[PATCH 1/6] realtek: fix link-state interrupt

[Bjørn Mork]

This bug was the root cause for the failing sfp driver.

Signed-off-by: Bjørn Mork <bjorn at mork.no>
---
 .../realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c     | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c
index 698f2892ea1e..197a96f8ad13 100644
--- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c
+++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c
@@ -555,7 +555,6 @@ static int __init rtl83xx_sw_probe(struct platform_device *pdev)
 	int err = 0, i;
 	struct rtl838x_switch_priv *priv;
 	struct device *dev = &pdev->dev;
-	u64 irq_mask;
 	u64 bpdu_mask;
 
 	pr_debug("Probing RTL838X switch device\n");
@@ -650,9 +649,9 @@ static int __init rtl83xx_sw_probe(struct platform_device *pdev)
 
 	/* Enable link and media change interrupts. Are the SERDES masks needed? */
 	sw_w32_mask(0, 3, priv->r->isr_glb_src);
-	
-	priv->r->set_port_reg_le(irq_mask, priv->r->isr_port_link_sts_chg);
-	priv->r->set_port_reg_le(irq_mask, priv->r->imr_port_link_sts_chg);
+
+	priv->r->set_port_reg_le(priv->irq_mask, priv->r->isr_port_link_sts_chg);
+	priv->r->set_port_reg_le(priv->irq_mask, priv->r->imr_port_link_sts_chg);
 
 	priv->link_state_irq = platform_get_irq(pdev, 0);
 	pr_info("LINK state irq: %d\n", priv->link_state_irq);
-- 
2.20.1