[PATCH V2] tplink-safeloader: Add support for Mercusys MR70X

[Sander Vanheule]

Hi Yoonji,

On Sat, 2022-06-04 at 10:50 +0000, Yoonji Park wrote:
> Add support for Mercusys MR70X image creation.
> 
> Software version:
> soft_ver:1.0.3 Build 20201222 Rel. 50381
> 
> Partition table:
> 00000000 00040000 fs-uboot
> 00040000 00400000 os-image
> 00440000 00b60000 file-system
> 00fa0000 00000200 default-mac
> 00fa0200 00000100 pin
> 00fa0300 00000100 device-id
> 00fa0400 0000fc00 product-info
> 00fb0000 00008000 default-config
> 00fb8000 00008000 ap-def-config
> 00fc0000 0000c000 user-config
> 00fcc000 00004000 certificate
> 00fd0000 00008000 ap-config
> 00fd8000 00008000 router-config
> 00fe0000 00000800 partition-table
> 00fe0800 00000100 soft-version
> 00fe0900 00000200 support-list
> 00fe0b00 00003000 profile
> 00fe3b00 00000100 extra-para
> 00ff0000 00010000 radio
> 
> os-image and file-system is merged for dynamic split.
> 
> Signed-off-by: Yoonji Park <koreapyj at dcmys.kr>

Thanks for the quick update. I merged the patch with one minor change; see below.

Best,
Sander

> ---
>  src/tplink-safeloader.c | 42 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
> index 6f1ad2c..c686aa0 100644
> --- a/src/tplink-safeloader.c
> +++ b/src/tplink-safeloader.c
> @@ -2916,6 +2916,47 @@ static struct device_info boards[] = {
>                 .last_sysupgrade_partition = "file-system"
>         },
>  
> +       /** Firmware layout for the Mercusys MR70X */
> +       {
> +               .id     = "MR70X",
> +               .vendor = "",
> +               .support_list =
> +                       "SupportList:\n"
> +                       "{product_name:MR70X,product_ver:1.0.0,special_id:45550000}\n"
> +                       "{product_name:MR70X,product_ver:1.0.0,special_id:4A500000}\n"
> +                       "{product_name:MR70X,product_ver:1.0.0,special_id:55530000}\n",
> +               .part_trail = 0x00,
> +               .soft_ver = SOFT_VER_DEFAULT,
> +
> +               .partitions = {
> +                       {"fs-uboot", 0x00000, 0x40000},
> +                       {"firmware", 0x40000, 0xf60000},
> +                       {"default-mac", 0xfa0000, 0x00200},
> +                       {"pin", 0xfa0200, 0x00100},
> +                       {"device-id", 0xfa0300, 0x00100},
> +                       {"product-info", 0xfa0400, 0x0fc00},
> +                       {"default-config", 0xfb0000, 0x08000},
> +                       {"ap-def-config", 0xfb8000, 0x08000},
> +                       {"user-config", 0xfc0000, 0x0a000},
> +                       {"ag-config", 0xfca000, 0x04000},
> +                       {"certificate", 0xfce000, 0x02000},
> +                       {"ap-config", 0xfd0000, 0x06000},
> +                       {"router-config", 0xfd6000, 0x06000},
> +                       {"favicon", 0xfdc000, 0x02000},
> +                       {"logo", 0xfde000, 0x02000},
> +                       {"partition-table", 0xfe0000, 0x00800},
> +                       {"soft-version", 0xfe0800, 0x00100},
> +                       {"support-list", 0xfe0900, 0x00200},
> +                       {"profile", 0xfe0b00, 0x03000},
> +                       {"extra-para", 0xfe3b00, 0x00100},
> +                       {"radio", 0xff0000, 0x10000},
> +                       {NULL, 0, 0}
> +               },
> +
> +               .first_sysupgrade_partition = "os-image",
> +               .last_sysupgrade_partition = "file-system"
> +       },
> +
>  

I've dropped the added newline, so there's only one empty line between this block and the end-of-
list sentinel.

>         {}
>  };