[OpenWrt-Devel] [PATCH v4] ath79: add support for TP-Link TL-MR6400
Adrian Schmutzler
freifunk at adrianschmutzler.de
Fri Jan 17 07:15:52 EST 2020
From: Enrico Mioso <mrkiko.rs at gmail.com>
This device is an LTE router supported in ar71xx so far.
As per original commit, hardware specifications (v1.0 EU):
- SoC: QCA9531
- Flash: Winbond W25Q64FV (8MiB)
- RAM: EtronTech EM6AB160TSE-5G (64MiB)
- Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna)
- Ethernet: 2NIC (3x100M + 1x100M)
- WWAN: TP-LINK LTE MODULE (2x external detachable antenna)
- Power: DC 12V 1A
Flashing instructions:
You can flash via tftp recovery (serve factory image as /mr6400_tp_recovery.bin
on 192.168.0.66/24, connect to any ethernet port and power on device while
holding the reset button). Flashing via OEM web interface does not work.
Known issues:
- LTE module does not always come up during boot. This can be fixed by turning
it off and on again.
- As it happened occasionally in ar71xx, during bursty flash activity, LTE
module init will fail, with USB enumeration errors.
- eth1 (LAN) always shows carrier as 1 even if no cable is plugged in (this
works "correctly" on ar71xx)
Signed-off-by: Enrico Mioso <mrkiko.rs at gmail.com>
[rebase and several adjustments]
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
Tested-by: Filip Moc <lede at moc6.cz>
---
.../ath79/dts/qca9531_tplink_tl-mr6400-v1.dts | 167 ++++++++++++++++++
.../generic/base-files/etc/board.d/01_leds | 5 +
.../generic/base-files/etc/board.d/02_network | 5 +
target/linux/ath79/image/generic-tp-link.mk | 12 ++
4 files changed, 189 insertions(+)
create mode 100644 target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts
diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts b/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts
new file mode 100644
index 0000000000..7299257cda
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+ compatible = "tplink,tl-mr6400-v1", "qca,qca9531";
+ model = "TP-Link TL-MR6400 v1";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ label-mac-device = &wmac;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* D12 */
+ wan {
+ label = "tp-link:white:wan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* D11 */
+ 4g {
+ label = "tp-link:white:4g";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* D5 */
+ wps {
+ label = "tp-link:white:wps";
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* D3 */
+ wlan {
+ label = "tp-link:white:wlan";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ /* D2 */
+ led_power: power {
+ label = "tp-link:white:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* D4 */
+ lan {
+ label = "tp-link:white:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ /* SW2 */
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ /* SW3 */
+ rfkill {
+ label = "RF kill button";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_usb_power {
+ gpio-export,name = "tp-link:power:lte";
+ gpio-export,output = <0>;
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition at 20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0x7d0000>;
+ };
+
+ art: partition at 7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <1>;
+};
+
+ð1 {
+ mtd-mac-address = <&uboot 0x1fc00>;
+ mtd-mac-address-increment = <(-1)>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&uboot 0x1fc00>;
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port at 1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index de4e8b4a7f..1023ba7a39 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -215,6 +215,11 @@ tplink,re450-v2)
ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"
;;
+tplink,tl-mr6400-v1)
+ ucidef_set_led_switch "lan" "LAN" "tp-link:white:lan" "switch0" "0x0e"
+ ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1"
+ ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0"
+ ;;
tplink,tl-wr842n-v2)
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index a96b504d5a..0bae9dc384 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -236,6 +236,11 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0 at eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
;;
+ tplink,tl-mr6400-v1)
+ ucidef_set_interfaces_lan_wan "eth0.1 eth1" "usb0"
+ ucidef_add_switch "switch0" \
+ "0 at eth0" "1:lan:1" "2:lan:3" "3:lan:2"
+ ;;
tplink,tl-wr842n-v2)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index a7266f05a9..53138e343b 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -374,6 +374,18 @@ define Device/tplink_re450-v2
endef
TARGET_DEVICES += tplink_re450-v2
+define Device/tplink_tl-mr6400-v1
+ $(Device/tplink-8mlzma)
+ SOC := qca9531
+ DEVICE_MODEL := TL-MR6400
+ DEVICE_VARIANT := v1
+ TPLINK_HWID := 0x64000001
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial \
+ kmod-usb-serial-option adb-enablemodem
+ SUPPORTED_DEVICES += tl-mr6400
+endef
+TARGET_DEVICES += tplink_tl-mr6400-v1
+
define Device/tplink_tl-wdr3500-v1
$(Device/tplink-8mlzma)
SOC := ar9344
--
2.20.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list