[OpenWrt-Devel] [PATCH 2/5] ixp4xx: remove unmaintained target
Adrian Schmutzler
freifunk at adrianschmutzler.de
Sun Jan 5 11:38:10 EST 2020
This target is still on kernel 4.9, and it looks like there is no
active maintainer for this target anymore.
Remove the code and all the packages which are only used by this target.
To add this target to OpenWrt again port it to a recent and supported
kernel version.
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
package/boot/apex/Makefile | 62 -
.../boot/apex/patches/001-compile_fix.patch | 20 -
.../100-openwrt_nslu2_armeb_config.patch | 23 -
.../120-openwrt_nslu2_16mb_armeb_config.patch | 23 -
.../140-openwrt_fsg3_armeb_config.patch | 23 -
.../apex/patches/150-limit_ram_to_64mb.patch | 22 -
.../160-openwrt_nas100d_armeb_config.patch | 20 -
package/firmware/ixp4xx-microcode/Makefile | 59 -
.../ixp4xx-microcode/src/IxNpeMicrocode.h | 148 --
.../firmware/ixp4xx-microcode/src/LICENSE.IPL | 27 -
package/kernel/avila-wdt/Makefile | 34 -
package/kernel/avila-wdt/src/Makefile | 1 -
package/kernel/avila-wdt/src/avila-wdt.c | 231 --
package/kernel/linux/modules/sound.mk | 19 -
target/linux/ixp4xx/Makefile | 24 -
target/linux/ixp4xx/base-files/lib/ixp4xx.sh | 34 -
.../ixp4xx/base-files/lib/preinit/01_sysinfo | 9 -
.../lib/preinit/05_set_ether_mac_ixp4xx | 32 -
.../ixp4xx/base-files/lib/upgrade/platform.sh | 137 --
target/linux/ixp4xx/config-4.9 | 245 --
.../ixp4xx/generic/profiles/100-Default.mk | 17 -
.../generic/profiles/105-Atheros-ath5k.mk | 17 -
.../ixp4xx/generic/profiles/200-NSLU2.mk | 19 -
.../ixp4xx/generic/profiles/300-NAS100d.mk | 21 -
.../generic/profiles/400-DSMG600RevA.mk | 22 -
.../ixp4xx/generic/profiles/500-USR8200.mk | 19 -
target/linux/ixp4xx/generic/target.mk | 9 -
target/linux/ixp4xx/harddisk/config-default | 20 -
.../ixp4xx/harddisk/profiles/100-FSG3.mk | 20 -
target/linux/ixp4xx/harddisk/target.mk | 6 -
target/linux/ixp4xx/image/Makefile | 76 -
target/linux/ixp4xx/modules.mk | 74 -
...ohorent_dma_mask-for-ethernet-platfo.patch | 136 --
...se-parent-device-for-dma-allocations.patch | 95 -
.../patches-4.9/020-gateworks_i2c_pld.patch | 424 ----
.../patches-4.9/030-gpio_line_config.patch | 73 -
.../patches-4.9/040-arm_mach_types.patch | 18 -
.../090-increase_entropy_pools.patch | 17 -
...00-wg302v2_gateway7001_mac_plat_info.patch | 78 -
.../patches-4.9/105-wg302v1_support.patch | 261 --
.../110-pronghorn_series_support.patch | 393 ----
.../111-pronghorn_swap_uarts.patch | 44 -
.../patches-4.9/115-sidewinder_support.patch | 286 ---
.../116-sidewinder_fis_location.patch | 30 -
.../patches-4.9/120-compex_support.patch | 199 --
.../patches-4.9/130-wrt300nv2_support.patch | 227 --
.../131-wrt300nv2_mac_plat_info.patch | 42 -
.../patches-4.9/132-wrt300nv2_mac_fix.patch | 72 -
.../150-lanready_ap1000_support.patch | 201 --
.../151-lanready_ap1000_mac_plat_info.patch | 44 -
.../patches-4.9/160-delayed_uart_io.patch | 133 --
.../patches-4.9/162-wg302v1_mem_fixup.patch | 37 -
.../170-ixdpg425_mac_plat_info.patch | 51 -
.../175-avila_hss_audio_support.patch | 2093 -----------------
.../patches-4.9/180-tw5334_support.patch | 287 ---
.../patches-4.9/185-mi424wr_support.patch | 504 ----
.../patches-4.9/190-cambria_support.patch | 1131 ---------
...01-npe_driver_print_license_location.patch | 11 -
...05-npe_driver_separate_phy_functions.patch | 127 -
...-npe_driver_add_update_link_function.patch | 100 -
.../207-npe_driver_multiphy_support.patch | 153 --
.../patches-4.9/295-latch_led_driver.patch | 201 --
.../patches-4.9/300-avila_support.patch | 726 ------
.../304-ixp4xx_eth_jumboframe.patch | 80 -
.../patches-4.9/310-gtwx5717_spi_bus.patch | 57 -
.../311-gtwx5717_mac_plat_info.patch | 50 -
.../312-ixp4xx_pata_optimization.patch | 137 --
.../patches-4.9/500-usr8200_support.patch | 347 ---
.../patches-4.9/520-tw2662_support.patch | 316 ---
.../patches-4.9/530-ap42x_support.patch | 282 ---
.../patches-4.9/600-skb_avoid_dmabounce.patch | 23 -
.../900-ixp4xx-crypto-include-module.h.patch | 10 -
.../patches-4.9/910-ixp4xx-nr_irq_lines.patch | 22 -
73 files changed, 11031 deletions(-)
delete mode 100644 package/boot/apex/Makefile
delete mode 100644 package/boot/apex/patches/001-compile_fix.patch
delete mode 100644 package/boot/apex/patches/100-openwrt_nslu2_armeb_config.patch
delete mode 100644 package/boot/apex/patches/120-openwrt_nslu2_16mb_armeb_config.patch
delete mode 100644 package/boot/apex/patches/140-openwrt_fsg3_armeb_config.patch
delete mode 100644 package/boot/apex/patches/150-limit_ram_to_64mb.patch
delete mode 100644 package/boot/apex/patches/160-openwrt_nas100d_armeb_config.patch
delete mode 100644 package/firmware/ixp4xx-microcode/Makefile
delete mode 100644 package/firmware/ixp4xx-microcode/src/IxNpeMicrocode.h
delete mode 100644 package/firmware/ixp4xx-microcode/src/LICENSE.IPL
delete mode 100644 package/kernel/avila-wdt/Makefile
delete mode 100644 package/kernel/avila-wdt/src/Makefile
delete mode 100644 package/kernel/avila-wdt/src/avila-wdt.c
delete mode 100644 target/linux/ixp4xx/Makefile
delete mode 100644 target/linux/ixp4xx/base-files/lib/ixp4xx.sh
delete mode 100644 target/linux/ixp4xx/base-files/lib/preinit/01_sysinfo
delete mode 100644 target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx
delete mode 100644 target/linux/ixp4xx/base-files/lib/upgrade/platform.sh
delete mode 100644 target/linux/ixp4xx/config-4.9
delete mode 100644 target/linux/ixp4xx/generic/profiles/100-Default.mk
delete mode 100644 target/linux/ixp4xx/generic/profiles/105-Atheros-ath5k.mk
delete mode 100644 target/linux/ixp4xx/generic/profiles/200-NSLU2.mk
delete mode 100644 target/linux/ixp4xx/generic/profiles/300-NAS100d.mk
delete mode 100644 target/linux/ixp4xx/generic/profiles/400-DSMG600RevA.mk
delete mode 100644 target/linux/ixp4xx/generic/profiles/500-USR8200.mk
delete mode 100644 target/linux/ixp4xx/generic/target.mk
delete mode 100644 target/linux/ixp4xx/harddisk/config-default
delete mode 100644 target/linux/ixp4xx/harddisk/profiles/100-FSG3.mk
delete mode 100644 target/linux/ixp4xx/harddisk/target.mk
delete mode 100644 target/linux/ixp4xx/image/Makefile
delete mode 100644 target/linux/ixp4xx/modules.mk
delete mode 100644 target/linux/ixp4xx/patches-4.9/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/020-gateworks_i2c_pld.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/030-gpio_line_config.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/040-arm_mach_types.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/090-increase_entropy_pools.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/100-wg302v2_gateway7001_mac_plat_info.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/105-wg302v1_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/110-pronghorn_series_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/111-pronghorn_swap_uarts.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/115-sidewinder_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/116-sidewinder_fis_location.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/120-compex_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/130-wrt300nv2_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/131-wrt300nv2_mac_plat_info.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/132-wrt300nv2_mac_fix.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/150-lanready_ap1000_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/151-lanready_ap1000_mac_plat_info.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/160-delayed_uart_io.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/162-wg302v1_mem_fixup.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/170-ixdpg425_mac_plat_info.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/175-avila_hss_audio_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/180-tw5334_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/185-mi424wr_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/190-cambria_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/201-npe_driver_print_license_location.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/205-npe_driver_separate_phy_functions.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/206-npe_driver_add_update_link_function.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/207-npe_driver_multiphy_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/295-latch_led_driver.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/300-avila_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/304-ixp4xx_eth_jumboframe.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/310-gtwx5717_spi_bus.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/311-gtwx5717_mac_plat_info.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/312-ixp4xx_pata_optimization.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/500-usr8200_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/520-tw2662_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/530-ap42x_support.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/600-skb_avoid_dmabounce.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/900-ixp4xx-crypto-include-module.h.patch
delete mode 100644 target/linux/ixp4xx/patches-4.9/910-ixp4xx-nr_irq_lines.patch
diff --git a/package/boot/apex/Makefile b/package/boot/apex/Makefile
deleted file mode 100644
