[PATCH 0/1] ipq806x: add support for Linksys E8350-v1
Todor Colov
todorcolov at abv.bg
Sat Jul 25 12:21:02 EDT 2020
Linksys E8350 is AC2350 (802.11ac Wave-2) router
Device specifications:
Architecture ARM (armv7l cortex-a15+neon vfpv4)
Vendor Linksys
Bootloader U-Boot
System-On-Chip Qualcomm IPQ8064 @ 1.4 GHz
CPU/Speed 2 x 1.4 GHz
Flash-Chips SPI MX25U3235F + NAND MT29F1G08ABBDAH4
Flash sizes 4 MiB SPI + 128 MiB NAND
RAM 512 MiB (491 MiB for the OS)
Wireless 1 Qualcomm QCA9880 2.4GHz 802.11bgn
Wireless 2 Quantenna QSR1000 5GHz 802.11ac ( driver not supported )
Ethernet 4 x 10/100/1000 Mbit/s w/ vlan support
Switch Qualcomm Atheros QCA8337
USB 1 x 3.0 + 1 x 2.0(combo with eSata port)
eSata 1 (combo with one of the USB ports)
Serial Yes|Not populated
JTAG Not populated
https://openwrt.org/inbox/toh/linksys/linksys_ea8350_1
Flashing instructions:
* Upgrade with factory image via web interface
Debricking:
Get the original firmware: https://downloads.linksys.com/downloads/firmware/FW_E8350_1.0.03.003_20180929.bin
1. power off the device and disconnect the WAN port. (Only LAN port to be connected)
2. press & hold the “Reset” button
3. power on the deiece & wait for 10 seconds with pressed “Reset” button
- the Router will open Firmware Recovery “http” server on IP: 192.168.1.1
4. set IP on your PC from 192.168.1.0/24 network ( Router is on IP 192.168.1.1 )
5. open in browser URL:
http://192.168.1.1/index.shtml
MAC addresses:
MAC address (as on device label) is stored in u-boot env
WLAN uses address incremented by 1.
Todor Colov (1):
ipq806x: Add support for Linksys E8350-v1
.../ipq806x/base-files/etc/board.d/01_leds | 3 +
.../ipq806x/base-files/etc/board.d/02_network | 1 +
.../base-files/lib/upgrade/platform.sh | 3 +-
.../arm/boot/dts/qcom-ipq8064-e8350-v1.dts | 246 ++++++++++++++++++
target/linux/ipq806x/image/Makefile | 29 +++
.../0069-arm-boot-add-dts-files.patch | 3 +-
6 files changed, 283 insertions(+), 2 deletions(-)
create mode 100644 target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-e8350-v1.dts
--
2.27.0
More information about the openwrt-devel
mailing list