[OpenWrt-Devel] [PATCH 1/4] Revert "ar71xx: fix Arduino Yun enabling of level shifters outputs"

[Sungbo Eo]

This reverts commit 077253dd666a30ae5231c3748222d4b5b138593d.

The output enable pins should be disabled by default, and only enabled when
used. Otherwise unwanted conflicts might occur between MCU and SoC pins.

Signed-off-by: Sungbo Eo <mans0n at gorani.run>
---
 target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
index e92f68f490..5873248edf 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
@@ -141,7 +141,7 @@ static void __init ds_setup(void)
 
 	// enable OE of level shifter
 	if (gpio_request_one(DS_GPIO_OE,
-	    GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0)
+	    GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0)
 		printk("Error setting GPIO OE\n");
 
 	if (gpio_request_one(DS_GPIO_UART_ENA,
@@ -150,7 +150,7 @@ static void __init ds_setup(void)
 
 	// enable OE of level shifter
 	if (gpio_request_one(DS_GPIO_OE2,
-	    GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, "OE-2") != 0)
+	    GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-2") != 0)
 		printk("Error setting GPIO OE2\n");
 }
 
-- 
2.25.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel