[OpenWrt-Devel] [PATCH] treewide: use "model" instead of ambiguous "boardname" in 01_leds
Matthias Schiffer
mschiffer at universe-factory.net
Thu May 21 14:13:52 EDT 2020
On 5/21/20 8:01 PM, Adrian Schmutzler wrote:
> At the moment, several board.d/01_leds files use a variable for the
> model part of their label. For historic reasons, this is called
> "boardname", though when a vendor is present in the result of the
> board_name function, it's only the model part of this result.
>
> To signal this difference of the variable compared to the board_name
> function, let's just rename it to "model", as it contains the model
> part of the board name/compatible.
>
> Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
I don't think model is a good choice for the variable name: "model" is
generally used to refer to a human-readable device identification, both in
device trees, and in OpenWrt's sysinfo.
Maybe simply call it "device"? Or leave it as is, I'm not really convinced
this needs to be changed.
Kind regards,
Matthias
> ---
> .../generic/base-files/etc/board.d/01_leds | 142 +++++++--------
> .../etc/uci-defaults/04_led_migration | 4 +-
> .../etc/uci-defaults/04_led_migration | 2 +-
> .../ath79/nand/base-files/etc/board.d/01_leds | 2 +-
> .../ath79/tiny/base-files/etc/board.d/01_leds | 12 +-
> .../ipq40xx/base-files/etc/board.d/01_leds | 44 ++---
> .../ipq806x/base-files/etc/board.d/01_leds | 44 ++---
> .../cortexa9/base-files/etc/board.d/01_leds | 10 +-
> .../mt7620/base-files/etc/board.d/01_leds | 162 +++++++++---------
> .../mt7621/base-files/etc/board.d/01_leds | 64 +++----
> .../etc/uci-defaults/04_led_migration | 10 +-
> .../mt76x8/base-files/etc/board.d/01_leds | 106 ++++++------
> .../rt288x/base-files/etc/board.d/01_leds | 4 +-
> .../rt305x/base-files/etc/board.d/01_leds | 30 ++--
> .../rt3883/base-files/etc/board.d/01_leds | 10 +-
> 15 files changed, 323 insertions(+), 323 deletions(-)
>
> diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
> index a3c5b3f988..ce8cc18f09 100755
> --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
> +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
> @@ -5,98 +5,98 @@
> board_config_update
>
> board=$(board_name)
> -boardname="${board##*,}"
> +model="${board##*,}"
>
> case "$board" in
> 8dev,carambola2)
> - ucidef_set_led_netdev "lan" "LAN" "$boardname:orange:eth0" "eth0"
> - ucidef_set_led_switch "wan" "WAN" "$boardname:orange:eth1" "switch0" "0x04"
> + ucidef_set_led_netdev "lan" "LAN" "$model:orange:eth0" "eth0"
> + ucidef_set_led_switch "wan" "WAN" "$model:orange:eth1" "switch0" "0x04"
> ;;
> alfa-network,ap121f|\
> avm,fritz450e)
> - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
> + ucidef_set_led_netdev "lan" "LAN" "$model:green:lan" "eth0"
> ;;
> avm,fritz1750e)
> - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
> + ucidef_set_led_netdev "lan" "LAN" "$model:green:lan" "eth0"
> ucidef_set_rssimon "wlan1" "200000" "1"
> - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan1" "1" "100"
> - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan1" "20" "100"
> - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:green:rssi2" "wlan1" "40" "100"
> - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi3" "wlan1" "60" "100"
> - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi4" "wlan1" "80" "100"
> + ucidef_set_led_rssi "rssilow" "RSSILOW" "$model:green:rssi0" "wlan1" "1" "100"
> + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$model:green:rssi1" "wlan1" "20" "100"
> + ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$model:green:rssi2" "wlan1" "40" "100"
> + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$model:green:rssi3" "wlan1" "60" "100"
> + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$model:green:rssi4" "wlan1" "80" "100"
> ;;
> avm,fritz300e)
> - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
> + ucidef_set_led_netdev "lan" "LAN" "$model:green:lan" "eth0"
> ucidef_set_rssimon "wlan0" "200000" "1"
> - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
> - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
> - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:green:rssi2" "wlan0" "40" "100"
> - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
> - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
> + ucidef_set_led_rssi "rssilow" "RSSILOW" "$model:green:rssi0" "wlan0" "1" "100"
> + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$model:green:rssi1" "wlan0" "20" "100"
> + ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$model:green:rssi2" "wlan0" "40" "100"
> + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$model:green:rssi3" "wlan0" "60" "100"
> + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$model:green:rssi4" "wlan0" "80" "100"
> ;;
> avm,fritz4020)
> - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
> - ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x1E"
> + ucidef_set_led_netdev "wan" "WAN" "$model:green:wan" "eth1"
> + ucidef_set_led_switch "lan" "LAN" "$model:green:lan" "switch0" "0x1E"
> ;;
> comfast,cf-e110n-v2)
> - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1"
> - ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x02"
> - ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
> + ucidef_set_led_netdev "lan" "LAN" "$model:green:lan" "eth1"
> + ucidef_set_led_switch "wan" "WAN" "$model:green:wan" "switch0" "0x02"
> + ucidef_set_led_wlan "wlan" "WLAN" "$model:green:wlan" "phy0tpt"
> ucidef_set_rssimon "wlan0" "200000" "1"
> - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
> - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100"
> - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
> - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
> + ucidef_set_led_rssi "rssilow" "RSSILOW" "$model:red:rssilow" "wlan0" "1" "100"
> + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$model:red:rssimediumlow" "wlan0" "26" "100"
> + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$model:green:rssimediumhigh" "wlan0" "51" "100"
> + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$model:green:rssihigh" "wlan0" "76" "100"
> ;;
> comfast,cf-e120a-v3)
> - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1"
> - ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x04"
> + ucidef_set_led_netdev "lan" "LAN" "$model:green:lan" "eth1"
> + ucidef_set_led_switch "wan" "WAN" "$model:green:wan" "switch0" "0x04"
> ucidef_set_rssimon "wlan0" "200000" "1"
> - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
> - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100"
> - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
> - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
> + ucidef_set_led_rssi "rssilow" "RSSILOW" "$model:red:rssilow" "wlan0" "1" "100"
> + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$model:red:rssimediumlow" "wlan0" "26" "100"
> + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$model:green:rssimediumhigh" "wlan0" "51" "100"
> + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$model:green:rssihigh" "wlan0" "76" "100"
> ;;
> comfast,cf-e313ac)
> - ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02"
> - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
> + ucidef_set_led_switch "lan" "LAN" "$model:green:lan" "switch0" "0x02"
> + ucidef_set_led_netdev "wan" "WAN" "$model:green:wan" "eth1"
> ucidef_set_rssimon "wlan0" "200000" "1"
> - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
> - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100"
> - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
> - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
> + ucidef_set_led_rssi "rssilow" "RSSILOW" "$model:red:rssilow" "wlan0" "1" "100"
> + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$model:red:rssimediumlow" "wlan0" "26" "100"
> + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$model:green:rssimediumhigh" "wlan0" "51" "100"
> + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$model:green:rssihigh" "wlan0" "76" "100"
> ;;
> comfast,cf-e314n-v2)
> - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
> - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth1"
> + ucidef_set_led_netdev "wan" "WAN" "$model:green:wan" "eth0"
> + ucidef_set_led_netdev "lan" "LAN" "$model:green:lan" "eth1"
> ucidef_set_rssimon "wlan0" "200000" "1"
> - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:red:rssilow" "wlan0" "1" "100"
> - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:red:rssimediumlow" "wlan0" "26" "100"
> - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssimediumhigh" "wlan0" "51" "100"
> - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssihigh" "wlan0" "76" "100"
> + ucidef_set_led_rssi "rssilow" "RSSILOW" "$model:red:rssilow" "wlan0" "1" "100"
> + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$model:red:rssimediumlow" "wlan0" "26" "100"
> + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$model:green:rssimediumhigh" "wlan0" "51" "100"
> + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$model:green:rssihigh" "wlan0" "76" "100"
> ;;
> comfast,cf-e5)
> - ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x02"
> - ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1"
> + ucidef_set_led_switch "lan" "LAN" "$model:blue:lan" "switch0" "0x02"
> + ucidef_set_led_netdev "wan" "WAN" "$model:blue:wan" "eth1"
> ucidef_set_rssimon "wlan0" "200000" "1"
> - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:blue:rssi0" "wlan0" "1" "100"
> - ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:blue:rssi1" "wlan0" "33" "100"
> - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:blue:rssi2" "wlan0" "66" "100"
> + ucidef_set_led_rssi "rssilow" "RSSILOW" "$model:blue:rssi0" "wlan0" "1" "100"
> + ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$model:blue:rssi1" "wlan0" "33" "100"
> + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$model:blue:rssi2" "wlan0" "66" "100"
> ;;
> comfast,cf-e560ac)
> - ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1"
> - ucidef_set_led_switch "lan1" "LAN1" "$boardname:blue:lan1" "switch0" "0x02"
> - ucidef_set_led_switch "lan2" "LAN2" "$boardname:blue:lan2" "switch0" "0x04"
> - ucidef_set_led_switch "lan3" "LAN3" "$boardname:blue:lan3" "switch0" "0x08"
> - ucidef_set_led_switch "lan4" "LAN4" "$boardname:blue:lan4" "switch0" "0x10"
> + ucidef_set_led_netdev "wan" "WAN" "$model:blue:wan" "eth1"
> + ucidef_set_led_switch "lan1" "LAN1" "$model:blue:lan1" "switch0" "0x02"
> + ucidef_set_led_switch "lan2" "LAN2" "$model:blue:lan2" "switch0" "0x04"
> + ucidef_set_led_switch "lan3" "LAN3" "$model:blue:lan3" "switch0" "0x08"
> + ucidef_set_led_switch "lan4" "LAN4" "$model:blue:lan4" "switch0" "0x10"
> ;;
> comfast,cf-ew72)
> - ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x02"
> - ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1"
> + ucidef_set_led_switch "lan" "LAN" "$model:blue:lan" "switch0" "0x02"
> + ucidef_set_led_netdev "wan" "WAN" "$model:blue:wan" "eth1"
> ;;
> comfast,cf-wr752ac-v1|\
> engenius,ecb1750)
> - ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0"
> + ucidef_set_led_netdev "lan" "LAN" "$model:blue:lan" "eth0"
> ;;
> devolo,magic-2-wifi)
> ucidef_set_led_netdev "plcw" "dLAN" "devolo:white:dlan" "eth0.1" "rx"
> @@ -105,23 +105,23 @@ dlink,dir-842-c1|\
> dlink,dir-842-c2|\
> dlink,dir-842-c3|\
> dlink,dir-859-a1)
> - ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"
> + ucidef_set_led_switch "internet" "WAN" "$model:green:internet" "switch0" "0x20"
> ;;
> engenius,ews511ap)
> - ucidef_set_led_netdev "lan1" "LAN1" "$boardname:blue:lan1" "eth1"
> - ucidef_set_led_netdev "lan2" "LAN2" "$boardname:blue:lan2" "eth0"
> + ucidef_set_led_netdev "lan1" "LAN1" "$model:blue:lan1" "eth1"
> + ucidef_set_led_netdev "lan2" "LAN2" "$model:blue:lan2" "eth0"
> ;;
> etactica,eg200)
> - ucidef_set_led_netdev "lan" "LAN" "$boardname:red:eth0" "eth0"
> - ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
> + ucidef_set_led_netdev "lan" "LAN" "$model:red:eth0" "eth0"
> + ucidef_set_led_oneshot "modbus" "Modbus" "$model:red:modbus" "100" "33"
> ;;
> glinet,6408|\
> glinet,6416)
> ucidef_set_led_netdev "lan" "LAN" "gl-inet:green:lan" "eth0"
> ;;
> glinet,gl-ar150)
> - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
> - ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02"
> + ucidef_set_led_netdev "wan" "WAN" "$model:green:wan" "eth1"
> + ucidef_set_led_switch "lan" "LAN" "$model:green:lan" "switch0" "0x02"
> ;;
> glinet,gl-ar300m-lite)
> ucidef_set_led_netdev "lan" "LAN" "gl-ar300m-lite:green:lan" "eth0"
> @@ -130,7 +130,7 @@ glinet,gl-ar300m16)
> ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0"
> ;;
> glinet,gl-x750)
> - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
> + ucidef_set_led_netdev "wan" "WAN" "$model:green:wan" "eth1"
> ;;
> netgear,wnr2200-8m|\
> netgear,wnr2200-16m)
> @@ -155,7 +155,7 @@ pcs,cr3000)
> ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02"
> ;;
> qihoo,c301)
> - ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
> + ucidef_set_led_wlan "wlan" "WLAN" "$model:green:wlan" "phy0tpt"
> ;;
> tplink,archer-a7-v5|\
> tplink,archer-c7-v4|\
> @@ -291,15 +291,15 @@ ubnt,powerbeam-5ac-gen2)
> ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:blue:rssi3" "wlan0" "76" "100"
> ;;
> wd,mynet-wifi-rangeextender)
> - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
> + ucidef_set_led_netdev "lan" "LAN" "$model:green:lan" "eth0"
> ucidef_set_rssimon "wlan0" "200000" "1"
> - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:rssi-low" "wlan0" "1" "100"
> - ucidef_set_led_rssi "rssimedium" "RSSIMED" "$boardname:blue:rssi-med" "wlan0" "33" "100"
> - ucidef_set_led_rssi "rssihigh" "RSSIMAX" "$boardname:blue:rssi-max" "wlan0" "66" "100"
