[PATCH] mvebu: remove Linux 5.4 support
Rui Salvaterra
rsalvaterra at gmail.com
Sat Oct 2 03:26:42 PDT 2021
We don't need it anymore, as 5.10 has been promoted to stable.
Signed-off-by: Rui Salvaterra <rsalvaterra at gmail.com>
---
target/linux/mvebu/config-5.4 | 421 ------
target/linux/mvebu/cortexa53/config-5.4 | 92 --
target/linux/mvebu/cortexa72/config-5.4 | 99 --
.../marvell/armada-3720-espressobin-emmc.dts | 28 -
.../armada-3720-espressobin-v7-emmc.dts | 43 -
.../marvell/armada-3720-espressobin-v7.dts | 31 -
...l-Add-support-for-Marvell-CN9130-SoC.patch | 55 -
...t-for-endpoint-to-be-ready-before-tr.patch | 50 -
...64-dts-marvell-Add-support-for-CP115.patch | 30 -
...ll-Prepare-the-introduction-of-CP115.patch | 1318 -----------------
...ntroduce-mvneta_update_stats-routine.patch | 95 --
...ell-Add-support-for-AP807-AP807-quad.patch | 102 --
...duce-page-pool-API-for-sw-buffer-man.patch | 181 ---
...ell-Add-AP807-quad-cache-description.patch | 87 --
...on-build_skb-in-mvneta_rx_swbm-poll-.patch | 303 ----
...l-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch | 135 --
...006-net-mvneta-add-basic-XDP-support.patch | 311 ----
...l-Externalize-PCIe-macros-from-CP11x.patch | 129 --
...avoid_error_message_for_optional_IRQ.patch | 31 -
...header-prefetch-in-mvneta_swbm_rx_fr.patch | 43 -
...ell-Enumerate-the-first-AP806-syscon.patch | 25 -
...mvneta-make-tx-buffer-array-agnostic.patch | 210 ---
...l-Prepare-the-introduction-of-AP807-.patch | 937 ------------
.../009-net-mvneta-add-XDP_TX-support.patch | 175 ---
...l-Move-clocks-to-AP806-specific-file.patch | 65 -
...fix-build-skb-for-bm-capable-devices.patch | 41 -
...-arm64-dts-uDPU-remove-i2c-fast-mode.patch | 31 -
...ts-uDPU-SFP-cages-support-3W-modules.patch | 34 -
...on-page_pool_recycle_direct-in-mvnet.patch | 39 -
...sallow-XDP-program-on-hardware-buffe.patch | 53 -
...DP-support-if-sw-bm-is-used-as-fallb.patch | 67 -
...in-link-immediately-after-enabling-t.patch | 60 -
...7-PCI-aardvark-Improve-link-training.patch | 208 ---
...18-PCI-aardvark-Issue-PERST-via-GPIO.patch | 123 --
.../019-PCI-aardvark-Add-PHY-support.patch | 152 --
...l-armada-37xx-Set-pcie_reset_pin-to-.patch | 93 --
...l-armada-37xx-Move-PCIe-comphy-handl.patch | 57 -
...l-armada-37xx-Move-PCIe-max-link-spe.patch | 44 -
...-arm64-dts-add-uDPU-i2c-bus-recovery.patch | 53 -
...-t-touch-PCIe-registers-if-no-card-c.patch | 50 -
...add-driver-for-LinkStation-power-off.patch | 207 ---
...-initialization-with-old-Marvell-s-A.patch | 44 -
...l-espressobin-Add-ethernet-switch-al.patch | 88 --
...s-mcbin-singleshot-add-heartbeat-LED.patch | 65 -
...is-omnia-enable-HW-buffer-management.patch | 74 -
...rris-omnia-add-comphy-handle-to-eth2.patch | 37 -
...rris-omnia-describe-switch-interrupt.patch | 61 -
...32-ARM-dts-turris-omnia-add-SFP-node.patch | 90 --
...te-ethernet-phy-node-and-handle-name.patch | 52 -
...omnia-fix-hardware-buffer-management.patch | 33 -
...Mangle-bootloader-s-kernel-arguments.patch | 208 ---
...-mvebu-armada-38x-enable-libata-leds.patch | 10 -
.../patches-5.4/302-add_powertables.patch | 770 ----------
...3-linksys_hardcode_nand_ecc_settings.patch | 17 -
.../patches-5.4/304-revert_i2c_delay.patch | 15 -
.../305-armada-385-rd-mtd-partitions.patch | 19 -
.../306-ARM-mvebu-385-ap-Add-partitions.patch | 35 -
...-armada-xp-linksys-mamba-broken-idle.patch | 10 -
.../308-armada-xp-linksys-mamba-wan.patch | 11 -
.../patches-5.4/309-linksys-status-led.patch | 50 -
.../310-linksys-use-eth0-as-cpu-port.patch | 25 -
.../311-adjust-compatible-for-linksys.patch | 68 -
...da388-clearfog-emmc-on-clearfog-base.patch | 87 --
.../312-helios4-dts-status-led-alias.patch | 25 -
...ts-marvell-armada37xx-Add-eth0-alias.patch | 20 -
...l-armada-3720-espressobin-add-ports-.patch | 26 -
...witch-PHY-operation-mode-to-2500base.patch | 34 -
...rmada-xp-linksys-mamba-resize-kernel.patch | 37 -
...320-armada-370-dts-fix-crypto-engine.patch | 29 -
.../patches-5.4/400-find_active_root.patch | 60 -
.../700-mvneta-tx-queue-workaround.patch | 38 -
...dicate-failure-to-enter-deeper-sleep.patch | 40 -
...-pci-mvebu-time-out-reset-on-link-up.patch | 60 -
73 files changed, 8546 deletions(-)
delete mode 100644 target/linux/mvebu/config-5.4
delete mode 100644 target/linux/mvebu/cortexa53/config-5.4
delete mode 100644 target/linux/mvebu/cortexa72/config-5.4
delete mode 100644 target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
delete mode 100644 target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
delete mode 100644 target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
delete mode 100644 target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch
delete mode 100644 target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch
delete mode 100644 target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-support-for-CP115.patch
delete mode 100644 target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch
delete mode 100644 target/linux/mvebu/patches-5.4/003-net-mvneta-introduce-mvneta_update_stats-routine.patch
delete mode 100644 target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch
delete mode 100644 target/linux/mvebu/patches-5.4/004-net-mvneta-introduce-page-pool-API-for-sw-buffer-man.patch
delete mode 100644 target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch
delete mode 100644 target/linux/mvebu/patches-5.4/005-net-mvneta-rely-on-build_skb-in-mvneta_rx_swbm-poll-.patch
delete mode 100644 target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch
delete mode 100644 target/linux/mvebu/patches-5.4/006-net-mvneta-add-basic-XDP-support.patch
delete mode 100644 target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch
delete mode 100644 target/linux/mvebu/patches-5.4/007-gpio-mvebu-avoid_error_message_for_optional_IRQ.patch
delete mode 100644 target/linux/mvebu/patches-5.4/007-net-mvneta-move-header-prefetch-in-mvneta_swbm_rx_fr.patch
delete mode 100644 target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch
delete mode 100644 target/linux/mvebu/patches-5.4/008-net-mvneta-make-tx-buffer-array-agnostic.patch
delete mode 100644 target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch
delete mode 100644 target/linux/mvebu/patches-5.4/009-net-mvneta-add-XDP_TX-support.patch
delete mode 100644 target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch
delete mode 100644 target/linux/mvebu/patches-5.4/010-net-mvneta-fix-build-skb-for-bm-capable-devices.patch
delete mode 100644 target/linux/mvebu/patches-5.4/011-arm64-dts-uDPU-remove-i2c-fast-mode.patch
delete mode 100644 target/linux/mvebu/patches-5.4/012-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch
delete mode 100644 target/linux/mvebu/patches-5.4/013-net-mvneta-rely-on-page_pool_recycle_direct-in-mvnet.patch
delete mode 100644 target/linux/mvebu/patches-5.4/014-mvneta-driver-disallow-XDP-program-on-hardware-buffe.patch
delete mode 100644 target/linux/mvebu/patches-5.4/015-net-mvneta-fix-XDP-support-if-sw-bm-is-used-as-fallb.patch
delete mode 100644 target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch
delete mode 100644 target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch
delete mode 100644 target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch
delete mode 100644 target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch
delete mode 100644 target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch
delete mode 100644 target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch
delete mode 100644 target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch
delete mode 100644 target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch
delete mode 100644 target/linux/mvebu/patches-5.4/024-PCI-aardvark-Don-t-touch-PCIe-registers-if-no-card-c.patch
delete mode 100644 target/linux/mvebu/patches-5.4/025-power-reset-add-driver-for-LinkStation-power-off.patch
delete mode 100644 target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch
delete mode 100644 target/linux/mvebu/patches-5.4/027-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch
delete mode 100644 target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
delete mode 100644 target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-enable-HW-buffer-management.patch
delete mode 100644 target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch
delete mode 100644 target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-describe-switch-interrupt.patch
delete mode 100644 target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-SFP-node.patch
delete mode 100644 target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch
delete mode 100644 target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch
delete mode 100644 target/linux/mvebu/patches-5.4/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch
delete mode 100644 target/linux/mvebu/patches-5.4/301-mvebu-armada-38x-enable-libata-leds.patch
delete mode 100644 target/linux/mvebu/patches-5.4/302-add_powertables.patch
delete mode 100644 target/linux/mvebu/patches-5.4/303-linksys_hardcode_nand_ecc_settings.patch
delete mode 100644 target/linux/mvebu/patches-5.4/304-revert_i2c_delay.patch
delete mode 100644 target/linux/mvebu/patches-5.4/305-armada-385-rd-mtd-partitions.patch
delete mode 100644 target/linux/mvebu/patches-5.4/306-ARM-mvebu-385-ap-Add-partitions.patch
delete mode 100644 target/linux/mvebu/patches-5.4/307-armada-xp-linksys-mamba-broken-idle.patch
delete mode 100644 target/linux/mvebu/patches-5.4/308-armada-xp-linksys-mamba-wan.patch
delete mode 100644 target/linux/mvebu/patches-5.4/309-linksys-status-led.patch
delete mode 100644 target/linux/mvebu/patches-5.4/310-linksys-use-eth0-as-cpu-port.patch
delete mode 100644 target/linux/mvebu/patches-5.4/311-adjust-compatible-for-linksys.patch
delete mode 100644 target/linux/mvebu/patches-5.4/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
delete mode 100644 target/linux/mvebu/patches-5.4/312-helios4-dts-status-led-alias.patch
delete mode 100644 target/linux/mvebu/patches-5.4/314-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
delete mode 100644 target/linux/mvebu/patches-5.4/315-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
delete mode 100644 target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch
delete mode 100644 target/linux/mvebu/patches-5.4/318-armada-xp-linksys-mamba-resize-kernel.patch
delete mode 100644 target/linux/mvebu/patches-5.4/320-armada-370-dts-fix-crypto-engine.patch
delete mode 100644 target/linux/mvebu/patches-5.4/400-find_active_root.patch
delete mode 100644 target/linux/mvebu/patches-5.4/700-mvneta-tx-queue-workaround.patch
delete mode 100644 target/linux/mvebu/patches-5.4/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
delete mode 100644 target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch
diff --git a/target/linux/mvebu/config-5.4 b/target/linux/mvebu/config-5.4
deleted file mode 100644
index 3ee595c728..0000000000
--- a/target/linux/mvebu/config-5.4
+++ /dev/null
@@ -1,421 +0,0 @@
-CONFIG_AHCI_MVEBU=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARMADA_370_CLK=y
-CONFIG_ARMADA_370_XP_IRQ=y
-CONFIG_ARMADA_370_XP_TIMER=y
-# CONFIG_ARMADA_37XX_WATCHDOG is not set
-CONFIG_ARMADA_38X_CLK=y
-CONFIG_ARMADA_THERMAL=y
-CONFIG_ARMADA_XP_CLK=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
-# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_MVEBU_V7_CPUIDLE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_LEDS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_FEROCEON_L2 is not set
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PJ4B=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AES_ARM_BS=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRYPTO_ESSIV=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=y
-CONFIG_CRYPTO_SHA256_ARM=y
-CONFIG_CRYPTO_SHA512_ARM=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART0=y
-# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
-# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xd0012000
-CONFIG_DEBUG_UART_VIRT=0xfec12000
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWBM=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_PXA is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_IWMMXT is not set
-CONFIG_JBD2=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PCA963X=y
-CONFIG_LEDS_TLC591XX=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_ARMADA_370=y
-# CONFIG_MACH_ARMADA_375 is not set
-CONFIG_MACH_ARMADA_38X=y
-# CONFIG_MACH_ARMADA_39X is not set
-CONFIG_MACH_ARMADA_XP=y
-# CONFIG_MACH_DOVE is not set
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MACH_MVEBU_V7=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_I2C=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MVSDIO=y
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_PXAV3=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_MARVELL=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_CLK_COREDIV=y
-CONFIG_MVEBU_CLK_CPU=y
-CONFIG_MVEBU_DEVBUS=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-CONFIG_MVNETA=y
-CONFIG_MVNETA_BM=y
-CONFIG_MVNETA_BM_ENABLE=y
-# CONFIG_MVPP2 is not set
-CONFIG_MV_XOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_WATCHDOG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PCI=y
-CONFIG_PCI_BRIDGE_EMUL=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_MVEBU_A3700_COMPHY is not set
-# CONFIG_PHY_MVEBU_A3700_UTMI is not set
-CONFIG_PHY_MVEBU_A38X_COMPHY=y
-# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_38X=y
-CONFIG_PINCTRL_ARMADA_XP=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PJ4B_ERRATA_4742=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PLAT_ORION=y
-CONFIG_PM_OPP=y
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=11
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_ARMADA38X=y
-CONFIG_RTC_DRV_MV=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-# CONFIG_SENSORS_DRIVETEMP is not set
-CONFIG_SENSORS_PWM_FAN=y
-CONFIG_SENSORS_TMP421=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_MVEBU_CONSOLE=y
-CONFIG_SERIAL_MVEBU_UART=y
-CONFIG_SFP=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_ARMADA_3700 is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_ORION=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_ORION=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_LEDS_TRIGGER_USBPORT=y
-CONFIG_USB_PHY=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MVEBU=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/mvebu/cortexa53/config-5.4 b/target/linux/mvebu/cortexa53/config-5.4
deleted file mode 100644
index b88de78ee4..0000000000
--- a/target/linux/mvebu/cortexa53/config-5.4
+++ /dev/null
@@ -1,92 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CONT_SHIFT=4
-# CONFIG_ARM64_ERRATUM_1165522 is not set
-# CONFIG_ARM64_ERRATUM_1286807 is not set
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_AP_CP_HELPER=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DRM_RCAR_WRITEBACK=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FUJITSU_ERRATUM_010001 is not set
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_MFD_SYSCON=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_MVEBU_SEI=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MVEBU_A3700_COMPHY=y
-CONFIG_PHY_MVEBU_A3700_UTMI=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POWER_RESET=y
-# CONFIG_POWER_RESET_LINKSTATION is not set
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPI_ARMADA_3700=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y
diff --git a/target/linux/mvebu/cortexa72/config-5.4 b/target/linux/mvebu/cortexa72/config-5.4
deleted file mode 100644
index 12b2ea399c..0000000000
--- a/target/linux/mvebu/cortexa72/config-5.4
+++ /dev/null
@@ -1,99 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CONT_SHIFT=4
-# CONFIG_ARM64_ERRATUM_1165522 is not set
-# CONFIG_ARM64_ERRATUM_1286807 is not set
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-# CONFIG_ARM64_PTR_AUTH is not set
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-# CONFIG_ARM64_TAGGED_ADDR_ABI is not set
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_AP_CP_HELPER=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DRM_RCAR_WRITEBACK=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FUJITSU_ERRATUM_010001 is not set
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_MARVELL_10G_PHY=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_MVEBU_SEI=y
-CONFIG_MVPP2=y
-CONFIG_MV_XOR_V2=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_ARMADA_8K=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-# CONFIG_PCI_AARDVARK is not set
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MVEBU_CP110_COMPHY=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POWER_RESET=y
-# CONFIG_POWER_RESET_LINKSTATION is not set
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RAS=y
-CONFIG_REGULATOR_GPIO=y
-# CONFIG_RODATA_FULL_DEFAULT_ENABLED is not set
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y
diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
deleted file mode 100644
index e3bed4d445..0000000000
--- a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier at free-electrons.com>
- * Konstantin Porotchkin <kostap at marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
- model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
- compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
- "marvell,armada3720", "marvell,armada3710";
-};
-
-&sdhci0 {
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
- mmccard: mmccard at 0 {
- compatible = "mmc-card";
- reg = <0>;
- };
-};
diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
deleted file mode 100644
index e1e0071434..0000000000
--- a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier at free-electrons.com>
- * Konstantin Porotchkin <kostap at marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
- model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
- compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
- "globalscale,espressobin", "marvell,armada3720",
- "marvell,armada3710";
-};
-
-&ports {
- port at 1 {
- reg = <1>;
- label = "lan1";
- phy-handle = <&switch0phy0>;
- };
-
- port at 3 {
- reg = <3>;
- label = "wan";
- phy-handle = <&switch0phy2>;
- };
-};
-
-&sdhci0 {
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
- mmccard: mmccard at 0 {
- compatible = "mmc-card";
- reg = <0>;
- };
-};
diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
deleted file mode 100644
index 40f18409bf..0000000000
--- a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier at free-electrons.com>
- * Konstantin Porotchkin <kostap at marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
- model = "Globalscale Marvell ESPRESSOBin Board V7";
- compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
- "marvell,armada3720", "marvell,armada3710";
-};
-
-&ports {
- port at 1 {
- reg = <1>;
- label = "lan1";
- phy-handle = <&switch0phy0>;
- };
-
- port at 3 {
- reg = <3>;
- label = "wan";
- phy-handle = <&switch0phy2>;
- };
-};
diff --git a/target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch b/target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch
deleted file mode 100644
index 0f4d14188d..0000000000
--- a/target/linux/mvebu/patches-5.4/000-v5.5-arm64-dts-marvell-Add-support-for-Marvell-CN9130-SoC.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 6b8970bd8d7a17a648e31f3996d9b21336b4a2cf Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal at bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:35 +0200
-Subject: [PATCH] arm64: dts: marvell: Add support for Marvell CN9130 SoC
- support
-
-A CN9130 SoC has one AP807 and one internal CP115.
-
-Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm64/boot/dts/marvell/cn9130.dtsi | 37 +++++++++++++++++++++++++
- 1 file changed, 37 insertions(+)
- create mode 100644 arch/arm64/boot/dts/marvell/cn9130.dtsi
-
---- /dev/null
-+++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi
-@@ -0,0 +1,37 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Marvell International Ltd.
-+ *
-+ * Device tree for the CN9130 SoC.
-+ */
-+
-+#include "armada-ap807-quad.dtsi"
-+
-+/ {
-+ model = "Marvell Armada CN9130 SoC";
-+ compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
-+ "marvell,armada-ap807";
-+};
-+
-+/*
-+ * Instantiate the internal CP115
-+ */
-+
-+#define CP11X_NAME cp0
-+#define CP11X_BASE f2000000
-+#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \
-+ 0xe0000000 + ((iface - 1) * 0x1000000))
-+#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000)
-+#define CP11X_PCIE0_BASE f2600000
-+#define CP11X_PCIE1_BASE f2620000
-+#define CP11X_PCIE2_BASE f2640000
-+
-+#include "armada-cp115.dtsi"
-+
-+#undef CP11X_NAME
-+#undef CP11X_BASE
-+#undef CP11X_PCIEx_MEM_BASE
-+#undef CP11X_PCIEx_MEM_SIZE
-+#undef CP11X_PCIE0_BASE
-+#undef CP11X_PCIE1_BASE
-+#undef CP11X_PCIE2_BASE
diff --git a/target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch b/target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch
deleted file mode 100644
index 31f5accab6..0000000000
--- a/target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From f4c7d053d7f77cd5c1a1ba7c7ce085ddba13d1d7 Mon Sep 17 00:00:00 2001
-From: Remi Pommarel <repk at triplefau.lt>
-Date: Wed, 22 May 2019 23:33:50 +0200
-Subject: [PATCH] PCI: aardvark: Wait for endpoint to be ready before training
- link
-
-When configuring pcie reset pin from gpio (e.g. initially set by
-u-boot) to pcie function this pin goes low for a brief moment
-asserting the PERST# signal. Thus connected device enters fundamental
-reset process and link configuration can only begin after a minimal
-100ms delay (see [1]).
-
-Because the pin configuration comes from the "default" pinctrl it is
-implicitly configured before the probe callback is called:
-
-driver_probe_device()
- really_probe()
- ...
- pinctrl_bind_pins() /* Here pin goes from gpio to PCIE reset
- function and PERST# is asserted */
- ...
- drv->probe()
-
-[1] "PCI Express Base Specification", REV. 4.0
- PCI Express, February 19 2014, 6.6.1 Conventional Reset
-
-Signed-off-by: Remi Pommarel <repk at triplefau.lt>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
----
- drivers/pci/controller/pci-aardvark.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -349,6 +349,14 @@ static void advk_pcie_setup_hw(struct ad
- reg |= PIO_CTRL_ADDR_WIN_DISABLE;
- advk_writel(pcie, reg, PIO_CTRL);
-
-+ /*
-+ * PERST# signal could have been asserted by pinctrl subsystem before
-+ * probe() callback has been called, making the endpoint going into
-+ * fundamental reset. As required by PCI Express spec a delay for at
-+ * least 100ms after such a reset before link training is needed.
-+ */
-+ msleep(PCI_PM_D3COLD_WAIT);
-+
- /* Start link training */
- reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
- reg |= PCIE_CORE_LINK_TRAINING;
diff --git a/target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-support-for-CP115.patch b/target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-support-for-CP115.patch
deleted file mode 100644
index 1ef87ed227..0000000000
--- a/target/linux/mvebu/patches-5.4/001-v5.5-arm64-dts-marvell-Add-support-for-CP115.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 96bb4b31aa660e39fca2bb464b9a9f399bd5b71c Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal at bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:32 +0200
-Subject: [PATCH] arm64: dts: marvell: Add support for CP115
-
-Create a DTSI file based on the CP11x one. Differences will be
-described in the near future.
-
-Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-cp115.dtsi | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
- create mode 100644 arch/arm64/boot/dts/marvell/armada-cp115.dtsi
-
---- /dev/null
-+++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
-@@ -0,0 +1,12 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Marvell Technology Group Ltd.
-+ *
-+ * Device Tree file for Marvell Armada CP115.
-+ */
-+
-+#define CP11X_TYPE cp115
-+
-+#include "armada-cp11x.dtsi"
-+
-+#undef CP11X_TYPE
diff --git a/target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch b/target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch
deleted file mode 100644
index 5e41f548d6..0000000000
--- a/target/linux/mvebu/patches-5.4/002-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-CP115.patch
+++ /dev/null
@@ -1,1318 +0,0 @@
-From 47cf40af64c35a69ef6a193c47768ad1bda29db2 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal at bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:29 +0200
-Subject: [PATCH] arm64: dts: marvell: Prepare the introduction of CP115
-
-CP110 and CP115 are almost the same in terms of features and have a
-very limited set of differences. Let's create an armada-cp11x.dtsi
-file which will be used to instantiate both CP110 and CP115
-nodes.
-
-The only changes between the two armada-cp11{0,x}.dtsi files are the
-following naming in macros: s/CP110/CP11X/.
-
-Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 28 +-
- arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 56 +-
- .../arm64/boot/dts/marvell/armada-common.dtsi | 4 +-
- arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 575 +----------------
- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 579 ++++++++++++++++++
- 5 files changed, 627 insertions(+), 615 deletions(-)
- create mode 100644 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
-
---- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
-@@ -17,23 +17,23 @@
- /*
- * Instantiate the CP110
- */
--#define CP110_NAME cp0
--#define CP110_BASE f2000000
--#define CP110_PCIE_IO_BASE 0xf9000000
--#define CP110_PCIE_MEM_BASE 0xf6000000
--#define CP110_PCIE0_BASE f2600000
--#define CP110_PCIE1_BASE f2620000
--#define CP110_PCIE2_BASE f2640000
-+#define CP11X_NAME cp0
-+#define CP11X_BASE f2000000
-+#define CP11X_PCIE_IO_BASE 0xf9000000
-+#define CP11X_PCIE_MEM_BASE 0xf6000000
-+#define CP11X_PCIE0_BASE f2600000
-+#define CP11X_PCIE1_BASE f2620000
-+#define CP11X_PCIE2_BASE f2640000
-
- #include "armada-cp110.dtsi"
-
--#undef CP110_NAME
--#undef CP110_BASE
--#undef CP110_PCIE_IO_BASE
--#undef CP110_PCIE_MEM_BASE
--#undef CP110_PCIE0_BASE
--#undef CP110_PCIE1_BASE
--#undef CP110_PCIE2_BASE
-+#undef CP11X_NAME
-+#undef CP11X_BASE
-+#undef CP11X_PCIE_IO_BASE
-+#undef CP11X_PCIE_MEM_BASE
-+#undef CP11X_PCIE0_BASE
-+#undef CP11X_PCIE1_BASE
-+#undef CP11X_PCIE2_BASE
-
- &cp0_gpio1 {
- status = "okay";
---- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
-@@ -19,44 +19,44 @@
- /*
- * Instantiate the master CP110
- */
--#define CP110_NAME cp0
--#define CP110_BASE f2000000
--#define CP110_PCIE_IO_BASE 0xf9000000
--#define CP110_PCIE_MEM_BASE 0xf6000000
--#define CP110_PCIE0_BASE f2600000
--#define CP110_PCIE1_BASE f2620000
--#define CP110_PCIE2_BASE f2640000
-+#define CP11X_NAME cp0
-+#define CP11X_BASE f2000000
-+#define CP11X_PCIE_IO_BASE 0xf9000000
-+#define CP11X_PCIE_MEM_BASE 0xf6000000
-+#define CP11X_PCIE0_BASE f2600000
-+#define CP11X_PCIE1_BASE f2620000
-+#define CP11X_PCIE2_BASE f2640000
-
- #include "armada-cp110.dtsi"
-
--#undef CP110_NAME
--#undef CP110_BASE
--#undef CP110_PCIE_IO_BASE
--#undef CP110_PCIE_MEM_BASE
--#undef CP110_PCIE0_BASE
--#undef CP110_PCIE1_BASE
--#undef CP110_PCIE2_BASE
-+#undef CP11X_NAME
-+#undef CP11X_BASE
-+#undef CP11X_PCIE_IO_BASE
-+#undef CP11X_PCIE_MEM_BASE
-+#undef CP11X_PCIE0_BASE
-+#undef CP11X_PCIE1_BASE
-+#undef CP11X_PCIE2_BASE
-
- /*
- * Instantiate the slave CP110
- */
--#define CP110_NAME cp1
--#define CP110_BASE f4000000
--#define CP110_PCIE_IO_BASE 0xfd000000
--#define CP110_PCIE_MEM_BASE 0xfa000000
--#define CP110_PCIE0_BASE f4600000
--#define CP110_PCIE1_BASE f4620000
--#define CP110_PCIE2_BASE f4640000
-+#define CP11X_NAME cp1
-+#define CP11X_BASE f4000000
-+#define CP11X_PCIE_IO_BASE 0xfd000000
-+#define CP11X_PCIE_MEM_BASE 0xfa000000
-+#define CP11X_PCIE0_BASE f4600000
-+#define CP11X_PCIE1_BASE f4620000
-+#define CP11X_PCIE2_BASE f4640000
-
- #include "armada-cp110.dtsi"
-
--#undef CP110_NAME
--#undef CP110_BASE
--#undef CP110_PCIE_IO_BASE
--#undef CP110_PCIE_MEM_BASE
--#undef CP110_PCIE0_BASE
--#undef CP110_PCIE1_BASE
--#undef CP110_PCIE2_BASE
-+#undef CP11X_NAME
-+#undef CP11X_BASE
-+#undef CP11X_PCIE_IO_BASE
-+#undef CP11X_PCIE_MEM_BASE
-+#undef CP11X_PCIE0_BASE
-+#undef CP11X_PCIE1_BASE
-+#undef CP11X_PCIE2_BASE
-
- /* The 80x0 has two CP blocks, but uses only one block from each. */
- &cp1_gpio1 {
---- a/arch/arm64/boot/dts/marvell/armada-common.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi
-@@ -6,6 +6,6 @@
- /* Common definitions used by Armada 7K/8K DTs */
- #define PASTER(x, y) x ## y
- #define EVALUATOR(x, y) PASTER(x, y)
--#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
--#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name))
-+#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name))
-+#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name))
- #define ADDRESSIFY(addr) EVALUATOR(0x, addr)
---- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
-@@ -1,579 +1,12 @@
- // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- /*
-- * Copyright (C) 2016 Marvell Technology Group Ltd.
-+ * Copyright (C) 2019 Marvell Technology Group Ltd.
- *
- * Device Tree file for Marvell Armada CP110.
- */
-
--#include <dt-bindings/interrupt-controller/mvebu-icu.h>
--#include <dt-bindings/thermal/thermal.h>
-+#define CP11X_TYPE cp110
-
--#include "armada-common.dtsi"
-+#include "armada-cp11x.dtsi"
-
--#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000))
--#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000))
--#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000)
--
--/ {
-- /*
-- * The contents of the node are defined below, in order to
-- * save one indentation level
-- */
-- CP110_NAME: CP110_NAME { };
--
-- /*
-- * CPs only have one sensor in the thermal IC.
-- *
-- * The cooling maps are empty as there are no cooling devices.