index 64c2426802..0000000000
--- a/package/boot/apex/Makefile
+++ /dev/null
@@ -1,62 +0,0 @@
-#
-# Copyright (C) 2006-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=apex
-PKG_VERSION:=1.6.9
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://downloads.openwrt.org/sources/
-PKG_HASH:=1d2bc04c2c6bb3d2d6c1916b6dc559cda2b1ecb045d7801fd49af6af4234abeb
-PKG_TARGETS:=bin
-
-include $(INCLUDE_DIR)/package.mk
-
-export GCC_HONOUR_COPTS=s
-
-define Package/apex
- SECTION:=boot
- CATEGORY:=Boot Loaders
- DEPENDS:=@TARGET_ixp4xx
- DEFAULT:=y
- TITLE:=Boot loader for NSLU2, FSG3, NAS100D and others
-endef
-
-define build_apex
- $(MAKE) -C $(PKG_BUILD_DIR) \
- ARCH=arm \
- $(1)_config
- $(MAKE) -C $(PKG_BUILD_DIR) \
- $(TARGET_CONFIGURE_OPTS) \
- KBUILD_HAVE_NLS=no \
- ARCH=arm \
- clean all
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/apex.bin $(PKG_BUILD_DIR)/out/apex-$(2).bin
-endef
-
-define Build/Compile
- $(INSTALL_DIR) $(PKG_BUILD_DIR)/out
- $(call build_apex,slugos-nslu2-armeb,nslu2-armeb)
- $(call build_apex,slugos-nslu2-16mb-armeb,nslu2-16mb-armeb)
- $(call build_apex,slugos-fsg3-armeb,fsg3-armeb)
- $(call build_apex,slugos-nas100d-armeb,nas100d-armeb)
-endef
-
-define Package/apex/install
- $(INSTALL_DIR) $(STAGING_DIR)/apex
- $(CP) $(PKG_BUILD_DIR)/out/*.bin $(1)/
-endef
-
-define Build/InstallDev
- $(INSTALL_DIR) $(STAGING_DIR_IMAGE)
- $(CP) $(PKG_BUILD_DIR)/out/*.bin $(STAGING_DIR_IMAGE)/
-endef
-
-$(eval $(call BuildPackage,apex))
diff --git a/package/boot/apex/patches/001-compile_fix.patch b/package/boot/apex/patches/001-compile_fix.patch
deleted file mode 100644
index 8a25de6570..0000000000
--- a/package/boot/apex/patches/001-compile_fix.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/Makefile
-+++ b/Makefile
-@@ -444,7 +444,7 @@ ifeq ($(config-targets),1)
- include $(srctree)/src/arch-$(SRCARCH)/Makefile
- export KBUILD_DEFCONFIG
-
--config %config: scripts_basic outputmakefile FORCE
-+%config: scripts_basic outputmakefile FORCE
- $(Q)mkdir -p include/linux include/config
- $(Q)$(MAKE) $(build)=scripts/kconfig $@
-
-@@ -1585,7 +1585,7 @@ endif
- $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
-
- # Modules
--/ %/: prepare scripts FORCE
-+%/: prepare scripts FORCE
- $(cmd_crmodverdir)
- $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
- $(build)=$(build-dir)
diff --git a/package/boot/apex/patches/100-openwrt_nslu2_armeb_config.patch b/package/boot/apex/patches/100-openwrt_nslu2_armeb_config.patch
deleted file mode 100644
index d598ff3287..0000000000
--- a/package/boot/apex/patches/100-openwrt_nslu2_armeb_config.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/src/mach-ixp42x/slugos-nslu2-armeb_config
-+++ b/src/mach-ixp42x/slugos-nslu2-armeb_config
-@@ -19,7 +19,7 @@ CONFIG_EXPERIMENTAL=y
- #
- # General Setup
- #
--CONFIG_TARGET_DESCRIPTION="SlugOS NSLU2 (bigendian)"
-+CONFIG_TARGET_DESCRIPTION="OpenWrt NSLU2 (8MiB Flash)"
- CONFIG_CROSS_COMPILE=""
- CONFIG_AEABI=y
- # CONFIG_DRIVER_LONG_LONG_SIZE is not set
-@@ -163,9 +163,9 @@ CONFIG_ENV_REGION_KERNEL_ALT="fis://kern
- # Overrides
- #
- CONFIG_ENV_DEFAULT_CMDLINE_OVERRIDE=y
--CONFIG_ENV_DEFAULT_CMDLINE="root=/dev/mtdblock4 rootfstype=jffs2 console=ttyS0,115200 init=/linuxrc"
-+CONFIG_ENV_DEFAULT_CMDLINE="root=/dev/mtdblock4 rootfstype=squashfs,jffs2 console=ttyS0,115200 init=/etc/preinit noinitrd"
- CONFIG_ENV_DEFAULT_CMDLINE_ALT_P=y
--CONFIG_ENV_DEFAULT_CMDLINE_ALT="root=/dev/mtdblock4 rootfstype=jffs2 console=ttyS0,115200 init=/linuxrc"
-+CONFIG_ENV_DEFAULT_CMDLINE_ALT="root=/dev/mtdblock4 rootfstype=squashfs,jffs2 console=ttyS0,115200 init=/etc/preinit noinitrd"
- # CONFIG_ENV_DEFAULT_STARTUP_OVERRIDE is not set
- # CONFIG_ENV_DEFAULT_STARTUP_ALT_P is not set
- CONFIG_USES_NOR_BOOTFLASH=y
diff --git a/package/boot/apex/patches/120-openwrt_nslu2_16mb_armeb_config.patch b/package/boot/apex/patches/120-openwrt_nslu2_16mb_armeb_config.patch
deleted file mode 100644
index 5e7ecee27c..0000000000
--- a/package/boot/apex/patches/120-openwrt_nslu2_16mb_armeb_config.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/src/mach-ixp42x/slugos-nslu2-16mb-armeb_config
-+++ b/src/mach-ixp42x/slugos-nslu2-16mb-armeb_config
-@@ -19,7 +19,7 @@ CONFIG_EXPERIMENTAL=y
- #
- # General Setup
- #
--CONFIG_TARGET_DESCRIPTION="SlugOS NSLU2/BE (16MiB Flash)"
-+CONFIG_TARGET_DESCRIPTION="OpenWrt NSLU2 (16MiB Flash)"
- CONFIG_CROSS_COMPILE=""
- CONFIG_AEABI=y
- # CONFIG_DRIVER_LONG_LONG_SIZE is not set
-@@ -163,9 +163,9 @@ CONFIG_ENV_REGION_KERNEL_ALT="fis://kern
- # Overrides
- #
- CONFIG_ENV_DEFAULT_CMDLINE_OVERRIDE=y
--CONFIG_ENV_DEFAULT_CMDLINE="root=/dev/mtdblock4 rootfstype=jffs2 console=ttyS0,115200 init=/linuxrc"
-+CONFIG_ENV_DEFAULT_CMDLINE="root=/dev/mtdblock4 rootfstype=squashfs,jffs2 console=ttyS0,115200 init=/etc/preinit noinitrd"
- CONFIG_ENV_DEFAULT_CMDLINE_ALT_P=y
--CONFIG_ENV_DEFAULT_CMDLINE_ALT="root=/dev/mtdblock4 rootfstype=jffs2 console=ttyS0,115200 init=/linuxrc"
-+CONFIG_ENV_DEFAULT_CMDLINE_ALT="root=/dev/mtdblock4 rootfstype=squashfs,jffs2 console=ttyS0,115200 init=/etc/preinit noinitrd"
- # CONFIG_ENV_DEFAULT_STARTUP_OVERRIDE is not set
- # CONFIG_ENV_DEFAULT_STARTUP_ALT_P is not set
- CONFIG_USES_NOR_BOOTFLASH=y
diff --git a/package/boot/apex/patches/140-openwrt_fsg3_armeb_config.patch b/package/boot/apex/patches/140-openwrt_fsg3_armeb_config.patch
deleted file mode 100644
index fc0e8b9f3d..0000000000
--- a/package/boot/apex/patches/140-openwrt_fsg3_armeb_config.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/src/mach-ixp42x/slugos-fsg3-armeb_config
-+++ b/src/mach-ixp42x/slugos-fsg3-armeb_config
-@@ -17,7 +17,7 @@ CONFIG_EXPERIMENTAL=y
- #
- # General Setup
- #
--CONFIG_TARGET_DESCRIPTION="SlugOS FSG3/BE"
-+CONFIG_TARGET_DESCRIPTION="OpenWrt FSG3"
- CONFIG_CROSS_COMPILE=""
- CONFIG_AEABI=y
- CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-@@ -148,9 +148,9 @@ CONFIG_ENV_REGION_KERNEL_ALT="fis://kern
- # Overrides
- #
- CONFIG_ENV_DEFAULT_CMDLINE_OVERRIDE=y
--CONFIG_ENV_DEFAULT_CMDLINE="root=/dev/sda1 rootdelay=10 console=ttyS0,115200"
-+CONFIG_ENV_DEFAULT_CMDLINE="root=/dev/sda1 rootdelay=10 console=ttyS0,115200 init=/etc/preinit noinitrd"
- CONFIG_ENV_DEFAULT_CMDLINE_ALT_P=y
--CONFIG_ENV_DEFAULT_CMDLINE_ALT="root=/dev/sda2 rootdelay=10 console=ttyS0,115200"
-+CONFIG_ENV_DEFAULT_CMDLINE_ALT="root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,115200 init=/etc/preinit noinitrd"
- # CONFIG_ENV_DEFAULT_STARTUP_OVERRIDE is not set
- # CONFIG_ENV_DEFAULT_STARTUP_ALT_P is not set
- CONFIG_USES_NOR_BOOTFLASH=y
diff --git a/package/boot/apex/patches/150-limit_ram_to_64mb.patch b/package/boot/apex/patches/150-limit_ram_to_64mb.patch
deleted file mode 100644
index 3e178166e1..0000000000
--- a/package/boot/apex/patches/150-limit_ram_to_64mb.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/src/mach-ixp42x/slugos-nslu2-armeb_config
-+++ b/src/mach-ixp42x/slugos-nslu2-armeb_config
-@@ -137,7 +137,7 @@ CONFIG_AUTOBOOT_DELAY=10
- CONFIG_ENV_STARTUP_KERNEL_COPY=y
- # CONFIG_ENV_REGION_KERNEL_SWAP is not set
- CONFIG_ENV_STARTUP_PREFIX_P=y
--CONFIG_ENV_STARTUP_PREFIX="sdram-init; memscan -u 0+256m"
-+CONFIG_ENV_STARTUP_PREFIX="sdram-init; memscan -u 0+64m"
-
- #
- # Regions
---- a/src/mach-ixp42x/slugos-nslu2-16mb-armeb_config
-+++ b/src/mach-ixp42x/slugos-nslu2-16mb-armeb_config
-@@ -137,7 +137,7 @@ CONFIG_AUTOBOOT_DELAY=10
- CONFIG_ENV_STARTUP_KERNEL_COPY=y
- # CONFIG_ENV_REGION_KERNEL_SWAP is not set
- CONFIG_ENV_STARTUP_PREFIX_P=y
--CONFIG_ENV_STARTUP_PREFIX="sdram-init; memscan -u 0+256m"
-+CONFIG_ENV_STARTUP_PREFIX="sdram-init; memscan -u 0+64m"
-
- #
- # Regions
diff --git a/package/boot/apex/patches/160-openwrt_nas100d_armeb_config.patch b/package/boot/apex/patches/160-openwrt_nas100d_armeb_config.patch
deleted file mode 100644
index e190964857..0000000000
--- a/package/boot/apex/patches/160-openwrt_nas100d_armeb_config.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/src/mach-ixp42x/slugos-nas100d-armeb_config
-+++ b/src/mach-ixp42x/slugos-nas100d-armeb_config
-@@ -19,7 +19,7 @@ CONFIG_EXPERIMENTAL=y
- #
- # General Setup
- #
--CONFIG_TARGET_DESCRIPTION="SlugOS NAS100D/BE"
-+CONFIG_TARGET_DESCRIPTION="OpenWrt NAS100D"
- CONFIG_CROSS_COMPILE=""
- CONFIG_AEABI=y
- # CONFIG_DRIVER_LONG_LONG_SIZE is not set
-@@ -158,7 +158,7 @@ CONFIG_ENV_REGION_KERNEL="fis://kernel"
- # Overrides
- #
- CONFIG_ENV_DEFAULT_CMDLINE_OVERRIDE=y
--CONFIG_ENV_DEFAULT_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS0,115200 init=/linuxrc"
-+CONFIG_ENV_DEFAULT_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 console=ttyS0,115200 init=/etc/preinit noinitrd"
- # CONFIG_ENV_DEFAULT_STARTUP_OVERRIDE is not set
- CONFIG_USES_NOR_BOOTFLASH=y
- CONFIG_RELOCATE_SIMPLE=y
diff --git a/package/firmware/ixp4xx-microcode/Makefile b/package/firmware/ixp4xx-microcode/Makefile
deleted file mode 100644
index 78fedfd1aa..0000000000
--- a/package/firmware/ixp4xx-microcode/Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# Copyright (C) 2007 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ixp4xx-microcode
-PKG_VERSION:=2.4
-PKG_RELEASE:=2
-
-PKG_SOURCE:=IPL_ixp400NpeLibraryWithCrypto-2_4.zip
-PKG_SOURCE_URL:=http://downloads.openwrt.org/sources
-PKG_HASH:=1b1170d0657847248589d946048c0aeaa9cd671966fc5bec5933283309485eaa
-
