[OpenWrt-Devel] [PATCH 2/2] ipq40xx: replace "ok" with "okay" for status in DTS files
Adrian Schmutzler
freifunk at adrianschmutzler.de
Mon May 11 06:17:35 EDT 2020
While "ok" is recognized in DT parsing, only "okay" is actually
mentioned as valid value. Replace it accordingly.
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
.../arm/boot/dts/qcom-ipq4018-dap-2610.dts | 26 +++++++++----------
.../arch/arm/boot/dts/qcom-ipq4019-wpj419.dts | 2 +-
.../arch/arm/boot/dts/qcom-ipq4029-ap-303.dts | 2 +-
.../arm/boot/dts/qcom-ipq4029-ap-303h.dts | 2 +-
.../arm/boot/dts/qcom-ipq4018-dap-2610.dts | 26 +++++++++----------
.../arch/arm/boot/dts/qcom-ipq4019-wpj419.dts | 2 +-
.../arch/arm/boot/dts/qcom-ipq4029-ap-303.dts | 2 +-
.../arm/boot/dts/qcom-ipq4029-ap-303h.dts | 2 +-
...com-ipq4019-add-USB-devicetree-nodes.patch | 10 +++----
.../900-dts-ipq4019-ap-dk01.1.patch | 4 +--
...com-ipq4019-add-USB-devicetree-nodes.patch | 10 +++----
.../900-dts-ipq4019-ap-dk01.1.patch | 4 +--
12 files changed, 46 insertions(+), 46 deletions(-)
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
index 0fd4318527..17d9215544 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
+++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
@@ -19,7 +19,7 @@
soc {
edma at c080000 {
qcom,num_gmac = <1>;
- status = "ok";
+ status = "okay";
};
tcsr at 1949000 {
@@ -41,25 +41,25 @@
};
rng at 22000 {
- status = "ok";
+ status = "okay";
};
crypto at 8e3a000 {
- status = "ok";
+ status = "okay";
};
watchdog at b017000 {
- status = "ok";
+ status = "okay";
};
ess-switch at c000000 {
- status = "ok";
+ status = "okay";
switch_lan_bmp = <0x20>;
switch_wan_bmp = <0x00>;
};
ess-psgmii at 98000 {
- status = "ok";
+ status = "okay";
};
};
@@ -91,7 +91,7 @@
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash at 0 {
@@ -179,17 +179,17 @@
};
&blsp_dma {
- status = "ok";
+ status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
&cryptobam {
- status = "ok";
+ status = "okay";
};
&gmac0 {
@@ -201,7 +201,7 @@
};
&mdio {
- status = "ok";
+ status = "okay";
};
&tlmm {
@@ -231,11 +231,11 @@
};
&wifi0 {
- status = "ok";
+ status = "okay";
qcom,ath10k-calibration-variant = "dlink,dap-2610";
};
&wifi1 {
- status = "ok";
+ status = "okay";
qcom,ath10k-calibration-variant = "dlink,dap-2610";
};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
index 6cf9d46767..3a0e0b8cfa 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
+++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
@@ -275,7 +275,7 @@
i2c_0: i2c at 78b7000 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
serial at 78af000 {
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
index 24e5dc2809..bc4fd9eb17 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
+++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
@@ -88,7 +88,7 @@
i2c_0: i2c at 78b7000 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
tpm at 29 {
/* No Driver */
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
index 0859f97c9e..1f7a728492 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
+++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
@@ -87,7 +87,7 @@
i2c_0: i2c at 78b7000 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
tpm at 29 {
/* No Driver */
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
index 0fd4318527..17d9215544 100644
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
+++ b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
@@ -19,7 +19,7 @@
soc {
edma at c080000 {
qcom,num_gmac = <1>;
- status = "ok";
+ status = "okay";
};
tcsr at 1949000 {
@@ -41,25 +41,25 @@
};
rng at 22000 {
- status = "ok";
+ status = "okay";
};
crypto at 8e3a000 {
- status = "ok";
+ status = "okay";
};
watchdog at b017000 {
- status = "ok";
+ status = "okay";
};
ess-switch at c000000 {
- status = "ok";
+ status = "okay";
switch_lan_bmp = <0x20>;
switch_wan_bmp = <0x00>;
};
ess-psgmii at 98000 {
- status = "ok";
+ status = "okay";
};
};
@@ -91,7 +91,7 @@