> + ucidef_set_led_rssi "rssilow" "RSSILOW" "$model:rssi-low" "wlan0" "1" "100"
> + ucidef_set_led_rssi "rssimedium" "RSSIMED" "$model:blue:rssi-med" "wlan0" "33" "100"
> + ucidef_set_led_rssi "rssihigh" "RSSIMAX" "$model:blue:rssi-max" "wlan0" "66" "100"
> ;;
> yuncore,a770)
> - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1"
> - ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x10"
> + ucidef_set_led_netdev "wan" "WAN" "$model:green:wan" "eth1"
> + ucidef_set_led_switch "lan" "LAN" "$model:green:lan" "switch0" "0x10"
> ;;
> zbtlink,zbt-wd323)
> ucidef_set_led_switch "lan1" "LAN1" "zbt-wd323:orange:lan1" "switch0" "0x10"
> diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
> index cffc2e6c4b..eb73e08361 100644
> --- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
> +++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
> @@ -4,7 +4,7 @@
> . /lib/functions/migrations.sh
>
> board=$(board_name)
> -boardonly="${board##*,}"
> +model="${board##*,}"
>
> case "$board" in
> engenius,epg5000)
> @@ -19,7 +19,7 @@ tplink,archer-c60-v2|\
> tplink,archer-c7-v4|\
> tplink,archer-c7-v5|\
> tplink,tl-wr902ac-v1)
> - migrate_leds "^$boardonly:=tp-link:"
> + migrate_leds "^$model:=tp-link:"
> ;;
> tplink,archer-c7-v2|\
> tplink,tl-wdr3600-v1|\
> diff --git a/target/linux/ath79/mikrotik/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/mikrotik/base-files/etc/uci-defaults/04_led_migration
> index 1a7b371a99..2ccce89a9a 100644
> --- a/target/linux/ath79/mikrotik/base-files/etc/uci-defaults/04_led_migration
> +++ b/target/linux/ath79/mikrotik/base-files/etc/uci-defaults/04_led_migration
> @@ -4,7 +4,7 @@
> . /lib/functions/migrations.sh
>
> board=$(board_name)
> -boardonly="${board##*,}"
> +model="${board##*,}"
>
> case "$board" in
> mikrotik,*)
> diff --git a/target/linux/ath79/nand/base-files/etc/board.d/01_leds b/target/linux/ath79/nand/base-files/etc/board.d/01_leds
> index d9989ec538..af256e2387 100755
> --- a/target/linux/ath79/nand/base-files/etc/board.d/01_leds
> +++ b/target/linux/ath79/nand/base-files/etc/board.d/01_leds
> @@ -5,7 +5,7 @@
> board_config_update
>
> board=$(board_name)
> -boardname="${board##*,}"
> +model="${board##*,}"
>
> case "$board" in
> glinet,gl-ar300m-nand|\
> diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
> index 3588278b01..94ec4b770c 100755
> --- a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
> +++ b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
> @@ -5,15 +5,15 @@
> board_config_update
>
> board=$(board_name)
> -boardname="${board##*,}"
> +model="${board##*,}"
>
> case "$board" in
> buffalo,whr-g301n)
> - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
> - ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x02"
> - ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x04"
> - ucidef_set_led_switch "lan3" "LAN3" "$boardname:green:lan3" "switch0" "0x08"
> - ucidef_set_led_switch "lan4" "LAN4" "$boardname:green:lan4" "switch0" "0x10"
> + ucidef_set_led_netdev "wan" "WAN" "$model:green:wan" "eth0"
> + ucidef_set_led_switch "lan1" "LAN1" "$model:green:lan1" "switch0" "0x02"
> + ucidef_set_led_switch "lan2" "LAN2" "$model:green:lan2" "switch0" "0x04"
> + ucidef_set_led_switch "lan3" "LAN3" "$model:green:lan3" "switch0" "0x08"
> + ucidef_set_led_switch "lan4" "LAN4" "$model:green:lan4" "switch0" "0x10"
> ;;
> dlink,dir-615-e4)
> ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth0"
> diff --git a/target/linux/ipq40xx/base-files/etc/board.d/01_leds b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
> index 0a128e8cbc..af4692b0cf 100755
> --- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds
> +++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
> @@ -8,15 +8,15 @@
> board_config_update
>
> board=$(board_name)
> -boardname="${board##*,}"
> +model="${board##*,}"
>
> case "$board" in
> alfa-network,ap120c-ac)
> - ucidef_set_led_netdev "wan" "WAN" "${boardname}:amber:wan" "eth1"
> + ucidef_set_led_netdev "wan" "WAN" "$model:amber:wan" "eth1"
> ;;
> asus,rt-ac58u)
> - ucidef_set_led_netdev "wan" "WAN" "${boardname}:blue:wan" "eth1"
> - ucidef_set_led_switch "lan" "LAN" "${boardname}:blue:lan" "switch0" "0x1e"
> + ucidef_set_led_netdev "wan" "WAN" "$model:blue:wan" "eth1"
> + ucidef_set_led_switch "lan" "LAN" "$model:blue:lan" "switch0" "0x1e"
> ;;
> avm,fritzbox-4040)
> ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
> @@ -25,28 +25,28 @@ avm,fritzbox-4040)
> ;;
> avm,fritzbox-7530 |\
> glinet,gl-b1300)
> - ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:green:wlan" "phy0tpt"
> + ucidef_set_led_wlan "wlan" "WLAN" "$model:green:wlan" "phy0tpt"
> ;;
> engenius,eap1300)
> - ucidef_set_led_netdev "lan" "LAN" "${boardname}:blue:lan" "eth0"
> - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2g" "phy0tpt"
> - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:yellow:wlan5g" "phy1tpt"
> - ucidef_set_led_default "mesh" "MESH" "${boardname}:blue:mesh" "0"
> + ucidef_set_led_netdev "lan" "LAN" "$model:blue:lan" "eth0"
> + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$model:blue:wlan2g" "phy0tpt"
> + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$model:yellow:wlan5g" "phy1tpt"
> + ucidef_set_led_default "mesh" "MESH" "$model:blue:mesh" "0"
> ;;
> engenius,eap2200)
> - ucidef_set_led_netdev "lan1" "LAN1" "${boardname}:blue:lan1" "eth0"
> - ucidef_set_led_netdev "lan2" "LAN2" "${boardname}:blue:lan2" "eth1"
> + ucidef_set_led_netdev "lan1" "LAN1" "$model:blue:lan1" "eth0"
> + ucidef_set_led_netdev "lan2" "LAN2" "$model:blue:lan2" "eth1"
> ;;
> engenius,ens620ext)
> - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2G" "phy0tpt"
> - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5G" "phy1tpt"
> - ucidef_set_led_netdev "lan1" "LAN1" "${boardname}:green:lan1" "eth0"
> - ucidef_set_led_netdev "lan2" "LAN2" "${boardname}:green:lan2" "eth1"
> + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$model:green:wlan2G" "phy0tpt"
> + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$model:green:wlan5G" "phy1tpt"
> + ucidef_set_led_netdev "lan1" "LAN1" "$model:green:lan1" "eth0"
> + ucidef_set_led_netdev "lan2" "LAN2" "$model:green:lan2" "eth1"
> ;;
> mobipromo,cm520-79f)
> - ucidef_set_led_netdev "wan" "WAN" "${boardname}:blue:wan" "eth1"
> - ucidef_set_led_switch "lan1" "LAN1" "${boardname}:blue:lan1" "switch0" "0x10"
> - ucidef_set_led_switch "lan2" "LAN2" "${boardname}:blue:lan2" "switch0" "0x08"
> + ucidef_set_led_netdev "wan" "WAN" "$model:blue:wan" "eth1"
> + ucidef_set_led_switch "lan1" "LAN1" "$model:blue:lan1" "switch0" "0x10"
> + ucidef_set_led_switch "lan2" "LAN2" "$model:blue:lan2" "switch0" "0x08"
> ;;
> netgear,ex6100v2 |\
> netgear,ex6150v2)
> @@ -59,12 +59,12 @@ qxwlan,e2600ac-c2)
> ucidef_set_led_wlan "wlan5g" "WLAN1" "e2600ac:green:wlan1" "phy1tpt"
> ;;
> zyxel,nbg6617)
> - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2G" "phy0tpt"
> - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5G" "phy1tpt"
> + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$model:green:wlan2G" "phy0tpt"
> + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$model:green:wlan5G" "phy1tpt"
> ;;
> zyxel,wre6606)
> - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2g" "phy0tpt"
> - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5g" "phy1tpt"
> + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$model:green:wlan2g" "phy0tpt"
> + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$model:green:wlan5g" "phy1tpt"
> ;;
> *)
> ;;
> diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds
> index f8b6c32358..f169397224 100755
> --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
> +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
> @@ -8,46 +8,46 @@
> board_config_update
>
> board=$(board_name)
> -boardname="${board##*,}"
> +model="${board##*,}"
>
> case "$board" in
> buffalo,wxr-2533dhp)
> - ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:white:wireless" "phy0tpt"
> - ucidef_set_led_switch "wan" "WAN" "${boardname}:white:internet" "switch0" "0x20"
> + ucidef_set_led_wlan "wlan" "WLAN" "$model:white:wireless" "phy0tpt"
> + ucidef_set_led_switch "wan" "WAN" "$model:white:internet" "switch0" "0x20"
> ;;
> compex,wpq864)
> - ucidef_set_led_usbport "usb" "USB" "wpq864:green:usb" "usb1-port1" "usb2-port1"
> - ucidef_set_led_usbport "pcie-usb" "PCIe USB" "wpq864:green:usb-pcie" "usb3-port1"
> + ucidef_set_led_usbport "usb" "USB" "$model:green:usb" "usb1-port1" "usb2-port1"
> + ucidef_set_led_usbport "pcie-usb" "PCIe USB" "$model:green:usb-pcie" "usb3-port1"
> ;;
> nec,wg2600hp)
> - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2g" "phy1tpt"
> - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5g" "phy0tpt"
> - ucidef_set_led_switch "wan" "WAN" "${boardname}:green:active" "switch0" "0x2"
> + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$model:green:wlan2g" "phy1tpt"
> + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$model:green:wlan5g" "phy0tpt"
> + ucidef_set_led_switch "wan" "WAN" "$model:green:active" "switch0" "0x2"
> ;;
> netgear,d7800 |\
> netgear,r7500 |\
> netgear,r7500v2 |\
> netgear,r7800)
> - ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb1" "usb1-port1" "usb2-port1"
> - ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb2" "usb3-port1" "usb4-port1"
> - ucidef_set_led_switch "wan" "WAN" "${boardname}:white:wan" "switch0" "0x20"
> - ucidef_set_led_ide "esata" "eSATA" "${boardname}:white:esata"
> + ucidef_set_led_usbport "usb1" "USB 1" "$model:white:usb1" "usb1-port1" "usb2-port1"
> + ucidef_set_led_usbport "usb2" "USB 2" "$model:white:usb2" "usb3-port1" "usb4-port1"
> + ucidef_set_led_switch "wan" "WAN" "$model:white:wan" "switch0" "0x20"
> + ucidef_set_led_ide "esata" "eSATA" "$model:white:esata"
> ;;
> tplink,c2600)
> - ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1"
> - ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1"
> - ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
> - ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
> + ucidef_set_led_usbport "usb1" "USB 1" "$model:white:usb_2" "usb1-port1" "usb2-port1"
> + ucidef_set_led_usbport "usb2" "USB 2" "$model:white:usb_4" "usb3-port1" "usb4-port1"
> + ucidef_set_led_switch "wan" "wan" "$model:white:wan" "switch0" "0x20"
> + ucidef_set_led_switch "lan" "lan" "$model:white:lan" "switch0" "0x1e"
> ;;
> tplink,vr2600v)
> - ucidef_set_led_usbport "usb" "USB" "${boardname}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
> - ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
> - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:white:wlan2g" "phy0tpt"
> - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:white:wlan5g" "phy1tpt"
> - ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
> + ucidef_set_led_usbport "usb" "USB" "$model:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
> + ucidef_set_led_switch "lan" "lan" "$model:white:lan" "switch0" "0x1e"
> + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$model:white:wlan2g" "phy0tpt"
> + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$model:white:wlan5g" "phy1tpt"
> + ucidef_set_led_switch "wan" "wan" "$model:white:wan" "switch0" "0x20"
> ;;
> zyxel,nbg6817)
> - ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1"
> + ucidef_set_led_netdev "wan" "WAN" "$model:white:internet" "eth1"
> ;;
> *)
> ;;
> diff --git a/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds
> index a7762f0080..08db772e4a 100755
> --- a/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds
> +++ b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds
> @@ -9,17 +9,17 @@
> board_config_update
>
> board=$(board_name)
> -boardname="${board##*,}"
> +model="${board##*,}"
>
> case "$board" in
> linksys,caiman|\
> linksys,cobra|\
> linksys,rango|\
> linksys,shelby)
> - ucidef_set_led_netdev "wan" "WAN" "pca963x:$boardname:white:wan" "eth1"
> - ucidef_set_led_usbport "usb1" "USB 1" "pca963x:$boardname:white:usb2" "usb1-port1"
> - ucidef_set_led_usbport "usb2" "USB 2" "pca963x:$boardname:white:usb3_1" "usb2-port1" "usb3-port1"
> - ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:$boardname:white:usb3_2" "usb3-port1"
> + ucidef_set_led_netdev "wan" "WAN" "pca963x:$model:white:wan" "eth1"
> + ucidef_set_led_usbport "usb1" "USB 1" "pca963x:$model:white:usb2" "usb1-port1"
> + ucidef_set_led_usbport "usb2" "USB 2" "pca963x:$model:white:usb3_1" "usb2-port1" "usb3-port1"
> + ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:$model:white:usb3_2" "usb3-port1"
> ;;
> linksys,mamba)
> ucidef_set_led_netdev "wan" "WAN" "mamba:white:wan" "eth1"
> diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
> index c1deae59e3..e644434f93 100755
> --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
> +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
> @@ -9,7 +9,7 @@ set_wifi_led() {
>
>
> board=$(board_name)
> -boardname="${board##*,}"
> +model="${board##*,}"
>
> board_config_update
>
> @@ -18,41 +18,41 @@ led_wlan="$(get_dt_led wlan)"
>
> case $board in
> aigale,ai-br100)
> - ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2"
> - set_wifi_led "$boardname:blue:wlan"
> + ucidef_set_led_netdev "wan" "wan" "$model:blue:wan" "eth0.2"
> + set_wifi_led "$model:blue:wlan"
> ;;
> alfa-network,ac1200rm)
> - set_wifi_led "$boardname:green:wlan2g" "wlan1"
> + set_wifi_led "$model:green:wlan2g" "wlan1"
> ;;
> alfa-network,r36m-e4g)
> - ucidef_set_led_netdev "4g" "4g" "$boardname:orange:4g" "wwan0"
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x8"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
> + ucidef_set_led_netdev "4g" "4g" "$model:orange:4g" "wwan0"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x8"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x10"
> ;;
> alfa-network,tube-e4g)
> - ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0"
> - ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" "eth0"
> + ucidef_set_led_netdev "4g" "4g" "$model:green:4g" "wwan0"
> + ucidef_set_led_netdev "lan" "lan" "$model:blue:lan" "eth0"
> ;;
> asus,rp-n53)
> - ucidef_set_led_netdev "eth" "Network" "$boardname:white:back" "eth0"
> - set_wifi_led "$boardname:blue:wifi"
> + ucidef_set_led_netdev "eth" "Network" "$model:white:back" "eth0"
> + set_wifi_led "$model:blue:wifi"
> ;;
> asus,rt-n12p)
> - ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0.1
> - ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2
> - set_wifi_led "$boardname:green:air"
> + ucidef_set_led_netdev "lan" "lan" "$model:green:lan" eth0.1
> + ucidef_set_led_netdev "wan" "wan" "$model:green:wan" eth0.2
> + set_wifi_led "$model:green:air"
> ;;
> asus,rt-n14u)
> - ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" eth0.1
> - ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2
> - set_wifi_led "$boardname:blue:air"
> + ucidef_set_led_netdev "lan" "lan" "$model:blue:lan" eth0.1
> + ucidef_set_led_netdev "wan" "wan" "$model:blue:wan" eth0.2
> + set_wifi_led "$model:blue:air"
> ;;
> bdcom,wap2100-sk)
> - set_wifi_led "$boardname:green:wlan2g"
> + set_wifi_led "$model:green:wlan2g"
> ;;
> comfast,cf-wr800n)
> - ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
> - set_wifi_led "$boardname:white:wifi"
> + ucidef_set_led_netdev "lan" "lan" "$model:white:ethernet" eth0.1
> + set_wifi_led "$model:white:wifi"
> ;;
> dlink,dwr-116-a1|\
> head-weblink,hdrm200|\
> @@ -62,146 +62,146 @@ zbtlink,zbt-wr8305rt|\
> zyxel,keenetic-omni|\
> zyxel,keenetic-omni-ii|\
> zyxel,keenetic-viva)
> - set_wifi_led "$boardname:green:wifi"
> + set_wifi_led "$model:green:wifi"
> ;;
> dlink,dwr-118-a1)
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1f"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x20"
> - set_wifi_led "$boardname:green:wlan2g" "wlan1"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x1f"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x20"
> + set_wifi_led "$model:green:wlan2g" "wlan1"
> ;;
> dlink,dwr-118-a2)
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
> - set_wifi_led "$boardname:green:wlan2g" "wlan1"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x1e"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x01"
> + set_wifi_led "$model:green:wlan2g" "wlan1"
> ;;
> dlink,dwr-921-c1|\
> dlink,dwr-922-e2)
> - set_wifi_led "$boardname:green:wifi"
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
> - ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link"
> - ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx"
> + set_wifi_led "$model:green:wifi"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x0f"
> + ucidef_set_led_netdev "signalstrength" "signalstrength" "$model:green:sigstrength" "wwan0" "link"
> + ucidef_set_led_netdev "4g" "4g" "$model:green:4g" "wwan0" "tx rx"
> ;;
> dlink,dwr-960)
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x2e"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x2e"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x01"
> ;;
> dovado,tiny-ac)
> - set_wifi_led "$boardname:orange:wifi"
> + set_wifi_led "$model:orange:wifi"
> ;;
> edimax,br-6478ac-v2|\
> edimax,ew-7478apc)
> - set_wifi_led "$boardname:blue:wlan"
> + set_wifi_led "$model:blue:wlan"
> ;;
> edimax,ew-7476rpc|\
> edimax,ew-7478ac)
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x20"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x20"
> ;;
> elecom,wrh-300cr)
> - set_wifi_led "$boardname:green:wlan"
> - ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0"
> + set_wifi_led "$model:green:wlan"
> + ucidef_set_led_netdev "lan" "lan" "$model:green:ethernet" "eth0"
> ;;
> engenius,esr600)
> - ucidef_set_led_netdev "wlan5g" "5.0GHz" "$boardname:blue:wlan5g" "wlan0"
> - ucidef_set_led_netdev "wlan2g" "2.4GHz" "$boardname:blue:wlan2g" "wlan1"
> + ucidef_set_led_netdev "wlan5g" "5.0GHz" "$model:blue:wlan5g" "wlan0"
> + ucidef_set_led_netdev "wlan2g" "2.4GHz" "$model:blue:wlan2g" "wlan1"
> ;;
> glinet,gl-mt300a|\
> glinet,gl-mt300n|\
> glinet,gl-mt750)
> - set_wifi_led "$boardname:wlan"
> + set_wifi_led "$model:wlan"
> ;;
> hiwifi,hc5661|\
> hiwifi,hc5761)
> - ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x01"
> + ucidef_set_led_switch "internet" "internet" "$model:blue:internet" "switch0" "0x01"
> ;;
> hiwifi,hc5861)
> - ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x20"
> + ucidef_set_led_switch "internet" "internet" "$model:blue:internet" "switch0" "0x20"
> ;;
> hnet,c108)
> - ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
> - ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0"
> + ucidef_set_led_netdev "lan" "lan" "$model:green:lan" "eth0"
> + ucidef_set_led_netdev "modem" "modem" "$model:green:modem" "wwan0"
> ;;
> iodata,wn-ac1167gr|\
> iodata,wn-ac733gr3)
> - ucidef_set_led_wlan "wlan5g" "WLAN5G" "$boardname:green:wlan5g" "phy0radio"
> - ucidef_set_led_wlan "wlan2g" "WLAN2G" "$boardname:green:wlan2g" "phy1radio"
> + ucidef_set_led_wlan "wlan5g" "WLAN5G" "$model:green:wlan5g" "phy0radio"
> + ucidef_set_led_wlan "wlan2g" "WLAN2G" "$model:green:wlan2g" "phy1radio"
> ;;
> kimax,u25awf-h1)
> set_wifi_led "u25awf:red:wifi"
> ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
> ;;
> kimax,u35wf)
> - set_wifi_led "$boardname:blue:wifi"
> - ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
> + set_wifi_led "$model:blue:wifi"
> + ucidef_set_led_netdev "eth" "ETH" "$model:green:eth" "eth0"
> ;;
> kingston,mlw221|\
> kingston,mlwg2|\
> sanlinking,d240)
> - set_wifi_led "$boardname:blue:wifi"
> + set_wifi_led "$model:blue:wifi"
> ;;
> lava,lr-25g001)
> - ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1"
> - ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0"
> + ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$model:green:wlan2g" "wlan1"
> + ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$model:green:wlan5g" "wlan0"
> ;;
> lenovo,newifi-y1)
> - ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1"
> - ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0"
> - ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x03"
> + ucidef_set_led_netdev "wifi" "WIFI" "$model:blue:wifi" "wlan1"
> + ucidef_set_led_netdev "wifi5g" "WIFI5G" "$model:blue:wifi5g" "wlan0"
> + ucidef_set_led_switch "lan" "LAN" "$model:blue:lan" "switch0" "0x03"
> ;;
> lenovo,newifi-y1s)
> - ucidef_set_led_netdev "wifi" "WIFI" "$boardname:yellow:wifi" "wlan1"
> - ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0"
> - ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
> + ucidef_set_led_netdev "wifi" "WIFI" "$model:yellow:wifi" "wlan1"
> + ucidef_set_led_netdev "wifi5g" "WIFI5G" "$model:blue:wifi" "wlan0"
> + ucidef_set_led_netdev "wan" "WAN" "$model:blue:internet" "eth0.2" "tx rx"
> ;;
> netgear,ex2700|\
> netgear,wn3000rp-v3)
> - set_wifi_led "$boardname:green:router"
> + set_wifi_led "$model:green:router"
> ;;