-PKG_FLAGS:=nonshared
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ixp4xx-microcode
- SECTION:=net
- CATEGORY:=Network
- TITLE:=Microcode for the IXP4xx network engines
- DEPENDS:=@TARGET_ixp4xx
-endef
-
-define Package/ixp4xx-microcode/description
- This package contains the microcode needed to use the network engines in IXP4xx CPUs
-endef
-
-define Build/Prepare
- rm -rf $(PKG_BUILD_DIR)
- mkdir -p $(PKG_BUILD_DIR)
- unzip -d $(PKG_BUILD_DIR)/ $(DL_DIR)/$(PKG_SOURCE)
- mv $(PKG_BUILD_DIR)/ixp400_xscale_sw/src/npeDl/IxNpeMicrocode.c $(PKG_BUILD_DIR)/
- rm -rf $(PKG_BUILD_DIR)/ixp400_xscale_sw
- $(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
- (cd $(PKG_BUILD_DIR); \
- $(HOSTCC) -Wall -I$(STAGING_DIR_HOST)/include IxNpeMicrocode.c -o IxNpeMicrocode; \
- ./IxNpeMicrocode -be \
- )
-endef
-
-define Package/ixp4xx-microcode/install
- $(INSTALL_DIR) $(1)/lib/firmware
- $(INSTALL_DIR) $(1)/usr/share/doc
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/NPE-A $(1)/lib/firmware/
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/NPE-A-HSS $(1)/lib/firmware/
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/NPE-B $(1)/lib/firmware/
- $(INSTALL_BIN) $(PKG_BUILD_DIR)/NPE-C $(1)/lib/firmware/
- $(INSTALL_DATA) $(PKG_BUILD_DIR)/LICENSE.IPL $(1)/usr/share/doc/
-endef
-
-$(eval $(call BuildPackage,ixp4xx-microcode))
diff --git a/package/firmware/ixp4xx-microcode/src/IxNpeMicrocode.h b/package/firmware/ixp4xx-microcode/src/IxNpeMicrocode.h
deleted file mode 100644
index 4a843db104..0000000000
--- a/package/firmware/ixp4xx-microcode/src/IxNpeMicrocode.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * IxNpeMicrocode.h - Headerfile for compiling the Intel microcode C file
- *
- * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt at innominate.com>
- *
- * This file is released under the GPLv2
- *
- *
- * compile with
- *
- * gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode
- *
- * Executing the resulting binary on your build-host creates the
- * "NPE-[ABC].xxxxxxxx" files containing the selected microcode
- *
- * fetch the IxNpeMicrocode.c from the Intel Access Library.
- * It will include this header.
- *
- * select Images for every NPE from the following
- * (used C++ comments for easy uncommenting ....)
- */
-
-// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
-// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
-// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB
-// #define IX_NPEDL_NPEIMAGE_NPEA_HSS_TSLOT_SWITCH
-#define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
-// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
-// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL
-#define IX_NPEDL_NPEIMAGE_NPEA_HSS_2_PORT
-// #define IX_NPEDL_NPEIMAGE_NPEA_DMA
-// #define IX_NPEDL_NPEIMAGE_NPEA_ATM_MPHY_12_PORT
-// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_MPHY_1_PORT
-// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_SPHY_1_PORT
-// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0
-// #define IX_NPEDL_NPEIMAGE_NPEA_WEP
-
-
-// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
-// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
-// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB
-// #define IX_NPEDL_NPEIMAGE_NPEB_DMA
-#define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
-// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
-// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL
-
-
-// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
-// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
-// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB
-// #define IX_NPEDL_NPEIMAGE_NPEC_DMA
-// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_SPAN
-// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_FIREWALL
-#define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_CCM_ETH
-// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_CCM_EXTSHA_ETH
-// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_ETH_LEARN_FILTER_SPAN_FIREWALL
-// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
-// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
-// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL
-
-
-#include <stdio.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <netinet/in.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <endian.h>
-#include <byteswap.h>
-#include <string.h>
-
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-#define to_le32(x) (x)
-#define to_be32(x) bswap_32(x)
-#else
-#define to_be32(x) (x)
-#define to_le32(x) bswap_32(x)
-#endif
-
-struct dl_image {
- unsigned magic;
- unsigned id;
- unsigned size;
- unsigned data[0];
-};
-
-const unsigned IxNpeMicrocode_array[];
-
-int main(int argc, char *argv[])
-{
- struct dl_image *image = (struct dl_image *)IxNpeMicrocode_array;
- int imgsiz, i, fd, cnt;
- const unsigned *arrayptr = IxNpeMicrocode_array;
- const char *names[] = { "IXP425", "IXP465", "unknown" };
- int bigendian = 1;
-
- if (argc > 1) {
- if (!strcmp(argv[1], "-le"))
- bigendian = 0;
- else if (!strcmp(argv[1], "-be"))
- bigendian = 1;
- else {
- printf("Usage: %s <-le|-be>\n", argv[0]);
- return EXIT_FAILURE;
- }
- }
-
- for (image = (struct dl_image *)arrayptr, cnt=0;
- (image->id != 0xfeedf00d) && (image->magic == 0xfeedf00d);
- image = (struct dl_image *)(arrayptr), cnt++)
- {
- unsigned char field[4];
- imgsiz = image->size + 3;
- *(unsigned*)field = to_be32(image->id);
- char filename[40], slnk[10];
-
- sprintf(filename, "NPE-%c.%08x", (field[0] & 0xf) + 'A',
- image->id);
- if (image->id == 0x00090000)
- sprintf(slnk, "NPE-%c-HSS", (field[0] & 0xf) + 'A');
- else
- sprintf(slnk, "NPE-%c", (field[0] & 0xf) + 'A');
-
- printf("Writing image: %s.NPE_%c Func: %2x Rev: %02x.%02x "
- "Size: %5d to: '%s'\n",
- names[field[0] >> 4], (field[0] & 0xf) + 'A',
- field[1], field[2], field[3], imgsiz*4, filename);
- fd = open(filename, O_CREAT | O_RDWR | O_TRUNC, 0644);
- if (fd >= 0) {
- for (i=0; i<imgsiz; i++) {
- *(unsigned*)field = bigendian ?
- to_be32(arrayptr[i]) :
- to_le32(arrayptr[i]);
- write(fd, field, sizeof(field));
- }
- close(fd);
- unlink(slnk);
- symlink(filename, slnk);
- } else {
- perror(filename);
- }
- arrayptr += imgsiz;
- }
- close(fd);
- return 0;
-}
diff --git a/package/firmware/ixp4xx-microcode/src/LICENSE.IPL b/package/firmware/ixp4xx-microcode/src/LICENSE.IPL
deleted file mode 100644
index dad2566cfc..0000000000
--- a/package/firmware/ixp4xx-microcode/src/LICENSE.IPL
+++ /dev/null
@@ -1,27 +0,0 @@
-INTEL(R) SOFTWARE LICENSE AGREEMENT
-
-Copyright (c) 2007, Intel Corporation.
-All rights reserved.
-
-Redistribution. Redistribution and use in binary form, without modification, are permitted
-provided that the following conditions are met:
-o Redistributions must reproduce the above copyright notice and the following disclaimer in the
-documentation and/or other materials provided with the distribution.
-o Neither the name of Intel Corporation nor the names of its suppliers may be used to endorse
-or promote products derived from this software without specific prior written permission.
-o No reverse engineering, decompilation, or disassembly of this software is permitted.
-
-Limited patent license. Intel Corporation grants a world-wide, royalty-free, non-exclusive
-license under patents it now or hereafter owns or controls to make, have made, use, import,
-offer to sell and sell (.Utilize.) this software, but solely to the extent that any such patent is
-necessary to Utilize the software alone. The patent license shall not apply to any combinations
-which include this software. No hardware per se is licensed hereunder.
-DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
-OF SUCH DAMAGE.
diff --git a/package/kernel/avila-wdt/Makefile b/package/kernel/avila-wdt/Makefile
deleted file mode 100644
index a91c93374c..0000000000
--- a/package/kernel/avila-wdt/Makefile
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# Copyright (C) 2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=avila-wdt
-PKG_RELEASE:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/avila-wdt
- SUBMENU:=Other modules
- TITLE:=GPIO hardware watchdog driver for modified Avila boards
- DEPENDS:=@GPIO_SUPPORT @TARGET_ixp4xx
- FILES:=$(PKG_BUILD_DIR)/avila-wdt.ko
- AUTOLOAD:=$(call AutoLoad,10,avila-wdt)
-endef
-
-MAKE_OPTS:= \
- $(KERNEL_MAKE_FLAGS) \
- SUBDIRS="$(PKG_BUILD_DIR)"
-
-define Build/Compile
- $(MAKE) -C "$(LINUX_DIR)" \
- $(MAKE_OPTS) \
- modules
-endef
-
-$(eval $(call KernelPackage,avila-wdt))
diff --git a/package/kernel/avila-wdt/src/Makefile b/package/kernel/avila-wdt/src/Makefile
deleted file mode 100644
index 90d90657ed..0000000000
--- a/package/kernel/avila-wdt/src/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-m := avila-wdt.o
diff --git a/package/kernel/avila-wdt/src/avila-wdt.c b/package/kernel/avila-wdt/src/avila-wdt.c
deleted file mode 100644
index 22a3d6c7ea..0000000000
--- a/package/kernel/avila-wdt/src/avila-wdt.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * avila-wdt.c
- * Copyright (C) 2009 Felix Fietkau <nbd at nbd.name>
- *
- * based on:
- * drivers/char/watchdog/ixp4xx_wdt.c
- *
- * Watchdog driver for Intel IXP4xx network processors
- *
- * Author: Deepak Saxena <dsaxena at plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc.
