = 0x25058,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_wcss_ecahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &wcss_ahb_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_wcss_acmt_clk = {
> > ++ .halt_reg = 0x2505c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2505c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_wcss_acmt_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &wcss_ahb_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_sys_noc_wcss_ahb_clk = {
> > ++ .halt_reg = 0x2e030,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e030,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_sys_noc_wcss_ahb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &wcss_ahb_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_wcss_axi_m_clk_src[] = {
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(133333333, P_GPLL0, 6, 0, 0),
> > ++ F(266666667, P_GPLL0, 3, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 wcss_axi_m_clk_src = {
> > ++ .cmd_rcgr = 0x25078,
> > ++ .freq_tbl = ftbl_wcss_axi_m_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "wcss_axi_m_clk_src",
> > ++ .parent_data = gcc_xo_gpll0,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_anoc_wcss_axi_m_clk = {
> > ++ .halt_reg = 0x2e0a8,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e0a8,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_anoc_wcss_axi_m_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &wcss_axi_m_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_qdss_at_clk_src[] = {
> > ++ F(240000000, P_GPLL4, 5, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 qdss_at_clk_src = {
> > ++ .cmd_rcgr = 0x2d004,
> > ++ .freq_tbl = ftbl_qdss_at_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll4_gpll0_gpll0_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "qdss_at_clk_src",
> > ++ .parent_data = gcc_xo_gpll4_gpll0_gpll0_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll4_gpll0_gpll0_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_q6ss_atbm_clk = {
> > ++ .halt_reg = 0x2501c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2501c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_q6ss_atbm_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_at_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_wcss_dbg_ifc_atb_clk = {
> > ++ .halt_reg = 0x2503c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2503c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_wcss_dbg_ifc_atb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_at_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nssnoc_atb_clk = {
> > ++ .halt_reg = 0x17014,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17014,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nssnoc_atb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_at_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_at_clk = {
> > ++ .halt_reg = 0x2d038,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d038,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_at_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_at_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_sys_noc_at_clk = {
> > ++ .halt_reg = 0x2e038,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e038,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_sys_noc_at_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_at_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_pcnoc_at_clk = {
> > ++ .halt_reg = 0x31024,
> > ++ .clkr = {
> > ++ .enable_reg = 0x31024,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_pcnoc_at_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_at_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_fixed_factor gcc_eud_at_div_clk_src = {
> > ++ .mult = 1,
> > ++ .div = 6,
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_eud_at_div_clk_src",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_at_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_fixed_factor_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_usb0_eud_at_clk = {
> > ++ .halt_reg = 0x30004,
> > ++ .clkr = {
> > ++ .enable_reg = 0x30004,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_usb0_eud_at_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &gcc_eud_at_div_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_eud_at_clk = {
> > ++ .halt_reg = 0x2d06c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d06c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_eud_at_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &gcc_eud_at_div_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_qdss_stm_clk_src[] = {
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(200000000, P_GPLL0, 4, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 qdss_stm_clk_src = {
> > ++ .cmd_rcgr = 0x2d00c,
> > ++ .freq_tbl = ftbl_qdss_stm_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "qdss_stm_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_stm_clk = {
> > ++ .halt_reg = 0x2d03c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d03c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_stm_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_stm_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_sys_noc_qdss_stm_axi_clk = {
> > ++ .halt_reg = 0x2e034,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2e034,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_sys_noc_qdss_stm_axi_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_stm_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_qdss_traceclkin_clk_src[] = {
> > ++ F(300000000, P_GPLL4, 4, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 qdss_traceclkin_clk_src = {
> > ++ .cmd_rcgr = 0x2d014,
> > ++ .freq_tbl = ftbl_qdss_traceclkin_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll4_gpll0_gpll0_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "qdss_traceclkin_clk_src",
> > ++ .parent_data = gcc_xo_gpll4_gpll0_gpll0_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll4_gpll0_gpll0_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_traceclkin_clk = {
> > ++ .halt_reg = 0x2d040,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d040,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_traceclkin_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_traceclkin_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_qdss_tsctr_clk_src[] = {
> > ++ F(600000000, P_GPLL4, 2, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 qdss_tsctr_clk_src = {
> > ++ .cmd_rcgr = 0x2d01c,
> > ++ .freq_tbl = ftbl_qdss_tsctr_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll4_gpll0_gpll0_div2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "qdss_tsctr_clk_src",
> > ++ .parent_data = gcc_xo_gpll4_gpll0_gpll0_div2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll4_gpll0_gpll0_div2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_fixed_factor qdss_tsctr_div2_clk_src = {
> > ++ .mult = 1,
> > ++ .div = 2,
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "qdss_tsctr_div2_clk_src",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_tsctr_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_fixed_factor_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_q6_tsctr_1to2_clk = {
> > ++ .halt_reg = 0x25020,
> > ++ .clkr = {
> > ++ .enable_reg = 0x25020,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_q6_tsctr_1to2_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_tsctr_div2_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_wcss_dbg_ifc_nts_clk = {
> > ++ .halt_reg = 0x25040,
> > ++ .clkr = {
> > ++ .enable_reg = 0x25040,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_wcss_dbg_ifc_nts_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_tsctr_div2_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_tsctr_div2_clk = {
> > ++ .halt_reg = 0x2d044,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d044,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_tsctr_div2_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_tsctr_div2_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_uniphy_sys_clk_src[] = {
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 uniphy_sys_clk_src = {
> > ++ .cmd_rcgr = 0x17090,
> > ++ .freq_tbl = ftbl_uniphy_sys_clk_src,
> > ++ .mnd_width = 8,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "uniphy_sys_clk_src",
> > ++ .parent_data = gcc_xo_data,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_data),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 nss_ts_clk_src = {
> > ++ .cmd_rcgr = 0x17088,
> > ++ .freq_tbl = ftbl_uniphy_sys_clk_src,
> > ++ .mnd_width = 8,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "nss_ts_clk_src",
> > ++ .parent_data = gcc_xo_data,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_data),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_ts_clk = {
> > ++ .halt_reg = 0x2d078,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d078,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_ts_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &nss_ts_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_fixed_factor qdss_dap_sync_clk_src = {
> > ++ .mult = 1,
> > ++ .div = 4,
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "qdss_dap_sync_clk_src",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_tsctr_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .ops = &clk_fixed_factor_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_tsctr_div4_clk = {
> > ++ .halt_reg = 0x2d04c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d04c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_tsctr_div4_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_dap_sync_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_fixed_factor qdss_tsctr_div8_clk_src = {
> > ++ .mult = 1,
> > ++ .div = 8,
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "qdss_tsctr_div8_clk_src",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_tsctr_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .ops = &clk_fixed_factor_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nss_ts_clk = {
> > ++ .halt_reg = 0x17018,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17018,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nss_ts_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &nss_ts_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_tsctr_div8_clk = {
> > ++ .halt_reg = 0x2d050,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d050,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_tsctr_div8_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_tsctr_div8_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_fixed_factor qdss_tsctr_div16_clk_src = {
> > ++ .mult = 1,
> > ++ .div = 16,
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "qdss_tsctr_div16_clk_src",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_tsctr_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .ops = &clk_fixed_factor_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_tsctr_div16_clk = {
> > ++ .halt_reg = 0x2d054,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d054,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_tsctr_div16_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_tsctr_div16_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_q6ss_pclkdbg_clk = {
> > ++ .halt_reg = 0x25024,
> > ++ .clkr = {
> > ++ .enable_reg = 0x25024,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_q6ss_pclkdbg_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_dap_sync_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_q6ss_trig_clk = {
> > ++ .halt_reg = 0x25068,
> > ++ .clkr = {
> > ++ .enable_reg = 0x25068,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_q6ss_trig_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_dap_sync_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_wcss_dbg_ifc_apb_clk = {
> > ++ .halt_reg = 0x25038,
> > ++ .clkr = {
> > ++ .enable_reg = 0x25038,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_wcss_dbg_ifc_apb_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_dap_sync_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_wcss_dbg_ifc_dapbus_clk = {
> > ++ .halt_reg = 0x25044,
> > ++ .clkr = {
> > ++ .enable_reg = 0x25044,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_wcss_dbg_ifc_dapbus_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_dap_sync_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_dap_clk = {
> > ++ .halt_reg = 0x2d058,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d058,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_dap_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_dap_sync_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_apb2jtag_clk = {
> > ++ .halt_reg = 0x2d05c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d05c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_apb2jtag_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_dap_sync_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_fixed_factor qdss_tsctr_div3_clk_src = {
> > ++ .mult = 1,
> > ++ .div = 3,
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "qdss_tsctr_div3_clk_src",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_tsctr_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .ops = &clk_fixed_factor_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qdss_tsctr_div3_clk = {
> > ++ .halt_reg = 0x2d048,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2d048,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_qdss_tsctr_div3_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &qdss_tsctr_div3_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_qpic_io_macro_clk_src[] = {
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(100000000, P_GPLL0, 8, 0, 0),
> > ++ F(200000000, P_GPLL0, 4, 0, 0),
> > ++ F(320000000, P_GPLL0, 2.5, 0, 0),
> > ++ F(400000000, P_GPLL0, 2, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 qpic_io_macro_clk_src = {
> > ++ .cmd_rcgr = 0x32004,
> > ++ .freq_tbl = ftbl_qpic_io_macro_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "qpic_io_macro_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_qpic_io_macro_clk = {
> > ++ .halt_reg = 0x3200c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x3200c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data){
> > ++ .name = "gcc_qpic_io_macro_clk",
> > ++ .parent_hws = (const struct clk_hw *[]){
> > ++ &qpic_io_macro_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_q6_axi_clk_src[] = {
> > ++ F(533333333, P_GPLL0, 1.5, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 q6_axi_clk_src = {
> > ++ .cmd_rcgr = 0x25004,
> > ++ .freq_tbl = ftbl_q6_axi_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll2_gpll4_pi_sleep_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "q6_axi_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll2_gpll4_pi_sleep,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll2_gpll4_pi_sleep),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_q6_axim_clk = {
> > ++ .halt_reg = 0x2500c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x2500c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_q6_axim_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &q6_axi_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_wcss_q6_tbu_clk = {
> > ++ .halt_reg = 0x12050,
> > ++ .halt_check = BRANCH_HALT_DELAY,
> > ++ .clkr = {
> > ++ .enable_reg = 0xb00c,
> > ++ .enable_mask = BIT(6),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_wcss_q6_tbu_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &q6_axi_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_mem_noc_q6_axi_clk = {
> > ++ .halt_reg = 0x19010,
> > ++ .clkr = {
> > ++ .enable_reg = 0x19010,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_mem_noc_q6_axi_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &q6_axi_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_q6_axim2_clk_src[] = {
> > ++ F(342857143, P_GPLL4, 3.5, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static const struct parent_map gcc_xo_gpll0_gpll4_bias_pll_ubinc_clk_map[] = {
> > ++ { P_XO, 0 },
> > ++ { P_GPLL0, 1 },
> > ++ { P_GPLL4, 2 },
> > ++ { P_BIAS_PLL_UBI_NC_CLK, 4 },
> > ++};
> > ++
> > ++static struct clk_rcg2 q6_axim2_clk_src = {
> > ++ .cmd_rcgr = 0x25028,
> > ++ .freq_tbl = ftbl_q6_axim2_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll4_bias_pll_ubinc_clk_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "q6_axim2_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4_bias_pll_ubi_nc_clk),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_nssnoc_memnoc_bfdcd_clk_src[] = {
> > ++ F(533333333, P_GPLL0, 1.5, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 nssnoc_memnoc_bfdcd_clk_src = {
> > ++ .cmd_rcgr = 0x17004,
> > ++ .freq_tbl = ftbl_nssnoc_memnoc_bfdcd_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_aux_gpll2_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "nssnoc_memnoc_bfdcd_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_aux_gpll2,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_aux_gpll2),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nssnoc_memnoc_clk = {
> > ++ .halt_reg = 0x17024,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17024,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nssnoc_memnoc_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &nssnoc_memnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nssnoc_mem_noc_1_clk = {
> > ++ .halt_reg = 0x17084,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17084,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nssnoc_mem_noc_1_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &nssnoc_memnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nss_tbu_clk = {
> > ++ .halt_reg = 0x12040,
> > ++ .clkr = {
> > ++ .enable_reg = 0xb00c,
> > ++ .enable_mask = BIT(4),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nss_tbu_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &nssnoc_memnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_mem_noc_nssnoc_clk = {
> > ++ .halt_reg = 0x19014,
> > ++ .clkr = {
> > ++ .enable_reg = 0x19014,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_mem_noc_nssnoc_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &nssnoc_memnoc_bfdcd_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_lpass_axim_clk_src[] = {
> > ++ F(133333333, P_GPLL0, 6, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 lpass_axim_clk_src = {
> > ++ .cmd_rcgr = 0x2700c,
> > ++ .freq_tbl = ftbl_lpass_axim_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "lpass_axim_clk_src",
> > ++ .parent_data = gcc_xo_gpll0,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 lpass_sway_clk_src = {
> > ++ .cmd_rcgr = 0x27004,
> > ++ .freq_tbl = ftbl_lpass_axim_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "lpass_sway_clk_src",
> > ++ .parent_data = gcc_xo_gpll0,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_adss_pwm_clk_src[] = {
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(100000000, P_GPLL0, 8, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 adss_pwm_clk_src = {
> > ++ .cmd_rcgr = 0x1c004,
> > ++ .freq_tbl = ftbl_adss_pwm_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "adss_pwm_clk_src",
> > ++ .parent_data = gcc_xo_gpll0,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_adss_pwm_clk = {
> > ++ .halt_reg = 0x1c00c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x1c00c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_adss_pwm_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &adss_pwm_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct freq_tbl ftbl_gp1_clk_src[] = {
> > ++ F(24000000, P_XO, 1, 0, 0),
> > ++ F(200000000, P_GPLL0, 4, 0, 0),
> > ++ { }
> > ++};
> > ++
> > ++static struct clk_rcg2 gp1_clk_src = {
> > ++ .cmd_rcgr = 0x8004,
> > ++ .freq_tbl = ftbl_gp1_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_sleep_clk_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "gp1_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_sleep_clk,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_sleep_clk),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 gp2_clk_src = {
> > ++ .cmd_rcgr = 0x9004,
> > ++ .freq_tbl = ftbl_gp1_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_sleep_clk_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "gp2_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_sleep_clk,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_sleep_clk),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_rcg2 gp3_clk_src = {
> > ++ .cmd_rcgr = 0xa004,
> > ++ .freq_tbl = ftbl_gp1_clk_src,
> > ++ .hid_width = 5,
> > ++ .parent_map = gcc_xo_gpll0_gpll0_sleep_clk_map,
> > ++ .clkr.hw.init = &(struct clk_init_data) {
> > ++ .name = "gp3_clk_src",
> > ++ .parent_data = gcc_xo_gpll0_gpll0_sleep_clk,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_sleep_clk),
> > ++ .ops = &clk_rcg2_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_xo_clk_src = {
> > ++ .halt_reg = 0x34004,
> > ++ .clkr = {
> > ++ .enable_reg = 0x34004,
> > ++ .enable_mask = BIT(1),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_xo_clk_src",
> > ++ .parent_data = gcc_xo_data,
> > ++ .num_parents = ARRAY_SIZE(gcc_xo_data),
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nssnoc_xo_dcd_clk = {
> > ++ .halt_reg = 0x17074,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17074,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nssnoc_xo_dcd_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &gcc_xo_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_xo_clk = {
> > ++ .halt_reg = 0x34018,
> > ++ .clkr = {
> > ++ .enable_reg = 0x34018,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_xo_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &gcc_xo_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_uniphy0_sys_clk = {
> > ++ .halt_reg = 0x17048,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17048,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_uniphy0_sys_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &uniphy_sys_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_uniphy1_sys_clk = {
> > ++ .halt_reg = 0x17058,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17058,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_uniphy1_sys_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &uniphy_sys_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_uniphy2_sys_clk = {
> > ++ .halt_reg = 0x17068,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17068,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_uniphy2_sys_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &uniphy_sys_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_cmn_12gpll_sys_clk = {
> > ++ .halt_reg = 0x3a008,
> > ++ .clkr = {
> > ++ .enable_reg = 0x3a008,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_cmn_12gpll_sys_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &uniphy_sys_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_fixed_factor gcc_xo_div4_clk_src = {
> > ++ .mult = 1,
> > ++ .div = 4,
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_xo_div4_clk_src",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &gcc_xo_clk_src.clkr.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_fixed_factor_ops,
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nssnoc_qosgen_ref_clk = {
> > ++ .halt_reg = 0x1701c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x1701c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nssnoc_qosgen_ref_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &gcc_xo_div4_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_nssnoc_timeout_ref_clk = {
> > ++ .halt_reg = 0x17020,
> > ++ .clkr = {
> > ++ .enable_reg = 0x17020,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_nssnoc_timeout_ref_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &gcc_xo_div4_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_branch gcc_xo_div4_clk = {
> > ++ .halt_reg = 0x3401c,
> > ++ .clkr = {
> > ++ .enable_reg = 0x3401c,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data) {
> > ++ .name = "gcc_xo_div4_clk",
> > ++ .parent_hws = (const struct clk_hw *[]) {
> > ++ &gcc_xo_div4_clk_src.hw
> > ++ },
> > ++ .num_parents = 1,
> > ++ .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> > ++ .ops = &clk_branch2_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static struct clk_hw *gcc_ipq9574_hws[] = {
> > ++ &gpll0_out_main_div2.hw,
> > ++ &gcc_xo_div4_clk_src.hw,
> > ++ &qdss_dap_sync_clk_src.hw,
> > ++ &qdss_tsctr_div2_clk_src.hw,
> > ++ &qdss_tsctr_div8_clk_src.hw,
> > ++ &qdss_tsctr_div16_clk_src.hw,
> > ++ &qdss_tsctr_div3_clk_src.hw,
> > ++ &gcc_eud_at_div_clk_src.hw,
> > ++};
> > ++