> netgear,ex3700|\
> netgear,ex6130)
> - ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0"
> - ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
> + ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$model:green:router" "wlan0"
> + ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$model:green:device" "wlan1"
> ;;
> phicomm,psg1208)
> - set_wifi_led "$boardname:white:wlan2g"
> + set_wifi_led "$model:white:wlan2g"
> ;;
> planex,mzk-ex750np|\
> zbtlink,zbt-we826-e)
> - set_wifi_led "$boardname:red:wifi"
> + set_wifi_led "$model:red:wifi"
> ;;
> tplink,archer-c2-v1)
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch1" "0x1e"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch1" "0x01"
> ;;
> tplink,archer-c20-v1)
> - ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
> - ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
> + ucidef_set_led_switch "lan" "lan" "$model:blue:lan" "switch0" "0x1e"
> + ucidef_set_led_switch "wan" "wan" "$model:blue:wan" "switch0" "0x01"
> ;;
> tplink,archer-c20i)
> - ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
> - ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
> + ucidef_set_led_switch "lan" "lan" "$model:blue:lan" "switch0" "0x1e"
> + ucidef_set_led_switch "wan" "wan" "$model:blue:wan" "switch0" "0x01"
> ;;
> tplink,archer-c50-v1)
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x1e"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x01"
> ;;
> tplink,archer-mr200)
> - ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1"
> - ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0"
> + ucidef_set_led_netdev "lan" "lan" "$model:white:lan" "eth0.1"
> + ucidef_set_led_netdev "wan" "wan" "$model:white:wan" "usb0"
> ;;
> tplink,re200-v1)
> - ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
> + ucidef_set_led_netdev "lan" "lan" "$model:green:lan" "eth0"
> ;;
> youku,yk1)
> - set_wifi_led "$boardname:blue:air"
> - ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
> + set_wifi_led "$model:blue:air"
> + ucidef_set_led_switch "wan" "wan" "$model:blue:wan" "switch0" "0x10"
> ;;
> zbtlink,zbt-ape522ii)
> - ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
> - ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
> - ucidef_set_led_netdev "sys2" "wlan0" "$boardname:green:sys2" "wlan0" "tx rx"
> + ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$model:green:wlan2g4" "wlan1"
> + ucidef_set_led_netdev "sys1" "wlan1" "$model:green:sys1" "wlan1" "tx rx"
> + ucidef_set_led_netdev "sys2" "wlan0" "$model:green:sys2" "wlan0" "tx rx"
> ;;
> zbtlink,zbt-wa05)
> - set_wifi_led "$boardname:blue:air"
> + set_wifi_led "$model:blue:air"
> ;;
> zbtlink,zbt-we826-16m|\
> zbtlink,zbt-we826-32m)
> @@ -217,7 +217,7 @@ zbtlink,zbt-we1026-h-32m)
> ucidef_set_led_switch "wan" "wan" "we1026-h:green:wan" "switch0" "0x10"
> ;;
> zbtlink,zbt-we2026)
> - set_wifi_led "$boardname:green:wlan"
> + set_wifi_led "$model:green:wlan"
> ;;
> esac
>
> diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
> index fdfd29d011..8073c71aea 100755
> --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
> +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
> @@ -9,7 +9,7 @@ set_wifi_led() {
>
>
> board=$(board_name)
> -boardname="${board##*,}"
> +model="${board##*,}"
>
> board_config_update
>
> @@ -18,70 +18,70 @@ led_wlan="$(get_dt_led wlan)"
>
> case $board in
> d-team,newifi-d2)
> - ucidef_set_led_netdev "internet" "internet" "$boardname:amber:internet" "wan"
> - ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0"
> - ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1"
> + ucidef_set_led_netdev "internet" "internet" "$model:amber:internet" "wan"
> + ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$model:blue:wlan2g" "wlan0"
> + ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$model:blue:wlan5g" "wlan1"
> ;;
> d-team,pbr-m1|\
> gehua,ghl-r-001)
> - ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan"
> + ucidef_set_led_netdev "internet" "internet" "$model:blue:internet" "wan"
> ;;
> dlink,dir-860l-b1)
> - ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "wan"
> + ucidef_set_led_netdev "wan" "wan" "$model:green:net" "wan"
> ;;
> gnubee,gb-pc1|\
> gnubee,gb-pc2)
> - ucidef_set_led_netdev "lan1" "lan1" "$boardname:green:lan1" "lan1"
> - ucidef_set_led_netdev "lan2" "lan2" "$boardname:green:lan2" "lan2"
> + ucidef_set_led_netdev "lan1" "lan1" "$model:green:lan1" "lan1"
> + ucidef_set_led_netdev "lan2" "lan2" "$model:green:lan2" "lan2"
> ;;
> linksys,ea7500-v2)
> - ucidef_set_led_netdev "lan1" "lan1 link" "$boardname:green:lan1" "lan1" "link"
> - ucidef_set_led_netdev "lan2" "lan2 link" "$boardname:green:lan2" "lan2" "link"
> - ucidef_set_led_netdev "lan3" "lan3 link" "$boardname:green:lan3" "lan3" "link"
> - ucidef_set_led_netdev "lan4" "lan4 link" "$boardname:green:lan4" "lan4" "link"
> - ucidef_set_led_netdev "wan" "wan link" "$boardname:green:wan" "wan" "link"
> + ucidef_set_led_netdev "lan1" "lan1 link" "$model:green:lan1" "lan1" "link"
> + ucidef_set_led_netdev "lan2" "lan2 link" "$model:green:lan2" "lan2" "link"
> + ucidef_set_led_netdev "lan3" "lan3 link" "$model:green:lan3" "lan3" "link"
> + ucidef_set_led_netdev "lan4" "lan4 link" "$model:green:lan4" "lan4" "link"
> + ucidef_set_led_netdev "wan" "wan link" "$model:green:wan" "wan" "link"
> ;;
> mikrotik,routerboard-m11g)
> ucidef_set_rssimon "wlan0" "200000" "1"
> - ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
> - ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
> - ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100"
> - ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
> - ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
> + ucidef_set_led_rssi "rssilow" "RSSILOW" "$model:green:rssi0" "wlan0" "1" "100"
> + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$model:green:rssi1" "wlan0" "20" "100"
> + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$model:green:rssi2" "wlan0" "40" "100"
> + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$model:green:rssi3" "wlan0" "60" "100"
> + ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$model:green:rssi4" "wlan0" "80" "100"
> ;;
> mtc,wr1201)
> - ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "br-lan"
> + ucidef_set_led_netdev "eth_link" "LAN link" "$model:green:eth_link" "br-lan"
> ;;
> netgear,r6220|\
> netgear,r6260|\
> netgear,r6350|\
> netgear,r6850|\
> netgear,wndr3700-v5)
> - ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" "wan"
> + ucidef_set_led_netdev "wan" "wan" "$model:green:wan" "wan"
> ;;
> netgear,r6700-v2|\
> netgear,r6800)
> - ucidef_set_led_netdev "wan" "WAN" "$boardname:white:wan" "wan"
> - ucidef_set_led_netdev "lan1" "LAN1" "$boardname:white:lan1" "lan1"
> - ucidef_set_led_netdev "lan2" "LAN2" "$boardname:white:lan2" "lan2"
> - ucidef_set_led_netdev "lan3" "LAN3" "$boardname:white:lan3" "lan3"