- * Based on sa1100 driver, Copyright (C) 2000 Oleg Drokin <green at crimea.edu>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/uaccess.h>
-#include <mach/hardware.h>
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-static int heartbeat = 20; /* (secs) Default is 20 seconds */
-static unsigned long wdt_status;
-static atomic_t wdt_counter;
-struct timer_list wdt_timer;
-
-#define WDT_IN_USE 0
-#define WDT_OK_TO_CLOSE 1
-#define WDT_RUNNING 2
-
-static void wdt_refresh(unsigned long data)
-{
- if (test_bit(WDT_RUNNING, &wdt_status)) {
- if (atomic_dec_and_test(&wdt_counter)) {
- printk(KERN_WARNING "Avila watchdog expired, expect a reboot soon!\n");
- clear_bit(WDT_RUNNING, &wdt_status);
- return;
- }
- }
-
- /* strobe to the watchdog */
- gpio_line_set(14, IXP4XX_GPIO_HIGH);
- gpio_line_set(14, IXP4XX_GPIO_LOW);
-
- mod_timer(&wdt_timer, jiffies + msecs_to_jiffies(500));
-}
-
-static void wdt_enable(void)
-{
- atomic_set(&wdt_counter, heartbeat * 2);
-
- /* Disable clock generator output on GPIO 14/15 */
- *IXP4XX_GPIO_GPCLKR &= ~(1 << 8);
-
- /* activate GPIO 14 out */
- gpio_line_config(14, IXP4XX_GPIO_OUT);
- gpio_line_set(14, IXP4XX_GPIO_LOW);
-
- if (!test_bit(WDT_RUNNING, &wdt_status))
- wdt_refresh(0);
- set_bit(WDT_RUNNING, &wdt_status);
-}
-
-static void wdt_disable(void)
-{
- /* Re-enable clock generator output on GPIO 14/15 */
- *IXP4XX_GPIO_GPCLKR |= (1 << 8);
-}
-
-static int avila_wdt_open(struct inode *inode, struct file *file)
-{
- if (test_and_set_bit(WDT_IN_USE, &wdt_status))
- return -EBUSY;
-
- clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
- wdt_enable();
- return nonseekable_open(inode, file);
-}
-
-static ssize_t
-avila_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-{
- if (len) {
- if (!nowayout) {
- size_t i;
-
- clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-
- for (i = 0; i != len; i++) {
- char c;
-
- if (get_user(c, data + i))
- return -EFAULT;
- if (c == 'V')
- set_bit(WDT_OK_TO_CLOSE, &wdt_status);
- }
- }
- wdt_enable();
- }
- return len;
-}
-
-static struct watchdog_info ident = {
- .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
- WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
- .identity = "Avila Watchdog",
-};
-
-
-static long avila_wdt_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int ret = -ENOTTY;
- int time;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- ret = copy_to_user((struct watchdog_info *)arg, &ident,
- sizeof(ident)) ? -EFAULT : 0;
- break;
-
- case WDIOC_GETSTATUS:
- ret = put_user(0, (int *)arg);
- break;
-
- case WDIOC_KEEPALIVE:
- wdt_enable();
- ret = 0;
- break;
-
- case WDIOC_SETTIMEOUT:
- ret = get_user(time, (int *)arg);
- if (ret)
- break;
-
- if (time <= 0 || time > 60) {
- ret = -EINVAL;
- break;
- }
-
- heartbeat = time;
- wdt_enable();
- /* Fall through */
-
- case WDIOC_GETTIMEOUT:
- ret = put_user(heartbeat, (int *)arg);
- break;
- }
- return ret;
-}
-
-static int avila_wdt_release(struct inode *inode, struct file *file)
-{
- if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
- wdt_disable();
- else
- printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
- "timer will not stop\n");
- clear_bit(WDT_IN_USE, &wdt_status);
- clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
-
- return 0;
-}
-
-
-static const struct file_operations avila_wdt_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = avila_wdt_write,
- .unlocked_ioctl = avila_wdt_ioctl,
- .open = avila_wdt_open,
- .release = avila_wdt_release,
-};
-
-static struct miscdevice avila_wdt_miscdev = {
- .minor = WATCHDOG_MINOR + 1,
- .name = "avila_watchdog",
- .fops = &avila_wdt_fops,
-};
-
-static int __init avila_wdt_init(void)
-{
- int ret;
-
- init_timer(&wdt_timer);
- wdt_timer.expires = 0;
- wdt_timer.data = 0;
- wdt_timer.function = wdt_refresh;
- ret = misc_register(&avila_wdt_miscdev);
- if (ret == 0)
- printk(KERN_INFO "Avila Watchdog Timer: heartbeat %d sec\n",
- heartbeat);
- return ret;
-}
-
-static void __exit avila_wdt_exit(void)
-{
- misc_deregister(&avila_wdt_miscdev);
- del_timer(&wdt_timer);
- wdt_disable();
-}
-
-
-module_init(avila_wdt_init);
-module_exit(avila_wdt_exit);
-
-MODULE_AUTHOR("Felix Fietkau <nbd at nbd.name>");
-MODULE_DESCRIPTION("Gateworks Avila Hardware Watchdog");
-
-module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 20s)");
-
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-
diff --git a/package/kernel/linux/modules/sound.mk b/package/kernel/linux/modules/sound.mk
index c83e553d8f..aa7eb72756 100644
--- a/package/kernel/linux/modules/sound.mk
+++ b/package/kernel/linux/modules/sound.mk
@@ -255,25 +255,6 @@ endef
$(eval $(call KernelPackage,sound-soc-imx-sgtl5000))
-define KernelPackage/sound-soc-gw_avila
- TITLE:=Gateworks Avila SoC sound support
- KCONFIG:= \
- CONFIG_SND_GW_AVILA_SOC \
- CONFIG_SND_GW_AVILA_SOC_PCM \
- CONFIG_SND_GW_AVILA_SOC_HSS
- FILES:= \
- $(LINUX_DIR)/sound/soc/codecs/snd-soc-tlv320aic3x.ko \
- $(LINUX_DIR)/sound/soc/gw-avila/snd-soc-gw-avila.ko \
- $(LINUX_DIR)/sound/soc/gw-avila/snd-soc-gw-avila-pcm.ko \
- $(LINUX_DIR)/sound/soc/gw-avila/snd-soc-gw-avila-hss.ko
- AUTOLOAD:=$(call AutoLoad,65,snd-soc-tlv320aic3x snd-soc-gw-avila snd-soc-gw-avila-pcm snd-soc-gw-avila-hss)
- DEPENDS:=@TARGET_ixp4xx +kmod-sound-soc-core
- $(call AddDepends/sound)
-endef
-
-$(eval $(call KernelPackage,sound-soc-gw_avila))
-
-
define KernelPackage/pcspkr
DEPENDS:=@TARGET_x86 +kmod-input-core
TITLE:=PC speaker support
diff --git a/target/linux/ixp4xx/Makefile b/target/linux/ixp4xx/Makefile
deleted file mode 100644
index e1964331a0..0000000000
--- a/target/linux/ixp4xx/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# Copyright (C) 2006-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=armeb
-BOARD:=ixp4xx
-BOARDNAME:=Intel IXP4xx
-FEATURES:=squashfs
-MAINTAINER:=Ted Hess <thess at kitschensync.net>, \
- Imre Kaloz <kaloz at openwrt.org>
-SUBTARGETS:=generic harddisk
-
-KERNEL_PATCHVER:=4.9
-
-include $(INCLUDE_DIR)/target.mk
-
-DEFAULT_PACKAGES += ixp4xx-microcode fconfig
-KERNELNAME:=zImage
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/ixp4xx/base-files/lib/ixp4xx.sh b/target/linux/ixp4xx/base-files/lib/ixp4xx.sh
deleted file mode 100644
index 3f73dd98e0..0000000000
--- a/target/linux/ixp4xx/base-files/lib/ixp4xx.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2012 OpenWrt.org
-#
-
-IXP4XX_BOARD_NAME=
-IXP4XX_MODEL=
-
-ixp4xx_board_detect() {
- local machine
- local name
-
- machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /Hardware/ {print $2}' /proc/cpuinfo)
-
- case "$machine" in
- "Gateworks Cambria"*)
- name="cambria"
- ;;
- "Gateworks Avila"*)
- name="avila"
- ;;
- *)
- name="generic";
- ;;
- esac
-
- [ -z "$IXP4XX_BOARD_NAME" ] && IXP4XX_BOARD_NAME="$name"
- [ -z "$IXP4XX_MODEL" ] && IXP4XX_MODEL="$machine"
-
- [ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
-
- echo "$IXP4XX_BOARD_NAME" > /tmp/sysinfo/board_name
- echo "$IXP4XX_MODEL" > /tmp/sysinfo/model
-}
diff --git a/target/linux/ixp4xx/base-files/lib/preinit/01_sysinfo b/target/linux/ixp4xx/base-files/lib/preinit/01_sysinfo
deleted file mode 100644
index 7699e9a10e..0000000000
--- a/target/linux/ixp4xx/base-files/lib/preinit/01_sysinfo
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-do_sysinfo_ixp4xx() {
- . /lib/ixp4xx.sh
-
- ixp4xx_board_detect
-}
-
-boot_hook_add preinit_main do_sysinfo_ixp4xx
diff --git a/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx b/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx
deleted file mode 100644
index adda197b59..0000000000
--- a/target/linux/ixp4xx/base-files/lib/preinit/05_set_ether_mac_ixp4xx
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-set_ether_mac() {
-
- RB_CONFIG="$(grep "RedBoot config" /proc/mtd | cut -d: -f1)"
-
- for npe in eth0 eth1 eth2
- do
- if [ "$(ifconfig $npe 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
- ifconfig $npe hw ether $(fconfig -s -r -d /dev/$RB_CONFIG -n npe_"$npe"_esa)
- fi
- done
-
- # Some developers should be shot on sight at Zcom/Netgear
- # -- Fixup for the WG302v1, need someone with a WAG302v1 to fix that, too
-
- if [ "$(ifconfig eth0 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
- ifconfig eth0 hw ether $(fconfig -s -r -d /dev/$RB_CONFIG -n zcom_npe_esa)
- fi
-
- # Others (*cough*, Tonze) are dumb enough to not handle mac addresses at all
-
- if [ "$(ifconfig eth0 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
- ifconfig eth0 hw ether 00:11:22:33:44:55
- fi
- if [ "$(ifconfig eth1 2>/dev/null | grep -c 00:00:00:00:00:00)" = "1" ]; then
- ifconfig eth1 hw ether 00:11:22:33:44:56
- fi
-}
-
-boot_hook_add preinit_main set_ether_mac
-
diff --git a/target/linux/ixp4xx/base-files/lib/upgrade/platform.sh b/target/linux/ixp4xx/base-files/lib/upgrade/platform.sh
deleted file mode 100644
index f83aa430cf..0000000000
--- a/target/linux/ixp4xx/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,137 +0,0 @@
-CI_BLKSZ=65536
-CI_LDADR=0x00800000
-
-platform_find_partitions() {
- local first dev size erasesize name
- while read dev size erasesize name; do
- name=${name#'"'}; name=${name%'"'}
- case "$name" in
- vmlinux.bin.l7|kernel|linux|rootfs)
- if [ -z "$first" ]; then
- first="$name"
- else
- echo "$erasesize:$first:$name"
- break
- fi
- ;;
- esac
- done < /proc/mtd
-}
-
-platform_find_kernelpart() {
- local part
- for part in "${1%:*}" "${1#*:}"; do
- case "$part" in
- vmlinux.bin.l7|kernel|linux)
- echo "$part"
- break
- ;;
- esac
- done
-}
-
-platform_find_part_size() {
- local first dev size erasesize name
- while read dev size erasesize name; do
- name=${name#'"'}; name=${name%'"'}