-- */
-- thermal-zones {
-- CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) {
-- polling-delay-passive = <0>; /* Interrupt driven */
-- polling-delay = <0>; /* Interrupt driven */
--
-- thermal-sensors = <&CP110_LABEL(thermal) 0>;
--
-- trips {
-- CP110_LABEL(crit): crit {
-- temperature = <100000>; /* mC degrees */
-- hysteresis = <2000>; /* mC degrees */
-- type = "critical";
-- };
-- };
--
-- cooling-maps { };
-- };
-- };
--};
--
--&CP110_NAME {
-- #address-cells = <2>;
-- #size-cells = <2>;
-- compatible = "simple-bus";
-- interrupt-parent = <&CP110_LABEL(icu_nsr)>;
-- ranges;
--
-- config-space at CP110_BASE {
-- #address-cells = <1>;
-- #size-cells = <1>;
-- compatible = "simple-bus";
-- ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>;
--
-- CP110_LABEL(ethernet): ethernet at 0 {
-- compatible = "marvell,armada-7k-pp22";
-- reg = <0x0 0x100000>, <0x129000 0xb000>;
-- clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>,
-- <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
-- <&CP110_LABEL(clk) 1 18>;
-- clock-names = "pp_clk", "gop_clk",
-- "mg_clk", "mg_core_clk", "axi_clk";
-- marvell,system-controller = <&CP110_LABEL(syscon0)>;
-- status = "disabled";
-- dma-coherent;
--
-- CP110_LABEL(eth0): eth0 {
-- interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
-- <43 IRQ_TYPE_LEVEL_HIGH>,
-- <47 IRQ_TYPE_LEVEL_HIGH>,
-- <51 IRQ_TYPE_LEVEL_HIGH>,
-- <55 IRQ_TYPE_LEVEL_HIGH>,
-- <59 IRQ_TYPE_LEVEL_HIGH>,
-- <63 IRQ_TYPE_LEVEL_HIGH>,
-- <67 IRQ_TYPE_LEVEL_HIGH>,
-- <71 IRQ_TYPE_LEVEL_HIGH>,
-- <129 IRQ_TYPE_LEVEL_HIGH>;
-- interrupt-names = "hif0", "hif1", "hif2",
-- "hif3", "hif4", "hif5", "hif6", "hif7",
-- "hif8", "link";
-- port-id = <0>;
-- gop-port-id = <0>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(eth1): eth1 {
-- interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
-- <44 IRQ_TYPE_LEVEL_HIGH>,
-- <48 IRQ_TYPE_LEVEL_HIGH>,
-- <52 IRQ_TYPE_LEVEL_HIGH>,
-- <56 IRQ_TYPE_LEVEL_HIGH>,
-- <60 IRQ_TYPE_LEVEL_HIGH>,
-- <64 IRQ_TYPE_LEVEL_HIGH>,
-- <68 IRQ_TYPE_LEVEL_HIGH>,
-- <72 IRQ_TYPE_LEVEL_HIGH>,
-- <128 IRQ_TYPE_LEVEL_HIGH>;
-- interrupt-names = "hif0", "hif1", "hif2",
-- "hif3", "hif4", "hif5", "hif6", "hif7",
-- "hif8", "link";
-- port-id = <1>;
-- gop-port-id = <2>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(eth2): eth2 {
-- interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
-- <45 IRQ_TYPE_LEVEL_HIGH>,
-- <49 IRQ_TYPE_LEVEL_HIGH>,
-- <53 IRQ_TYPE_LEVEL_HIGH>,
-- <57 IRQ_TYPE_LEVEL_HIGH>,
-- <61 IRQ_TYPE_LEVEL_HIGH>,
-- <65 IRQ_TYPE_LEVEL_HIGH>,
-- <69 IRQ_TYPE_LEVEL_HIGH>,
-- <73 IRQ_TYPE_LEVEL_HIGH>,
-- <127 IRQ_TYPE_LEVEL_HIGH>;
-- interrupt-names = "hif0", "hif1", "hif2",
-- "hif3", "hif4", "hif5", "hif6", "hif7",
-- "hif8", "link";
-- port-id = <2>;
-- gop-port-id = <3>;
-- status = "disabled";
-- };
-- };
--
-- CP110_LABEL(comphy): phy at 120000 {
-- compatible = "marvell,comphy-cp110";
-- reg = <0x120000 0x6000>;
-- marvell,system-controller = <&CP110_LABEL(syscon0)>;
-- clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
-- <&CP110_LABEL(clk) 1 18>;
-- clock-names = "mg_clk", "mg_core_clk", "axi_clk";
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- CP110_LABEL(comphy0): phy at 0 {
-- reg = <0>;
-- #phy-cells = <1>;
-- };
--
-- CP110_LABEL(comphy1): phy at 1 {
-- reg = <1>;
-- #phy-cells = <1>;
-- };
--
-- CP110_LABEL(comphy2): phy at 2 {
-- reg = <2>;
-- #phy-cells = <1>;
-- };
--
-- CP110_LABEL(comphy3): phy at 3 {
-- reg = <3>;
-- #phy-cells = <1>;
-- };
--
-- CP110_LABEL(comphy4): phy at 4 {
-- reg = <4>;
-- #phy-cells = <1>;
-- };
--
-- CP110_LABEL(comphy5): phy at 5 {
-- reg = <5>;
-- #phy-cells = <1>;
-- };
-- };
--
-- CP110_LABEL(mdio): mdio at 12a200 {
-- #address-cells = <1>;
-- #size-cells = <0>;
-- compatible = "marvell,orion-mdio";
-- reg = <0x12a200 0x10>;
-- clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>,
-- <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(xmdio): mdio at 12a600 {
-- #address-cells = <1>;
-- #size-cells = <0>;
-- compatible = "marvell,xmdio";
-- reg = <0x12a600 0x10>;
-- clocks = <&CP110_LABEL(clk) 1 5>,
-- <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(icu): interrupt-controller at 1e0000 {
-- compatible = "marvell,cp110-icu";
-- reg = <0x1e0000 0x440>;
-- #address-cells = <1>;
-- #size-cells = <1>;
--
-- CP110_LABEL(icu_nsr): interrupt-controller at 10 {
-- compatible = "marvell,cp110-icu-nsr";
-- reg = <0x10 0x20>;
-- #interrupt-cells = <2>;
-- interrupt-controller;
-- msi-parent = <&gicp>;
-- };
--
-- CP110_LABEL(icu_sei): interrupt-controller at 50 {
-- compatible = "marvell,cp110-icu-sei";
-- reg = <0x50 0x10>;
-- #interrupt-cells = <2>;
-- interrupt-controller;
-- msi-parent = <&sei>;
-- };
-- };
--
-- CP110_LABEL(rtc): rtc at 284000 {
-- compatible = "marvell,armada-8k-rtc";
-- reg = <0x284000 0x20>, <0x284080 0x24>;
-- reg-names = "rtc", "rtc-soc";
-- interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
-- };
--
-- CP110_LABEL(syscon0): system-controller at 440000 {
-- compatible = "syscon", "simple-mfd";
-- reg = <0x440000 0x2000>;
--
-- CP110_LABEL(clk): clock {
-- compatible = "marvell,cp110-clock";
-- #clock-cells = <2>;
-- };
--
-- CP110_LABEL(gpio1): gpio at 100 {
-- compatible = "marvell,armada-8k-gpio";
-- offset = <0x100>;
-- ngpios = <32>;
-- gpio-controller;
-- #gpio-cells = <2>;
-- gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
-- interrupt-controller;
-- interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
-- <85 IRQ_TYPE_LEVEL_HIGH>,
-- <84 IRQ_TYPE_LEVEL_HIGH>,
-- <83 IRQ_TYPE_LEVEL_HIGH>;
-- #interrupt-cells = <2>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(gpio2): gpio at 140 {
-- compatible = "marvell,armada-8k-gpio";
-- offset = <0x140>;
-- ngpios = <31>;
-- gpio-controller;
-- #gpio-cells = <2>;
-- gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
-- interrupt-controller;
-- interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
-- <81 IRQ_TYPE_LEVEL_HIGH>,
-- <80 IRQ_TYPE_LEVEL_HIGH>,
-- <79 IRQ_TYPE_LEVEL_HIGH>;
-- #interrupt-cells = <2>;
-- status = "disabled";
-- };
-- };
--
-- CP110_LABEL(syscon1): system-controller at 400000 {
-- compatible = "syscon", "simple-mfd";
-- reg = <0x400000 0x1000>;
-- #address-cells = <1>;
-- #size-cells = <1>;
--
-- CP110_LABEL(thermal): thermal-sensor at 70 {
-- compatible = "marvell,armada-cp110-thermal";
-- reg = <0x70 0x10>;
-- interrupts-extended =
-- <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
-- #thermal-sensor-cells = <1>;
-- };
-- };
--
-- CP110_LABEL(usb3_0): usb3 at 500000 {
-- compatible = "marvell,armada-8k-xhci",
-- "generic-xhci";
-- reg = <0x500000 0x4000>;
-- dma-coherent;
-- interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
-- clock-names = "core", "reg";
-- clocks = <&CP110_LABEL(clk) 1 22>,
-- <&CP110_LABEL(clk) 1 16>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(usb3_1): usb3 at 510000 {
-- compatible = "marvell,armada-8k-xhci",
-- "generic-xhci";
-- reg = <0x510000 0x4000>;
-- dma-coherent;
-- interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
-- clock-names = "core", "reg";
-- clocks = <&CP110_LABEL(clk) 1 23>,
-- <&CP110_LABEL(clk) 1 16>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(sata0): sata at 540000 {
-- compatible = "marvell,armada-8k-ahci",
-- "generic-ahci";
-- reg = <0x540000 0x30000>;
-- dma-coherent;
-- interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&CP110_LABEL(clk) 1 15>,
-- <&CP110_LABEL(clk) 1 16>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- status = "disabled";
--
-- sata-port at 0 {
-- reg = <0>;
-- };
--
-- sata-port at 1 {
-- reg = <1>;
-- };
-- };
--
-- CP110_LABEL(xor0): xor at 6a0000 {
-- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-- reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
-- dma-coherent;
-- msi-parent = <&gic_v2m0>;
-- clock-names = "core", "reg";
-- clocks = <&CP110_LABEL(clk) 1 8>,
-- <&CP110_LABEL(clk) 1 14>;
-- };
--
-- CP110_LABEL(xor1): xor at 6c0000 {
-- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-- reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
-- dma-coherent;
-- msi-parent = <&gic_v2m0>;
-- clock-names = "core", "reg";
-- clocks = <&CP110_LABEL(clk) 1 7>,
-- <&CP110_LABEL(clk) 1 14>;
-- };
--
-- CP110_LABEL(spi0): spi at 700600 {
-- compatible = "marvell,armada-380-spi";
-- reg = <0x700600 0x50>;
-- #address-cells = <0x1>;
-- #size-cells = <0x0>;
-- clock-names = "core", "axi";
-- clocks = <&CP110_LABEL(clk) 1 21>,
-- <&CP110_LABEL(clk) 1 17>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(spi1): spi at 700680 {
-- compatible = "marvell,armada-380-spi";
-- reg = <0x700680 0x50>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- clock-names = "core", "axi";
-- clocks = <&CP110_LABEL(clk) 1 21>,
-- <&CP110_LABEL(clk) 1 17>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(i2c0): i2c at 701000 {
-- compatible = "marvell,mv78230-i2c";
-- reg = <0x701000 0x20>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
-- clock-names = "core", "reg";
-- clocks = <&CP110_LABEL(clk) 1 21>,
-- <&CP110_LABEL(clk) 1 17>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(i2c1): i2c at 701100 {
-- compatible = "marvell,mv78230-i2c";
-- reg = <0x701100 0x20>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
-- clock-names = "core", "reg";
-- clocks = <&CP110_LABEL(clk) 1 21>,
-- <&CP110_LABEL(clk) 1 17>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(uart0): serial at 702000 {
-- compatible = "snps,dw-apb-uart";
-- reg = <0x702000 0x100>;
-- reg-shift = <2>;
-- interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
-- reg-io-width = <1>;
-- clock-names = "baudclk", "apb_pclk";
-- clocks = <&CP110_LABEL(clk) 1 21>,
-- <&CP110_LABEL(clk) 1 17>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(uart1): serial at 702100 {
-- compatible = "snps,dw-apb-uart";
-- reg = <0x702100 0x100>;
-- reg-shift = <2>;
-- interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
-- reg-io-width = <1>;
-- clock-names = "baudclk", "apb_pclk";
-- clocks = <&CP110_LABEL(clk) 1 21>,
-- <&CP110_LABEL(clk) 1 17>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(uart2): serial at 702200 {
-- compatible = "snps,dw-apb-uart";
-- reg = <0x702200 0x100>;
-- reg-shift = <2>;
-- interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
-- reg-io-width = <1>;
-- clock-names = "baudclk", "apb_pclk";
-- clocks = <&CP110_LABEL(clk) 1 21>,
-- <&CP110_LABEL(clk) 1 17>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(uart3): serial at 702300 {
-- compatible = "snps,dw-apb-uart";
-- reg = <0x702300 0x100>;
-- reg-shift = <2>;
-- interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
-- reg-io-width = <1>;
-- clock-names = "baudclk", "apb_pclk";
-- clocks = <&CP110_LABEL(clk) 1 21>,
-- <&CP110_LABEL(clk) 1 17>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(nand_controller): nand at 720000 {
-- /*
-- * Due to the limitation of the pins available
-- * this controller is only usable on the CPM
-- * for A7K and on the CPS for A8K.
-- */
-- compatible = "marvell,armada-8k-nand-controller",
-- "marvell,armada370-nand-controller";
-- reg = <0x720000 0x54>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
-- clock-names = "core", "reg";
-- clocks = <&CP110_LABEL(clk) 1 2>,
-- <&CP110_LABEL(clk) 1 17>;
-- marvell,system-controller = <&CP110_LABEL(syscon0)>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(trng): trng at 760000 {
-- compatible = "marvell,armada-8k-rng",
-- "inside-secure,safexcel-eip76";
-- reg = <0x760000 0x7d>;
-- interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
-- clock-names = "core", "reg";
-- clocks = <&CP110_LABEL(clk) 1 25>,
-- <&CP110_LABEL(clk) 1 17>;
-- status = "okay";
-- };
--
-- CP110_LABEL(sdhci0): sdhci at 780000 {
-- compatible = "marvell,armada-cp110-sdhci";
-- reg = <0x780000 0x300>;
-- interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
-- clock-names = "core", "axi";
-- clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>;
-- dma-coherent;
-- status = "disabled";
-- };
--
-- CP110_LABEL(crypto): crypto at 800000 {
-- compatible = "inside-secure,safexcel-eip197b";
-- reg = <0x800000 0x200000>;
-- interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
-- <88 IRQ_TYPE_LEVEL_HIGH>,
-- <89 IRQ_TYPE_LEVEL_HIGH>,
-- <90 IRQ_TYPE_LEVEL_HIGH>,
-- <91 IRQ_TYPE_LEVEL_HIGH>,
-- <92 IRQ_TYPE_LEVEL_HIGH>;
-- interrupt-names = "mem", "ring0", "ring1",
-- "ring2", "ring3", "eip";
-- clock-names = "core", "reg";
-- clocks = <&CP110_LABEL(clk) 1 26>,
-- <&CP110_LABEL(clk) 1 17>;
-- dma-coherent;
-- };
-- };
--
-- CP110_LABEL(pcie0): pcie at CP110_PCIE0_BASE {
-- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-- reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>,
-- <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>;
-- reg-names = "ctrl", "config";
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- device_type = "pci";
-- dma-coherent;
-- msi-parent = <&gic_v2m0>;
--
-- bus-range = <0 0xff>;
-- ranges =
-- /* downstream I/O */
-- <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000
-- /* non-prefetchable memory */
-- 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
-- interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-- num-lanes = <1>;
-- clock-names = "core", "reg";
-- clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(pcie1): pcie at CP110_PCIE1_BASE {
-- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-- reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>,
-- <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>;
-- reg-names = "ctrl", "config";
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- device_type = "pci";
-- dma-coherent;
-- msi-parent = <&gic_v2m0>;
--
-- bus-range = <0 0xff>;
-- ranges =
-- /* downstream I/O */
-- <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000
-- /* non-prefetchable memory */
-- 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
-- interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
--
-- num-lanes = <1>;
-- clock-names = "core", "reg";
-- clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1 14>;
-- status = "disabled";
-- };
--
-- CP110_LABEL(pcie2): pcie at CP110_PCIE2_BASE {
-- compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-- reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>,
-- <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>;
-- reg-names = "ctrl", "config";
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- device_type = "pci";
-- dma-coherent;
-- msi-parent = <&gic_v2m0>;
--
-- bus-range = <0 0xff>;
-- ranges =
-- /* downstream I/O */
-- <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000
-- /* non-prefetchable memory */
-- 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
-- interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
--
-- num-lanes = <1>;
-- clock-names = "core", "reg";
-- clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1 14>;
-- status = "disabled";
-- };
--};
-+#undef CP11X_TYPE
---- /dev/null
-+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
-@@ -0,0 +1,579 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2016 Marvell Technology Group Ltd.
-+ *
-+ * Device Tree file for Marvell Armada CP11x.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/mvebu-icu.h>
-+#include <dt-bindings/thermal/thermal.h>
-+
-+#include "armada-common.dtsi"
-+
-+#define CP11X_PCIEx_IO_BASE(iface) (CP11X_PCIE_IO_BASE + (iface * 0x10000))
-+#define CP11X_PCIEx_MEM_BASE(iface) (CP11X_PCIE_MEM_BASE + (iface * 0x1000000))
-+#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
-+
-+/ {
-+ /*
-+ * The contents of the node are defined below, in order to
-+ * save one indentation level
-+ */
-+ CP11X_NAME: CP11X_NAME { };
-+
-+ /*
-+ * CPs only have one sensor in the thermal IC.
-+ *
-+ * The cooling maps are empty as there are no cooling devices.
-+ */
-+ thermal-zones {
-+ CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) {
-+ polling-delay-passive = <0>; /* Interrupt driven */
-+ polling-delay = <0>; /* Interrupt driven */
-+
-+ thermal-sensors = <&CP11X_LABEL(thermal) 0>;
-+
-+ trips {
-+ CP11X_LABEL(crit): crit {
-+ temperature = <100000>; /* mC degrees */
-+ hysteresis = <2000>; /* mC degrees */
-+ type = "critical";
-+ };
-+ };
-+
-+ cooling-maps { };
-+ };
-+ };
-+};
-+
-+&CP11X_NAME {
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+ compatible = "simple-bus";
-+ interrupt-parent = <&CP11X_LABEL(icu_nsr)>;
-+ ranges;
-+
-+ config-space at CP11X_BASE {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "simple-bus";
-+ ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;
-+
-+ CP11X_LABEL(ethernet): ethernet at 0 {
-+ compatible = "marvell,armada-7k-pp22";
-+ reg = <0x0 0x100000>, <0x129000 0xb000>;
-+ clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>,
-+ <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
-+ <&CP11X_LABEL(clk) 1 18>;
-+ clock-names = "pp_clk", "gop_clk",
-+ "mg_clk", "mg_core_clk", "axi_clk";
-+ marvell,system-controller = <&CP11X_LABEL(syscon0)>;
-+ status = "disabled";
-+ dma-coherent;
-+
-+ CP11X_LABEL(eth0): eth0 {
-+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
-+ <43 IRQ_TYPE_LEVEL_HIGH>,
-+ <47 IRQ_TYPE_LEVEL_HIGH>,
-+ <51 IRQ_TYPE_LEVEL_HIGH>,
-+ <55 IRQ_TYPE_LEVEL_HIGH>,
-+ <59 IRQ_TYPE_LEVEL_HIGH>,
-+ <63 IRQ_TYPE_LEVEL_HIGH>,
-+ <67 IRQ_TYPE_LEVEL_HIGH>,
-+ <71 IRQ_TYPE_LEVEL_HIGH>,
-+ <129 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "hif0", "hif1", "hif2",
-+ "hif3", "hif4", "hif5", "hif6", "hif7",
-+ "hif8", "link";
-+ port-id = <0>;
-+ gop-port-id = <0>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(eth1): eth1 {
-+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
-+ <44 IRQ_TYPE_LEVEL_HIGH>,
-+ <48 IRQ_TYPE_LEVEL_HIGH>,
-+ <52 IRQ_TYPE_LEVEL_HIGH>,
-+ <56 IRQ_TYPE_LEVEL_HIGH>,
-+ <60 IRQ_TYPE_LEVEL_HIGH>,
-+ <64 IRQ_TYPE_LEVEL_HIGH>,
-+ <68 IRQ_TYPE_LEVEL_HIGH>,
-+ <72 IRQ_TYPE_LEVEL_HIGH>,
-+ <128 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "hif0", "hif1", "hif2",
-+ "hif3", "hif4", "hif5", "hif6", "hif7",
-+ "hif8", "link";
-+ port-id = <1>;
-+ gop-port-id = <2>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(eth2): eth2 {
-+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
-+ <45 IRQ_TYPE_LEVEL_HIGH>,
-+ <49 IRQ_TYPE_LEVEL_HIGH>,
-+ <53 IRQ_TYPE_LEVEL_HIGH>,
-+ <57 IRQ_TYPE_LEVEL_HIGH>,
-+ <61 IRQ_TYPE_LEVEL_HIGH>,
-+ <65 IRQ_TYPE_LEVEL_HIGH>,
-+ <69 IRQ_TYPE_LEVEL_HIGH>,
-+ <73 IRQ_TYPE_LEVEL_HIGH>,
-+ <127 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "hif0", "hif1", "hif2",
-+ "hif3", "hif4", "hif5", "hif6", "hif7",
-+ "hif8", "link";
-+ port-id = <2>;
-+ gop-port-id = <3>;
-+ status = "disabled";
-+ };
-+ };
-+
-+ CP11X_LABEL(comphy): phy at 120000 {
-+ compatible = "marvell,comphy-cp110";
-+ reg = <0x120000 0x6000>;
-+ marvell,system-controller = <&CP11X_LABEL(syscon0)>;
-+ clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
-+ <&CP11X_LABEL(clk) 1 18>;
-+ clock-names = "mg_clk", "mg_core_clk", "axi_clk";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ CP11X_LABEL(comphy0): phy at 0 {
-+ reg = <0>;
-+ #phy-cells = <1>;
-+ };
-+
-+ CP11X_LABEL(comphy1): phy at 1 {
-+ reg = <1>;
-+ #phy-cells = <1>;
-+ };
-+
-+ CP11X_LABEL(comphy2): phy at 2 {
-+ reg = <2>;
-+ #phy-cells = <1>;
-+ };
-+
-+ CP11X_LABEL(comphy3): phy at 3 {
-+ reg = <3>;
-+ #phy-cells = <1>;
-+ };
-+
-+ CP11X_LABEL(comphy4): phy at 4 {
-+ reg = <4>;
-+ #phy-cells = <1>;
-+ };
-+
-+ CP11X_LABEL(comphy5): phy at 5 {
-+ reg = <5>;
-+ #phy-cells = <1>;
-+ };
-+ };
-+
-+ CP11X_LABEL(mdio): mdio at 12a200 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "marvell,orion-mdio";
-+ reg = <0x12a200 0x10>;
-+ clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>,
-+ <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(xmdio): mdio at 12a600 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "marvell,xmdio";
-+ reg = <0x12a600 0x10>;
-+ clocks = <&CP11X_LABEL(clk) 1 5>,
-+ <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(icu): interrupt-controller at 1e0000 {
-+ compatible = "marvell,cp110-icu";
-+ reg = <0x1e0000 0x440>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ CP11X_LABEL(icu_nsr): interrupt-controller at 10 {
-+ compatible = "marvell,cp110-icu-nsr";
-+ reg = <0x10 0x20>;
-+ #interrupt-cells = <2>;
-+ interrupt-controller;
-+ msi-parent = <&gicp>;
-+ };
-+
-+ CP11X_LABEL(icu_sei): interrupt-controller at 50 {
-+ compatible = "marvell,cp110-icu-sei";
-+ reg = <0x50 0x10>;
-+ #interrupt-cells = <2>;
-+ interrupt-controller;
-+ msi-parent = <&sei>;
-+ };
-+ };
-+
-+ CP11X_LABEL(rtc): rtc at 284000 {
-+ compatible = "marvell,armada-8k-rtc";
-+ reg = <0x284000 0x20>, <0x284080 0x24>;
-+ reg-names = "rtc", "rtc-soc";
-+ interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ CP11X_LABEL(syscon0): system-controller at 440000 {
-+ compatible = "syscon", "simple-mfd";
-+ reg = <0x440000 0x2000>;
-+
-+ CP11X_LABEL(clk): clock {
-+ compatible = "marvell,cp110-clock";
-+ #clock-cells = <2>;
-+ };
-+
-+ CP11X_LABEL(gpio1): gpio at 100 {
-+ compatible = "marvell,armada-8k-gpio";
-+ offset = <0x100>;
-+ ngpios = <32>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>;
-+ interrupt-controller;
-+ interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
-+ <85 IRQ_TYPE_LEVEL_HIGH>,
-+ <84 IRQ_TYPE_LEVEL_HIGH>,
-+ <83 IRQ_TYPE_LEVEL_HIGH>;
-+ #interrupt-cells = <2>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(gpio2): gpio at 140 {
-+ compatible = "marvell,armada-8k-gpio";
-+ offset = <0x140>;
-+ ngpios = <31>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>;
-+ interrupt-controller;
-+ interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
-+ <81 IRQ_TYPE_LEVEL_HIGH>,
-+ <80 IRQ_TYPE_LEVEL_HIGH>,
-+ <79 IRQ_TYPE_LEVEL_HIGH>;
-+ #interrupt-cells = <2>;
-+ status = "disabled";
-+ };
-+ };
-+
-+ CP11X_LABEL(syscon1): system-controller at 400000 {
-+ compatible = "syscon", "simple-mfd";
-+ reg = <0x400000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ CP11X_LABEL(thermal): thermal-sensor at 70 {
-+ compatible = "marvell,armada-cp110-thermal";
-+ reg = <0x70 0x10>;
-+ interrupts-extended =
-+ <&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
-+ #thermal-sensor-cells = <1>;
-+ };
-+ };
-+
-+ CP11X_LABEL(usb3_0): usb3 at 500000 {
-+ compatible = "marvell,armada-8k-xhci",
-+ "generic-xhci";
-+ reg = <0x500000 0x4000>;
-+ dma-coherent;
-+ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
-+ clock-names = "core", "reg";
-+ clocks = <&CP11X_LABEL(clk) 1 22>,
-+ <&CP11X_LABEL(clk) 1 16>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(usb3_1): usb3 at 510000 {
-+ compatible = "marvell,armada-8k-xhci",
-+ "generic-xhci";
-+ reg = <0x510000 0x4000>;
-+ dma-coherent;
-+ interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
-+ clock-names = "core", "reg";
-+ clocks = <&CP11X_LABEL(clk) 1 23>,
-+ <&CP11X_LABEL(clk) 1 16>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(sata0): sata at 540000 {
-+ compatible = "marvell,armada-8k-ahci",
-+ "generic-ahci";
-+ reg = <0x540000 0x30000>;
-+ dma-coherent;
-+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&CP11X_LABEL(clk) 1 15>,
-+ <&CP11X_LABEL(clk) 1 16>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+
-+ sata-port at 0 {
-+ reg = <0>;
-+ };
-+
-+ sata-port at 1 {
-+ reg = <1>;
-+ };
-+ };
-+
-+ CP11X_LABEL(xor0): xor at 6a0000 {
-+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-+ reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
-+ dma-coherent;
-+ msi-parent = <&gic_v2m0>;
-+ clock-names = "core", "reg";
-+ clocks = <&CP11X_LABEL(clk) 1 8>,
-+ <&CP11X_LABEL(clk) 1 14>;
-+ };
-+
-+ CP11X_LABEL(xor1): xor at 6c0000 {
-+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-+ reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
-+ dma-coherent;
-+ msi-parent = <&gic_v2m0>;
-+ clock-names = "core", "reg";
-+ clocks = <&CP11X_LABEL(clk) 1 7>,
-+ <&CP11X_LABEL(clk) 1 14>;
-+ };
-+
-+ CP11X_LABEL(spi0): spi at 700600 {
-+ compatible = "marvell,armada-380-spi";
-+ reg = <0x700600 0x50>;
-+ #address-cells = <0x1>;
-+ #size-cells = <0x0>;
-+ clock-names = "core", "axi";
-+ clocks = <&CP11X_LABEL(clk) 1 21>,
-+ <&CP11X_LABEL(clk) 1 17>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(spi1): spi at 700680 {
-+ compatible = "marvell,armada-380-spi";
-+ reg = <0x700680 0x50>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ clock-names = "core", "axi";
-+ clocks = <&CP11X_LABEL(clk) 1 21>,
-+ <&CP11X_LABEL(clk) 1 17>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(i2c0): i2c at 701000 {
-+ compatible = "marvell,mv78230-i2c";
-+ reg = <0x701000 0x20>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
-+ clock-names = "core", "reg";
-+ clocks = <&CP11X_LABEL(clk) 1 21>,
-+ <&CP11X_LABEL(clk) 1 17>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(i2c1): i2c at 701100 {
-+ compatible = "marvell,mv78230-i2c";
-+ reg = <0x701100 0x20>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
-+ clock-names = "core", "reg";
-+ clocks = <&CP11X_LABEL(clk) 1 21>,
-+ <&CP11X_LABEL(clk) 1 17>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(uart0): serial at 702000 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x702000 0x100>;
-+ reg-shift = <2>;
-+ interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-io-width = <1>;
-+ clock-names = "baudclk", "apb_pclk";
-+ clocks = <&CP11X_LABEL(clk) 1 21>,
-+ <&CP11X_LABEL(clk) 1 17>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(uart1): serial at 702100 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x702100 0x100>;
-+ reg-shift = <2>;
-+ interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-io-width = <1>;
-+ clock-names = "baudclk", "apb_pclk";
-+ clocks = <&CP11X_LABEL(clk) 1 21>,
-+ <&CP11X_LABEL(clk) 1 17>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(uart2): serial at 702200 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x702200 0x100>;
-+ reg-shift = <2>;
-+ interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-io-width = <1>;
-+ clock-names = "baudclk", "apb_pclk";
-+ clocks = <&CP11X_LABEL(clk) 1 21>,
-+ <&CP11X_LABEL(clk) 1 17>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(uart3): serial at 702300 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x702300 0x100>;
-+ reg-shift = <2>;
-+ interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-io-width = <1>;
-+ clock-names = "baudclk", "apb_pclk";
-+ clocks = <&CP11X_LABEL(clk) 1 21>,
-+ <&CP11X_LABEL(clk) 1 17>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(nand_controller): nand at 720000 {
-+ /*
-+ * Due to the limitation of the pins available
-+ * this controller is only usable on the CPM
-+ * for A7K and on the CPS for A8K.
-+ */
-+ compatible = "marvell,armada-8k-nand-controller",
-+ "marvell,armada370-nand-controller";
-+ reg = <0x720000 0x54>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
-+ clock-names = "core", "reg";
-+ clocks = <&CP11X_LABEL(clk) 1 2>,
-+ <&CP11X_LABEL(clk) 1 17>;
-+ marvell,system-controller = <&CP11X_LABEL(syscon0)>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(trng): trng at 760000 {
-+ compatible = "marvell,armada-8k-rng",
-+ "inside-secure,safexcel-eip76";
-+ reg = <0x760000 0x7d>;
-+ interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
-+ clock-names = "core", "reg";
-+ clocks = <&CP11X_LABEL(clk) 1 25>,
-+ <&CP11X_LABEL(clk) 1 17>;
-+ status = "okay";
-+ };
-+
-+ CP11X_LABEL(sdhci0): sdhci at 780000 {
-+ compatible = "marvell,armada-cp110-sdhci";
-+ reg = <0x780000 0x300>;
-+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
-+ clock-names = "core", "axi";
-+ clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>;
-+ dma-coherent;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(crypto): crypto at 800000 {
-+ compatible = "inside-secure,safexcel-eip197b";
-+ reg = <0x800000 0x200000>;
-+ interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
-+ <88 IRQ_TYPE_LEVEL_HIGH>,
-+ <89 IRQ_TYPE_LEVEL_HIGH>,
-+ <90 IRQ_TYPE_LEVEL_HIGH>,
-+ <91 IRQ_TYPE_LEVEL_HIGH>,
-+ <92 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "mem", "ring0", "ring1",
-+ "ring2", "ring3", "eip";
-+ clock-names = "core", "reg";
-+ clocks = <&CP11X_LABEL(clk) 1 26>,
-+ <&CP11X_LABEL(clk) 1 17>;
-+ dma-coherent;
-+ };
-+ };
-+
-+ CP11X_LABEL(pcie0): pcie at CP11X_PCIE0_BASE {
-+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-+ reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>,
-+ <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>;
-+ reg-names = "ctrl", "config";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ device_type = "pci";
-+ dma-coherent;
-+ msi-parent = <&gic_v2m0>;
-+
-+ bus-range = <0 0xff>;
-+ ranges =
-+ /* downstream I/O */
-+ <0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0 CP11X_PCIEx_IO_BASE(0) 0 0x10000
-+ /* non-prefetchable memory */
-+ 0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-+ num-lanes = <1>;
-+ clock-names = "core", "reg";
-+ clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(pcie1): pcie at CP11X_PCIE1_BASE {
-+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-+ reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>,
-+ <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>;
-+ reg-names = "ctrl", "config";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ device_type = "pci";
-+ dma-coherent;
-+ msi-parent = <&gic_v2m0>;
-+
-+ bus-range = <0 0xff>;
-+ ranges =
-+ /* downstream I/O */
-+ <0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0 CP11X_PCIEx_IO_BASE(1) 0 0x10000
-+ /* non-prefetchable memory */
-+ 0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ num-lanes = <1>;
-+ clock-names = "core", "reg";
-+ clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>;
-+ status = "disabled";
-+ };
-+
-+ CP11X_LABEL(pcie2): pcie at CP11X_PCIE2_BASE {
-+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-+ reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>,
-+ <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>;
-+ reg-names = "ctrl", "config";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ device_type = "pci";
-+ dma-coherent;
-+ msi-parent = <&gic_v2m0>;
-+
-+ bus-range = <0 0xff>;
-+ ranges =
-+ /* downstream I/O */
-+ <0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0 CP11X_PCIEx_IO_BASE(2) 0 0x10000
-+ /* non-prefetchable memory */
-+ 0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ num-lanes = <1>;
-+ clock-names = "core", "reg";
-+ clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>;
-+ status = "disabled";
-+ };
-+};
diff --git a/target/linux/mvebu/patches-5.4/003-net-mvneta-introduce-mvneta_update_stats-routine.patch b/target/linux/mvebu/patches-5.4/003-net-mvneta-introduce-mvneta_update_stats-routine.patch
deleted file mode 100644
index f6ce6163cf..0000000000
--- a/target/linux/mvebu/patches-5.4/003-net-mvneta-introduce-mvneta_update_stats-routine.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From ff519e2acd463bff6c5bb4e8d7ed350c9bae885b Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo at kernel.org>
-Date: Sat, 19 Oct 2019 10:13:21 +0200
-Subject: [PATCH 1/7] net: mvneta: introduce mvneta_update_stats routine
-
-Introduce mvneta_update_stats routine to collect {rx/tx} statistics
-(packets and bytes). This is a preliminary patch to add XDP support to
-mvneta driver
-
-Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 43 ++++++++++++++-------------
- 1 file changed, 22 insertions(+), 21 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -1913,6 +1913,23 @@ static void mvneta_rxq_drop_pkts(struct
- }
- }
-
-+static void
-+mvneta_update_stats(struct mvneta_port *pp, u32 pkts,
-+ u32 len, bool tx)
-+{
-+ struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
-+
-+ u64_stats_update_begin(&stats->syncp);
-+ if (tx) {
-+ stats->tx_packets += pkts;
-+ stats->tx_bytes += len;
-+ } else {
-+ stats->rx_packets += pkts;
-+ stats->rx_bytes += len;
-+ }
-+ u64_stats_update_end(&stats->syncp);
-+}
-+
- static inline
- int mvneta_rx_refill_queue(struct mvneta_port *pp, struct mvneta_rx_queue *rxq)
- {
-@@ -2093,14 +2110,8 @@ static int mvneta_rx_swbm(struct napi_st
- rxq->left_size = 0;
- }
-
-- if (rcvd_pkts) {
-- struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
--
-- u64_stats_update_begin(&stats->syncp);
-- stats->rx_packets += rcvd_pkts;
-- stats->rx_bytes += rcvd_bytes;
-- u64_stats_update_end(&stats->syncp);
-- }
-+ if (rcvd_pkts)
-+ mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false);
-
- /* return some buffers to hardware queue, one at a time is too slow */
- refill = mvneta_rx_refill_queue(pp, rxq);
-@@ -2223,14 +2234,8 @@ err_drop_frame:
- napi_gro_receive(napi, skb);
- }
-
-- if (rcvd_pkts) {
-- struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
--
-- u64_stats_update_begin(&stats->syncp);
-- stats->rx_packets += rcvd_pkts;
-- stats->rx_bytes += rcvd_bytes;
-- u64_stats_update_end(&stats->syncp);
-- }
-+ if (rcvd_pkts)
-+ mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false);
-
- /* Update rxq management counters */
- mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
-@@ -2476,7 +2481,6 @@ static netdev_tx_t mvneta_tx(struct sk_b
-
- out:
- if (frags > 0) {
-- struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
- struct netdev_queue *nq = netdev_get_tx_queue(dev, txq_id);
-
- netdev_tx_sent_queue(nq, len);
-@@ -2491,10 +2495,7 @@ out:
- else
- txq->pending += frags;
-
-- u64_stats_update_begin(&stats->syncp);
-- stats->tx_packets++;
-- stats->tx_bytes += len;
-- u64_stats_update_end(&stats->syncp);
-+ mvneta_update_stats(pp, 1, len, true);
- } else {
- dev->stats.tx_dropped++;
- dev_kfree_skb_any(skb);
diff --git a/target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch b/target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch
deleted file mode 100644
index 72b46f51a7..0000000000
--- a/target/linux/mvebu/patches-5.4/003-v5.5-arm64-dts-marvell-Add-support-for-AP807-AP807-quad.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From cbafcad0641e99831ff7c57ac8f79aed502f33e5 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal at bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:24 +0200
-Subject: [PATCH] arm64: dts: marvell: Add support for AP807/AP807-quad
-
-Describe AP807 and AP807-quad support.
