[OpenWrt-Devel] Question: Migration from ar71xx to ath79
Baptiste Jonglez
baptiste at bitsofnetworks.org
Fri Jan 10 09:02:24 EST 2020
Good point, the ar71xx - ath79 migration needs more documentation.
I have just created https://openwrt.org/docs/guide-user/installation/ar71xx.to.ath79
but it needs some work: is sysupgrade supposed to work in some cases?
With/without saving the configuration? Is there any danger when forcing
upgrade with "sysupgrade -F"?
@Thomas: I saw that there are auto-generated pages listing ath79 devices,
it's very helpful:
https://openwrt.org/docs/techref/targets/ath79
https://openwrt.org/docs/techref/targets/ar71xx-ath79
What is the source used to generate them? Where could people add
important information about upgrading for a specific device? Would it be
better on the device pages themselves, or in a column of this table?
Thanks!
Baptiste
On 10-01-20, Pumr, Ondrej (EEK) wrote:
> Hello,
>
>
>
> I have TP-LINK TL-WR842N-V3 running OpenWrt 18.06 with ar71xx and I want to migrate to OpenWrt 19.07 with ath79.
>
>
>
> In the list of known issues it is written, that "Sysupgrade from ar71xx to ath79 and vice versa is not officially supported, a full manual reinstall is recommended...".
>
>
>
> I don't understand the meaning of "full manual reinstall", but I thing, that instead of upgrading the firmware via web interface with image "openwrt-19.07.0-ath79-generic-tplink_tl-wr842n-v3-squashfs-sysupgrade.bin" (size about 4 MB), it is recommended the upgrading via bootloader + TFTP with image "openwrt-19.07.0-ath79-generic-tplink_tl-wr842n-v3-squashfs-factory.bin" (size about 16 MB).
>
>
>
> I am right or does the "full manual reinstall" means another special procedure?
>
>
>
> Thank you
>
>
>
> Best regards
>
>
>
> Ondřej Pumr
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20200110/3f872a37/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list