- [ "$name" = "$1" ] && {
- echo "$size"
- break
- }
- done < /proc/mtd
-}
-
-platform_do_upgrade_combined() {
- local partitions=$(platform_find_partitions)
- local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
- local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}"
- local kern_part_size=0x$(platform_find_part_size "$kernelpart")
- local kern_part_blocks=$(($kern_part_size / $CI_BLKSZ))
- local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
- local kern_blocks=$(($kern_length / $CI_BLKSZ))
- local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ))
-
- v "platform_do_upgrade_combined"
- v "partitions=$partitions"
- v "kernelpart=$kernelpart"
- v "kernel_part_size=$kern_part_size"
- v "kernel_part_blocks=$kern_part_blocks"
- v "kern_length=$kern_length"
- v "erase_size=$erase_size"
- v "kern_blocks=$kern_blocks"
- v "root_blocks=$root_blocks"
- v "kern_pad_blocks=$(($kern_part_blocks-$kern_blocks))"
-
- if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \
- [ ${kern_blocks:-0} -gt 0 ] && \
- [ ${root_blocks:-0} -gt 0 ] && \
- [ ${erase_size:-0} -gt 0 ];
- then
- local append=""
- [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP"
-
- # write the kernel
- dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null | \
- mtd -F$kernelpart:$kern_part_size:$CI_LDADR write - $kernelpart
- # write the rootfs
- dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null | \
- mtd $append write - rootfs
- else
- echo "invalid image"
- fi
-}
-
-platform_check_image() {
- local board=$(board_name)
- local magic="$(get_magic_word "$1")"
- local partitions=$(platform_find_partitions)
- local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
- local kern_part_size=0x$(platform_find_part_size "$kernelpart")
- local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
-
- [ "$#" -gt 1 ] && return 1
-
- case "$board" in
- avila | cambria )
- [ "$magic" != "4349" ] && {
- echo "Invalid image. Use *-sysupgrade.bin files on this board"
- return 1
- }
-
- kern_length_b=$(printf '%d' $kern_length)
- kern_part_size_b=$(printf '%d' $kern_part_size)
- if [ $kern_length_b -gt $kern_part_size_b ]; then
- echo "Invalid image. Kernel size ($kern_length) exceeds kernel partition ($kern_part_size)"
- return 1
- fi
-
- local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null)
- local md5_chk=$(dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}"
- if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then
- return 0
- else
- echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)"
- return 1
- fi
-
- return 0
- ;;
- esac
-
- echo "Sysupgrade is not yet supported on $board."
- return 1
-}
-
-platform_do_upgrade() {
- local board=$(board_name)
-
- v "board=$board"
- case "$board" in
- avila | cambria )
- platform_do_upgrade_combined "$1"
- ;;
- *)
- default_do_upgrade "$1"
- ;;
- esac
-}
diff --git a/target/linux/ixp4xx/config-4.9 b/target/linux/ixp4xx/config-4.9
deleted file mode 100644
index 5623f907a6..0000000000
--- a/target/linux/ixp4xx/config-4.9
+++ /dev/null
@@ -1,245 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ARCH_ADI_COYOTE is not set
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_IXCDP1100=y
-CONFIG_ARCH_IXDP425=y
-CONFIG_ARCH_IXDP4XX=y
-CONFIG_ARCH_IXP4XX=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_ARCH_PRPMC1100 is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ATAGS=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_ENDIAN_BE32=y
-# CONFIG_CPU_ENDIAN_BE8 is not set
-CONFIG_CPU_IXP43X=y
-CONFIG_CPU_IXP46X=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xc8000003
-CONFIG_DEBUG_UART_VIRT=0xfef00003
-# CONFIG_DEBUG_USER is not set
-CONFIG_DMABOUNCE=y
-CONFIG_DNOTIFY=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_IXP4XX=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_IWMMXT is not set
-CONFIG_IXP4XX_ETH=y
-# CONFIG_IXP4XX_INDIRECT_PCI is not set
-CONFIG_IXP4XX_NPE=y
-CONFIG_IXP4XX_QMGR=y
-CONFIG_IXP4XX_WATCHDOG=y
-CONFIG_LEDS_FSG=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_LATCH=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_AP1000=y
-CONFIG_MACH_AP42X=y
-# CONFIG_MACH_ARCOM_VULCAN is not set
-CONFIG_MACH_AVILA=y
-CONFIG_MACH_CAMBRIA=y
-CONFIG_MACH_COMPEXWP18=y
-# CONFIG_MACH_DEVIXP is not set
-CONFIG_MACH_DSMG600=y
-CONFIG_MACH_FSG=y
-CONFIG_MACH_GATEWAY7001=y
-# CONFIG_MACH_GORAMO_MLR is not set
-# CONFIG_MACH_GTWX5715 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_MACH_IXDPG425=y
-# CONFIG_MACH_KIXRP435 is not set
-CONFIG_MACH_LOFT=y
-CONFIG_MACH_MI424WR=y
-# CONFIG_MACH_MIC256 is not set
-# CONFIG_MACH_MICCPT is not set
-CONFIG_MACH_NAS100D=y
-CONFIG_MACH_NSLU2=y
-CONFIG_MACH_PRONGHORN=y
-CONFIG_MACH_PRONGHORNMETRO=y
-CONFIG_MACH_SIDEWINDER=y
-CONFIG_MACH_TW2662=y
-CONFIG_MACH_TW5334=y
-CONFIG_MACH_USR8200=y
-CONFIG_MACH_WG302V1=y
-CONFIG_MACH_WG302V2=y
-CONFIG_MACH_WRT300NV2=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_IXP4XX=y
-CONFIG_MTD_OTP=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_MACH_IO_H=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_VENDOR_XSCALE=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NVMEM=y
-# CONFIG_OF is not set
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-# CONFIG_PCI_DOMAINS_GENERIC is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1672=y
-CONFIG_RTC_DRV_ISL1208=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_RTC_DRV_X1205=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SENSORS_AD7418=y
-CONFIG_SENSORS_MAX6650=y
-CONFIG_SENSORS_W83781D=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
-CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
diff --git a/target/linux/ixp4xx/generic/profiles/100-Default.mk b/target/linux/ixp4xx/generic/profiles/100-Default.mk
deleted file mode 100644
index c881c8001d..0000000000
--- a/target/linux/ixp4xx/generic/profiles/100-Default.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Default
- NAME:=Default Profile
- PACKAGES:=kmod-ath5k
-endef
-
-define Profile/Default/Description
- Default IXP4xx Profile
-endef
-$(eval $(call Profile,Default))
-
diff --git a/target/linux/ixp4xx/generic/profiles/105-Atheros-ath5k.mk b/target/linux/ixp4xx/generic/profiles/105-Atheros-ath5k.mk
deleted file mode 100644
index 8f74277c3b..0000000000
--- a/target/linux/ixp4xx/generic/profiles/105-Atheros-ath5k.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Copyright (C) 2006-2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Atheros-ath5k
- NAME:=Atheros WiFi (atk5k)
- PACKAGES:=kmod-ath5k
-endef
-
-define Profile/Atheros-ath5k/Description
- Package set compatible with hardware using Atheros WiFi cards
-endef
-$(eval $(call Profile,Atheros-ath5k))
-
diff --git a/target/linux/ixp4xx/generic/profiles/200-NSLU2.mk b/target/linux/ixp4xx/generic/profiles/200-NSLU2.mk
deleted file mode 100644
index 55073602a0..0000000000
--- a/target/linux/ixp4xx/generic/profiles/200-NSLU2.mk
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Copyright (C) 2006-2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/NSLU2
- NAME:=Linksys NSLU2
- PACKAGES:=-wpad-basic -kmod-ath5k kmod-scsi-core \
- kmod-usb-ohci-pci kmod-usb2-pci kmod-usb-storage \
- kmod-fs-ext4
-endef
-
-define Profile/NSLU2/Description
- Package set optimized for the Linksys NSLU2
-endef
-$(eval $(call Profile,NSLU2))
-
diff --git a/target/linux/ixp4xx/generic/profiles/300-NAS100d.mk b/target/linux/ixp4xx/generic/profiles/300-NAS100d.mk
deleted file mode 100644
index a50eec09e0..0000000000
--- a/target/linux/ixp4xx/generic/profiles/300-NAS100d.mk
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/NAS100d
- NAME:=Iomega NAS 100d
- PACKAGES:=kmod-ath5k \
- kmod-scsi-core \
- kmod-ata-core kmod-ata-artop \
- kmod-usb2-pci kmod-usb-storage \
- kmod-fs-ext4
-endef
-
-define Profile/NAS100d/Description
- Package set optimized for the Iomega NAS 100d
-endef
-$(eval $(call Profile,NAS100d))
-
diff --git a/target/linux/ixp4xx/generic/profiles/400-DSMG600RevA.mk b/target/linux/ixp4xx/generic/profiles/400-DSMG600RevA.mk
deleted file mode 100644
index fe2b1ccc64..0000000000
--- a/target/linux/ixp4xx/generic/profiles/400-DSMG600RevA.mk
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/DSMG600RevA
- NAME:=DSM-G600 Rev A
- PACKAGES:=kmod-via-velocity \
- kmod-ath5k \
- kmod-scsi-core \
- kmod-ata-core kmod-ata-artop \
- kmod-usb-uhci kmod-usb2-pci kmod-usb-storage \
- kmod-fs-ext4
-endef
-
-define Profile/DSMG600RevA/Description
- Package set optimized for the DSM-G600 Rev A
-endef
-$(eval $(call Profile,DSMG600RevA))
-
diff --git a/target/linux/ixp4xx/generic/profiles/500-USR8200.mk b/target/linux/ixp4xx/generic/profiles/500-USR8200.mk
deleted file mode 100644
index a4c1f7f430..0000000000
--- a/target/linux/ixp4xx/generic/profiles/500-USR8200.mk
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Copyright (C) 2006-2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/USR8200
- NAME:=USRobotics USR8200
- PACKAGES:=-wpad-basic kmod-scsi-core \
- kmod-usb-uhci kmod-usb2-pci kmod-usb-storage \
- kmod-fs-ext4 kmod-firewire kmod-firewire-ohci kmod-firewire-sbp2
-endef
-
-define Profile/USR8200/Description
- Package set optimized for the USRobotics USR8200
-endef
-$(eval $(call Profile,USR8200))
-
diff --git a/target/linux/ixp4xx/generic/target.mk b/target/linux/ixp4xx/generic/target.mk
deleted file mode 100644
index 4794755fdc..0000000000
--- a/target/linux/ixp4xx/generic/target.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-BOARDNAME:=Generic
-
-DEFAULT_PACKAGES+= wpad-basic
-
-define Target/Description
- Build firmware images for ixp4xx based boards that boot from internal flash
- (e.g : Linksys NSLU2, ...)
