[OpenWrt-Devel] [PATCH v3] ath79/nand: add support for Netgear WNDR4300SW
mail at adrianschmutzler.de
mail at adrianschmutzler.de
Sun May 24 08:48:11 EDT 2020
Hi,
> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org]
> On Behalf Of Stijn Segers
> Sent: Samstag, 23. Mai 2020 10:50
> To: openwrt-devel at lists.openwrt.org
> Subject: [OpenWrt-Devel] [PATCH v3] ath79/nand: add support for Netgear
> WNDR4300SW
>
> This patch adds support for the WNDR4300SW, marketed by California ISP
> SureWest (hence the 'SW' suffix). Hardware wise, it's identical to the
> WNDR4300 v1.
I've merged your patch.
Note that the patch doesn't add an entry for uboot-envtools, maybe you can provide a separate patch for that if you care, should be something simple like https://github.com/openwrt/openwrt/commit/a09408fa576c6482c21f683662cb2d5a49e14ecf
Best
Adrian
>
> Specifications:
> * SoC: Atheros AR9344
> * RAM: 128 MB
> * Flash: 128 MB NAND flash
> * WiFi: Atheros AR9580 (5 GHz) and AR9344 (2,4 GHz)
> * Ethernet: 5x 1000Base-T
> * LED: Power, WAN, LAN, WiFi, USB, WPS
> * UART: on board, to the right of the RF shield at the top of the board
>
> Installation:
>
> * Flashing through the OEM web interface:
> + Connect your computer to the router with an ethernet cable and browse
> to http://192.168.1.1/
> + Log in with the default credentials are admin:password
> + Browse to Advanced > Administration > Firmware Upgrade in the Netgear
> interface
> + Upload the Openwrt firmware: openwrt-ath79-nand-
> netgear_wndr4300sw-squashfs-factory.img
> + Proceed with the firmware installation and give the device a few
> minutes to finish and reboot.
>
> * Flashing through TFTP:
> + Configure your wired client with a static IP in the 192.168.1.x range,
> e.g. 192.168.1.10 and netmask 255.255.255.0.
> + Power off the router.
> + Press and hold the RESET button (the factory reset button on the bottom
> of the device, with the red circle around it) and turn the router on
> while keeping the button pressed.
> + The power LED will start flashing orange. You can release the button
> once it switches to flashing green.
> + Transfer the image over TFTP:
> $ tftp 192.168.1.1 -m binary -c put openwrt-ath79-nand-
> netgear_wndr4300sw-squashfs-factory.img
>
> Signed-off-by: Stijn Segers <foss at volatilesystems.org>
> ---
> target/linux/ath79/dts/ar9344_netgear_wndr4300sw.dts | 9 +++++++++
> target/linux/ath79/image/nand.mk | 10 ++++++++++
> target/linux/ath79/nand/base-files/etc/board.d/01_leds | 1 +
> .../linux/ath79/nand/base-files/etc/board.d/02_network | 2 ++ .../base-
> files/etc/hotplug.d/firmware/10-ath9k-eeprom | 2 ++
> 5 files changed, 24 insertions(+)
> create mode 100644
> target/linux/ath79/dts/ar9344_netgear_wndr4300sw.dts
>
> diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr4300sw.dts
> b/target/linux/ath79/dts/ar9344_netgear_wndr4300sw.dts
> new file mode 100644
> index 0000000000..fb90eee550
> --- /dev/null
> +++ b/target/linux/ath79/dts/ar9344_netgear_wndr4300sw.dts
> @@ -0,0 +1,9 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/;
> +
> +#include "ar9344_netgear_wndr.dtsi"
> +
> +/ {
> + compatible = "netgear,wndr4300sw", "qca,ar9344";
> + model = "Netgear WNDR4300SW";
> +};
> diff --git a/target/linux/ath79/image/nand.mk
> b/target/linux/ath79/image/nand.mk
> index 3ccd19914f..dc06b65371 100644
> --- a/target/linux/ath79/image/nand.mk
> +++ b/target/linux/ath79/image/nand.mk
> @@ -172,6 +172,16 @@ define Device/netgear_wndr4300 endef
> TARGET_DEVICES += netgear_wndr4300
>
> +define Device/netgear_wndr4300sw
> + SOC := ar9344
> + DEVICE_MODEL := WNDR4300SW
> + NETGEAR_KERNEL_MAGIC := 0x33373033
> + NETGEAR_BOARD_ID := WNDR4300SW
> + NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
> + $(Device/netgear_ath79_nand)
> +endef
> +TARGET_DEVICES += netgear_wndr4300sw
> +
> define Device/netgear_wndr4300-v2
> SOC := qca9563
> DEVICE_MODEL := WNDR4300
> diff --git a/target/linux/ath79/nand/base-files/etc/board.d/01_leds
> b/target/linux/ath79/nand/base-files/etc/board.d/01_leds
> index d9989ec538..4f601849fc 100755
> --- a/target/linux/ath79/nand/base-files/etc/board.d/01_leds
> +++ b/target/linux/ath79/nand/base-files/etc/board.d/01_leds
> @@ -14,6 +14,7 @@ glinet,gl-ar300m-nor)
> ;;
> netgear,wndr3700-v4|\
> netgear,wndr4300|\
> +netgear,wndr4300sw|\
> netgear,wndr4300-v2|\
> netgear,wndr4500-v3)
> ucidef_set_led_switch "wan-amber" "WAN (amber)"
> "netgear:amber:wan" "switch0" "0x20"
> diff --git a/target/linux/ath79/nand/base-files/etc/board.d/02_network
> b/target/linux/ath79/nand/base-files/etc/board.d/02_network
> index b2191eed92..84cdfd99bb 100755
> --- a/target/linux/ath79/nand/base-files/etc/board.d/02_network
> +++ b/target/linux/ath79/nand/base-files/etc/board.d/02_network
> @@ -22,6 +22,7 @@ ath79_setup_interfaces()
> ;;
> netgear,wndr3700-v4|\
> netgear,wndr4300|\
> + netgear,wndr4300sw|\
> netgear,wndr4300-v2|\
> netgear,wndr4500-v3)
> ucidef_add_switch "switch0" \
> @@ -44,6 +45,7 @@ ath79_setup_macs()
> case "$board" in
> netgear,wndr3700-v4|\
> netgear,wndr4300|\
> + netgear,wndr4300sw|\
> netgear,wndr4300-v2|\
> netgear,wndr4500-v3)
> wan_mac=$(mtd_get_mac_binary caldata 0x6) diff --git
> a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-
> eeprom b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-
> ath9k-eeprom
> index f5fae46dfb..355be93ead 100644
> --- a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-
> eeprom
> +++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k
> +++ -eeprom
> @@ -11,6 +11,7 @@ case "$FIRMWARE" in
> case $board in
> netgear,wndr3700-v4|\
> netgear,wndr4300|\
> + netgear,wndr4300sw|\
> netgear,wndr4300-v2|\
> netgear,wndr4500-v3)
> caldata_extract "caldata" 0x1000 0x440 @@ -24,6 +25,7 @@
> case "$FIRMWARE" in
> case $board in
> netgear,wndr3700-v4|\
> netgear,wndr4300|\
> + netgear,wndr4300sw|\
> netgear,wndr4300-v2|\
> netgear,wndr4500-v3)
> caldata_extract "caldata" 0x5000 0x440
> --
> 2.20.1
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: openpgp-digital-signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20200524/9eeb0195/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list