-
-Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- .../boot/dts/marvell/armada-ap807-quad.dtsi | 51 +++++++++++++++++++
- arch/arm64/boot/dts/marvell/armada-ap807.dtsi | 29 +++++++++++
- 2 files changed, 80 insertions(+)
- create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
- create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807.dtsi
-
---- /dev/null
-+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
-@@ -0,0 +1,51 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree file for Marvell Armada AP807 Quad
-+ *
-+ * Copyright (C) 2019 Marvell Technology Group Ltd.
-+ */
-+
-+#include "armada-ap807.dtsi"
-+
-+/ {
-+ model = "Marvell Armada AP807 Quad";
-+ compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807";
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ cpu0: cpu at 0 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a72", "arm,armv8";
-+ reg = <0x000>;
-+ enable-method = "psci";
-+ #cooling-cells = <2>;
-+ clocks = <&cpu_clk 0>;
-+ };
-+ cpu1: cpu at 1 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a72", "arm,armv8";
-+ reg = <0x001>;
-+ enable-method = "psci";
-+ #cooling-cells = <2>;
-+ clocks = <&cpu_clk 0>;
-+ };
-+ cpu2: cpu at 100 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a72", "arm,armv8";
-+ reg = <0x100>;
-+ enable-method = "psci";
-+ #cooling-cells = <2>;
-+ clocks = <&cpu_clk 1>;
-+ };
-+ cpu3: cpu at 101 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a72", "arm,armv8";
-+ reg = <0x101>;
-+ enable-method = "psci";
-+ #cooling-cells = <2>;
-+ clocks = <&cpu_clk 1>;
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
-@@ -0,0 +1,29 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Device Tree file for Marvell Armada AP807
-+ *
-+ * Copyright (C) 2019 Marvell Technology Group Ltd.
-+ */
-+
-+#define AP_NAME ap807
-+#include "armada-ap80x.dtsi"
-+
-+/ {
-+ model = "Marvell Armada AP807";
-+ compatible = "marvell,armada-ap807";
-+};
-+
-+&ap_syscon0 {
-+ ap_clk: clock {
-+ compatible = "marvell,ap807-clock";
-+ #clock-cells = <1>;
-+ };
-+};
-+
-+&ap_syscon1 {
-+ cpu_clk: clock-cpu {
-+ compatible = "marvell,ap807-cpu-clock";
-+ clocks = <&ap_clk 0>, <&ap_clk 1>;
-+ #clock-cells = <1>;
-+ };
-+};
diff --git a/target/linux/mvebu/patches-5.4/004-net-mvneta-introduce-page-pool-API-for-sw-buffer-man.patch b/target/linux/mvebu/patches-5.4/004-net-mvneta-introduce-page-pool-API-for-sw-buffer-man.patch
deleted file mode 100644
index fbcae20f74..0000000000
--- a/target/linux/mvebu/patches-5.4/004-net-mvneta-introduce-page-pool-API-for-sw-buffer-man.patch
+++ /dev/null
@@ -1,181 +0,0 @@
-From 568a3fa24a95476d40afe3f8616bafb543bc4182 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo at kernel.org>
-Date: Sat, 19 Oct 2019 10:13:22 +0200
-Subject: [PATCH 2/7] net: mvneta: introduce page pool API for sw buffer
- manager
-
-Use the page_pool api for allocations and DMA handling instead of
-__dev_alloc_page()/dma_map_page() and free_page()/dma_unmap_page().
-Pages are unmapped using page_pool_release_page before packets
-go into the network stack.
-
-The page_pool API offers buffer recycling capabilities for XDP but
-allocates one page per packet, unless the driver splits and manages
-the allocated page.
-This is a preliminary patch to add XDP support to mvneta driver
-
-Signed-off-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>
-Signed-off-by: Jesper Dangaard Brouer <brouer at redhat.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/Kconfig | 1 +
- drivers/net/ethernet/marvell/mvneta.c | 83 +++++++++++++++++++++------
- 2 files changed, 65 insertions(+), 19 deletions(-)
-
---- a/drivers/net/ethernet/marvell/Kconfig
-+++ b/drivers/net/ethernet/marvell/Kconfig
-@@ -61,6 +61,7 @@ config MVNETA
- depends on ARCH_MVEBU || COMPILE_TEST
- select MVMDIO
- select PHYLINK
-+ select PAGE_POOL
- ---help---
- This driver supports the network interface units in the
- Marvell ARMADA XP, ARMADA 370, ARMADA 38x and
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -37,6 +37,7 @@
- #include <net/ip.h>
- #include <net/ipv6.h>
- #include <net/tso.h>
-+#include <net/page_pool.h>
-
- /* Registers */
- #define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2))
-@@ -607,6 +608,10 @@ struct mvneta_rx_queue {
- u32 pkts_coal;
- u32 time_coal;
-
-+ /* page_pool */
-+ struct page_pool *page_pool;
-+ struct xdp_rxq_info xdp_rxq;
-+
- /* Virtual address of the RX buffer */
- void **buf_virt_addr;
-
-@@ -1825,23 +1830,21 @@ static int mvneta_rx_refill(struct mvnet
- struct mvneta_rx_queue *rxq,
- gfp_t gfp_mask)
- {
-+ enum dma_data_direction dma_dir;
- dma_addr_t phys_addr;
- struct page *page;
-
-- page = __dev_alloc_page(gfp_mask);
-+ page = page_pool_alloc_pages(rxq->page_pool,
-+ gfp_mask | __GFP_NOWARN);
- if (!page)
- return -ENOMEM;
-
-- /* map page for use */
-- phys_addr = dma_map_page(pp->dev->dev.parent, page, 0, PAGE_SIZE,
-- DMA_FROM_DEVICE);
-- if (unlikely(dma_mapping_error(pp->dev->dev.parent, phys_addr))) {
-- __free_page(page);
-- return -ENOMEM;
-- }
--
-- phys_addr += pp->rx_offset_correction;
-+ phys_addr = page_pool_get_dma_addr(page) + pp->rx_offset_correction;
-+ dma_dir = page_pool_get_dma_dir(rxq->page_pool);
-+ dma_sync_single_for_device(pp->dev->dev.parent, phys_addr,
-+ PAGE_SIZE, dma_dir);
- mvneta_rx_desc_fill(rx_desc, phys_addr, page, rxq);
-+
- return 0;
- }
-
-@@ -1907,10 +1910,12 @@ static void mvneta_rxq_drop_pkts(struct
- if (!data || !(rx_desc->buf_phys_addr))
- continue;
-
-- dma_unmap_page(pp->dev->dev.parent, rx_desc->buf_phys_addr,
-- PAGE_SIZE, DMA_FROM_DEVICE);
-- __free_page(data);
-+ page_pool_put_page(rxq->page_pool, data, false);
- }
-+ if (xdp_rxq_info_is_reg(&rxq->xdp_rxq))
-+ xdp_rxq_info_unreg(&rxq->xdp_rxq);
-+ page_pool_destroy(rxq->page_pool);
-+ rxq->page_pool = NULL;
- }
-
- static void
-@@ -2047,8 +2052,7 @@ static int mvneta_rx_swbm(struct napi_st
- skb_add_rx_frag(rxq->skb, frag_num, page,
- frag_offset, frag_size,
- PAGE_SIZE);
-- dma_unmap_page(dev->dev.parent, phys_addr,
-- PAGE_SIZE, DMA_FROM_DEVICE);
-+ page_pool_release_page(rxq->page_pool, page);
- rxq->left_size -= frag_size;
- }
- } else {
-@@ -2078,9 +2082,7 @@ static int mvneta_rx_swbm(struct napi_st
- frag_offset, frag_size,
- PAGE_SIZE);
-
-- dma_unmap_page(dev->dev.parent, phys_addr,
-- PAGE_SIZE, DMA_FROM_DEVICE);
--
-+ page_pool_release_page(rxq->page_pool, page);
- rxq->left_size -= frag_size;
- }
- } /* Middle or Last descriptor */
-@@ -2847,11 +2849,54 @@ static int mvneta_poll(struct napi_struc
- return rx_done;
- }
-
-+static int mvneta_create_page_pool(struct mvneta_port *pp,
-+ struct mvneta_rx_queue *rxq, int size)
-+{
-+ struct page_pool_params pp_params = {
-+ .order = 0,
-+ .flags = PP_FLAG_DMA_MAP,
-+ .pool_size = size,
-+ .nid = cpu_to_node(0),
-+ .dev = pp->dev->dev.parent,
-+ .dma_dir = DMA_FROM_DEVICE,
-+ };
-+ int err;
-+
-+ rxq->page_pool = page_pool_create(&pp_params);
-+ if (IS_ERR(rxq->page_pool)) {
-+ err = PTR_ERR(rxq->page_pool);
-+ rxq->page_pool = NULL;
-+ return err;
-+ }
-+
-+ err = xdp_rxq_info_reg(&rxq->xdp_rxq, pp->dev, rxq->id);
-+ if (err < 0)
-+ goto err_free_pp;
-+
-+ err = xdp_rxq_info_reg_mem_model(&rxq->xdp_rxq, MEM_TYPE_PAGE_POOL,
-+ rxq->page_pool);
-+ if (err)
-+ goto err_unregister_rxq;
-+
-+ return 0;
-+
-+err_unregister_rxq:
-+ xdp_rxq_info_unreg(&rxq->xdp_rxq);
-+err_free_pp:
-+ page_pool_destroy(rxq->page_pool);
-+ rxq->page_pool = NULL;
-+ return err;
-+}
-+
- /* Handle rxq fill: allocates rxq skbs; called when initializing a port */
- static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
- int num)
- {
-- int i;
-+ int i, err;
-+
-+ err = mvneta_create_page_pool(pp, rxq, num);
-+ if (err < 0)
-+ return err;
-
- for (i = 0; i < num; i++) {
- memset(rxq->descs + i, 0, sizeof(struct mvneta_rx_desc));
diff --git a/target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch b/target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch
deleted file mode 100644
index 6192f5f202..0000000000
--- a/target/linux/mvebu/patches-5.4/004-v5.5-arm64-dts-marvell-Add-AP807-quad-cache-description.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 30d53abdc60a6515f02f181e7c39b7b23d5fb3aa Mon Sep 17 00:00:00 2001
-From: Grzegorz Jaszczyk <jaz at semihalf.com>
-Date: Fri, 4 Oct 2019 16:27:27 +0200
-Subject: [PATCH] arm64: dts: marvell: Add AP807-quad cache description
-
-Adding appropriate entries to device-tree allows the cache description
-to show up in sysfs under: /sys/devices/system/cpu/cpuX/cache/.
-
-Signed-off-by: Grzegorz Jaszczyk <jaz at semihalf.com>
-Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- .../boot/dts/marvell/armada-ap807-quad.dtsi | 42 +++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
-@@ -22,6 +22,13 @@
- enable-method = "psci";
- #cooling-cells = <2>;
- clocks = <&cpu_clk 0>;
-+ i-cache-size = <0xc000>;
-+ i-cache-line-size = <64>;
-+ i-cache-sets = <256>;
-+ d-cache-size = <0x8000>;
-+ d-cache-line-size = <64>;
-+ d-cache-sets = <256>;
-+ next-level-cache = <&l2_0>;
- };
- cpu1: cpu at 1 {
- device_type = "cpu";
-@@ -30,6 +37,13 @@
- enable-method = "psci";
- #cooling-cells = <2>;
- clocks = <&cpu_clk 0>;
-+ i-cache-size = <0xc000>;
-+ i-cache-line-size = <64>;
-+ i-cache-sets = <256>;
-+ d-cache-size = <0x8000>;
-+ d-cache-line-size = <64>;
-+ d-cache-sets = <256>;
-+ next-level-cache = <&l2_0>;
- };
- cpu2: cpu at 100 {
- device_type = "cpu";
-@@ -38,6 +52,13 @@
- enable-method = "psci";
- #cooling-cells = <2>;
- clocks = <&cpu_clk 1>;
-+ i-cache-size = <0xc000>;
-+ i-cache-line-size = <64>;
-+ i-cache-sets = <256>;
-+ d-cache-size = <0x8000>;
-+ d-cache-line-size = <64>;
-+ d-cache-sets = <256>;
-+ next-level-cache = <&l2_1>;
- };
- cpu3: cpu at 101 {
- device_type = "cpu";
-@@ -46,6 +67,27 @@
- enable-method = "psci";
- #cooling-cells = <2>;
- clocks = <&cpu_clk 1>;
-+ i-cache-size = <0xc000>;
-+ i-cache-line-size = <64>;
-+ i-cache-sets = <256>;
-+ d-cache-size = <0x8000>;
-+ d-cache-line-size = <64>;
-+ d-cache-sets = <256>;
-+ next-level-cache = <&l2_1>;
-+ };
-+
-+ l2_0: l2-cache0 {
-+ compatible = "cache";
-+ cache-size = <0x80000>;
-+ cache-line-size = <64>;
-+ cache-sets = <512>;
-+ };
-+
-+ l2_1: l2-cache1 {
-+ compatible = "cache";
-+ cache-size = <0x80000>;
-+ cache-line-size = <64>;
-+ cache-sets = <512>;
- };
- };
- };
diff --git a/target/linux/mvebu/patches-5.4/005-net-mvneta-rely-on-build_skb-in-mvneta_rx_swbm-poll-.patch b/target/linux/mvebu/patches-5.4/005-net-mvneta-rely-on-build_skb-in-mvneta_rx_swbm-poll-.patch
deleted file mode 100644
index 869b22eefb..0000000000
--- a/target/linux/mvebu/patches-5.4/005-net-mvneta-rely-on-build_skb-in-mvneta_rx_swbm-poll-.patch
+++ /dev/null
@@ -1,303 +0,0 @@
-From 8dc9a0888f4c8e27b25e48ff1b4bc2b3a845cc2d Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo at kernel.org>
-Date: Sat, 19 Oct 2019 10:13:23 +0200
-Subject: [PATCH 3/7] net: mvneta: rely on build_skb in mvneta_rx_swbm poll
- routine
-
-Refactor mvneta_rx_swbm code introducing mvneta_swbm_rx_frame and
-mvneta_swbm_add_rx_fragment routines. Rely on build_skb in oreder to
-allocate skb since the previous patch introduced buffer recycling using
-the page_pool API.
-This patch fixes even an issue in the original driver where dma buffers
-are accessed before dma sync.
-mvneta driver can run on not cache coherent devices so it is
-necessary to sync DMA buffers before sending them to the device
-in order to avoid memory corruptions. Running perf analysis we can
-see a performance cost associated with this DMA-sync (anyway it is
-already there in the original driver code). In follow up patches we
-will add more logic to reduce DMA-sync as much as possible.
-
-Signed-off-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>
-Signed-off-by: Jesper Dangaard Brouer <brouer at redhat.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 185 +++++++++++++-------------
- 1 file changed, 95 insertions(+), 90 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -325,6 +325,11 @@
- ETH_HLEN + ETH_FCS_LEN, \
- cache_line_size())
-
-+#define MVNETA_SKB_PAD (SKB_DATA_ALIGN(sizeof(struct skb_shared_info) + \
-+ NET_SKB_PAD))
-+#define MVNETA_SKB_SIZE(len) (SKB_DATA_ALIGN(len) + MVNETA_SKB_PAD)
-+#define MVNETA_MAX_RX_BUF_SIZE (PAGE_SIZE - MVNETA_SKB_PAD)
-+
- #define IS_TSO_HEADER(txq, addr) \
- ((addr >= txq->tso_hdrs_phys) && \
- (addr < txq->tso_hdrs_phys + txq->size * TSO_HEADER_SIZE))
-@@ -650,7 +655,6 @@ static int txq_number = 8;
- static int rxq_def;
-
- static int rx_copybreak __read_mostly = 256;
--static int rx_header_size __read_mostly = 128;
-
- /* HW BM need that each port be identify by a unique ID */
- static int global_port_id;
-@@ -1842,7 +1846,7 @@ static int mvneta_rx_refill(struct mvnet
- phys_addr = page_pool_get_dma_addr(page) + pp->rx_offset_correction;
- dma_dir = page_pool_get_dma_dir(rxq->page_pool);
- dma_sync_single_for_device(pp->dev->dev.parent, phys_addr,
-- PAGE_SIZE, dma_dir);
-+ MVNETA_MAX_RX_BUF_SIZE, dma_dir);
- mvneta_rx_desc_fill(rx_desc, phys_addr, page, rxq);
-
- return 0;
-@@ -1960,30 +1964,102 @@ int mvneta_rx_refill_queue(struct mvneta
- return i;
- }
-
-+static int
-+mvneta_swbm_rx_frame(struct mvneta_port *pp,
-+ struct mvneta_rx_desc *rx_desc,
-+ struct mvneta_rx_queue *rxq,
-+ struct page *page)
-+{
-+ unsigned char *data = page_address(page);
-+ int data_len = -MVNETA_MH_SIZE, len;
-+ struct net_device *dev = pp->dev;
-+ enum dma_data_direction dma_dir;
-+
-+ if (MVNETA_SKB_SIZE(rx_desc->data_size) > PAGE_SIZE) {
-+ len = MVNETA_MAX_RX_BUF_SIZE;
-+ data_len += len;
-+ } else {
-+ len = rx_desc->data_size;
-+ data_len += len - ETH_FCS_LEN;
-+ }
-+
-+ dma_dir = page_pool_get_dma_dir(rxq->page_pool);
-+ dma_sync_single_for_cpu(dev->dev.parent,
-+ rx_desc->buf_phys_addr,
-+ len, dma_dir);
-+
-+ rxq->skb = build_skb(data, PAGE_SIZE);
-+ if (unlikely(!rxq->skb)) {
-+ netdev_err(dev,
-+ "Can't allocate skb on queue %d\n",
-+ rxq->id);
-+ dev->stats.rx_dropped++;
-+ rxq->skb_alloc_err++;
-+ return -ENOMEM;
-+ }
-+ page_pool_release_page(rxq->page_pool, page);
-+
-+ skb_reserve(rxq->skb, MVNETA_MH_SIZE + NET_SKB_PAD);
-+ skb_put(rxq->skb, data_len);
-+ mvneta_rx_csum(pp, rx_desc->status, rxq->skb);
-+
-+ rxq->left_size = rx_desc->data_size - len;
-+ rx_desc->buf_phys_addr = 0;
-+
-+ return 0;
-+}
-+
-+static void
-+mvneta_swbm_add_rx_fragment(struct mvneta_port *pp,
-+ struct mvneta_rx_desc *rx_desc,
-+ struct mvneta_rx_queue *rxq,
-+ struct page *page)
-+{
-+ struct net_device *dev = pp->dev;
-+ enum dma_data_direction dma_dir;
-+ int data_len, len;
-+
-+ if (rxq->left_size > MVNETA_MAX_RX_BUF_SIZE) {
-+ len = MVNETA_MAX_RX_BUF_SIZE;
-+ data_len = len;
-+ } else {
-+ len = rxq->left_size;
-+ data_len = len - ETH_FCS_LEN;
-+ }
-+ dma_dir = page_pool_get_dma_dir(rxq->page_pool);
-+ dma_sync_single_for_cpu(dev->dev.parent,
-+ rx_desc->buf_phys_addr,
-+ len, dma_dir);
-+ if (data_len > 0) {
-+ /* refill descriptor with new buffer later */
-+ skb_add_rx_frag(rxq->skb,
-+ skb_shinfo(rxq->skb)->nr_frags,
-+ page, NET_SKB_PAD, data_len,
-+ PAGE_SIZE);
-+ }
-+ page_pool_release_page(rxq->page_pool, page);
-+ rx_desc->buf_phys_addr = 0;
-+ rxq->left_size -= len;
-+}
-+
- /* Main rx processing when using software buffer management */
- static int mvneta_rx_swbm(struct napi_struct *napi,
- struct mvneta_port *pp, int budget,
- struct mvneta_rx_queue *rxq)
- {
-+ int rcvd_pkts = 0, rcvd_bytes = 0, rx_proc = 0;
- struct net_device *dev = pp->dev;
-- int rx_todo, rx_proc;
-- int refill = 0;
-- u32 rcvd_pkts = 0;
-- u32 rcvd_bytes = 0;
-+ int rx_todo, refill;
-
- /* Get number of received packets */
- rx_todo = mvneta_rxq_busy_desc_num_get(pp, rxq);
-- rx_proc = 0;
-
- /* Fairness NAPI loop */
-- while ((rcvd_pkts < budget) && (rx_proc < rx_todo)) {
-+ while (rx_proc < budget && rx_proc < rx_todo) {
- struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq);
-+ u32 rx_status, index;
- unsigned char *data;
- struct page *page;
-- dma_addr_t phys_addr;
-- u32 rx_status, index;
-- int rx_bytes, skb_size, copy_size;
-- int frag_num, frag_size, frag_offset;
-
- index = rx_desc - rxq->descs;
- page = (struct page *)rxq->buf_virt_addr[index];
-@@ -1991,100 +2067,30 @@ static int mvneta_rx_swbm(struct napi_st
- /* Prefetch header */
- prefetch(data);
-
-- phys_addr = rx_desc->buf_phys_addr;
- rx_status = rx_desc->status;
- rx_proc++;
- rxq->refill_num++;
-
- if (rx_status & MVNETA_RXD_FIRST_DESC) {
-+ int err;
-+
- /* Check errors only for FIRST descriptor */
- if (rx_status & MVNETA_RXD_ERR_SUMMARY) {
- mvneta_rx_error(pp, rx_desc);
- /* leave the descriptor untouched */
- continue;
- }
-- rx_bytes = rx_desc->data_size -
-- (ETH_FCS_LEN + MVNETA_MH_SIZE);
--
-- /* Allocate small skb for each new packet */
-- skb_size = max(rx_copybreak, rx_header_size);
-- rxq->skb = netdev_alloc_skb_ip_align(dev, skb_size);
-- if (unlikely(!rxq->skb)) {
-- struct mvneta_pcpu_stats *stats = this_cpu_ptr(pp->stats);
--
-- netdev_err(dev,
-- "Can't allocate skb on queue %d\n",
-- rxq->id);
--
-- rxq->skb_alloc_err++;
-
-- u64_stats_update_begin(&stats->syncp);
-- stats->rx_dropped++;
-- u64_stats_update_end(&stats->syncp);
-+ err = mvneta_swbm_rx_frame(pp, rx_desc, rxq, page);
-+ if (err)
- continue;
-- }
-- copy_size = min(skb_size, rx_bytes);
--
-- /* Copy data from buffer to SKB, skip Marvell header */
-- memcpy(rxq->skb->data, data + MVNETA_MH_SIZE,
-- copy_size);
-- skb_put(rxq->skb, copy_size);
-- rxq->left_size = rx_bytes - copy_size;
--
-- mvneta_rx_csum(pp, rx_status, rxq->skb);
-- if (rxq->left_size == 0) {
-- int size = copy_size + MVNETA_MH_SIZE;
--
-- dma_sync_single_range_for_cpu(dev->dev.parent,
-- phys_addr, 0,
-- size,
-- DMA_FROM_DEVICE);
--
-- /* leave the descriptor and buffer untouched */
-- } else {
-- /* refill descriptor with new buffer later */
-- rx_desc->buf_phys_addr = 0;
--
-- frag_num = 0;
-- frag_offset = copy_size + MVNETA_MH_SIZE;
-- frag_size = min(rxq->left_size,
-- (int)(PAGE_SIZE - frag_offset));
-- skb_add_rx_frag(rxq->skb, frag_num, page,
-- frag_offset, frag_size,
-- PAGE_SIZE);
-- page_pool_release_page(rxq->page_pool, page);
-- rxq->left_size -= frag_size;
-- }
- } else {
-- /* Middle or Last descriptor */
- if (unlikely(!rxq->skb)) {
- pr_debug("no skb for rx_status 0x%x\n",
- rx_status);
- continue;
- }
-- if (!rxq->left_size) {
-- /* last descriptor has only FCS */
-- /* and can be discarded */
-- dma_sync_single_range_for_cpu(dev->dev.parent,
-- phys_addr, 0,
-- ETH_FCS_LEN,
-- DMA_FROM_DEVICE);
-- /* leave the descriptor and buffer untouched */
-- } else {
-- /* refill descriptor with new buffer later */
-- rx_desc->buf_phys_addr = 0;
--
-- frag_num = skb_shinfo(rxq->skb)->nr_frags;
-- frag_offset = 0;
-- frag_size = min(rxq->left_size,
-- (int)(PAGE_SIZE - frag_offset));
-- skb_add_rx_frag(rxq->skb, frag_num, page,
-- frag_offset, frag_size,
-- PAGE_SIZE);
--
-- page_pool_release_page(rxq->page_pool, page);
-- rxq->left_size -= frag_size;
-- }
-+ mvneta_swbm_add_rx_fragment(pp, rx_desc, rxq, page);
- } /* Middle or Last descriptor */
-
- if (!(rx_status & MVNETA_RXD_LAST_DESC))
-@@ -2109,7 +2115,6 @@ static int mvneta_rx_swbm(struct napi_st
-
- /* clean uncomplete skb pointer in queue */
- rxq->skb = NULL;
-- rxq->left_size = 0;
- }
-
- if (rcvd_pkts)
-@@ -2970,7 +2975,7 @@ static void mvneta_rxq_hw_init(struct mv
- /* Set Offset */
- mvneta_rxq_offset_set(pp, rxq, 0);
- mvneta_rxq_buf_size_set(pp, rxq, PAGE_SIZE < SZ_64K ?
-- PAGE_SIZE :
-+ MVNETA_MAX_RX_BUF_SIZE :
- MVNETA_RX_BUF_SIZE(pp->pkt_size));
- mvneta_rxq_bm_disable(pp, rxq);
- mvneta_rxq_fill(pp, rxq, rxq->size);
-@@ -4713,7 +4718,7 @@ static int mvneta_probe(struct platform_
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- pp->id = global_port_id++;
-- pp->rx_offset_correction = 0; /* not relevant for SW BM */
-+ pp->rx_offset_correction = NET_SKB_PAD;
-
- /* Obtain access to BM resources if enabled and already initialized */
- bm_node = of_parse_phandle(dn, "buffer-manager", 0);
diff --git a/target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch b/target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch
deleted file mode 100644
index e06928d130..0000000000
--- a/target/linux/mvebu/patches-5.4/005-v5.5-arm64-dts-marvell-Drop-PCIe-I-O-ranges-from-CP11x-fi.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From 1399672e48b573f6526b9ac78cfd50314f0b01a6 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal at bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:30 +0200
-Subject: [PATCH] arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file
-
-As an example, Armada 70x0 and 80x0 SoC 0xf9000000 region points to
-RUNIT/SPICS0 while it is referenced in the DT as PCIe I/O memory
-range. This shows that I/O memory has never been used/working on the
-old SoCs despite the region being advertised. As PCIe I/O ranges will
-not be supported in newer SoCs using CP11x co-processors, let's
-simply drop them. It is not harmful in any case as PCIe device drivers
-can do it all with the regular mapped memory anyway.