> > ++static struct clk_regmap *gcc_ipq9574_clks[] = {
> > ++ [GPLL0_MAIN] = &gpll0_main.clkr,
> > ++ [GPLL0] = &gpll0.clkr,
> > ++ [GPLL4_MAIN] = &gpll4_main.clkr,
> > ++ [GPLL4] = &gpll4.clkr,
> > ++ [GPLL2_MAIN] = &gpll2_main.clkr,
> > ++ [GPLL2] = &gpll2.clkr,
> > ++ [GCC_SLEEP_CLK_SRC] = &gcc_sleep_clk_src.clkr,
> > ++ [APSS_AHB_CLK_SRC] = &apss_ahb_clk_src.clkr,
> > ++ [APSS_AXI_CLK_SRC] = &apss_axi_clk_src.clkr,
> > ++ [BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr,
> > ++ [BLSP1_QUP1_SPI_APPS_CLK_SRC] = &blsp1_qup1_spi_apps_clk_src.clkr,
> > ++ [BLSP1_QUP2_I2C_APPS_CLK_SRC] = &blsp1_qup2_i2c_apps_clk_src.clkr,
> > ++ [BLSP1_QUP2_SPI_APPS_CLK_SRC] = &blsp1_qup2_spi_apps_clk_src.clkr,
> > ++ [BLSP1_QUP3_I2C_APPS_CLK_SRC] = &blsp1_qup3_i2c_apps_clk_src.clkr,
> > ++ [BLSP1_QUP3_SPI_APPS_CLK_SRC] = &blsp1_qup3_spi_apps_clk_src.clkr,
> > ++ [BLSP1_QUP4_I2C_APPS_CLK_SRC] = &blsp1_qup4_i2c_apps_clk_src.clkr,
> > ++ [BLSP1_QUP4_SPI_APPS_CLK_SRC] = &blsp1_qup4_spi_apps_clk_src.clkr,
> > ++ [BLSP1_QUP5_I2C_APPS_CLK_SRC] = &blsp1_qup5_i2c_apps_clk_src.clkr,
> > ++ [BLSP1_QUP5_SPI_APPS_CLK_SRC] = &blsp1_qup5_spi_apps_clk_src.clkr,
> > ++ [BLSP1_QUP6_I2C_APPS_CLK_SRC] = &blsp1_qup6_i2c_apps_clk_src.clkr,
> > ++ [BLSP1_QUP6_SPI_APPS_CLK_SRC] = &blsp1_qup6_spi_apps_clk_src.clkr,
> > ++ [BLSP1_UART1_APPS_CLK_SRC] = &blsp1_uart1_apps_clk_src.clkr,
> > ++ [BLSP1_UART2_APPS_CLK_SRC] = &blsp1_uart2_apps_clk_src.clkr,
> > ++ [BLSP1_UART3_APPS_CLK_SRC] = &blsp1_uart3_apps_clk_src.clkr,
> > ++ [BLSP1_UART4_APPS_CLK_SRC] = &blsp1_uart4_apps_clk_src.clkr,
> > ++ [BLSP1_UART5_APPS_CLK_SRC] = &blsp1_uart5_apps_clk_src.clkr,
> > ++ [BLSP1_UART6_APPS_CLK_SRC] = &blsp1_uart6_apps_clk_src.clkr,
> > ++ [GCC_APSS_AHB_CLK] = &gcc_apss_ahb_clk.clkr,
> > ++ [GCC_APSS_AXI_CLK] = &gcc_apss_axi_clk.clkr,
> > ++ [GCC_BLSP1_QUP1_I2C_APPS_CLK] = &gcc_blsp1_qup1_i2c_apps_clk.clkr,
> > ++ [GCC_BLSP1_QUP1_SPI_APPS_CLK] = &gcc_blsp1_qup1_spi_apps_clk.clkr,
> > ++ [GCC_BLSP1_QUP2_I2C_APPS_CLK] = &gcc_blsp1_qup2_i2c_apps_clk.clkr,
> > ++ [GCC_BLSP1_QUP2_SPI_APPS_CLK] = &gcc_blsp1_qup2_spi_apps_clk.clkr,
> > ++ [GCC_BLSP1_QUP3_I2C_APPS_CLK] = &gcc_blsp1_qup3_i2c_apps_clk.clkr,
> > ++ [GCC_BLSP1_QUP3_SPI_APPS_CLK] = &gcc_blsp1_qup3_spi_apps_clk.clkr,
> > ++ [GCC_BLSP1_QUP4_I2C_APPS_CLK] = &gcc_blsp1_qup4_i2c_apps_clk.clkr,
> > ++ [GCC_BLSP1_QUP4_SPI_APPS_CLK] = &gcc_blsp1_qup4_spi_apps_clk.clkr,
> > ++ [GCC_BLSP1_QUP5_I2C_APPS_CLK] = &gcc_blsp1_qup5_i2c_apps_clk.clkr,
> > ++ [GCC_BLSP1_QUP5_SPI_APPS_CLK] = &gcc_blsp1_qup5_spi_apps_clk.clkr,
> > ++ [GCC_BLSP1_QUP6_I2C_APPS_CLK] = &gcc_blsp1_qup6_i2c_apps_clk.clkr,
> > ++ [GCC_BLSP1_QUP6_SPI_APPS_CLK] = &gcc_blsp1_qup6_spi_apps_clk.clkr,
> > ++ [GCC_BLSP1_UART1_APPS_CLK] = &gcc_blsp1_uart1_apps_clk.clkr,
> > ++ [GCC_BLSP1_UART2_APPS_CLK] = &gcc_blsp1_uart2_apps_clk.clkr,
> > ++ [GCC_BLSP1_UART3_APPS_CLK] = &gcc_blsp1_uart3_apps_clk.clkr,
> > ++ [GCC_BLSP1_UART4_APPS_CLK] = &gcc_blsp1_uart4_apps_clk.clkr,
> > ++ [GCC_BLSP1_UART5_APPS_CLK] = &gcc_blsp1_uart5_apps_clk.clkr,
> > ++ [GCC_BLSP1_UART6_APPS_CLK] = &gcc_blsp1_uart6_apps_clk.clkr,
> > ++ [PCIE0_AXI_M_CLK_SRC] = &pcie0_axi_m_clk_src.clkr,
> > ++ [GCC_PCIE0_AXI_M_CLK] = &gcc_pcie0_axi_m_clk.clkr,
> > ++ [PCIE1_AXI_M_CLK_SRC] = &pcie1_axi_m_clk_src.clkr,
> > ++ [GCC_PCIE1_AXI_M_CLK] = &gcc_pcie1_axi_m_clk.clkr,
> > ++ [PCIE2_AXI_M_CLK_SRC] = &pcie2_axi_m_clk_src.clkr,
> > ++ [GCC_PCIE2_AXI_M_CLK] = &gcc_pcie2_axi_m_clk.clkr,
> > ++ [PCIE3_AXI_M_CLK_SRC] = &pcie3_axi_m_clk_src.clkr,
> > ++ [GCC_PCIE3_AXI_M_CLK] = &gcc_pcie3_axi_m_clk.clkr,
> > ++ [PCIE0_AXI_S_CLK_SRC] = &pcie0_axi_s_clk_src.clkr,
> > ++ [GCC_PCIE0_AXI_S_BRIDGE_CLK] = &gcc_pcie0_axi_s_bridge_clk.clkr,
> > ++ [GCC_PCIE0_AXI_S_CLK] = &gcc_pcie0_axi_s_clk.clkr,
> > ++ [PCIE1_AXI_S_CLK_SRC] = &pcie1_axi_s_clk_src.clkr,
> > ++ [GCC_PCIE1_AXI_S_BRIDGE_CLK] = &gcc_pcie1_axi_s_bridge_clk.clkr,
> > ++ [GCC_PCIE1_AXI_S_CLK] = &gcc_pcie1_axi_s_clk.clkr,
> > ++ [PCIE2_AXI_S_CLK_SRC] = &pcie2_axi_s_clk_src.clkr,
> > ++ [GCC_PCIE2_AXI_S_BRIDGE_CLK] = &gcc_pcie2_axi_s_bridge_clk.clkr,
> > ++ [GCC_PCIE2_AXI_S_CLK] = &gcc_pcie2_axi_s_clk.clkr,
> > ++ [PCIE3_AXI_S_CLK_SRC] = &pcie3_axi_s_clk_src.clkr,
> > ++ [GCC_PCIE3_AXI_S_BRIDGE_CLK] = &gcc_pcie3_axi_s_bridge_clk.clkr,
> > ++ [GCC_PCIE3_AXI_S_CLK] = &gcc_pcie3_axi_s_clk.clkr,
> > ++ [PCIE0_PIPE_CLK_SRC] = &pcie0_pipe_clk_src.clkr,
> > ++ [PCIE1_PIPE_CLK_SRC] = &pcie1_pipe_clk_src.clkr,
> > ++ [PCIE2_PIPE_CLK_SRC] = &pcie2_pipe_clk_src.clkr,
> > ++ [PCIE3_PIPE_CLK_SRC] = &pcie3_pipe_clk_src.clkr,
> > ++ [PCIE_AUX_CLK_SRC] = &pcie_aux_clk_src.clkr,
> > ++ [GCC_PCIE0_AUX_CLK] = &gcc_pcie0_aux_clk.clkr,
> > ++ [GCC_PCIE1_AUX_CLK] = &gcc_pcie1_aux_clk.clkr,
> > ++ [GCC_PCIE2_AUX_CLK] = &gcc_pcie2_aux_clk.clkr,
> > ++ [GCC_PCIE3_AUX_CLK] = &gcc_pcie3_aux_clk.clkr,
> > ++ [PCIE0_RCHNG_CLK_SRC] = &pcie0_rchng_clk_src.clkr,
> > ++ [GCC_PCIE0_RCHNG_CLK] = &gcc_pcie0_rchng_clk.clkr,
> > ++ [PCIE1_RCHNG_CLK_SRC] = &pcie1_rchng_clk_src.clkr,
> > ++ [GCC_PCIE1_RCHNG_CLK] = &gcc_pcie1_rchng_clk.clkr,
> > ++ [PCIE2_RCHNG_CLK_SRC] = &pcie2_rchng_clk_src.clkr,
> > ++ [GCC_PCIE2_RCHNG_CLK] = &gcc_pcie2_rchng_clk.clkr,
> > ++ [PCIE3_RCHNG_CLK_SRC] = &pcie3_rchng_clk_src.clkr,
> > ++ [GCC_PCIE3_RCHNG_CLK] = &gcc_pcie3_rchng_clk.clkr,
> > ++ [GCC_PCIE0_AHB_CLK] = &gcc_pcie0_ahb_clk.clkr,
> > ++ [GCC_PCIE1_AHB_CLK] = &gcc_pcie1_ahb_clk.clkr,
> > ++ [GCC_PCIE2_AHB_CLK] = &gcc_pcie2_ahb_clk.clkr,
> > ++ [GCC_PCIE3_AHB_CLK] = &gcc_pcie3_ahb_clk.clkr,
> > ++ [USB0_AUX_CLK_SRC] = &usb0_aux_clk_src.clkr,
> > ++ [GCC_USB0_AUX_CLK] = &gcc_usb0_aux_clk.clkr,
> > ++ [USB0_MASTER_CLK_SRC] = &usb0_master_clk_src.clkr,
> > ++ [GCC_USB0_MASTER_CLK] = &gcc_usb0_master_clk.clkr,
> > ++ [GCC_SNOC_USB_CLK] = &gcc_snoc_usb_clk.clkr,
> > ++ [GCC_ANOC_USB_AXI_CLK] = &gcc_anoc_usb_axi_clk.clkr,
> > ++ [USB0_MOCK_UTMI_CLK_SRC] = &usb0_mock_utmi_clk_src.clkr,
> > ++ [USB0_MOCK_UTMI_DIV_CLK_SRC] = &usb0_mock_utmi_div_clk_src.clkr,
> > ++ [GCC_USB0_MOCK_UTMI_CLK] = &gcc_usb0_mock_utmi_clk.clkr,
> > ++ [USB0_PIPE_CLK_SRC] = &usb0_pipe_clk_src.clkr,
> > ++ [GCC_USB0_PHY_CFG_AHB_CLK] = &gcc_usb0_phy_cfg_ahb_clk.clkr,
> > ++ [SDCC1_APPS_CLK_SRC] = &sdcc1_apps_clk_src.clkr,
> > ++ [GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr,
> > ++ [SDCC1_ICE_CORE_CLK_SRC] = &sdcc1_ice_core_clk_src.clkr,
> > ++ [GCC_SDCC1_ICE_CORE_CLK] = &gcc_sdcc1_ice_core_clk.clkr,
> > ++ [GCC_SDCC1_AHB_CLK] = &gcc_sdcc1_ahb_clk.clkr,
> > ++ [PCNOC_BFDCD_CLK_SRC] = &pcnoc_bfdcd_clk_src.clkr,
> > ++ [GCC_NSSCFG_CLK] = &gcc_nsscfg_clk.clkr,
> > ++ [GCC_NSSNOC_NSSCC_CLK] = &gcc_nssnoc_nsscc_clk.clkr,
> > ++ [GCC_NSSCC_CLK] = &gcc_nsscc_clk.clkr,
> > ++ [GCC_NSSNOC_PCNOC_1_CLK] = &gcc_nssnoc_pcnoc_1_clk.clkr,
> > ++ [GCC_QDSS_DAP_AHB_CLK] = &gcc_qdss_dap_ahb_clk.clkr,
> > ++ [GCC_QDSS_CFG_AHB_CLK] = &gcc_qdss_cfg_ahb_clk.clkr,
> > ++ [GCC_QPIC_AHB_CLK] = &gcc_qpic_ahb_clk.clkr,
> > ++ [GCC_QPIC_CLK] = &gcc_qpic_clk.clkr,
> > ++ [GCC_BLSP1_AHB_CLK] = &gcc_blsp1_ahb_clk.clkr,
> > ++ [GCC_MDIO_AHB_CLK] = &gcc_mdio_ahb_clk.clkr,
> > ++ [GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr,
> > ++ [GCC_UNIPHY0_AHB_CLK] = &gcc_uniphy0_ahb_clk.clkr,
> > ++ [GCC_UNIPHY1_AHB_CLK] = &gcc_uniphy1_ahb_clk.clkr,
> > ++ [GCC_UNIPHY2_AHB_CLK] = &gcc_uniphy2_ahb_clk.clkr,
> > ++ [GCC_CMN_12GPLL_AHB_CLK] = &gcc_cmn_12gpll_ahb_clk.clkr,
> > ++ [GCC_CMN_12GPLL_APU_CLK] = &gcc_cmn_12gpll_apu_clk.clkr,
> > ++ [SYSTEM_NOC_BFDCD_CLK_SRC] = &system_noc_bfdcd_clk_src.clkr,
> > ++ [GCC_NSSNOC_SNOC_CLK] = &gcc_nssnoc_snoc_clk.clkr,
> > ++ [GCC_NSSNOC_SNOC_1_CLK] = &gcc_nssnoc_snoc_1_clk.clkr,
> > ++ [GCC_QDSS_ETR_USB_CLK] = &gcc_qdss_etr_usb_clk.clkr,
> > ++ [WCSS_AHB_CLK_SRC] = &wcss_ahb_clk_src.clkr,
> > ++ [GCC_Q6_AHB_CLK] = &gcc_q6_ahb_clk.clkr,
> > ++ [GCC_Q6_AHB_S_CLK] = &gcc_q6_ahb_s_clk.clkr,
> > ++ [GCC_WCSS_ECAHB_CLK] = &gcc_wcss_ecahb_clk.clkr,
> > ++ [GCC_WCSS_ACMT_CLK] = &gcc_wcss_acmt_clk.clkr,
> > ++ [GCC_SYS_NOC_WCSS_AHB_CLK] = &gcc_sys_noc_wcss_ahb_clk.clkr,
> > ++ [WCSS_AXI_M_CLK_SRC] = &wcss_axi_m_clk_src.clkr,
> > ++ [GCC_ANOC_WCSS_AXI_M_CLK] = &gcc_anoc_wcss_axi_m_clk.clkr,
> > ++ [QDSS_AT_CLK_SRC] = &qdss_at_clk_src.clkr,
> > ++ [GCC_Q6SS_ATBM_CLK] = &gcc_q6ss_atbm_clk.clkr,
> > ++ [GCC_WCSS_DBG_IFC_ATB_CLK] = &gcc_wcss_dbg_ifc_atb_clk.clkr,
> > ++ [GCC_NSSNOC_ATB_CLK] = &gcc_nssnoc_atb_clk.clkr,
> > ++ [GCC_QDSS_AT_CLK] = &gcc_qdss_at_clk.clkr,
> > ++ [GCC_SYS_NOC_AT_CLK] = &gcc_sys_noc_at_clk.clkr,
> > ++ [GCC_PCNOC_AT_CLK] = &gcc_pcnoc_at_clk.clkr,
> > ++ [GCC_USB0_EUD_AT_CLK] = &gcc_usb0_eud_at_clk.clkr,
> > ++ [GCC_QDSS_EUD_AT_CLK] = &gcc_qdss_eud_at_clk.clkr,
> > ++ [QDSS_STM_CLK_SRC] = &qdss_stm_clk_src.clkr,
> > ++ [GCC_QDSS_STM_CLK] = &gcc_qdss_stm_clk.clkr,
> > ++ [GCC_SYS_NOC_QDSS_STM_AXI_CLK] = &gcc_sys_noc_qdss_stm_axi_clk.clkr,
> > ++ [QDSS_TRACECLKIN_CLK_SRC] = &qdss_traceclkin_clk_src.clkr,
> > ++ [GCC_QDSS_TRACECLKIN_CLK] = &gcc_qdss_traceclkin_clk.clkr,
> > ++ [QDSS_TSCTR_CLK_SRC] = &qdss_tsctr_clk_src.clkr,
> > ++ [GCC_Q6_TSCTR_1TO2_CLK] = &gcc_q6_tsctr_1to2_clk.clkr,
> > ++ [GCC_WCSS_DBG_IFC_NTS_CLK] = &gcc_wcss_dbg_ifc_nts_clk.clkr,
> > ++ [GCC_QDSS_TSCTR_DIV2_CLK] = &gcc_qdss_tsctr_div2_clk.clkr,
> > ++ [GCC_QDSS_TS_CLK] = &gcc_qdss_ts_clk.clkr,
> > ++ [GCC_QDSS_TSCTR_DIV4_CLK] = &gcc_qdss_tsctr_div4_clk.clkr,
> > ++ [GCC_NSS_TS_CLK] = &gcc_nss_ts_clk.clkr,
> > ++ [GCC_QDSS_TSCTR_DIV8_CLK] = &gcc_qdss_tsctr_div8_clk.clkr,
> > ++ [GCC_QDSS_TSCTR_DIV16_CLK] = &gcc_qdss_tsctr_div16_clk.clkr,
> > ++ [GCC_Q6SS_PCLKDBG_CLK] = &gcc_q6ss_pclkdbg_clk.clkr,
> > ++ [GCC_Q6SS_TRIG_CLK] = &gcc_q6ss_trig_clk.clkr,
> > ++ [GCC_WCSS_DBG_IFC_APB_CLK] = &gcc_wcss_dbg_ifc_apb_clk.clkr,
> > ++ [GCC_WCSS_DBG_IFC_DAPBUS_CLK] = &gcc_wcss_dbg_ifc_dapbus_clk.clkr,
> > ++ [GCC_QDSS_DAP_CLK] = &gcc_qdss_dap_clk.clkr,
> > ++ [GCC_QDSS_APB2JTAG_CLK] = &gcc_qdss_apb2jtag_clk.clkr,
> > ++ [GCC_QDSS_TSCTR_DIV3_CLK] = &gcc_qdss_tsctr_div3_clk.clkr,
> > ++ [QPIC_IO_MACRO_CLK_SRC] = &qpic_io_macro_clk_src.clkr,
> > ++ [GCC_QPIC_IO_MACRO_CLK] = &gcc_qpic_io_macro_clk.clkr,
> > ++ [Q6_AXI_CLK_SRC] = &q6_axi_clk_src.clkr,
> > ++ [GCC_Q6_AXIM_CLK] = &gcc_q6_axim_clk.clkr,
> > ++ [GCC_WCSS_Q6_TBU_CLK] = &gcc_wcss_q6_tbu_clk.clkr,
> > ++ [GCC_MEM_NOC_Q6_AXI_CLK] = &gcc_mem_noc_q6_axi_clk.clkr,
> > ++ [Q6_AXIM2_CLK_SRC] = &q6_axim2_clk_src.clkr,
> > ++ [NSSNOC_MEMNOC_BFDCD_CLK_SRC] = &nssnoc_memnoc_bfdcd_clk_src.clkr,
> > ++ [GCC_NSSNOC_MEMNOC_CLK] = &gcc_nssnoc_memnoc_clk.clkr,
> > ++ [GCC_NSSNOC_MEM_NOC_1_CLK] = &gcc_nssnoc_mem_noc_1_clk.clkr,
> > ++ [GCC_NSS_TBU_CLK] = &gcc_nss_tbu_clk.clkr,
> > ++ [GCC_MEM_NOC_NSSNOC_CLK] = &gcc_mem_noc_nssnoc_clk.clkr,
> > ++ [LPASS_AXIM_CLK_SRC] = &lpass_axim_clk_src.clkr,
> > ++ [LPASS_SWAY_CLK_SRC] = &lpass_sway_clk_src.clkr,
> > ++ [ADSS_PWM_CLK_SRC] = &adss_pwm_clk_src.clkr,
> > ++ [GCC_ADSS_PWM_CLK] = &gcc_adss_pwm_clk.clkr,
> > ++ [GP1_CLK_SRC] = &gp1_clk_src.clkr,
> > ++ [GP2_CLK_SRC] = &gp2_clk_src.clkr,
> > ++ [GP3_CLK_SRC] = &gp3_clk_src.clkr,
> > ++ [GCC_XO_CLK_SRC] = &gcc_xo_clk_src.clkr,
> > ++ [GCC_NSSNOC_XO_DCD_CLK] = &gcc_nssnoc_xo_dcd_clk.clkr,
> > ++ [GCC_XO_CLK] = &gcc_xo_clk.clkr,
> > ++ [GCC_NSSNOC_QOSGEN_REF_CLK] = &gcc_nssnoc_qosgen_ref_clk.clkr,
> > ++ [GCC_NSSNOC_TIMEOUT_REF_CLK] = &gcc_nssnoc_timeout_ref_clk.clkr,
> > ++ [GCC_XO_DIV4_CLK] = &gcc_xo_div4_clk.clkr,
> > ++ [GCC_UNIPHY0_SYS_CLK] = &gcc_uniphy0_sys_clk.clkr,
> > ++ [GCC_UNIPHY1_SYS_CLK] = &gcc_uniphy1_sys_clk.clkr,
> > ++ [GCC_UNIPHY2_SYS_CLK] = &gcc_uniphy2_sys_clk.clkr,
> > ++ [GCC_CMN_12GPLL_SYS_CLK] = &gcc_cmn_12gpll_sys_clk.clkr,
> > ++ [GCC_Q6SS_BOOT_CLK] = &gcc_q6ss_boot_clk.clkr,
> > ++ [UNIPHY_SYS_CLK_SRC] = &uniphy_sys_clk_src.clkr,
> > ++ [NSS_TS_CLK_SRC] = &nss_ts_clk_src.clkr,
> > ++ [GCC_ANOC_PCIE0_1LANE_M_CLK] = &gcc_anoc_pcie0_1lane_m_clk.clkr,
> > ++ [GCC_ANOC_PCIE1_1LANE_M_CLK] = &gcc_anoc_pcie1_1lane_m_clk.clkr,
> > ++ [GCC_ANOC_PCIE2_2LANE_M_CLK] = &gcc_anoc_pcie2_2lane_m_clk.clkr,
> > ++ [GCC_ANOC_PCIE3_2LANE_M_CLK] = &gcc_anoc_pcie3_2lane_m_clk.clkr,
> > ++ [GCC_SNOC_PCIE0_1LANE_S_CLK] = &gcc_snoc_pcie0_1lane_s_clk.clkr,
> > ++ [GCC_SNOC_PCIE1_1LANE_S_CLK] = &gcc_snoc_pcie1_1lane_s_clk.clkr,
> > ++ [GCC_SNOC_PCIE2_2LANE_S_CLK] = &gcc_snoc_pcie2_2lane_s_clk.clkr,
> > ++ [GCC_SNOC_PCIE3_2LANE_S_CLK] = &gcc_snoc_pcie3_2lane_s_clk.clkr,
> > ++};
> > ++
> > ++static const struct qcom_reset_map gcc_ipq9574_resets[] = {
> > ++ [GCC_ADSS_BCR] = { 0x1c000, 0 },
> > ++ [GCC_ANOC0_TBU_BCR] = { 0x1203c, 0 },
> > ++ [GCC_ANOC1_TBU_BCR] = { 0x1204c, 0 },
> > ++ [GCC_ANOC_BCR] = { 0x2e074, 0 },
> > ++ [GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR] = { 0x38000, 0 },
> > ++ [GCC_APSS_TCU_BCR] = { 0x12014, 0 },
> > ++ [GCC_BLSP1_BCR] = { 0x01000, 0 },
> > ++ [GCC_BLSP1_QUP1_BCR] = { 0x02000, 0 },
> > ++ [GCC_BLSP1_QUP2_BCR] = { 0x03000, 0 },
> > ++ [GCC_BLSP1_QUP3_BCR] = { 0x04000, 0 },
> > ++ [GCC_BLSP1_QUP4_BCR] = { 0x05000, 0 },
> > ++ [GCC_BLSP1_QUP5_BCR] = { 0x06000, 0 },
> > ++ [GCC_BLSP1_QUP6_BCR] = { 0x07000, 0 },
> > ++ [GCC_BLSP1_UART1_BCR] = { 0x02028, 0 },
> > ++ [GCC_BLSP1_UART2_BCR] = { 0x03028, 0 },
> > ++ [GCC_BLSP1_UART3_BCR] = { 0x04028, 0 },
> > ++ [GCC_BLSP1_UART4_BCR] = { 0x05028, 0 },
> > ++ [GCC_BLSP1_UART5_BCR] = { 0x06028, 0 },
> > ++ [GCC_BLSP1_UART6_BCR] = { 0x07028, 0 },
> > ++ [GCC_BOOT_ROM_BCR] = { 0x13028, 0 },
> > ++ [GCC_CMN_BLK_BCR] = { 0x3a000, 0 },
> > ++ [GCC_CMN_BLK_AHB_ARES] = { 0x3a010, 0 },
> > ++ [GCC_CMN_BLK_SYS_ARES] = { 0x3a010, 1 },
> > ++ [GCC_CMN_BLK_APU_ARES] = { 0x3a010, 2 },
> > ++ [GCC_DCC_BCR] = { 0x35000, 0 },
> > ++ [GCC_DDRSS_BCR] = { 0x11000, 0 },
> > ++ [GCC_IMEM_BCR] = { 0x0e000, 0 },
> > ++ [GCC_LPASS_BCR] = { 0x27000, 0 },
> > ++ [GCC_MDIO_BCR] = { 0x1703c, 0 },
> > ++ [GCC_MPM_BCR] = { 0x37000, 0 },
> > ++ [GCC_MSG_RAM_BCR] = { 0x26000, 0 },
> > ++ [GCC_NSS_BCR] = { 0x17000, 0 },
> > ++ [GCC_NSS_TBU_BCR] = { 0x12044, 0 },
> > ++ [GCC_NSSNOC_MEMNOC_1_ARES] = { 0x17038, 13 },
> > ++ [GCC_NSSNOC_PCNOC_1_ARES] = { 0x17038, 12 },
> > ++ [GCC_NSSNOC_SNOC_1_ARES] = { 0x17038, 11 },
> > ++ [GCC_NSSNOC_XO_DCD_ARES] = { 0x17038, 10 },
> > ++ [GCC_NSSNOC_TS_ARES] = { 0x17038, 9 },
> > ++ [GCC_NSSCC_ARES] = { 0x17038, 8 },
> > ++ [GCC_NSSNOC_NSSCC_ARES] = { 0x17038, 7 },
> > ++ [GCC_NSSNOC_ATB_ARES] = { 0x17038, 6 },
> > ++ [GCC_NSSNOC_MEMNOC_ARES] = { 0x17038, 5 },
> > ++ [GCC_NSSNOC_QOSGEN_REF_ARES] = { 0x17038, 4 },
> > ++ [GCC_NSSNOC_SNOC_ARES] = { 0x17038, 3 },
> > ++ [GCC_NSSNOC_TIMEOUT_REF_ARES] = { 0x17038, 2 },
> > ++ [GCC_NSS_CFG_ARES] = { 0x17038, 1 },
> > ++ [GCC_UBI0_DBG_ARES] = { 0x17038, 0 },
> > ++ [GCC_PCIE0PHY_PHY_BCR] = { 0x2805c, 0 },
> > ++ [GCC_PCIE0_AHB_ARES] = { 0x28058, 7 },
> > ++ [GCC_PCIE0_AUX_ARES] = { 0x28058, 6 },
> > ++ [GCC_PCIE0_AXI_M_ARES] = { 0x28058, 5 },
> > ++ [GCC_PCIE0_AXI_M_STICKY_ARES] = { 0x28058, 4 },
> > ++ [GCC_PCIE0_AXI_S_ARES] = { 0x28058, 3 },
> > ++ [GCC_PCIE0_AXI_S_STICKY_ARES] = { 0x28058, 2 },
> > ++ [GCC_PCIE0_CORE_STICKY_ARES] = { 0x28058, 1 },
> > ++ [GCC_PCIE0_PIPE_ARES] = { 0x28058, 0 },
> > ++ [GCC_PCIE1_AHB_ARES] = { 0x29058, 7 },
> > ++ [GCC_PCIE1_AUX_ARES] = { 0x29058, 6 },
> > ++ [GCC_PCIE1_AXI_M_ARES] = { 0x29058, 5 },
> > ++ [GCC_PCIE1_AXI_M_STICKY_ARES] = { 0x29058, 4 },
> > ++ [GCC_PCIE1_AXI_S_ARES] = { 0x29058, 3 },
> > ++ [GCC_PCIE1_AXI_S_STICKY_ARES] = { 0x29058, 2 },
> > ++ [GCC_PCIE1_CORE_STICKY_ARES] = { 0x29058, 1 },
> > ++ [GCC_PCIE1_PIPE_ARES] = { 0x29058, 0 },
> > ++ [GCC_PCIE2_AHB_ARES] = { 0x2a058, 7 },
> > ++ [GCC_PCIE2_AUX_ARES] = { 0x2a058, 6 },
> > ++ [GCC_PCIE2_AXI_M_ARES] = { 0x2a058, 5 },
> > ++ [GCC_PCIE2_AXI_M_STICKY_ARES] = { 0x2a058, 4 },
> > ++ [GCC_PCIE2_AXI_S_ARES] = { 0x2a058, 3 },
> > ++ [GCC_PCIE2_AXI_S_STICKY_ARES] = { 0x2a058, 2 },
> > ++ [GCC_PCIE2_CORE_STICKY_ARES] = { 0x2a058, 1 },
> > ++ [GCC_PCIE2_PIPE_ARES] = { 0x2a058, 0 },
> > ++ [GCC_PCIE3_AHB_ARES] = { 0x2b058, 7 },
> > ++ [GCC_PCIE3_AUX_ARES] = { 0x2b058, 6 },
> > ++ [GCC_PCIE3_AXI_M_ARES] = { 0x2b058, 5 },
> > ++ [GCC_PCIE3_AXI_M_STICKY_ARES] = { 0x2b058, 4 },
> > ++ [GCC_PCIE3_AXI_S_ARES] = { 0x2b058, 3 },
> > ++ [GCC_PCIE3_AXI_S_STICKY_ARES] = { 0x2b058, 2 },
> > ++ [GCC_PCIE3_CORE_STICKY_ARES] = { 0x2b058, 1 },
> > ++ [GCC_PCIE3_PIPE_ARES] = { 0x2b058, 0 },
> > ++ [GCC_PCIE0_BCR] = { 0x28000, 0 },
> > ++ [GCC_PCIE0_LINK_DOWN_BCR] = { 0x28054, 0 },
> > ++ [GCC_PCIE0_PHY_BCR] = { 0x28060, 0 },
> > ++ [GCC_PCIE1_BCR] = { 0x29000, 0 },
> > ++ [GCC_PCIE1_LINK_DOWN_BCR] = { 0x29054, 0 },
> > ++ [GCC_PCIE1_PHY_BCR] = { 0x29060, 0 },
> > ++ [GCC_PCIE1PHY_PHY_BCR] = { 0x2905c, 0 },
> > ++ [GCC_PCIE2_BCR] = { 0x2a000, 0 },
> > ++ [GCC_PCIE2_LINK_DOWN_BCR] = { 0x2a054, 0 },
> > ++ [GCC_PCIE2_PHY_BCR] = { 0x2a060, 0 },
> > ++ [GCC_PCIE2PHY_PHY_BCR] = { 0x2a05c, 0 },
> > ++ [GCC_PCIE3_BCR] = { 0x2b000, 0 },
> > ++ [GCC_PCIE3_LINK_DOWN_BCR] = { 0x2b054, 0 },
> > ++ [GCC_PCIE3PHY_PHY_BCR] = { 0x2b05c, 0 },
> > ++ [GCC_PCIE3_PHY_BCR] = { 0x2b060, 0 },
> > ++ [GCC_PCNOC_BCR] = { 0x31000, 0 },
> > ++ [GCC_PCNOC_BUS_TIMEOUT0_BCR] = { 0x31030, 0 },
> > ++ [GCC_PCNOC_BUS_TIMEOUT1_BCR] = { 0x31038, 0 },
> > ++ [GCC_PCNOC_BUS_TIMEOUT2_BCR] = { 0x31040, 0 },
> > ++ [GCC_PCNOC_BUS_TIMEOUT3_BCR] = { 0x31048, 0 },
> > ++ [GCC_PCNOC_BUS_TIMEOUT4_BCR] = { 0x31050, 0 },
> > ++ [GCC_PCNOC_BUS_TIMEOUT5_BCR] = { 0x31058, 0 },
> > ++ [GCC_PCNOC_BUS_TIMEOUT6_BCR] = { 0x31060, 0 },
> > ++ [GCC_PCNOC_BUS_TIMEOUT7_BCR] = { 0x31068, 0 },
> > ++ [GCC_PCNOC_BUS_TIMEOUT8_BCR] = { 0x31070, 0 },
> > ++ [GCC_PCNOC_BUS_TIMEOUT9_BCR] = { 0x31078, 0 },
> > ++ [GCC_PCNOC_TBU_BCR] = { 0x12034, 0 },
> > ++ [GCC_PRNG_BCR] = { 0x13020, 0 },
> > ++ [GCC_Q6SS_DBG_ARES] = { 0x2506c, 4 },
> > ++ [GCC_Q6_AHB_ARES] = { 0x2506c, 3 },
> > ++ [GCC_Q6_AHB_S_ARES] = { 0x2506c, 2 },
> > ++ [GCC_Q6_AXIM2_ARES] = { 0x2506c, 1 },
> > ++ [GCC_Q6_AXIM_ARES] = { 0x2506c, 0 },
> > ++ [GCC_QDSS_BCR] = { 0x2d000, 0 },
> > ++ [GCC_QPIC_BCR] = { 0x32000, 0 },
> > ++ [GCC_QPIC_AHB_ARES] = { 0x3201c, 1 },
> > ++ [GCC_QPIC_ARES] = { 0x3201c, 0 },
> > ++ [GCC_QUSB2_0_PHY_BCR] = { 0x2c068, 0 },
> > ++ [GCC_RBCPR_BCR] = { 0x39000, 0 },
> > ++ [GCC_RBCPR_MX_BCR] = { 0x39014, 0 },
> > ++ [GCC_SDCC_BCR] = { 0x33000, 0 },
> > ++ [GCC_SEC_CTRL_BCR] = { 0x1a000, 0 },
> > ++ [GCC_SMMU_CFG_BCR] = { 0x1202c, 0 },
> > ++ [GCC_SNOC_BCR] = { 0x2e000, 0 },
> > ++ [GCC_SPDM_BCR] = { 0x36000, 0 },
> > ++ [GCC_TCSR_BCR] = { 0x3d000, 0 },
> > ++ [GCC_TLMM_BCR] = { 0x3e000, 0 },
> > ++ [GCC_TME_BCR] = { 0x10000, 0 },
> > ++ [GCC_UNIPHY0_BCR] = { 0x17044, 0 },
> > ++ [GCC_UNIPHY0_SYS_RESET] = { 0x17050, 0 },
> > ++ [GCC_UNIPHY0_AHB_RESET] = { 0x17050, 1 },
> > ++ [GCC_UNIPHY0_XPCS_RESET] = { 0x17050, 2 },
> > ++ [GCC_UNIPHY1_SYS_RESET] = { 0x17060, 0 },
> > ++ [GCC_UNIPHY1_AHB_RESET] = { 0x17060, 1 },
> > ++ [GCC_UNIPHY1_XPCS_RESET] = { 0x17060, 2 },
> > ++ [GCC_UNIPHY2_SYS_RESET] = { 0x17070, 0 },
> > ++ [GCC_UNIPHY2_AHB_RESET] = { 0x17070, 1 },
> > ++ [GCC_UNIPHY2_XPCS_RESET] = { 0x17070, 2 },
> > ++ [GCC_UNIPHY1_BCR] = { 0x17054, 0 },
> > ++ [GCC_UNIPHY2_BCR] = { 0x17064, 0 },
> > ++ [GCC_USB0_PHY_BCR] = { 0x2c06c, 0 },
> > ++ [GCC_USB3PHY_0_PHY_BCR] = { 0x2c070, 0 },
> > ++ [GCC_USB_BCR] = { 0x2c000, 0 },
> > ++ [GCC_USB_MISC_RESET] = { 0x2c064, 0 },
> > ++ [GCC_WCSSAON_RESET] = { 0x25074, 0 },
> > ++ [GCC_WCSS_ACMT_ARES] = { 0x25070, 5 },
> > ++ [GCC_WCSS_AHB_S_ARES] = { 0x25070, 4 },
> > ++ [GCC_WCSS_AXI_M_ARES] = { 0x25070, 3 },
> > ++ [GCC_WCSS_BCR] = { 0x18004, 0 },
> > ++ [GCC_WCSS_DBG_ARES] = { 0x25070, 2 },
> > ++ [GCC_WCSS_DBG_BDG_ARES] = { 0x25070, 1 },
> > ++ [GCC_WCSS_ECAHB_ARES] = { 0x25070, 0 },
> > ++ [GCC_WCSS_Q6_BCR] = { 0x18000, 0 },
> > ++ [GCC_WCSS_Q6_TBU_BCR] = { 0x12054, 0 },
> > ++};
> > ++
> > ++static const struct of_device_id gcc_ipq9574_match_table[] = {
> > ++ { .compatible = "qcom,ipq9574-gcc" },
> > ++ { }
> > ++};
> > ++MODULE_DEVICE_TABLE(of, gcc_ipq9574_match_table);
> > ++
> > ++static const struct regmap_config gcc_ipq9574_regmap_config = {
> > ++ .reg_bits = 32,
> > ++ .reg_stride = 4,
> > ++ .val_bits = 32,
> > ++ .max_register = 0x7fffc,
> > ++ .fast_io = true,
> > ++};
> > ++
> > ++static const struct qcom_cc_desc gcc_ipq9574_desc = {
> > ++ .config = &gcc_ipq9574_regmap_config,
> > ++ .clks = gcc_ipq9574_clks,
> > ++ .num_clks = ARRAY_SIZE(gcc_ipq9574_clks),
> > ++ .resets = gcc_ipq9574_resets,
> > ++ .num_resets = ARRAY_SIZE(gcc_ipq9574_resets),
> > ++ .clk_hws = gcc_ipq9574_hws,
> > ++ .num_clk_hws = ARRAY_SIZE(gcc_ipq9574_hws),
> > ++};
> > ++
> > ++static int gcc_ipq9574_probe(struct platform_device *pdev)
> > ++{
> > ++ return qcom_cc_probe(pdev, &gcc_ipq9574_desc);
> > ++}
> > ++
> > ++static struct platform_driver gcc_ipq9574_driver = {
> > ++ .probe = gcc_ipq9574_probe,
> > ++ .driver = {
> > ++ .name = "qcom,gcc-ipq9574",
> > ++ .of_match_table = gcc_ipq9574_match_table,
> > ++ },
> > ++};
> > ++
> > ++static int __init gcc_ipq9574_init(void)
> > ++{
> > ++ return platform_driver_register(&gcc_ipq9574_driver);
> > ++}
> > ++core_initcall(gcc_ipq9574_init);
> > ++
> > ++static void __exit gcc_ipq9574_exit(void)
> > ++{
> > ++ platform_driver_unregister(&gcc_ipq9574_driver);
> > ++}
> > ++module_exit(gcc_ipq9574_exit);
> > ++
> > ++MODULE_DESCRIPTION("Qualcomm Technologies, Inc. GCC IPQ9574 Driver");
> > ++MODULE_LICENSE("GPL");
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0008-dt-bindings-clock-Add-ipq9574-clock-and-reset-defini.patch b/target/linux/ipq95xx/patches-6.1/0008-dt-bindings-clock-Add-ipq9574-clock-and-reset-defini.patch
> > new file mode 100644
> > index 0000000000..abdea2ab2b
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0008-dt-bindings-clock-Add-ipq9574-clock-and-reset-defini.patch
> > @@ -0,0 +1,482 @@
> > +From 471b2c31ee9c3a0ab76f9ccb6a514cb9713afd80 Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Thu, 16 Mar 2023 12:59:35 +0530
> > +Subject: [PATCH 08/41] dt-bindings: clock: Add ipq9574 clock and reset
> > + definitions
> > +
> > +Add clock and reset ID definitions for ipq9574
> > +
> > +Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> > +Co-developed-by: Anusha Rao <quic_anusha at quicinc.com>
> > +Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230316072940.29137-2-quic_devipriy@quicinc.com
> > +---
> > + .../bindings/clock/qcom,ipq9574-gcc.yaml | 61 +++++
> > + include/dt-bindings/clock/qcom,ipq9574-gcc.h | 213 ++++++++++++++++++
> > + include/dt-bindings/reset/qcom,ipq9574-gcc.h | 164 ++++++++++++++
> > + 3 files changed, 438 insertions(+)
> > + create mode 100644 Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
> > + create mode 100644 include/dt-bindings/clock/qcom,ipq9574-gcc.h
> > + create mode 100644 include/dt-bindings/reset/qcom,ipq9574-gcc.h
> > +
> > +diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
> > +new file mode 100644
> > +index 000000000000..afc68eb9d7cc
> > +--- /dev/null
> > ++++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
> > +@@ -0,0 +1,61 @@
> > ++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > ++%YAML 1.2
> > ++---
> > ++$id: http://devicetree.org/schemas/clock/qcom,ipq9574-gcc.yaml#
> > ++$schema: http://devicetree.org/meta-schemas/core.yaml#
> > ++
> > ++title: Qualcomm Global Clock & Reset Controller on IPQ9574
> > ++
> > ++maintainers:
> > ++ - Anusha Rao <quic_anusha at quicinc.com>
> > ++
> > ++description: |
> > ++ Qualcomm global clock control module provides the clocks, resets and power
> > ++ domains on IPQ9574
> > ++
> > ++ See also::
> > ++ include/dt-bindings/clock/qcom,ipq9574-gcc.h
> > ++ include/dt-bindings/reset/qcom,ipq9574-gcc.h
> > ++
> > ++properties:
> > ++ compatible:
> > ++ const: qcom,ipq9574-gcc
> > ++
> > ++ clocks:
> > ++ items:
> > ++ - description: Board XO source
> > ++ - description: Sleep clock source
> > ++ - description: Bias PLL ubi clock source
> > ++ - description: PCIE30 PHY0 pipe clock source
> > ++ - description: PCIE30 PHY1 pipe clock source
> > ++ - description: PCIE30 PHY2 pipe clock source
> > ++ - description: PCIE30 PHY3 pipe clock source
> > ++ - description: USB3 PHY pipe clock source
> > ++
> > ++required:
> > ++ - compatible
> > ++ - clocks
> > ++
> > ++allOf:
> > ++ - $ref: qcom,gcc.yaml#
> > ++
> > ++unevaluatedProperties: false
> > ++
> > ++examples:
> > ++ - |
> > ++ clock-controller at 1800000 {
> > ++ compatible = "qcom,ipq9574-gcc";
> > ++ reg = <0x01800000 0x80000>;
> > ++ clocks = <&xo_board_clk>,
> > ++ <&sleep_clk>,
> > ++ <&bias_pll_ubi_nc_clk>,
> > ++ <&pcie30_phy0_pipe_clk>,
> > ++ <&pcie30_phy1_pipe_clk>,
> > ++ <&pcie30_phy2_pipe_clk>,
> > ++ <&pcie30_phy3_pipe_clk>,
> > ++ <&usb3phy_0_cc_pipe_clk>;
> > ++ #clock-cells = <1>;
> > ++ #reset-cells = <1>;
> > ++ #power-domain-cells = <1>;
> > ++ };
> > ++...
