[PATCH v1 2/4] uqmi: set device-operating-mode to online

[Filip Moc]

This is required for LTE module MR400 (in TL-MR6400 v4).
Otherwise LTE module won't register to GSM network.

Signed-off-by: Filip Moc <lede at moc6.cz>
---
 package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
index 7870eb7382..dbfcdcb098 100755
--- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
+++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
@@ -174,6 +174,9 @@ proto_qmi_setup() {
 	# Cleanup current state if any
 	uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect > /dev/null 2>&1
 
+	# Go online
+	uqmi -s -d "$device" --set-device-operating-mode online > /dev/null 2>&1
+
 	# Set IP format
 	uqmi -s -d "$device" --set-data-format 802.3 > /dev/null 2>&1
 	uqmi -s -d "$device" --wda-set-data-format 802.3 > /dev/null 2>&1
-- 
2.28.0