[PATCH v2] ipq806x: fix LAN and WAN port assignments on TP-Link AD7200

[Alex Henrie]

LAN port 4 was swapped with the WAN port and the remaining three LAN
ports were numbered in reverse order from their labels on the case.

Fixes: 1a775a4fd033 ("ipq806x: add support for TP-Link Talon AD7200")
Signed-off-by: Alex Henrie <alexhenrie24 at gmail.com>
---
v2: Explicitly assign desired port numbers.
---
 target/linux/ipq806x/base-files/etc/board.d/02_network | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index abdab89857..3ed3db94fc 100644
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -56,7 +56,6 @@ nec,wg2600hp3)
 		"2:lan" "3:lan" "4:lan" "5:lan" "0 at eth1" "1:wan" "6 at eth0"
 	;;
 netgear,r7800 |\
-tplink,ad7200 |\
 tplink,c2600)
 	ucidef_add_switch "switch0" \
 		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6 at eth1" "5:wan" "0 at eth0"
@@ -71,6 +70,10 @@ qcom,ipq8064-db149)
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "6u at eth1" "5:wan" "0u at eth0"
 	;;
+tplink,ad7200)
+	ucidef_add_switch "switch0" \
+		"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6 at eth1" "1:wan" "0 at eth0"
+	;;
 ubnt,unifi-ac-hd)
 	ucidef_set_interface_lan "eth0 eth1"
 	;;
-- 
2.31.1