> > +diff --git a/include/dt-bindings/clock/qcom,ipq9574-gcc.h b/include/dt-bindings/clock/qcom,ipq9574-gcc.h
> > +new file mode 100644
> > +index 000000000000..5a2961bfe893
> > +--- /dev/null
> > ++++ b/include/dt-bindings/clock/qcom,ipq9574-gcc.h
> > +@@ -0,0 +1,213 @@
> > ++/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> > ++/*
> > ++ * Copyright (c) 2018-2023 The Linux Foundation. All rights reserved.
> > ++ */
> > ++
> > ++#ifndef _DT_BINDINGS_CLOCK_IPQ_GCC_9574_H
> > ++#define _DT_BINDINGS_CLOCK_IPQ_GCC_9574_H
> > ++
> > ++#define GPLL0_MAIN 0
> > ++#define GPLL0 1
> > ++#define GPLL2_MAIN 2
> > ++#define GPLL2 3
> > ++#define GPLL4_MAIN 4
> > ++#define GPLL4 5
> > ++#define GCC_SLEEP_CLK_SRC 6
> > ++#define APSS_AHB_CLK_SRC 7
> > ++#define APSS_AXI_CLK_SRC 8
> > ++#define BLSP1_QUP1_I2C_APPS_CLK_SRC 9
> > ++#define BLSP1_QUP1_SPI_APPS_CLK_SRC 10
> > ++#define BLSP1_QUP2_I2C_APPS_CLK_SRC 11
> > ++#define BLSP1_QUP2_SPI_APPS_CLK_SRC 12
> > ++#define BLSP1_QUP3_I2C_APPS_CLK_SRC 13
> > ++#define BLSP1_QUP3_SPI_APPS_CLK_SRC 14
> > ++#define BLSP1_QUP4_I2C_APPS_CLK_SRC 15
> > ++#define BLSP1_QUP4_SPI_APPS_CLK_SRC 16
> > ++#define BLSP1_QUP5_I2C_APPS_CLK_SRC 17
> > ++#define BLSP1_QUP5_SPI_APPS_CLK_SRC 18
> > ++#define BLSP1_QUP6_I2C_APPS_CLK_SRC 19
> > ++#define BLSP1_QUP6_SPI_APPS_CLK_SRC 20
> > ++#define BLSP1_UART1_APPS_CLK_SRC 21
> > ++#define BLSP1_UART2_APPS_CLK_SRC 22
> > ++#define BLSP1_UART3_APPS_CLK_SRC 23
> > ++#define BLSP1_UART4_APPS_CLK_SRC 24
> > ++#define BLSP1_UART5_APPS_CLK_SRC 25
> > ++#define BLSP1_UART6_APPS_CLK_SRC 26
> > ++#define GCC_APSS_AHB_CLK 27
> > ++#define GCC_APSS_AXI_CLK 28
> > ++#define GCC_BLSP1_QUP1_I2C_APPS_CLK 29
> > ++#define GCC_BLSP1_QUP1_SPI_APPS_CLK 30
> > ++#define GCC_BLSP1_QUP2_I2C_APPS_CLK 31
> > ++#define GCC_BLSP1_QUP2_SPI_APPS_CLK 32
> > ++#define GCC_BLSP1_QUP3_I2C_APPS_CLK 33
> > ++#define GCC_BLSP1_QUP3_SPI_APPS_CLK 34
> > ++#define GCC_BLSP1_QUP4_I2C_APPS_CLK 35
> > ++#define GCC_BLSP1_QUP4_SPI_APPS_CLK 36
> > ++#define GCC_BLSP1_QUP5_I2C_APPS_CLK 37
> > ++#define GCC_BLSP1_QUP5_SPI_APPS_CLK 38
> > ++#define GCC_BLSP1_QUP6_I2C_APPS_CLK 39
> > ++#define GCC_BLSP1_QUP6_SPI_APPS_CLK 40
> > ++#define GCC_BLSP1_UART1_APPS_CLK 41
> > ++#define GCC_BLSP1_UART2_APPS_CLK 42
> > ++#define GCC_BLSP1_UART3_APPS_CLK 43
> > ++#define GCC_BLSP1_UART4_APPS_CLK 44
> > ++#define GCC_BLSP1_UART5_APPS_CLK 45
> > ++#define GCC_BLSP1_UART6_APPS_CLK 46
> > ++#define PCIE0_AXI_M_CLK_SRC 47
> > ++#define GCC_PCIE0_AXI_M_CLK 48
> > ++#define PCIE1_AXI_M_CLK_SRC 49
> > ++#define GCC_PCIE1_AXI_M_CLK 50
> > ++#define PCIE2_AXI_M_CLK_SRC 51
> > ++#define GCC_PCIE2_AXI_M_CLK 52
> > ++#define PCIE3_AXI_M_CLK_SRC 53
> > ++#define GCC_PCIE3_AXI_M_CLK 54
> > ++#define PCIE0_AXI_S_CLK_SRC 55
> > ++#define GCC_PCIE0_AXI_S_BRIDGE_CLK 56
> > ++#define GCC_PCIE0_AXI_S_CLK 57
> > ++#define PCIE1_AXI_S_CLK_SRC 58
> > ++#define GCC_PCIE1_AXI_S_BRIDGE_CLK 59
> > ++#define GCC_PCIE1_AXI_S_CLK 60
> > ++#define PCIE2_AXI_S_CLK_SRC 61
> > ++#define GCC_PCIE2_AXI_S_BRIDGE_CLK 62
> > ++#define GCC_PCIE2_AXI_S_CLK 63
> > ++#define PCIE3_AXI_S_CLK_SRC 64
> > ++#define GCC_PCIE3_AXI_S_BRIDGE_CLK 65
> > ++#define GCC_PCIE3_AXI_S_CLK 66
> > ++#define PCIE0_PIPE_CLK_SRC 67
> > ++#define PCIE1_PIPE_CLK_SRC 68
> > ++#define PCIE2_PIPE_CLK_SRC 69
> > ++#define PCIE3_PIPE_CLK_SRC 70
> > ++#define PCIE_AUX_CLK_SRC 71
> > ++#define GCC_PCIE0_AUX_CLK 72
> > ++#define GCC_PCIE1_AUX_CLK 73
> > ++#define GCC_PCIE2_AUX_CLK 74
> > ++#define GCC_PCIE3_AUX_CLK 75
> > ++#define PCIE0_RCHNG_CLK_SRC 76
> > ++#define GCC_PCIE0_RCHNG_CLK 77
> > ++#define PCIE1_RCHNG_CLK_SRC 78
> > ++#define GCC_PCIE1_RCHNG_CLK 79
> > ++#define PCIE2_RCHNG_CLK_SRC 80
> > ++#define GCC_PCIE2_RCHNG_CLK 81
> > ++#define PCIE3_RCHNG_CLK_SRC 82
> > ++#define GCC_PCIE3_RCHNG_CLK 83
> > ++#define GCC_PCIE0_AHB_CLK 84
> > ++#define GCC_PCIE1_AHB_CLK 85
> > ++#define GCC_PCIE2_AHB_CLK 86
> > ++#define GCC_PCIE3_AHB_CLK 87
> > ++#define USB0_AUX_CLK_SRC 88
> > ++#define GCC_USB0_AUX_CLK 89
> > ++#define USB0_MASTER_CLK_SRC 90
> > ++#define GCC_USB0_MASTER_CLK 91
> > ++#define GCC_SNOC_USB_CLK 92
> > ++#define GCC_ANOC_USB_AXI_CLK 93
> > ++#define USB0_MOCK_UTMI_CLK_SRC 94
> > ++#define USB0_MOCK_UTMI_DIV_CLK_SRC 95
> > ++#define GCC_USB0_MOCK_UTMI_CLK 96
> > ++#define USB0_PIPE_CLK_SRC 97
> > ++#define GCC_USB0_PHY_CFG_AHB_CLK 98
> > ++#define SDCC1_APPS_CLK_SRC 99
> > ++#define GCC_SDCC1_APPS_CLK 100
> > ++#define SDCC1_ICE_CORE_CLK_SRC 101
> > ++#define GCC_SDCC1_ICE_CORE_CLK 102
> > ++#define GCC_SDCC1_AHB_CLK 103
> > ++#define PCNOC_BFDCD_CLK_SRC 104
> > ++#define GCC_NSSCFG_CLK 105
> > ++#define GCC_NSSNOC_NSSCC_CLK 106
> > ++#define GCC_NSSCC_CLK 107
> > ++#define GCC_NSSNOC_PCNOC_1_CLK 108
> > ++#define GCC_QDSS_DAP_AHB_CLK 109
> > ++#define GCC_QDSS_CFG_AHB_CLK 110
> > ++#define GCC_QPIC_AHB_CLK 111
> > ++#define GCC_QPIC_CLK 112
> > ++#define GCC_BLSP1_AHB_CLK 113
> > ++#define GCC_MDIO_AHB_CLK 114
> > ++#define GCC_PRNG_AHB_CLK 115
> > ++#define GCC_UNIPHY0_AHB_CLK 116
> > ++#define GCC_UNIPHY1_AHB_CLK 117
> > ++#define GCC_UNIPHY2_AHB_CLK 118
> > ++#define GCC_CMN_12GPLL_AHB_CLK 119
> > ++#define GCC_CMN_12GPLL_APU_CLK 120
> > ++#define SYSTEM_NOC_BFDCD_CLK_SRC 121
> > ++#define GCC_NSSNOC_SNOC_CLK 122
> > ++#define GCC_NSSNOC_SNOC_1_CLK 123
> > ++#define GCC_QDSS_ETR_USB_CLK 124
> > ++#define WCSS_AHB_CLK_SRC 125
> > ++#define GCC_Q6_AHB_CLK 126
> > ++#define GCC_Q6_AHB_S_CLK 127
> > ++#define GCC_WCSS_ECAHB_CLK 128
> > ++#define GCC_WCSS_ACMT_CLK 129
> > ++#define GCC_SYS_NOC_WCSS_AHB_CLK 130
> > ++#define WCSS_AXI_M_CLK_SRC 131
> > ++#define GCC_ANOC_WCSS_AXI_M_CLK 132
> > ++#define QDSS_AT_CLK_SRC 133
> > ++#define GCC_Q6SS_ATBM_CLK 134
> > ++#define GCC_WCSS_DBG_IFC_ATB_CLK 135
> > ++#define GCC_NSSNOC_ATB_CLK 136
> > ++#define GCC_QDSS_AT_CLK 137
> > ++#define GCC_SYS_NOC_AT_CLK 138
> > ++#define GCC_PCNOC_AT_CLK 139
> > ++#define GCC_USB0_EUD_AT_CLK 140
> > ++#define GCC_QDSS_EUD_AT_CLK 141
> > ++#define QDSS_STM_CLK_SRC 142
> > ++#define GCC_QDSS_STM_CLK 143
> > ++#define GCC_SYS_NOC_QDSS_STM_AXI_CLK 144
> > ++#define QDSS_TRACECLKIN_CLK_SRC 145
> > ++#define GCC_QDSS_TRACECLKIN_CLK 146
> > ++#define QDSS_TSCTR_CLK_SRC 147
> > ++#define GCC_Q6_TSCTR_1TO2_CLK 148
> > ++#define GCC_WCSS_DBG_IFC_NTS_CLK 149
> > ++#define GCC_QDSS_TSCTR_DIV2_CLK 150
> > ++#define GCC_QDSS_TS_CLK 151
> > ++#define GCC_QDSS_TSCTR_DIV4_CLK 152
> > ++#define GCC_NSS_TS_CLK 153
> > ++#define GCC_QDSS_TSCTR_DIV8_CLK 154
> > ++#define GCC_QDSS_TSCTR_DIV16_CLK 155
> > ++#define GCC_Q6SS_PCLKDBG_CLK 156
> > ++#define GCC_Q6SS_TRIG_CLK 157
> > ++#define GCC_WCSS_DBG_IFC_APB_CLK 158
> > ++#define GCC_WCSS_DBG_IFC_DAPBUS_CLK 159
> > ++#define GCC_QDSS_DAP_CLK 160
> > ++#define GCC_QDSS_APB2JTAG_CLK 161
> > ++#define GCC_QDSS_TSCTR_DIV3_CLK 162
> > ++#define QPIC_IO_MACRO_CLK_SRC 163
> > ++#define GCC_QPIC_IO_MACRO_CLK 164
> > ++#define Q6_AXI_CLK_SRC 165
> > ++#define GCC_Q6_AXIM_CLK 166
> > ++#define GCC_WCSS_Q6_TBU_CLK 167
> > ++#define GCC_MEM_NOC_Q6_AXI_CLK 168
> > ++#define Q6_AXIM2_CLK_SRC 169
> > ++#define NSSNOC_MEMNOC_BFDCD_CLK_SRC 170
> > ++#define GCC_NSSNOC_MEMNOC_CLK 171
> > ++#define GCC_NSSNOC_MEM_NOC_1_CLK 172
> > ++#define GCC_NSS_TBU_CLK 173
> > ++#define GCC_MEM_NOC_NSSNOC_CLK 174
> > ++#define LPASS_AXIM_CLK_SRC 175
> > ++#define LPASS_SWAY_CLK_SRC 176
> > ++#define ADSS_PWM_CLK_SRC 177
> > ++#define GCC_ADSS_PWM_CLK 178
> > ++#define GP1_CLK_SRC 179
> > ++#define GP2_CLK_SRC 180
> > ++#define GP3_CLK_SRC 181
> > ++#define DDRSS_SMS_SLOW_CLK_SRC 182
> > ++#define GCC_XO_CLK_SRC 183
> > ++#define GCC_XO_CLK 184
> > ++#define GCC_NSSNOC_QOSGEN_REF_CLK 185
> > ++#define GCC_NSSNOC_TIMEOUT_REF_CLK 186
> > ++#define GCC_XO_DIV4_CLK 187
> > ++#define GCC_UNIPHY0_SYS_CLK 188
> > ++#define GCC_UNIPHY1_SYS_CLK 189
> > ++#define GCC_UNIPHY2_SYS_CLK 190
> > ++#define GCC_CMN_12GPLL_SYS_CLK 191
> > ++#define GCC_NSSNOC_XO_DCD_CLK 192
> > ++#define GCC_Q6SS_BOOT_CLK 193
> > ++#define UNIPHY_SYS_CLK_SRC 194
> > ++#define NSS_TS_CLK_SRC 195
> > ++#define GCC_ANOC_PCIE0_1LANE_M_CLK 196
> > ++#define GCC_ANOC_PCIE1_1LANE_M_CLK 197
> > ++#define GCC_ANOC_PCIE2_2LANE_M_CLK 198
> > ++#define GCC_ANOC_PCIE3_2LANE_M_CLK 199
> > ++#define GCC_SNOC_PCIE0_1LANE_S_CLK 200
> > ++#define GCC_SNOC_PCIE1_1LANE_S_CLK 201
> > ++#define GCC_SNOC_PCIE2_2LANE_S_CLK 202
> > ++#define GCC_SNOC_PCIE3_2LANE_S_CLK 203
> > ++#endif
> > +diff --git a/include/dt-bindings/reset/qcom,ipq9574-gcc.h b/include/dt-bindings/reset/qcom,ipq9574-gcc.h
> > +new file mode 100644
> > +index 000000000000..d01dc6a24cf1
> > +--- /dev/null
> > ++++ b/include/dt-bindings/reset/qcom,ipq9574-gcc.h
> > +@@ -0,0 +1,164 @@
> > ++/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> > ++/*
> > ++ * Copyright (c) 2018-2023, The Linux Foundation. All rights reserved.
> > ++ */
> > ++
> > ++#ifndef _DT_BINDINGS_RESET_IPQ_GCC_9574_H
> > ++#define _DT_BINDINGS_RESET_IPQ_GCC_9574_H
> > ++
> > ++#define GCC_ADSS_BCR 0
> > ++#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR 1
> > ++#define GCC_BLSP1_BCR 2
> > ++#define GCC_BLSP1_QUP1_BCR 3
> > ++#define GCC_BLSP1_QUP2_BCR 4
> > ++#define GCC_BLSP1_QUP3_BCR 5
> > ++#define GCC_BLSP1_QUP4_BCR 6
> > ++#define GCC_BLSP1_QUP5_BCR 7
> > ++#define GCC_BLSP1_QUP6_BCR 8
> > ++#define GCC_BLSP1_UART1_BCR 9
> > ++#define GCC_BLSP1_UART2_BCR 10
> > ++#define GCC_BLSP1_UART3_BCR 11
> > ++#define GCC_BLSP1_UART4_BCR 12
> > ++#define GCC_BLSP1_UART5_BCR 13
> > ++#define GCC_BLSP1_UART6_BCR 14
> > ++#define GCC_BOOT_ROM_BCR 15
> > ++#define GCC_MDIO_BCR 16
> > ++#define GCC_NSS_BCR 17
> > ++#define GCC_NSS_TBU_BCR 18
> > ++#define GCC_PCIE0_BCR 19
> > ++#define GCC_PCIE0_LINK_DOWN_BCR 20
> > ++#define GCC_PCIE0_PHY_BCR 21
> > ++#define GCC_PCIE0PHY_PHY_BCR 22
> > ++#define GCC_PCIE1_BCR 23
> > ++#define GCC_PCIE1_LINK_DOWN_BCR 24
> > ++#define GCC_PCIE1_PHY_BCR 25
> > ++#define GCC_PCIE1PHY_PHY_BCR 26
> > ++#define GCC_PCIE2_BCR 27
> > ++#define GCC_PCIE2_LINK_DOWN_BCR 28
> > ++#define GCC_PCIE2_PHY_BCR 29
> > ++#define GCC_PCIE2PHY_PHY_BCR 30
> > ++#define GCC_PCIE3_BCR 31
> > ++#define GCC_PCIE3_LINK_DOWN_BCR 32
> > ++#define GCC_PCIE3_PHY_BCR 33
> > ++#define GCC_PCIE3PHY_PHY_BCR 34
> > ++#define GCC_PRNG_BCR 35
> > ++#define GCC_QUSB2_0_PHY_BCR 36
> > ++#define GCC_SDCC_BCR 37
> > ++#define GCC_TLMM_BCR 38
> > ++#define GCC_UNIPHY0_BCR 39
> > ++#define GCC_UNIPHY1_BCR 40
> > ++#define GCC_UNIPHY2_BCR 41
> > ++#define GCC_USB0_PHY_BCR 42
> > ++#define GCC_USB3PHY_0_PHY_BCR 43
> > ++#define GCC_USB_BCR 44
> > ++#define GCC_ANOC0_TBU_BCR 45
> > ++#define GCC_ANOC1_TBU_BCR 46
> > ++#define GCC_ANOC_BCR 47
> > ++#define GCC_APSS_TCU_BCR 48
> > ++#define GCC_CMN_BLK_BCR 49
> > ++#define GCC_CMN_BLK_AHB_ARES 50
> > ++#define GCC_CMN_BLK_SYS_ARES 51
> > ++#define GCC_CMN_BLK_APU_ARES 52
> > ++#define GCC_DCC_BCR 53
> > ++#define GCC_DDRSS_BCR 54
> > ++#define GCC_IMEM_BCR 55
> > ++#define GCC_LPASS_BCR 56
> > ++#define GCC_MPM_BCR 57
> > ++#define GCC_MSG_RAM_BCR 58
> > ++#define GCC_NSSNOC_MEMNOC_1_ARES 59
> > ++#define GCC_NSSNOC_PCNOC_1_ARES 60
> > ++#define GCC_NSSNOC_SNOC_1_ARES 61
> > ++#define GCC_NSSNOC_XO_DCD_ARES 62
> > ++#define GCC_NSSNOC_TS_ARES 63
> > ++#define GCC_NSSCC_ARES 64
> > ++#define GCC_NSSNOC_NSSCC_ARES 65
> > ++#define GCC_NSSNOC_ATB_ARES 66
> > ++#define GCC_NSSNOC_MEMNOC_ARES 67
> > ++#define GCC_NSSNOC_QOSGEN_REF_ARES 68
> > ++#define GCC_NSSNOC_SNOC_ARES 69
> > ++#define GCC_NSSNOC_TIMEOUT_REF_ARES 70
> > ++#define GCC_NSS_CFG_ARES 71
> > ++#define GCC_UBI0_DBG_ARES 72
> > ++#define GCC_PCIE0_AHB_ARES 73
> > ++#define GCC_PCIE0_AUX_ARES 74
> > ++#define GCC_PCIE0_AXI_M_ARES 75
> > ++#define GCC_PCIE0_AXI_M_STICKY_ARES 76
> > ++#define GCC_PCIE0_AXI_S_ARES 77
> > ++#define GCC_PCIE0_AXI_S_STICKY_ARES 78
> > ++#define GCC_PCIE0_CORE_STICKY_ARES 79
> > ++#define GCC_PCIE0_PIPE_ARES 80
> > ++#define GCC_PCIE1_AHB_ARES 81
> > ++#define GCC_PCIE1_AUX_ARES 82
> > ++#define GCC_PCIE1_AXI_M_ARES 83
> > ++#define GCC_PCIE1_AXI_M_STICKY_ARES 84
> > ++#define GCC_PCIE1_AXI_S_ARES 85
> > ++#define GCC_PCIE1_AXI_S_STICKY_ARES 86
> > ++#define GCC_PCIE1_CORE_STICKY_ARES 87
> > ++#define GCC_PCIE1_PIPE_ARES 88
> > ++#define GCC_PCIE2_AHB_ARES 89
> > ++#define GCC_PCIE2_AUX_ARES 90
> > ++#define GCC_PCIE2_AXI_M_ARES 91
> > ++#define GCC_PCIE2_AXI_M_STICKY_ARES 92
> > ++#define GCC_PCIE2_AXI_S_ARES 93
> > ++#define GCC_PCIE2_AXI_S_STICKY_ARES 94
> > ++#define GCC_PCIE2_CORE_STICKY_ARES 95
> > ++#define GCC_PCIE2_PIPE_ARES 96
> > ++#define GCC_PCIE3_AHB_ARES 97
> > ++#define GCC_PCIE3_AUX_ARES 98
> > ++#define GCC_PCIE3_AXI_M_ARES 99
> > ++#define GCC_PCIE3_AXI_M_STICKY_ARES 100
> > ++#define GCC_PCIE3_AXI_S_ARES 101
> > ++#define GCC_PCIE3_AXI_S_STICKY_ARES 102
> > ++#define GCC_PCIE3_CORE_STICKY_ARES 103
> > ++#define GCC_PCIE3_PIPE_ARES 104
> > ++#define GCC_PCNOC_BCR 105
> > ++#define GCC_PCNOC_BUS_TIMEOUT0_BCR 106
> > ++#define GCC_PCNOC_BUS_TIMEOUT1_BCR 107
> > ++#define GCC_PCNOC_BUS_TIMEOUT2_BCR 108
> > ++#define GCC_PCNOC_BUS_TIMEOUT3_BCR 109
> > ++#define GCC_PCNOC_BUS_TIMEOUT4_BCR 110
> > ++#define GCC_PCNOC_BUS_TIMEOUT5_BCR 111
> > ++#define GCC_PCNOC_BUS_TIMEOUT6_BCR 112
> > ++#define GCC_PCNOC_BUS_TIMEOUT7_BCR 113
> > ++#define GCC_PCNOC_BUS_TIMEOUT8_BCR 114
> > ++#define GCC_PCNOC_BUS_TIMEOUT9_BCR 115
> > ++#define GCC_PCNOC_TBU_BCR 116
> > ++#define GCC_Q6SS_DBG_ARES 117
> > ++#define GCC_Q6_AHB_ARES 118
> > ++#define GCC_Q6_AHB_S_ARES 119
> > ++#define GCC_Q6_AXIM2_ARES 120
> > ++#define GCC_Q6_AXIM_ARES 121
> > ++#define GCC_QDSS_BCR 122
> > ++#define GCC_QPIC_BCR 123
> > ++#define GCC_QPIC_AHB_ARES 124
> > ++#define GCC_QPIC_ARES 125
> > ++#define GCC_RBCPR_BCR 126
> > ++#define GCC_RBCPR_MX_BCR 127
> > ++#define GCC_SEC_CTRL_BCR 128
> > ++#define GCC_SMMU_CFG_BCR 129
> > ++#define GCC_SNOC_BCR 130
> > ++#define GCC_SPDM_BCR 131
> > ++#define GCC_TME_BCR 132
> > ++#define GCC_UNIPHY0_SYS_RESET 133
> > ++#define GCC_UNIPHY0_AHB_RESET 134
> > ++#define GCC_UNIPHY0_XPCS_RESET 135
> > ++#define GCC_UNIPHY1_SYS_RESET 136
> > ++#define GCC_UNIPHY1_AHB_RESET 137
> > ++#define GCC_UNIPHY1_XPCS_RESET 138
> > ++#define GCC_UNIPHY2_SYS_RESET 139
> > ++#define GCC_UNIPHY2_AHB_RESET 140
> > ++#define GCC_UNIPHY2_XPCS_RESET 141
> > ++#define GCC_USB_MISC_RESET 142
> > ++#define GCC_WCSSAON_RESET 143
> > ++#define GCC_WCSS_ACMT_ARES 144
> > ++#define GCC_WCSS_AHB_S_ARES 145
> > ++#define GCC_WCSS_AXI_M_ARES 146
> > ++#define GCC_WCSS_BCR 147
> > ++#define GCC_WCSS_DBG_ARES 148
> > ++#define GCC_WCSS_DBG_BDG_ARES 149
> > ++#define GCC_WCSS_ECAHB_ARES 150
> > ++#define GCC_WCSS_Q6_BCR 151
> > ++#define GCC_WCSS_Q6_TBU_BCR 152
> > ++#define GCC_TCSR_BCR 153
> > ++
> > ++#endif
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0009-pinctrl-qcom-Add-IPQ9574-pinctrl-driver.patch b/target/linux/ipq95xx/patches-6.1/0009-pinctrl-qcom-Add-IPQ9574-pinctrl-driver.patch
> > new file mode 100644
> > index 0000000000..087f776677
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0009-pinctrl-qcom-Add-IPQ9574-pinctrl-driver.patch
> > @@ -0,0 +1,889 @@
> > +From 1d437190764f774f61f1ab389b4c074e0f69bbb1 Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Thu, 16 Mar 2023 12:59:38 +0530
> > +Subject: [PATCH 09/41] pinctrl: qcom: Add IPQ9574 pinctrl driver
> > +
> > +Add pinctrl definitions for the TLMM of IPQ9574
> > +
> > +Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> > +Co-developed-by: Anusha Rao <quic_anusha at quicinc.com>
> > +Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Link: https://lore.kernel.org/r/20230316072940.29137-5-quic_devipriy@quicinc.com
> > +Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> > +---
> > + drivers/pinctrl/qcom/Kconfig | 11 +
> > + drivers/pinctrl/qcom/Makefile | 1 +
> > + drivers/pinctrl/qcom/pinctrl-ipq9574.c | 826 +++++++++++++++++++++++++
> > + 3 files changed, 838 insertions(+)
> > + create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq9574.c
> > +
> > +diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> > +index 9dc2d803a586..c8b6a4d90f3c 100644
> > +--- a/drivers/pinctrl/qcom/Kconfig
> > ++++ b/drivers/pinctrl/qcom/Kconfig
> > +@@ -70,6 +70,17 @@ config PINCTRL_IPQ6018
> > + Qualcomm Technologies Inc. IPQ6018 platform. Select this for
> > + IPQ6018.
> > +
> > ++config PINCTRL_IPQ9574
> > ++ tristate "Qualcomm Technologies, Inc. IPQ9574 pin controller driver"
> > ++ depends on OF || COMPILE_TEST
> > ++ depends on ARM64 || COMPILE_TEST
> > ++ depends on PINCTRL_MSM
> > ++ help
> > ++ This is the pinctrl, pinmux, pinconf and gpiolib driver for
> > ++ the Qualcomm Technologies Inc. TLMM block found on the
> > ++ Qualcomm Technologies Inc. IPQ9574 platform. Select this for
> > ++ IPQ9574.
> > ++
> > + config PINCTRL_MSM8226
> > + tristate "Qualcomm 8226 pin controller driver"
> > + depends on OF
> > +diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
> > +index 8269a1db8794..79302d518ff3 100644
> > +--- a/drivers/pinctrl/qcom/Makefile
> > ++++ b/drivers/pinctrl/qcom/Makefile
> > +@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o
> > + obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o
> > + obj-$(CONFIG_PINCTRL_IPQ8074) += pinctrl-ipq8074.o
> > + obj-$(CONFIG_PINCTRL_IPQ6018) += pinctrl-ipq6018.o
> > ++obj-$(CONFIG_PINCTRL_IPQ9574) += pinctrl-ipq9574.o
> > + obj-$(CONFIG_PINCTRL_MSM8226) += pinctrl-msm8226.o
> > + obj-$(CONFIG_PINCTRL_MSM8660) += pinctrl-msm8660.o
> > + obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.o
> > +diff --git a/drivers/pinctrl/qcom/pinctrl-ipq9574.c b/drivers/pinctrl/qcom/pinctrl-ipq9574.c
> > +new file mode 100644
> > +index 000000000000..7f057b62475f
> > +--- /dev/null
> > ++++ b/drivers/pinctrl/qcom/pinctrl-ipq9574.c
> > +@@ -0,0 +1,826 @@
> > ++// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > ++/*
> > ++ * Copyright (c) 2023 The Linux Foundation. All rights reserved.