-endef
-
diff --git a/target/linux/ixp4xx/harddisk/config-default b/target/linux/ixp4xx/harddisk/config-default
deleted file mode 100644
index 78e599ca86..0000000000
--- a/target/linux/ixp4xx/harddisk/config-default
+++ /dev/null
@@ -1,20 +0,0 @@
-CONFIG_ATA=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CMDLINE="root=/dev/sda1 noinitrd console=ttyS0,115200"
-CONFIG_EXT4_FS=y
-CONFIG_JBD=y
-CONFIG_REISERFS_FS=y
-CONFIG_SATA_VIA=y
-CONFIG_USB=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_STORAGE=y
diff --git a/target/linux/ixp4xx/harddisk/profiles/100-FSG3.mk b/target/linux/ixp4xx/harddisk/profiles/100-FSG3.mk
deleted file mode 100644
index 489ef083a8..0000000000
--- a/target/linux/ixp4xx/harddisk/profiles/100-FSG3.mk
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/FSG3
- NAME:=Freecom FSG-3
- PACKAGES:= \
- kmod-ath5k \
- kmod-usb-uhci kmod-usb2-pci kmod-usb-storage \
- kmod-fs-ext4 kmod-fs-reiserfs
-endef
-
-define Profile/FSG3/Description
- Package set optimized for the Freecom FSG-3
-endef
-$(eval $(call Profile,FSG3))
-
diff --git a/target/linux/ixp4xx/harddisk/target.mk b/target/linux/ixp4xx/harddisk/target.mk
deleted file mode 100644
index c71065e5f1..0000000000
--- a/target/linux/ixp4xx/harddisk/target.mk
+++ /dev/null
@@ -1,6 +0,0 @@
-BOARDNAME:=Internal Hard-Disk
-
-define Target/Description
- Build firmware images for ixp4xx based boards that boot directly from internal disk storage
- (e.g : Freecom FSG-3, ...)
-endef
diff --git a/target/linux/ixp4xx/image/Makefile b/target/linux/ixp4xx/image/Makefile
deleted file mode 100644
index 5b6ff0b08e..0000000000
--- a/target/linux/ixp4xx/image/Makefile
+++ /dev/null
@@ -1,76 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-ifdef CONFIG_PACKAGE_apex
- define Image/Build/Linksys
- BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \
- -L $(STAGING_DIR_IMAGE)/apex-$(2)-armeb.bin \
- -k $(BIN_DIR)/$(IMG_PREFIX)-$(2)-zImage \
- -r rootfs:$(BIN_DIR)/$(IMG_PREFIX)-$(1).img \
- -p -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).bin
- BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/slugimage.pl \
- -F -L $(STAGING_DIR_IMAGE)/apex-$(2)-16mb-armeb.bin \
- -k $(BIN_DIR)/$(IMG_PREFIX)-$(2)-zImage \
- -r rootfs:$(BIN_DIR)/$(IMG_PREFIX)-$(1).img \
- -p -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-16mb.bin
- endef
-endif
-
-define Image/Build/Freecom
- $(INSTALL_DIR) $(TARGET_DIR)/boot
- # TODO: Add special CMDLINE shim for webupgrade image here
- $(CP) $(BIN_DIR)/$(IMG_PREFIX)-$(2)-zImage $(TARGET_DIR)/zImage
- $(TAR) cfj $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).img --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
- $(STAGING_DIR_HOST)/bin/encode_crc $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).img $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-webupgrade.img
- rm -f $(TARGET_DIR)/zImage
-endef
-
-define Image/BuildKernel
- cp $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
- BIN_DIR=$(BIN_DIR) IMG_PREFIX="$(IMG_PREFIX)" $(TOPDIR)/scripts/arm-magic.sh
-endef
-
-define Image/BuildKernel/Initramfs
- cp $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-initramfs-zImage
- BIN_DIR=$(BIN_DIR) IMG_PREFIX="$(IMG_PREFIX)-initramfs" $(TOPDIR)/scripts/arm-magic.sh
-endef
-
-# Build sysupgrade image
-define BuildFirmware/Generic
- dd if=$(KDIR)/zImage of=$(KDIR)/zImage.pad bs=64k conv=sync; \
- dd if=$(KDIR)/root.$(1) of=$(KDIR)/root.$(1).pad bs=128k conv=sync; \
- sh $(TOPDIR)/scripts/combined-image.sh \
- $(KDIR)/zImage.pad \
- $(KDIR)/root.$(1).pad \
- $(BIN_DIR)/$(IMG_PREFIX)-$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))-sysupgrade.bin
-endef
-
-define Image/Build
- $(call Image/Build/$(1),$(1))
- $(call BuildFirmware/Generic,$(1))
-endef
-
-define Image/Build/jffs2-64k
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=65536 conv=sync
-endef
-
-define Image/Build/jffs2-128k
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=131072 conv=sync
- $(call Image/Build/Linksys,$(1),nslu2,$(1))
- $(call Image/Build/Freecom,$(1),fsg3,$(1))
-endef
-
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(1).img bs=131072 conv=sync
- $(call Image/Build/Linksys,$(1),nslu2,$(1))
- $(call Image/Build/Freecom,$(1),fsg3,$(1))
-endef
-
-$(eval $(call BuildImage))
diff --git a/target/linux/ixp4xx/modules.mk b/target/linux/ixp4xx/modules.mk
deleted file mode 100644
index 2d6446c05b..0000000000
--- a/target/linux/ixp4xx/modules.mk
+++ /dev/null
@@ -1,74 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define KernelPackage/ata-ixp4xx-cf
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=IXP4XX Compact Flash support
- DEPENDS:=@TARGET_ixp4xx
- KCONFIG:=CONFIG_PATA_IXP4XX_CF
- FILES:=$(LINUX_DIR)/drivers/ata/pata_ixp4xx_cf.ko
- AUTOLOAD:=$(call AutoLoad,41,pata_ixp4xx_cf,1)
- $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-ixp4xx-cf/description
- IXP4XX Compact Flash support.
-endef
-
-$(eval $(call KernelPackage,ata-ixp4xx-cf))
-
-
-define KernelPackage/ixp4xx-beeper
- SUBMENU:=$(OTHER_MENU)
- TITLE:=IXP4XX Beeper support
- DEPENDS:=@TARGET_ixp4xx +kmod-input-core
- KCONFIG:= \
- CONFIG_INPUT_MISC=y \
- CONFIG_INPUT_IXP4XX_BEEPER
- FILES:=$(LINUX_DIR)/drivers/input/misc/ixp4xx-beeper.ko
- AUTOLOAD:=$(call AutoLoad,50,ixp4xx-beeper)
- $(call AddDepends/input)
-endef
-
-define KernelPackage/ixp4xx-beeper/description
- IXP4XX Beeper support
-endef
-
-$(eval $(call KernelPackage,ixp4xx-beeper))
-
-
-define KernelPackage/crypto-hw-ixp4xx
- TITLE:=Intel IXP4xx hardware crypto module
- DEPENDS:=@TARGET_ixp4xx
- KCONFIG:= \
- CONFIG_CRYPTO_DEV_IXP4XX
- FILES:=$(LINUX_DIR)/drivers/crypto/ixp4xx_crypto.ko
- AUTOLOAD:=$(call AutoLoad,90,ixp4xx_crypto)
- $(call AddDepends/crypto,+kmod-crypto-authenc +kmod-crypto-des)
-endef
-
-define KernelPackage/crypto-hw-ixp4xx/description
- Kernel support for the Intel IXP4xx HW crypto engine.
-endef
-
-$(eval $(call KernelPackage,crypto-hw-ixp4xx))
-
-
-define KernelPackage/ixp4xx-eth
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=IXP4xxt Ethernet Adapter kernel support
- DEPENDS:=@TARGET_ixp4xx
- KCONFIG:=CONFIG_IXP4XX_ETH
- FILES:=$(LINUX_DIR)/drivers/net/ethernet/xscale/ixp4xx_eth.ko
- AUTOLOAD:=$(call AutoLoad,50,ixp4xx_eth)
-endef
-
-define KernelPackage/ixp4xx-eth/description
- Kernel modules for Intel IXP4xx Ethernet chipsets.
-endef
-
-$(eval $(call KernelPackage,ixp4xx-eth))
diff --git a/target/linux/ixp4xx/patches-4.9/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch b/target/linux/ixp4xx/patches-4.9/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch
deleted file mode 100644
index 3ca3eb76a6..0000000000
--- a/target/linux/ixp4xx/patches-4.9/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From 7113f56b683c5123df5c20724ac813cee66fa21a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo at openwrt.org>
-Date: Mon, 1 Jul 2013 16:49:05 +0200
-Subject: [PATCH 1/2] arm: ixp4xx: set cohorent_dma_mask for ethernet platform
- devices
-
-ARM requires the cohorent_dma_mask set, so set it for the platform
-devices so that the ethernet driver has access to it.