-
-Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 2 --
- .../boot/dts/marvell/armada-8040-mcbin.dtsi | 3 +--
- arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 4 ----
- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 16 +++-------------
- 4 files changed, 4 insertions(+), 21 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
-@@ -19,7 +19,6 @@
- */
- #define CP11X_NAME cp0
- #define CP11X_BASE f2000000
--#define CP11X_PCIE_IO_BASE 0xf9000000
- #define CP11X_PCIE_MEM_BASE 0xf6000000
- #define CP11X_PCIE0_BASE f2600000
- #define CP11X_PCIE1_BASE f2620000
-@@ -29,7 +28,6 @@
-
- #undef CP11X_NAME
- #undef CP11X_BASE
--#undef CP11X_PCIE_IO_BASE
- #undef CP11X_PCIE_MEM_BASE
- #undef CP11X_PCIE0_BASE
- #undef CP11X_PCIE1_BASE
---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
-@@ -179,8 +179,7 @@
- num-lanes = <4>;
- num-viewport = <8>;
- reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
-- ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000
-- 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
-+ ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
- phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
- <&cp0_comphy2 0>, <&cp0_comphy3 0>;
- phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",
---- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
-@@ -21,7 +21,6 @@
- */
- #define CP11X_NAME cp0
- #define CP11X_BASE f2000000
--#define CP11X_PCIE_IO_BASE 0xf9000000
- #define CP11X_PCIE_MEM_BASE 0xf6000000
- #define CP11X_PCIE0_BASE f2600000
- #define CP11X_PCIE1_BASE f2620000
-@@ -31,7 +30,6 @@
-
- #undef CP11X_NAME
- #undef CP11X_BASE
--#undef CP11X_PCIE_IO_BASE
- #undef CP11X_PCIE_MEM_BASE
- #undef CP11X_PCIE0_BASE
- #undef CP11X_PCIE1_BASE
-@@ -42,7 +40,6 @@
- */
- #define CP11X_NAME cp1
- #define CP11X_BASE f4000000
--#define CP11X_PCIE_IO_BASE 0xfd000000
- #define CP11X_PCIE_MEM_BASE 0xfa000000
- #define CP11X_PCIE0_BASE f4600000
- #define CP11X_PCIE1_BASE f4620000
-@@ -52,7 +49,6 @@
-
- #undef CP11X_NAME
- #undef CP11X_BASE
--#undef CP11X_PCIE_IO_BASE
- #undef CP11X_PCIE_MEM_BASE
- #undef CP11X_PCIE0_BASE
- #undef CP11X_PCIE1_BASE
---- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
-@@ -10,7 +10,6 @@
-
- #include "armada-common.dtsi"
-
--#define CP11X_PCIEx_IO_BASE(iface) (CP11X_PCIE_IO_BASE + (iface * 0x10000))
- #define CP11X_PCIEx_MEM_BASE(iface) (CP11X_PCIE_MEM_BASE + (iface * 0x1000000))
- #define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
-
-@@ -507,11 +506,8 @@
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
-- ranges =
-- /* downstream I/O */
-- <0x81000000 0 CP11X_PCIEx_IO_BASE(0) 0 CP11X_PCIEx_IO_BASE(0) 0 0x10000
- /* non-prefetchable memory */
-- 0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
-+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-@@ -534,11 +530,8 @@
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
-- ranges =
-- /* downstream I/O */
-- <0x81000000 0 CP11X_PCIEx_IO_BASE(1) 0 CP11X_PCIEx_IO_BASE(1) 0 0x10000
- /* non-prefetchable memory */
-- 0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
-+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
-@@ -562,11 +555,8 @@
- msi-parent = <&gic_v2m0>;
-
- bus-range = <0 0xff>;
-- ranges =
-- /* downstream I/O */
-- <0x81000000 0 CP11X_PCIEx_IO_BASE(2) 0 CP11X_PCIEx_IO_BASE(2) 0 0x10000
- /* non-prefetchable memory */
-- 0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
-+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/target/linux/mvebu/patches-5.4/006-net-mvneta-add-basic-XDP-support.patch b/target/linux/mvebu/patches-5.4/006-net-mvneta-add-basic-XDP-support.patch
deleted file mode 100644
index 33a7a27f43..0000000000
--- a/target/linux/mvebu/patches-5.4/006-net-mvneta-add-basic-XDP-support.patch
+++ /dev/null
@@ -1,311 +0,0 @@
-From 0db51da7a8e99f0803ec3a8e25c1a66234a219cb Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo at kernel.org>
-Date: Sat, 19 Oct 2019 10:13:24 +0200
-Subject: [PATCH 4/7] net: mvneta: add basic XDP support
-
-Add basic XDP support to mvneta driver for devices that rely on software
-buffer management. Currently supported verdicts are:
-- XDP_DROP
-- XDP_PASS
-- XDP_REDIRECT
-- XDP_ABORTED
-
-- iptables drop:
-$iptables -t raw -I PREROUTING -p udp --dport 9 -j DROP
-$nstat -n && sleep 1 && nstat
-IpInReceives 151169 0.0
-IpExtInOctets 6953544 0.0
-IpExtInNoECTPkts 151165 0.0
-
-- XDP_DROP via xdp1
-$./samples/bpf/xdp1 3
-proto 0: 421419 pkt/s
-proto 0: 421444 pkt/s
-proto 0: 421393 pkt/s
-proto 0: 421440 pkt/s
-proto 0: 421184 pkt/s
-
-Tested-by: Matteo Croce <mcroce at redhat.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 148 ++++++++++++++++++++++++--
- 1 file changed, 139 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -38,6 +38,7 @@
- #include <net/ipv6.h>
- #include <net/tso.h>
- #include <net/page_pool.h>
-+#include <linux/bpf_trace.h>
-
- /* Registers */
- #define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2))
-@@ -325,8 +326,10 @@
- ETH_HLEN + ETH_FCS_LEN, \
- cache_line_size())
-
-+#define MVNETA_SKB_HEADROOM (max(XDP_PACKET_HEADROOM, NET_SKB_PAD) + \
-+ NET_IP_ALIGN)
- #define MVNETA_SKB_PAD (SKB_DATA_ALIGN(sizeof(struct skb_shared_info) + \
-- NET_SKB_PAD))
-+ MVNETA_SKB_HEADROOM))
- #define MVNETA_SKB_SIZE(len) (SKB_DATA_ALIGN(len) + MVNETA_SKB_PAD)
- #define MVNETA_MAX_RX_BUF_SIZE (PAGE_SIZE - MVNETA_SKB_PAD)
-
-@@ -354,6 +357,11 @@ struct mvneta_statistic {
- #define T_REG_64 64
- #define T_SW 1
-
-+#define MVNETA_XDP_PASS BIT(0)
-+#define MVNETA_XDP_DROPPED BIT(1)
-+#define MVNETA_XDP_TX BIT(2)
-+#define MVNETA_XDP_REDIR BIT(3)
-+
- static const struct mvneta_statistic mvneta_statistics[] = {
- { 0x3000, T_REG_64, "good_octets_received", },
- { 0x3010, T_REG_32, "good_frames_received", },
-@@ -435,6 +443,8 @@ struct mvneta_port {
- u32 cause_rx_tx;
- struct napi_struct napi;
-
-+ struct bpf_prog *xdp_prog;
-+
- /* Core clock */
- struct clk *clk;
- /* AXI clock */
-@@ -1965,10 +1975,50 @@ int mvneta_rx_refill_queue(struct mvneta
- }
-
- static int
-+mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
-+ struct bpf_prog *prog, struct xdp_buff *xdp)
-+{
-+ u32 ret, act = bpf_prog_run_xdp(prog, xdp);
-+
-+ switch (act) {
-+ case XDP_PASS:
-+ ret = MVNETA_XDP_PASS;
-+ break;
-+ case XDP_REDIRECT: {
-+ int err;
-+
-+ err = xdp_do_redirect(pp->dev, xdp, prog);
-+ if (err) {
-+ ret = MVNETA_XDP_DROPPED;
-+ xdp_return_buff(xdp);
-+ } else {
-+ ret = MVNETA_XDP_REDIR;
-+ }
-+ break;
-+ }
-+ default:
-+ bpf_warn_invalid_xdp_action(act);
-+ /* fall through */
-+ case XDP_ABORTED:
-+ trace_xdp_exception(pp->dev, prog, act);
-+ /* fall through */
-+ case XDP_DROP:
-+ page_pool_recycle_direct(rxq->page_pool,
-+ virt_to_head_page(xdp->data));
-+ ret = MVNETA_XDP_DROPPED;
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+static int
- mvneta_swbm_rx_frame(struct mvneta_port *pp,
- struct mvneta_rx_desc *rx_desc,
- struct mvneta_rx_queue *rxq,
-- struct page *page)
-+ struct xdp_buff *xdp,
-+ struct bpf_prog *xdp_prog,
-+ struct page *page, u32 *xdp_ret)
- {
- unsigned char *data = page_address(page);
- int data_len = -MVNETA_MH_SIZE, len;
-@@ -1988,7 +2038,26 @@ mvneta_swbm_rx_frame(struct mvneta_port
- rx_desc->buf_phys_addr,
- len, dma_dir);
-
-- rxq->skb = build_skb(data, PAGE_SIZE);
-+ xdp->data_hard_start = data;
-+ xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE;
-+ xdp->data_end = xdp->data + data_len;
-+ xdp_set_data_meta_invalid(xdp);
-+
-+ if (xdp_prog) {
-+ u32 ret;
-+
-+ ret = mvneta_run_xdp(pp, rxq, xdp_prog, xdp);
-+ if (ret != MVNETA_XDP_PASS) {
-+ mvneta_update_stats(pp, 1,
-+ xdp->data_end - xdp->data,
-+ false);
-+ rx_desc->buf_phys_addr = 0;
-+ *xdp_ret |= ret;
-+ return ret;
-+ }
-+ }
-+
-+ rxq->skb = build_skb(xdp->data_hard_start, PAGE_SIZE);
- if (unlikely(!rxq->skb)) {
- netdev_err(dev,
- "Can't allocate skb on queue %d\n",
-@@ -1999,8 +2068,9 @@ mvneta_swbm_rx_frame(struct mvneta_port
- }
- page_pool_release_page(rxq->page_pool, page);
-
-- skb_reserve(rxq->skb, MVNETA_MH_SIZE + NET_SKB_PAD);
-- skb_put(rxq->skb, data_len);
-+ skb_reserve(rxq->skb,
-+ xdp->data - xdp->data_hard_start);
-+ skb_put(rxq->skb, xdp->data_end - xdp->data);
- mvneta_rx_csum(pp, rx_desc->status, rxq->skb);
-
- rxq->left_size = rx_desc->data_size - len;
-@@ -2034,7 +2104,7 @@ mvneta_swbm_add_rx_fragment(struct mvnet
- /* refill descriptor with new buffer later */
- skb_add_rx_frag(rxq->skb,
- skb_shinfo(rxq->skb)->nr_frags,
-- page, NET_SKB_PAD, data_len,
-+ page, MVNETA_SKB_HEADROOM, data_len,
- PAGE_SIZE);
- }
- page_pool_release_page(rxq->page_pool, page);
-@@ -2049,11 +2119,18 @@ static int mvneta_rx_swbm(struct napi_st
- {
- int rcvd_pkts = 0, rcvd_bytes = 0, rx_proc = 0;
- struct net_device *dev = pp->dev;
-+ struct bpf_prog *xdp_prog;
-+ struct xdp_buff xdp_buf;
- int rx_todo, refill;
-+ u32 xdp_ret = 0;
-
- /* Get number of received packets */
- rx_todo = mvneta_rxq_busy_desc_num_get(pp, rxq);
-
-+ rcu_read_lock();
-+ xdp_prog = READ_ONCE(pp->xdp_prog);
-+ xdp_buf.rxq = &rxq->xdp_rxq;
-+
- /* Fairness NAPI loop */
- while (rx_proc < budget && rx_proc < rx_todo) {
- struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq);
-@@ -2081,7 +2158,8 @@ static int mvneta_rx_swbm(struct napi_st
- continue;
- }
-
-- err = mvneta_swbm_rx_frame(pp, rx_desc, rxq, page);
-+ err = mvneta_swbm_rx_frame(pp, rx_desc, rxq, &xdp_buf,
-+ xdp_prog, page, &xdp_ret);
- if (err)
- continue;
- } else {
-@@ -2116,6 +2194,10 @@ static int mvneta_rx_swbm(struct napi_st
- /* clean uncomplete skb pointer in queue */
- rxq->skb = NULL;
- }
-+ rcu_read_unlock();
-+
-+ if (xdp_ret & MVNETA_XDP_REDIR)
-+ xdp_do_flush_map();
-
- if (rcvd_pkts)
- mvneta_update_stats(pp, rcvd_pkts, rcvd_bytes, false);
-@@ -2857,13 +2939,14 @@ static int mvneta_poll(struct napi_struc
- static int mvneta_create_page_pool(struct mvneta_port *pp,
- struct mvneta_rx_queue *rxq, int size)
- {
-+ struct bpf_prog *xdp_prog = READ_ONCE(pp->xdp_prog);
- struct page_pool_params pp_params = {
- .order = 0,
- .flags = PP_FLAG_DMA_MAP,
- .pool_size = size,
- .nid = cpu_to_node(0),
- .dev = pp->dev->dev.parent,
-- .dma_dir = DMA_FROM_DEVICE,
-+ .dma_dir = xdp_prog ? DMA_BIDIRECTIONAL : DMA_FROM_DEVICE,
- };
- int err;
-
-@@ -3366,6 +3449,11 @@ static int mvneta_change_mtu(struct net_
- mtu = ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8);
- }
-
-+ if (pp->xdp_prog && mtu > MVNETA_MAX_RX_BUF_SIZE) {
-+ netdev_info(dev, "Illegal MTU value %d for XDP mode\n", mtu);
-+ return -EINVAL;
-+ }
-+
- dev->mtu = mtu;
-
- if (!netif_running(dev)) {
-@@ -4036,6 +4124,47 @@ static int mvneta_ioctl(struct net_devic
- return phylink_mii_ioctl(pp->phylink, ifr, cmd);
- }
-
-+static int mvneta_xdp_setup(struct net_device *dev, struct bpf_prog *prog,
-+ struct netlink_ext_ack *extack)
-+{
-+ bool need_update, running = netif_running(dev);
-+ struct mvneta_port *pp = netdev_priv(dev);
-+ struct bpf_prog *old_prog;
-+
-+ if (prog && dev->mtu > MVNETA_MAX_RX_BUF_SIZE) {
-+ NL_SET_ERR_MSG_MOD(extack, "Jumbo frames not supported on XDP");
-+ return -EOPNOTSUPP;
-+ }
-+
-+ need_update = !!pp->xdp_prog != !!prog;
-+ if (running && need_update)
-+ mvneta_stop(dev);
-+
-+ old_prog = xchg(&pp->xdp_prog, prog);
-+ if (old_prog)
-+ bpf_prog_put(old_prog);
-+
-+ if (running && need_update)
-+ return mvneta_open(dev);
-+
-+ return 0;
-+}
-+
-+static int mvneta_xdp(struct net_device *dev, struct netdev_bpf *xdp)
-+{
-+ struct mvneta_port *pp = netdev_priv(dev);
-+
-+ switch (xdp->command) {
-+ case XDP_SETUP_PROG:
-+ return mvneta_xdp_setup(dev, xdp->prog, xdp->extack);
-+ case XDP_QUERY_PROG:
-+ xdp->prog_id = pp->xdp_prog ? pp->xdp_prog->aux->id : 0;
-+ return 0;
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
- /* Ethtool methods */
-
- /* Set link ksettings (phy address, speed) for ethtools */
-@@ -4432,6 +4561,7 @@ static const struct net_device_ops mvnet
- .ndo_fix_features = mvneta_fix_features,
- .ndo_get_stats64 = mvneta_get_stats64,
- .ndo_do_ioctl = mvneta_ioctl,
-+ .ndo_bpf = mvneta_xdp,
- };
-
- static const struct ethtool_ops mvneta_eth_tool_ops = {
-@@ -4718,7 +4848,7 @@ static int mvneta_probe(struct platform_
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- pp->id = global_port_id++;
-- pp->rx_offset_correction = NET_SKB_PAD;
-+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
-
- /* Obtain access to BM resources if enabled and already initialized */
- bm_node = of_parse_phandle(dn, "buffer-manager", 0);
diff --git a/target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch b/target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch
deleted file mode 100644
index 0dd9e8f90f..0000000000
--- a/target/linux/mvebu/patches-5.4/006-v5.5-arm64-dts-marvell-Externalize-PCIe-macros-from-CP11x.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From 5f07b26e85dc86f017833ea745ff4e5b420280cd Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal at bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:31 +0200
-Subject: [PATCH] arm64: dts: marvell: Externalize PCIe macros from CP11x file
-
-PCIe macros are specific to CP110 and will not fit CP115
-constraints. To keep the same way the files are organized, just move
-some macros out of the CP11x generic file and define them directly in
-SoC DTSI, instead of defining single addresses in the SoC DTSI and
-reusing them in macros.
-
-In the end:
-* CP11X_PCIE_MEM_BASE SoC define is dropped
-* CP11X_PCIEx_MEM_BASE is moved out of the generic DT to be put in the
- SoC files as it replaces the above definition.
-* As the CP11X_PCIEx_MEM_SIZE macro is also subject to change with
- newer SoCs, we put it in the SoC files as well.
-
-Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 6 ++++--
- arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 12 ++++++++----
- arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 9 ++++-----
- 3 files changed, 16 insertions(+), 11 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
-@@ -19,7 +19,8 @@
- */
- #define CP11X_NAME cp0
- #define CP11X_BASE f2000000
--#define CP11X_PCIE_MEM_BASE 0xf6000000
-+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
-+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
- #define CP11X_PCIE0_BASE f2600000
- #define CP11X_PCIE1_BASE f2620000
- #define CP11X_PCIE2_BASE f2640000
-@@ -28,7 +29,8 @@
-
- #undef CP11X_NAME
- #undef CP11X_BASE
--#undef CP11X_PCIE_MEM_BASE
-+#undef CP11X_PCIEx_MEM_BASE
-+#undef CP11X_PCIEx_MEM_SIZE
- #undef CP11X_PCIE0_BASE
- #undef CP11X_PCIE1_BASE
- #undef CP11X_PCIE2_BASE
---- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
-@@ -21,7 +21,8 @@
- */
- #define CP11X_NAME cp0
- #define CP11X_BASE f2000000
--#define CP11X_PCIE_MEM_BASE 0xf6000000
-+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
-+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
- #define CP11X_PCIE0_BASE f2600000
- #define CP11X_PCIE1_BASE f2620000
- #define CP11X_PCIE2_BASE f2640000
-@@ -30,7 +31,8 @@
-
- #undef CP11X_NAME
- #undef CP11X_BASE
--#undef CP11X_PCIE_MEM_BASE
-+#undef CP11X_PCIEx_MEM_BASE
-+#undef CP11X_PCIEx_MEM_SIZE
- #undef CP11X_PCIE0_BASE
- #undef CP11X_PCIE1_BASE
- #undef CP11X_PCIE2_BASE
-@@ -40,7 +42,8 @@
- */
- #define CP11X_NAME cp1
- #define CP11X_BASE f4000000
--#define CP11X_PCIE_MEM_BASE 0xfa000000
-+#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000))
-+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
- #define CP11X_PCIE0_BASE f4600000
- #define CP11X_PCIE1_BASE f4620000
- #define CP11X_PCIE2_BASE f4640000
-@@ -49,7 +52,8 @@
-
- #undef CP11X_NAME
- #undef CP11X_BASE
--#undef CP11X_PCIE_MEM_BASE
-+#undef CP11X_PCIEx_MEM_BASE
-+#undef CP11X_PCIEx_MEM_SIZE
- #undef CP11X_PCIE0_BASE
- #undef CP11X_PCIE1_BASE
- #undef CP11X_PCIE2_BASE
---- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
-@@ -10,8 +10,7 @@
-
- #include "armada-common.dtsi"
-
--#define CP11X_PCIEx_MEM_BASE(iface) (CP11X_PCIE_MEM_BASE + (iface * 0x1000000))
--#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + 0xf00000)
-+#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface))
-
- / {
- /*
-@@ -507,7 +506,7 @@
-
- bus-range = <0 0xff>;
- /* non-prefetchable memory */
-- ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 0xf00000>;
-+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-@@ -531,7 +530,7 @@
-
- bus-range = <0 0xff>;
- /* non-prefetchable memory */
-- ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 0xf00000>;
-+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
-@@ -556,7 +555,7 @@
-
- bus-range = <0 0xff>;
- /* non-prefetchable memory */
-- ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 0xf00000>;
-+ ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/target/linux/mvebu/patches-5.4/007-gpio-mvebu-avoid_error_message_for_optional_IRQ.patch b/target/linux/mvebu/patches-5.4/007-gpio-mvebu-avoid_error_message_for_optional_IRQ.patch
deleted file mode 100644
index 00d2b30d58..0000000000
--- a/target/linux/mvebu/patches-5.4/007-gpio-mvebu-avoid_error_message_for_optional_IRQ.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 525b0858ff2fdb78defec2d4d6d63baaa423d5fd Mon Sep 17 00:00:00 2001
-From: Chris Packham <chris.packham at alliedtelesis.co.nz>
-Date: Fri, 13 Mar 2020 16:42:44 +1300
-Subject: [PATCH] gpio: mvebu: avoid error message for optional IRQ
-
-platform_get_irq() will generate an error message if the requested irq
-is not present
-
- mvebu-gpio f1010140.gpio: IRQ index 3 not found
-
-use platform_get_irq_optional() to avoid the error message being
-generated.
-
-Signed-off-by: Chris Packham <chris.packham at alliedtelesis.co.nz>
-Acked-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
-Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
----
- drivers/gpio/gpio-mvebu.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/gpio/gpio-mvebu.c
-+++ b/drivers/gpio/gpio-mvebu.c
-@@ -1248,7 +1248,7 @@ static int mvebu_gpio_probe(struct platf
- * pins.
- */
- for (i = 0; i < 4; i++) {
-- int irq = platform_get_irq(pdev, i);
-+ int irq = platform_get_irq_optional(pdev, i);
-
- if (irq < 0)
- continue;
diff --git a/target/linux/mvebu/patches-5.4/007-net-mvneta-move-header-prefetch-in-mvneta_swbm_rx_fr.patch b/target/linux/mvebu/patches-5.4/007-net-mvneta-move-header-prefetch-in-mvneta_swbm_rx_fr.patch
deleted file mode 100644
index e075796e41..0000000000
--- a/target/linux/mvebu/patches-5.4/007-net-mvneta-move-header-prefetch-in-mvneta_swbm_rx_fr.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From fa383f6b77a2ed788266fa8fbfb659aa284d2f58 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo at kernel.org>
-Date: Sat, 19 Oct 2019 10:13:25 +0200
-Subject: [PATCH 5/7] net: mvneta: move header prefetch in mvneta_swbm_rx_frame
-
-Move data buffer prefetch in mvneta_swbm_rx_frame after
-dma_sync_single_range_for_cpu
-
-Signed-off-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>
-Signed-off-by: Jesper Dangaard Brouer <brouer at redhat.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -2038,6 +2038,9 @@ mvneta_swbm_rx_frame(struct mvneta_port
- rx_desc->buf_phys_addr,
- len, dma_dir);
-
-+ /* Prefetch header */
-+ prefetch(data);
-+
- xdp->data_hard_start = data;
- xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE;
- xdp->data_end = xdp->data + data_len;
-@@ -2135,14 +2138,10 @@ static int mvneta_rx_swbm(struct napi_st
- while (rx_proc < budget && rx_proc < rx_todo) {
- struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq);
- u32 rx_status, index;
-- unsigned char *data;
- struct page *page;
-
- index = rx_desc - rxq->descs;
- page = (struct page *)rxq->buf_virt_addr[index];
-- data = page_address(page);
-- /* Prefetch header */
-- prefetch(data);
-
- rx_status = rx_desc->status;
- rx_proc++;
diff --git a/target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch b/target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch
deleted file mode 100644
index c191b3f7df..0000000000
--- a/target/linux/mvebu/patches-5.4/007-v5.5-arm64-dts-marvell-Enumerate-the-first-AP806-syscon.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 2d6ebaa98be1dd265aa6d99a00c150f1f9f2ea66 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal at bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:18 +0200
-Subject: [PATCH] arm64: dts: marvell: Enumerate the first AP806 syscon
-
-There are two system controllers in the AP80x, like for ap_syscon1,
-enumerate the first one by renaming it s/ap_syscon/ap_syscon0/.
-
-Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
-@@ -246,7 +246,7 @@
- status = "disabled";
- };
-
-- ap_syscon: system-controller at 6f4000 {
-+ ap_syscon0: system-controller at 6f4000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x6f4000 0x2000>;
-
diff --git a/target/linux/mvebu/patches-5.4/008-net-mvneta-make-tx-buffer-array-agnostic.patch b/target/linux/mvebu/patches-5.4/008-net-mvneta-make-tx-buffer-array-agnostic.patch
deleted file mode 100644
index 4698c23be4..0000000000
--- a/target/linux/mvebu/patches-5.4/008-net-mvneta-make-tx-buffer-array-agnostic.patch
+++ /dev/null
@@ -1,210 +0,0 @@
-From 9e58c8b410650b5a6eb5b8fad8474bd8425a4023 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo at kernel.org>
-Date: Sat, 19 Oct 2019 10:13:26 +0200
-Subject: [PATCH 6/7] net: mvneta: make tx buffer array agnostic
-
-Allow tx buffer array to contain both skb and xdp buffers in order to
-enable xdp frame recycling adding XDP_TX verdict support
-
-Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 66 +++++++++++++++++----------
- 1 file changed, 43 insertions(+), 23 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -565,6 +565,20 @@ struct mvneta_rx_desc {
- };
- #endif
-
-+enum mvneta_tx_buf_type {
-+ MVNETA_TYPE_SKB,
-+ MVNETA_TYPE_XDP_TX,
-+ MVNETA_TYPE_XDP_NDO,
-+};
-+
-+struct mvneta_tx_buf {
-+ enum mvneta_tx_buf_type type;
-+ union {
-+ struct xdp_frame *xdpf;
-+ struct sk_buff *skb;
-+ };
-+};
-+
- struct mvneta_tx_queue {
- /* Number of this TX queue, in the range 0-7 */
- u8 id;
-@@ -580,8 +594,8 @@ struct mvneta_tx_queue {
- int tx_stop_threshold;
- int tx_wake_threshold;
-
-- /* Array of transmitted skb */
-- struct sk_buff **tx_skb;
-+ /* Array of transmitted buffers */
-+ struct mvneta_tx_buf *buf;
-
- /* Index of last TX DMA descriptor that was inserted */
- int txq_put_index;
-@@ -1793,14 +1807,9 @@ static void mvneta_txq_bufs_free(struct
- int i;
-
- for (i = 0; i < num; i++) {
-+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_get_index];
- struct mvneta_tx_desc *tx_desc = txq->descs +
- txq->txq_get_index;
-- struct sk_buff *skb = txq->tx_skb[txq->txq_get_index];
--
-- if (skb) {
-- bytes_compl += skb->len;
-- pkts_compl++;
-- }
-
- mvneta_txq_inc_get(txq);
-
-@@ -1808,9 +1817,12 @@ static void mvneta_txq_bufs_free(struct
- dma_unmap_single(pp->dev->dev.parent,
- tx_desc->buf_phys_addr,
- tx_desc->data_size, DMA_TO_DEVICE);
-- if (!skb)
-+ if (!buf->skb)
- continue;
-- dev_kfree_skb_any(skb);
-+
-+ bytes_compl += buf->skb->len;
-+ pkts_compl++;
-+ dev_kfree_skb_any(buf->skb);
- }
-
- netdev_tx_completed_queue(nq, pkts_compl, bytes_compl);
-@@ -2335,16 +2347,19 @@ static inline void
- mvneta_tso_put_hdr(struct sk_buff *skb,
- struct mvneta_port *pp, struct mvneta_tx_queue *txq)
- {
-- struct mvneta_tx_desc *tx_desc;
- int hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
-+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
-+ struct mvneta_tx_desc *tx_desc;
-
-- txq->tx_skb[txq->txq_put_index] = NULL;
- tx_desc = mvneta_txq_next_desc_get(txq);
- tx_desc->data_size = hdr_len;
- tx_desc->command = mvneta_skb_tx_csum(pp, skb);
- tx_desc->command |= MVNETA_TXD_F_DESC;
- tx_desc->buf_phys_addr = txq->tso_hdrs_phys +
- txq->txq_put_index * TSO_HEADER_SIZE;
-+ buf->type = MVNETA_TYPE_SKB;
-+ buf->skb = NULL;
-+
- mvneta_txq_inc_put(txq);
- }
-
-@@ -2353,6 +2368,7 @@ mvneta_tso_put_data(struct net_device *d
- struct sk_buff *skb, char *data, int size,
- bool last_tcp, bool is_last)
- {
-+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
- struct mvneta_tx_desc *tx_desc;
-
- tx_desc = mvneta_txq_next_desc_get(txq);
-@@ -2366,7 +2382,8 @@ mvneta_tso_put_data(struct net_device *d
- }
-
- tx_desc->command = 0;
-- txq->tx_skb[txq->txq_put_index] = NULL;
-+ buf->type = MVNETA_TYPE_SKB;
-+ buf->skb = NULL;
-
- if (last_tcp) {
- /* last descriptor in the TCP packet */
-@@ -2374,7 +2391,7 @@ mvneta_tso_put_data(struct net_device *d
-
- /* last descriptor in SKB */
- if (is_last)
-- txq->tx_skb[txq->txq_put_index] = skb;
-+ buf->skb = skb;
- }
- mvneta_txq_inc_put(txq);
- return 0;
-@@ -2459,6 +2476,7 @@ static int mvneta_tx_frag_process(struct
- int i, nr_frags = skb_shinfo(skb)->nr_frags;
-
- for (i = 0; i < nr_frags; i++) {
-+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
- skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- void *addr = skb_frag_address(frag);
-
-@@ -2478,12 +2496,13 @@ static int mvneta_tx_frag_process(struct
- if (i == nr_frags - 1) {
- /* Last descriptor */
- tx_desc->command = MVNETA_TXD_L_DESC | MVNETA_TXD_Z_PAD;
-- txq->tx_skb[txq->txq_put_index] = skb;
-+ buf->skb = skb;
- } else {
- /* Descriptor in the middle: Not First, Not Last */
- tx_desc->command = 0;
-- txq->tx_skb[txq->txq_put_index] = NULL;
-+ buf->skb = NULL;
- }
-+ buf->type = MVNETA_TYPE_SKB;
- mvneta_txq_inc_put(txq);
- }
-
-@@ -2511,6 +2530,7 @@ static netdev_tx_t mvneta_tx(struct sk_b
- struct mvneta_port *pp = netdev_priv(dev);
- u16 txq_id = skb_get_queue_mapping(skb);
- struct mvneta_tx_queue *txq = &pp->txqs[txq_id];
-+ struct mvneta_tx_buf *buf = &txq->buf[txq->txq_put_index];
- struct mvneta_tx_desc *tx_desc;
- int len = skb->len;
- int frags = 0;
-@@ -2543,16 +2563,17 @@ static netdev_tx_t mvneta_tx(struct sk_b
- goto out;
- }
-
-+ buf->type = MVNETA_TYPE_SKB;
- if (frags == 1) {
- /* First and Last descriptor */
- tx_cmd |= MVNETA_TXD_FLZ_DESC;
- tx_desc->command = tx_cmd;
-- txq->tx_skb[txq->txq_put_index] = skb;
-+ buf->skb = skb;
- mvneta_txq_inc_put(txq);
- } else {
- /* First but not Last */
- tx_cmd |= MVNETA_TXD_F_DESC;
-- txq->tx_skb[txq->txq_put_index] = NULL;
-+ buf->skb = NULL;
- mvneta_txq_inc_put(txq);
- tx_desc->command = tx_cmd;
- /* Continue with other skb fragments */
-@@ -3138,9 +3159,8 @@ static int mvneta_txq_sw_init(struct mvn
-
- txq->last_desc = txq->size - 1;
-
-- txq->tx_skb = kmalloc_array(txq->size, sizeof(*txq->tx_skb),
-- GFP_KERNEL);
-- if (!txq->tx_skb) {
-+ txq->buf = kmalloc_array(txq->size, sizeof(*txq->buf), GFP_KERNEL);
-+ if (!txq->buf) {
- dma_free_coherent(pp->dev->dev.parent,
- txq->size * MVNETA_DESC_ALIGNED_SIZE,
- txq->descs, txq->descs_phys);
-@@ -3152,7 +3172,7 @@ static int mvneta_txq_sw_init(struct mvn
- txq->size * TSO_HEADER_SIZE,
- &txq->tso_hdrs_phys, GFP_KERNEL);
- if (!txq->tso_hdrs) {
-- kfree(txq->tx_skb);
-+ kfree(txq->buf);
- dma_free_coherent(pp->dev->dev.parent,
- txq->size * MVNETA_DESC_ALIGNED_SIZE,
- txq->descs, txq->descs_phys);
-@@ -3207,7 +3227,7 @@ static void mvneta_txq_sw_deinit(struct
- {
- struct netdev_queue *nq = netdev_get_tx_queue(pp->dev, txq->id);
-
-- kfree(txq->tx_skb);
-+ kfree(txq->buf);
-
- if (txq->tso_hdrs)
- dma_free_coherent(pp->dev->dev.parent,
diff --git a/target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch b/target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch
deleted file mode 100644
index bb7863cb5f..0000000000
--- a/target/linux/mvebu/patches-5.4/008-v5.5-arm64-dts-marvell-Prepare-the-introduction-of-AP807-.patch
+++ /dev/null
@@ -1,937 +0,0 @@
-From 7409b155562cc19b929b57692b334c5758ffc75d Mon Sep 17 00:00:00 2001
-From: Konstantin Porotchkin <kostap at marvell.com>
-Date: Fri, 4 Oct 2019 16:27:22 +0200
-Subject: [PATCH] arm64: dts: marvell: Prepare the introduction of AP807 based
- SoCs
-
-Prepare the support for Marvell AP807 die. This die is very similar to
-AP806 but uses different DDR PHY. AP807 is a major component of CN9130
-SoC series.
-
-Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
-Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 448 +----------------
- arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 456 ++++++++++++++++++
- 2 files changed, 458 insertions(+), 446 deletions(-)
- create mode 100644 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
-
---- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
-@@ -5,454 +5,10 @@
- * Device Tree file for Marvell Armada AP806.
- */
-
--#include <dt-bindings/interrupt-controller/arm-gic.h>
--#include <dt-bindings/thermal/thermal.h>
--
--/dts-v1/;
-+#define AP_NAME ap806
-+#include "armada-ap80x.dtsi"
-
- / {
- model = "Marvell Armada AP806";
- compatible = "marvell,armada-ap806";
-- #address-cells = <2>;
-- #size-cells = <2>;
--
-- aliases {
-- serial0 = &uart0;
-- serial1 = &uart1;
-- gpio0 = &ap_gpio;
-- spi0 = &spi0;
-- };
--
-- psci {
-- compatible = "arm,psci-0.2";
-- method = "smc";
-- };
--
-- reserved-memory {
-- #address-cells = <2>;
-- #size-cells = <2>;
-- ranges;
--
-- /*
-- * This area matches the mapping done with a
-- * mainline U-Boot, and should be updated by the
-- * bootloader.