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash at 0 {
@@ -179,17 +179,17 @@
};
&blsp_dma {
- status = "ok";
+ status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
&cryptobam {
- status = "ok";
+ status = "okay";
};
&gmac0 {
@@ -201,7 +201,7 @@
};
&mdio {
- status = "ok";
+ status = "okay";
};
&tlmm {
@@ -231,11 +231,11 @@
};
&wifi0 {
- status = "ok";
+ status = "okay";
qcom,ath10k-calibration-variant = "dlink,dap-2610";
};
&wifi1 {
- status = "ok";
+ status = "okay";
qcom,ath10k-calibration-variant = "dlink,dap-2610";
};
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
index 6cf9d46767..3a0e0b8cfa 100644
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
+++ b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
@@ -275,7 +275,7 @@
i2c_0: i2c at 78b7000 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
};
serial at 78af000 {
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
index 24e5dc2809..bc4fd9eb17 100644
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
+++ b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
@@ -88,7 +88,7 @@
i2c_0: i2c at 78b7000 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
tpm at 29 {
/* No Driver */
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
index 0859f97c9e..1f7a728492 100644
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
+++ b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
@@ -87,7 +87,7 @@
i2c_0: i2c at 78b7000 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
tpm at 29 {
/* No Driver */
diff --git a/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
index e02fdf59c2..30a0678fd8 100644
--- a/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
+++ b/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
@@ -19,23 +19,23 @@ Signed-off-by: John Crispin <john at phrozen.org>
};
+
+ usb3_ss_phy: ssphy at 9a000 {
-+ status = "ok";
++ status = "okay";
+ };
+
+ usb3_hs_phy: hsphy at a6000 {
-+ status = "ok";
++ status = "okay";
+ };
+
+ usb3: usb3 at 8af8800 {
-+ status = "ok";
++ status = "okay";
+ };
+
+ usb2_hs_phy: hsphy at a8000 {
-+ status = "ok";
++ status = "okay";
+ };
+
+ usb2: usb2 at 60f8800 {
-+ status = "ok";
++ status = "okay";
+ };
};
};
diff --git a/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch
index 48825375eb..5157079762 100644
--- a/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch
+++ b/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch
@@ -17,7 +17,7 @@
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-+ status = "ok";
++ status = "okay";
+ };
+
+ ess_tcsr at 1953000 {
@@ -77,7 +77,7 @@
+ };
+
usb3_ss_phy: ssphy at 9a000 {
- status = "ok";
+ status = "okay";
};
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
diff --git a/target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
index fbcbecf080..5efc08bcca 100644
--- a/target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
+++ b/target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
@@ -19,23 +19,23 @@ Signed-off-by: John Crispin <john at phrozen.org>
};
+
+ usb3_ss_phy: ssphy at 9a000 {
-+ status = "ok";
++ status = "okay";
+ };
+
+ usb3_hs_phy: hsphy at a6000 {
-+ status = "ok";
++ status = "okay";
+ };
+
+ usb3: usb3 at 8af8800 {
-+ status = "ok";
++ status = "okay";
+ };
+
+ usb2_hs_phy: hsphy at a8000 {
-+ status = "ok";
++ status = "okay";
+ };
+
+ usb2: usb2 at 60f8800 {
-+ status = "ok";
++ status = "okay";
+ };
};
};
diff --git a/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch
index 48825375eb..5157079762 100644
--- a/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch
+++ b/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch
@@ -17,7 +17,7 @@
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-+ status = "ok";
++ status = "okay";
+ };
+
+ ess_tcsr at 1953000 {
@@ -77,7 +77,7 @@
+ };
+
usb3_ss_phy: ssphy at 9a000 {
- status = "ok";
+ status = "okay";
};
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
--
2.20.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list