> - ucidef_set_led_netdev "lan4" "LAN4" "$boardname:white:lan4" "lan4"
> + ucidef_set_led_netdev "wan" "WAN" "$model:white:wan" "wan"
> + ucidef_set_led_netdev "lan1" "LAN1" "$model:white:lan1" "lan1"
> + ucidef_set_led_netdev "lan2" "LAN2" "$model:white:lan2" "lan2"
> + ucidef_set_led_netdev "lan3" "LAN3" "$model:white:lan3" "lan3"
> + ucidef_set_led_netdev "lan4" "LAN4" "$model:white:lan4" "lan4"
> ;;
> tplink,re350-v1|\
> tplink,re650-v1)
> - ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
> - ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
> - ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "lan" "tx rx"
> - ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "lan" "link"
> + ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$model:blue:wifi2G" "wlan0"
> + ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$model:blue:wifi5G" "wlan1"
> + ucidef_set_led_netdev "eth_act" "LAN act" "$model:green:eth_act" "lan" "tx rx"
> + ucidef_set_led_netdev "eth_link" "LAN link" "$model:green:eth_link" "lan" "link"
> ;;
> xzwifi,creativebox-v1)
> - ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan"
> + ucidef_set_led_netdev "internet" "internet" "$model:blue:internet" "wan"
> ;;
> xiaomi,redmi-router-ac2100)
> - ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "wan"
> + ucidef_set_led_netdev "wan" "wan" "$model:white:wan" "wan"
> ;;
> youhua,wr1200js)
> - ucidef_set_led_netdev "internet" "INTERNET" "$boardname:green:wan" "wan"
> + ucidef_set_led_netdev "internet" "INTERNET" "$model:green:wan" "wan"
> ;;
> esac
>
> diff --git a/target/linux/ramips/mt7621/base-files/etc/uci-defaults/04_led_migration b/target/linux/ramips/mt7621/base-files/etc/uci-defaults/04_led_migration
> index 73140fd7d5..98ae99f53d 100644
> --- a/target/linux/ramips/mt7621/base-files/etc/uci-defaults/04_led_migration
> +++ b/target/linux/ramips/mt7621/base-files/etc/uci-defaults/04_led_migration
> @@ -4,17 +4,17 @@
> . /lib/functions/migrations.sh
>
> board=$(board_name)
> -boardonly="${board##*,}"
> +model="${board##*,}"
>
> case "$board" in
> mikrotik,routerboard-750gr3)
> - migrate_leds "^rb750gr3:=$boardonly:"
> + migrate_leds "^rb750gr3:=$model:"
> mikrotik,routerboard-m11g)
> - migrate_leds "^rbm11g:=$boardonly:"
> + migrate_leds "^rbm11g:=$model:"
> mikrotik,routerboard-m33g)
> - migrate_leds "^rbm33g:=$boardonly:"
> + migrate_leds "^rbm33g:=$model:"
> netgear,wndr3700-v5)
> - migrate_leds "^wndr3700v5:=$boardonly:"
> + migrate_leds "^wndr3700v5:=$model:"
> ;;
>
> esac
> diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
> index c66e13d3c5..5dcd643dc8 100755
> --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
> +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
> @@ -9,7 +9,7 @@ set_wifi_led() {
>
>
> board=$(board_name)
> -boardname="${board##*,}"
> +model="${board##*,}"
>
> board_config_update
>
> @@ -18,84 +18,84 @@ led_wlan="$(get_dt_led wlan)"
>
> case $board in
> alfa-network,awusfree1)
> - set_wifi_led "$boardname:blue:wlan"
> + set_wifi_led "$model:blue:wlan"
> ;;
> cudy,wr1000)
> - ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
> - ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08"
> - ucidef_set_led_switch "lan2" "lan2" "$boardname:blue:lan2" "switch0" "0x04"
> + ucidef_set_led_switch "wan" "wan" "$model:blue:wan" "switch0" "0x10"
> + ucidef_set_led_switch "lan1" "lan1" "$model:blue:lan1" "switch0" "0x08"
> + ucidef_set_led_switch "lan2" "lan2" "$model:blue:lan2" "switch0" "0x04"
> ;;
> glinet,gl-mt300n-v2)
> - set_wifi_led "$boardname:red:wlan"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x1"
> + set_wifi_led "$model:red:wlan"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x1"
> ;;
> hilink,hlk-7628n|\
> skylab,skw92a)
> - set_wifi_led "$boardname:green:wlan"
> + set_wifi_led "$model:green:wlan"
> ;;
> hiwifi,hc5661a|\
> hiwifi,hc5761a)
> - ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10"
> + ucidef_set_led_switch "internet" "internet" "$model:blue:internet" "switch0" "0x10"
> ;;
> mediatek,linkit-smart-7688)
> ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt"
> ;;
> netgear,r6120)
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
> - ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x0f"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x10"
> + ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$model:green:wlan2g" "phy0tpt"
> ;;
> rakwireless,rak633)
> - set_wifi_led "$boardname:blue:wifi"
> + set_wifi_led "$model:blue:wifi"
> ;;
> tama,w06)
> - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
> - ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
> + ucidef_set_led_netdev "wan" "WAN" "$model:green:wan" "eth0"
> + ucidef_set_led_wlan "wlan" "WLAN" "$model:green:wlan" "phy0tpt"
> ;;
> tplink,archer-c20-v4|\
> tplink,archer-c20-v5)
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x1e"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x01"
> ;;
> tplink,archer-c50-v3|\
> tplink,archer-c50-v4)
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
> - ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt"
> - ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x1e"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x01"
> + ucidef_set_led_wlan "wlan2g" "wlan2g" "$model:green:wlan2g" "phy0tpt"
> + ucidef_set_led_wlan "wlan5g" "wlan5g" "$model:green:wlan5g" "phy1tpt"
> ;;
> tplink,re200-v2|\
> tplink,tl-mr3020-v3|\
> tplink,tl-wa801nd-v5)
> - ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
> + ucidef_set_led_netdev "lan" "lan" "$model:green:lan" "eth0"
> ;;
> tplink,tl-mr3420-v5|\
> tplink,tl-wr842n-v5)
> - ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
> + ucidef_set_led_wlan "wlan2g" "wlan2g" "$model:green:wlan" "phy0tpt"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x1e"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x01"
> ;;
> tplink,tl-wr840n-v4)
> - ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
> + ucidef_set_led_wlan "wlan2g" "wlan2g" "$model:green:wlan" "phy0tpt"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x1e"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x01"
> ;;
> tplink,tl-wr841n-v13)
> - ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
> - ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2"
> - ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4"
> - ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8"
> - ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
> + ucidef_set_led_wlan "wlan2g" "wlan2g" "$model:green:wlan" "phy0tpt"
> + ucidef_set_led_switch "lan1" "lan1" "$model:green:lan1" "switch0" "0x2"
> + ucidef_set_led_switch "lan2" "lan2" "$model:green:lan2" "switch0" "0x4"
> + ucidef_set_led_switch "lan3" "lan3" "$model:green:lan3" "switch0" "0x8"
> + ucidef_set_led_switch "lan4" "lan4" "$model:green:lan4" "switch0" "0x10"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x01"
> ;;
> tplink,tl-wr841n-v14)
