[OpenWrt-Devel] Kernel hang on rk3328 at branch master
b.l.huang
banglang.huang at foxmail.com
Sun May 3 01:53:54 EDT 2020
Hi all,
I am trying to run openwrt on rk3328, but the kernel hanged when booting, below is the log.Any hints will be appreciated.
below is the boot log:
U-Boot 2020.01 (Apr 07 2020 - 11:55:14 +0000)
Model: Radxa Rockpi E
DRAM: 1022 MiB
PMIC: RK8050 (on=0x40, off=0x01)
MMC: rksdmmc at ff500000: 1, rksdmmc at ff520000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial at ff130000
Out: serial at ff130000
Err: serial at ff130000
Model: Radxa Rockpi E
Net: eth0: ethernet at ff540000
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
205 bytes read in 7 ms (28.3 KiB/s)
1: kernel-5.4
Retrieving file: /Image
7485448 bytes read in 330 ms (21.6 MiB/s)
append: earlycon=uart8250,mmio32,0xff130000 console=ttyS2,1500000n8 rw root=PARTUUID=b921b045-1d rootwait rootfstype=ext4 init=/sbin/init
Retrieving file: /rk3328-rockpi-e.dtb
33554 bytes read in 8 ms (4 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Device Tree to 000000003df1d000, end 000000003df28311 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.4.28 (rockpi at rockpi-dev) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r12776-437eb41f23)) #0 SMP Tue Apr 7 11:55:14 2020
[ 0.000000] Machine model: Radxa ROCK Pi E
[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 19 pages/cpu s38424 r8192 d31208 u77824
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257544
[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff130000 console=ttyS2,1500000n8 rw root=PARTUUID=b921b045-1d rootwait rootfstype=ext4 init=/sbin/init
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1018444K/1046528K available (5054K kernel code, 334K rwdata, 1244K rodata, 640K init, 281K bss, 28084K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x2dc/0x450 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001364] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.002340] pid_max: default: 32768 minimum: 301
[ 0.002974] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.003652] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.006176] ASID allocator initialised with 32768 entries
[ 0.006830] rcu: Hierarchical SRCU implementation.
[ 0.008053] smp: Bringing up secondary CPUs ...
[ 0.009041] Detected VIPT I-cache on CPU1
[ 0.009116] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.009772] Detected VIPT I-cache on CPU2
[ 0.009824] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.010419] Detected VIPT I-cache on CPU3
[ 0.010470] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.010560] smp: Brought up 1 node, 4 CPUs
[ 0.013820] SMP: Total of 4 processors activated.
[ 0.014247] CPU features: detected: 32-bit EL0 Support
[ 0.014716] CPU features: detected: CRC32 instructions
[ 0.015259] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.016014] CPU: All CPU(s) started at EL2
[ 0.016405] alternatives: patching kernel code
[ 0.027164] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.028111] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.028958] pinctrl core: initialized pinctrl subsystem
[ 0.029921] NET: Registered protocol family 16
[ 0.030843] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.057570] clocksource: Switched to clocksource arch_sys_counter
[ 0.059314] NET: Registered protocol family 2
[ 0.060322] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.061177] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.062007] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.062846] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.063595] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.064233] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.065109] NET: Registered protocol family 1
[ 0.067178] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.074664] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.075373] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.078229] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.080769] sdhci: Secure Digital Host Controller Interface driver
[ 0.081348] sdhci: Copyright(c) Pierre Ossman
[ 0.081810] Synopsys Designware Multimedia Card Interface Driver
[ 0.083165] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.083850] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
[ 0.084474] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
[ 0.085061] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo
[ 0.097703] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.110596] dwmmc_rockchip ff520000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.111286] dwmmc_rockchip ff520000.dwmmc: Using internal DMA controller.
[ 0.111938] dwmmc_rockchip ff520000.dwmmc: Version ID is 270a
[ 0.112521] dwmmc_rockchip ff520000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 0.113495] mmc_host mmc1: card is non-removable.
[ 0.126089] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.137798] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.139388] NET: Registered protocol family 10
[ 0.141170] Segment Routing with IPv6
[ 0.141691] NET: Registered protocol family 17
[ 0.142174] 8021q: 802.1Q VLAN Support v1.8
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list