[PATCH v4] gemini: Bring up DSA switches

[Linus Walleij]

First group the interfaces on the DSA switch into the
right LAN/WAN groups. Tested successfully on the
D-Link DIR-685 with the RTL8366RB DSA switch.

The RTL8366RB is DSA custom tagged and now handled
by the kernel tag parser. (Backported.)

The Vitesse switches are not capable of supporting
DSA per-port tagging. We suspect they must be handled
using some custom VLAN set-up.

Cc: Pawel Dembicki <paweldembicki at gmail.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
ChangeLog v3->v4:
- Rebased patch.
- This now works as expected on the D-Link DIR-685
  with the upstream DSA patches.
- For the Vitesse routers
  I don't know what to do, but it should be "something
  like this" eventually. I think it looks better with
  this script than without it actually.
ChangeLog v2->v3:
- Actually remove the eth1 from the lan list as well on
  the Gemini SL93512r.
ChangeLog v1->v2:
- Remove the eth1 from the LAN bridge in both the
  Vitesse switch devices, instead bring up each ethernet
  master interface independently with "none" protocol.
---
 .../gemini/base-files/etc/board.d/02_network  | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100755 target/linux/gemini/base-files/etc/board.d/02_network

diff --git a/target/linux/gemini/base-files/etc/board.d/02_network b/target/linux/gemini/base-files/etc/board.d/02_network
new file mode 100755
index 000000000000..e2fce015fb44
--- /dev/null
+++ b/target/linux/gemini/base-files/etc/board.d/02_network
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+storlink,gemini324)
+	# These are all connected to eth1 thru VSC7385
+	ucidef_set_interface "eth" ifname "eth1" protocol "none"
+	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
+	;;
+itian,sq201)
+	# These are all connected to eth1 thru VSC7395
+	ucidef_set_interface "eth" ifname "eth1" protocol "none"
+	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0"
+	;;
+dlink,dir-685)
+	# These are all connected to eth0 thru RTL8366RB
+	ucidef_set_interface "eth" ifname "eth0" protocol "none"
+	ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan"
+	;;
+esac
+
+board_config_flush
+
+exit 0
-- 
2.26.2