-- */
--
-- psci-area at 4000000 {
-- reg = <0x0 0x4000000 0x0 0x200000>;
-- no-map;
-- };
-- };
--
-- ap806 {
-- #address-cells = <2>;
-- #size-cells = <2>;
-- compatible = "simple-bus";
-- interrupt-parent = <&gic>;
-- ranges;
--
-- config-space at f0000000 {
-- #address-cells = <1>;
-- #size-cells = <1>;
-- compatible = "simple-bus";
-- ranges = <0x0 0x0 0xf0000000 0x1000000>;
--
-- gic: interrupt-controller at 210000 {
-- compatible = "arm,gic-400";
-- #interrupt-cells = <3>;
-- #address-cells = <1>;
-- #size-cells = <1>;
-- ranges;
-- interrupt-controller;
-- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-- reg = <0x210000 0x10000>,
-- <0x220000 0x20000>,
-- <0x240000 0x20000>,
-- <0x260000 0x20000>;
--
-- gic_v2m0: v2m at 280000 {
-- compatible = "arm,gic-v2m-frame";
-- msi-controller;
-- reg = <0x280000 0x1000>;
-- arm,msi-base-spi = <160>;
-- arm,msi-num-spis = <32>;
-- };
-- gic_v2m1: v2m at 290000 {
-- compatible = "arm,gic-v2m-frame";
-- msi-controller;
-- reg = <0x290000 0x1000>;
-- arm,msi-base-spi = <192>;
-- arm,msi-num-spis = <32>;
-- };
-- gic_v2m2: v2m at 2a0000 {
-- compatible = "arm,gic-v2m-frame";
-- msi-controller;
-- reg = <0x2a0000 0x1000>;
-- arm,msi-base-spi = <224>;
-- arm,msi-num-spis = <32>;
-- };
-- gic_v2m3: v2m at 2b0000 {
-- compatible = "arm,gic-v2m-frame";
-- msi-controller;
-- reg = <0x2b0000 0x1000>;
-- arm,msi-base-spi = <256>;
-- arm,msi-num-spis = <32>;
-- };
-- };
--
-- timer {
-- compatible = "arm,armv8-timer";
-- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-- };
--
-- pmu {
-- compatible = "arm,cortex-a72-pmu";
-- interrupt-parent = <&pic>;
-- interrupts = <17>;
-- };
--
-- odmi: odmi at 300000 {
-- compatible = "marvell,odmi-controller";
-- interrupt-controller;
-- msi-controller;
-- marvell,odmi-frames = <4>;
-- reg = <0x300000 0x4000>,
-- <0x304000 0x4000>,
-- <0x308000 0x4000>,
-- <0x30C000 0x4000>;
-- marvell,spi-base = <128>, <136>, <144>, <152>;
-- };
--
-- gicp: gicp at 3f0040 {
-- compatible = "marvell,ap806-gicp";
-- reg = <0x3f0040 0x10>;
-- marvell,spi-ranges = <64 64>, <288 64>;
-- msi-controller;
-- };
--
-- pic: interrupt-controller at 3f0100 {
-- compatible = "marvell,armada-8k-pic";
-- reg = <0x3f0100 0x10>;
-- #interrupt-cells = <1>;
-- interrupt-controller;
-- interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-- };
--
-- sei: interrupt-controller at 3f0200 {
-- compatible = "marvell,ap806-sei";
-- reg = <0x3f0200 0x40>;
-- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-- #interrupt-cells = <1>;
-- interrupt-controller;
-- msi-controller;
-- };
--
-- xor at 400000 {
-- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-- reg = <0x400000 0x1000>,
-- <0x410000 0x1000>;
-- msi-parent = <&gic_v2m0>;
-- clocks = <&ap_clk 3>;
-- dma-coherent;
-- };
--
-- xor at 420000 {
-- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-- reg = <0x420000 0x1000>,
-- <0x430000 0x1000>;
-- msi-parent = <&gic_v2m0>;
-- clocks = <&ap_clk 3>;
-- dma-coherent;
-- };
--
-- xor at 440000 {
-- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-- reg = <0x440000 0x1000>,
-- <0x450000 0x1000>;
-- msi-parent = <&gic_v2m0>;
-- clocks = <&ap_clk 3>;
-- dma-coherent;
-- };
--
-- xor at 460000 {
-- compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-- reg = <0x460000 0x1000>,
-- <0x470000 0x1000>;
-- msi-parent = <&gic_v2m0>;
-- clocks = <&ap_clk 3>;
-- dma-coherent;
-- };
--
-- spi0: spi at 510600 {
-- compatible = "marvell,armada-380-spi";
-- reg = <0x510600 0x50>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-- clocks = <&ap_clk 3>;
-- status = "disabled";
-- };
--
-- i2c0: i2c at 511000 {
-- compatible = "marvell,mv78230-i2c";
-- reg = <0x511000 0x20>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-- timeout-ms = <1000>;
-- clocks = <&ap_clk 3>;
-- status = "disabled";
-- };
--
-- uart0: serial at 512000 {
-- compatible = "snps,dw-apb-uart";
-- reg = <0x512000 0x100>;
-- reg-shift = <2>;
-- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-- reg-io-width = <1>;
-- clocks = <&ap_clk 3>;
-- status = "disabled";
-- };
--
-- uart1: serial at 512100 {
-- compatible = "snps,dw-apb-uart";
-- reg = <0x512100 0x100>;
-- reg-shift = <2>;
-- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-- reg-io-width = <1>;
-- clocks = <&ap_clk 3>;
-- status = "disabled";
--
-- };
--
-- watchdog: watchdog at 610000 {
-- compatible = "arm,sbsa-gwdt";
-- reg = <0x610000 0x1000>, <0x600000 0x1000>;
-- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-- };
--
-- ap_sdhci0: sdhci at 6e0000 {
-- compatible = "marvell,armada-ap806-sdhci";
-- reg = <0x6e0000 0x300>;
-- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-- clock-names = "core";
-- clocks = <&ap_clk 4>;
-- dma-coherent;
-- marvell,xenon-phy-slow-mode;
-- status = "disabled";
-- };
--
-- ap_syscon0: system-controller at 6f4000 {
-- compatible = "syscon", "simple-mfd";
-- reg = <0x6f4000 0x2000>;
--
-- ap_clk: clock {
-- compatible = "marvell,ap806-clock";
-- #clock-cells = <1>;
-- };
--
-- ap_pinctrl: pinctrl {
-- compatible = "marvell,ap806-pinctrl";
--
-- uart0_pins: uart0-pins {
-- marvell,pins = "mpp11", "mpp19";
-- marvell,function = "uart0";
-- };
-- };
--
-- ap_gpio: gpio at 1040 {
-- compatible = "marvell,armada-8k-gpio";
-- offset = <0x1040>;
-- ngpios = <20>;
-- gpio-controller;
-- #gpio-cells = <2>;
-- gpio-ranges = <&ap_pinctrl 0 0 20>;
-- };
-- };
--
-- ap_syscon1: system-controller at 6f8000 {
-- compatible = "syscon", "simple-mfd";
-- reg = <0x6f8000 0x1000>;
-- #address-cells = <1>;
-- #size-cells = <1>;
--
-- cpu_clk: clock-cpu at 278 {
-- compatible = "marvell,ap806-cpu-clock";
-- clocks = <&ap_clk 0>, <&ap_clk 1>;
-- #clock-cells = <1>;
-- reg = <0x278 0xa30>;
-- };
--
-- ap_thermal: thermal-sensor at 80 {
-- compatible = "marvell,armada-ap806-thermal";
-- reg = <0x80 0x10>;
-- interrupt-parent = <&sei>;
-- interrupts = <18>;
-- #thermal-sensor-cells = <1>;
-- };
-- };
-- };
-- };
--
-- /*
-- * The thermal IP features one internal sensor plus, if applicable, one
-- * remote channel wired to one sensor per CPU.
-- *
-- * Only one thermal zone per AP/CP may trigger interrupts at a time, the
-- * first one that will have a critical trip point will be chosen.
-- */
-- thermal-zones {
-- ap_thermal_ic: ap-thermal-ic {
-- polling-delay-passive = <0>; /* Interrupt driven */
-- polling-delay = <0>; /* Interrupt driven */
--
-- thermal-sensors = <&ap_thermal 0>;
--
-- trips {
-- ap_crit: ap-crit {
-- temperature = <100000>; /* mC degrees */
-- hysteresis = <2000>; /* mC degrees */
-- type = "critical";
-- };
-- };
--
-- cooling-maps { };
-- };
--
-- ap_thermal_cpu0: ap-thermal-cpu0 {
-- polling-delay-passive = <1000>;
-- polling-delay = <1000>;
--
-- thermal-sensors = <&ap_thermal 1>;
--
-- trips {
-- cpu0_hot: cpu0-hot {
-- temperature = <85000>;
-- hysteresis = <2000>;
-- type = "passive";
-- };
-- cpu0_emerg: cpu0-emerg {
-- temperature = <95000>;
-- hysteresis = <2000>;
-- type = "passive";
-- };
-- };
--
-- cooling-maps {
-- map0_hot: map0-hot {
-- trip = <&cpu0_hot>;
-- cooling-device = <&cpu0 1 2>,
-- <&cpu1 1 2>;
-- };
-- map0_emerg: map0-ermerg {
-- trip = <&cpu0_emerg>;
-- cooling-device = <&cpu0 3 3>,
-- <&cpu1 3 3>;
-- };
-- };
-- };
--
-- ap_thermal_cpu1: ap-thermal-cpu1 {
-- polling-delay-passive = <1000>;
-- polling-delay = <1000>;
--
-- thermal-sensors = <&ap_thermal 2>;
--
-- trips {
-- cpu1_hot: cpu1-hot {
-- temperature = <85000>;
-- hysteresis = <2000>;
-- type = "passive";
-- };
-- cpu1_emerg: cpu1-emerg {
-- temperature = <95000>;
-- hysteresis = <2000>;
-- type = "passive";
-- };
-- };
--
-- cooling-maps {
-- map1_hot: map1-hot {
-- trip = <&cpu1_hot>;
-- cooling-device = <&cpu0 1 2>,
-- <&cpu1 1 2>;
-- };
-- map1_emerg: map1-emerg {
-- trip = <&cpu1_emerg>;
-- cooling-device = <&cpu0 3 3>,
-- <&cpu1 3 3>;
-- };
-- };
-- };
--
-- ap_thermal_cpu2: ap-thermal-cpu2 {
-- polling-delay-passive = <1000>;
-- polling-delay = <1000>;
--
-- thermal-sensors = <&ap_thermal 3>;
--
-- trips {
-- cpu2_hot: cpu2-hot {
-- temperature = <85000>;
-- hysteresis = <2000>;
-- type = "passive";
-- };
-- cpu2_emerg: cpu2-emerg {
-- temperature = <95000>;
-- hysteresis = <2000>;
-- type = "passive";
-- };
-- };
--
-- cooling-maps {
-- map2_hot: map2-hot {
-- trip = <&cpu2_hot>;
-- cooling-device = <&cpu2 1 2>,
-- <&cpu3 1 2>;
-- };
-- map2_emerg: map2-emerg {
-- trip = <&cpu2_emerg>;
-- cooling-device = <&cpu2 3 3>,
-- <&cpu3 3 3>;
-- };
-- };
-- };
--
-- ap_thermal_cpu3: ap-thermal-cpu3 {
-- polling-delay-passive = <1000>;
-- polling-delay = <1000>;
--
-- thermal-sensors = <&ap_thermal 4>;
--
-- trips {
-- cpu3_hot: cpu3-hot {
-- temperature = <85000>;
-- hysteresis = <2000>;
-- type = "passive";
-- };
-- cpu3_emerg: cpu3-emerg {
-- temperature = <95000>;
-- hysteresis = <2000>;
-- type = "passive";
-- };
-- };
--
-- cooling-maps {
-- map3_hot: map3-bhot {
-- trip = <&cpu3_hot>;
-- cooling-device = <&cpu2 1 2>,
-- <&cpu3 1 2>;
-- };
-- map3_emerg: map3-emerg {
-- trip = <&cpu3_emerg>;
-- cooling-device = <&cpu2 3 3>,
-- <&cpu3 3 3>;
-- };
-- };
-- };
-- };
- };
---- /dev/null
-+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
-@@ -0,0 +1,456 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Marvell Technology Group Ltd.
-+ *
-+ * Device Tree file for Marvell Armada AP80x.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/thermal/thermal.h>
-+
-+/dts-v1/;
-+
-+/ {
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+
-+ aliases {
-+ serial0 = &uart0;
-+ serial1 = &uart1;
-+ gpio0 = &ap_gpio;
-+ spi0 = &spi0;
-+ };
-+
-+ psci {
-+ compatible = "arm,psci-0.2";
-+ method = "smc";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+ ranges;
-+
-+ /*
-+ * This area matches the mapping done with a
-+ * mainline U-Boot, and should be updated by the
-+ * bootloader.
-+ */
-+
-+ psci-area at 4000000 {
-+ reg = <0x0 0x4000000 0x0 0x200000>;
-+ no-map;
-+ };
-+ };
-+
-+ AP_NAME {
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+ compatible = "simple-bus";
-+ interrupt-parent = <&gic>;
-+ ranges;
-+
-+ config-space at f0000000 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "simple-bus";
-+ ranges = <0x0 0x0 0xf0000000 0x1000000>;
-+
-+ gic: interrupt-controller at 210000 {
-+ compatible = "arm,gic-400";
-+ #interrupt-cells = <3>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ interrupt-controller;
-+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-+ reg = <0x210000 0x10000>,
-+ <0x220000 0x20000>,
-+ <0x240000 0x20000>,
-+ <0x260000 0x20000>;
-+
-+ gic_v2m0: v2m at 280000 {
-+ compatible = "arm,gic-v2m-frame";
-+ msi-controller;
-+ reg = <0x280000 0x1000>;
-+ arm,msi-base-spi = <160>;
-+ arm,msi-num-spis = <32>;
-+ };
-+ gic_v2m1: v2m at 290000 {
-+ compatible = "arm,gic-v2m-frame";
-+ msi-controller;
-+ reg = <0x290000 0x1000>;
-+ arm,msi-base-spi = <192>;
-+ arm,msi-num-spis = <32>;
-+ };
-+ gic_v2m2: v2m at 2a0000 {
-+ compatible = "arm,gic-v2m-frame";
-+ msi-controller;
-+ reg = <0x2a0000 0x1000>;
-+ arm,msi-base-spi = <224>;
-+ arm,msi-num-spis = <32>;
-+ };
-+ gic_v2m3: v2m at 2b0000 {
-+ compatible = "arm,gic-v2m-frame";
-+ msi-controller;
-+ reg = <0x2b0000 0x1000>;
-+ arm,msi-base-spi = <256>;
-+ arm,msi-num-spis = <32>;
-+ };
-+ };
-+
-+ timer {
-+ compatible = "arm,armv8-timer";
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-+ };
-+
-+ pmu {
-+ compatible = "arm,cortex-a72-pmu";
-+ interrupt-parent = <&pic>;
-+ interrupts = <17>;
-+ };
-+
-+ odmi: odmi at 300000 {
-+ compatible = "marvell,odmi-controller";
-+ interrupt-controller;
-+ msi-controller;
-+ marvell,odmi-frames = <4>;
-+ reg = <0x300000 0x4000>,
-+ <0x304000 0x4000>,
-+ <0x308000 0x4000>,
-+ <0x30C000 0x4000>;
-+ marvell,spi-base = <128>, <136>, <144>, <152>;
-+ };
-+
-+ gicp: gicp at 3f0040 {
-+ compatible = "marvell,ap806-gicp";
-+ reg = <0x3f0040 0x10>;
-+ marvell,spi-ranges = <64 64>, <288 64>;
-+ msi-controller;
-+ };
-+
-+ pic: interrupt-controller at 3f0100 {
-+ compatible = "marvell,armada-8k-pic";
-+ reg = <0x3f0100 0x10>;
-+ #interrupt-cells = <1>;
-+ interrupt-controller;
-+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ sei: interrupt-controller at 3f0200 {
-+ compatible = "marvell,ap806-sei";
-+ reg = <0x3f0200 0x40>;
-+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-+ #interrupt-cells = <1>;
-+ interrupt-controller;
-+ msi-controller;
-+ };
-+
-+ xor at 400000 {
-+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-+ reg = <0x400000 0x1000>,
-+ <0x410000 0x1000>;
-+ msi-parent = <&gic_v2m0>;
-+ clocks = <&ap_clk 3>;
-+ dma-coherent;
-+ };
-+
-+ xor at 420000 {
-+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-+ reg = <0x420000 0x1000>,
-+ <0x430000 0x1000>;
-+ msi-parent = <&gic_v2m0>;
-+ clocks = <&ap_clk 3>;
-+ dma-coherent;
-+ };
-+
-+ xor at 440000 {
-+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-+ reg = <0x440000 0x1000>,
-+ <0x450000 0x1000>;
-+ msi-parent = <&gic_v2m0>;
-+ clocks = <&ap_clk 3>;
-+ dma-coherent;
-+ };
-+
-+ xor at 460000 {
-+ compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-+ reg = <0x460000 0x1000>,
-+ <0x470000 0x1000>;
-+ msi-parent = <&gic_v2m0>;
-+ clocks = <&ap_clk 3>;
-+ dma-coherent;
-+ };
-+
-+ spi0: spi at 510600 {
-+ compatible = "marvell,armada-380-spi";
-+ reg = <0x510600 0x50>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ap_clk 3>;
-+ status = "disabled";
-+ };
-+
-+ i2c0: i2c at 511000 {
-+ compatible = "marvell,mv78230-i2c";
-+ reg = <0x511000 0x20>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-+ timeout-ms = <1000>;
-+ clocks = <&ap_clk 3>;
-+ status = "disabled";
-+ };
-+
-+ uart0: serial at 512000 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x512000 0x100>;
-+ reg-shift = <2>;
-+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-io-width = <1>;
-+ clocks = <&ap_clk 3>;
-+ status = "disabled";
-+ };
-+
-+ uart1: serial at 512100 {
-+ compatible = "snps,dw-apb-uart";
-+ reg = <0x512100 0x100>;
-+ reg-shift = <2>;
-+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-+ reg-io-width = <1>;
-+ clocks = <&ap_clk 3>;
-+ status = "disabled";
-+
-+ };
-+
-+ watchdog: watchdog at 610000 {
-+ compatible = "arm,sbsa-gwdt";
-+ reg = <0x610000 0x1000>, <0x600000 0x1000>;
-+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ ap_sdhci0: sdhci at 6e0000 {
-+ compatible = "marvell,armada-ap806-sdhci";
-+ reg = <0x6e0000 0x300>;
-+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-+ clock-names = "core";
-+ clocks = <&ap_clk 4>;
-+ dma-coherent;
-+ marvell,xenon-phy-slow-mode;
-+ status = "disabled";
-+ };
-+
-+ ap_syscon0: system-controller at 6f4000 {
-+ compatible = "syscon", "simple-mfd";
-+ reg = <0x6f4000 0x2000>;
-+
-+ ap_clk: clock {
-+ compatible = "marvell,ap806-clock";
-+ #clock-cells = <1>;
-+ };
-+
-+ ap_pinctrl: pinctrl {
-+ compatible = "marvell,ap806-pinctrl";
-+
-+ uart0_pins: uart0-pins {
-+ marvell,pins = "mpp11", "mpp19";
-+ marvell,function = "uart0";
-+ };
-+ };
-+
-+ ap_gpio: gpio at 1040 {
-+ compatible = "marvell,armada-8k-gpio";
-+ offset = <0x1040>;
-+ ngpios = <20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ gpio-ranges = <&ap_pinctrl 0 0 20>;
-+ };
-+ };
-+
-+ ap_syscon1: system-controller at 6f8000 {
-+ compatible = "syscon", "simple-mfd";
-+ reg = <0x6f8000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ cpu_clk: clock-cpu at 278 {
-+ compatible = "marvell,ap806-cpu-clock";
-+ clocks = <&ap_clk 0>, <&ap_clk 1>;
-+ #clock-cells = <1>;
-+ reg = <0x278 0xa30>;
-+ };
-+
-+ ap_thermal: thermal-sensor at 80 {
-+ compatible = "marvell,armada-ap806-thermal";
-+ reg = <0x80 0x10>;
-+ interrupt-parent = <&sei>;
-+ interrupts = <18>;
-+ #thermal-sensor-cells = <1>;
-+ };
-+ };
-+ };
-+ };
-+
-+ /*
-+ * The thermal IP features one internal sensor plus, if applicable, one
-+ * remote channel wired to one sensor per CPU.
-+ *
-+ * Only one thermal zone per AP/CP may trigger interrupts at a time, the
-+ * first one that will have a critical trip point will be chosen.
-+ */
-+ thermal-zones {
-+ ap_thermal_ic: ap-thermal-ic {
-+ polling-delay-passive = <0>; /* Interrupt driven */
-+ polling-delay = <0>; /* Interrupt driven */
-+
-+ thermal-sensors = <&ap_thermal 0>;
-+
-+ trips {
-+ ap_crit: ap-crit {
-+ temperature = <100000>; /* mC degrees */
-+ hysteresis = <2000>; /* mC degrees */
-+ type = "critical";
-+ };
-+ };
-+
-+ cooling-maps { };
-+ };
-+
-+ ap_thermal_cpu0: ap-thermal-cpu0 {
-+ polling-delay-passive = <1000>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&ap_thermal 1>;
-+
-+ trips {
-+ cpu0_hot: cpu0-hot {
-+ temperature = <85000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ cpu0_emerg: cpu0-emerg {
-+ temperature = <95000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ };
-+
-+ cooling-maps {
-+ map0_hot: map0-hot {
-+ trip = <&cpu0_hot>;
-+ cooling-device = <&cpu0 1 2>,
-+ <&cpu1 1 2>;
-+ };
-+ map0_emerg: map0-ermerg {
-+ trip = <&cpu0_emerg>;
-+ cooling-device = <&cpu0 3 3>,
-+ <&cpu1 3 3>;
-+ };
-+ };
-+ };
-+
-+ ap_thermal_cpu1: ap-thermal-cpu1 {
-+ polling-delay-passive = <1000>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&ap_thermal 2>;
-+
-+ trips {
-+ cpu1_hot: cpu1-hot {
-+ temperature = <85000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ cpu1_emerg: cpu1-emerg {
-+ temperature = <95000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ };
-+
-+ cooling-maps {
-+ map1_hot: map1-hot {
-+ trip = <&cpu1_hot>;
-+ cooling-device = <&cpu0 1 2>,
-+ <&cpu1 1 2>;
-+ };
-+ map1_emerg: map1-emerg {
-+ trip = <&cpu1_emerg>;
-+ cooling-device = <&cpu0 3 3>,
-+ <&cpu1 3 3>;
-+ };
-+ };
-+ };
-+
-+ ap_thermal_cpu2: ap-thermal-cpu2 {
-+ polling-delay-passive = <1000>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&ap_thermal 3>;
-+
-+ trips {
-+ cpu2_hot: cpu2-hot {
-+ temperature = <85000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ cpu2_emerg: cpu2-emerg {
-+ temperature = <95000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ };
-+
-+ cooling-maps {
-+ map2_hot: map2-hot {
-+ trip = <&cpu2_hot>;
-+ cooling-device = <&cpu2 1 2>,
-+ <&cpu3 1 2>;
-+ };
-+ map2_emerg: map2-emerg {
-+ trip = <&cpu2_emerg>;
-+ cooling-device = <&cpu2 3 3>,
-+ <&cpu3 3 3>;
-+ };
-+ };
-+ };
-+
-+ ap_thermal_cpu3: ap-thermal-cpu3 {
-+ polling-delay-passive = <1000>;
-+ polling-delay = <1000>;
-+
-+ thermal-sensors = <&ap_thermal 4>;
-+
-+ trips {
-+ cpu3_hot: cpu3-hot {
-+ temperature = <85000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ cpu3_emerg: cpu3-emerg {
-+ temperature = <95000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ };
-+
-+ cooling-maps {
-+ map3_hot: map3-bhot {
-+ trip = <&cpu3_hot>;
-+ cooling-device = <&cpu2 1 2>,
-+ <&cpu3 1 2>;
-+ };
-+ map3_emerg: map3-emerg {
-+ trip = <&cpu3_emerg>;
-+ cooling-device = <&cpu2 3 3>,
-+ <&cpu3 3 3>;
-+ };
-+ };
-+ };
-+ };
-+};
diff --git a/target/linux/mvebu/patches-5.4/009-net-mvneta-add-XDP_TX-support.patch b/target/linux/mvebu/patches-5.4/009-net-mvneta-add-XDP_TX-support.patch
deleted file mode 100644
index 8d9b775f7b..0000000000
--- a/target/linux/mvebu/patches-5.4/009-net-mvneta-add-XDP_TX-support.patch
+++ /dev/null
@@ -1,175 +0,0 @@
-From b0a43db9087a21d96e1a0b716b8d9963064b2d58 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo at kernel.org>
-Date: Sat, 19 Oct 2019 10:13:27 +0200
-Subject: [PATCH 7/7] net: mvneta: add XDP_TX support
-
-Implement XDP_TX verdict and ndo_xdp_xmit net_device_ops function
-pointer
-
-Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 128 ++++++++++++++++++++++++--
- 1 file changed, 121 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -1813,16 +1813,19 @@ static void mvneta_txq_bufs_free(struct
-
- mvneta_txq_inc_get(txq);
-
-- if (!IS_TSO_HEADER(txq, tx_desc->buf_phys_addr))
-+ if (!IS_TSO_HEADER(txq, tx_desc->buf_phys_addr) &&
-+ buf->type != MVNETA_TYPE_XDP_TX)
- dma_unmap_single(pp->dev->dev.parent,
- tx_desc->buf_phys_addr,
- tx_desc->data_size, DMA_TO_DEVICE);
-- if (!buf->skb)
-- continue;
--
-- bytes_compl += buf->skb->len;
-- pkts_compl++;
-- dev_kfree_skb_any(buf->skb);
-+ if (buf->type == MVNETA_TYPE_SKB && buf->skb) {
-+ bytes_compl += buf->skb->len;
-+ pkts_compl++;
-+ dev_kfree_skb_any(buf->skb);
-+ } else if (buf->type == MVNETA_TYPE_XDP_TX ||
-+ buf->type == MVNETA_TYPE_XDP_NDO) {
-+ xdp_return_frame(buf->xdpf);
-+ }
- }
-
- netdev_tx_completed_queue(nq, pkts_compl, bytes_compl);
-@@ -1987,6 +1990,111 @@ int mvneta_rx_refill_queue(struct mvneta
- }
-
- static int
-+mvneta_xdp_submit_frame(struct mvneta_port *pp, struct mvneta_tx_queue *txq,
-+ struct xdp_frame *xdpf, bool dma_map)
-+{
-+ struct mvneta_tx_desc *tx_desc;
-+ struct mvneta_tx_buf *buf;
-+ dma_addr_t dma_addr;
-+
-+ if (txq->count >= txq->tx_stop_threshold)
-+ return MVNETA_XDP_DROPPED;
-+
-+ tx_desc = mvneta_txq_next_desc_get(txq);
-+
-+ buf = &txq->buf[txq->txq_put_index];
-+ if (dma_map) {
-+ /* ndo_xdp_xmit */
-+ dma_addr = dma_map_single(pp->dev->dev.parent, xdpf->data,
-+ xdpf->len, DMA_TO_DEVICE);
-+ if (dma_mapping_error(pp->dev->dev.parent, dma_addr)) {
-+ mvneta_txq_desc_put(txq);
-+ return MVNETA_XDP_DROPPED;
-+ }
-+ buf->type = MVNETA_TYPE_XDP_NDO;
-+ } else {
-+ struct page *page = virt_to_page(xdpf->data);
-+
-+ dma_addr = page_pool_get_dma_addr(page) +
-+ sizeof(*xdpf) + xdpf->headroom;
-+ dma_sync_single_for_device(pp->dev->dev.parent, dma_addr,
-+ xdpf->len, DMA_BIDIRECTIONAL);
-+ buf->type = MVNETA_TYPE_XDP_TX;
-+ }
-+ buf->xdpf = xdpf;
-+
-+ tx_desc->command = MVNETA_TXD_FLZ_DESC;
-+ tx_desc->buf_phys_addr = dma_addr;
-+ tx_desc->data_size = xdpf->len;
-+
-+ mvneta_update_stats(pp, 1, xdpf->len, true);
-+ mvneta_txq_inc_put(txq);
-+ txq->pending++;
-+ txq->count++;
-+
-+ return MVNETA_XDP_TX;
-+}
-+
-+static int
-+mvneta_xdp_xmit_back(struct mvneta_port *pp, struct xdp_buff *xdp)
-+{
-+ struct mvneta_tx_queue *txq;
-+ struct netdev_queue *nq;
-+ struct xdp_frame *xdpf;
-+ int cpu;
-+ u32 ret;
-+
-+ xdpf = convert_to_xdp_frame(xdp);
-+ if (unlikely(!xdpf))
-+ return MVNETA_XDP_DROPPED;
-+
-+ cpu = smp_processor_id();
-+ txq = &pp->txqs[cpu % txq_number];
-+ nq = netdev_get_tx_queue(pp->dev, txq->id);
-+
-+ __netif_tx_lock(nq, cpu);
-+ ret = mvneta_xdp_submit_frame(pp, txq, xdpf, false);
-+ if (ret == MVNETA_XDP_TX)
-+ mvneta_txq_pend_desc_add(pp, txq, 0);
-+ __netif_tx_unlock(nq);
-+
-+ return ret;
-+}
-+
-+static int
-+mvneta_xdp_xmit(struct net_device *dev, int num_frame,
-+ struct xdp_frame **frames, u32 flags)
-+{
-+ struct mvneta_port *pp = netdev_priv(dev);
-+ int cpu = smp_processor_id();
-+ struct mvneta_tx_queue *txq;
-+ struct netdev_queue *nq;
-+ int i, drops = 0;
-+ u32 ret;
-+
-+ if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
-+ return -EINVAL;
-+
-+ txq = &pp->txqs[cpu % txq_number];
-+ nq = netdev_get_tx_queue(pp->dev, txq->id);
-+
-+ __netif_tx_lock(nq, cpu);
-+ for (i = 0; i < num_frame; i++) {
-+ ret = mvneta_xdp_submit_frame(pp, txq, frames[i], true);
-+ if (ret != MVNETA_XDP_TX) {
-+ xdp_return_frame_rx_napi(frames[i]);
-+ drops++;
-+ }
-+ }
-+
-+ if (unlikely(flags & XDP_XMIT_FLUSH))
-+ mvneta_txq_pend_desc_add(pp, txq, 0);
-+ __netif_tx_unlock(nq);
-+
-+ return num_frame - drops;
-+}
-+
-+static int
- mvneta_run_xdp(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
- struct bpf_prog *prog, struct xdp_buff *xdp)
- {
-@@ -2008,6 +2116,11 @@ mvneta_run_xdp(struct mvneta_port *pp, s
- }
- break;
- }
-+ case XDP_TX:
-+ ret = mvneta_xdp_xmit_back(pp, xdp);
-+ if (ret != MVNETA_XDP_TX)
-+ xdp_return_buff(xdp);
-+ break;
- default:
- bpf_warn_invalid_xdp_action(act);
- /* fall through */
-@@ -4581,6 +4694,7 @@ static const struct net_device_ops mvnet
- .ndo_get_stats64 = mvneta_get_stats64,
- .ndo_do_ioctl = mvneta_ioctl,
- .ndo_bpf = mvneta_xdp,
-+ .ndo_xdp_xmit = mvneta_xdp_xmit,
- };
-
- static const struct ethtool_ops mvneta_eth_tool_ops = {
diff --git a/target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch b/target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch
deleted file mode 100644
index 38965dd9e5..0000000000
--- a/target/linux/mvebu/patches-5.4/009-v5.5-arm64-dts-marvell-Move-clocks-to-AP806-specific-file.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 4f267f2a806b556678b84c4d80c2f4bff8d000d9 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal at bootlin.com>
-Date: Fri, 4 Oct 2019 16:27:23 +0200
-Subject: [PATCH] arm64: dts: marvell: Move clocks to AP806 specific file
-
-Regular clocks and CPU clocks are specific to AP806, move them out of
-the generic AP80x file so that AP807 can use its own clocks.
