[PATCH v1 6/6] ath79: D-Link DAP-3662 A1: convert ath10k caldata to nvmem
Sander Vanheule
sander at svanheule.net
Sat Jun 11 04:48:55 PDT 2022
Add the PCIe node for the ath10k radio to the devicetree, and refer to
the art partition for the calibration data using nvmem-cells.
MAC address assignment is moved to '10_fix_wifi_mac', so the device can
then be removed from the caldata extraction script '11-ath10k-caldata'.
Cc: Sebastian Schaper <openwrt at sebastianschaper.net>
Signed-off-by: Sander Vanheule <sander at svanheule.net>
---
.../linux/ath79/dts/qca9558_dlink_dap-3662-a1.dts | 14 ++++++++++++++
.../etc/hotplug.d/firmware/11-ath10k-caldata | 4 ----
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 7 ++-----
3 files changed, 16 insertions(+), 9 deletions(-)
diff --git a/target/linux/ath79/dts/qca9558_dlink_dap-3662-a1.dts b/target/linux/ath79/dts/qca9558_dlink_dap-3662-a1.dts
index 1ecc987a4f2c..27883f721cf5 100644
--- a/target/linux/ath79/dts/qca9558_dlink_dap-3662-a1.dts
+++ b/target/linux/ath79/dts/qca9558_dlink_dap-3662-a1.dts
@@ -93,4 +93,18 @@
&pcie0 {
status = "okay";
+
+ wifi at 0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+
+ nvmem-cells = <&cal_ath10k>;
+ nvmem-cell-names = "calibration";
+ };
+};
+
+&art {
+ cal_ath10k: calibration at 5000 {
+ reg = <0x5000 0x844>;
+ };
};
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 2223b8f33a95..55604c7562f2 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -67,10 +67,6 @@ case "$FIRMWARE" in
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
;;
- dlink,dap-3662-a1)
- caldata_extract "art" 0x5000 0x844
- ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
- ;;
dlink,dir-859-a1)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index fc74d3dd4a00..95ff6083c7f8 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -26,13 +26,10 @@ case "$board" in
dlink,dap-3320-a1)
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
;;
- dlink,dap-3662-a1)
- [ "$PHYNBR" -eq 1 ] && \
- mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
- ;;
dlink,dap-2660-a1|\
dlink,dap-2680-a1|\
- dlink,dap-2695-a1)
+ dlink,dap-2695-a1|\
+ dlink,dap-3662-a1)
[ "$PHYNBR" -eq 0 ] && \
mtd_get_mac_ascii bdcfg "wlanmac_a" > /sys${DEVPATH}/macaddress
[ "$PHYNBR" -eq 1 ] && \
--
2.36.1
More information about the openwrt-devel
mailing list