[PATCH] realtek: fix RTL8231 gpio expander for high GPIOs

[Paul Fertser]

GPIOs > 31 require special handling. This patch fixes both the
initialisation (defaulting to input) and direction get/set operations.

Runtime-tested on D-Link DGS-1210-10P-R1 which has "reset" button on
GPIO[33].

Signed-off-by: Paul Fertser <fercerpav at gmail.com>
---
 .../realtek/files-5.4/drivers/gpio/gpio-rtl8231.c      | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl8231.c b/target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl8231.c
index 031f60f5307c..ddb8894663ec 100644
--- a/target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl8231.c
+++ b/target/linux/realtek/files-5.4/drivers/gpio/gpio-rtl8231.c
@@ -106,12 +106,11 @@ static int rtl8231_pin_dir(struct rtl8231_gpios *gpios, u32 gpio, u32 dir)
 	u32 v;
 	int pin_sel_addr = RTL8231_GPIO_PIN_SEL(gpio);
 	int pin_dir_addr = RTL8231_GPIO_DIR(gpio);
-	int pin = gpio % 16;
-	int dpin = pin;
+	int dpin = gpio % 16;
 
 	if (gpio > 31) {
 		pr_debug("WARNING: HIGH pin\n");
-		dpin = pin << 5;
+		dpin += 5;
 		pin_dir_addr = pin_sel_addr;
 	}
 
@@ -140,7 +139,7 @@ static int rtl8231_pin_dir_get(struct rtl8231_gpios *gpios, u32 gpio, u32 *dir)
 
 	if (gpio > 31) {
 		pin_dir_addr = RTL8231_GPIO_PIN_SEL(gpio);
-		pin = pin << 5;
+		pin += 5;
 	}
 
 	v = rtl8231_read(gpios, pin_dir_addr);
@@ -253,9 +252,10 @@ int rtl8231_init(struct rtl8231_gpios *gpios)
 		sw_w32_mask(3, 1, RTL838X_DMY_REG5);
 	}
 
-	/*Select GPIO functionality for pins 0-15, 16-31 and 32-37 */
+	/*Select GPIO functionality for pins 0-15, 16-31 and 32-34 */
 	rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(0), 0xffff);
 	rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(16), 0xffff);
+	rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(32), 7 | (7 << 5));
 
 	return 0;
 }
-- 
2.17.1