-
-Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 16 ++++++++++++++++
- arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 12 ------------
- 2 files changed, 16 insertions(+), 12 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
-@@ -12,3 +12,19 @@
- model = "Marvell Armada AP806";
- compatible = "marvell,armada-ap806";
- };
-+
-+&ap_syscon0 {
-+ ap_clk: clock {
-+ compatible = "marvell,ap806-clock";
-+ #clock-cells = <1>;
-+ };
-+};
-+
-+&ap_syscon1 {
-+ cpu_clk: clock-cpu at 278 {
-+ compatible = "marvell,ap806-cpu-clock";
-+ clocks = <&ap_clk 0>, <&ap_clk 1>;
-+ #clock-cells = <1>;
-+ reg = <0x278 0xa30>;
-+ };
-+};
---- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
-@@ -248,11 +248,6 @@
- compatible = "syscon", "simple-mfd";
- reg = <0x6f4000 0x2000>;
-
-- ap_clk: clock {
-- compatible = "marvell,ap806-clock";
-- #clock-cells = <1>;
-- };
--
- ap_pinctrl: pinctrl {
- compatible = "marvell,ap806-pinctrl";
-
-@@ -278,13 +273,6 @@
- #address-cells = <1>;
- #size-cells = <1>;
-
-- cpu_clk: clock-cpu at 278 {
-- compatible = "marvell,ap806-cpu-clock";
-- clocks = <&ap_clk 0>, <&ap_clk 1>;
-- #clock-cells = <1>;
-- reg = <0x278 0xa30>;
-- };
--
- ap_thermal: thermal-sensor at 80 {
- compatible = "marvell,armada-ap806-thermal";
- reg = <0x80 0x10>;
diff --git a/target/linux/mvebu/patches-5.4/010-net-mvneta-fix-build-skb-for-bm-capable-devices.patch b/target/linux/mvebu/patches-5.4/010-net-mvneta-fix-build-skb-for-bm-capable-devices.patch
deleted file mode 100644
index adfa51e4e8..0000000000
--- a/target/linux/mvebu/patches-5.4/010-net-mvneta-fix-build-skb-for-bm-capable-devices.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From b37fa92e20ef28aada852cbf03b368d29a20478c Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo at kernel.org>
-Date: Thu, 14 Nov 2019 01:25:55 +0200
-Subject: [PATCH] net: mvneta: fix build skb for bm capable devices
-
-Fix build_skb for bm capable devices when they fall-back using swbm path
-(e.g. when bm properties are configured in device tree but
-CONFIG_MVNETA_BM_ENABLE is not set). In this case rx_offset_correction is
-overwritten so we need to use it building skb instead of
-MVNETA_SKB_HEADROOM directly
-
-Fixes: 8dc9a0888f4c ("net: mvneta: rely on build_skb in mvneta_rx_swbm poll routine")
-Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support")
-Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
-Reported-by: Andrew Lunn <andrew at lunn.ch>
-Tested-by: Andrew Lunn <andrew at lunn.ch>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -2167,7 +2167,7 @@ mvneta_swbm_rx_frame(struct mvneta_port
- prefetch(data);
-
- xdp->data_hard_start = data;
-- xdp->data = data + MVNETA_SKB_HEADROOM + MVNETA_MH_SIZE;
-+ xdp->data = data + pp->rx_offset_correction + MVNETA_MH_SIZE;
- xdp->data_end = xdp->data + data_len;
- xdp_set_data_meta_invalid(xdp);
-
-@@ -2232,7 +2232,7 @@ mvneta_swbm_add_rx_fragment(struct mvnet
- /* refill descriptor with new buffer later */
- skb_add_rx_frag(rxq->skb,
- skb_shinfo(rxq->skb)->nr_frags,
-- page, MVNETA_SKB_HEADROOM, data_len,
-+ page, pp->rx_offset_correction, data_len,
- PAGE_SIZE);
- }
- page_pool_release_page(rxq->page_pool, page);
diff --git a/target/linux/mvebu/patches-5.4/011-arm64-dts-uDPU-remove-i2c-fast-mode.patch b/target/linux/mvebu/patches-5.4/011-arm64-dts-uDPU-remove-i2c-fast-mode.patch
deleted file mode 100644
index 2922d49f44..0000000000
--- a/target/linux/mvebu/patches-5.4/011-arm64-dts-uDPU-remove-i2c-fast-mode.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From fe3ec631a77ded87817f449691710a436a80caa7 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel at armlinux.org.uk>
-Date: Sat, 16 Nov 2019 11:07:01 +0000
-Subject: [PATCH] arm64: dts: uDPU: remove i2c-fast-mode
-
-The I2C bus violates the timing specifications when run in fast mode
-on the uDPU, so switch to 100kHz mode.
-
-Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -119,12 +119,14 @@
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-+ /delete-property/mrvl,i2c-fast-mode;
- };
-
- &i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-+ /delete-property/mrvl,i2c-fast-mode;
-
- lm75 at 48 {
- status = "okay";
diff --git a/target/linux/mvebu/patches-5.4/012-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch b/target/linux/mvebu/patches-5.4/012-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch
deleted file mode 100644
index 1884def2c6..0000000000
--- a/target/linux/mvebu/patches-5.4/012-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From cd592187f9de3c6305d6c1c66f7fac084cb5b846 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel at armlinux.org.uk>
-Date: Tue, 19 Nov 2019 22:53:04 +0000
-Subject: [PATCH] arm64: dts: uDPU: SFP cages support 3W modules
-
-The SFP cages are designed to support up to 3W modules, such as G.hn,
-G.fast and MoCA modules. Although there is no way for such modules to
-declare to software that they consume 3W, we document in DT that this
-is the designed power level for these cages.
-
-Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -69,6 +69,7 @@
- mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
-+ maximum-power-milliwatt = <3000>;
- };
-
- sfp_eth1: sfp-eth1 {
-@@ -78,6 +79,7 @@
- mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
-+ maximum-power-milliwatt = <3000>;
- };
- };
-
diff --git a/target/linux/mvebu/patches-5.4/013-net-mvneta-rely-on-page_pool_recycle_direct-in-mvnet.patch b/target/linux/mvebu/patches-5.4/013-net-mvneta-rely-on-page_pool_recycle_direct-in-mvnet.patch
deleted file mode 100644
index 6e79aeb358..0000000000
--- a/target/linux/mvebu/patches-5.4/013-net-mvneta-rely-on-page_pool_recycle_direct-in-mvnet.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From f383b2950070ce4f34e74db94f70bb565b746e97 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo at kernel.org>
-Date: Wed, 20 Nov 2019 16:54:17 +0200
-Subject: [PATCH] net: mvneta: rely on page_pool_recycle_direct in
- mvneta_run_xdp
-
-Rely on page_pool_recycle_direct and not on xdp_return_buff in
-mvneta_run_xdp. This is a preliminary patch to limit the dma sync len
-to the one strictly necessary
-
-Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
-Acked-by: Jesper Dangaard Brouer <brouer at redhat.com>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -2110,7 +2110,8 @@ mvneta_run_xdp(struct mvneta_port *pp, s
- err = xdp_do_redirect(pp->dev, xdp, prog);
- if (err) {
- ret = MVNETA_XDP_DROPPED;
-- xdp_return_buff(xdp);
-+ page_pool_recycle_direct(rxq->page_pool,
-+ virt_to_head_page(xdp->data));
- } else {
- ret = MVNETA_XDP_REDIR;
- }
-@@ -2119,7 +2120,8 @@ mvneta_run_xdp(struct mvneta_port *pp, s
- case XDP_TX:
- ret = mvneta_xdp_xmit_back(pp, xdp);
- if (ret != MVNETA_XDP_TX)
-- xdp_return_buff(xdp);
-+ page_pool_recycle_direct(rxq->page_pool,
-+ virt_to_head_page(xdp->data));
- break;
- default:
- bpf_warn_invalid_xdp_action(act);
diff --git a/target/linux/mvebu/patches-5.4/014-mvneta-driver-disallow-XDP-program-on-hardware-buffe.patch b/target/linux/mvebu/patches-5.4/014-mvneta-driver-disallow-XDP-program-on-hardware-buffe.patch
deleted file mode 100644
index 6558c6a6e2..0000000000
--- a/target/linux/mvebu/patches-5.4/014-mvneta-driver-disallow-XDP-program-on-hardware-buffe.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 79572c98c554dcdb080bca547c871a51716dcdf8 Mon Sep 17 00:00:00 2001
-From: Sven Auhagen <sven.auhagen at voleatech.de>
-Date: Sat, 25 Jan 2020 08:07:03 +0000
-Subject: [PATCH] mvneta driver disallow XDP program on hardware buffer
- management
-
-Recently XDP Support was added to the mvneta driver
-for software buffer management only.
-It is still possible to attach an XDP program if
-hardware buffer management is used.
-It is not doing anything at that point.
-
-The patch disallows attaching XDP programs to mvneta
-if hardware buffer management is used.
-
-I am sorry about that. It is my first submission and I am having
-some troubles with the format of my emails.
-
-v4 -> v5:
-- Remove extra tabs
-
-v3 -> v4:
-- Please ignore v3 I accidentally submitted
- my other patch with git-send-mail and v4 is correct
-
-v2 -> v3:
-- My mailserver corrupted the patch
- resubmission with git-send-email
-
-v1 -> v2:
-- Fixing the patches indentation
-
-Signed-off-by: Sven Auhagen <sven.auhagen at voleatech.de>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4270,6 +4270,12 @@ static int mvneta_xdp_setup(struct net_d
- return -EOPNOTSUPP;
- }
-
-+ if (pp->bm_priv) {
-+ NL_SET_ERR_MSG_MOD(extack,
-+ "Hardware Buffer Management not supported on XDP");
-+ return -EOPNOTSUPP;
-+ }
-+
- need_update = !!pp->xdp_prog != !!prog;
- if (running && need_update)
- mvneta_stop(dev);
diff --git a/target/linux/mvebu/patches-5.4/015-net-mvneta-fix-XDP-support-if-sw-bm-is-used-as-fallb.patch b/target/linux/mvebu/patches-5.4/015-net-mvneta-fix-XDP-support-if-sw-bm-is-used-as-fallb.patch
deleted file mode 100644
index 1299f3f69b..0000000000
--- a/target/linux/mvebu/patches-5.4/015-net-mvneta-fix-XDP-support-if-sw-bm-is-used-as-fallb.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 44efc78d0e464ce70b45b165c005f8bedc17952e Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo at kernel.org>
-Date: Wed, 29 Jan 2020 12:50:53 +0100
-Subject: [PATCH] net: mvneta: fix XDP support if sw bm is used as fallback
-
-In order to fix XDP support if sw buffer management is used as fallback
-for hw bm devices, define MVNETA_SKB_HEADROOM as maximum between
-XDP_PACKET_HEADROOM and NET_SKB_PAD and let the hw aligns the IP header
-to 4-byte boundary.
-Fix rx_offset_correction initialization if mvneta_bm_port_init fails in
-mvneta_resume routine
-
-Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support")
-Tested-by: Sven Auhagen <sven.auhagen at voleatech.de>
-Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -326,8 +326,7 @@
- ETH_HLEN + ETH_FCS_LEN, \
- cache_line_size())
-
--#define MVNETA_SKB_HEADROOM (max(XDP_PACKET_HEADROOM, NET_SKB_PAD) + \
-- NET_IP_ALIGN)
-+#define MVNETA_SKB_HEADROOM max(XDP_PACKET_HEADROOM, NET_SKB_PAD)
- #define MVNETA_SKB_PAD (SKB_DATA_ALIGN(sizeof(struct skb_shared_info) + \
- MVNETA_SKB_HEADROOM))
- #define MVNETA_SKB_SIZE(len) (SKB_DATA_ALIGN(len) + MVNETA_SKB_PAD)
-@@ -1174,6 +1173,7 @@ bm_mtu_err:
- mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short, 1 << pp->id);
-
- pp->bm_priv = NULL;
-+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
- mvreg_write(pp, MVNETA_ACC_MODE, MVNETA_ACC_MODE_EXT1);
- netdev_info(pp->dev, "fail to update MTU, fall back to software BM\n");
- }
-@@ -4989,7 +4989,6 @@ static int mvneta_probe(struct platform_
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- pp->id = global_port_id++;
-- pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
-
- /* Obtain access to BM resources if enabled and already initialized */
- bm_node = of_parse_phandle(dn, "buffer-manager", 0);
-@@ -5014,6 +5013,10 @@ static int mvneta_probe(struct platform_
- }
- of_node_put(bm_node);
-
-+ /* sw buffer management */
-+ if (!pp->bm_priv)
-+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
-+
- err = mvneta_init(&pdev->dev, pp);
- if (err < 0)
- goto err_netdev;
-@@ -5171,6 +5174,7 @@ static int mvneta_resume(struct device *
- err = mvneta_bm_port_init(pdev, pp);
- if (err < 0) {
- dev_info(&pdev->dev, "use SW buffer management\n");
-+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
- pp->bm_priv = NULL;
- }
- }
diff --git a/target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch b/target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch
deleted file mode 100644
index 3ff0dcb166..0000000000
--- a/target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 6964494582f56a3882c2c53b0edbfe99eb32b2e1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali at kernel.org>
-Date: Thu, 30 Apr 2020 10:06:14 +0200
-Subject: [PATCH] PCI: aardvark: Train link immediately after enabling training
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link
-training and starting link training causes detection issues with some
-buggy cards (such as Compex WLE900VX).
-
-Move the code which enables link training immediately before the one
-which starts link traning.
-
-This fixes detection issues of Compex WLE900VX card on Turris MOX after
-cold boot.
-
-Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@kernel.org
-Fixes: f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready...")
-Tested-by: Tomasz Maciej Nowak <tmn505 at gmail.com>
-Signed-off-by: Pali Rohár <pali at kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
-Acked-by: Rob Herring <robh at kernel.org>
-Acked-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
----
- drivers/pci/controller/pci-aardvark.c | 15 +++++++++------
- 1 file changed, 9 insertions(+), 6 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -311,11 +311,6 @@ static void advk_pcie_setup_hw(struct ad
- reg |= LANE_COUNT_1;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
-- /* Enable link training */
-- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-- reg |= LINK_TRAINING_EN;
-- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
--
- /* Enable MSI */
- reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
- reg |= PCIE_CORE_CTRL2_MSI_ENABLE;
-@@ -357,7 +352,15 @@ static void advk_pcie_setup_hw(struct ad
- */
- msleep(PCI_PM_D3COLD_WAIT);
-
-- /* Start link training */
-+ /* Enable link training */
-+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-+ reg |= LINK_TRAINING_EN;
-+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-+
-+ /*
-+ * Start link training immediately after enabling it.
-+ * This solves problems for some buggy cards.
-+ */
- reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
- reg |= PCIE_CORE_LINK_TRAINING;
- advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
diff --git a/target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch b/target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch
deleted file mode 100644
index e3a38740c3..0000000000
--- a/target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch
+++ /dev/null
@@ -1,208 +0,0 @@
-From 43fc679ced18006b12d918d7a8a4af392b7fbfe7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun at nic.cz>
-Date: Thu, 30 Apr 2020 10:06:17 +0200
-Subject: [PATCH] PCI: aardvark: Improve link training
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Currently the aardvark driver trains link in PCIe gen2 mode. This may
-cause some buggy gen1 cards (such as Compex WLE900VX) to be unstable or
-even not detected. Moreover when ASPM code tries to retrain link second
-time, these cards may stop responding and link goes down. If gen1 is
-used this does not happen.
-
-Unconditionally forcing gen1 is not a good solution since it may have
-performance impact on gen2 cards.
-
-To overcome this, read 'max-link-speed' property (as defined in PCI
-device tree bindings) and use this as max gen mode. Then iteratively try
-link training at this mode or lower until successful. After successful
-link training choose final controller gen based on Negotiated Link Speed
-from Link Status register, which should match card speed.
-
-Link: https://lore.kernel.org/r/20200430080625.26070-5-pali@kernel.org
-Tested-by: Tomasz Maciej Nowak <tmn505 at gmail.com>
-Signed-off-by: Pali Rohár <pali at kernel.org>
-Signed-off-by: Marek Behún <marek.behun at nic.cz>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
-Reviewed-by: Rob Herring <robh at kernel.org>
-Acked-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
----
- drivers/pci/controller/pci-aardvark.c | 114 ++++++++++++++++++++------
- 1 file changed, 89 insertions(+), 25 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -39,6 +39,7 @@
- #define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0
- #define PCIE_CORE_LINK_L0S_ENTRY BIT(0)
- #define PCIE_CORE_LINK_TRAINING BIT(5)
-+#define PCIE_CORE_LINK_SPEED_SHIFT 16
- #define PCIE_CORE_LINK_WIDTH_SHIFT 20
- #define PCIE_CORE_ERR_CAPCTL_REG 0x118
- #define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)
-@@ -202,6 +203,7 @@ struct advk_pcie {
- struct mutex msi_used_lock;
- u16 msi_msg;
- int root_bus_nr;
-+ int link_gen;
- struct pci_bridge_emul bridge;
- };
-
-@@ -226,20 +228,16 @@ static int advk_pcie_link_up(struct advk
-
- static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
- {
-- struct device *dev = &pcie->pdev->dev;
- int retries;
-
- /* check if the link is up or not */
- for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
-- if (advk_pcie_link_up(pcie)) {
-- dev_info(dev, "link up\n");
-+ if (advk_pcie_link_up(pcie))
- return 0;
-- }
-
- usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
- }
-
-- dev_err(dev, "link never came up\n");
- return -ETIMEDOUT;
- }
-
-@@ -254,6 +252,85 @@ static void advk_pcie_wait_for_retrain(s
- }
- }
-
-+static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
-+{
-+ int ret, neg_gen;
-+ u32 reg;
-+
-+ /* Setup link speed */
-+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-+ reg &= ~PCIE_GEN_SEL_MSK;
-+ if (gen == 3)
-+ reg |= SPEED_GEN_3;
-+ else if (gen == 2)
-+ reg |= SPEED_GEN_2;
-+ else
-+ reg |= SPEED_GEN_1;
-+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-+
-+ /*
-+ * Enable link training. This is not needed in every call to this
-+ * function, just once suffices, but it does not break anything either.
-+ */
-+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-+ reg |= LINK_TRAINING_EN;
-+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-+
-+ /*
-+ * Start link training immediately after enabling it.
-+ * This solves problems for some buggy cards.
-+ */
-+ reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
-+ reg |= PCIE_CORE_LINK_TRAINING;
-+ advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
-+
-+ ret = advk_pcie_wait_for_link(pcie);
-+ if (ret)
-+ return ret;
-+
-+ reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
-+ neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf;
-+
-+ return neg_gen;
-+}
-+
-+static void advk_pcie_train_link(struct advk_pcie *pcie)
-+{
-+ struct device *dev = &pcie->pdev->dev;
-+ int neg_gen = -1, gen;
-+
-+ /*
-+ * Try link training at link gen specified by device tree property
-+ * 'max-link-speed'. If this fails, iteratively train at lower gen.
-+ */
-+ for (gen = pcie->link_gen; gen > 0; --gen) {
-+ neg_gen = advk_pcie_train_at_gen(pcie, gen);
-+ if (neg_gen > 0)
-+ break;
-+ }
-+
-+ if (neg_gen < 0)
-+ goto err;
-+
-+ /*
-+ * After successful training if negotiated gen is lower than requested,
-+ * train again on negotiated gen. This solves some stability issues for
-+ * some buggy gen1 cards.
-+ */
-+ if (neg_gen < gen) {
-+ gen = neg_gen;
-+ neg_gen = advk_pcie_train_at_gen(pcie, gen);
-+ }
-+
-+ if (neg_gen == gen) {
-+ dev_info(dev, "link up at gen %i\n", gen);
-+ return;
-+ }
-+
-+err:
-+ dev_err(dev, "link never came up\n");
-+}
-+
- static void advk_pcie_setup_hw(struct advk_pcie *pcie)
- {
- u32 reg;
-@@ -299,12 +376,6 @@ static void advk_pcie_setup_hw(struct ad
- PCIE_CORE_CTRL2_TD_ENABLE;
- advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
-
-- /* Set GEN2 */
-- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-- reg &= ~PCIE_GEN_SEL_MSK;
-- reg |= SPEED_GEN_2;
-- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
--
- /* Set lane X1 */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg &= ~LANE_CNT_MSK;
-@@ -352,20 +423,7 @@ static void advk_pcie_setup_hw(struct ad
- */
- msleep(PCI_PM_D3COLD_WAIT);
-
-- /* Enable link training */
-- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-- reg |= LINK_TRAINING_EN;
-- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
--
-- /*
-- * Start link training immediately after enabling it.
-- * This solves problems for some buggy cards.
-- */
-- reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
-- reg |= PCIE_CORE_LINK_TRAINING;
-- advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
--
-- advk_pcie_wait_for_link(pcie);
-+ advk_pcie_train_link(pcie);
-
- reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
- reg |= PCIE_CORE_CMD_MEM_ACCESS_EN |
-@@ -1077,6 +1135,12 @@ static int advk_pcie_probe(struct platfo
- return ret;
- }
-
-+ ret = of_pci_get_max_link_speed(dev->of_node);
-+ if (ret <= 0 || ret > 3)
-+ pcie->link_gen = 3;
-+ else
-+ pcie->link_gen = ret;
-+
- advk_pcie_setup_hw(pcie);
-
- ret = advk_sw_pci_bridge_init(pcie);
diff --git a/target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch b/target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch
deleted file mode 100644
index fde01fa987..0000000000
--- a/target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From 5169a9851daaa2782a7bd2bb83d5b1bd224b2879 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali at kernel.org>
-Date: Thu, 30 Apr 2020 10:06:18 +0200
-Subject: [PATCH] PCI: aardvark: Issue PERST via GPIO
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add support for issuing PERST via GPIO specified in 'reset-gpios'
-property (as described in PCI device tree bindings).
-
-Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected
-after reboot when PERST is not issued during driver initialization.
-
-If bootloader already enabled link training then issuing PERST has no
-effect for some buggy cards (e.g. Compex WLE900VX) and these cards are
-not detected. We therefore clear the LINK_TRAINING_EN register before.
-
-It was observed that Compex WLE900VX card needs to be in PERST reset
-for at least 10ms if bootloader enabled link training.
-
-Tested on Turris MOX.
-
-Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org
-Tested-by: Tomasz Maciej Nowak <tmn505 at gmail.com>
-Signed-off-by: Pali Rohár <pali at kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
----
- drivers/pci/controller/pci-aardvark.c | 43 ++++++++++++++++++++++++++-
- 1 file changed, 42 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -9,6 +9,7 @@
- */
-
- #include <linux/delay.h>
-+#include <linux/gpio.h>
- #include <linux/interrupt.h>
- #include <linux/irq.h>
- #include <linux/irqdomain.h>
-@@ -17,6 +18,7 @@
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/of_address.h>
-+#include <linux/of_gpio.h>
- #include <linux/of_pci.h>
-
- #include "../pci.h"
-@@ -205,6 +207,7 @@ struct advk_pcie {
- int root_bus_nr;
- int link_gen;
- struct pci_bridge_emul bridge;
-+ struct gpio_desc *reset_gpio;
- };
-
- static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
-@@ -331,10 +334,31 @@ err:
- dev_err(dev, "link never came up\n");
- }
-
-+static void advk_pcie_issue_perst(struct advk_pcie *pcie)
-+{
-+ u32 reg;
-+
-+ if (!pcie->reset_gpio)
-+ return;
-+
-+ /* PERST does not work for some cards when link training is enabled */
-+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
-+ reg &= ~LINK_TRAINING_EN;
-+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-+
-+ /* 10ms delay is needed for some cards */
-+ dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
-+ gpiod_set_value_cansleep(pcie->reset_gpio, 1);
-+ usleep_range(10000, 11000);
-+ gpiod_set_value_cansleep(pcie->reset_gpio, 0);
-+}
-+
- static void advk_pcie_setup_hw(struct advk_pcie *pcie)
- {
- u32 reg;
-
-+ advk_pcie_issue_perst(pcie);
-+
- /* Set to Direct mode */
- reg = advk_readl(pcie, CTRL_CONFIG_REG);
- reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
-@@ -417,7 +441,8 @@ static void advk_pcie_setup_hw(struct ad
-
- /*
- * PERST# signal could have been asserted by pinctrl subsystem before
-- * probe() callback has been called, making the endpoint going into
-+ * probe() callback has been called or issued explicitly by reset gpio
-+ * function advk_pcie_issue_perst(), making the endpoint going into
- * fundamental reset. As required by PCI Express spec a delay for at
- * least 100ms after such a reset before link training is needed.
- */
-@@ -1135,6 +1160,22 @@ static int advk_pcie_probe(struct platfo
- return ret;
- }
-
-+ pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
-+ "reset-gpios", 0,
-+ GPIOD_OUT_LOW,
-+ "pcie1-reset");
-+ ret = PTR_ERR_OR_ZERO(pcie->reset_gpio);
-+ if (ret) {
-+ if (ret == -ENOENT) {
-+ pcie->reset_gpio = NULL;
-+ } else {
-+ if (ret != -EPROBE_DEFER)
-+ dev_err(dev, "Failed to get reset-gpio: %i\n",
-+ ret);
-+ return ret;
-+ }
-+ }
-+
- ret = of_pci_get_max_link_speed(dev->of_node);
- if (ret <= 0 || ret > 3)
- pcie->link_gen = 3;
diff --git a/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch b/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch
deleted file mode 100644
index edff5c4a9c..0000000000
--- a/target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From 366697018c9a2aa67d457bfdc495115cface6ae8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun at nic.cz>
-Date: Thu, 30 Apr 2020 10:06:20 +0200
-Subject: [PATCH] PCI: aardvark: Add PHY support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-With recent proposed changes for U-Boot it is possible that bootloader
-won't initialize the PHY for this controller (currently the PHY is
-initialized regardless whether PCI is used in U-Boot, but with these
-proposed changes the PHY is initialized only on request).
-
-Since the mvebu-a3700-comphy driver by Miquèl Raynal supports enabling
-PCIe PHY, and since Linux' functionality should be independent on what
-bootloader did, add code for enabling generic PHY if found in device OF
-node.
-
-The mvebu-a3700-comphy driver does PHY powering via SMC calls to ARM
-Trusted Firmware. The corresponding code in ARM Trusted Firmware skips
-one register write which U-Boot does not: step 7 ("Enable TX"), see [1].
-Instead ARM Trusted Firmware expects PCIe driver to do this step,
-probably because the register is in PCIe controller address space,
-instead of PHY address space. We therefore add this step into the
-advk_pcie_setup_hw function.
-
-[1] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/drivers/marvell/comphy/phy-comphy-3700.c?h=v2.3-rc2#n836
-
-Link: https://lore.kernel.org/r/20200430080625.26070-8-pali@kernel.org
-Tested-by: Tomasz Maciej Nowak <tmn505 at gmail.com>
-Signed-off-by: Marek Behún <marek.behun at nic.cz>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
-Reviewed-by: Rob Herring <robh at kernel.org>
-Acked-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
-Cc: Miquèl Raynal <miquel.raynal at bootlin.com>
----
- drivers/pci/controller/pci-aardvark.c | 69 +++++++++++++++++++++++++++
- 1 file changed, 69 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -16,6 +16,7 @@
- #include <linux/kernel.h>
- #include <linux/pci.h>
- #include <linux/init.h>
-+#include <linux/phy/phy.h>
- #include <linux/platform_device.h>
- #include <linux/of_address.h>
- #include <linux/of_gpio.h>
-@@ -103,6 +104,8 @@
- #define PCIE_CORE_CTRL2_STRICT_ORDER_ENABLE BIT(5)
- #define PCIE_CORE_CTRL2_OB_WIN_ENABLE BIT(6)
- #define PCIE_CORE_CTRL2_MSI_ENABLE BIT(10)
-+#define PCIE_CORE_REF_CLK_REG (CONTROL_BASE_ADDR + 0x14)
-+#define PCIE_CORE_REF_CLK_TX_ENABLE BIT(1)
- #define PCIE_MSG_LOG_REG (CONTROL_BASE_ADDR + 0x30)
- #define PCIE_ISR0_REG (CONTROL_BASE_ADDR + 0x40)
- #define PCIE_MSG_PM_PME_MASK BIT(7)
-@@ -208,6 +211,7 @@ struct advk_pcie {
- int link_gen;
- struct pci_bridge_emul bridge;
- struct gpio_desc *reset_gpio;
-+ struct phy *phy;
- };
-
- static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
-@@ -359,6 +363,11 @@ static void advk_pcie_setup_hw(struct ad
-
- advk_pcie_issue_perst(pcie);
-
-+ /* Enable TX */
-+ reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG);
-+ reg |= PCIE_CORE_REF_CLK_TX_ENABLE;
-+ advk_writel(pcie, reg, PCIE_CORE_REF_CLK_REG);
-+
- /* Set to Direct mode */
- reg = advk_readl(pcie, CTRL_CONFIG_REG);
- reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
-@@ -1125,6 +1134,62 @@ out_release_res:
- return err;
- }
-
-+static void __maybe_unused advk_pcie_disable_phy(struct advk_pcie *pcie)
-+{
-+ phy_power_off(pcie->phy);
-+ phy_exit(pcie->phy);
-+}
-+
-+static int advk_pcie_enable_phy(struct advk_pcie *pcie)
-+{
-+ int ret;
-+
-+ if (!pcie->phy)
-+ return 0;
-+
-+ ret = phy_init(pcie->phy);
-+ if (ret)
-+ return ret;
-+
-+ ret = phy_set_mode(pcie->phy, PHY_MODE_PCIE);
-+ if (ret) {
-+ phy_exit(pcie->phy);
-+ return ret;
-+ }
-+
-+ ret = phy_power_on(pcie->phy);
-+ if (ret) {
-+ phy_exit(pcie->phy);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int advk_pcie_setup_phy(struct advk_pcie *pcie)
-+{
-+ struct device *dev = &pcie->pdev->dev;
-+ struct device_node *node = dev->of_node;
-+ int ret = 0;
-+
-+ pcie->phy = devm_of_phy_get(dev, node, NULL);
-+ if (IS_ERR(pcie->phy) && (PTR_ERR(pcie->phy) == -EPROBE_DEFER))
-+ return PTR_ERR(pcie->phy);
-+
-+ /* Old bindings miss the PHY handle */
-+ if (IS_ERR(pcie->phy)) {
-+ dev_warn(dev, "PHY unavailable (%ld)\n", PTR_ERR(pcie->phy));
-+ pcie->phy = NULL;
-+ return 0;
-+ }
-+
-+ ret = advk_pcie_enable_phy(pcie);
-+ if (ret)
-+ dev_err(dev, "Failed to initialize PHY (%d)\n", ret);
-+
-+ return ret;
-+}
-+
- static int advk_pcie_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-@@ -1182,6 +1247,10 @@ static int advk_pcie_probe(struct platfo
- else
- pcie->link_gen = ret;
-
-+ ret = advk_pcie_setup_phy(pcie);
-+ if (ret)
-+ return ret;
-+
- advk_pcie_setup_hw(pcie);
-
- ret = advk_sw_pci_bridge_init(pcie);
diff --git a/target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch b/target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch
deleted file mode 100644
index dd75470b4d..0000000000
--- a/target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 715878016984b2617f6c1f177c50039e12e7bd5b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun at nic.cz>
-Date: Thu, 30 Apr 2020 10:06:23 +0200
-Subject: [PATCH] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio
- function
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-We found out that we are unable to control the PERST# signal via the
-default pin dedicated to be PERST# pin (GPIO2[3] pin) on A3700 SOC when
-this pin is in EP_PCIE1_Resetn mode. There is a register in the PCIe
-register space called PERSTN_GPIO_EN (D0088004[3]), but changing the
-value of this register does not change the pin output when measuring
-with voltmeter.
-
-We do not know if this is a bug in the SOC, or if it works only when
-PCIe controller is in a certain state.
-
-Commit f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready
-before training link") says that when this pin changes pinctrl mode
-from EP_PCIE1_Resetn to GPIO, the PERST# signal is asserted for a brief
-moment.
-
-So currently the situation is that on A3700 boards the PERST# signal is
-asserted in U-Boot (because the code in U-Boot issues reset via this pin
-via GPIO mode), and then in Linux by the obscure and undocumented
-mechanism described by the above mentioned commit.
-
-We want to issue PERST# signal in a known way, therefore this patch
-changes the pcie_reset_pin function from "pcie" to "gpio" and adds the
-reset-gpios property to the PCIe node in device tree files of
-EspressoBin and Armada 3720 Dev Board (Turris Mox device tree already
-has this property and uDPU does not have a PCIe port).
-
-Signed-off-by: Marek Behún <marek.behun at nic.cz>
-Cc: Remi Pommarel <repk at triplefau.lt>
-Tested-by: Tomasz Maciej Nowak <tmn505 at gmail.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 3 +++
- arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 +
- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 4 ----
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +-
- 4 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
-@@ -128,6 +128,9 @@
-
- /* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
- &pcie0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
-+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- status = "okay";
- };
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -59,6 +59,7 @@
- phys = <&comphy1 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
-+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- };
-
- /* J6 */
---- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-@@ -127,10 +127,6 @@
- };
- };
-
--&pcie_reset_pins {
-- function = "gpio";
--};
--
- &pcie0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -318,7 +318,7 @@
-
- pcie_reset_pins: pcie-reset-pins {
- groups = "pcie1";
-- function = "pcie";
-+ function = "gpio";
- };
-
- pcie_clkreq_pins: pcie-clkreq-pins {
diff --git a/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch b/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch
deleted file mode 100644
index b851a39a39..0000000000
--- a/target/linux/mvebu/patches-5.4/021-arm64-dts-marvell-armada-37xx-Move-PCIe-comphy-handl.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From df749cdb015011e9ed8b60ebb84b4e76a9f35735 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun at nic.cz>
-Date: Thu, 30 Apr 2020 10:06:24 +0200
-Subject: [PATCH] arm64: dts: marvell: armada-37xx: Move PCIe comphy handle
- property
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move the comphy handle property of the PCIe node from board specific
-device tree files (EspressoBin and Turris Mox) to the generic
-armada-37xx.dtsi.