> > ++ */
> > ++
> > ++#include <linux/module.h>
> > ++#include <linux/of.h>
> > ++#include <linux/platform_device.h>
> > ++#include <linux/pinctrl/pinctrl.h>
> > ++
> > ++#include "pinctrl-msm.h"
> > ++
> > ++#define FUNCTION(fname) \
> > ++ [msm_mux_##fname] = { \
> > ++ .name = #fname, \
> > ++ .groups = fname##_groups, \
> > ++ .ngroups = ARRAY_SIZE(fname##_groups), \
> > ++ }
> > ++
> > ++#define REG_SIZE 0x1000
> > ++#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
> > ++ { \
> > ++ .name = "gpio" #id, \
> > ++ .pins = gpio##id##_pins, \
> > ++ .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \
> > ++ .funcs = (int[]){ \
> > ++ msm_mux_gpio, /* gpio mode */ \
> > ++ msm_mux_##f1, \
> > ++ msm_mux_##f2, \
> > ++ msm_mux_##f3, \
> > ++ msm_mux_##f4, \
> > ++ msm_mux_##f5, \
> > ++ msm_mux_##f6, \
> > ++ msm_mux_##f7, \
> > ++ msm_mux_##f8, \
> > ++ msm_mux_##f9 \
> > ++ }, \
> > ++ .nfuncs = 10, \
> > ++ .ctl_reg = REG_SIZE * id, \
> > ++ .io_reg = 0x4 + REG_SIZE * id, \
> > ++ .intr_cfg_reg = 0x8 + REG_SIZE * id, \
> > ++ .intr_status_reg = 0xc + REG_SIZE * id, \
> > ++ .intr_target_reg = 0x8 + REG_SIZE * id, \
> > ++ .mux_bit = 2, \
> > ++ .pull_bit = 0, \
> > ++ .drv_bit = 6, \
> > ++ .oe_bit = 9, \
> > ++ .in_bit = 0, \
> > ++ .out_bit = 1, \
> > ++ .intr_enable_bit = 0, \
> > ++ .intr_status_bit = 0, \
> > ++ .intr_target_bit = 5, \
> > ++ .intr_target_kpss_val = 3, \
> > ++ .intr_raw_status_bit = 4, \
> > ++ .intr_polarity_bit = 1, \
> > ++ .intr_detection_bit = 2, \
> > ++ .intr_detection_width = 2, \
> > ++ }
> > ++
> > ++static const struct pinctrl_pin_desc ipq9574_pins[] = {
> > ++ PINCTRL_PIN(0, "GPIO_0"),
> > ++ PINCTRL_PIN(1, "GPIO_1"),
> > ++ PINCTRL_PIN(2, "GPIO_2"),
> > ++ PINCTRL_PIN(3, "GPIO_3"),
> > ++ PINCTRL_PIN(4, "GPIO_4"),
> > ++ PINCTRL_PIN(5, "GPIO_5"),
> > ++ PINCTRL_PIN(6, "GPIO_6"),
> > ++ PINCTRL_PIN(7, "GPIO_7"),
> > ++ PINCTRL_PIN(8, "GPIO_8"),
> > ++ PINCTRL_PIN(9, "GPIO_9"),
> > ++ PINCTRL_PIN(10, "GPIO_10"),
> > ++ PINCTRL_PIN(11, "GPIO_11"),
> > ++ PINCTRL_PIN(12, "GPIO_12"),
> > ++ PINCTRL_PIN(13, "GPIO_13"),
> > ++ PINCTRL_PIN(14, "GPIO_14"),
> > ++ PINCTRL_PIN(15, "GPIO_15"),
> > ++ PINCTRL_PIN(16, "GPIO_16"),
> > ++ PINCTRL_PIN(17, "GPIO_17"),
> > ++ PINCTRL_PIN(18, "GPIO_18"),
> > ++ PINCTRL_PIN(19, "GPIO_19"),
> > ++ PINCTRL_PIN(20, "GPIO_20"),
> > ++ PINCTRL_PIN(21, "GPIO_21"),
> > ++ PINCTRL_PIN(22, "GPIO_22"),
> > ++ PINCTRL_PIN(23, "GPIO_23"),
> > ++ PINCTRL_PIN(24, "GPIO_24"),
> > ++ PINCTRL_PIN(25, "GPIO_25"),
> > ++ PINCTRL_PIN(26, "GPIO_26"),
> > ++ PINCTRL_PIN(27, "GPIO_27"),
> > ++ PINCTRL_PIN(28, "GPIO_28"),
> > ++ PINCTRL_PIN(29, "GPIO_29"),
> > ++ PINCTRL_PIN(30, "GPIO_30"),
> > ++ PINCTRL_PIN(31, "GPIO_31"),
> > ++ PINCTRL_PIN(32, "GPIO_32"),
> > ++ PINCTRL_PIN(33, "GPIO_33"),
> > ++ PINCTRL_PIN(34, "GPIO_34"),
> > ++ PINCTRL_PIN(35, "GPIO_35"),
> > ++ PINCTRL_PIN(36, "GPIO_36"),
> > ++ PINCTRL_PIN(37, "GPIO_37"),
> > ++ PINCTRL_PIN(38, "GPIO_38"),
> > ++ PINCTRL_PIN(39, "GPIO_39"),
> > ++ PINCTRL_PIN(40, "GPIO_40"),
> > ++ PINCTRL_PIN(41, "GPIO_41"),
> > ++ PINCTRL_PIN(42, "GPIO_42"),
> > ++ PINCTRL_PIN(43, "GPIO_43"),
> > ++ PINCTRL_PIN(44, "GPIO_44"),
> > ++ PINCTRL_PIN(45, "GPIO_45"),
> > ++ PINCTRL_PIN(46, "GPIO_46"),
> > ++ PINCTRL_PIN(47, "GPIO_47"),
> > ++ PINCTRL_PIN(48, "GPIO_48"),
> > ++ PINCTRL_PIN(49, "GPIO_49"),
> > ++ PINCTRL_PIN(50, "GPIO_50"),
> > ++ PINCTRL_PIN(51, "GPIO_51"),
> > ++ PINCTRL_PIN(52, "GPIO_52"),
> > ++ PINCTRL_PIN(53, "GPIO_53"),
> > ++ PINCTRL_PIN(54, "GPIO_54"),
> > ++ PINCTRL_PIN(55, "GPIO_55"),
> > ++ PINCTRL_PIN(56, "GPIO_56"),
> > ++ PINCTRL_PIN(57, "GPIO_57"),
> > ++ PINCTRL_PIN(58, "GPIO_58"),
> > ++ PINCTRL_PIN(59, "GPIO_59"),
> > ++ PINCTRL_PIN(60, "GPIO_60"),
> > ++ PINCTRL_PIN(61, "GPIO_61"),
> > ++ PINCTRL_PIN(62, "GPIO_62"),
> > ++ PINCTRL_PIN(63, "GPIO_63"),
> > ++ PINCTRL_PIN(64, "GPIO_64"),
> > ++};
> > ++
> > ++#define DECLARE_MSM_GPIO_PINS(pin) \
> > ++ static const unsigned int gpio##pin##_pins[] = { pin }
> > ++DECLARE_MSM_GPIO_PINS(0);
> > ++DECLARE_MSM_GPIO_PINS(1);
> > ++DECLARE_MSM_GPIO_PINS(2);
> > ++DECLARE_MSM_GPIO_PINS(3);
> > ++DECLARE_MSM_GPIO_PINS(4);
> > ++DECLARE_MSM_GPIO_PINS(5);
> > ++DECLARE_MSM_GPIO_PINS(6);
> > ++DECLARE_MSM_GPIO_PINS(7);
> > ++DECLARE_MSM_GPIO_PINS(8);
> > ++DECLARE_MSM_GPIO_PINS(9);
> > ++DECLARE_MSM_GPIO_PINS(10);
> > ++DECLARE_MSM_GPIO_PINS(11);
> > ++DECLARE_MSM_GPIO_PINS(12);
> > ++DECLARE_MSM_GPIO_PINS(13);
> > ++DECLARE_MSM_GPIO_PINS(14);
> > ++DECLARE_MSM_GPIO_PINS(15);
> > ++DECLARE_MSM_GPIO_PINS(16);
> > ++DECLARE_MSM_GPIO_PINS(17);
> > ++DECLARE_MSM_GPIO_PINS(18);
> > ++DECLARE_MSM_GPIO_PINS(19);
> > ++DECLARE_MSM_GPIO_PINS(20);
> > ++DECLARE_MSM_GPIO_PINS(21);
> > ++DECLARE_MSM_GPIO_PINS(22);
> > ++DECLARE_MSM_GPIO_PINS(23);
> > ++DECLARE_MSM_GPIO_PINS(24);
> > ++DECLARE_MSM_GPIO_PINS(25);
> > ++DECLARE_MSM_GPIO_PINS(26);
> > ++DECLARE_MSM_GPIO_PINS(27);
> > ++DECLARE_MSM_GPIO_PINS(28);
> > ++DECLARE_MSM_GPIO_PINS(29);
> > ++DECLARE_MSM_GPIO_PINS(30);
> > ++DECLARE_MSM_GPIO_PINS(31);
> > ++DECLARE_MSM_GPIO_PINS(32);
> > ++DECLARE_MSM_GPIO_PINS(33);
> > ++DECLARE_MSM_GPIO_PINS(34);
> > ++DECLARE_MSM_GPIO_PINS(35);
> > ++DECLARE_MSM_GPIO_PINS(36);
> > ++DECLARE_MSM_GPIO_PINS(37);
> > ++DECLARE_MSM_GPIO_PINS(38);
> > ++DECLARE_MSM_GPIO_PINS(39);
> > ++DECLARE_MSM_GPIO_PINS(40);
> > ++DECLARE_MSM_GPIO_PINS(41);
> > ++DECLARE_MSM_GPIO_PINS(42);
> > ++DECLARE_MSM_GPIO_PINS(43);
> > ++DECLARE_MSM_GPIO_PINS(44);
> > ++DECLARE_MSM_GPIO_PINS(45);
> > ++DECLARE_MSM_GPIO_PINS(46);
> > ++DECLARE_MSM_GPIO_PINS(47);
> > ++DECLARE_MSM_GPIO_PINS(48);
> > ++DECLARE_MSM_GPIO_PINS(49);
> > ++DECLARE_MSM_GPIO_PINS(50);
> > ++DECLARE_MSM_GPIO_PINS(51);
> > ++DECLARE_MSM_GPIO_PINS(52);
> > ++DECLARE_MSM_GPIO_PINS(53);
> > ++DECLARE_MSM_GPIO_PINS(54);
> > ++DECLARE_MSM_GPIO_PINS(55);
> > ++DECLARE_MSM_GPIO_PINS(56);
> > ++DECLARE_MSM_GPIO_PINS(57);
> > ++DECLARE_MSM_GPIO_PINS(58);
> > ++DECLARE_MSM_GPIO_PINS(59);
> > ++DECLARE_MSM_GPIO_PINS(60);
> > ++DECLARE_MSM_GPIO_PINS(61);
> > ++DECLARE_MSM_GPIO_PINS(62);
> > ++DECLARE_MSM_GPIO_PINS(63);
> > ++DECLARE_MSM_GPIO_PINS(64);
> > ++
> > ++enum ipq9574_functions {
> > ++ msm_mux_atest_char,
> > ++ msm_mux_atest_char0,
> > ++ msm_mux_atest_char1,
> > ++ msm_mux_atest_char2,
> > ++ msm_mux_atest_char3,
> > ++ msm_mux_audio_pdm0,
> > ++ msm_mux_audio_pdm1,
> > ++ msm_mux_audio_pri,
> > ++ msm_mux_audio_sec,
> > ++ msm_mux_blsp0_spi,
> > ++ msm_mux_blsp0_uart,
> > ++ msm_mux_blsp1_i2c,
> > ++ msm_mux_blsp1_spi,
> > ++ msm_mux_blsp1_uart,
> > ++ msm_mux_blsp2_i2c,
> > ++ msm_mux_blsp2_spi,
> > ++ msm_mux_blsp2_uart,
> > ++ msm_mux_blsp3_i2c,
> > ++ msm_mux_blsp3_spi,
> > ++ msm_mux_blsp3_uart,
> > ++ msm_mux_blsp4_i2c,
> > ++ msm_mux_blsp4_spi,
> > ++ msm_mux_blsp4_uart,
> > ++ msm_mux_blsp5_i2c,
> > ++ msm_mux_blsp5_uart,
> > ++ msm_mux_cri_trng0,
> > ++ msm_mux_cri_trng1,
> > ++ msm_mux_cri_trng2,
> > ++ msm_mux_cri_trng3,
> > ++ msm_mux_cxc0,
> > ++ msm_mux_cxc1,
> > ++ msm_mux_dbg_out,
> > ++ msm_mux_dwc_ddrphy,
> > ++ msm_mux_gcc_plltest,
> > ++ msm_mux_gcc_tlmm,
> > ++ msm_mux_gpio,
> > ++ msm_mux_mac,
> > ++ msm_mux_mdc,
> > ++ msm_mux_mdio,
> > ++ msm_mux_pcie0_clk,
> > ++ msm_mux_pcie0_wake,
> > ++ msm_mux_pcie1_clk,
> > ++ msm_mux_pcie1_wake,
> > ++ msm_mux_pcie2_clk,
> > ++ msm_mux_pcie2_wake,
> > ++ msm_mux_pcie3_clk,
> > ++ msm_mux_pcie3_wake,
> > ++ msm_mux_prng_rosc0,
> > ++ msm_mux_prng_rosc1,
> > ++ msm_mux_prng_rosc2,
> > ++ msm_mux_prng_rosc3,
> > ++ msm_mux_pta,
> > ++ msm_mux_pwm,
> > ++ msm_mux_qdss_cti_trig_in_a0,
> > ++ msm_mux_qdss_cti_trig_in_a1,
> > ++ msm_mux_qdss_cti_trig_in_b0,
> > ++ msm_mux_qdss_cti_trig_in_b1,
> > ++ msm_mux_qdss_cti_trig_out_a0,
> > ++ msm_mux_qdss_cti_trig_out_a1,
> > ++ msm_mux_qdss_cti_trig_out_b0,
> > ++ msm_mux_qdss_cti_trig_out_b1,
> > ++ msm_mux_qdss_traceclk_a,
> > ++ msm_mux_qdss_traceclk_b,
> > ++ msm_mux_qdss_tracectl_a,
> > ++ msm_mux_qdss_tracectl_b,
> > ++ msm_mux_qdss_tracedata_a,
> > ++ msm_mux_qdss_tracedata_b,
> > ++ msm_mux_qspi_data,
> > ++ msm_mux_qspi_clk,
> > ++ msm_mux_qspi_cs,
> > ++ msm_mux_rx0,
> > ++ msm_mux_rx1,
> > ++ msm_mux_sdc_data,
> > ++ msm_mux_sdc_clk,
> > ++ msm_mux_sdc_cmd,
> > ++ msm_mux_sdc_rclk,
> > ++ msm_mux_tsens_max,
> > ++ msm_mux_wci20,
> > ++ msm_mux_wci21,
> > ++ msm_mux_wsa_swrm,
> > ++ msm_mux__,
> > ++};
> > ++
> > ++static const char * const gpio_groups[] = {
> > ++ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
> > ++ "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
> > ++ "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
> > ++ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
> > ++ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
> > ++ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
> > ++ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
> > ++ "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
> > ++ "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
> > ++ "gpio64",
> > ++};
> > ++
> > ++static const char * const sdc_data_groups[] = {
> > ++ "gpio0",
> > ++ "gpio1",
> > ++ "gpio2",
> > ++ "gpio3",
> > ++ "gpio6",
> > ++ "gpio7",
> > ++ "gpio8",
> > ++ "gpio9",
> > ++};
> > ++
> > ++static const char * const qspi_data_groups[] = {
> > ++ "gpio0",
> > ++ "gpio1",
> > ++ "gpio2",
> > ++ "gpio3",
> > ++};
> > ++
> > ++static const char * const qdss_traceclk_b_groups[] = {
> > ++ "gpio0",
> > ++};
> > ++
> > ++static const char * const qdss_tracectl_b_groups[] = {
> > ++ "gpio1",
> > ++};
> > ++
> > ++static const char * const qdss_tracedata_b_groups[] = {
> > ++ "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", "gpio8", "gpio9",
> > ++ "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", "gpio15", "gpio16",
> > ++ "gpio17",
> > ++};
> > ++
> > ++static const char * const sdc_cmd_groups[] = {
> > ++ "gpio4",
> > ++};
> > ++
> > ++static const char * const qspi_cs_groups[] = {
> > ++ "gpio4",
> > ++};
> > ++
> > ++static const char * const sdc_clk_groups[] = {
> > ++ "gpio5",
> > ++};
> > ++
> > ++static const char * const qspi_clk_groups[] = {
> > ++ "gpio5",
> > ++};
> > ++
> > ++static const char * const sdc_rclk_groups[] = {
> > ++ "gpio10",
> > ++};
> > ++
> > ++static const char * const blsp0_spi_groups[] = {
> > ++ "gpio11", "gpio12", "gpio13", "gpio14",
> > ++};
> > ++
> > ++static const char * const blsp0_uart_groups[] = {
> > ++ "gpio11", "gpio12", "gpio13", "gpio14",
> > ++};
> > ++
> > ++static const char * const blsp3_spi_groups[] = {
> > ++ "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
> > ++};
> > ++
> > ++static const char * const blsp3_i2c_groups[] = {
> > ++ "gpio15", "gpio16",
> > ++};
> > ++
> > ++static const char * const blsp3_uart_groups[] = {
> > ++ "gpio15", "gpio16", "gpio17", "gpio18",
> > ++};
> > ++
> > ++static const char * const dbg_out_groups[] = {
> > ++ "gpio17",
> > ++};
> > ++
> > ++static const char * const cri_trng0_groups[] = {
> > ++ "gpio20", "gpio38",
> > ++};
> > ++
> > ++static const char * const cri_trng1_groups[] = {
> > ++ "gpio21", "gpio34",
> > ++};
> > ++
> > ++static const char * const pcie0_clk_groups[] = {
> > ++ "gpio22",
> > ++};
> > ++
> > ++static const char * const pta_groups[] = {
> > ++ "gpio22", "gpio23", "gpio24", "gpio54", "gpio55", "gpio56", "gpio61",
> > ++ "gpio62", "gpio63",
> > ++};
> > ++
> > ++static const char * const wci21_groups[] = {
> > ++ "gpio23", "gpio24",
> > ++};
> > ++
> > ++static const char * const cxc0_groups[] = {
> > ++ "gpio23", "gpio24",
> > ++};
> > ++
> > ++static const char * const pcie0_wake_groups[] = {
> > ++ "gpio24",
> > ++};
> > ++
> > ++static const char * const qdss_cti_trig_out_b0_groups[] = {
> > ++ "gpio24",
> > ++};
> > ++
> > ++static const char * const pcie1_clk_groups[] = {
> > ++ "gpio25",
> > ++};
> > ++
> > ++static const char * const qdss_cti_trig_in_b0_groups[] = {
> > ++ "gpio25",
> > ++};
> > ++
> > ++static const char * const atest_char0_groups[] = {
> > ++ "gpio26",
> > ++};
> > ++
> > ++static const char * const qdss_cti_trig_out_b1_groups[] = {
> > ++ "gpio26",
> > ++};
> > ++
> > ++static const char * const pcie1_wake_groups[] = {
> > ++ "gpio27",
> > ++};
> > ++
> > ++static const char * const atest_char1_groups[] = {
> > ++ "gpio27",
> > ++};
> > ++
> > ++static const char * const qdss_cti_trig_in_b1_groups[] = {
> > ++ "gpio27",
> > ++};
> > ++
> > ++static const char * const pcie2_clk_groups[] = {
> > ++ "gpio28",
> > ++};
> > ++
> > ++static const char * const atest_char2_groups[] = {
> > ++ "gpio28",
> > ++};
> > ++
> > ++static const char * const atest_char3_groups[] = {
> > ++ "gpio29",
> > ++};
> > ++
> > ++static const char * const pcie2_wake_groups[] = {
> > ++ "gpio30",
> > ++};
> > ++
> > ++static const char * const pwm_groups[] = {
> > ++ "gpio30", "gpio31", "gpio32", "gpio33", "gpio44", "gpio45", "gpio46",
> > ++ "gpio47", "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55",
> > ++ "gpio56", "gpio57", "gpio58", "gpio59", "gpio60",
> > ++};
> > ++
> > ++static const char * const atest_char_groups[] = {
> > ++ "gpio30",
> > ++};
> > ++
> > ++static const char * const pcie3_clk_groups[] = {
> > ++ "gpio31",
> > ++};
> > ++
> > ++static const char * const qdss_cti_trig_in_a1_groups[] = {
> > ++ "gpio31",
> > ++};
> > ++
> > ++static const char * const qdss_cti_trig_out_a1_groups[] = {
> > ++ "gpio32",
> > ++};
> > ++
> > ++static const char * const pcie3_wake_groups[] = {
> > ++ "gpio33",
> > ++};
> > ++
> > ++static const char * const qdss_cti_trig_in_a0_groups[] = {
> > ++ "gpio33",
> > ++};
> > ++
> > ++static const char * const blsp2_uart_groups[] = {
> > ++ "gpio34", "gpio35",
> > ++};
> > ++
> > ++static const char * const blsp2_i2c_groups[] = {
> > ++ "gpio34", "gpio35",
> > ++};
> > ++
> > ++static const char * const blsp2_spi_groups[] = {
> > ++ "gpio34", "gpio35", "gpio36", "gpio37",
> > ++};
> > ++
> > ++static const char * const blsp1_uart_groups[] = {
> > ++ "gpio34", "gpio35", "gpio36", "gpio37",
> > ++};
> > ++
> > ++static const char * const qdss_cti_trig_out_a0_groups[] = {
> > ++ "gpio34",
> > ++};
> > ++
> > ++static const char * const cri_trng2_groups[] = {
> > ++ "gpio35",
> > ++};
> > ++
> > ++static const char * const blsp1_i2c_groups[] = {
> > ++ "gpio36", "gpio37",
> > ++};
> > ++
> > ++static const char * const cri_trng3_groups[] = {
> > ++ "gpio36",
> > ++};
> > ++
> > ++static const char * const dwc_ddrphy_groups[] = {
> > ++ "gpio37",
> > ++};
> > ++
> > ++static const char * const mdc_groups[] = {
> > ++ "gpio38",
> > ++};
> > ++
> > ++static const char * const mdio_groups[] = {
> > ++ "gpio39",
> > ++};
> > ++
> > ++static const char * const audio_pri_groups[] = {
> > ++ "gpio40", "gpio41", "gpio42", "gpio43", "gpio61", "gpio61",
> > ++};
> > ++
> > ++static const char * const audio_pdm0_groups[] = {
> > ++ "gpio40", "gpio41", "gpio42", "gpio43",
> > ++};
> > ++
> > ++static const char * const qdss_traceclk_a_groups[] = {
> > ++ "gpio43",
> > ++};
> > ++
> > ++static const char * const audio_sec_groups[] = {
> > ++ "gpio44", "gpio45", "gpio46", "gpio47", "gpio62", "gpio62",
> > ++};
> > ++
> > ++static const char * const wsa_swrm_groups[] = {
> > ++ "gpio44", "gpio45",
> > ++};
> > ++
> > ++static const char * const qdss_tracectl_a_groups[] = {
> > ++ "gpio44",
> > ++};
> > ++
> > ++static const char * const qdss_tracedata_a_groups[] = {
> > ++ "gpio45", "gpio46", "gpio47", "gpio48", "gpio49", "gpio50", "gpio51",
> > ++ "gpio52", "gpio53", "gpio54", "gpio55", "gpio56", "gpio57", "gpio58",
> > ++ "gpio59", "gpio60",
> > ++};
> > ++
> > ++static const char * const rx1_groups[] = {
> > ++ "gpio46",
> > ++};
> > ++
> > ++static const char * const mac_groups[] = {
> > ++ "gpio46", "gpio47", "gpio57", "gpio58",
> > ++};
> > ++
> > ++static const char * const blsp5_i2c_groups[] = {
> > ++ "gpio48", "gpio49",
> > ++};
> > ++
> > ++static const char * const blsp5_uart_groups[] = {
> > ++ "gpio48", "gpio49",
> > ++};
> > ++
> > ++static const char * const blsp4_uart_groups[] = {
> > ++ "gpio50", "gpio51", "gpio52", "gpio53",
> > ++};
> > ++
> > ++static const char * const blsp4_i2c_groups[] = {
> > ++ "gpio50", "gpio51",
> > ++};
> > ++
> > ++static const char * const blsp4_spi_groups[] = {
> > ++ "gpio50", "gpio51", "gpio52", "gpio53",
> > ++};
> > ++
> > ++static const char * const wci20_groups[] = {
> > ++ "gpio57", "gpio58",
> > ++};
> > ++
> > ++static const char * const cxc1_groups[] = {
> > ++ "gpio57", "gpio58",
> > ++};
> > ++
> > ++static const char * const rx0_groups[] = {
> > ++ "gpio59",
> > ++};
> > ++
> > ++static const char * const prng_rosc0_groups[] = {
> > ++ "gpio60",
> > ++};
> > ++
> > ++static const char * const gcc_plltest_groups[] = {
> > ++ "gpio60", "gpio62",
> > ++};
> > ++
> > ++static const char * const blsp1_spi_groups[] = {
> > ++ "gpio61", "gpio62", "gpio63", "gpio64",
> > ++};
> > ++
> > ++static const char * const audio_pdm1_groups[] = {
> > ++ "gpio61", "gpio62", "gpio63", "gpio64",
> > ++};
> > ++
> > ++static const char * const prng_rosc1_groups[] = {
> > ++ "gpio61",
> > ++};
> > ++
> > ++static const char * const gcc_tlmm_groups[] = {
> > ++ "gpio61",
> > ++};
> > ++
> > ++static const char * const prng_rosc2_groups[] = {
> > ++ "gpio62",
> > ++};
> > ++
> > ++static const char * const prng_rosc3_groups[] = {
> > ++ "gpio63",
> > ++};
> > ++
> > ++static const char * const tsens_max_groups[] = {
> > ++ "gpio64",
> > ++};
> > ++
> > ++static const struct msm_function ipq9574_functions[] = {
> > ++ FUNCTION(atest_char),
> > ++ FUNCTION(atest_char0),
> > ++ FUNCTION(atest_char1),
> > ++ FUNCTION(atest_char2),
> > ++ FUNCTION(atest_char3),
> > ++ FUNCTION(audio_pdm0),
> > ++ FUNCTION(audio_pdm1),
> > ++ FUNCTION(audio_pri),
> > ++ FUNCTION(audio_sec),
> > ++ FUNCTION(blsp0_spi),
> > ++ FUNCTION(blsp0_uart),
> > ++ FUNCTION(blsp1_i2c),
> > ++ FUNCTION(blsp1_spi),
> > ++ FUNCTION(blsp1_uart),
> > ++ FUNCTION(blsp2_i2c),
> > ++ FUNCTION(blsp2_spi),
> > ++ FUNCTION(blsp2_uart),
> > ++ FUNCTION(blsp3_i2c),
> > ++ FUNCTION(blsp3_spi),
> > ++ FUNCTION(blsp3_uart),
> > ++ FUNCTION(blsp4_i2c),
> > ++ FUNCTION(blsp4_spi),
> > ++ FUNCTION(blsp4_uart),
> > ++ FUNCTION(blsp5_i2c),
> > ++ FUNCTION(blsp5_uart),
> > ++ FUNCTION(cri_trng0),
> > ++ FUNCTION(cri_trng1),
> > ++ FUNCTION(cri_trng2),
> > ++ FUNCTION(cri_trng3),
> > ++ FUNCTION(cxc0),
> > ++ FUNCTION(cxc1),
> > ++ FUNCTION(dbg_out),
> > ++ FUNCTION(dwc_ddrphy),
> > ++ FUNCTION(gcc_plltest),
> > ++ FUNCTION(gcc_tlmm),
> > ++ FUNCTION(gpio),
> > ++ FUNCTION(mac),
> > ++ FUNCTION(mdc),
> > ++ FUNCTION(mdio),
> > ++ FUNCTION(pcie0_clk),
> > ++ FUNCTION(pcie0_wake),
> > ++ FUNCTION(pcie1_clk),
> > ++ FUNCTION(pcie1_wake),
> > ++ FUNCTION(pcie2_clk),
> > ++ FUNCTION(pcie2_wake),
> > ++ FUNCTION(pcie3_clk),
> > ++ FUNCTION(pcie3_wake),
> > ++ FUNCTION(prng_rosc0),
> > ++ FUNCTION(prng_rosc1),
> > ++ FUNCTION(prng_rosc2),
> > ++ FUNCTION(prng_rosc3),
> > ++ FUNCTION(pta),
> > ++ FUNCTION(pwm),
> > ++ FUNCTION(qdss_cti_trig_in_a0),
> > ++ FUNCTION(qdss_cti_trig_in_a1),
> > ++ FUNCTION(qdss_cti_trig_in_b0),
> > ++ FUNCTION(qdss_cti_trig_in_b1),
> > ++ FUNCTION(qdss_cti_trig_out_a0),
> > ++ FUNCTION(qdss_cti_trig_out_a1),
> > ++ FUNCTION(qdss_cti_trig_out_b0),
> > ++ FUNCTION(qdss_cti_trig_out_b1),
> > ++ FUNCTION(qdss_traceclk_a),
> > ++ FUNCTION(qdss_traceclk_b),
> > ++ FUNCTION(qdss_tracectl_a),
> > ++ FUNCTION(qdss_tracectl_b),
> > ++ FUNCTION(qdss_tracedata_a),
> > ++ FUNCTION(qdss_tracedata_b),
> > ++ FUNCTION(qspi_data),
> > ++ FUNCTION(qspi_clk),
> > ++ FUNCTION(qspi_cs),
> > ++ FUNCTION(rx0),
> > ++ FUNCTION(rx1),
> > ++ FUNCTION(sdc_data),
> > ++ FUNCTION(sdc_clk),
> > ++ FUNCTION(sdc_cmd),
> > ++ FUNCTION(sdc_rclk),
> > ++ FUNCTION(tsens_max),
> > ++ FUNCTION(wci20),
> > ++ FUNCTION(wci21),
> > ++ FUNCTION(wsa_swrm),
> > ++};
> > ++
> > ++static const struct msm_pingroup ipq9574_groups[] = {
> > ++ PINGROUP(0, sdc_data, qspi_data, qdss_traceclk_b, _, _, _, _, _, _),
> > ++ PINGROUP(1, sdc_data, qspi_data, qdss_tracectl_b, _, _, _, _, _, _),
> > ++ PINGROUP(2, sdc_data, qspi_data, qdss_tracedata_b, _, _, _, _, _, _),
> > ++ PINGROUP(3, sdc_data, qspi_data, qdss_tracedata_b, _, _, _, _, _, _),
> > ++ PINGROUP(4, sdc_cmd, qspi_cs, qdss_tracedata_b, _, _, _, _, _, _),
> > ++ PINGROUP(5, sdc_clk, qspi_clk, qdss_tracedata_b, _, _, _, _, _, _),
> > ++ PINGROUP(6, sdc_data, qdss_tracedata_b, _, _, _, _, _, _, _),
> > ++ PINGROUP(7, sdc_data, qdss_tracedata_b, _, _, _, _, _, _, _),
> > ++ PINGROUP(8, sdc_data, qdss_tracedata_b, _, _, _, _, _, _, _),
> > ++ PINGROUP(9, sdc_data, qdss_tracedata_b, _, _, _, _, _, _, _),
> > ++ PINGROUP(10, sdc_rclk, qdss_tracedata_b, _, _, _, _, _, _, _),
> > ++ PINGROUP(11, blsp0_spi, blsp0_uart, qdss_tracedata_b, _, _, _, _, _, _),
> > ++ PINGROUP(12, blsp0_spi, blsp0_uart, qdss_tracedata_b, _, _, _, _, _, _),
> > ++ PINGROUP(13, blsp0_spi, blsp0_uart, qdss_tracedata_b, _, _, _, _, _, _),
> > ++ PINGROUP(14, blsp0_spi, blsp0_uart, qdss_tracedata_b, _, _, _, _, _, _),
> > ++ PINGROUP(15, blsp3_spi, blsp3_i2c, blsp3_uart, qdss_tracedata_b, _, _, _, _, _),
> > ++ PINGROUP(16, blsp3_spi, blsp3_i2c, blsp3_uart, qdss_tracedata_b, _, _, _, _, _),
> > ++ PINGROUP(17, blsp3_spi, blsp3_uart, dbg_out, qdss_tracedata_b, _, _, _, _, _),
> > ++ PINGROUP(18, blsp3_spi, blsp3_uart, _, _, _, _, _, _, _),
> > ++ PINGROUP(19, blsp3_spi, _, _, _, _, _, _, _, _),
> > ++ PINGROUP(20, blsp3_spi, _, cri_trng0, _, _, _, _, _, _),
> > ++ PINGROUP(21, blsp3_spi, _, cri_trng1, _, _, _, _, _, _),
> > ++ PINGROUP(22, pcie0_clk, _, pta, _, _, _, _, _, _),
> > ++ PINGROUP(23, _, pta, wci21, cxc0, _, _, _, _, _),
> > ++ PINGROUP(24, pcie0_wake, _, pta, wci21, cxc0, _, qdss_cti_trig_out_b0, _, _),
> > ++ PINGROUP(25, pcie1_clk, _, _, qdss_cti_trig_in_b0, _, _, _, _, _),
> > ++ PINGROUP(26, _, atest_char0, _, qdss_cti_trig_out_b1, _, _, _, _, _),
> > ++ PINGROUP(27, pcie1_wake, _, atest_char1, qdss_cti_trig_in_b1, _, _, _, _, _),
> > ++ PINGROUP(28, pcie2_clk, atest_char2, _, _, _, _, _, _, _),
> > ++ PINGROUP(29, atest_char3, _, _, _, _, _, _, _, _),
> > ++ PINGROUP(30, pcie2_wake, pwm, atest_char, _, _, _, _, _, _),
> > ++ PINGROUP(31, pcie3_clk, pwm, _, qdss_cti_trig_in_a1, _, _, _, _, _),
> > ++ PINGROUP(32, pwm, _, qdss_cti_trig_out_a1, _, _, _, _, _, _),
> > ++ PINGROUP(33, pcie3_wake, pwm, _, qdss_cti_trig_in_a0, _, _, _, _, _),
> > ++ PINGROUP(34, blsp2_uart, blsp2_i2c, blsp2_spi, blsp1_uart, _, cri_trng1, qdss_cti_trig_out_a0, _, _),
> > ++ PINGROUP(35, blsp2_uart, blsp2_i2c, blsp2_spi, blsp1_uart, _, cri_trng2, _, _, _),
> > ++ PINGROUP(36, blsp1_uart, blsp1_i2c, blsp2_spi, _, cri_trng3, _, _, _, _),
> > ++ PINGROUP(37, blsp1_uart, blsp1_i2c, blsp2_spi, _, dwc_ddrphy, _, _, _, _),
> > ++ PINGROUP(38, mdc, _, cri_trng0, _, _, _, _, _, _),
> > ++ PINGROUP(39, mdio, _, _, _, _, _, _, _, _),
> > ++ PINGROUP(40, audio_pri, audio_pdm0, _, _, _, _, _, _, _),
> > ++ PINGROUP(41, audio_pri, audio_pdm0, _, _, _, _, _, _, _),
> > ++ PINGROUP(42, audio_pri, audio_pdm0, _, _, _, _, _, _, _),
> > ++ PINGROUP(43, audio_pri, audio_pdm0, _, qdss_traceclk_a, _, _, _, _, _),
> > ++ PINGROUP(44, pwm, audio_sec, wsa_swrm, _, qdss_tracectl_a, _, _, _, _),
> > ++ PINGROUP(45, pwm, audio_sec, wsa_swrm, _, qdss_tracedata_a, _, _, _, _),
> > ++ PINGROUP(46, pwm, audio_sec, rx1, mac, _, qdss_tracedata_a, _, _, _),
> > ++ PINGROUP(47, pwm, audio_sec, mac, _, qdss_tracedata_a, _, _, _, _),
> > ++ PINGROUP(48, blsp5_i2c, blsp5_uart, _, qdss_tracedata_a, _, _, _, _, _),
> > ++ PINGROUP(49, blsp5_i2c, blsp5_uart, _, qdss_tracedata_a, _, _, _, _, _),
> > ++ PINGROUP(50, blsp4_uart, blsp4_i2c, blsp4_spi, pwm, qdss_tracedata_a, _, _, _, _),
> > ++ PINGROUP(51, blsp4_uart, blsp4_i2c, blsp4_spi, pwm, qdss_tracedata_a, _, _, _, _),
> > ++ PINGROUP(52, blsp4_uart, blsp4_spi, pwm, qdss_tracedata_a, _, _, _, _, _),
> > ++ PINGROUP(53, blsp4_uart, blsp4_spi, pwm, qdss_tracedata_a, _, _, _, _, _),
> > ++ PINGROUP(54, pta, pwm, qdss_tracedata_a, _, _, _, _, _, _),
> > ++ PINGROUP(55, pta, pwm, qdss_tracedata_a, _, _, _, _, _, _),
> > ++ PINGROUP(56, pta, pwm, qdss_tracedata_a, _, _, _, _, _, _),
> > ++ PINGROUP(57, wci20, cxc1, mac, pwm, qdss_tracedata_a, _, _, _, _),
> > ++ PINGROUP(58, wci20, cxc1, mac, pwm, qdss_tracedata_a, _, _, _, _),
> > ++ PINGROUP(59, rx0, pwm, qdss_tracedata_a, _, _, _, _, _, _),
> > ++ PINGROUP(60, pwm, prng_rosc0, qdss_tracedata_a, _, gcc_plltest, _, _, _, _),
> > ++ PINGROUP(61, blsp1_spi, audio_pri, audio_pdm1, audio_pri, pta, prng_rosc1, gcc_tlmm, _, _),
> > ++ PINGROUP(62, blsp1_spi, audio_sec, audio_pdm1, audio_sec, pta, prng_rosc2, gcc_plltest, _, _),
> > ++ PINGROUP(63, blsp1_spi, audio_pdm1, pta, prng_rosc3, _, _, _, _, _),
> > ++ PINGROUP(64, blsp1_spi, audio_pdm1, tsens_max, _, _, _, _, _, _),
> > ++};
> > ++
> > ++/* Reserving GPIO59 for controlling the QFPROM LDO regulator */
> > ++static const int ipq9574_reserved_gpios[] = {
> > ++ 59, -1
> > ++};
> > ++
> > ++static const struct msm_pinctrl_soc_data ipq9574_pinctrl = {
> > ++ .pins = ipq9574_pins,
> > ++ .npins = ARRAY_SIZE(ipq9574_pins),
> > ++ .functions = ipq9574_functions,
> > ++ .nfunctions = ARRAY_SIZE(ipq9574_functions),
> > ++ .groups = ipq9574_groups,
> > ++ .ngroups = ARRAY_SIZE(ipq9574_groups),
> > ++ .reserved_gpios = ipq9574_reserved_gpios,
> > ++ .ngpios = 65,
> > ++};
> > ++
> > ++static int ipq9574_pinctrl_probe(struct platform_device *pdev)
> > ++{
> > ++ return msm_pinctrl_probe(pdev, &ipq9574_pinctrl);
> > ++}
> > ++
> > ++static const struct of_device_id ipq9574_pinctrl_of_match[] = {
> > ++ { .compatible = "qcom,ipq9574-tlmm", },
> > ++ { }
> > ++};
> > ++MODULE_DEVICE_TABLE(of, ipq9574_pinctrl_of_match);
> > ++
> > ++static struct platform_driver ipq9574_pinctrl_driver = {
> > ++ .driver = {
> > ++ .name = "ipq9574-tlmm",
> > ++ .of_match_table = ipq9574_pinctrl_of_match,
> > ++ },
> > ++ .probe = ipq9574_pinctrl_probe,
> > ++ .remove = msm_pinctrl_remove,
> > ++};
> > ++
> > ++static int __init ipq9574_pinctrl_init(void)
> > ++{
> > ++ return platform_driver_register(&ipq9574_pinctrl_driver);
> > ++}
> > ++arch_initcall(ipq9574_pinctrl_init);
> > ++
> > ++static void __exit ipq9574_pinctrl_exit(void)
> > ++{
> > ++ platform_driver_unregister(&ipq9574_pinctrl_driver);
> > ++}
> > ++module_exit(ipq9574_pinctrl_exit);
> > ++
> > ++MODULE_DESCRIPTION("QTI IPQ9574 TLMM driver");
> > ++MODULE_LICENSE("GPL");
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0010-arm64-dts-qcom-ipq9574-Add-support-for-APSS-clock-co.patch b/target/linux/ipq95xx/patches-6.1/0010-arm64-dts-qcom-ipq9574-Add-support-for-APSS-clock-co.patch
> > new file mode 100644
> > index 0000000000..fb65338b03
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0010-arm64-dts-qcom-ipq9574-Add-support-for-APSS-clock-co.patch
> > @@ -0,0 +1,48 @@
> > +From 7fd33c757ae079f5fcba4ab1de145392247462d0 Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Thu, 6 Apr 2023 11:43:13 +0530
> > +Subject: [PATCH 10/41] arm64: dts: qcom: ipq9574: Add support for APSS clock
> > + controller
> > +
> > +Add the APCS & A73 PLL nodes to support CPU frequency scaling.