-
-Signed-off-by: Jonas Gorski <jogo at openwrt.org>
----
- arch/arm/mach-ixp4xx/fsg-setup.c | 2 ++
- arch/arm/mach-ixp4xx/goramo_mlr.c | 2 ++
- arch/arm/mach-ixp4xx/ixdp425-setup.c | 3 +++
- arch/arm/mach-ixp4xx/nas100d-setup.c | 1 +
- arch/arm/mach-ixp4xx/nslu2-setup.c | 1 +
- arch/arm/mach-ixp4xx/omixp-setup.c | 3 +++
- arch/arm/mach-ixp4xx/vulcan-setup.c | 2 ++
- 7 files changed, 14 insertions(+)
-
---- a/arch/arm/mach-ixp4xx/fsg-setup.c
-+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
-@@ -142,12 +142,14 @@ static struct platform_device fsg_eth[]
- .id = IXP4XX_ETH_NPEB,
- .dev = {
- .platform_data = fsg_plat_eth,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- }, {
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEC,
- .dev = {
- .platform_data = fsg_plat_eth + 1,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- }
- };
---- a/arch/arm/mach-ixp4xx/goramo_mlr.c
-+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
-@@ -295,10 +295,12 @@ static struct platform_device device_eth
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEB,
- .dev.platform_data = eth_plat,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }, {
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEC,
- .dev.platform_data = eth_plat + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }
- };
-
---- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
-@@ -20,6 +20,7 @@
- #include <linux/mtd/nand.h>
- #include <linux/mtd/partitions.h>
- #include <linux/delay.h>
-+#include <linux/dma-mapping.h>
- #include <linux/gpio.h>
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -196,10 +197,12 @@ static struct platform_device ixdp425_et
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEB,
- .dev.platform_data = ixdp425_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }, {
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEC,
- .dev.platform_data = ixdp425_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }
- };
-
---- a/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -170,6 +170,7 @@ static struct platform_device nas100d_et
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEB,
- .dev.platform_data = nas100d_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }
- };
-
---- a/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -182,6 +182,7 @@ static struct platform_device nslu2_eth[
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEB,
- .dev.platform_data = nslu2_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }
- };
-
---- a/arch/arm/mach-ixp4xx/omixp-setup.c
-+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
-@@ -17,6 +17,7 @@
- #include <linux/serial_8250.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/dma-mapping.h>
- #include <linux/leds.h>
-
- #include <asm/setup.h>
-@@ -188,10 +189,12 @@ static struct platform_device ixdp425_et
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEB,
- .dev.platform_data = ixdp425_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }, {
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEC,
- .dev.platform_data = ixdp425_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- },
- };
-
---- a/arch/arm/mach-ixp4xx/vulcan-setup.c
-+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
-@@ -139,6 +139,7 @@ static struct platform_device vulcan_eth
- .id = IXP4XX_ETH_NPEB,
- .dev = {
- .platform_data = &vulcan_plat_eth[0],
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- },
- [1] = {
-@@ -146,6 +147,7 @@ static struct platform_device vulcan_eth
- .id = IXP4XX_ETH_NPEC,
- .dev = {
- .platform_data = &vulcan_plat_eth[1],
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- },
- };
diff --git a/target/linux/ixp4xx/patches-4.9/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch b/target/linux/ixp4xx/patches-4.9/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch
deleted file mode 100644
index b369b56f00..0000000000
--- a/target/linux/ixp4xx/patches-4.9/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 1d67040af0144c549f4db8144d2ccc253ff8639c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo at openwrt.org>
-Date: Mon, 1 Jul 2013 16:39:28 +0200
-Subject: [PATCH 2/2] net: ixp4xx_eth: use parent device for dma allocations
-
-Now that the platfomr device provides a dma_cohorent_mask, use it for
-dma operations.
-
-This fixes ethernet on ixp4xx which was broken since 3.7.
-
-Signed-off-by: Jonas Gorski <jogo at openwrt.org>
----
- drivers/net/ethernet/xscale/ixp4xx_eth.c | 23 ++++++++++++-----------
- 1 file changed, 12 insertions(+), 11 deletions(-)
-
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -656,10 +656,10 @@ static inline void queue_put_desc(unsign
- static inline void dma_unmap_tx(struct port *port, struct desc *desc)
- {
- #ifdef __ARMEB__
-- dma_unmap_single(&port->netdev->dev, desc->data,
-+ dma_unmap_single(port->netdev->dev.parent, desc->data,
- desc->buf_len, DMA_TO_DEVICE);
- #else
-- dma_unmap_single(&port->netdev->dev, desc->data & ~3,
-+ dma_unmap_single(port->netdev->dev.parent, desc->data & ~3,
- ALIGN((desc->data & 3) + desc->buf_len, 4),
- DMA_TO_DEVICE);
- #endif
-@@ -725,9 +725,9 @@ static int eth_poll(struct napi_struct *
-
- #ifdef __ARMEB__
- if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) {
-- phys = dma_map_single(&dev->dev, skb->data,
-+ phys = dma_map_single(dev->dev.parent, skb->data,
- RX_BUFF_SIZE, DMA_FROM_DEVICE);
-- if (dma_mapping_error(&dev->dev, phys)) {
-+ if (dma_mapping_error(dev->dev.parent, phys)) {
- dev_kfree_skb(skb);
- skb = NULL;
- }
-@@ -750,10 +750,11 @@ static int eth_poll(struct napi_struct *
- #ifdef __ARMEB__
- temp = skb;
- skb = port->rx_buff_tab[n];
-- dma_unmap_single(&dev->dev, desc->data - NET_IP_ALIGN,
-+ dma_unmap_single(dev->dev.parent, desc->data - NET_IP_ALIGN,
- RX_BUFF_SIZE, DMA_FROM_DEVICE);
- #else
-- dma_sync_single_for_cpu(&dev->dev, desc->data - NET_IP_ALIGN,
-+ dma_sync_single_for_cpu(dev->dev.parent,
-+ desc->data - NET_IP_ALIGN,
- RX_BUFF_SIZE, DMA_FROM_DEVICE);
- memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
- ALIGN(NET_IP_ALIGN + desc->pkt_len, 4) / 4);
-@@ -872,7 +873,7 @@ static int eth_xmit(struct sk_buff *skb,
- memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
- #endif
-
-- phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
-+ phys = dma_map_single(dev->dev.parent, mem, bytes, DMA_TO_DEVICE);
- if (dma_mapping_error(&dev->dev, phys)) {
- dev_kfree_skb(skb);
- #ifndef __ARMEB__
-@@ -1107,7 +1108,7 @@ static int init_queues(struct port *port
- int i;
-
- if (!ports_open) {
-- dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
-+ dma_pool = dma_pool_create(DRV_NAME, port->netdev->dev.parent,
- POOL_ALLOC_SIZE, 32, 0);
- if (!dma_pool)
- return -ENOMEM;
-@@ -1135,9 +1136,9 @@ static int init_queues(struct port *port
- data = buff;
- #endif
- desc->buf_len = MAX_MRU;
-- desc->data = dma_map_single(&port->netdev->dev, data,
-+ desc->data = dma_map_single(port->netdev->dev.parent, data,
- RX_BUFF_SIZE, DMA_FROM_DEVICE);
-- if (dma_mapping_error(&port->netdev->dev, desc->data)) {
-+ if (dma_mapping_error(port->netdev->dev.parent, desc->data)) {
- free_buffer(buff);
- return -EIO;
- }
-@@ -1157,7 +1158,7 @@ static void destroy_queues(struct port *
- struct desc *desc = rx_desc_ptr(port, i);
- buffer_t *buff = port->rx_buff_tab[i];
- if (buff) {
-- dma_unmap_single(&port->netdev->dev,
-+ dma_unmap_single(port->netdev->dev.parent,
- desc->data - NET_IP_ALIGN,
- RX_BUFF_SIZE, DMA_FROM_DEVICE);
- free_buffer(buff);
diff --git a/target/linux/ixp4xx/patches-4.9/020-gateworks_i2c_pld.patch b/target/linux/ixp4xx/patches-4.9/020-gateworks_i2c_pld.patch
deleted file mode 100644
index 185a09fff2..0000000000
--- a/target/linux/ixp4xx/patches-4.9/020-gateworks_i2c_pld.patch
+++ /dev/null
@@ -1,424 +0,0 @@
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -656,6 +656,14 @@ config GPIO_WS16C48
- parameter. The interrupt line numbers for the devices may be
- configured via the irq module parameter.
-
-+config GPIO_GW_I2C_PLD
-+ tristate "Gateworks I2C PLD GPIO Expander"
-+ depends on I2C
-+ help
-+ Say yes here to provide access to the Gateworks I2C PLD GPIO
-+ Expander. This is used at least on the GW2358-4.
-+
-+
- endmenu
-
- menu "I2C GPIO expanders"
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -48,6 +48,7 @@ obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x
- obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
- obj-$(CONFIG_GPIO_GPIO_MM) += gpio-gpio-mm.o
- obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
-+obj-$(CONFIG_GPIO_GW_I2C_PLD) += gw_i2c_pld.o
- obj-$(CONFIG_HTC_EGPIO) += gpio-htc-egpio.o
- obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
- obj-$(CONFIG_GPIO_IOP) += gpio-iop.o
---- /dev/null
-+++ b/drivers/gpio/gw_i2c_pld.c
-@@ -0,0 +1,371 @@
-+/*
-+ * Gateworks I2C PLD GPIO expander
-+ *
-+ * Copyright (C) 2009 Gateworks Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/hardirq.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c/gw_i2c_pld.h>
-+#include <linux/module.h>
-+#include <linux/export.h>
-+#include <asm/gpio.h>
-+#include <mach/hardware.h>
-+
-+static const struct i2c_device_id gw_i2c_pld_id[] = {
-+ { "gw_i2c_pld", 8 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, gw_i2c_pld_id);
-+
-+/*
-+ * The Gateworks I2C PLD chip only expose one read and one
-+ * write register. Writing a "one" bit (to match the reset state) lets
-+ * that pin be used as an input. It is an open-drain model.
-+ */
-+
-+struct gw_i2c_pld {
-+ struct gpio_chip chip;
-+ struct i2c_client *client;
-+ unsigned out; /* software latch */
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * The Gateworks I2C PLD chip does not properly send the acknowledge bit
-+ * thus we cannot use standard i2c_smbus functions. We have recreated
-+ * our own here, but we still use the rt_mutex_lock to lock the i2c_bus
-+ * as the device still exists on the I2C bus.