-
-This is correct since this is the only possible PCIe PHY configuration
-on Armada 37xx, so when PCIe is enabled on any board, this handle is
-correct.
-
-Signed-off-by: Marek Behún <marek.behun at nic.cz>
-Tested-by: Tomasz Maciej Nowak <tmn505 at gmail.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi | 1 -
- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 -
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
- 3 files changed, 1 insertion(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -56,7 +56,6 @@
- /* J9 */
- &pcie0 {
- status = "okay";
-- phys = <&comphy1 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
- reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
---- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-@@ -133,7 +133,6 @@
- status = "okay";
- max-link-speed = <2>;
- reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
-- phys = <&comphy1 0>;
-
- /* enabled by U-Boot if PCIe module is present */
- status = "disabled";
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -494,6 +494,7 @@
- <0 0 0 2 &pcie_intc 1>,
- <0 0 0 3 &pcie_intc 2>,
- <0 0 0 4 &pcie_intc 3>;
-+ phys = <&comphy1 0>;
- pcie_intc: interrupt-controller {
- interrupt-controller;
- #interrupt-cells = <1>;
diff --git a/target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch b/target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch
deleted file mode 100644
index 4442a5ac15..0000000000
--- a/target/linux/mvebu/patches-5.4/022-arm64-dts-marvell-armada-37xx-Move-PCIe-max-link-spe.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 1b5a2dd9e266d78d5fddd7e6b116e47ba9577b5e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali at kernel.org>
-Date: Thu, 30 Apr 2020 10:06:25 +0200
-Subject: [PATCH] arm64: dts: marvell: armada-37xx: Move PCIe max-link-speed
- property
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move the max-link-speed property of the PCIe node from board specific
-device tree files to the generic armada-37xx.dtsi.
-
-Armada 37xx supports only PCIe gen2 speed so max-link-speed property
-should be in the generic armada-37xx.dtsi file.
-
-Signed-off-by: Pali Rohár <pali at kernel.org>
-Tested-by: Tomasz Maciej Nowak <tmn505 at gmail.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 -
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
- 2 files changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
-@@ -131,7 +131,6 @@
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
- status = "okay";
-- max-link-speed = <2>;
- reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
-
- /* enabled by U-Boot if PCIe module is present */
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -494,6 +494,7 @@
- <0 0 0 2 &pcie_intc 1>,
- <0 0 0 3 &pcie_intc 2>,
- <0 0 0 4 &pcie_intc 3>;
-+ max-link-speed = <2>;
- phys = <&comphy1 0>;
- pcie_intc: interrupt-controller {
- interrupt-controller;
diff --git a/target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch b/target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch
deleted file mode 100644
index 818fce85a8..0000000000
--- a/target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 11b2af36cc874027ce701c5784cb957c99c7de3d Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel at armlinux.org.uk>
-Date: Wed, 6 May 2020 10:40:37 +0100
-Subject: [PATCH] arm64: dts: add uDPU i2c bus recovery
-
-Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew at lunn.ch>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- .../boot/dts/marvell/armada-3720-uDPU.dts | 22 +++++++++++++++++--
- 1 file changed, 20 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -117,18 +117,36 @@
- };
- };
-
-+&pinctrl_nb {
-+ i2c1_recovery_pins: i2c1-recovery-pins {
-+ groups = "i2c1";
-+ function = "gpio";
-+ };
-+
-+ i2c2_recovery_pins: i2c2-recovery-pins {
-+ groups = "i2c2";
-+ function = "gpio";
-+ };
-+};
-+
- &i2c0 {
- status = "okay";
-- pinctrl-names = "default";
-+ pinctrl-names = "default", "recovery";
- pinctrl-0 = <&i2c1_pins>;
-+ pinctrl-1 = <&i2c1_recovery_pins>;
- /delete-property/mrvl,i2c-fast-mode;
-+ scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+ sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- };
-
- &i2c1 {
- status = "okay";
-- pinctrl-names = "default";
-+ pinctrl-names = "default", "recovery";
- pinctrl-0 = <&i2c2_pins>;
-+ pinctrl-1 = <&i2c2_recovery_pins>;
- /delete-property/mrvl,i2c-fast-mode;
-+ scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+ sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
- lm75 at 48 {
- status = "okay";
diff --git a/target/linux/mvebu/patches-5.4/024-PCI-aardvark-Don-t-touch-PCIe-registers-if-no-card-c.patch b/target/linux/mvebu/patches-5.4/024-PCI-aardvark-Don-t-touch-PCIe-registers-if-no-card-c.patch
deleted file mode 100644
index 04803c90d8..0000000000
--- a/target/linux/mvebu/patches-5.4/024-PCI-aardvark-Don-t-touch-PCIe-registers-if-no-card-c.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 70e380250c3621c55ff218cbaf2272830d9dbb1d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali at kernel.org>
-Date: Thu, 2 Jul 2020 10:30:36 +0200
-Subject: [PATCH] PCI: aardvark: Don't touch PCIe registers if no card
- connected
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When there is no PCIe card connected and advk_pcie_rd_conf() or
-advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated
-root bridge, the aardvark driver throws the following error message:
-
- advk-pcie d0070000.pcie: config read/write timed out
-
-Obviously accessing PCIe registers of disconnected card is not possible.
-
-Extend check in advk_pcie_valid_device() function for validating
-availability of PCIe bus. If PCIe link is down, then the device is marked
-as Not Found and the driver does not try to access these registers.
-
-This is just an optimization to prevent accessing PCIe registers when card
-is disconnected. Trying to access PCIe registers of disconnected card does
-not cause any crash, kernel just needs to wait for a timeout. So if card
-disappear immediately after checking for PCIe link (before accessing PCIe
-registers), it does not cause any problems.
-
-Link: https://lore.kernel.org/r/20200702083036.12230-1-pali@kernel.org
-Signed-off-by: Pali Rohár <pali at kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
----
- drivers/pci/controller/pci-aardvark.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -650,6 +650,13 @@ static bool advk_pcie_valid_device(struc
- if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
- return false;
-
-+ /*
-+ * If the link goes down after we check for link-up, nothing bad
-+ * happens but the config access times out.
-+ */
-+ if (bus->number != pcie->root_bus_nr && !advk_pcie_link_up(pcie))
-+ return false;
-+
- return true;
- }
-
diff --git a/target/linux/mvebu/patches-5.4/025-power-reset-add-driver-for-LinkStation-power-off.patch b/target/linux/mvebu/patches-5.4/025-power-reset-add-driver-for-LinkStation-power-off.patch
deleted file mode 100644
index 64ea26559e..0000000000
--- a/target/linux/mvebu/patches-5.4/025-power-reset-add-driver-for-LinkStation-power-off.patch
+++ /dev/null
@@ -1,207 +0,0 @@
-From a7f79f99541eff4e6bcae0014eb08d3019337565 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Daniel=20Gonz=C3=A1lez=20Cabanelas?= <dgcbueu at gmail.com>
-Date: Wed, 15 Jul 2020 15:35:14 +0200
-Subject: [PATCH] power: reset: add driver for LinkStation power off
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some Buffalo LinkStations perform the power off operation, at restart
-time, depending on the state of an output pin (LED2/INTn) at the ethernet
-PHY. This pin is also used to wake the machine when a WoL packet is
-received by the PHY.
-
-The driver is required by the Buffalo LinkStation LS421DE (ARM MVEBU),
-and other models. Without it, the board remains forever halted if a
-power off command is executed, unless the PSU is disconnected and
-connected again.
-
-Add the driver to provide the power off function and also make the WoL
-feature to be available.
-
-Signed-off-by: Daniel González Cabanelas <dgcbueu at gmail.com>
-Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
----
- drivers/power/reset/Kconfig | 11 ++
- drivers/power/reset/Makefile | 1 +
- drivers/power/reset/linkstation-poweroff.c | 136 +++++++++++++++++++++
- 3 files changed, 148 insertions(+)
- create mode 100644 drivers/power/reset/linkstation-poweroff.c
-
---- a/drivers/power/reset/Kconfig
-+++ b/drivers/power/reset/Kconfig
-@@ -99,6 +99,17 @@ config POWER_RESET_HISI
- help
- Reboot support for Hisilicon boards.
-
-+config POWER_RESET_LINKSTATION
-+ tristate "Buffalo LinkStation power-off driver"
-+ depends on ARCH_MVEBU || COMPILE_TEST
-+ depends on OF_MDIO && PHYLIB
-+ help
-+ This driver supports turning off some Buffalo LinkStations by
-+ setting an output pin at the ethernet PHY to the correct state.
-+ It also makes the device compatible with the WoL function.
-+
-+ Say Y here if you have a Buffalo LinkStation LS421D/E.
-+
- config POWER_RESET_MSM
- bool "Qualcomm MSM power-off driver"
- depends on ARCH_QCOM
---- a/drivers/power/reset/Makefile
-+++ b/drivers/power/reset/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_POWER_RESET_GEMINI_POWEROFF
- obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
- obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
- obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
-+obj-${CONFIG_POWER_RESET_LINKSTATION} += linkstation-poweroff.o
- obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
- obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
- obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
---- /dev/null
-+++ b/drivers/power/reset/linkstation-poweroff.c
-@@ -0,0 +1,144 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * LinkStation power off restart driver
-+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu at gmail.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/notifier.h>
-+#include <linux/of.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_platform.h>
-+#include <linux/reboot.h>
-+#include <linux/phy.h>
-+
-+/* Defines from the eth phy Marvell driver */
-+#define MII_MARVELL_COPPER_PAGE 0
-+#define MII_MARVELL_LED_PAGE 3
-+#define MII_MARVELL_WOL_PAGE 17
-+#define MII_MARVELL_PHY_PAGE 22
-+
-+#define MII_PHY_LED_CTRL 16
-+#define MII_88E1318S_PHY_LED_TCR 18
-+#define MII_88E1318S_PHY_WOL_CTRL 16
-+#define MII_M1011_IEVENT 19
-+
-+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
-+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
-+#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
-+#define LED2_FORCE_ON (0x8 << 8)
-+#define LEDMASK GENMASK(11,8)
-+
-+static struct phy_device *phydev;
-+
-+static void mvphy_reg_intn(u16 data)
-+{
-+ int rc = 0, saved_page;
-+
-+ saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
-+ if (saved_page < 0)
-+ goto err;
-+
-+ /* Force manual LED2 control to let INTn work */
-+ __phy_modify(phydev, MII_PHY_LED_CTRL, LEDMASK, LED2_FORCE_ON);
-+
-+ /* Set the LED[2]/INTn pin to the required state */
-+ __phy_modify(phydev, MII_88E1318S_PHY_LED_TCR,
-+ MII_88E1318S_PHY_LED_TCR_FORCE_INT,
-+ MII_88E1318S_PHY_LED_TCR_INTn_ENABLE | data);
-+
-+ if (!data) {
-+ /* Clear interrupts to ensure INTn won't be holded in high state */
-+ __phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_COPPER_PAGE);
-+ __phy_read(phydev, MII_M1011_IEVENT);
-+
-+ /* If WOL was enabled and a magic packet was received before powering
-+ * off, we won't be able to wake up by sending another magic packet.
-+ * Clear WOL status.
-+ */
-+ __phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE);
-+ __phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
-+ MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
-+ }
-+err:
-+ rc = phy_restore_page(phydev, saved_page, rc);
-+ if (rc < 0)
-+ dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
-+
-+ if (!data) {
-+ /* Slow down the PHY to save energy */
-+ rc= phy_speed_down(phydev, false);
-+ if (rc < 0)
-+ dev_err(&phydev->mdio.dev, "PHY speed down failed, %d\n", rc);
-+ }
-+}
-+
-+static int linkstation_reboot_notifier(struct notifier_block *nb,
-+ unsigned long action, void *unused)
-+{
-+ if (action == SYS_RESTART)
-+ mvphy_reg_intn(MII_88E1318S_PHY_LED_TCR_FORCE_INT);
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block linkstation_reboot_nb = {
-+ .notifier_call = linkstation_reboot_notifier,
-+};
-+
-+static void linkstation_poweroff(void)
-+{
-+ unregister_reboot_notifier(&linkstation_reboot_nb);
-+ mvphy_reg_intn(0);
-+
-+ kernel_restart("Power off");
-+}
-+
-+static const struct of_device_id ls_poweroff_of_match[] = {
-+ { .compatible = "buffalo,ls421d" },
-+ { .compatible = "buffalo,ls421de" },
-+ { },
-+};
-+
-+static int __init linkstation_poweroff_init(void)
-+{
-+ struct mii_bus *bus;
-+ struct device_node *dn;
-+
-+ dn = of_find_matching_node(NULL, ls_poweroff_of_match);
-+ if (!dn)
-+ return -ENODEV;
-+ of_node_put(dn);
-+
-+ dn = of_find_node_by_name(NULL, "mdio");
-+ if (!dn)
-+ return -ENODEV;
-+
-+ bus = of_mdio_find_bus(dn);
-+ of_node_put(dn);
-+ if (!bus)
-+ return -EPROBE_DEFER;
-+
-+ phydev = phy_find_first(bus);
-+ if (!phydev)
-+ return -EPROBE_DEFER;
-+
-+ register_reboot_notifier(&linkstation_reboot_nb);
-+ pm_power_off = linkstation_poweroff;
-+
-+ pr_info("LinkStation power off driver registered\n");
-+ return 0;
-+}
-+
-+static void __exit linkstation_poweroff_exit(void)
-+{
-+ pm_power_off = NULL;
-+ unregister_reboot_notifier(&linkstation_reboot_nb);
-+}
-+
-+module_init(linkstation_poweroff_init);
-+module_exit(linkstation_poweroff_exit);
-+
-+MODULE_AUTHOR("Daniel González Cabanelas <dgcbueu at gmail.com>");
-+MODULE_DESCRIPTION("LinkStation power off driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch b/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch
deleted file mode 100644
index ff67c9c02f..0000000000
--- a/target/linux/mvebu/patches-5.4/026-PCI-aardvark-Fix-initialization-with-old-Marvell-s-A.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From b0c6ae0f8948a2be6bf4e8b4bbab9ca1343289b6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali at kernel.org>
-Date: Wed, 2 Sep 2020 16:43:44 +0200
-Subject: [PATCH] PCI: aardvark: Fix initialization with old Marvell's Arm
- Trusted Firmware
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Old ATF automatically power on pcie phy and does not provide SMC call for
-phy power on functionality which leads to aardvark initialization failure:
-
-[ 0.330134] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware
-[ 0.338846] phy phy-d0018300.phy.1: phy poweron failed --> -95
-[ 0.344753] advk-pcie d0070000.pcie: Failed to initialize PHY (-95)
-[ 0.351160] advk-pcie: probe of d0070000.pcie failed with error -95
-
-This patch fixes above failure by ignoring 'not supported' error in
-aardvark driver. In this case it is expected that phy is already power on.
-
-Tested-by: Tomasz Maciej Nowak <tmn505 at gmail.com>
-Link: https://lore.kernel.org/r/20200902144344.16684-3-pali@kernel.org
-Fixes: 366697018c9a ("PCI: aardvark: Add PHY support")
-Signed-off-by: Pali Rohár <pali at kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
-Reviewed-by: Rob Herring <robh at kernel.org>
-Cc: <stable at vger.kernel.org> # 5.8+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno
----
- drivers/pci/controller/pci-aardvark.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -1165,7 +1165,9 @@ static int advk_pcie_enable_phy(struct a
- }
-
- ret = phy_power_on(pcie->phy);
-- if (ret) {
-+ if (ret == -EOPNOTSUPP) {
-+ dev_warn(&pcie->pdev->dev, "PHY unsupported by firmware\n");
-+ } else if (ret) {
- phy_exit(pcie->phy);
- return ret;
- }
diff --git a/target/linux/mvebu/patches-5.4/027-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch b/target/linux/mvebu/patches-5.4/027-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch
deleted file mode 100644
index 927670d8b3..0000000000
--- a/target/linux/mvebu/patches-5.4/027-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From b64d814257b027e29a474bcd660f6372490138c7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali at kernel.org>
-Date: Mon, 7 Sep 2020 13:27:17 +0200
-Subject: [PATCH] arm64: dts: marvell: espressobin: Add ethernet switch aliases
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Espressobin boards have 3 ethernet ports and some of them got assigned more
-then one MAC address. MAC addresses are stored in U-Boot environment.
-
-Since commit a2c7023f7075c ("net: dsa: read mac address from DT for slave
-device") kernel can use MAC addresses from DT for particular DSA port.
-
-Currently Espressobin DTS file contains alias just for ethernet0.
-
-This patch defines additional ethernet aliases in Espressobin DTS files, so
-bootloader can fill correct MAC address for DSA switch ports if more MAC
-addresses were specified.
-
-DT alias ethernet1 is used for wan port, DT aliases ethernet2 and ethernet3
-are used for lan ports for both Espressobin revisions (V5 and V7).
-
-Fixes: 5253cb8c00a6f ("arm64: dts: marvell: espressobin: add ethernet alias")
-Cc: <stable at vger.kernel.org> # a2c7023f7075c: dsa: read mac address
-Signed-off-by: Pali Rohár <pali at kernel.org>
-Reviewed-by: Andrew Lunn <andrew at lunn.ch>
-Reviewed-by: Andre Heider <a.heider at gmail.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- .../dts/marvell/armada-3720-espressobin-v7-emmc.dts | 10 ++++++++--
- .../boot/dts/marvell/armada-3720-espressobin-v7.dts | 10 ++++++++--
- 3 files changed, 24 insertions(+), 8 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
-@@ -15,16 +15,22 @@
- compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
- "globalscale,espressobin", "marvell,armada3720",
- "marvell,armada3710";
-+
-+ aliases {
-+ /* ethernet1 is wan port */
-+ ethernet1 = &switch0port3;
-+ ethernet3 = &switch0port1;
-+ };
- };
-
- &ports {
-- port at 1 {
-+ switch0port1: port at 1 {
- reg = <1>;
- label = "lan1";
- phy-handle = <&switch0phy0>;
- };
-
-- port at 3 {
-+ switch0port3: port at 3 {
- reg = <3>;
- label = "wan";
- phy-handle = <&switch0phy2>;
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
-@@ -14,16 +14,22 @@
- model = "Globalscale Marvell ESPRESSOBin Board V7";
- compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
- "marvell,armada3720", "marvell,armada3710";
-+
-+ aliases {
-+ /* ethernet1 is wan port */
-+ ethernet1 = &switch0port3;
-+ ethernet3 = &switch0port1;
-+ };
- };
-
- &ports {
-- port at 1 {
-+ switch0port1: port at 1 {
- reg = <1>;
- label = "lan1";
- phy-handle = <&switch0phy0>;
- };
-
-- port at 3 {
-+ switch0port3: port at 3 {
- reg = <3>;
- label = "wan";
- phy-handle = <&switch0phy2>;
diff --git a/target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch b/target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
deleted file mode 100644
index c3abae60a6..0000000000
--- a/target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505 at gmail.com>
-Date: Tue, 10 Nov 2020 16:38:31 +0100
-Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED
-
-With board revision 1.3, SolidRun moved the power LED to the middle of
-the board. In old place of power LED a GPIO controllable heartbeat LED
-was added. This commit only touches Single Shot variant, since only this
-variant is all revision 1.3.
-
-Note:
-This is slightly modified patch. Some boards could be placed in an
-enclosure, so the LED18 is enabled by default, since that'll be the only
-visible indicator that the board is operating.
-
-Reported-by: Alexandra Alth <alexandra at alth.de>
-Signed-off-by: Tomasz Maciej Nowak <tmn505 at gmail.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- .../marvell/armada-8040-mcbin-singleshot.dts | 22 +++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-@@ -5,6 +5,8 @@
- * Device Tree file for MACCHIATOBin Armada 8040 community board platform
- */
-
-+#include <dt-bindings/leds/common.h>
-+
- #include "armada-8040-mcbin.dtsi"
-
- / {
-@@ -12,6 +14,20 @@
- compatible = "marvell,armada8040-mcbin-singleshot",
- "marvell,armada8040-mcbin", "marvell,armada8040",
- "marvell,armada-ap806-quad", "marvell,armada-ap806";
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&cp0_led18_pins>;
-+ pinctrl-names = "default";
-+
-+ led18 {
-+ gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>;
-+ function = LED_FUNCTION_HEARTBEAT;
-+ color = <LED_COLOR_ID_GREEN>;
-+ linux,default-trigger = "heartbeat";
-+ default-state = "on";
-+ };
-+ };
- };
-
- &cp0_eth0 {
-@@ -27,3 +43,10 @@
- managed = "in-band-status";
- sfp = <&sfp_eth1>;
- };
-+
-+&cp0_pinctrl {
-+ cp0_led18_pins: led18-pins {
-+ marvell,pins = "mpp33";
-+ marvell,function = "gpio";
-+ };
-+};
diff --git a/target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-enable-HW-buffer-management.patch b/target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-enable-HW-buffer-management.patch
deleted file mode 100644
index 7a4b511998..0000000000
--- a/target/linux/mvebu/patches-5.4/029-ARM-dts-turris-omnia-enable-HW-buffer-management.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 018b88eee1a2efda26ed2f09aab33ccdc40ef18f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
-Date: Sun, 15 Nov 2020 14:59:17 +0100
-Subject: ARM: dts: turris-omnia: enable HW buffer management
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The buffer manager is available on Turris Omnia but needs to be
-described in device-tree to be used.
-
-Signed-off-by: Marek Behún <kabel at kernel.org>
-Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
-Cc: linux-arm-kernel at lists.infradead.org
-Cc: Uwe Kleine-König <uwe at kleine-koenig.org>
-Cc: Jason Cooper <jason at lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement at bootlin.com>
-Cc: Andreas Färber <afaerber at suse.de>
-Cc: Andrew Lunn <andrew at lunn.ch>
-Cc: Rob Herring <robh+dt at kernel.org>
-Cc: devicetree at vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
-(limited to 'arch/arm/boot/dts/armada-385-turris-omnia.dts')
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -84,12 +84,23 @@
- };
- };
-
-+&bm {
-+ status = "okay";
-+};
-+
-+&bm_bppi {
-+ status = "okay";
-+};
-+
- /* Connected to 88E6176 switch, port 6 */
- ð0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ge0_rgmii_pins>;
- status = "okay";
- phy-mode = "rgmii";
-+ buffer-manager = <&bm>;
-+ bm,pool-long = <0>;
-+ bm,pool-short = <3>;
-
- fixed-link {
- speed = <1000>;
-@@ -103,6 +114,9 @@
- pinctrl-0 = <&ge1_rgmii_pins>;
- status = "okay";
- phy-mode = "rgmii";
-+ buffer-manager = <&bm>;
-+ bm,pool-long = <1>;
-+ bm,pool-short = <3>;
-
- fixed-link {
- speed = <1000>;
-@@ -115,6 +129,9 @@
- status = "okay";
- phy-mode = "sgmii";
- phy = <&phy1>;
-+ buffer-manager = <&bm>;
-+ bm,pool-long = <2>;
-+ bm,pool-short = <3>;
- };
-
- &i2c0 {
diff --git a/target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch b/target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch
deleted file mode 100644
index 99ed07e13b..0000000000
--- a/target/linux/mvebu/patches-5.4/030-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 9ec25ef84832209a8326f9a71fe3ba14f4bcf301 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
-Date: Sun, 15 Nov 2020 14:59:18 +0100
-Subject: ARM: dts: turris-omnia: add comphy handle to eth2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The eth2 controller on Turris Omnia is connected to SerDes. For SFP to
-be able to switch between 1G and 2.5G modes the comphy link has to be
-defined.
-
-Signed-off-by: Marek Behún <kabel at kernel.org>
-Fixes: f3a6a9f3704a ("ARM: dts: add description for Armada 38x ...")
-Reviewed-by: Andrew Lunn <andrew at lunn.ch>
-Reviewed-by: Andreas Färber <afaerber at suse.de>
-Cc: linux-arm-kernel at lists.infradead.org
-Cc: Uwe Kleine-König <uwe at kleine-koenig.org>
-Cc: Jason Cooper <jason at lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement at bootlin.com>
-Cc: Rob Herring <robh+dt at kernel.org>
-Cc: devicetree at vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -129,6 +129,7 @@
- status = "okay";
- phy-mode = "sgmii";
- phy = <&phy1>;
-+ phys = <&comphy5 2>;
- buffer-manager = <&bm>;
- bm,pool-long = <2>;
- bm,pool-short = <3>;
diff --git a/target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-describe-switch-interrupt.patch b/target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-describe-switch-interrupt.patch
deleted file mode 100644
index 4bbd80aac4..0000000000
--- a/target/linux/mvebu/patches-5.4/031-ARM-dts-turris-omnia-describe-switch-interrupt.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From d29b67c220caf5f4905e1f1576e71bcb6de4af9e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
-Date: Sun, 15 Nov 2020 14:59:19 +0100
-Subject: ARM: dts: turris-omnia: describe switch interrupt
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Describe switch interrupt for Turris Omnia so that the CPU does not have
-to poll the switch. We also need to to set mpp45 pin to gpio function
-for this.
-
-Signed-off-by: Marek Behún <kabel at kernel.org>
-Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
-Cc: linux-arm-kernel at lists.infradead.org
-Cc: Uwe Kleine-König <uwe at kleine-koenig.org>
-Cc: Jason Cooper <jason at lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement at bootlin.com>
-Cc: Andreas Färber <afaerber at suse.de>
-Cc: Andrew Lunn <andrew at lunn.ch>
-Cc: Rob Herring <robh+dt at kernel.org>
-Cc: devicetree at vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 12 +++++++++++-
- 1 file changed, 11 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -261,13 +261,18 @@
-
- /* Switch MV88E6176 at address 0x10 */
- switch at 10 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&swint_pins>;
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
-- dsa,member = <0 0>;
-
-+ dsa,member = <0 0>;
- reg = <0x10>;
-
-+ interrupt-parent = <&gpio1>;
-+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
-+
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-@@ -320,6 +325,11 @@
- marvell,function = "gpio";
- };
-
-+ swint_pins: swint-pins {
-+ marvell,pins = "mpp45";
-+ marvell,function = "gpio";
-+ };
-+
- spi0cs0_pins: spi0cs0-pins {
- marvell,pins = "mpp25";
- marvell,function = "spi0";
diff --git a/target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-SFP-node.patch b/target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-SFP-node.patch
deleted file mode 100644
index 2447a4e240..0000000000
--- a/target/linux/mvebu/patches-5.4/032-ARM-dts-turris-omnia-add-SFP-node.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From add2d65962977caf23ca2fa21a2457d31b636574 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
-Date: Mon, 16 Nov 2020 13:24:22 +0100
-Subject: ARM: dts: turris-omnia: add SFP node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Turris Omnia has an SFP cage that, together with WAN PHY, is connected
-to eth2 SerDes via a SerDes multiplexor. When a SFP module is present,
-the multiplexor switches the SerDes signal from PHY to SFP.
-
-Describe the SFP cage, but leave it disabled. Until phylink has support
-for such configuration, we are leaving it to U-Boot to enable SFP and
-disable WAN PHY at boot time depending on whether a SFP module is
-present.
-
-Signed-off-by: Marek Behún <kabel at kernel.org>
-Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
-Reviewed-by: Andrew Lunn <andrew at lunn.ch>
-Cc: Russell King - ARM Linux admin <linux at armlinux.org.uk>
-Cc: linux-arm-kernel at lists.infradead.org
-Cc: Uwe Kleine-König <uwe at kleine-koenig.org>
-Cc: Jason Cooper <jason at lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement at bootlin.com>
-Cc: Andreas Färber <afaerber at suse.de>
-Cc: Rob Herring <robh+dt at kernel.org>
-Cc: devicetree at vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 30 ++++++++++++++++++++++++++-
- 1 file changed, 29 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -82,6 +82,24 @@
- };
- };
- };
-+
-+ sfp: sfp {
-+ compatible = "sff,sfp";
-+ i2c-bus = <&sfp_i2c>;
-+ tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
-+ tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
-+ rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
-+ los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
-+ mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
-+ maximum-power-milliwatt = <3000>;
-+
-+ /*
-+ * For now this has to be enabled at boot time by U-Boot when
-+ * a SFP module is present. Read more in the comment in the
-+ * eth2 node below.
-+ */
-+ status = "disabled";
-+ };
- };
-
- &bm {
-@@ -126,10 +144,20 @@
-
- /* WAN port */
- ð2 {
-+ /*
-+ * eth2 is connected via a multiplexor to both the SFP cage and to
-+ * ethernet-phy at 1. The multiplexor switches the signal to SFP cage when
-+ * a SFP module is present, as determined by the mode-def0 GPIO.
-+ *
-+ * Until kernel supports this configuration properly, in case SFP module
-+ * is present, U-Boot has to enable the sfp node above, remove phy
-+ * handle and add managed = "in-band-status" property.
-+ */
- status = "okay";
- phy-mode = "sgmii";
- phy = <&phy1>;
- phys = <&comphy5 2>;
-+ sfp = <&sfp>;
- buffer-manager = <&bm>;
- bm,pool-long = <2>;
- bm,pool-short = <3>;
-@@ -195,7 +223,7 @@
- /* routed to PCIe2 connector (CN62A) */
- };
-
-- i2c at 4 {
-+ sfp_i2c: i2c at 4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
diff --git a/target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch b/target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch
deleted file mode 100644
index 5ceef5dc46..0000000000
--- a/target/linux/mvebu/patches-5.4/033-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 8ee4a5f4f40da60bb85e13d9dd218a3c9197e3e3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel at kernel.org>
-Date: Sun, 15 Nov 2020 14:59:22 +0100
-Subject: ARM: dts: turris-omnia: update ethernet-phy node and handle name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use property name `phy-handle` instead of the deprecated `phy` to
-connect eth2 to the PHY.
-Rename the node from "phy at 1" to "ethernet-phy at 1", since "phy at 1" is
-incorrect according to device-tree bindings documentation.
-Also remove the "ethernet-phy-id0141.0DD1" compatible string, it is not
-needed. Kernel can read the PHY identifier itself.
-
-Signed-off-by: Marek Behún <kabel at kernel.org>
-Reviewed-by: Andrew Lunn <andrew at lunn.ch>
-Cc: linux-arm-kernel at lists.infradead.org
-Cc: Uwe Kleine-König <uwe at kleine-koenig.org>
-Cc: Jason Cooper <jason at lakedaemon.net>
-Cc: Gregory CLEMENT <gregory.clement at bootlin.com>
-Cc: Andreas Färber <afaerber at suse.de>
-Cc: Rob Herring <robh+dt at kernel.org>
-Cc: devicetree at vger.kernel.org
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -155,7 +155,7 @@
- */
- status = "okay";
- phy-mode = "sgmii";
-- phy = <&phy1>;
-+ phy-handle = <&phy1>;
- phys = <&comphy5 2>;
- sfp = <&sfp>;
- buffer-manager = <&bm>;
-@@ -278,9 +278,9 @@
- pinctrl-0 = <&mdio_pins>;
- status = "okay";
-
-- phy1: phy at 1 {
-+ phy1: ethernet-phy at 1 {
- status = "okay";
-- compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
-+ compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- marvell,reg-init = <3 18 0 0x4985>;
-
diff --git a/target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch b/target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch
deleted file mode 100644
index 4283a61341..0000000000
--- a/target/linux/mvebu/patches-5.4/034-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 5b2c7e0ae762fff2b172caf16b2766cc3e1ad859 Mon Sep 17 00:00:00 2001
-From: Rui Salvaterra <rsalvaterra at gmail.com>
-Date: Wed, 17 Feb 2021 15:30:38 +0000
-Subject: ARM: dts: turris-omnia: fix hardware buffer management
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Hardware buffer management has never worked on the Turris Omnia, as the
-required MBus window hadn't been reserved. Fix thusly.
-
-Fixes: 018b88eee1a2 ("ARM: dts: turris-omnia: enable HW buffer management")
-
-Signed-off-by: Rui Salvaterra <rsalvaterra at gmail.com>
-Reviewed-by: Marek Behún <kabel at kernel.org>
-Tested-by: Klaus Kudielka <klaus.kudielka at gmail.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
----
- arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
-+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
-@@ -31,7 +31,8 @@
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
-+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
- internal-regs {
-
diff --git a/target/linux/mvebu/patches-5.4/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/mvebu/patches-5.4/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch
deleted file mode 100644
index fd60cdb322..0000000000
--- a/target/linux/mvebu/patches-5.4/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch
+++ /dev/null
@@ -1,208 +0,0 @@
-From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
-From: Adrian Panella <ianchi74 at outlook.com>
-Date: Thu, 9 Mar 2017 09:37:17 +0100
-Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
-
-The command-line arguments provided by the boot loader will be
-appended to a new device tree property: bootloader-args.
