[PATCH] iw: sync nl80211 with kernel backports
Hauke Mehrtens
hauke at hauke-m.de
Tue Oct 19 13:26:11 PDT 2021
The nl80211 was out of sync with the version used in our backports. This
broke the configuration of the antenna gain.
Fixes: 2bfac61483db ("mac80211: backport support for BSS color changes")
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
.../utils/iw/patches/001-nl80211_h_sync.patch | 69 +++++++++++++++----
1 file changed, 56 insertions(+), 13 deletions(-)
diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
index 1d6ea0fae0f3..2f724b61ff77 100644
--- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch
+++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
@@ -20,27 +20,50 @@
*
* @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
* multicast to unicast conversion. When enabled, all multicast packets
-@@ -1177,6 +1181,10 @@
+@@ -1177,6 +1181,25 @@
* includes the contents of the frame. %NL80211_ATTR_ACK flag is included
* if the recipient acknowledged the frame.
*
+ * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
+ * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
+ * specify the wiphy index to be applied to.
++ *
++ * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever
++ * mac80211/drv detects a bss color collision.
++ *
++ * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that
++ * userspace wants to change the BSS color.
++ *
++ * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has
++ * started
++ *
++ * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has
++ * been aborted
++ *
++ * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change
++ * has completed
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
-@@ -1407,6 +1415,8 @@ enum nl80211_commands {
+@@ -1407,6 +1430,16 @@ enum nl80211_commands {
NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
+ NL80211_CMD_SET_SAR_SPECS,
++
++ NL80211_CMD_OBSS_COLOR_COLLISION,
++
++ NL80211_CMD_COLOR_CHANGE_REQUEST,
++
++ NL80211_CMD_COLOR_CHANGE_STARTED,
++ NL80211_CMD_COLOR_CHANGE_ABORTED,
++ NL80211_CMD_COLOR_CHANGE_COMPLETED,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
-@@ -1750,8 +1760,9 @@ enum nl80211_commands {
+@@ -1750,8 +1783,9 @@ enum nl80211_commands {
* specify just a single bitrate, which is to be used for the beacon.
* The driver must also specify support for this with the extended
* features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
@@ -52,7 +75,7 @@
*
* @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
* at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
-@@ -1955,8 +1966,15 @@ enum nl80211_commands {
+@@ -1955,8 +1989,15 @@ enum nl80211_commands {
* @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
* probe-response frame. The DA field in the 802.11 header is zero-ed out,
* to be filled by the FW.
@@ -70,7 +93,7 @@
* @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
* ATTR_HT_CAPABILITY to which attention should be paid.
* Currently, only mac80211 NICs support this feature.
-@@ -2077,7 +2095,8 @@ enum nl80211_commands {
+@@ -2077,7 +2118,8 @@ enum nl80211_commands {
* until the channel switch event.
* @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
* must be blocked on the current channel (before the channel switch
@@ -80,7 +103,7 @@
* @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
* for the time while performing a channel switch.
* @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
-@@ -2527,6 +2546,23 @@ enum nl80211_commands {
+@@ -2527,6 +2569,33 @@ enum nl80211_commands {
* override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
* NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
*
@@ -98,13 +121,23 @@
+ * disassoc events to indicate that an immediate reconnect to the AP
+ * is desired.
+ *
++ * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the
++ * %NL80211_CMD_OBSS_COLOR_COLLISION event.
++ *
++ * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's
++ * until the color switch event.
++ * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are
++ * switching to
++ * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE
++ * information for the time while performing a color switch.
++ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -3016,6 +3052,16 @@ enum nl80211_attrs {
+@@ -3016,6 +3085,22 @@ enum nl80211_attrs {
NL80211_ATTR_S1G_CAPABILITY,
NL80211_ATTR_S1G_CAPABILITY_MASK,
@@ -116,12 +149,18 @@
+
+ NL80211_ATTR_DISABLE_HE,
+
++ NL80211_ATTR_OBSS_COLOR_BITMAP,
++
++ NL80211_ATTR_COLOR_CHANGE_COUNT,
++ NL80211_ATTR_COLOR_CHANGE_COLOR,
++ NL80211_ATTR_COLOR_CHANGE_ELEMS,
++
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -5896,6 +5942,19 @@ enum nl80211_feature_flags {
+@@ -5896,6 +5981,22 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
* unsolicited broadcast probe response transmission
*
@@ -137,11 +176,14 @@
+ * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
+ * frame protection for all management frames exchanged during the
+ * negotiation and range measurement procedure.
++ *
++ * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision
++ * detection and change announcemnts.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
-@@ -5956,6 +6015,10 @@ enum nl80211_ext_feature_index {
+@@ -5956,6 +6057,11 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
NL80211_EXT_FEATURE_FILS_DISCOVERY,
NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
@@ -149,10 +191,11 @@
+ NL80211_EXT_FEATURE_SECURE_LTF,
+ NL80211_EXT_FEATURE_SECURE_RTT,
+ NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
++ NL80211_EXT_FEATURE_BSS_COLOR,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
-@@ -6253,11 +6316,13 @@ struct nl80211_vendor_cmd_info {
+@@ -6253,11 +6359,13 @@ struct nl80211_vendor_cmd_info {
* @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
* @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
* @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
@@ -166,7 +209,7 @@
};
/**
-@@ -6849,6 +6914,9 @@ enum nl80211_peer_measurement_ftm_capa {
+@@ -6849,6 +6957,9 @@ enum nl80211_peer_measurement_ftm_capa {
* if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
* %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
* ranging will be used.
@@ -176,7 +219,7 @@
*
* @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
* @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
-@@ -6867,6 +6935,7 @@ enum nl80211_peer_measurement_ftm_req {
+@@ -6867,6 +6978,7 @@ enum nl80211_peer_measurement_ftm_req {
NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
@@ -184,7 +227,7 @@
/* keep last */
NUM_NL80211_PMSR_FTM_REQ_ATTR,
-@@ -7124,4 +7193,115 @@ enum nl80211_unsol_bcast_probe_resp_attr
+@@ -7124,4 +7236,115 @@ enum nl80211_unsol_bcast_probe_resp_attr
NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
};
--
2.30.2
More information about the openwrt-devel
mailing list