[OpenWrt-Devel] [PATCH 1/2] hostapd: update to latest Git hostap_2_9-1113-gc54a5e96b505

Stefan Lippers-Hollmann s.l-h at gmx.de
Sun May 10 00:27:43 EDT 2020


Hi

On 2020-05-04, Petr Štetiar wrote:
> Bump package to latest upstream Git HEAD which is commit c54a5e96b505
> ("Randomize GAS dialog token").  Since last update there was 1113
> commits done in the upstream tree with 537 files changed,
> 37874 insertions, 14159 deletions.

I've been testing this and Hauke's mac80211-5.6 branch 
(1c5b2569dd3e6465a53d8c112517496cef5fa294) on top of r13208-426fb8cf84.
On both ipq806x (nbg6817/ QCA9984/ ath10k, WDS-AP/ WPA2PSK/ CCMP + WPA3SAE
mixed) and ipq40xx (map-ac2200/ ipq4019/ ath10k, WDS-client/ WPA3SAE only),
I'm getting a constant (every 3s) stream of 

daemon.warn hostapd: nl80211: Not enough room for all AKM suites (num_suites=5 > NL80211_MAX_NR_AKM_SUITES)

warnings (WPA_ENABLE_WEP disabled).

ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
ath10k_pci 0000:01:00.0: firmware ver 10.4-3.10-00047 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 19ca6df2
ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 85498734
ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1

ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
ath10k_ahb a000000.wifi: firmware ver 10.4-3.6-00140 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 ba79b746
ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:20 crc32 e2dfaa91
ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1

Same results using ath10k-ct/ ct-htt firmware:

ath10k 5.1 driver, optimized for CT firmware, probing pci device: 0x46.
ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
ath10k_pci 0001:01:00.0: enabling bus mastering
ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9984-tH-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,no-bmiss-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 7d7b454d
ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 85498734
ath10k_pci 0001:01:00.0: unsupported HTC service id: 1536
ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
ath10k_pci 0001:01:00.0: wmi print 'free: 128704 iram: 15288 sram: 44212'
ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1

ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-tH-013-d81f62d97 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,htt-mgt-CT,set-special-CT,no-bmiss-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 a9217843
ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:20 crc32 e2dfaa91
ath10k_ahb a000000.wifi: unsupported HTC service id: 1536
ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
ath10k_ahb a000000.wifi: msdu-desc: 2500  skid: 32
ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
ath10k_ahb a000000.wifi: wmi print 'free: 88800 iram: 14696 sram: 47540'
ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1

Reverting just these two hostapd patches, but keeping the mac80211 bump, 
the warnings vanish immediately.

Regards
	Stefan Lippers-Hollmann

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list