-If there is a property "append-rootblock" in DT under /chosen
-and a root= option in bootloaders command line it will be parsed
-and added to DT bootargs with the form: <append-rootblock>XX.
-Only command line ATAG will be processed, the rest of the ATAGs
-sent by bootloader will be ignored.
-This is usefull in dual boot systems, to get the current root partition
-without afecting the rest of the system.
-
-Signed-off-by: Adrian Panella <ianchi74 at outlook.com>
-
-This patch has been modified to be mvebu specific. The original patch
-did not pass the bootloader cmdline on if no append-rootblock stanza
-was found, resulting in blank cmdline and failure to boot.
-
-Signed-off-by: Michael Gray <michael.gray at lantisproject.com>
----
- arch/arm/Kconfig | 11 ++++
- arch/arm/boot/compressed/atags_to_fdt.c | 85 ++++++++++++++++++++++++-
- init/main.c | 16 +++++
- 3 files changed, 111 insertions(+), 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1827,6 +1827,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
- The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
-
-+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ bool "Append rootblock parsing bootloader's kernel arguments"
-+ help
-+ The command-line arguments provided by the boot loader will be
-+ appended to a new device tree property: bootloader-args.
-+ If there is a property "append-rootblock" in DT under /chosen
-+ and a root= option in bootloaders command line it will be parsed
-+ and added to DT bootargs with the form: <append-rootblock>XX.
-+ Only command line ATAG will be processed, the rest of the ATAGs
-+ sent by bootloader will be ignored.
-+
- endchoice
-
- config CMDLINE
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -4,6 +4,8 @@
-
- #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
- #define do_extend_cmdline 1
-+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#define do_extend_cmdline 1
- #else
- #define do_extend_cmdline 0
- #endif
-@@ -67,6 +69,72 @@ static uint32_t get_cell_size(const void
- return cell_size;
- }
-
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+
-+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
-+{
-+ char *ptr, *end;
-+ char *root="root=";
-+ int i, l;
-+ const char *rootblock;
-+
-+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
-+ ptr = str - 1;
-+
-+ do {
-+ //first find an 'r' at the begining or after a space
-+ do {
-+ ptr++;
-+ ptr = strchr(ptr, 'r');
-+ if (!ptr)
-+ goto no_append;
-+
-+ } while (ptr != str && *(ptr-1) != ' ');
-+
-+ //then check for the rest
-+ for(i = 1; i <= 4; i++)
-+ if(*(ptr+i) != *(root+i)) break;
-+
-+ } while (i != 5);
-+
-+ end = strchr(ptr, ' ');
-+ end = end ? (end - 1) : (strchr(ptr, 0) - 1);
-+
-+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
-+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
-+ ptr = end + 1;
-+
-+ /* if append-rootblock property is set use it to append to command line */
-+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
-+ if (rootblock == NULL)
-+ goto no_append;
-+
-+ if (*dest != ' ') {
-+ *dest = ' ';
-+ dest++;
-+ len++;
-+ }
-+
-+ if (len + l + i <= COMMAND_LINE_SIZE) {
-+ memcpy(dest, rootblock, l);
-+ dest += l - 1;
-+ memcpy(dest, ptr, i);
-+ dest += i;
-+ }
-+
-+ return dest;
-+
-+no_append:
-+ len = strlen(str);
-+ if (len + 1 < COMMAND_LINE_SIZE) {
-+ memcpy(dest, str, len);
-+ dest += len;
-+ }
-+
-+ return dest;
-+}
-+#endif
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- char cmdline[COMMAND_LINE_SIZE];
-@@ -86,12 +154,21 @@ static void merge_fdt_bootargs(void *fdt
-
- /* and append the ATAG_CMDLINE */
- if (fdt_cmdline) {
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //save original bootloader args
-+ //and append ubi.mtd with root partition number to current cmdline
-+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
-+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
-+
-+#else
- len = strlen(fdt_cmdline);
- if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- *ptr++ = ' ';
- memcpy(ptr, fdt_cmdline, len);
- ptr += len;
- }
-+#endif
- }
- *ptr = '\0';
-
-@@ -166,7 +243,9 @@ int atags_to_fdt(void *atag_list, void *
- else
- setprop_string(fdt, "/chosen", "bootargs",
- atag->u.cmdline.cmdline);
-- } else if (atag->hdr.tag == ATAG_MEM) {
-+ }
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ else if (atag->hdr.tag == ATAG_MEM) {
- if (memcount >= sizeof(mem_reg_property)/4)
- continue;
- if (!atag->u.mem.size)
-@@ -210,6 +289,10 @@ int atags_to_fdt(void *atag_list, void *
- setprop(fdt, "/memory", "reg", mem_reg_property,
- 4 * memcount * memsize);
- }
-+#else
-+
-+ }
-+#endif
-
- return fdt_pack(fdt);
- }
---- a/init/main.c
-+++ b/init/main.c
-@@ -104,6 +104,10 @@
- #define CREATE_TRACE_POINTS
- #include <trace/events/initcall.h>
-
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#include <linux/of.h>
-+#endif
-+
- static int kernel_init(void *);
-
- extern void init_IRQ(void);
-@@ -631,6 +635,18 @@ asmlinkage __visible void __init start_k
- page_alloc_init();
-
- pr_notice("Kernel command line: %s\n", boot_command_line);
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //Show bootloader's original command line for reference
-+ if(of_chosen) {
-+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
-+ if(prop)
-+ pr_notice("Bootloader command line (ignored): %s\n", prop);
-+ else
-+ pr_notice("Bootloader command line not present\n");
-+ }
-+#endif
-+
- /* parameters may set static keys */
- jump_label_init();
- parse_early_param();
diff --git a/target/linux/mvebu/patches-5.4/301-mvebu-armada-38x-enable-libata-leds.patch b/target/linux/mvebu/patches-5.4/301-mvebu-armada-38x-enable-libata-leds.patch
deleted file mode 100644
index b8ab700c97..0000000000
--- a/target/linux/mvebu/patches-5.4/301-mvebu-armada-38x-enable-libata-leds.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/mach-mvebu/Kconfig
-+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -69,6 +69,7 @@ config MACH_ARMADA_38X
- select HAVE_SMP
- select MACH_MVEBU_V7
- select PINCTRL_ARMADA_38X
-+ select ARCH_WANT_LIBATA_LEDS
- help
- Say 'Y' here if you want your kernel to support boards based
- on the Marvell Armada 380/385 SoC with device tree.
diff --git a/target/linux/mvebu/patches-5.4/302-add_powertables.patch b/target/linux/mvebu/patches-5.4/302-add_powertables.patch
deleted file mode 100644
index efbbbc7d78..0000000000
--- a/target/linux/mvebu/patches-5.4/302-add_powertables.patch
+++ /dev/null
@@ -1,770 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -212,11 +212,19 @@
- &pcie1 {
- /* Marvell 88W8864, 5GHz-only */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,2ghz = <0>;
-+ };
- };
-
- &pcie2 {
- /* Marvell 88W8864, 2GHz-only */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,5ghz = <0>;
-+ };
- };
-
- &pinctrl {
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -142,3 +142,205 @@
- };
- };
- };
-+
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <2 2>;
-+ marvell,powertable {
-+ AU =
-+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>;
-+ CA =
-+ <36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+ CN =
-+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>;
-+ ETSI =
-+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>;
-+ FCC =
-+ <36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+ };
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <2 2>;
-+ marvell,powertable {
-+ AU =
-+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+ CA =
-+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>,
-+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>;
-+ CN =
-+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+ ETSI =
-+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+ FCC =
-+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -142,3 +142,205 @@
- };
- };
- };
-+
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+ CA =
-+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ CN =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+ ETSI =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+ FCC =
-+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ };
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ CA =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ CN =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ ETSI =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ FCC =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-@@ -142,3 +142,205 @@
- };
- };
- };
-+
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+ CA =
-+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ CN =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+ ETSI =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+ FCC =
-+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ };
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ CA =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ CN =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ ETSI =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ FCC =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
-@@ -157,6 +157,18 @@
- };
- };
-
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ };
-+};
-+
- &sdhci {
- pinctrl-names = "default";
- pinctrl-0 = <&sdhci_pins>;
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -225,12 +225,100 @@
- pcie at 2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,5ghz = <0>;
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ FCC =
-+ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>;
-+
-+ ETSI =
-+ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
- };
-
- /* Second mini-PCIe port */
- pcie at 3,0 {
- /* Port 0, Lane 3 */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,2ghz = <0>;
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ FCC =
-+ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>;
-+
-+ ETSI =
-+ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>;
-+ };
-+ };
- };
- };
-
diff --git a/target/linux/mvebu/patches-5.4/303-linksys_hardcode_nand_ecc_settings.patch b/target/linux/mvebu/patches-5.4/303-linksys_hardcode_nand_ecc_settings.patch
deleted file mode 100644
index 89a5e19803..0000000000
--- a/target/linux/mvebu/patches-5.4/303-linksys_hardcode_nand_ecc_settings.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-Newer Linksys boards might come with a Winbond W29N02GV which can be
-configured in different ways. Make sure we configure it the same way
-as the older chips so everything keeps working.
-
-Signed-off-by: Imre Kaloz <kaloz at openwrt.org>
-
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -148,6 +148,8 @@
- reg = <0>;
- label = "pxa3xx_nand-0";
- nand-rb = <0>;
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- };
diff --git a/target/linux/mvebu/patches-5.4/304-revert_i2c_delay.patch b/target/linux/mvebu/patches-5.4/304-revert_i2c_delay.patch
deleted file mode 100644
index 930c0f9494..0000000000
--- a/target/linux/mvebu/patches-5.4/304-revert_i2c_delay.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -237,12 +237,10 @@
- };
-
- &i2c0 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11000 0x100>;
- };
-
- &i2c1 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11100 0x100>;
- };
-
diff --git a/target/linux/mvebu/patches-5.4/305-armada-385-rd-mtd-partitions.patch b/target/linux/mvebu/patches-5.4/305-armada-385-rd-mtd-partitions.patch
deleted file mode 100644
index 31bd53b1f3..0000000000
--- a/target/linux/mvebu/patches-5.4/305-armada-385-rd-mtd-partitions.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/arm/boot/dts/armada-388-rd.dts
-+++ b/arch/arm/boot/dts/armada-388-rd.dts
-@@ -103,6 +103,16 @@
- compatible = "st,m25p128", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
-+
-+ partition at 0 {
-+ label = "uboot";
-+ reg = <0 0x400000>;
-+ };
-+
-+ partition at 1 {
-+ label = "firmware";
-+ reg = <0x400000 0xc00000>;
-+ };
- };
- };
-
diff --git a/target/linux/mvebu/patches-5.4/306-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-5.4/306-ARM-mvebu-385-ap-Add-partitions.patch
deleted file mode 100644
index 2057e31c7e..0000000000
--- a/target/linux/mvebu/patches-5.4/306-ARM-mvebu-385-ap-Add-partitions.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard at free-electrons.com>
-Date: Tue, 13 Jan 2015 11:14:09 +0100
-Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
-
-Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
----
- arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm/boot/dts/armada-385-db-ap.dts
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -218,19 +218,19 @@
- #size-cells = <1>;
-
- partition at 0 {
-- label = "U-Boot";
-+ label = "u-boot";
- reg = <0x00000000 0x00800000>;
- read-only;
- };
-
- partition at 800000 {
-- label = "uImage";
-+ label = "kernel";
- reg = <0x00800000 0x00400000>;
- read-only;
- };
-
- partition at c00000 {
-- label = "Root";
-+ label = "ubi";
- reg = <0x00c00000 0x3f400000>;
- };
- };
diff --git a/target/linux/mvebu/patches-5.4/307-armada-xp-linksys-mamba-broken-idle.patch b/target/linux/mvebu/patches-5.4/307-armada-xp-linksys-mamba-broken-idle.patch
deleted file mode 100644
index 16112d53fc..0000000000
--- a/target/linux/mvebu/patches-5.4/307-armada-xp-linksys-mamba-broken-idle.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -485,3 +485,7 @@
- };
- };
- };
-+
-+&coherencyfab {
-+ broken-idle;
-+};
diff --git a/target/linux/mvebu/patches-5.4/308-armada-xp-linksys-mamba-wan.patch b/target/linux/mvebu/patches-5.4/308-armada-xp-linksys-mamba-wan.patch
deleted file mode 100644
index 4315abc7d2..0000000000
--- a/target/linux/mvebu/patches-5.4/308-armada-xp-linksys-mamba-wan.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -387,7 +387,7 @@
-
- port at 4 {
- reg = <4>;
-- label = "internet";
-+ label = "wan";
- };
-
- port at 5 {
diff --git a/target/linux/mvebu/patches-5.4/309-linksys-status-led.patch b/target/linux/mvebu/patches-5.4/309-linksys-status-led.patch
deleted file mode 100644
index e5e83572c9..0000000000
--- a/target/linux/mvebu/patches-5.4/309-linksys-status-led.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -14,6 +14,13 @@
- compatible = "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
-
-+ aliases {
-+ led-boot = &led_power;
-+ led-failsafe = &led_power;
-+ led-running = &led_power;
-+ led-upgrade = &led_power;
-+ };
-+
- chosen {
- stdout-path = "serial0:115200n8";
- };
-@@ -71,7 +78,7 @@
- pinctrl-0 = <&gpio_leds_pins>;
- pinctrl-names = "default";
-
-- power {
-+ led_power: power {
- gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -26,6 +26,13 @@
- compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
- "marvell,armadaxp", "marvell,armada-370-xp";
-
-+ aliases {
-+ led-boot = &led_power;
-+ led-failsafe = &led_power;
-+ led-running = &led_power;
-+ led-upgrade = &led_power;
-+ };
-+
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart0;
-@@ -197,7 +204,7 @@
- pinctrl-0 = <&power_led_pin>;
- pinctrl-names = "default";
-
-- power {
-+ led_power: power {
- label = "mamba:white:power";
- gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- default-state = "on";
diff --git a/target/linux/mvebu/patches-5.4/310-linksys-use-eth0-as-cpu-port.patch b/target/linux/mvebu/patches-5.4/310-linksys-use-eth0-as-cpu-port.patch
deleted file mode 100644
index 84d49a004b..0000000000
--- a/target/linux/mvebu/patches-5.4/310-linksys-use-eth0-as-cpu-port.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -116,7 +116,7 @@
- };
-
- ð2 {
-- status = "okay";
-+ status = "disabled";
- phy-mode = "sgmii";
- buffer-manager = <&bm>;
- bm,pool-long = <2>;
-@@ -200,10 +200,10 @@
- label = "wan";
- };
-
-- port at 5 {
-- reg = <5>;
-+ port at 6 {
-+ reg = <6>;
- label = "cpu";
-- ethernet = <ð2>;
-+ ethernet = <ð0>;
-
- fixed-link {
- speed = <1000>;
diff --git a/target/linux/mvebu/patches-5.4/311-adjust-compatible-for-linksys.patch b/target/linux/mvebu/patches-5.4/311-adjust-compatible-for-linksys.patch
deleted file mode 100644
index a5d3e63810..0000000000
--- a/target/linux/mvebu/patches-5.4/311-adjust-compatible-for-linksys.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
-@@ -12,8 +12,8 @@
-
- / {
- model = "Linksys WRT3200ACM";
-- compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
-- "marvell,armada380";
-+ compatible = "linksys,wrt3200acm", "linksys,rango", "linksys,armada385",
-+ "marvell,armada385", "marvell,armada380";
- };
-
- &expander0 {
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -22,9 +22,10 @@
- #include "armada-xp-mv78230.dtsi"
-
- / {
-- model = "Linksys WRT1900AC";
-- compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
-- "marvell,armadaxp", "marvell,armada-370-xp";
-+ model = "Linksys WRT1900AC v1";
-+ compatible = "linksys,wrt1900ac-v1", "linksys,mamba",
-+ "marvell,armadaxp-mv78230", "marvell,armadaxp",
-+ "marvell,armada-370-xp";
-
- aliases {
- led-boot = &led_power;
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -9,8 +9,9 @@
- #include "armada-385-linksys.dtsi"
-
- / {
-- model = "Linksys WRT1900ACv2";
-- compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
-+ model = "Linksys WRT1900AC v2";
-+ compatible = "linksys,wrt1900ac-v2", "linksys,cobra",
-+ "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
- };
-
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -10,8 +10,8 @@
-
- / {
- model = "Linksys WRT1200AC";
-- compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
-- "marvell,armada380";
-+ compatible = "linksys,wrt1200ac", "linksys,caiman", "linksys,armada385",
-+ "marvell,armada385", "marvell,armada380";
- };
-
- &expander0 {
---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-@@ -10,7 +10,8 @@
-
- / {
- model = "Linksys WRT1900ACS";
-- compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
-+ compatible = "linksys,wrt1900acs", "linksys,shelby",
-+ "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
- };
-
diff --git a/target/linux/mvebu/patches-5.4/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch b/target/linux/mvebu/patches-5.4/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
deleted file mode 100644
index dd2bef7f63..0000000000
--- a/target/linux/mvebu/patches-5.4/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 8137da20701c776ad3481115305a5e8e410871ba Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel at armlinux.org.uk>
-Date: Tue, 29 Nov 2016 10:15:45 +0000
-Subject: ARM: dts: armada388-clearfog: emmc on clearfog base
-
-Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
----
- arch/arm/boot/dts/armada-388-clearfog-base.dts | 1 +
- .../dts/armada-38x-solidrun-microsom-emmc.dtsi | 62 ++++++++++++++++++++++
- 2 files changed, 63 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-
---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
-@@ -7,6 +7,7 @@
-
- /dts-v1/;
- #include "armada-388-clearfog.dtsi"
-+#include "armada-38x-solidrun-microsom-emmc.dtsi"
-
- / {
- model = "SolidRun Clearfog Base A1";
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-@@ -0,0 +1,62 @@
-+/*
-+ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC
-+ *
-+ * Copyright (C) 2015 Russell King
-+ *
-+ * This board is in development; the contents of this file work with
-+ * the A1 rev 2.0 of the board, which does not represent final
-+ * production board. Things will change, don't expect this file to
-+ * remain compatible info the future.
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+/ {
-+ soc {
-+ internal-regs {
-+ sdhci at d8000 {
-+ bus-width = <4>;
-+ no-1-8-v;
-+ non-removable;
-+ pinctrl-0 = <µsom_sdhci_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ wp-inverted;
-+ };
-+ };
-+ };
-+};
diff --git a/target/linux/mvebu/patches-5.4/312-helios4-dts-status-led-alias.patch b/target/linux/mvebu/patches-5.4/312-helios4-dts-status-led-alias.patch
deleted file mode 100644
index b837989d48..0000000000
--- a/target/linux/mvebu/patches-5.4/312-helios4-dts-status-led-alias.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/arm/boot/dts/armada-388-helios4.dts
-+++ b/arch/arm/boot/dts/armada-388-helios4.dts
-@@ -24,6 +24,10 @@
- aliases {
- /* So that mvebu u-boot can update the MAC addresses */
- ethernet1 = ð0;
-+ led-boot = &led_status;
-+ led-failsafe = &led_status;
-+ led-running = &led_status;
-+ led-upgrade = &led_status;
- };
-
- chosen {
-@@ -73,10 +77,9 @@
- pinctrl-names = "default";
- pinctrl-0 = <&helios_system_led_pins>;
-
-- status-led {
-+ led_status: status-led {
- label = "helios4:green:status";
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "heartbeat";
- default-state = "on";
- };
-
diff --git a/target/linux/mvebu/patches-5.4/314-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch b/target/linux/mvebu/patches-5.4/314-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
deleted file mode 100644
index e989f59d5c..0000000000
--- a/target/linux/mvebu/patches-5.4/314-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From be893f672e340b56ca60f2f6c32fdd713a5852f5 Mon Sep 17 00:00:00 2001
-From: Kevin Mihelich <kevin at archlinuxarm.org>
-Date: Tue, 4 Jul 2017 19:25:28 -0600
-Subject: arm64: dts: marvell: armada37xx: Add eth0 alias
-
-Signed-off-by: Kevin Mihelich <kevin at archlinuxarm.org>
----
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -18,6 +18,7 @@
- #size-cells = <2>;
-
- aliases {
-+ ethernet0 = ð0;
- serial0 = &uart0;
- serial1 = &uart1;
- };
diff --git a/target/linux/mvebu/patches-5.4/315-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch b/target/linux/mvebu/patches-5.4/315-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
deleted file mode 100644
index a741e378d9..0000000000
--- a/target/linux/mvebu/patches-5.4/315-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 6ea9a1ee9367fb35acff1c08a0dc4213ff4687a0 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505 at gmail.com>
-Date: Tue, 9 Apr 2019 15:53:42 +0200
-Subject: [PATCH] arm64: dts: marvell: armada-3720-espressobin: add ports
- phandle
-
-Instead of referencing the whole mdio node, add ports phandle to adjust
-port labels in dts for different hardware iterations of ESPRESSObin
-boards.
-
-Signed-off-by: Tomasz Maciej Nowak <tmn505 at gmail.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -147,7 +147,7 @@
-
- dsa,member = <0 0>;
-
-- ports {
-+ ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
diff --git a/target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch b/target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch
deleted file mode 100644
index 2240d0b39e..0000000000
--- a/target/linux/mvebu/patches-5.4/316-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-Certain SFP modules (most notably Nokia GPON ones) first check
-connectivity on 1000base-x, and switch to 2500base-x afterwards. This
-is considered a quirk so the phylink switches the interface to
-2500base-x as well.
-
-However, after power-cycling the uDPU device, network interface/SFP module
-will not work correctly until the module is re-seated. This patch
-resolves this issue by forcing the interface to be brought up in
-2500base-x mode by default.
-
-Signed-off-by: Jakov Petrina <jakov.petrina at sartura.hr>
-Signed-off-by: Vladimir Vid <vladimir.vid at sartura.hr>
-Cc: Luka Perkov <luka.perkov at sartura.hr>
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -162,7 +162,7 @@
- };
-
- ð0 {
-- phy-mode = "sgmii";
-+ phy-mode = "2500base-x";
- status = "okay";
- managed = "in-band-status";
- phys = <&comphy1 0>;
-@@ -170,7 +170,7 @@
- };
-
- ð1 {
-- phy-mode = "sgmii";
-+ phy-mode = "2500base-x";
- status = "okay";
- managed = "in-band-status";
- phys = <&comphy0 1>;
diff --git a/target/linux/mvebu/patches-5.4/318-armada-xp-linksys-mamba-resize-kernel.patch b/target/linux/mvebu/patches-5.4/318-armada-xp-linksys-mamba-resize-kernel.patch
deleted file mode 100644
index f1fddceff4..0000000000
--- a/target/linux/mvebu/patches-5.4/318-armada-xp-linksys-mamba-resize-kernel.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 258233f00bcd013050efee00c5d9128ef8cd62dd Mon Sep 17 00:00:00 2001
-From: Tad <tad at spotco.us>
-Date: Fri, 5 Feb 2021 22:32:11 -0500
-Subject: [PATCH] ARM: dts: armada-xp-linksys-mamba: Increase kernel
- partition to 4MB
-
-Signed-off-by: Tad Davanzo <tad at spotco.us>
----
- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -456,9 +456,9 @@
- reg = <0xa00000 0x2800000>; /* 40MB */
- };
-
-- partition at d00000 {
-+ partition at e00000 {
- label = "rootfs1";
-- reg = <0xd00000 0x2500000>; /* 37MB */
-+ reg = <0xe00000 0x2400000>; /* 36MB */
- };
-
- /* kernel2 overlaps with rootfs2 by design */
-@@ -467,9 +467,9 @@
- reg = <0x3200000 0x2800000>; /* 40MB */
- };
-
-- partition at 3500000 {
-+ partition at 3600000 {
- label = "rootfs2";
-- reg = <0x3500000 0x2500000>; /* 37MB */
-+ reg = <0x3600000 0x2400000>; /* 36MB */
- };
-
- /*
diff --git a/target/linux/mvebu/patches-5.4/320-armada-370-dts-fix-crypto-engine.patch b/target/linux/mvebu/patches-5.4/320-armada-370-dts-fix-crypto-engine.patch
deleted file mode 100644
index 19378870ef..0000000000
--- a/target/linux/mvebu/patches-5.4/320-armada-370-dts-fix-crypto-engine.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -234,7 +234,7 @@
- clocks = <&gateclk 23>;
- clock-names = "cesa0";
- marvell,crypto-srams = <&crypto_sram>;
-- marvell,crypto-sram-size = <0x7e0>;
-+ marvell,crypto-sram-size = <0x800>;
- };
- };
-
-@@ -255,12 +255,17 @@
- * cpuidle workaround.
- */
- idle-sram at 0 {
-+ status = "disabled";
- reg = <0x0 0x20>;
- };
- };
- };
- };
-
-+&coherencyfab {
-+ broken-idle;
-+};
-+
- /*
- * Default UART pinctrl setting without RTS/CTS, can be overwritten on
- * board level if a different configuration is used.
diff --git a/target/linux/mvebu/patches-5.4/400-find_active_root.patch b/target/linux/mvebu/patches-5.4/400-find_active_root.patch
deleted file mode 100644
index 65c43740fc..0000000000
--- a/target/linux/mvebu/patches-5.4/400-find_active_root.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz at openwrt.org>
-
---- a/drivers/mtd/parsers/ofpart_core.c
-+++ b/drivers/mtd/parsers/ofpart_core.c
-@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d
- return of_get_property(pp, "compatible", NULL);
- }
-
-+static int mangled_rootblock;
-+
- static int parse_fixed_partitions(struct mtd_info *master,
- const struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
-@@ -48,6 +50,7 @@ static int parse_fixed_partitions(struct
- struct device_node *mtd_node;
- struct device_node *ofpart_node;
- const char *partname;
-+ const char *owrtpart = "ubi";
- struct device_node *pp;
- int nr_parts, i, ret = 0;
- bool dedicated = true;
-@@ -133,9 +136,13 @@ static int parse_fixed_partitions(struct
- parts[i].size = of_read_number(reg + a_cells, s_cells);
- parts[i].of_node = pp;
-
-- partname = of_get_property(pp, "label", &len);
-- if (!partname)
-- partname = of_get_property(pp, "name", &len);
-+ if (mangled_rootblock && (i == mangled_rootblock)) {
-+ partname = owrtpart;
-+ } else {
-+ partname = of_get_property(pp, "label", &len);
-+ if (!partname)
-+ partname = of_get_property(pp, "name", &len);
-+ }
- parts[i].name = partname;
-
- if (of_get_property(pp, "read-only", &len))
-@@ -249,6 +256,18 @@ static int __init ofpart_parser_init(voi
- return 0;
- }
-
-+static int __init active_root(char *str)
-+{
-+ get_option(&str, &mangled_rootblock);
-+
-+ if (!mangled_rootblock)
-+ return 1;
-+
-+ return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/mvebu/patches-5.4/700-mvneta-tx-queue-workaround.patch b/target/linux/mvebu/patches-5.4/700-mvneta-tx-queue-workaround.patch
deleted file mode 100644
index 201864eef1..0000000000
--- a/target/linux/mvebu/patches-5.4/700-mvneta-tx-queue-workaround.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-The hardware queue scheduling is apparently configured with fixed
-priorities, which creates a nasty fairness issue where traffic from one
-CPU can starve traffic from all other CPUs.
-
-Work around this issue by forcing all tx packets to go through one CPU,
-until this issue is fixed properly.
-
-Signed-off-by: Felix Fietkau <nbd at nbd.name>
----
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4691,6 +4691,16 @@ static int mvneta_ethtool_set_eee(struct
- return phylink_ethtool_set_eee(pp->phylink, eee);
- }
-
-+#ifndef CONFIG_ARM64
-+static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
-+ struct net_device *sb_dev)
-+{
-+ /* XXX: hardware queue scheduling is broken,
-+ * use only one queue until it is fixed */
-+ return 0;
-+}
-+#endif
-+
- static const struct net_device_ops mvneta_netdev_ops = {
- .ndo_open = mvneta_open,
- .ndo_stop = mvneta_stop,
-@@ -4701,6 +4711,9 @@ static const struct net_device_ops mvnet
- .ndo_fix_features = mvneta_fix_features,
- .ndo_get_stats64 = mvneta_get_stats64,
- .ndo_do_ioctl = mvneta_ioctl,
-+#ifndef CONFIG_ARM64
-+ .ndo_select_queue = mvneta_select_queue,
-+#endif
- .ndo_bpf = mvneta_xdp,
- .ndo_xdp_xmit = mvneta_xdp_xmit,
- };
diff --git a/target/linux/mvebu/patches-5.4/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch b/target/linux/mvebu/patches-5.4/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
deleted file mode 100644
index 29f36be460..0000000000
--- a/target/linux/mvebu/patches-5.4/800-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From c28b2d367da8a471482e6a4aa8337ab6369a80c2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel at arm.linux.org.uk>
-Date: Sat, 3 Oct 2015 09:13:05 +0100
-Subject: cpuidle: mvebu: indicate failure to enter deeper sleep states
-
-The cpuidle ->enter method expects the return value to be the sleep
-state we entered. Returning negative numbers or other codes is not
-permissible since coupled CPU idle was merged.
-
-At least some of the mvebu_v7_cpu_suspend() implementations return the
-value from cpu_suspend(), which returns zero if the CPU vectors back
-into the kernel via cpu_resume() (the success case), or the non-zero
-return value of the suspend actor, or one (failure cases).
-
-We do not want to be returning the failure case value back to CPU idle
-as that indicates that we successfully entered one of the deeper idle
-states. Always return zero instead, indicating that we slept for the
-shortest amount of time.
-
-Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
----
- drivers/cpuidle/cpuidle-mvebu-v7.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/cpuidle/cpuidle-mvebu-v7.c
-+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
-@@ -39,8 +39,12 @@ static int mvebu_v7_enter_idle(struct cp
- ret = mvebu_v7_cpu_suspend(deepidle);
- cpu_pm_exit();
-
-+ /*
-+ * If we failed to enter the desired state, indicate that we
-+ * slept lightly.
-+ */
- if (ret)
-- return ret;
-+ return 0;
-
- return index;
- }
diff --git a/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch b/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch
deleted file mode 100644
index 49ea3de0d1..0000000000
--- a/target/linux/mvebu/patches-5.4/801-pci-mvebu-time-out-reset-on-link-up.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 287b9df160b6159f8d385424904f8bac501280c1 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel at armlinux.org.uk>
-Date: Sat, 9 Jul 2016 10:58:16 +0100
-Subject: pci: mvebu: time out reset on link up
-
-If the port reports that the link is up while we are resetting, there's
-little point in waiting for the full duration.
-
-Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
----
- drivers/pci/controller/pci-mvebu.c | 20 ++++++++++++++------
- 1 file changed, 14 insertions(+), 6 deletions(-)
-
---- a/drivers/pci/controller/pci-mvebu.c
-+++ b/drivers/pci/controller/pci-mvebu.c
-@@ -936,6 +936,7 @@ static int mvebu_pcie_powerup(struct mve
-
- if (port->reset_gpio) {
- u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
-+ unsigned int i;
-
- of_property_read_u32(port->dn, "reset-delay-us",
- &reset_udelay);
-@@ -943,7 +944,13 @@ static int mvebu_pcie_powerup(struct mve
- udelay(100);
-
- gpiod_set_value_cansleep(port->reset_gpio, 0);
-- msleep(reset_udelay / 1000);
-+ for (i = 0; i < reset_udelay; i += 1000) {
-+ if (mvebu_pcie_link_up(port))
-+ break;
-+ msleep(1);
-+ }
-+
-+ printk("%s: reset completed in %dus\n", port->name, i);
- }
-
- return 0;
-@@ -1107,15 +1114,16 @@ static int mvebu_pcie_probe(struct platf
- if (!child)
- continue;
-
-- ret = mvebu_pcie_powerup(port);
-- if (ret < 0)
-- continue;
--
- port->base = mvebu_pcie_map_registers(pdev, child, port);
- if (IS_ERR(port->base)) {
- dev_err(dev, "%s: cannot map registers\n", port->name);
- port->base = NULL;
-- mvebu_pcie_powerdown(port);
-+ continue;
-+ }
-+
-+ ret = mvebu_pcie_powerup(port);
-+ if (ret < 0) {
-+ port->base = NULL;
- continue;
- }
-
--
2.33.0
More information about the openwrt-devel
mailing list