> > +
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230406061314.10916-5-quic_devipriy@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 18 ++++++++++++++++++
> > + 1 file changed, 18 insertions(+)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +index 3bb7435f5e7f..00aeb994ee60 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -201,6 +201,24 @@ v2m2: v2m at 2000 {
> > + };
> > + };
> > +
> > ++ apcs_glb: mailbox at b111000 {
> > ++ compatible = "qcom,ipq9574-apcs-apps-global",
> > ++ "qcom,ipq6018-apcs-apps-global";
> > ++ reg = <0x0b111000 0x1000>;
> > ++ #clock-cells = <1>;
> > ++ clocks = <&a73pll>, <&xo_board_clk>;
> > ++ clock-names = "pll", "xo";
> > ++ #mbox-cells = <1>;
> > ++ };
> > ++
> > ++ a73pll: clock at b116000 {
> > ++ compatible = "qcom,ipq9574-a73pll";
> > ++ reg = <0x0b116000 0x40>;
> > ++ #clock-cells = <0>;
> > ++ clocks = <&xo_board_clk>;
> > ++ clock-names = "xo";
> > ++ };
> > ++
> > + timer at b120000 {
> > + compatible = "arm,armv7-timer-mem";
> > + reg = <0x0b120000 0x1000>;
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0011-clk-qcom-apss-ipq-pll-Add-support-for-IPQ9574.patch b/target/linux/ipq95xx/patches-6.1/0011-clk-qcom-apss-ipq-pll-Add-support-for-IPQ9574.patch
> > new file mode 100644
> > index 0000000000..3dcab1e25d
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0011-clk-qcom-apss-ipq-pll-Add-support-for-IPQ9574.patch
> > @@ -0,0 +1,66 @@
> > +From f2e33970f45a9ce5c94da83980d1e95e21a565fe Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Thu, 6 Apr 2023 11:43:11 +0530
> > +Subject: [PATCH 11/41] clk: qcom: apss-ipq-pll: Add support for IPQ9574
> > +
> > +Add the compatible and configuration values for A73 Huayra PLL found
> > +on IPQ9574.
> > +
> > +Co-developed-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> > +Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Acked-by: Stephen Boyd <sboyd at kernel.org>
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230406061314.10916-3-quic_devipriy@quicinc.com
> > +---
> > + drivers/clk/qcom/apss-ipq-pll.c | 19 +++++++++++++++++++
> > + 1 file changed, 19 insertions(+)
> > +
> > +diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
> > +index 4f2a147e9fb2..56f33af11311 100644
> > +--- a/drivers/clk/qcom/apss-ipq-pll.c
> > ++++ b/drivers/clk/qcom/apss-ipq-pll.c
> > +@@ -68,6 +68,18 @@ static const struct alpha_pll_config ipq8074_pll_config = {
> > + .test_ctl_hi_val = 0x4000,
> > + };
> > +
> > ++static const struct alpha_pll_config ipq9574_pll_config = {
> > ++ .l = 0x3b,
> > ++ .config_ctl_val = 0x200d4828,
> > ++ .config_ctl_hi_val = 0x6,
> > ++ .early_output_mask = BIT(3),
> > ++ .aux2_output_mask = BIT(2),
> > ++ .aux_output_mask = BIT(1),
> > ++ .main_output_mask = BIT(0),
> > ++ .test_ctl_val = 0x0,
> > ++ .test_ctl_hi_val = 0x4000,
> > ++};
> > ++
> > + struct apss_pll_data {
> > + struct clk_alpha_pll *pll;
> > + const struct alpha_pll_config *pll_config;
> > +@@ -83,6 +95,12 @@ static struct apss_pll_data ipq6018_pll_data = {
> > + .pll_config = &ipq6018_pll_config,
> > + };
> > +
> > ++static struct apss_pll_data ipq9574_pll_data = {
> > ++ .pll_type = CLK_ALPHA_PLL_TYPE_HUAYRA,
> > ++ .pll = &ipq_pll_huayra,
> > ++ .pll_config = &ipq9574_pll_config,
> > ++};
> > ++
> > + static const struct regmap_config ipq_pll_regmap_config = {
> > + .reg_bits = 32,
> > + .reg_stride = 4,
> > +@@ -124,6 +142,7 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
> > + static const struct of_device_id apss_ipq_pll_match_table[] = {
> > + { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_data },
> > + { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_data },
> > ++ { .compatible = "qcom,ipq9574-a73pll", .data = &ipq9574_pll_data },
> > + { }
> > + };
> > + MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0012-regulator-qcom_smd-Add-MP5496-S1-regulator.patch b/target/linux/ipq95xx/patches-6.1/0012-regulator-qcom_smd-Add-MP5496-S1-regulator.patch
> > new file mode 100644
> > index 0000000000..043a60a05b
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0012-regulator-qcom_smd-Add-MP5496-S1-regulator.patch
> > @@ -0,0 +1,43 @@
> > +From 10b07ee264b5cc807939be4cbc60a3abad3ddf03 Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Fri, 7 Apr 2023 21:27:24 +0530
> > +Subject: [PATCH 12/41] regulator: qcom_smd: Add MP5496 S1 regulator
> > +
> > +Adding support for MP5496 S1 regulator on IPQ9574 SoC.
> > +
> > +Co-developed-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> > +Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Link: https://lore.kernel.org/r/20230407155727.20615-3-quic_devipriy@quicinc.com
> > +Signed-off-by: Mark Brown <broonie at kernel.org>
> > +---
> > + drivers/regulator/qcom_smd-regulator.c | 5 +++--
> > + 1 file changed, 3 insertions(+), 2 deletions(-)
> > +
> > +diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
> > +index f98168d58dce..88ef56a60b2a 100644
> > +--- a/drivers/regulator/qcom_smd-regulator.c
> > ++++ b/drivers/regulator/qcom_smd-regulator.c
> > +@@ -731,7 +731,7 @@ static const struct regulator_desc pms405_pldo600 = {
> > + .ops = &rpm_smps_ldo_ops,
> > + };
> > +
> > +-static const struct regulator_desc mp5496_smpa2 = {
> > ++static const struct regulator_desc mp5496_smps = {
> > + .linear_ranges = (struct linear_range[]) {
> > + REGULATOR_LINEAR_RANGE(600000, 0, 127, 12500),
> > + },
> > +@@ -776,7 +776,8 @@ struct rpm_regulator_data {
> > + };
> > +
> > + static const struct rpm_regulator_data rpm_mp5496_regulators[] = {
> > +- { "s2", QCOM_SMD_RPM_SMPA, 2, &mp5496_smpa2, "s2" },
> > ++ { "s1", QCOM_SMD_RPM_SMPA, 1, &mp5496_smps, "s1" },
> > ++ { "s2", QCOM_SMD_RPM_SMPA, 2, &mp5496_smps, "s2" },
> > + { "l2", QCOM_SMD_RPM_LDOA, 2, &mp5496_ldoa2, "l2" },
> > + {}
> > + };
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0013-arm64-dts-qcom-ipq9574-rename-al02-c7-dts-to-rdp433.patch b/target/linux/ipq95xx/patches-6.1/0013-arm64-dts-qcom-ipq9574-rename-al02-c7-dts-to-rdp433.patch
> > new file mode 100644
> > index 0000000000..64523c9e3d
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0013-arm64-dts-qcom-ipq9574-rename-al02-c7-dts-to-rdp433.patch
> > @@ -0,0 +1,49 @@
> > +From 89978464908147356b67ee57dd07482dc7ffe332 Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Tue, 25 Apr 2023 14:10:10 +0530
> > +Subject: [PATCH 13/41] arm64: dts: qcom: ipq9574: rename al02-c7 dts to rdp433
> > +
> > +Rename the dts after Reference Design Platform(RDP) to adopt
> > +standard naming convention.
> > +
> > +Acked-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230425084010.15581-7-quic_devipriy@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/Makefile | 2 +-
> > + .../boot/dts/qcom/{ipq9574-al02-c7.dts => ipq9574-rdp433.dts} | 2 +-
> > + 2 files changed, 2 insertions(+), 2 deletions(-)
> > + rename arch/arm64/boot/dts/qcom/{ipq9574-al02-c7.dts => ipq9574-rdp433.dts} (97%)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > +index 8e04f0f663da..3754d83ed2cb 100644
> > +--- a/arch/arm64/boot/dts/qcom/Makefile
> > ++++ b/arch/arm64/boot/dts/qcom/Makefile
> > +@@ -7,7 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
> > +-dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb
> > ++dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > +similarity index 97%
> > +rename from arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
> > +rename to arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > +index 2c8430197ec0..2ce8e09e7565 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > +@@ -1,6 +1,6 @@
> > + // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > + /*
> > +- * IPQ9574 AL02-C7 board device tree source
> > ++ * IPQ9574 RDP433 board device tree source
> > + *
> > + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> > + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0014-arm64-dts-qcom-ipq9574-Drop-bias_pll_ubi_nc_clk-inpu.patch b/target/linux/ipq95xx/patches-6.1/0014-arm64-dts-qcom-ipq9574-Drop-bias_pll_ubi_nc_clk-inpu.patch
> > new file mode 100644
> > index 0000000000..2f37a145ae
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0014-arm64-dts-qcom-ipq9574-Drop-bias_pll_ubi_nc_clk-inpu.patch
> > @@ -0,0 +1,44 @@
> > +From 20576d5e55831df510ed60f53d83c6e0618c2343 Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Tue, 25 Apr 2023 14:10:09 +0530
> > +Subject: [PATCH 14/41] arm64: dts: qcom: ipq9574: Drop bias_pll_ubi_nc_clk
> > + input
> > +
> > +Drop unused bias_pll_ubi_nc_clk input to the clock controller.
> > +
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230425084010.15581-6-quic_devipriy@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 8 +-------
> > + 1 file changed, 1 insertion(+), 7 deletions(-)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +index 00aeb994ee60..0b8cd6ca0abe 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -16,12 +16,6 @@ / {
> > + #size-cells = <2>;
> > +
> > + clocks {
> > +- bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
> > +- compatible = "fixed-clock";
> > +- clock-frequency = <353000000>;
> > +- #clock-cells = <0>;
> > +- };
> > +-
> > + sleep_clk: sleep-clk {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > +@@ -131,7 +125,7 @@ gcc: clock-controller at 1800000 {
> > + reg = <0x01800000 0x80000>;
> > + clocks = <&xo_board_clk>,
> > + <&sleep_clk>,
> > +- <&bias_pll_ubi_nc_clk>,
> > ++ <0>,
> > + <0>,
> > + <0>,
> > + <0>,
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0015-arm64-dts-qcom-ipq9574-Update-the-size-of-GICC-GICV-.patch b/target/linux/ipq95xx/patches-6.1/0015-arm64-dts-qcom-ipq9574-Update-the-size-of-GICC-GICV-.patch
> > new file mode 100644
> > index 0000000000..7f7bd63031
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0015-arm64-dts-qcom-ipq9574-Update-the-size-of-GICC-GICV-.patch
> > @@ -0,0 +1,42 @@
> > +From d7a20702b072333cc36cc78eb715295d65159196 Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Tue, 25 Apr 2023 14:10:05 +0530
> > +Subject: [PATCH 15/41] arm64: dts: qcom: ipq9574: Update the size of GICC &
> > + GICV regions
> > +
> > +Update the size of GICC and GICV regions to 8kB as the GICC_DIR & GICV_DIR
> > +registers lie in the second 4kB region. Also, add target CPU encoding.
> > +
> > +Fixes: 97cb36ff52a1 ("arm64: dts: qcom: Add ipq9574 SoC and AL02 board support")
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230425084010.15581-2-quic_devipriy@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 6 +++---
> > + 1 file changed, 3 insertions(+), 3 deletions(-)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +index 0b8cd6ca0abe..77fd9b02df69 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -166,14 +166,14 @@ blsp1_uart2: serial at 78b1000 {
> > + intc: interrupt-controller at b000000 {
> > + compatible = "qcom,msm-qgic2";
> > + reg = <0x0b000000 0x1000>, /* GICD */
> > +- <0x0b002000 0x1000>, /* GICC */
> > ++ <0x0b002000 0x2000>, /* GICC */
> > + <0x0b001000 0x1000>, /* GICH */
> > +- <0x0b004000 0x1000>; /* GICV */
> > ++ <0x0b004000 0x2000>; /* GICV */
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > +- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > ++ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> > + ranges = <0 0x0b00c000 0x3000>;
> > +
> > + v2m0: v2m at 0 {
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0016-arm64-dts-qcom-ipq9574-add-support-for-RDP418-varian.patch b/target/linux/ipq95xx/patches-6.1/0016-arm64-dts-qcom-ipq9574-add-support-for-RDP418-varian.patch
> > new file mode 100644
> > index 0000000000..118aeb807a
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0016-arm64-dts-qcom-ipq9574-add-support-for-RDP418-varian.patch
> > @@ -0,0 +1,166 @@
> > +From e218ade7d728582bce795f6cce6fff39c4107dd5 Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Wed, 10 May 2023 16:13:59 +0530
> > +Subject: [PATCH 16/41] arm64: dts: qcom: ipq9574: add support for RDP418
> > + variant
> > +
> > +Add the initial device tree support for the Reference Design Platform (RDP)
> > +418 based on IPQ9574 family of SoCs. This patch adds support for Console
> > +UART, SPI NOR, eMMC and SMPA1 regulator node.
> > +
> > +Co-developed-by: Anusha Rao <quic_anusha at quicinc.com>
> > +Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230510104359.16678-3-quic_devipriy@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/Makefile | 1 +
> > + arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts | 124 ++++++++++++++++++++
> > + 2 files changed, 125 insertions(+)
> > + create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > +index 3754d83ed2cb..c3aaa9e91dce 100644
> > +--- a/arch/arm64/boot/dts/qcom/Makefile
> > ++++ b/arch/arm64/boot/dts/qcom/Makefile
> > +@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
> > ++dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
> > +new file mode 100644
> > +index 000000000000..2b093e02637b
> > +--- /dev/null
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
> > +@@ -0,0 +1,124 @@
> > ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > ++/*
> > ++ * IPQ9574 RDP418 board device tree source
> > ++ *
> > ++ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> > ++ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> > ++ */
> > ++
> > ++/dts-v1/;
> > ++
> > ++#include "ipq9574.dtsi"
> > ++
> > ++/ {
> > ++ model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2";
> > ++ compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574";
> > ++
> > ++ aliases {
> > ++ serial0 = &blsp1_uart2;
> > ++ };
> > ++
> > ++ chosen {
> > ++ stdout-path = "serial0:115200n8";
> > ++ };
> > ++};
> > ++
> > ++&blsp1_spi0 {
> > ++ pinctrl-0 = <&spi_0_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "okay";
> > ++
> > ++ flash at 0 {
> > ++ compatible = "micron,n25q128a11", "jedec,spi-nor";
> > ++ reg = <0>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <1>;
> > ++ spi-max-frequency = <50000000>;
> > ++ };
> > ++};
> > ++
> > ++&blsp1_uart2 {
> > ++ pinctrl-0 = <&uart2_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "okay";
> > ++};
> > ++
> > ++&rpm_requests {
> > ++ regulators {
> > ++ compatible = "qcom,rpm-mp5496-regulators";
> > ++
> > ++ ipq9574_s1: s1 {
> > ++ /*
> > ++ * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> > ++ * During regulator registration, kernel not knowing the initial voltage,
> > ++ * considers it as zero and brings up the regulators with minimum supported voltage.
> > ++ * Update the regulator-min-microvolt with SVS voltage of 725mV so that
> > ++ * the regulators are brought up with 725mV which is sufficient for all the
> > ++ * corner parts to operate at 800MHz
> > ++ */
> > ++ regulator-min-microvolt = <725000>;
> > ++ regulator-max-microvolt = <1075000>;
> > ++ };
> > ++ };
> > ++};
> > ++
> > ++&sdhc_1 {
> > ++ pinctrl-0 = <&sdc_default_state>;
> > ++ pinctrl-names = "default";
> > ++ mmc-ddr-1_8v;
> > ++ mmc-hs200-1_8v;
> > ++ mmc-hs400-1_8v;
> > ++ mmc-hs400-enhanced-strobe;
> > ++ max-frequency = <384000000>;
> > ++ bus-width = <8>;
> > ++ status = "okay";
> > ++};
> > ++
> > ++&sleep_clk {
> > ++ clock-frequency = <32000>;
> > ++};
> > ++
> > ++&tlmm {
> > ++ sdc_default_state: sdc-default-state {
> > ++ clk-pins {
> > ++ pins = "gpio5";
> > ++ function = "sdc_clk";
> > ++ drive-strength = <8>;
> > ++ bias-disable;
> > ++ };
> > ++
> > ++ cmd-pins {
> > ++ pins = "gpio4";
> > ++ function = "sdc_cmd";
> > ++ drive-strength = <8>;
> > ++ bias-pull-up;
> > ++ };
> > ++
> > ++ data-pins {
> > ++ pins = "gpio0", "gpio1", "gpio2",
> > ++ "gpio3", "gpio6", "gpio7",
> > ++ "gpio8", "gpio9";
> > ++ function = "sdc_data";
> > ++ drive-strength = <8>;
> > ++ bias-pull-up;
> > ++ };
> > ++
> > ++ rclk-pins {
> > ++ pins = "gpio10";
> > ++ function = "sdc_rclk";
> > ++ drive-strength = <8>;
> > ++ bias-pull-down;
> > ++ };
> > ++ };
> > ++
> > ++ spi_0_pins: spi-0-state {
> > ++ pins = "gpio11", "gpio12", "gpio13", "gpio14";
> > ++ function = "blsp0_spi";
> > ++ drive-strength = <8>;
> > ++ bias-disable;
> > ++ };
> > ++};
> > ++
> > ++&xo_board_clk {
> > ++ clock-frequency = <24000000>;
> > ++};
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0017-arm64-dts-qcom-ipq9574-Add-SMEM-support.patch b/target/linux/ipq95xx/patches-6.1/0017-arm64-dts-qcom-ipq9574-Add-SMEM-support.patch
> > new file mode 100644
> > index 0000000000..d6b1156c67
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0017-arm64-dts-qcom-ipq9574-Add-SMEM-support.patch
> > @@ -0,0 +1,48 @@
> > +From dcd3cd850131c36cc52ccee74e509d6cf194af2b Mon Sep 17 00:00:00 2001
> > +From: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
> > +Date: Thu, 11 May 2023 13:28:14 +0530
> > +Subject: [PATCH 17/41] arm64: dts: qcom: ipq9574: Add SMEM support
> > +
> > +Add the required nodes to support SMEM
> > +
> > +Signed-off-by: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230511075814.2370-3-quic_poovendh@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 13 +++++++++++++
> > + 1 file changed, 13 insertions(+)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +index 77fd9b02df69..a8ce148e52e4 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -94,6 +94,13 @@ tz_region: tz at 4a600000 {
> > + reg = <0x0 0x4a600000 0x0 0x400000>;
> > + no-map;
> > + };
> > ++
> > ++ smem at 4aa00000 {
> > ++ compatible = "qcom,smem";
> > ++ reg = <0x0 0x4aa00000 0x0 0x00100000>;
> > ++ hwlocks = <&tcsr_mutex 0>;
> > ++ no-map;
> > ++ };
> > + };
> > +
> > + soc: soc at 0 {
> > +@@ -136,6 +143,12 @@ gcc: clock-controller at 1800000 {
> > + #power-domain-cells = <1>;
> > + };
> > +
> > ++ tcsr_mutex: hwlock at 1905000 {
> > ++ compatible = "qcom,tcsr-mutex";
> > ++ reg = <0x01905000 0x20000>;
> > ++ #hwlock-cells = <1>;
> > ++ };
> > ++
> > + sdhc_1: mmc at 7804000 {
> > + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
> > + reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0018-arm64-dts-qcom-ipq9574-add-support-for-RDP449-varian.patch b/target/linux/ipq95xx/patches-6.1/0018-arm64-dts-qcom-ipq9574-add-support-for-RDP449-varian.patch
> > new file mode 100644
> > index 0000000000..4d2d3fdf50
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0018-arm64-dts-qcom-ipq9574-add-support-for-RDP449-varian.patch
> > @@ -0,0 +1,121 @@
> > +From 013dab443b763648d450931df3f73a6c783c8197 Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Tue, 16 May 2023 19:20:13 +0530
> > +Subject: [PATCH 18/41] arm64: dts: qcom: ipq9574: add support for RDP449
> > + variant
> > +
> > +Add the initial device tree support for the Reference Design Platform (RDP)
> > +449 based on IPQ9574 family of SoCs. This patch adds support for Console
> > +UART, SPI NOR and SMPA1 regulator node.
> > +
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230516135013.3547-3-quic_devipriy@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/Makefile | 1 +
> > + arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts | 80 +++++++++++++++++++++
> > + 2 files changed, 81 insertions(+)
> > + create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > +index c3aaa9e91dce..f237a3683ca4 100644
> > +--- a/arch/arm64/boot/dts/qcom/Makefile
> > ++++ b/arch/arm64/boot/dts/qcom/Makefile
> > +@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb
> > ++dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
> > +new file mode 100644
> > +index 000000000000..c8fa54e1a62c
> > +--- /dev/null
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
> > +@@ -0,0 +1,80 @@
> > ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > ++/*
> > ++ * IPQ9574 RDP449 board device tree source
> > ++ *
> > ++ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> > ++ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> > ++ */
> > ++
> > ++/dts-v1/;
> > ++
> > ++#include "ipq9574.dtsi"
> > ++
> > ++/ {
> > ++ model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6";
> > ++ compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574";
> > ++
> > ++ aliases {
> > ++ serial0 = &blsp1_uart2;
> > ++ };
> > ++
> > ++ chosen {
> > ++ stdout-path = "serial0:115200n8";
> > ++ };
> > ++};
> > ++
> > ++&blsp1_spi0 {
> > ++ pinctrl-0 = <&spi_0_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "okay";
> > ++
> > ++ flash at 0 {
> > ++ compatible = "micron,n25q128a11", "jedec,spi-nor";
> > ++ reg = <0>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <1>;
> > ++ spi-max-frequency = <50000000>;
> > ++ };
> > ++};
> > ++
> > ++&blsp1_uart2 {
> > ++ pinctrl-0 = <&uart2_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "okay";
> > ++};
> > ++
> > ++&rpm_requests {
> > ++ regulators {
> > ++ compatible = "qcom,rpm-mp5496-regulators";
> > ++
> > ++ ipq9574_s1: s1 {
> > ++ /*
> > ++ * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> > ++ * During regulator registration, kernel not knowing the initial voltage,
> > ++ * considers it as zero and brings up the regulators with minimum supported voltage.