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x1e"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x01"
> ;;
> tplink,tl-wr902ac-v3)
> - ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
> - ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10"
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
> + ucidef_set_led_wlan "wlan2g" "wlan2g" "$model:green:wlan" "phy0tpt"
> + ucidef_set_led_switch "lan" "lan" "$model:green:lan" "switch0" "0x10"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x10"
> ;;
> unielec,u7628-01-16m)
> ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2"
> @@ -106,28 +106,28 @@ unielec,u7628-01-16m)
> set_wifi_led "u7628-01:green:wlan"
> ;;
> wavlink,wl-wn570ha1)
> - ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
> + ucidef_set_led_switch "wan" "wan" "$model:green:wan" "switch0" "0x01"
> ucidef_set_rssimon "wlan0" "200000" "1"
> - ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49"
> - ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84"
> - ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100"
> - set_wifi_led "$boardname:green:wifi"
> + ucidef_set_led_rssi "wifi-low" "wifi-low" "$model:green:wifi-low" "wlan0" "1" "49"
> + ucidef_set_led_rssi "wifi-med" "wifi-med" "$model:green:wifi-med" "wlan0" "50" "84"
> + ucidef_set_led_rssi "wifi-high" "wifi-high" "$model:green:wifi-high" "wlan0" "85" "100"
> + set_wifi_led "$model:green:wifi"
> ;;
> wavlink,wl-wn575a3)
> ucidef_set_rssimon "wlan1" "200000" "1"
> - ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan1" "1" "49"
> - ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84"
> - ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100"
> + ucidef_set_led_rssi "wifi-low" "wifi-low" "$model:green:wifi-low" "wlan1" "1" "49"
> + ucidef_set_led_rssi "wifi-med" "wifi-med" "$model:green:wifi-med" "wlan1" "50" "84"
> + ucidef_set_led_rssi "wifi-high" "wifi-high" "$model:green:wifi-high" "wlan1" "85" "100"
> ;;
> zbtlink,zbt-we1226)
> - set_wifi_led "$boardname:green:wlan"
> - ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
> - ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02"
> - ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10"
> + set_wifi_led "$model:green:wlan"
> + ucidef_set_led_switch "lan1" "LAN1" "$model:green:lan1" "switch0" "0x01"
> + ucidef_set_led_switch "lan2" "LAN2" "$model:green:lan2" "switch0" "0x02"
> + ucidef_set_led_switch "wan" "WAN" "$model:green:wan" "switch0" "0x10"
> ;;
> zyxel,keenetic-extra-ii)
> - set_wifi_led "$boardname:green:wifi"
> - ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01"
> + set_wifi_led "$model:green:wifi"
> + ucidef_set_led_switch "internet" "internet" "$model:green:internet" "switch0" "0x01"
> ;;
> esac
>
> diff --git a/target/linux/ramips/rt288x/base-files/etc/board.d/01_leds b/target/linux/ramips/rt288x/base-files/etc/board.d/01_leds
> index a042ecfbda..a9f7145d7a 100755
> --- a/target/linux/ramips/rt288x/base-files/etc/board.d/01_leds
> +++ b/target/linux/ramips/rt288x/base-files/etc/board.d/01_leds
> @@ -9,7 +9,7 @@ set_wifi_led() {
>
>
> board=$(board_name)
> -boardname="${board##*,}"
> +model="${board##*,}"
>
> board_config_update
>
> @@ -22,7 +22,7 @@ airlink101,ar725w)
> set_wifi_led "rt2800soc-phy0::radio"
> ;;
> belkin,f5d8235-v1)
> - set_wifi_led "$boardname:blue:wireless"
> + set_wifi_led "$model:blue:wireless"
> ;;
> ralink,v11st-fe)
> set_wifi_led "rt2800pci-phy0::radio"
> diff --git a/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds
> index ae813e85d6..72485ee9a4 100755
> --- a/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds
> +++ b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds
> @@ -9,7 +9,7 @@ set_wifi_led() {
>
>
> board=$(board_name)
> -boardname="${board##*,}"
> +model="${board##*,}"
>
> board_config_update
>
> @@ -25,7 +25,7 @@ airlive,air3gii|\
> aximcom,mr-102n|\
> edimax,3g-6200nl|\
> netgear,wnce2001)
> - set_wifi_led "$boardname:green:wlan"
> + set_wifi_led "$model:green:wlan"
> ;;
> alfa-network,w502u|\
> dlink,dir-300-b1|\
> @@ -64,43 +64,43 @@ asiarf,awapn2403)
> set_wifi_led "rt2800soc-phy0::radio"
> ;;
> dlink,dcs-930l-b1)
> - ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps"
> + ucidef_set_led_netdev "wifi" "WiFi" "$model:blue:wps"
> ;;
> dlink,dir-620-d1|\
> trendnet,tew-714tru)
> - set_wifi_led "$boardname:green:wifi"
> + set_wifi_led "$model:green:wifi"
> ;;
> edimax,3g-6200n|\
> planex,mzk-w300nh2)
> - set_wifi_led "$boardname:amber:wlan"
> + set_wifi_led "$model:amber:wlan"
> ;;
> fon,fonera-20n)
> - set_wifi_led "$boardname:orange:wifi"
> + set_wifi_led "$model:orange:wifi"
> ;;
> hauppauge,broadway)
> - set_wifi_led "$boardname:red:wps_active"
> + set_wifi_led "$model:red:wps_active"
> ;;
> hootoo,ht-tm02)
> - ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0"
> - set_wifi_led "$boardname:blue:wlan"
> + ucidef_set_led_netdev "eth" "Ethernet" "$model:green:lan" "eth0"
> + set_wifi_led "$model:blue:wlan"
> ;;
> huawei,hg255d)
> - set_wifi_led "$boardname:green:wlan"
> - ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
> + set_wifi_led "$model:green:wlan"
> + ucidef_set_led_netdev "internet" "internet" "$model:green:internet" "eth0.2"
> ;;
> intenso,memory2move)
> - set_wifi_led "$boardname:blue:wifi"
> - ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0"
> + set_wifi_led "$model:blue:wifi"
> + ucidef_set_led_netdev "eth" "Ethernet" "$model:green:wan" "eth0"
> ;;
> omnima,miniembplug)
> - set_wifi_led "$boardname:red:wlan"
> + set_wifi_led "$model:red:wlan"
> ;;
> vocore,vocore-8m|\
> vocore,vocore-16m)
> ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
> ;;
> zorlik,zl5900v2)
> - ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0
> + ucidef_set_led_netdev "lan" "lan" "$model:green:lan" eth0
> ;;
> esac
>
> diff --git a/target/linux/ramips/rt3883/base-files/etc/board.d/01_leds b/target/linux/ramips/rt3883/base-files/etc/board.d/01_leds
> index 1a72112c6f..e921affb4b 100755
> --- a/target/linux/ramips/rt3883/base-files/etc/board.d/01_leds
> +++ b/target/linux/ramips/rt3883/base-files/etc/board.d/01_leds
> @@ -9,7 +9,7 @@ set_wifi_led() {
>
>
> board=$(board_name)
> -boardname="${board##*,}"
> +model="${board##*,}"
>
> board_config_update
>
> @@ -18,14 +18,14 @@ led_wlan="$(get_dt_led wlan)"
>
> case $board in
> belkin,f9k1109v1)
> - ucidef_set_led_netdev "lan" "lan" "$boardname:blue:wps" "eth0"
> + ucidef_set_led_netdev "lan" "lan" "$model:blue:wps" "eth0"
> ;;
> edimax,br-6475nd)
> - set_wifi_led "$boardname:amber:wlan"
> + set_wifi_led "$model:amber:wlan"
> ;;
> omnima,hpm)
> - ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
> - set_wifi_led "$boardname:green:wifi"
> + ucidef_set_led_netdev "eth" "ETH" "$model:green:eth" "eth0"
> + set_wifi_led "$model:green:wifi"
> ;;
> esac
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20200521/9b3807f6/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list