[19.07.7] failed to sysupgrade the newifi router

[Michael Richardson]

zhengfish <zhengfish at gmail.com> wrote:
    > Hello, Guys Today I build one image for newifi router using 19.07.7
    > release.  However while I try to reflash the router, it fails.

    >    Seems it cannot read one key, I don't know what's this key?  And how
    > to correct it?

It means that the image is signed by a key that your device does not recognize.
The possibilities are:

  1) your current image was self-built, and did not include the release keys
  2) your new image was self-built, and did not include the release keys.
  3) some other failure.

If you are self-building, then you should ahve the public key you can copy
over.  I think that sysupgrade also an option to skip the check, but I can't
double check that from my laptop at the moment.

--
]               Never tell me the odds!                 | ipv6 mesh networks [
]   Michael Richardson, Sandelman Software Works        |    IoT architect   [
]     mcr at sandelman.ca  http://www.sandelman.ca/        |   ruby on rails    [

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 487 bytes
Desc: not available
URL: <http://lists.openwrt.org/pipermail/openwrt-devel/attachments/20210624/a436b9e5/attachment.sig>