> > ++ * Update the regulator-min-microvolt with SVS voltage of 725mV so that
> > ++ * the regulators are brought up with 725mV which is sufficient for all the
> > ++ * corner parts to operate at 800MHz
> > ++ */
> > ++ regulator-min-microvolt = <725000>;
> > ++ regulator-max-microvolt = <1075000>;
> > ++ };
> > ++ };
> > ++};
> > ++
> > ++&sleep_clk {
> > ++ clock-frequency = <32000>;
> > ++};
> > ++
> > ++&tlmm {
> > ++ spi_0_pins: spi-0-state {
> > ++ pins = "gpio11", "gpio12", "gpio13", "gpio14";
> > ++ function = "blsp0_spi";
> > ++ drive-strength = <8>;
> > ++ bias-disable;
> > ++ };
> > ++};
> > ++
> > ++&xo_board_clk {
> > ++ clock-frequency = <24000000>;
> > ++};
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0019-arm64-dts-qcom-ipq9574-Add-cpufreq-support.patch b/target/linux/ipq95xx/patches-6.1/0019-arm64-dts-qcom-ipq9574-Add-cpufreq-support.patch
> > new file mode 100644
> > index 0000000000..938dee32dc
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0019-arm64-dts-qcom-ipq9574-Add-cpufreq-support.patch
> > @@ -0,0 +1,127 @@
> > +From 13ad51cfa78defdafd717ed89785c7bab8330a7b Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Wed, 17 May 2023 22:55:27 +0530
> > +Subject: [PATCH 19/41] arm64: dts: qcom: ipq9574: Add cpufreq support
> > +
> > +Add cpu freq nodes in the device tree to bump cpu frequency above 800MHz.
> > +
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Co-developed-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> > +Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230517172527.1968-4-quic_devipriy@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 60 ++++++++++++++++++++++++++-
> > + 1 file changed, 59 insertions(+), 1 deletion(-)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +index a8ce148e52e4..2d0a10f6c302 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -6,8 +6,9 @@
> > + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> > + */
> > +
> > +-#include <dt-bindings/interrupt-controller/arm-gic.h>
> > ++#include <dt-bindings/clock/qcom,apss-ipq.h>
> > + #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
> > ++#include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/reset/qcom,ipq9574-gcc.h>
> > +
> > + / {
> > +@@ -37,6 +38,10 @@ CPU0: cpu at 0 {
> > + reg = <0x0>;
> > + enable-method = "psci";
> > + next-level-cache = <&L2_0>;
> > ++ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
> > ++ clock-names = "cpu";
> > ++ operating-points-v2 = <&cpu_opp_table>;
> > ++ cpu-supply = <&ipq9574_s1>;
> > + };
> > +
> > + CPU1: cpu at 1 {
> > +@@ -45,6 +50,10 @@ CPU1: cpu at 1 {
> > + reg = <0x1>;
> > + enable-method = "psci";
> > + next-level-cache = <&L2_0>;
> > ++ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
> > ++ clock-names = "cpu";
> > ++ operating-points-v2 = <&cpu_opp_table>;
> > ++ cpu-supply = <&ipq9574_s1>;
> > + };
> > +
> > + CPU2: cpu at 2 {
> > +@@ -53,6 +62,10 @@ CPU2: cpu at 2 {
> > + reg = <0x2>;
> > + enable-method = "psci";
> > + next-level-cache = <&L2_0>;
> > ++ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
> > ++ clock-names = "cpu";
> > ++ operating-points-v2 = <&cpu_opp_table>;
> > ++ cpu-supply = <&ipq9574_s1>;
> > + };
> > +
> > + CPU3: cpu at 3 {
> > +@@ -61,6 +74,10 @@ CPU3: cpu at 3 {
> > + reg = <0x3>;
> > + enable-method = "psci";
> > + next-level-cache = <&L2_0>;
> > ++ clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
> > ++ clock-names = "cpu";
> > ++ operating-points-v2 = <&cpu_opp_table>;
> > ++ cpu-supply = <&ipq9574_s1>;
> > + };
> > +
> > + L2_0: l2-cache {
> > +@@ -75,6 +92,47 @@ memory at 40000000 {
> > + reg = <0x0 0x40000000 0x0 0x0>;
> > + };
> > +
> > ++ cpu_opp_table: opp-table-cpu {
> > ++ compatible = "operating-points-v2";
> > ++ opp-shared;
> > ++
> > ++ opp-936000000 {
> > ++ opp-hz = /bits/ 64 <936000000>;
> > ++ opp-microvolt = <725000>;
> > ++ clock-latency-ns = <200000>;
> > ++ };
> > ++
> > ++ opp-1104000000 {
> > ++ opp-hz = /bits/ 64 <1104000000>;
> > ++ opp-microvolt = <787500>;
> > ++ clock-latency-ns = <200000>;
> > ++ };
> > ++
> > ++ opp-1416000000 {
> > ++ opp-hz = /bits/ 64 <1416000000>;
> > ++ opp-microvolt = <862500>;
> > ++ clock-latency-ns = <200000>;
> > ++ };
> > ++
> > ++ opp-1488000000 {
> > ++ opp-hz = /bits/ 64 <1488000000>;
> > ++ opp-microvolt = <925000>;
> > ++ clock-latency-ns = <200000>;
> > ++ };
> > ++
> > ++ opp-1800000000 {
> > ++ opp-hz = /bits/ 64 <1800000000>;
> > ++ opp-microvolt = <987500>;
> > ++ clock-latency-ns = <200000>;
> > ++ };
> > ++
> > ++ opp-2208000000 {
> > ++ opp-hz = /bits/ 64 <2208000000>;
> > ++ opp-microvolt = <1062500>;
> > ++ clock-latency-ns = <200000>;
> > ++ };
> > ++ };
> > ++
> > + pmu {
> > + compatible = "arm,cortex-a73-pmu";
> > + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0020-arm64-dts-qcom-ipq9574-Add-SMPA1-regulator-node.patch b/target/linux/ipq95xx/patches-6.1/0020-arm64-dts-qcom-ipq9574-Add-SMPA1-regulator-node.patch
> > new file mode 100644
> > index 0000000000..f4a471b75a
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0020-arm64-dts-qcom-ipq9574-Add-SMPA1-regulator-node.patch
> > @@ -0,0 +1,50 @@
> > +From d02b30b6e397d2ab09a703bb873fe722406ab06a Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Wed, 17 May 2023 22:55:26 +0530
> > +Subject: [PATCH 20/41] arm64: dts: qcom: ipq9574: Add SMPA1 regulator node
> > +
> > +Add support for SMPA1 regulator node in IPQ9574.
> > +
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Co-developed-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> > +Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230517172527.1968-3-quic_devipriy@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 19 +++++++++++++++++++
> > + 1 file changed, 19 insertions(+)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > +index 2ce8e09e7565..2b3ed8d351f7 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > +@@ -29,6 +29,25 @@ &blsp1_uart2 {
> > + status = "okay";
> > + };
> > +
> > ++&rpm_requests {
> > ++ regulators {
> > ++ compatible = "qcom,rpm-mp5496-regulators";
> > ++
> > ++ ipq9574_s1: s1 {
> > ++ /*
> > ++ * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> > ++ * During regulator registration, kernel not knowing the initial voltage,
> > ++ * considers it as zero and brings up the regulators with minimum supported voltage.
> > ++ * Update the regulator-min-microvolt with SVS voltage of 725mV so that
> > ++ * the regulators are brought up with 725mV which is sufficient for all the
> > ++ * corner parts to operate at 800MHz
> > ++ */
> > ++ regulator-min-microvolt = <725000>;
> > ++ regulator-max-microvolt = <1075000>;
> > ++ };
> > ++ };
> > ++};
> > ++
> > + &sdhc_1 {
> > + pinctrl-0 = <&sdc_default_state>;
> > + pinctrl-names = "default";
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0021-arm64-dts-qcom-ipq9574-Add-RPM-related-nodes.patch b/target/linux/ipq95xx/patches-6.1/0021-arm64-dts-qcom-ipq9574-Add-RPM-related-nodes.patch
> > new file mode 100644
> > index 0000000000..c1fc3b23c5
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0021-arm64-dts-qcom-ipq9574-Add-RPM-related-nodes.patch
> > @@ -0,0 +1,55 @@
> > +From 3ef03d409e8cb97d6659fa7b130b14f1726ea8bb Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Wed, 17 May 2023 22:55:25 +0530
> > +Subject: [PATCH 21/41] arm64: dts: qcom: ipq9574: Add RPM related nodes
> > +
> > +Add RPM Glink & RPM message RAM nodes to support frequency scaling
> > +on IPQ9574.
> > +
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Co-developed-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> > +Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230517172527.1968-2-quic_devipriy@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 17 +++++++++++++++++
> > + 1 file changed, 17 insertions(+)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +index 2d0a10f6c302..5d99b9660e33 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -161,12 +161,29 @@ smem at 4aa00000 {
> > + };
> > + };
> > +
> > ++ rpm-glink {
> > ++ compatible = "qcom,glink-rpm";
> > ++ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> > ++ qcom,rpm-msg-ram = <&rpm_msg_ram>;
> > ++ mboxes = <&apcs_glb 0>;
> > ++
> > ++ rpm_requests: rpm-requests {
> > ++ compatible = "qcom,rpm-ipq9574";
> > ++ qcom,glink-channels = "rpm_requests";
> > ++ };
> > ++ };
> > ++
> > + soc: soc at 0 {
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0 0 0 0xffffffff>;
> > +
> > ++ rpm_msg_ram: sram at 60000 {
> > ++ compatible = "qcom,rpm-msg-ram";
> > ++ reg = <0x00060000 0x6000>;
> > ++ };
> > ++
> > + tlmm: pinctrl at 1000000 {
> > + compatible = "qcom,ipq9574-tlmm";
> > + reg = <0x01000000 0x300000>;
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0022-arm64-dts-qcom-ipq9574-add-few-device-nodes.patch b/target/linux/ipq95xx/patches-6.1/0022-arm64-dts-qcom-ipq9574-add-few-device-nodes.patch
> > new file mode 100644
> > index 0000000000..7c91c4a563
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0022-arm64-dts-qcom-ipq9574-add-few-device-nodes.patch
> > @@ -0,0 +1,252 @@
> > +From 0a8b1ac041c37115b7d09afeb203ed8900225cd1 Mon Sep 17 00:00:00 2001
> > +From: Kathiravan T <quic_kathirav at quicinc.com>
> > +Date: Wed, 17 May 2023 12:58:06 +0530
> > +Subject: [PATCH 22/41] arm64: dts: qcom: ipq9574: add few device nodes
> > +
> > +Add QUP(SPI / I2C) peripheral, PRNG, WDOG and the remaining UART nodes.
> > +While at it, enable the SPI NOR in RDP433 board.
> > +
> > +Signed-off-by: Kathiravan T <quic_kathirav at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230517072806.13170-1-quic_kathirav@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 202 ++++++++++++++++++++++++++
> > + 1 file changed, 202 insertions(+)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +index 5d99b9660e33..3bef06ea1c19 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -184,6 +184,13 @@ rpm_msg_ram: sram at 60000 {
> > + reg = <0x00060000 0x6000>;
> > + };
> > +
> > ++ rng: rng at e3000 {
> > ++ compatible = "qcom,prng-ee";
> > ++ reg = <0x000e3000 0x1000>;
> > ++ clocks = <&gcc GCC_PRNG_AHB_CLK>;
> > ++ clock-names = "core";
> > ++ };
> > ++
> > + tlmm: pinctrl at 1000000 {
> > + compatible = "qcom,ipq9574-tlmm";
> > + reg = <0x01000000 0x300000>;
> > +@@ -241,6 +248,36 @@ sdhc_1: mmc at 7804000 {
> > + status = "disabled";
> > + };
> > +
> > ++ blsp_dma: dma-controller at 7884000 {
> > ++ compatible = "qcom,bam-v1.7.0";
> > ++ reg = <0x07884000 0x2b000>;
> > ++ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "bam_clk";
> > ++ #dma-cells = <1>;
> > ++ qcom,ee = <0>;
> > ++ };
> > ++
> > ++ blsp1_uart0: serial at 78af000 {
> > ++ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> > ++ reg = <0x078af000 0x200>;
> > ++ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ blsp1_uart1: serial at 78b0000 {
> > ++ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> > ++ reg = <0x078b0000 0x200>;
> > ++ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ status = "disabled";
> > ++ };
> > ++
> > + blsp1_uart2: serial at 78b1000 {
> > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> > + reg = <0x078b1000 0x200>;
> > +@@ -251,6 +288,163 @@ blsp1_uart2: serial at 78b1000 {
> > + status = "disabled";
> > + };
> > +
> > ++ blsp1_uart3: serial at 78b2000 {
> > ++ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> > ++ reg = <0x078b2000 0x200>;
> > ++ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ blsp1_uart4: serial at 78b3000 {
> > ++ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> > ++ reg = <0x078b3000 0x200>;
> > ++ interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ blsp1_uart5: serial at 78b4000 {
> > ++ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> > ++ reg = <0x078b4000 0x200>;
> > ++ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ blsp1_spi0: spi at 78b5000 {
> > ++ compatible = "qcom,spi-qup-v2.2.1";
> > ++ reg = <0x078b5000 0x600>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <0>;
> > ++ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ dmas = <&blsp_dma 12>, <&blsp_dma 13>;
> > ++ dma-names = "tx", "rx";
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ blsp1_i2c1: i2c at 78b6000 {
> > ++ compatible = "qcom,i2c-qup-v2.2.1";
> > ++ reg = <0x078b6000 0x600>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <0>;
> > ++ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ dmas = <&blsp_dma 14>, <&blsp_dma 15>;
> > ++ dma-names = "tx", "rx";
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ blsp1_spi1: spi at 78b6000 {
> > ++ compatible = "qcom,spi-qup-v2.2.1";
> > ++ reg = <0x078b6000 0x600>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <0>;
> > ++ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ dmas = <&blsp_dma 14>, <&blsp_dma 15>;
> > ++ dma-names = "tx", "rx";
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ blsp1_i2c2: i2c at 78b7000 {
> > ++ compatible = "qcom,i2c-qup-v2.2.1";
> > ++ reg = <0x078b7000 0x600>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <0>;
> > ++ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ dmas = <&blsp_dma 16>, <&blsp_dma 17>;
> > ++ dma-names = "tx", "rx";
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ blsp1_spi2: spi at 78b7000 {
> > ++ compatible = "qcom,spi-qup-v2.2.1";
> > ++ reg = <0x078b7000 0x600>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <0>;
> > ++ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ dmas = <&blsp_dma 16>, <&blsp_dma 17>;
> > ++ dma-names = "tx", "rx";
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ blsp1_i2c3: i2c at 78b8000 {
> > ++ compatible = "qcom,i2c-qup-v2.2.1";
> > ++ reg = <0x078b8000 0x600>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <0>;
> > ++ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ dmas = <&blsp_dma 18>, <&blsp_dma 19>;
> > ++ dma-names = "tx", "rx";
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ blsp1_spi3: spi at 78b8000 {
> > ++ compatible = "qcom,spi-qup-v2.2.1";
> > ++ reg = <0x078b8000 0x600>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <0>;
> > ++ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> > ++ spi-max-frequency = <50000000>;
> > ++ clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ dmas = <&blsp_dma 18>, <&blsp_dma 19>;
> > ++ dma-names = "tx", "rx";
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ blsp1_i2c4: i2c at 78b9000 {
> > ++ compatible = "qcom,i2c-qup-v2.2.1";
> > ++ reg = <0x078b9000 0x600>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <0>;
> > ++ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ dmas = <&blsp_dma 20>, <&blsp_dma 21>;
> > ++ dma-names = "tx", "rx";
> > ++ status = "disabled";
> > ++ };
> > ++
> > ++ blsp1_spi4: spi at 78b9000 {
> > ++ compatible = "qcom,spi-qup-v2.2.1";
> > ++ reg = <0x078b9000 0x600>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <0>;
> > ++ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
> > ++ clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
> > ++ <&gcc GCC_BLSP1_AHB_CLK>;
> > ++ clock-names = "core", "iface";
> > ++ dmas = <&blsp_dma 20>, <&blsp_dma 21>;
> > ++ dma-names = "tx", "rx";
> > ++ status = "disabled";
> > ++ };
> > ++
> > + intc: interrupt-controller at b000000 {
> > + compatible = "qcom,msm-qgic2";
> > + reg = <0x0b000000 0x1000>, /* GICD */
> > +@@ -301,6 +495,14 @@ a73pll: clock at b116000 {
> > + clock-names = "xo";
> > + };
> > +
> > ++ watchdog: watchdog at b017000 {
> > ++ compatible = "qcom,apss-wdt-ipq9574", "qcom,kpss-wdt";
> > ++ reg = <0x0b017000 0x1000>;
> > ++ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
> > ++ clocks = <&sleep_clk>;
> > ++ timeout-sec = <30>;
> > ++ };
> > ++
> > + timer at b120000 {
> > + compatible = "arm,armv7-timer-mem";
> > + reg = <0x0b120000 0x1000>;
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0023-arm64-dts-qcom-add-few-more-reserved-memory-region.patch b/target/linux/ipq95xx/patches-6.1/0023-arm64-dts-qcom-add-few-more-reserved-memory-region.patch
> > new file mode 100644
> > index 0000000000..7d5cb0fa55
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0023-arm64-dts-qcom-add-few-more-reserved-memory-region.patch
> > @@ -0,0 +1,99 @@
> > +From d8dc9c70bb55769ebcf17ed9b1ff085c7fb09bff Mon Sep 17 00:00:00 2001
> > +From: Vignesh Viswanathan <quic_viswanat at quicinc.com>
> > +Date: Fri, 26 May 2023 16:36:53 +0530
> > +Subject: [PATCH 23/41] arm64: dts: qcom: add few more reserved memory region
> > +
> > +In IPQ SoCs, bootloader will collect the system RAM contents upon crash
> > +for the post morterm analysis. If we don't reserve the memory region used
> > +by bootloader, obviously linux will consume it and upon next boot on
> > +crash, bootloader will be loaded in the same region, which will lead to
> > +loose some of the data, sometimes we may miss out critical information.
> > +So lets reserve the region used by the bootloader.
> > +
> > +Similarly SBL copies some data into the reserved region and it will be
> > +used in the crash scenario. So reserve 1MB for SBL as well.
> > +
> > +While at it, drop the size padding in the reserved memory region,
> > +wherever applicable.
> > +
> > +Signed-off-by: Vignesh Viswanathan <quic_viswanat at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230526110653.27777-4-quic_viswanat@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/ipq6018.dtsi | 16 +++++++++++++---
> > + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 14 ++++++++++++--
> > + 2 files changed, 25 insertions(+), 5 deletions(-)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> > +index c3492a383155..25cc02d30356 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> > +@@ -150,18 +150,28 @@ rpm_msg_ram: memory at 60000 {
> > + no-map;
> > + };
> > +
> > ++ bootloader at 4a100000 {
> > ++ reg = <0x0 0x4a100000 0x0 0x400000>;
> > ++ no-map;
> > ++ };
> > ++
> > ++ sbl at 4a500000 {
> > ++ reg = <0x0 0x4a500000 0x0 0x100000>;
> > ++ no-map;
> > ++ };
> > ++
> > + tz: memory at 4a600000 {
> > +- reg = <0x0 0x4a600000 0x0 0x00400000>;
> > ++ reg = <0x0 0x4a600000 0x0 0x400000>;
> > + no-map;
> > + };
> > +
> > + smem_region: memory at 4aa00000 {
> > +- reg = <0x0 0x4aa00000 0x0 0x00100000>;
> > ++ reg = <0x0 0x4aa00000 0x0 0x100000>;
> > + no-map;
> > + };
> > +
> > + q6_region: memory at 4ab00000 {
> > +- reg = <0x0 0x4ab00000 0x0 0x05500000>;
> > ++ reg = <0x0 0x4ab00000 0x0 0x5500000>;
> > + no-map;
> > + };
> > + };
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > +index 3f7cf3fdd319..18e2cbe5687b 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> > +@@ -85,17 +85,27 @@ reserved-memory {
> > + #size-cells = <2>;
> > + ranges;
> > +
> > ++ bootloader at 4a600000 {
> > ++ reg = <0x0 0x4a600000 0x0 0x400000>;
> > ++ no-map;
> > ++ };
> > ++
> > ++ sbl at 4aa00000 {
> > ++ reg = <0x0 0x4aa00000 0x0 0x100000>;
> > ++ no-map;
> > ++ };
> > ++
> > + smem at 4ab00000 {
> > + compatible = "qcom,smem";
> > +- reg = <0x0 0x4ab00000 0x0 0x00100000>;
> > ++ reg = <0x0 0x4ab00000 0x0 0x100000>;
> > + no-map;
> > +
> > + hwlocks = <&tcsr_mutex 0>;
> > + };
> > +
> > + memory at 4ac00000 {
> > ++ reg = <0x0 0x4ac00000 0x0 0x400000>;
> > + no-map;
> > +- reg = <0x0 0x4ac00000 0x0 0x00400000>;
> > + };
> > + };
> > +
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0024-arm64-dts-qcom-ipq9574-add-QFPROM-node.patch b/target/linux/ipq95xx/patches-6.1/0024-arm64-dts-qcom-ipq9574-add-QFPROM-node.patch
> > new file mode 100644
> > index 0000000000..4c49a6cb95
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0024-arm64-dts-qcom-ipq9574-add-QFPROM-node.patch
> > @@ -0,0 +1,38 @@
> > +From 040e839870bb864a62a1e769fdfbbc5de64a724d Mon Sep 17 00:00:00 2001
> > +From: Kathiravan T <quic_kathirav at quicinc.com>
> > +Date: Fri, 26 May 2023 18:23:05 +0530
> > +Subject: [PATCH 24/41] arm64: dts: qcom: ipq9574: add QFPROM node
> > +
> > +IPQ9574 has efuse region to determine the various HW quirks. Lets
> > +add the initial support and the individual fuses will be added as they
> > +are required.
> > +
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Signed-off-by: Kathiravan T <quic_kathirav at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230526125305.19626-5-quic_kathirav@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 7 +++++++
> > + 1 file changed, 7 insertions(+)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +index 3bef06ea1c19..b6e4a8a73354 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -191,6 +191,13 @@ rng: rng at e3000 {
> > + clock-names = "core";
> > + };
> > +
> > ++ qfprom: efuse at a4000 {
> > ++ compatible = "qcom,ipq9574-qfprom", "qcom,qfprom";
> > ++ reg = <0x000a4000 0x5a1>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <1>;
> > ++ };
> > ++
> > + tlmm: pinctrl at 1000000 {
> > + compatible = "qcom,ipq9574-tlmm";
> > + reg = <0x01000000 0x300000>;
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0025-arm64-dts-qcom-ipq9574-add-support-for-RDP453-varian.patch b/target/linux/ipq95xx/patches-6.1/0025-arm64-dts-qcom-ipq9574-add-support-for-RDP453-varian.patch
> > new file mode 100644
> > index 0000000000..f50db9dc94
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0025-arm64-dts-qcom-ipq9574-add-support-for-RDP453-varian.patch
> > @@ -0,0 +1,120 @@
> > +From cc88e897a8fe19d2a611a51321577c11a7997e68 Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Fri, 26 May 2023 21:01:52 +0530
> > +Subject: [PATCH 25/41] arm64: dts: qcom: ipq9574: add support for RDP453
> > + variant
> > +
> > +Add the initial device tree support for the Reference Design Platform (RDP)
> > +453 based on IPQ9574 family of SoCs. This patch adds support for Console
> > +UART, SPI NOR and SMPA1 regulator node.
> > +
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230526153152.777-3-quic_devipriy@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/Makefile | 1 +
> > + arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts | 80 +++++++++++++++++++++
> > + 2 files changed, 81 insertions(+)
> > + create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > +index f237a3683ca4..082a5c975288 100644
> > +--- a/arch/arm64/boot/dts/qcom/Makefile
> > ++++ b/arch/arm64/boot/dts/qcom/Makefile
> > +@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb
> > ++dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
> > +new file mode 100644
> > +index 000000000000..f01de6628c3b
> > +--- /dev/null
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
> > +@@ -0,0 +1,80 @@
> > ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > ++/*
> > ++ * IPQ9574 RDP453 board device tree source
> > ++ *
> > ++ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> > ++ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> > ++ */
> > ++
> > ++/dts-v1/;
> > ++
> > ++#include "ipq9574.dtsi"
> > ++
> > ++/ {
> > ++ model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8";
> > ++ compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574";
> > ++
> > ++ aliases {
> > ++ serial0 = &blsp1_uart2;
> > ++ };
> > ++
> > ++ chosen {
> > ++ stdout-path = "serial0:115200n8";
> > ++ };
> > ++};
> > ++
> > ++&blsp1_spi0 {
> > ++ pinctrl-0 = <&spi_0_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "okay";
> > ++
> > ++ flash at 0 {
> > ++ compatible = "micron,n25q128a11", "jedec,spi-nor";
> > ++ reg = <0>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <1>;
> > ++ spi-max-frequency = <50000000>;
> > ++ };
> > ++};
> > ++
> > ++&blsp1_uart2 {
> > ++ pinctrl-0 = <&uart2_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "okay";
> > ++};
> > ++
> > ++&rpm_requests {
> > ++ regulators {
> > ++ compatible = "qcom,rpm-mp5496-regulators";
> > ++
> > ++ ipq9574_s1: s1 {
> > ++ /*
> > ++ * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> > ++ * During regulator registration, kernel not knowing the initial voltage,
> > ++ * considers it as zero and brings up the regulators with minimum supported voltage.
> > ++ * Update the regulator-min-microvolt with SVS voltage of 725mV so that
> > ++ * the regulators are brought up with 725mV which is sufficient for all the
> > ++ * corner parts to operate at 800MHz
> > ++ */
> > ++ regulator-min-microvolt = <725000>;
> > ++ regulator-max-microvolt = <1075000>;
> > ++ };
> > ++ };
> > ++};
> > ++
> > ++&sleep_clk {
> > ++ clock-frequency = <32000>;
> > ++};
> > ++
> > ++&tlmm {
> > ++ spi_0_pins: spi-0-state {
> > ++ pins = "gpio11", "gpio12", "gpio13", "gpio14";
> > ++ function = "blsp0_spi";
> > ++ drive-strength = <8>;
> > ++ bias-disable;
> > ++ };
> > ++};
> > ++
> > ++&xo_board_clk {
> > ++ clock-frequency = <24000000>;
> > ++};
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0026-arm64-dts-qcom-ipq9574-add-support-for-RDP454-varian.patch b/target/linux/ipq95xx/patches-6.1/0026-arm64-dts-qcom-ipq9574-add-support-for-RDP454-varian.patch
> > new file mode 100644
> > index 0000000000..0403ae55ff
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0026-arm64-dts-qcom-ipq9574-add-support-for-RDP454-varian.patch
> > @@ -0,0 +1,120 @@
> > +From acd0e1607b9d113fe2240a571358d8bbdb6f2504 Mon Sep 17 00:00:00 2001
> > +From: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
> > +Date: Wed, 31 May 2023 08:56:48 +0530
> > +Subject: [PATCH 26/41] arm64: dts: qcom: ipq9574: add support for RDP454
> > + variant
> > +
> > +Add the initial device tree support for the Reference Design Platform (RDP)
> > +454 based on IPQ9574 family of SoCs. This patch adds support for Console
> > +UART, SPI NOR and SMPA1 regulator node.
> > +
> > +Signed-off-by: Poovendhan Selvaraj <quic_poovendh at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230531032648.23816-3-quic_poovendh@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/Makefile | 1 +
> > + arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts | 80 +++++++++++++++++++++
> > + 2 files changed, 81 insertions(+)
> > + create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > +index 082a5c975288..a3816c25181e 100644
> > +--- a/arch/arm64/boot/dts/qcom/Makefile
> > ++++ b/arch/arm64/boot/dts/qcom/Makefile
> > +@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb
> > ++dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
> > + dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
> > +new file mode 100644
> > +index 000000000000..6efae3426cb8
> > +--- /dev/null
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
> > +@@ -0,0 +1,80 @@
> > ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > ++/*
> > ++ * IPQ9574 RDP454 board device tree source
> > ++ *
> > ++ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> > ++ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> > ++ */
> > ++
> > ++/dts-v1/;
> > ++
> > ++#include "ipq9574.dtsi"
> > ++
> > ++/ {
> > ++ model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9";
> > ++ compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574";
> > ++
> > ++ aliases {
> > ++ serial0 = &blsp1_uart2;
> > ++ };
> > ++
> > ++ chosen {
> > ++ stdout-path = "serial0:115200n8";
> > ++ };
> > ++};
> > ++
> > ++&blsp1_spi0 {
> > ++ pinctrl-0 = <&spi_0_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "okay";
> > ++
> > ++ flash at 0 {
> > ++ compatible = "micron,n25q128a11", "jedec,spi-nor";
> > ++ reg = <0>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <1>;
> > ++ spi-max-frequency = <50000000>;
> > ++ };
> > ++};
> > ++
> > ++&blsp1_uart2 {
> > ++ pinctrl-0 = <&uart2_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "okay";
> > ++};
> > ++
> > ++&rpm_requests {
> > ++ regulators {
> > ++ compatible = "qcom,rpm-mp5496-regulators";
> > ++
> > ++ ipq9574_s1: s1 {
> > ++ /*
> > ++ * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> > ++ * During regulator registration, kernel not knowing the initial voltage,
> > ++ * considers it as zero and brings up the regulators with minimum supported voltage.
> > ++ * Update the regulator-min-microvolt with SVS voltage of 725mV so that
> > ++ * the regulators are brought up with 725mV which is sufficient for all the
> > ++ * corner parts to operate at 800MHz
> > ++ */
> > ++ regulator-min-microvolt = <725000>;
> > ++ regulator-max-microvolt = <1075000>;
> > ++ };
> > ++ };
> > ++};
> > ++
> > ++&sleep_clk {
> > ++ clock-frequency = <32000>;
> > ++};
> > ++
> > ++&tlmm {
> > ++ spi_0_pins: spi-0-state {
> > ++ pins = "gpio11", "gpio12", "gpio13", "gpio14";
> > ++ function = "blsp0_spi";
> > ++ drive-strength = <8>;
> > ++ bias-disable;
> > ++ };
> > ++};
> > ++
> > ++&xo_board_clk {
> > ++ clock-frequency = <24000000>;
> > ++};
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0027-arm64-dts-qcom-ipq9574-add-few-more-reserved-memory-.patch b/target/linux/ipq95xx/patches-6.1/0027-arm64-dts-qcom-ipq9574-add-few-more-reserved-memory-.patch
> > new file mode 100644
> > index 0000000000..e1b7d0da56
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0027-arm64-dts-qcom-ipq9574-add-few-more-reserved-memory-.patch
> > @@ -0,0 +1,60 @@
> > +From cf53f8937fa9241f6d873a469c04d509e3062539 Mon Sep 17 00:00:00 2001
> > +From: Anusha Rao <quic_anusha at quicinc.com>
> > +Date: Fri, 2 Jun 2023 14:14:31 +0530
> > +Subject: [PATCH 27/41] arm64: dts: qcom: ipq9574: add few more reserved memory
> > + region
> > +
> > +In IPQ SoCs, bootloader will collect the system RAM contents upon crash
> > +for post-morterm analysis. If we don't reserve the memory region used
> > +by bootloader, obviously linux will consume it and upon next boot on
> > +crash, bootloader will be loaded in the same region, which will lead to
> > +loss of some data, sometimes we may miss out critical information.
> > +So lets reserve the region used by the bootloader.
> > +
> > +Similarly SBL copies some data into the reserved region and it will be
> > +used in the crash scenario. So reserve 1MB for SBL as well.
