[PATCH 1/3] base-files: failsafe: Fix IP configuration

[Paul Spooren]

Not sure but is this PR related?

"base-files: bring up vlan interface too #2734"

https://github.com/openwrt/openwrt/pull/2734

On 6/19/21 8:36 AM, Hauke Mehrtens wrote:
> Adapt the preinit_config_board() to the board.json network changes. It
> now looks for the device and the ports variables to configure the LAN
> network.
>
> This works with swconfig configurations.
>
> Fixes: FS#3866
> Fixes: d42640e389a8 ("base-files: use "ports" array in board.json network for bridges")
> Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
> ---
>   .../files/lib/preinit/10_indicate_preinit      | 18 ++++++++++++------
>   1 file changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/package/base-files/files/lib/preinit/10_indicate_preinit b/package/base-files/files/lib/preinit/10_indicate_preinit
> index 3c5992979016..ae9fcfecc89e 100644
> --- a/package/base-files/files/lib/preinit/10_indicate_preinit
> +++ b/package/base-files/files/lib/preinit/10_indicate_preinit
> @@ -72,28 +72,34 @@ preinit_config_board() {
>   
>   	json_select network
>   		json_select "lan"
> -			json_get_vars ifname
> +			json_get_vars device
> +			json_get_values ports ports
>   		json_select ..
>   	json_select ..
>   
> -	[ -n "$ifname" ] || return
> +	[ -n "$device" -o -n "$ports" ] || return
> +
> +	# swconfig uses $device and DSA uses ports
> +	[ -z "$ports" ] && {
> +		ports="$device"
> +	}
>   
>   	# only use the first one
> -	ifname=${ifname%% *}
> +	ports=${ports%% *}
>   
>   	if [ -x /sbin/swconfig ]; then
>   		# configure the switch, if present
>   
>   		json_get_keys keys switch
>   		for key in $keys; do
> -			preinit_config_switch $key $ifname
> +			preinit_config_switch $key $ports
>   		done
>   	else
>   		# trim any vlan ids
> -		ifname=${ifname%\.*}
> +		ports=${ports%\.*}
>   	fi
>   
> -	pi_ifname=$ifname
> +	pi_ifname=$ports
>   
>   	preinit_ip_config $pi_ifname
>   }