> > +
> > +While at it, drop the size padding in the reserved memory region,
> > +wherever applicable
> > +
> > +Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
> > +Reviewed-by: Kathiravan T <quic_kathirav at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230602084431.19134-1-quic_anusha@quicinc.com
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 12 +++++++++++-
> > + 1 file changed, 11 insertions(+), 1 deletion(-)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +index b6e4a8a73354..30430133e39a 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -148,6 +148,16 @@ reserved-memory {
> > + #size-cells = <2>;
> > + ranges;
> > +
> > ++ bootloader at 4a100000 {
> > ++ reg = <0x0 0x4a100000 0x0 0x400000>;
> > ++ no-map;
> > ++ };
> > ++
> > ++ sbl at 4a500000 {
> > ++ reg = <0x0 0x4a500000 0x0 0x100000>;
> > ++ no-map;
> > ++ };
> > ++
> > + tz_region: tz at 4a600000 {
> > + reg = <0x0 0x4a600000 0x0 0x400000>;
> > + no-map;
> > +@@ -155,7 +165,7 @@ tz_region: tz at 4a600000 {
> > +
> > + smem at 4aa00000 {
> > + compatible = "qcom,smem";
> > +- reg = <0x0 0x4aa00000 0x0 0x00100000>;
> > ++ reg = <0x0 0x4aa00000 0x0 0x100000>;
> > + hwlocks = <&tcsr_mutex 0>;
> > + no-map;
> > + };
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0028-arm64-dts-qcom-ipq9574-Use-assigned-clock-rates-for-.patch b/target/linux/ipq95xx/patches-6.1/0028-arm64-dts-qcom-ipq9574-Use-assigned-clock-rates-for-.patch
> > new file mode 100644
> > index 0000000000..2575f6903d
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0028-arm64-dts-qcom-ipq9574-Use-assigned-clock-rates-for-.patch
> > @@ -0,0 +1,59 @@
> > +From 366d78e84d2a737d75d72b2fb201aacac3a86696 Mon Sep 17 00:00:00 2001
> > +From: Devi Priya <quic_devipriy at quicinc.com>
> > +Date: Thu, 15 Jun 2023 14:18:41 +0530
> > +Subject: [PATCH 28/41] arm64: dts: qcom: ipq9574: Use assigned-clock-rates for
> > + QUP I2C core clks
> > +
> > +Use assigned-clock-rates property for configuring the QUP I2C core clocks
> > +to operate at nominal frequency.
> > +
> > +Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
> > +Link: https://lore.kernel.org/r/20230615084841.12375-1-quic_devipriy@quicinc.com
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 8 ++++++++
> > + 1 file changed, 8 insertions(+)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +index 30430133e39a..ced7779f87ac 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -358,6 +358,8 @@ blsp1_i2c1: i2c at 78b6000 {
> > + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
> > + <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "core", "iface";
> > ++ assigned-clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
> > ++ assigned-clock-rates = <50000000>;
> > + dmas = <&blsp_dma 14>, <&blsp_dma 15>;
> > + dma-names = "tx", "rx";
> > + status = "disabled";
> > +@@ -386,6 +388,8 @@ blsp1_i2c2: i2c at 78b7000 {
> > + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
> > + <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "core", "iface";
> > ++ assigned-clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
> > ++ assigned-clock-rates = <50000000>;
> > + dmas = <&blsp_dma 16>, <&blsp_dma 17>;
> > + dma-names = "tx", "rx";
> > + status = "disabled";
> > +@@ -414,6 +418,8 @@ blsp1_i2c3: i2c at 78b8000 {
> > + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
> > + <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "core", "iface";
> > ++ assigned-clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
> > ++ assigned-clock-rates = <50000000>;
> > + dmas = <&blsp_dma 18>, <&blsp_dma 19>;
> > + dma-names = "tx", "rx";
> > + status = "disabled";
> > +@@ -443,6 +449,8 @@ blsp1_i2c4: i2c at 78b9000 {
> > + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
> > + <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "core", "iface";
> > ++ assigned-clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
> > ++ assigned-clock-rates = <50000000>;
> > + dmas = <&blsp_dma 20>, <&blsp_dma 21>;
> > + dma-names = "tx", "rx";
> > + status = "disabled";
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0029-arm64-dts-qcom-ipq9574-Fix-hwlock-index-for-SMEM.patch b/target/linux/ipq95xx/patches-6.1/0029-arm64-dts-qcom-ipq9574-Fix-hwlock-index-for-SMEM.patch
> > new file mode 100644
> > index 0000000000..46eb3c9ce2
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0029-arm64-dts-qcom-ipq9574-Fix-hwlock-index-for-SMEM.patch
> > @@ -0,0 +1,36 @@
> > +From 4de55890566a8ca941af940c1ada4826c069969e Mon Sep 17 00:00:00 2001
> > +From: Vignesh Viswanathan <quic_viswanat at quicinc.com>
> > +Date: Mon, 4 Sep 2023 22:55:15 +0530
> > +Subject: [PATCH 29/41] arm64: dts: qcom: ipq9574: Fix hwlock index for SMEM
> > +
> > +SMEM uses lock index 3 of the TCSR Mutex hwlock for allocations
> > +in SMEM region shared by the Host and FW.
> > +
> > +Fix the SMEM hwlock index to 3 for IPQ9574.
> > +
> > +Cc: stable at vger.kernel.org
> > +Fixes: 46384ac7a618 ("arm64: dts: qcom: ipq9574: Add SMEM support")
> > +Signed-off-by: Vignesh Viswanathan <quic_viswanat at quicinc.com>
> > +Acked-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Link: https://lore.kernel.org/r/20230904172516.479866-5-quic_viswanat@quicinc.com
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 2 +-
> > + 1 file changed, 1 insertion(+), 1 deletion(-)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +index ced7779f87ac..3b4ebf165380 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -166,7 +166,7 @@ tz_region: tz at 4a600000 {
> > + smem at 4aa00000 {
> > + compatible = "qcom,smem";
> > + reg = <0x0 0x4aa00000 0x0 0x100000>;
> > +- hwlocks = <&tcsr_mutex 0>;
> > ++ hwlocks = <&tcsr_mutex 3>;
> > + no-map;
> > + };
> > + };
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0030-arm64-dts-qcom-ipq9574-include-the-GPLL0-as-clock-pr.patch b/target/linux/ipq95xx/patches-6.1/0030-arm64-dts-qcom-ipq9574-include-the-GPLL0-as-clock-pr.patch
> > new file mode 100644
> > index 0000000000..74e5b6d636
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0030-arm64-dts-qcom-ipq9574-include-the-GPLL0-as-clock-pr.patch
> > @@ -0,0 +1,40 @@
> > +From ceeec9e4dbd9561b9483b3ad8648e66eba3c8016 Mon Sep 17 00:00:00 2001
> > +From: Kathiravan Thirumoorthy <quic_kathirav at quicinc.com>
> > +Date: Thu, 14 Sep 2023 12:30:00 +0530
> > +Subject: [PATCH 30/41] arm64: dts: qcom: ipq9574: include the GPLL0 as clock
> > + provider for mailbox
> > +
> > +While the kernel is booting up, APSS clock / CPU clock will be running
> > +at 800MHz with GPLL0 as source. Once the cpufreq driver is available,
> > +APSS PLL will be configured to the rate based on the opp table and the
> > +source also will be changed to APSS_PLL_EARLY. So allow the mailbox to
> > +consume the GPLL0, with this inclusion, CPU Freq correctly reports that
> > +CPU is running at 800MHz rather than 24MHz.
> > +
> > +Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav at quicinc.com>
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-10-c8ceb1a37680@quicinc.com
> > +[bjorn: Updated commit message, as requested by Kathiravan]
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 4 ++--
> > + 1 file changed, 2 insertions(+), 2 deletions(-)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +index 3b4ebf165380..452ac4deed0b 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -507,8 +507,8 @@ apcs_glb: mailbox at b111000 {
> > + "qcom,ipq6018-apcs-apps-global";
> > + reg = <0x0b111000 0x1000>;
> > + #clock-cells = <1>;
> > +- clocks = <&a73pll>, <&xo_board_clk>;
> > +- clock-names = "pll", "xo";
> > ++ clocks = <&a73pll>, <&xo_board_clk>, <&gcc GPLL0>;
> > ++ clock-names = "pll", "xo", "gpll0";
> > + #mbox-cells = <1>;
> > + };
> > +
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0031-clk-qcom-apss-ipq6018-add-the-GPLL0-clock-also-as-cl.patch b/target/linux/ipq95xx/patches-6.1/0031-clk-qcom-apss-ipq6018-add-the-GPLL0-clock-also-as-cl.patch
> > new file mode 100644
> > index 0000000000..c9a341af11
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0031-clk-qcom-apss-ipq6018-add-the-GPLL0-clock-also-as-cl.patch
> > @@ -0,0 +1,50 @@
> > +From 618e80e9a977954c06fd6fa5d65b6f712562bdaf Mon Sep 17 00:00:00 2001
> > +From: Kathiravan Thirumoorthy <quic_kathirav at quicinc.com>
> > +Date: Thu, 14 Sep 2023 12:29:57 +0530
> > +Subject: [PATCH 31/41] clk: qcom: apss-ipq6018: add the GPLL0 clock also as
> > + clock provider
> > +
> > +While the kernel is booting up, APSS PLL will be running at 800MHz with
> > +GPLL0 as source. Once the cpufreq driver is available, APSS PLL will be
> > +configured and select the rate based on the opp table and the source will
> > +be changed to APSS_PLL_EARLY.
> > +
> > +Without this patch, CPU Freq driver reports that CPU is running at 24MHz
> > +instead of the 800MHz.
> > +
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Tested-by: Robert Marko <robimarko at gmail.com>
> > +Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav at quicinc.com>
> > +Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-7-c8ceb1a37680@quicinc.com
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +---
> > + drivers/clk/qcom/apss-ipq6018.c | 3 +++
> > + 1 file changed, 3 insertions(+)
> > +
> > +diff --git a/drivers/clk/qcom/apss-ipq6018.c b/drivers/clk/qcom/apss-ipq6018.c
> > +index f2f502e2d5a4..4e13a085a857 100644
> > +--- a/drivers/clk/qcom/apss-ipq6018.c
> > ++++ b/drivers/clk/qcom/apss-ipq6018.c
> > +@@ -20,16 +20,19 @@
> > +
> > + enum {
> > + P_XO,
> > ++ P_GPLL0,
> > + P_APSS_PLL_EARLY,
> > + };
> > +
> > + static const struct clk_parent_data parents_apcs_alias0_clk_src[] = {
> > + { .fw_name = "xo" },
> > ++ { .fw_name = "gpll0" },
> > + { .fw_name = "pll" },
> > + };
> > +
> > + static const struct parent_map parents_apcs_alias0_clk_src_map[] = {
> > + { P_XO, 0 },
> > ++ { P_GPLL0, 4 },
> > + { P_APSS_PLL_EARLY, 5 },
> > + };
> > +
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0032-clk-qcom-ipq9574-drop-the-CLK_SET_RATE_PARENT-flag-f.patch b/target/linux/ipq95xx/patches-6.1/0032-clk-qcom-ipq9574-drop-the-CLK_SET_RATE_PARENT-flag-f.patch
> > new file mode 100644
> > index 0000000000..38bd8a5b51
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0032-clk-qcom-ipq9574-drop-the-CLK_SET_RATE_PARENT-flag-f.patch
> > @@ -0,0 +1,62 @@
> > +From f0869d5304a548b18bd0402ed2ebe6e6fa66ec04 Mon Sep 17 00:00:00 2001
> > +From: Kathiravan Thirumoorthy <quic_kathirav at quicinc.com>
> > +Date: Thu, 14 Sep 2023 12:29:54 +0530
> > +Subject: [PATCH 32/41] clk: qcom: ipq9574: drop the CLK_SET_RATE_PARENT flag
> > + from GPLL clocks
> > +
> > +GPLL clock rates are fixed and shouldn't be scaled based on the request
> > +from dependent clocks. Doing so will result in the unexpected behaviour.
> > +So drop the CLK_SET_RATE_PARENT flag from the GPLL clocks.
> > +
> > +----
> > +Changes in V2:
> > + - No changes
> > +
> > +Fixes: d75b82cff488 ("clk: qcom: Add Global Clock Controller driver for IPQ9574")
> > +Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav at quicinc.com>
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Link: https://lore.kernel.org/r/20230913-gpll_cleanup-v2-4-c8ceb1a37680@quicinc.com
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +---
> > + drivers/clk/qcom/gcc-ipq9574.c | 4 ----
> > + 1 file changed, 4 deletions(-)
> > +
> > +diff --git a/drivers/clk/qcom/gcc-ipq9574.c b/drivers/clk/qcom/gcc-ipq9574.c
> > +index b2a2d618a5ec..806b8ba9633c 100644
> > +--- a/drivers/clk/qcom/gcc-ipq9574.c
> > ++++ b/drivers/clk/qcom/gcc-ipq9574.c
> > +@@ -87,7 +87,6 @@ static struct clk_fixed_factor gpll0_out_main_div2 = {
> > + &gpll0_main.clkr.hw
> > + },
> > + .num_parents = 1,
> > +- .flags = CLK_SET_RATE_PARENT,
> > + .ops = &clk_fixed_factor_ops,
> > + },
> > + };
> > +@@ -102,7 +101,6 @@ static struct clk_alpha_pll_postdiv gpll0 = {
> > + &gpll0_main.clkr.hw
> > + },
> > + .num_parents = 1,
> > +- .flags = CLK_SET_RATE_PARENT,
> > + .ops = &clk_alpha_pll_postdiv_ro_ops,
> > + },
> > + };
> > +@@ -132,7 +130,6 @@ static struct clk_alpha_pll_postdiv gpll4 = {
> > + &gpll4_main.clkr.hw
> > + },
> > + .num_parents = 1,
> > +- .flags = CLK_SET_RATE_PARENT,
> > + .ops = &clk_alpha_pll_postdiv_ro_ops,
> > + },
> > + };
> > +@@ -162,7 +159,6 @@ static struct clk_alpha_pll_postdiv gpll2 = {
> > + &gpll2_main.clkr.hw
> > + },
> > + .num_parents = 1,
> > +- .flags = CLK_SET_RATE_PARENT,
> > + .ops = &clk_alpha_pll_postdiv_ro_ops,
> > + },
> > + };
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0033-firmware-qcom_scm-use-64-bit-calling-convention-only.patch b/target/linux/ipq95xx/patches-6.1/0033-firmware-qcom_scm-use-64-bit-calling-convention-only.patch
> > new file mode 100644
> > index 0000000000..b103ec6728
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0033-firmware-qcom_scm-use-64-bit-calling-convention-only.patch
> > @@ -0,0 +1,53 @@
> > +From e9449be0c59beb0de16b7719ae5d9555a1a1ada7 Mon Sep 17 00:00:00 2001
> > +From: Kathiravan Thirumoorthy <quic_kathirav at quicinc.com>
> > +Date: Mon, 25 Sep 2023 13:59:22 +0530
> > +Subject: [PATCH 33/41] firmware: qcom_scm: use 64-bit calling convention only
> > + when client is 64-bit
> > +
> > +Per the "SMC calling convention specification", the 64-bit calling
> > +convention can only be used when the client is 64-bit. Whereas the
> > +32-bit calling convention can be used by either a 32-bit or a 64-bit
> > +client.
> > +
> > +Currently during SCM probe, irrespective of the client, 64-bit calling
> > +convention is made, which is incorrect and may lead to the undefined
> > +behaviour when the client is 32-bit. Let's fix it.
> > +
> > +Cc: stable at vger.kernel.org
> > +Fixes: 9a434cee773a ("firmware: qcom_scm: Dynamically support SMCCC and legacy conventions")
> > +Reviewed-By: Elliot Berman <quic_eberman at quicinc.com>
> > +Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav at quicinc.com>
> > +Link: https://lore.kernel.org/r/20230925-scm-v3-1-8790dff6a749@quicinc.com
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +---
> > + drivers/firmware/qcom_scm.c | 7 +++++++
> > + 1 file changed, 7 insertions(+)
> > +
> > +diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> > +index 51eb85354c05..58f1a86065dc 100644
> > +--- a/drivers/firmware/qcom_scm.c
> > ++++ b/drivers/firmware/qcom_scm.c
> > +@@ -164,6 +164,12 @@ static enum qcom_scm_convention __get_convention(void)
> > + if (likely(qcom_scm_convention != SMC_CONVENTION_UNKNOWN))
> > + return qcom_scm_convention;
> > +
> > ++ /*
> > ++ * Per the "SMC calling convention specification", the 64-bit calling
> > ++ * convention can only be used when the client is 64-bit, otherwise
> > ++ * system will encounter the undefined behaviour.
> > ++ */
> > ++#if IS_ENABLED(CONFIG_ARM64)
> > + /*
> > + * Device isn't required as there is only one argument - no device
> > + * needed to dma_map_single to secure world
> > +@@ -184,6 +190,7 @@ static enum qcom_scm_convention __get_convention(void)
> > + forced = true;
> > + goto found;
> > + }
> > ++#endif
> > +
> > + probed_convention = SMC_CONVENTION_ARM_32;
> > + ret = __scm_smc_call(NULL, &desc, probed_convention, &res, true);
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0034-arm64-dts-qcom-ipq9574-Add-common-RDP-dtsi-file.patch b/target/linux/ipq95xx/patches-6.1/0034-arm64-dts-qcom-ipq9574-Add-common-RDP-dtsi-file.patch
> > new file mode 100644
> > index 0000000000..f1b55835fc
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0034-arm64-dts-qcom-ipq9574-Add-common-RDP-dtsi-file.patch
> > @@ -0,0 +1,519 @@
> > +From 0f868f286529001ee37334815f4962b8a2f283dd Mon Sep 17 00:00:00 2001
> > +From: Anusha Rao <quic_anusha at quicinc.com>
> > +Date: Wed, 27 Sep 2023 12:13:18 +0530
> > +Subject: [PATCH 34/41] arm64: dts: qcom: ipq9574: Add common RDP dtsi file
> > +
> > +Add a dtsi file to include interfaces that are common
> > +across RDPs.
> > +
> > +Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
> > +Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav at quicinc.com>
> > +Link: https://lore.kernel.org/r/20230927-common-rdp-v3-1-3d07b3ff6d42@quicinc.com
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +---
> > + .../boot/dts/qcom/ipq9574-rdp-common.dtsi | 102 ++++++++++++++++++
> > + arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts | 63 +----------
> > + arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 38 +------
> > + arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts | 65 +----------
> > + arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts | 65 +----------
> > + arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts | 66 +-----------
> > + 6 files changed, 107 insertions(+), 292 deletions(-)
> > + create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> > +new file mode 100644
> > +index 000000000000..c935ac53efe6
> > +--- /dev/null
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> > +@@ -0,0 +1,102 @@
> > ++// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > ++/*
> > ++ * IPQ9574 RDP board common device tree source
> > ++ *
> > ++ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
> > ++ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
> > ++ */
> > ++
> > ++/dts-v1/;
> > ++
> > ++#include "ipq9574.dtsi"
> > ++
> > ++/ {
> > ++ aliases {
> > ++ serial0 = &blsp1_uart2;
> > ++ };
> > ++
> > ++ chosen {
> > ++ stdout-path = "serial0:115200n8";
> > ++ };
> > ++
> > ++ regulator_fixed_3p3: s3300 {
> > ++ compatible = "regulator-fixed";
> > ++ regulator-min-microvolt = <3300000>;
> > ++ regulator-max-microvolt = <3300000>;
> > ++ regulator-boot-on;
> > ++ regulator-always-on;
> > ++ regulator-name = "fixed_3p3";
> > ++ };
> > ++
> > ++ regulator_fixed_0p925: s0925 {
> > ++ compatible = "regulator-fixed";
> > ++ regulator-min-microvolt = <925000>;
> > ++ regulator-max-microvolt = <925000>;
> > ++ regulator-boot-on;
> > ++ regulator-always-on;
> > ++ regulator-name = "fixed_0p925";
> > ++ };
> > ++};
> > ++
> > ++&blsp1_spi0 {
> > ++ pinctrl-0 = <&spi_0_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "okay";
> > ++
> > ++ flash at 0 {
> > ++ compatible = "micron,n25q128a11", "jedec,spi-nor";
> > ++ reg = <0>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <1>;
> > ++ spi-max-frequency = <50000000>;
> > ++ };
> > ++};
> > ++
> > ++&blsp1_uart2 {
> > ++ pinctrl-0 = <&uart2_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "okay";
> > ++};
> > ++
> > ++&rpm_requests {
> > ++ regulators {
> > ++ compatible = "qcom,rpm-mp5496-regulators";
> > ++
> > ++ ipq9574_s1: s1 {
> > ++ /*
> > ++ * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> > ++ * During regulator registration, kernel not knowing the initial voltage,
> > ++ * considers it as zero and brings up the regulators with minimum supported voltage.
> > ++ * Update the regulator-min-microvolt with SVS voltage of 725mV so that
> > ++ * the regulators are brought up with 725mV which is sufficient for all the
> > ++ * corner parts to operate at 800MHz
> > ++ */
> > ++ regulator-min-microvolt = <725000>;
> > ++ regulator-max-microvolt = <1075000>;
> > ++ };
> > ++
> > ++ mp5496_l2: l2 {
> > ++ regulator-min-microvolt = <1800000>;
> > ++ regulator-max-microvolt = <1800000>;
> > ++ regulator-always-on;
> > ++ regulator-boot-on;
> > ++ };
> > ++ };
> > ++};
> > ++
> > ++&sleep_clk {
> > ++ clock-frequency = <32000>;
> > ++};
> > ++
> > ++&tlmm {
> > ++ spi_0_pins: spi-0-state {
> > ++ pins = "gpio11", "gpio12", "gpio13", "gpio14";
> > ++ function = "blsp0_spi";
> > ++ drive-strength = <8>;
> > ++ bias-disable;
> > ++ };
> > ++};
> > ++
> > ++&xo_board_clk {
> > ++ clock-frequency = <24000000>;
> > ++};
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
> > +index 2b093e02637b..f4f9199d4ab1 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
> > +@@ -8,58 +8,12 @@
> > +
> > + /dts-v1/;
> > +
> > +-#include "ipq9574.dtsi"
> > ++#include "ipq9574-rdp-common.dtsi"
> > +
> > + / {
> > + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2";
> > + compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574";
> > +
> > +- aliases {
> > +- serial0 = &blsp1_uart2;
> > +- };
> > +-
> > +- chosen {
> > +- stdout-path = "serial0:115200n8";
> > +- };
> > +-};
> > +-
> > +-&blsp1_spi0 {
> > +- pinctrl-0 = <&spi_0_pins>;
> > +- pinctrl-names = "default";
> > +- status = "okay";
> > +-
> > +- flash at 0 {
> > +- compatible = "micron,n25q128a11", "jedec,spi-nor";
> > +- reg = <0>;
> > +- #address-cells = <1>;
> > +- #size-cells = <1>;
> > +- spi-max-frequency = <50000000>;
> > +- };
> > +-};
> > +-
> > +-&blsp1_uart2 {
> > +- pinctrl-0 = <&uart2_pins>;
> > +- pinctrl-names = "default";
> > +- status = "okay";
> > +-};
> > +-
> > +-&rpm_requests {
> > +- regulators {
> > +- compatible = "qcom,rpm-mp5496-regulators";
> > +-
> > +- ipq9574_s1: s1 {
> > +- /*
> > +- * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> > +- * During regulator registration, kernel not knowing the initial voltage,
> > +- * considers it as zero and brings up the regulators with minimum supported voltage.
> > +- * Update the regulator-min-microvolt with SVS voltage of 725mV so that
> > +- * the regulators are brought up with 725mV which is sufficient for all the
> > +- * corner parts to operate at 800MHz
> > +- */
> > +- regulator-min-microvolt = <725000>;
> > +- regulator-max-microvolt = <1075000>;
> > +- };
> > +- };
> > + };
> > +
> > + &sdhc_1 {
> > +@@ -74,10 +28,6 @@ &sdhc_1 {
> > + status = "okay";
> > + };
> > +
> > +-&sleep_clk {
> > +- clock-frequency = <32000>;
> > +-};
> > +-
> > + &tlmm {
> > + sdc_default_state: sdc-default-state {
> > + clk-pins {
> > +@@ -110,15 +60,4 @@ rclk-pins {
> > + bias-pull-down;
> > + };
> > + };
> > +-
> > +- spi_0_pins: spi-0-state {
> > +- pins = "gpio11", "gpio12", "gpio13", "gpio14";
> > +- function = "blsp0_spi";
> > +- drive-strength = <8>;
> > +- bias-disable;
> > +- };
> > +-};
> > +-
> > +-&xo_board_clk {
> > +- clock-frequency = <24000000>;
> > + };
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > +index 2b3ed8d351f7..16217471893d 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > +@@ -8,44 +8,12 @@
> > +
> > + /dts-v1/;
> > +
> > +-#include "ipq9574.dtsi"
> > ++#include "ipq9574-rdp-common.dtsi"
> > +
> > + / {
> > + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
> > + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
> > +
> > +- aliases {
> > +- serial0 = &blsp1_uart2;
> > +- };
> > +-
> > +- chosen {
> > +- stdout-path = "serial0:115200n8";
> > +- };
> > +-};
> > +-
> > +-&blsp1_uart2 {
> > +- pinctrl-0 = <&uart2_pins>;
> > +- pinctrl-names = "default";
> > +- status = "okay";
> > +-};
> > +-
> > +-&rpm_requests {
> > +- regulators {
> > +- compatible = "qcom,rpm-mp5496-regulators";
> > +-
> > +- ipq9574_s1: s1 {
> > +- /*
> > +- * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> > +- * During regulator registration, kernel not knowing the initial voltage,
> > +- * considers it as zero and brings up the regulators with minimum supported voltage.
> > +- * Update the regulator-min-microvolt with SVS voltage of 725mV so that
> > +- * the regulators are brought up with 725mV which is sufficient for all the
> > +- * corner parts to operate at 800MHz
> > +- */
> > +- regulator-min-microvolt = <725000>;
> > +- regulator-max-microvolt = <1075000>;
> > +- };
> > +- };
> > + };
> > +
> > + &sdhc_1 {
> > +@@ -97,7 +65,3 @@ rclk-pins {
> > + };
> > + };
> > + };
> > +-
> > +-&xo_board_clk {
> > +- clock-frequency = <24000000>;
> > +-};
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
> > +index c8fa54e1a62c..d36d1078763e 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
> > +@@ -8,73 +8,10 @@
> > +
> > + /dts-v1/;
> > +
> > +-#include "ipq9574.dtsi"
> > ++#include "ipq9574-rdp-common.dtsi"
> > +
> > + / {
> > + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6";
> > + compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574";
> > +
> > +- aliases {
> > +- serial0 = &blsp1_uart2;
> > +- };
> > +-
> > +- chosen {
> > +- stdout-path = "serial0:115200n8";
> > +- };
> > +-};
> > +-
> > +-&blsp1_spi0 {
> > +- pinctrl-0 = <&spi_0_pins>;
> > +- pinctrl-names = "default";
> > +- status = "okay";
> > +-
> > +- flash at 0 {
> > +- compatible = "micron,n25q128a11", "jedec,spi-nor";
> > +- reg = <0>;
> > +- #address-cells = <1>;
> > +- #size-cells = <1>;
> > +- spi-max-frequency = <50000000>;
> > +- };
> > +-};
> > +-
> > +-&blsp1_uart2 {
> > +- pinctrl-0 = <&uart2_pins>;
> > +- pinctrl-names = "default";
> > +- status = "okay";
> > +-};
> > +-
> > +-&rpm_requests {
> > +- regulators {
> > +- compatible = "qcom,rpm-mp5496-regulators";
> > +-
> > +- ipq9574_s1: s1 {
> > +- /*
> > +- * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> > +- * During regulator registration, kernel not knowing the initial voltage,
> > +- * considers it as zero and brings up the regulators with minimum supported voltage.
> > +- * Update the regulator-min-microvolt with SVS voltage of 725mV so that
> > +- * the regulators are brought up with 725mV which is sufficient for all the
> > +- * corner parts to operate at 800MHz
> > +- */
> > +- regulator-min-microvolt = <725000>;
> > +- regulator-max-microvolt = <1075000>;
> > +- };
> > +- };
> > +-};
> > +-
> > +-&sleep_clk {
> > +- clock-frequency = <32000>;
> > +-};
> > +-
> > +-&tlmm {
> > +- spi_0_pins: spi-0-state {
> > +- pins = "gpio11", "gpio12", "gpio13", "gpio14";
> > +- function = "blsp0_spi";
> > +- drive-strength = <8>;
> > +- bias-disable;
> > +- };
> > +-};
> > +-
> > +-&xo_board_clk {
> > +- clock-frequency = <24000000>;
> > + };
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
> > +index f01de6628c3b..c30c9fbedf26 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
> > +@@ -8,73 +8,10 @@
> > +
> > + /dts-v1/;
> > +
> > +-#include "ipq9574.dtsi"
> > ++#include "ipq9574-rdp-common.dtsi"
> > +
> > + / {
> > + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8";
> > + compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574";
> > +
> > +- aliases {
> > +- serial0 = &blsp1_uart2;
> > +- };
> > +-
> > +- chosen {
> > +- stdout-path = "serial0:115200n8";
> > +- };
> > +-};
> > +-
> > +-&blsp1_spi0 {
> > +- pinctrl-0 = <&spi_0_pins>;
> > +- pinctrl-names = "default";
> > +- status = "okay";
> > +-
> > +- flash at 0 {
> > +- compatible = "micron,n25q128a11", "jedec,spi-nor";
> > +- reg = <0>;
> > +- #address-cells = <1>;
> > +- #size-cells = <1>;
> > +- spi-max-frequency = <50000000>;
> > +- };
> > +-};
> > +-
> > +-&blsp1_uart2 {
> > +- pinctrl-0 = <&uart2_pins>;
> > +- pinctrl-names = "default";
> > +- status = "okay";
> > +-};
> > +-
> > +-&rpm_requests {
> > +- regulators {
> > +- compatible = "qcom,rpm-mp5496-regulators";
> > +-
> > +- ipq9574_s1: s1 {
> > +- /*
> > +- * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> > +- * During regulator registration, kernel not knowing the initial voltage,
> > +- * considers it as zero and brings up the regulators with minimum supported voltage.
> > +- * Update the regulator-min-microvolt with SVS voltage of 725mV so that
> > +- * the regulators are brought up with 725mV which is sufficient for all the
> > +- * corner parts to operate at 800MHz
> > +- */
> > +- regulator-min-microvolt = <725000>;
> > +- regulator-max-microvolt = <1075000>;
> > +- };
> > +- };
> > +-};
> > +-
> > +-&sleep_clk {
> > +- clock-frequency = <32000>;
> > +-};
> > +-
> > +-&tlmm {
> > +- spi_0_pins: spi-0-state {
> > +- pins = "gpio11", "gpio12", "gpio13", "gpio14";
> > +- function = "blsp0_spi";
> > +- drive-strength = <8>;
> > +- bias-disable;
> > +- };
> > +-};
> > +-
> > +-&xo_board_clk {
> > +- clock-frequency = <24000000>;
> > + };
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
> > +index 6efae3426cb8..0dc382f5d5ec 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
> > +@@ -8,73 +8,9 @@
> > +
> > + /dts-v1/;
> > +
> > +-#include "ipq9574.dtsi"
> > ++#include "ipq9574-rdp-common.dtsi"
> > +
> > + / {
> > + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9";
> > + compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574";
> > +-
> > +- aliases {
> > +- serial0 = &blsp1_uart2;
> > +- };
> > +-
> > +- chosen {
> > +- stdout-path = "serial0:115200n8";
> > +- };
> > +-};
> > +-
> > +-&blsp1_spi0 {
> > +- pinctrl-0 = <&spi_0_pins>;
> > +- pinctrl-names = "default";
> > +- status = "okay";
> > +-
> > +- flash at 0 {
> > +- compatible = "micron,n25q128a11", "jedec,spi-nor";
> > +- reg = <0>;
> > +- #address-cells = <1>;
> > +- #size-cells = <1>;
> > +- spi-max-frequency = <50000000>;
> > +- };
> > +-};
> > +-
> > +-&blsp1_uart2 {
> > +- pinctrl-0 = <&uart2_pins>;
> > +- pinctrl-names = "default";
> > +- status = "okay";
> > +-};
> > +-
> > +-&rpm_requests {
> > +- regulators {
> > +- compatible = "qcom,rpm-mp5496-regulators";
> > +-
> > +- ipq9574_s1: s1 {
> > +- /*
> > +- * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> > +- * During regulator registration, kernel not knowing the initial voltage,
> > +- * considers it as zero and brings up the regulators with minimum supported voltage.
> > +- * Update the regulator-min-microvolt with SVS voltage of 725mV so that
> > +- * the regulators are brought up with 725mV which is sufficient for all the
> > +- * corner parts to operate at 800MHz
> > +- */
> > +- regulator-min-microvolt = <725000>;
> > +- regulator-max-microvolt = <1075000>;
> > +- };
> > +- };
> > +-};
> > +-
> > +-&sleep_clk {
> > +- clock-frequency = <32000>;
> > +-};
> > +-
> > +-&tlmm {
> > +- spi_0_pins: spi-0-state {
> > +- pins = "gpio11", "gpio12", "gpio13", "gpio14";
> > +- function = "blsp0_spi";
> > +- drive-strength = <8>;
> > +- bias-disable;
> > +- };
> > +-};
> > +-
> > +-&xo_board_clk {
> > +- clock-frequency = <24000000>;
> > + };
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0035-arm64-dts-qcom-ipq9574-populate-the-opp-table-based-.patch b/target/linux/ipq95xx/patches-6.1/0035-arm64-dts-qcom-ipq9574-populate-the-opp-table-based-.patch
> > new file mode 100644
> > index 0000000000..c4eb599500
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0035-arm64-dts-qcom-ipq9574-populate-the-opp-table-based-.patch
> > @@ -0,0 +1,110 @@
> > +From f1001470268206073905a37fdba06355eb43d32c Mon Sep 17 00:00:00 2001
> > +From: Varadarajan Narayanan <quic_varada at quicinc.com>
> > +Date: Fri, 20 Oct 2023 11:49:39 +0530
> > +Subject: [PATCH 35/41] arm64: dts: qcom: ipq9574: populate the opp table based
> > + on the eFuse
> > +
> > +IPQ95xx SoCs have different OPPs available for the CPU based on
> > +SoC variant. This can be determined from an eFuse register
> > +present in the silicon.
> > +
> > +Add support to read the eFuse and populate the OPPs based on it.
> > +
> > +Frequency 1.2GHz 1.8GHz 1.5GHz No opp-supported-hw
> > + Limit
> > +------------------------------------------------------------
> > +936000000 1 1 1 1 0xf
> > +1104000000 1 1 1 1 0xf
> > +1200000000 1 1 1 1 0xf
> > +1416000000 0 1 1 1 0x7
> > +1488000000 0 1 1 1 0x7
> > +1800000000 0 1 0 1 0x5
> > +2208000000 0 0 0 1 0x1
> > +-----------------------------------------------------------
> > +
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Signed-off-by: Kathiravan T <quic_kathirav at quicinc.com>
> > +Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> > +Link: https://lore.kernel.org/r/14ab08b7cfd904433ca6065fac798d4f221c9d95.1697781921.git.quic_varada@quicinc.com
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +---
> > + arch/arm64/boot/dts/qcom/ipq9574.dtsi | 21 ++++++++++++++++++++-
> > + 1 file changed, 20 insertions(+), 1 deletion(-)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +index 452ac4deed0b..a4123453f5e8 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> > +@@ -93,42 +93,56 @@ memory at 40000000 {
> > + };
> > +
> > + cpu_opp_table: opp-table-cpu {
> > +- compatible = "operating-points-v2";
> > ++ compatible = "operating-points-v2-kryo-cpu";
> > + opp-shared;
> > ++ nvmem-cells = <&cpu_speed_bin>;
> > +
> > + opp-936000000 {
> > + opp-hz = /bits/ 64 <936000000>;
> > + opp-microvolt = <725000>;
> > ++ opp-supported-hw = <0xf>;
> > + clock-latency-ns = <200000>;
> > + };
> > +
> > + opp-1104000000 {
> > + opp-hz = /bits/ 64 <1104000000>;
> > + opp-microvolt = <787500>;
> > ++ opp-supported-hw = <0xf>;
> > ++ clock-latency-ns = <200000>;
> > ++ };
> > ++
> > ++ opp-1200000000 {
> > ++ opp-hz = /bits/ 64 <1200000000>;
> > ++ opp-microvolt = <862500>;
> > ++ opp-supported-hw = <0xf>;
> > + clock-latency-ns = <200000>;
> > + };
> > +
> > + opp-1416000000 {
> > + opp-hz = /bits/ 64 <1416000000>;
> > + opp-microvolt = <862500>;
> > ++ opp-supported-hw = <0x7>;
> > + clock-latency-ns = <200000>;
> > + };
> > +
> > + opp-1488000000 {
> > + opp-hz = /bits/ 64 <1488000000>;
> > + opp-microvolt = <925000>;
> > ++ opp-supported-hw = <0x7>;
> > + clock-latency-ns = <200000>;
> > + };
> > +
> > + opp-1800000000 {
> > + opp-hz = /bits/ 64 <1800000000>;
> > + opp-microvolt = <987500>;
> > ++ opp-supported-hw = <0x5>;
> > + clock-latency-ns = <200000>;
> > + };
> > +
> > + opp-2208000000 {
> > + opp-hz = /bits/ 64 <2208000000>;
> > + opp-microvolt = <1062500>;
> > ++ opp-supported-hw = <0x1>;
> > + clock-latency-ns = <200000>;
> > + };
> > + };
> > +@@ -206,6 +220,11 @@ qfprom: efuse at a4000 {
> > + reg = <0x000a4000 0x5a1>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > ++
> > ++ cpu_speed_bin: cpu-speed-bin at 15 {
> > ++ reg = <0x15 0x2>;
> > ++ bits = <7 2>;
> > ++ };
> > + };
> > +
> > + tlmm: pinctrl at 1000000 {
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0036-clk-qcom-clk-alpha-pll-introduce-stromer-plus-ops.patch b/target/linux/ipq95xx/patches-6.1/0036-clk-qcom-clk-alpha-pll-introduce-stromer-plus-ops.patch
> > new file mode 100644
> > index 0000000000..d4f8544978
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0036-clk-qcom-clk-alpha-pll-introduce-stromer-plus-ops.patch
> > @@ -0,0 +1,106 @@
> > +From 539a79c58042c7902bfff6453a589d5dc2e0230c Mon Sep 17 00:00:00 2001
> > +From: Varadarajan Narayanan <quic_varada at quicinc.com>
> > +Date: Fri, 20 Oct 2023 11:49:32 +0530
> > +Subject: [PATCH 36/41] clk: qcom: clk-alpha-pll: introduce stromer plus ops
> > +
> > +Stromer plus APSS PLL does not support dynamic frequency scaling.
> > +To switch between frequencies, we have to shut down the PLL,
> > +configure the L and ALPHA values and turn on again. So introduce the
> > +separate set of ops for Stromer Plus PLL.
> > +
> > +Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > +Signed-off-by: Kathiravan T <quic_kathirav at quicinc.com>
> > +Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> > +Link: https://lore.kernel.org/r/2affa6c63ff0c4342230623a7d4eef02ec7c02d4.1697781921.git.quic_varada@quicinc.com
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +---
> > + drivers/clk/qcom/clk-alpha-pll.c | 63 ++++++++++++++++++++++++++++++++
> > + drivers/clk/qcom/clk-alpha-pll.h | 1 +
> > + 2 files changed, 64 insertions(+)
> > +
> > +diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> > +index 8e5e7a26bcc4..56f1795847cd 100644
> > +--- a/drivers/clk/qcom/clk-alpha-pll.c
> > ++++ b/drivers/clk/qcom/clk-alpha-pll.c
> > +@@ -2434,3 +2434,66 @@ const struct clk_ops clk_alpha_pll_stromer_ops = {
> > + .set_rate = clk_alpha_pll_stromer_set_rate,
> > + };
> > + EXPORT_SYMBOL_GPL(clk_alpha_pll_stromer_ops);
> > ++
> > ++static int clk_alpha_pll_stromer_plus_set_rate(struct clk_hw *hw,
> > ++ unsigned long rate,
> > ++ unsigned long prate)
> > ++{
> > ++ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> > ++ u32 l, alpha_width = pll_alpha_width(pll);
> > ++ int ret, pll_mode;
> > ++ u64 a;
> > ++
> > ++ rate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
> > ++
> > ++ ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &pll_mode);
> > ++ if (ret)
> > ++ return ret;
> > ++
> > ++ regmap_write(pll->clkr.regmap, PLL_MODE(pll), 0);
> > ++
> > ++ /* Delay of 2 output clock ticks required until output is disabled */
> > ++ udelay(1);
> > ++
> > ++ regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
> > ++
> > ++ if (alpha_width > ALPHA_BITWIDTH)
> > ++ a <<= alpha_width - ALPHA_BITWIDTH;
> > ++
> > ++ regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
> > ++ regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll),
> > ++ a >> ALPHA_BITWIDTH);
> > ++
> > ++ regmap_write(pll->clkr.regmap, PLL_MODE(pll), PLL_BYPASSNL);
> > ++
> > ++ /* Wait five micro seconds or more */
> > ++ udelay(5);
> > ++ regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N,
> > ++ PLL_RESET_N);
> > ++
> > ++ /* The lock time should be less than 50 micro seconds worst case */
> > ++ usleep_range(50, 60);
> > ++
> > ++ ret = wait_for_pll_enable_lock(pll);
> > ++ if (ret) {
> > ++ pr_err("Wait for PLL enable lock failed [%s] %d\n",
> > ++ clk_hw_get_name(hw), ret);
> > ++ return ret;
> > ++ }
> > ++
> > ++ if (pll_mode & PLL_OUTCTRL)
> > ++ regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL,
> > ++ PLL_OUTCTRL);
> > ++
> > ++ return 0;
> > ++}
> > ++
> > ++const struct clk_ops clk_alpha_pll_stromer_plus_ops = {
> > ++ .prepare = clk_alpha_pll_enable,
> > ++ .unprepare = clk_alpha_pll_disable,
> > ++ .is_enabled = clk_alpha_pll_is_enabled,
> > ++ .recalc_rate = clk_alpha_pll_recalc_rate,
> > ++ .determine_rate = clk_alpha_pll_stromer_determine_rate,
> > ++ .set_rate = clk_alpha_pll_stromer_plus_set_rate,
> > ++};
> > ++EXPORT_SYMBOL_GPL(clk_alpha_pll_stromer_plus_ops);
> > +diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
> > +index 51d4043c7e4f..eb072ae7861c 100644
> > +--- a/drivers/clk/qcom/clk-alpha-pll.h
> > ++++ b/drivers/clk/qcom/clk-alpha-pll.h
> > +@@ -145,6 +145,7 @@ extern const struct clk_ops clk_alpha_pll_postdiv_ops;
> > + extern const struct clk_ops clk_alpha_pll_huayra_ops;
> > + extern const struct clk_ops clk_alpha_pll_postdiv_ro_ops;
> > + extern const struct clk_ops clk_alpha_pll_stromer_ops;
> > ++extern const struct clk_ops clk_alpha_pll_stromer_plus_ops;
> > +
> > + extern const struct clk_ops clk_alpha_pll_fabia_ops;
> > + extern const struct clk_ops clk_alpha_pll_fixed_fabia_ops;
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0037-cpufreq-qcom-nvmem-Introduce-cpufreq-for-ipq95xx.patch b/target/linux/ipq95xx/patches-6.1/0037-cpufreq-qcom-nvmem-Introduce-cpufreq-for-ipq95xx.patch
> > new file mode 100644
> > index 0000000000..a178ef4d8a
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0037-cpufreq-qcom-nvmem-Introduce-cpufreq-for-ipq95xx.patch
> > @@ -0,0 +1,74 @@
> > +From 80838ab7ebd416cbac38c1cd30a76d61641f7ee1 Mon Sep 17 00:00:00 2001
> > +From: Varadarajan Narayanan <quic_varada at quicinc.com>
> > +Date: Tue, 31 Oct 2023 12:41:39 +0530
> > +Subject: [PATCH 37/41] cpufreq: qcom-nvmem: Introduce cpufreq for ipq95xx
> > +
> > +IPQ95xx SoCs have different OPPs available for the CPU based on
> > +the SoC variant. This can be determined from an eFuse register
> > +present in the silicon.
> > +
> > +Added support for ipq95xx on nvmem driver which helps to
> > +determine OPPs at runtime based on the eFuse register which
> > +has the CPU frequency limits. opp-supported-hw dt binding
> > +can be used to indicate the available OPPs for each limit.
> > +
> > +Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > +Signed-off-by: Praveenkumar I <ipkumar at codeaurora.org>
> > +Signed-off-by: Kathiravan T <quic_kathirav at quicinc.com>
> > +Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> > +[ Viresh: Fixed subject ]
> > +Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
> > +---
> > + drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
> > + drivers/cpufreq/qcom-cpufreq-nvmem.c | 5 +++++
> > + include/dt-bindings/arm/qcom,ids.h | 6 ++++++
> > + 3 files changed, 12 insertions(+)
> > +
> > +diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> > +index 69a8742c0a7a..3df1d5747ab7 100644
> > +--- a/drivers/cpufreq/cpufreq-dt-platdev.c
> > ++++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> > +@@ -164,6 +164,7 @@ static const struct of_device_id blocklist[] __initconst = {
> > + { .compatible = "ti,omap3", },
> > +
> > + { .compatible = "qcom,ipq8064", },
> > ++ { .compatible = "qcom,ipq9574", },
> > + { .compatible = "qcom,apq8064", },
> > + { .compatible = "qcom,msm8974", },
> > + { .compatible = "qcom,msm8960", },
> > +diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> > +index a88b6fe5db50..902a0557d832 100644
> > +--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
> > ++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> > +@@ -149,6 +149,11 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
> > + switch (msm_id) {
> > + case QCOM_ID_MSM8996:
> > + case QCOM_ID_APQ8096:
> > ++ case QCOM_ID_IPQ9514:
> > ++ case QCOM_ID_IPQ9550:
> > ++ case QCOM_ID_IPQ9554:
> > ++ case QCOM_ID_IPQ9570:
> > ++ case QCOM_ID_IPQ9574:
> > + drv->versions = 1 << (unsigned int)(*speedbin);
> > + break;
> > + case QCOM_ID_MSM8996SG:
> > +diff --git a/include/dt-bindings/arm/qcom,ids.h b/include/dt-bindings/arm/qcom,ids.h
> > +index 755e08d494c5..7e77a7d84e2a 100644
> > +--- a/include/dt-bindings/arm/qcom,ids.h
> > ++++ b/include/dt-bindings/arm/qcom,ids.h
> > +@@ -140,6 +140,12 @@
> > + #define QCOM_ID_SC7280 487
> > + #define QCOM_ID_SC7180P 495
> > + #define QCOM_ID_SM6375 507
> > ++#define QCOM_ID_IPQ9514 510
> > ++#define QCOM_ID_IPQ9550 511
> > ++#define QCOM_ID_IPQ9554 512
> > ++#define QCOM_ID_IPQ9570 513
> > ++#define QCOM_ID_IPQ9574 514
> > ++#define QCOM_ID_IPQ9510 521
> > +
> > + /*
> > + * The board type and revision information, used by Qualcomm bootloaders and
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0038-arm64-dts-qcom-ipq9574-Enable-WPS-buttons.patch b/target/linux/ipq95xx/patches-6.1/0038-arm64-dts-qcom-ipq9574-Enable-WPS-buttons.patch
> > new file mode 100644
> > index 0000000000..6e3c85529c
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0038-arm64-dts-qcom-ipq9574-Enable-WPS-buttons.patch
> > @@ -0,0 +1,66 @@
> > +From ff1925f7070d4cc3c5772565672632854444317e Mon Sep 17 00:00:00 2001
> > +From: Anusha Rao <quic_anusha at quicinc.com>
> > +Date: Wed, 27 Sep 2023 12:13:19 +0530
> > +Subject: [PATCH 38/41] arm64: dts: qcom: ipq9574: Enable WPS buttons
> > +
> > +Add support for wps buttons on GPIO 37.
> > +
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
> > +Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav at quicinc.com>
> > +Link: https://lore.kernel.org/r/20230927-common-rdp-v3-2-3d07b3ff6d42@quicinc.com
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +---
> > + .../boot/dts/qcom/ipq9574-rdp-common.dtsi | 22 +++++++++++++++++++
> > + 1 file changed, 22 insertions(+)
> > +
> > +diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> > +index c935ac53efe6..526f0dbbdbe9 100644
> > +--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> > ++++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> > +@@ -8,6 +8,8 @@
> > +
> > + /dts-v1/;
> > +
> > ++#include <dt-bindings/gpio/gpio.h>
> > ++#include <dt-bindings/input/input.h>
> > + #include "ipq9574.dtsi"
> > +
> > + / {
> > +@@ -36,6 +38,19 @@ regulator_fixed_0p925: s0925 {
> > + regulator-always-on;
> > + regulator-name = "fixed_0p925";
> > + };
> > ++
> > ++ gpio-keys {
> > ++ compatible = "gpio-keys";
> > ++ pinctrl-0 = <&gpio_keys_default>;
> > ++ pinctrl-names = "default";
> > ++
> > ++ button-wps {
> > ++ label = "wps";
> > ++ linux,code = <KEY_WPS_BUTTON>;
> > ++ gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
> > ++ debounce-interval = <60>;
> > ++ };
> > ++ };
> > + };
> > +
> > + &blsp1_spi0 {
> > +@@ -95,6 +110,13 @@ spi_0_pins: spi-0-state {
> > + drive-strength = <8>;
> > + bias-disable;
> > + };
> > ++
> > ++ gpio_keys_default: gpio-keys-default-state {
> > ++ pins = "gpio37";
> > ++ function = "gpio";
> > ++ drive-strength = <8>;
> > ++ bias-pull-up;
> > ++ };
> > + };
> > +
> > + &xo_board_clk {
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0039-clk-qcom-apss-ipq-pll-add-support-for-IPQ5332.patch b/target/linux/ipq95xx/patches-6.1/0039-clk-qcom-apss-ipq-pll-add-support-for-IPQ5332.patch
> > new file mode 100644
> > index 0000000000..57c572dea3
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0039-clk-qcom-apss-ipq-pll-add-support-for-IPQ5332.patch
> > @@ -0,0 +1,131 @@
> > +From 7b20271bc8c2982ab1e7bcfcf896ca5320b16a6f Mon Sep 17 00:00:00 2001
> > +From: Kathiravan T <quic_kathirav at quicinc.com>
> > +Date: Fri, 17 Feb 2023 14:03:06 +0530
> > +Subject: [PATCH 39/41] clk: qcom: apss-ipq-pll: add support for IPQ5332
> > +
> > +IPQ5332 APSS PLL is of type Stromer Plus. Add support for the same.
> > +
> > +To configure the stromer plus PLL separate API
> > +(clock_stromer_pll_configure) to be used. To achieve this, introduce the
> > +new member pll_type in device data structure and call the appropriate
> > +function based on this.
> > +
> > +Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
> > +Signed-off-by: Kathiravan T <quic_kathirav at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230217083308.12017-4-quic_kathirav@quicinc.com
> > +---
> > + drivers/clk/qcom/apss-ipq-pll.c | 59 ++++++++++++++++++++++++++++++++-
> > + 1 file changed, 58 insertions(+), 1 deletion(-)
> > +
> > +diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
> > +index 56f33af11311..4ec347f0e8b1 100644
> > +--- a/drivers/clk/qcom/apss-ipq-pll.c
> > ++++ b/drivers/clk/qcom/apss-ipq-pll.c
> > +@@ -24,6 +24,18 @@ static const u8 ipq_pll_offsets[][PLL_OFF_MAX_REGS] = {
> > + [PLL_OFF_TEST_CTL] = 0x30,
> > + [PLL_OFF_TEST_CTL_U] = 0x34,
> > + },
> > ++
> > ++ [CLK_ALPHA_PLL_TYPE_STROMER_PLUS] = {
> > ++ [PLL_OFF_L_VAL] = 0x08,
> > ++ [PLL_OFF_ALPHA_VAL] = 0x10,
> > ++ [PLL_OFF_ALPHA_VAL_U] = 0x14,
> > ++ [PLL_OFF_USER_CTL] = 0x18,
> > ++ [PLL_OFF_USER_CTL_U] = 0x1c,
> > ++ [PLL_OFF_CONFIG_CTL] = 0x20,
> > ++ [PLL_OFF_STATUS] = 0x28,
> > ++ [PLL_OFF_TEST_CTL] = 0x30,
> > ++ [PLL_OFF_TEST_CTL_U] = 0x34,
> > ++ },
> > + };
> > +
> > + static struct clk_alpha_pll ipq_pll_huayra = {
> > +@@ -44,6 +56,38 @@ static struct clk_alpha_pll ipq_pll_huayra = {
> > + },
> > + };
> > +
> > ++static struct clk_alpha_pll ipq_pll_stromer_plus = {
> > ++ .offset = 0x0,
> > ++ .regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_STROMER_PLUS],
> > ++ .flags = SUPPORTS_DYNAMIC_UPDATE,
> > ++ .clkr = {
> > ++ .enable_reg = 0x0,
> > ++ .enable_mask = BIT(0),
> > ++ .hw.init = &(struct clk_init_data){
> > ++ .name = "a53pll",
> > ++ .parent_data = &(const struct clk_parent_data) {
> > ++ .fw_name = "xo",
> > ++ },
> > ++ .num_parents = 1,
> > ++ .ops = &clk_alpha_pll_stromer_ops,
> > ++ },
> > ++ },
> > ++};
> > ++
> > ++static const struct alpha_pll_config ipq5332_pll_config = {
> > ++ .l = 0x3e,
> > ++ .config_ctl_val = 0x4001075b,
> > ++ .config_ctl_hi_val = 0x304,
> > ++ .main_output_mask = BIT(0),
> > ++ .aux_output_mask = BIT(1),
> > ++ .early_output_mask = BIT(3),
> > ++ .alpha_en_mask = BIT(24),
> > ++ .status_val = 0x3,
> > ++ .status_mask = GENMASK(10, 8),
> > ++ .lock_det = BIT(2),
> > ++ .test_ctl_hi_val = 0x00400003,
> > ++};
> > ++
> > + static const struct alpha_pll_config ipq6018_pll_config = {
> > + .l = 0x37,
> > + .config_ctl_val = 0x240d4828,
> > +@@ -81,16 +125,25 @@ static const struct alpha_pll_config ipq9574_pll_config = {
> > + };
> > +
> > + struct apss_pll_data {
> > ++ int pll_type;
> > + struct clk_alpha_pll *pll;
> > + const struct alpha_pll_config *pll_config;
> > + };
> > +
> > ++static struct apss_pll_data ipq5332_pll_data = {
> > ++ .pll_type = CLK_ALPHA_PLL_TYPE_STROMER_PLUS,
> > ++ .pll = &ipq_pll_stromer_plus,
> > ++ .pll_config = &ipq5332_pll_config,
> > ++};
> > ++
> > + static struct apss_pll_data ipq8074_pll_data = {
> > ++ .pll_type = CLK_ALPHA_PLL_TYPE_HUAYRA,
> > + .pll = &ipq_pll_huayra,
> > + .pll_config = &ipq8074_pll_config,
> > + };
> > +
> > + static struct apss_pll_data ipq6018_pll_data = {
> > ++ .pll_type = CLK_ALPHA_PLL_TYPE_HUAYRA,
> > + .pll = &ipq_pll_huayra,
> > + .pll_config = &ipq6018_pll_config,
> > + };
> > +@@ -129,7 +182,10 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
> > + if (!data)
> > + return -ENODEV;
> > +
> > +- clk_alpha_pll_configure(data->pll, regmap, data->pll_config);
> > ++ if (data->pll_type == CLK_ALPHA_PLL_TYPE_HUAYRA)
> > ++ clk_alpha_pll_configure(data->pll, regmap, data->pll_config);
> > ++ else if (data->pll_type == CLK_ALPHA_PLL_TYPE_STROMER_PLUS)
> > ++ clk_stromer_pll_configure(data->pll, regmap, data->pll_config);
> > +
> > + ret = devm_clk_register_regmap(dev, &data->pll->clkr);
> > + if (ret)
> > +@@ -140,6 +196,7 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
> > + }
> > +
> > + static const struct of_device_id apss_ipq_pll_match_table[] = {
> > ++ { .compatible = "qcom,ipq5332-a53pll", .data = &ipq5332_pll_data },
> > + { .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_data },
> > + { .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_data },
> > + { .compatible = "qcom,ipq9574-a73pll", .data = &ipq9574_pll_data },
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0040-clk-qcom-apss-ipq-pll-Use-stromer-plus-ops-for-strom.patch b/target/linux/ipq95xx/patches-6.1/0040-clk-qcom-apss-ipq-pll-Use-stromer-plus-ops-for-strom.patch
> > new file mode 100644
> > index 0000000000..7efaad2da4
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0040-clk-qcom-apss-ipq-pll-Use-stromer-plus-ops-for-strom.patch
> > @@ -0,0 +1,39 @@
> > +From 998d251c67072059c80a5747d19e8c34a154a213 Mon Sep 17 00:00:00 2001
> > +From: Varadarajan Narayanan <quic_varada at quicinc.com>
> > +Date: Fri, 20 Oct 2023 11:49:33 +0530
> > +Subject: [PATCH 40/41] clk: qcom: apss-ipq-pll: Use stromer plus ops for
> > + stromer plus pll
> > +
> > +The set rate and determine rate operations are different between
> > +Stromer and Stromer Plus PLLs. Since the programming sequence is
> > +different, the PLLs dont get configured properly and random,
> > +inexplicable crash/freeze is seen. Hence, use stromer plus ops
> > +for ipq_pll_stromer_plus.
> > +
> > +Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > +Acked-by: Stephen Boyd <sboyd at kernel.org>
> > +Fixes: c7ef7fbb1ccf ("clk: qcom: apss-ipq-pll: add support for IPQ5332")
> > +Signed-off-by: Kathiravan T <quic_kathirav at quicinc.com>
> > +Signed-off-by: Varadarajan Narayanan <quic_varada at quicinc.com>
> > +Link: https://lore.kernel.org/r/c86ecaa23dc4f39650bcf4a3bd54a617a932e4fd.1697781921.git.quic_varada@quicinc.com
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +---
> > + drivers/clk/qcom/apss-ipq-pll.c | 2 +-
> > + 1 file changed, 1 insertion(+), 1 deletion(-)
> > +
> > +diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
> > +index 4ec347f0e8b1..87547db3bfb3 100644
> > +--- a/drivers/clk/qcom/apss-ipq-pll.c
> > ++++ b/drivers/clk/qcom/apss-ipq-pll.c
> > +@@ -69,7 +69,7 @@ static struct clk_alpha_pll ipq_pll_stromer_plus = {
> > + .fw_name = "xo",
> > + },
> > + .num_parents = 1,
> > +- .ops = &clk_alpha_pll_stromer_ops,
> > ++ .ops = &clk_alpha_pll_stromer_plus_ops,
> > + },
> > + },
> > + };
> > +--
> > +2.34.1
> > +
> > diff --git a/target/linux/ipq95xx/patches-6.1/0041-clk-qcom-Add-STROMER-PLUS-PLL-type-for-IPQ5332.patch b/target/linux/ipq95xx/patches-6.1/0041-clk-qcom-Add-STROMER-PLUS-PLL-type-for-IPQ5332.patch
> > new file mode 100644
> > index 0000000000..65b2de6195
> > --- /dev/null
> > +++ b/target/linux/ipq95xx/patches-6.1/0041-clk-qcom-Add-STROMER-PLUS-PLL-type-for-IPQ5332.patch
> > @@ -0,0 +1,55 @@
> > +From d10112948b0ff58b749f6f89a963185a190ce885 Mon Sep 17 00:00:00 2001
> > +From: Kathiravan T <quic_kathirav at quicinc.com>
> > +Date: Tue, 7 Mar 2023 11:52:25 +0530
> > +Subject: [PATCH 41/41] clk: qcom: Add STROMER PLUS PLL type for IPQ5332
> > +
> > +Add the support for stromer plus pll, which is found on the IPQ5332
> > +SoCs. Programming sequence is same as the stromer pll, so we can re-use
> > +the same.
> > +
> > +Reviewed-by: Stephen Boyd <sboyd at kernel.org>
> > +Signed-off-by: Kathiravan T <quic_kathirav at quicinc.com>
> > +Signed-off-by: Bjorn Andersson <andersson at kernel.org>
> > +Link: https://lore.kernel.org/r/20230307062232.4889-3-quic_kathirav@quicinc.com
> > +---
> > + drivers/clk/qcom/clk-alpha-pll.c | 11 +++++++++++
> > + drivers/clk/qcom/clk-alpha-pll.h | 1 +
> > + 2 files changed, 12 insertions(+)
> > +
> > +diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> > +index 56f1795847cd..b3d1a39c835b 100644
> > +--- a/drivers/clk/qcom/clk-alpha-pll.c
> > ++++ b/drivers/clk/qcom/clk-alpha-pll.c
> > +@@ -200,6 +200,17 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
> > + [PLL_OFF_TEST_CTL_U] = 0x34,
> > + [PLL_OFF_STATUS] = 0x28,
> > + },
> > ++ [CLK_ALPHA_PLL_TYPE_STROMER_PLUS] = {
> > ++ [PLL_OFF_L_VAL] = 0x04,
> > ++ [PLL_OFF_USER_CTL] = 0x08,
> > ++ [PLL_OFF_USER_CTL_U] = 0x0c,
> > ++ [PLL_OFF_CONFIG_CTL] = 0x10,
> > ++ [PLL_OFF_TEST_CTL] = 0x14,
> > ++ [PLL_OFF_TEST_CTL_U] = 0x18,
> > ++ [PLL_OFF_STATUS] = 0x1c,
> > ++ [PLL_OFF_ALPHA_VAL] = 0x24,
> > ++ [PLL_OFF_ALPHA_VAL_U] = 0x28,
> > ++ },
> > + };
> > + EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
> > +
> > +diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
> > +index eb072ae7861c..42d2a93a28ba 100644
> > +--- a/drivers/clk/qcom/clk-alpha-pll.h
> > ++++ b/drivers/clk/qcom/clk-alpha-pll.h
> > +@@ -26,6 +26,7 @@ enum {
> > + CLK_ALPHA_PLL_TYPE_DEFAULT_EVO,
> > + CLK_ALPHA_PLL_TYPE_BRAMMO_EVO,
> > + CLK_ALPHA_PLL_TYPE_STROMER,
> > ++ CLK_ALPHA_PLL_TYPE_STROMER_PLUS,
> > + CLK_ALPHA_PLL_TYPE_MAX,
> > + };
> > +
> > +--
> > +2.34.1
> > +
More information about the openwrt-devel
mailing list