-+*/
-+
-+#define PLD_SCL_GPIO 6
-+#define PLD_SDA_GPIO 7
-+
-+#define SCL_LO() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_LOW)
-+#define SCL_HI() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_HIGH)
-+#define SCL_EN() gpio_line_config(PLD_SCL_GPIO, IXP4XX_GPIO_OUT)
-+#define SDA_LO() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_LOW)
-+#define SDA_HI() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_HIGH)
-+#define SDA_EN() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_OUT)
-+#define SDA_DIS() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_IN)
-+#define SDA_IN(x) gpio_line_get(PLD_SDA_GPIO, &x);
-+
-+static int i2c_pld_write_byte(int address, int byte)
-+{
-+ int i;
-+
-+ address = (address << 1) & ~0x1;
-+
-+ SDA_HI();
-+ SDA_EN();
-+ SCL_EN();
-+ SCL_HI();
-+ SDA_LO();
-+ SCL_LO();
-+
-+ for (i = 7; i >= 0; i--)
-+ {
-+ if (address & (1 << i))
-+ SDA_HI();
-+ else
-+ SDA_LO();
-+
-+ SCL_HI();
-+ SCL_LO();
-+ }
-+
-+ SDA_DIS();
-+ SCL_HI();
-+ SDA_IN(i);
-+ SCL_LO();
-+ SDA_EN();
-+
-+ for (i = 7; i >= 0; i--)
-+ {
-+ if (byte & (1 << i))
-+ SDA_HI();
-+ else
-+ SDA_LO();
-+ SCL_HI();
-+ SCL_LO();
-+ }
-+
-+ SDA_DIS();
-+ SCL_HI();
-+ SDA_IN(i);
-+ SCL_LO();
-+
-+ SDA_HI();
-+ SDA_EN();
-+
-+ SDA_LO();
-+ SCL_HI();
-+ SDA_HI();
-+ SCL_LO();
-+ SCL_HI();
-+
-+ return 0;
-+}
-+
-+static unsigned int i2c_pld_read_byte(int address)
-+{
-+ int i = 0, byte = 0;
-+ int bit;
-+
-+ address = (address << 1) | 0x1;
-+
-+ SDA_HI();
-+ SDA_EN();
-+ SCL_EN();
-+ SCL_HI();
-+ SDA_LO();
-+ SCL_LO();
-+
-+ for (i = 7; i >= 0; i--)
-+ {
-+ if (address & (1 << i))
-+ SDA_HI();
-+ else
-+ SDA_LO();
-+
-+ SCL_HI();
-+ SCL_LO();
-+ }
-+
-+ SDA_DIS();
-+ SCL_HI();
-+ SDA_IN(i);
-+ SCL_LO();
-+ SDA_EN();
-+
-+ SDA_DIS();
-+ for (i = 7; i >= 0; i--)
-+ {
-+ SCL_HI();
-+ SDA_IN(bit);
-+ byte |= bit << i;
-+ SCL_LO();
-+ }
-+
-+ SDA_LO();
-+ SCL_HI();
-+ SDA_HI();
-+ SCL_LO();
-+ SCL_HI();
-+
-+ return byte;
-+}
-+
-+
-+static int gw_i2c_pld_input8(struct gpio_chip *chip, unsigned offset)
-+{
-+ int ret;
-+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+ struct i2c_adapter *adap = gpio->client->adapter;
-+
-+ if (in_atomic() || irqs_disabled()) {
-+ ret = rt_mutex_trylock(&adap->bus_lock);
-+ if (!ret)
-+ /* I2C activity is ongoing. */
-+ return -EAGAIN;
-+ } else {
-+ rt_mutex_lock(&adap->bus_lock);
-+ }
-+
-+ gpio->out |= (1 << offset);
-+
-+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
-+
-+ rt_mutex_unlock(&adap->bus_lock);
-+
-+ return ret;
-+}
-+
-+static int gw_i2c_pld_get8(struct gpio_chip *chip, unsigned offset)
-+{
-+ int ret;
-+ s32 value;
-+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+ struct i2c_adapter *adap = gpio->client->adapter;
-+
-+ if (in_atomic() || irqs_disabled()) {
-+ ret = rt_mutex_trylock(&adap->bus_lock);
-+ if (!ret)
-+ /* I2C activity is ongoing. */
-+ return -EAGAIN;
-+ } else {
-+ rt_mutex_lock(&adap->bus_lock);
-+ }
-+
-+ value = i2c_pld_read_byte(gpio->client->addr);
-+
-+ rt_mutex_unlock(&adap->bus_lock);
-+
-+ return (value < 0) ? 0 : (value & (1 << offset));
-+}
-+
-+static int gw_i2c_pld_output8(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ int ret;
-+
-+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+ struct i2c_adapter *adap = gpio->client->adapter;
-+
-+ unsigned bit = 1 << offset;
-+
-+ if (in_atomic() || irqs_disabled()) {
-+ ret = rt_mutex_trylock(&adap->bus_lock);
-+ if (!ret)
-+ /* I2C activity is ongoing. */
-+ return -EAGAIN;
-+ } else {
-+ rt_mutex_lock(&adap->bus_lock);
-+ }
-+
-+
-+ if (value)
-+ gpio->out |= bit;
-+ else
-+ gpio->out &= ~bit;
-+
-+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
-+
-+ rt_mutex_unlock(&adap->bus_lock);
-+
-+ return ret;
-+}
-+
-+static void gw_i2c_pld_set8(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ gw_i2c_pld_output8(chip, offset, value);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int gw_i2c_pld_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct gw_i2c_pld_platform_data *pdata;
-+ struct gw_i2c_pld *gpio;
-+ int status;
-+
-+ pdata = client->dev.platform_data;
-+ if (!pdata)
-+ return -ENODEV;
-+
-+ /* Allocate, initialize, and register this gpio_chip. */
-+ gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
-+ if (!gpio)
-+ return -ENOMEM;
-+
-+ gpio->chip.base = pdata->gpio_base;
-+ gpio->chip.can_sleep = 1;
-+ gpio->chip.dev = &client->dev;
-+ gpio->chip.owner = THIS_MODULE;
-+
-+ gpio->chip.ngpio = pdata->nr_gpio;
-+ gpio->chip.direction_input = gw_i2c_pld_input8;
-+ gpio->chip.get = gw_i2c_pld_get8;
-+ gpio->chip.direction_output = gw_i2c_pld_output8;
-+ gpio->chip.set = gw_i2c_pld_set8;
-+
-+ gpio->chip.label = client->name;
-+
-+ gpio->client = client;
-+ i2c_set_clientdata(client, gpio);
-+
-+ gpio->out = 0xFF;
-+
-+ status = gpiochip_add(&gpio->chip);
-+ if (status < 0)
-+ goto fail;
-+
-+ dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
-+ gpio->chip.base,
-+ gpio->chip.base + gpio->chip.ngpio - 1,
-+ client->name,
-+ client->irq ? " (irq ignored)" : "");
-+
-+ /* Let platform code set up the GPIOs and their users.
-+ * Now is the first time anyone could use them.
-+ */
-+ if (pdata->setup) {
-+ status = pdata->setup(client,
-+ gpio->chip.base, gpio->chip.ngpio,
-+ pdata->context);
-+ if (status < 0)
-+ dev_warn(&client->dev, "setup --> %d\n", status);
-+ }
-+
-+ return 0;
-+
-+fail:
-+ dev_dbg(&client->dev, "probe error %d for '%s'\n",
-+ status, client->name);
-+ kfree(gpio);
-+ return status;
-+}
-+
-+static int gw_i2c_pld_remove(struct i2c_client *client)
-+{
-+ struct gw_i2c_pld_platform_data *pdata = client->dev.platform_data;
-+ struct gw_i2c_pld *gpio = i2c_get_clientdata(client);
-+ int status = 0;
-+
-+ if (pdata->teardown) {
-+ status = pdata->teardown(client,
-+ gpio->chip.base, gpio->chip.ngpio,
-+ pdata->context);
-+ if (status < 0) {
-+ dev_err(&client->dev, "%s --> %d\n",
-+ "teardown", status);
-+ return status;
-+ }
-+ }
-+
-+ gpiochip_remove(&gpio->chip);
-+ kfree(gpio);
-+ return 0;
-+}
-+
-+static struct i2c_driver gw_i2c_pld_driver = {
-+ .driver = {
-+ .name = "gw_i2c_pld",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = gw_i2c_pld_probe,
-+ .remove = gw_i2c_pld_remove,
-+ .id_table = gw_i2c_pld_id,
-+};
-+
-+static int __init gw_i2c_pld_init(void)
-+{
-+ return i2c_add_driver(&gw_i2c_pld_driver);
-+}
-+module_init(gw_i2c_pld_init);
-+
-+static void __exit gw_i2c_pld_exit(void)
-+{
-+ i2c_del_driver(&gw_i2c_pld_driver);
-+}
-+module_exit(gw_i2c_pld_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chris Lang");
---- /dev/null
-+++ b/include/linux/i2c/gw_i2c_pld.h
-@@ -0,0 +1,20 @@
-+#ifndef __LINUX_GW_I2C_PLD_H
-+#define __LINUX_GW_I2C_PLD_H
-+
-+/**
-+ * The Gateworks I2C PLD Implements an additional 8 bits of GPIO through the PLD
-+ */
-+
-+struct gw_i2c_pld_platform_data {
-+ unsigned gpio_base;
-+ unsigned nr_gpio;
-+ int (*setup)(struct i2c_client *client,
-+ int gpio, unsigned ngpio,
-+ void *context);
-+ int (*teardown)(struct i2c_client *client,
-+ int gpio, unsigned ngpio,
-+ void *context);
-+ void *context;
-+};
-+
-+#endif /* __LINUX_GW_I2C_PLD_H */
diff --git a/target/linux/ixp4xx/patches-4.9/030-gpio_line_config.patch b/target/linux/ixp4xx/patches-4.9/030-gpio_line_config.patch
deleted file mode 100644
index 0e51793273..0000000000
--- a/target/linux/ixp4xx/patches-4.9/030-gpio_line_config.patch
+++ /dev/null
@@ -1,73 +0,0 @@
---- a/arch/arm/mach-ixp4xx/common.c
-+++ b/arch/arm/mach-ixp4xx/common.c
-@@ -93,22 +93,7 @@ void __init ixp4xx_map_io(void)
- /*
- * GPIO-functions
- */
--/*
-- * The following converted to the real HW bits the gpio_line_config
-- */
--/* GPIO pin types */
--#define IXP4XX_GPIO_OUT 0x1
--#define IXP4XX_GPIO_IN 0x2
--
--/* GPIO signal types */
--#define IXP4XX_GPIO_LOW 0
--#define IXP4XX_GPIO_HIGH 1
--
--/* GPIO Clocks */
--#define IXP4XX_GPIO_CLK_0 14
--#define IXP4XX_GPIO_CLK_1 15
--
--static void gpio_line_config(u8 line, u32 direction)
-+void gpio_line_config(u8 line, u32 direction)
- {
- if (direction == IXP4XX_GPIO_IN)
- *IXP4XX_GPIO_GPOER |= (1 << line);
-@@ -116,17 +101,17 @@ static void gpio_line_config(u8 line, u3
- *IXP4XX_GPIO_GPOER &= ~(1 << line);
- }
-
--static void gpio_line_get(u8 line, int *value)
-+void gpio_line_get(u8 line, int *value)
- {
- *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
- }
-
--static void gpio_line_set(u8 line, int value)
-+void gpio_line_set(u8 line, int value)
- {
-- if (value == IXP4XX_GPIO_HIGH)
-- *IXP4XX_GPIO_GPOUTR |= (1 << line);
-- else if (value == IXP4XX_GPIO_LOW)
-+ if (value == IXP4XX_GPIO_LOW)
- *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-+ else
-+ *IXP4XX_GPIO_GPOUTR |= (1 << line);
- }
-
- /*************************************************************************
---- a/arch/arm/mach-ixp4xx/include/mach/platform.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
-@@ -131,5 +131,21 @@ struct pci_sys_data;
- extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
- extern struct pci_ops ixp4xx_ops;
-
-+/* GPIO pin types */
-+#define IXP4XX_GPIO_OUT 0x1
-+#define IXP4XX_GPIO_IN 0x2
-+
-+/* GPIO signal types */
-+#define IXP4XX_GPIO_LOW 0
-+#define IXP4XX_GPIO_HIGH 1
-+
-+/* GPIO Clocks */
-+#define IXP4XX_GPIO_CLK_0 14
-+#define IXP4XX_GPIO_CLK_1 15
-+
-+void gpio_line_config(u8 line, u32 direction);
-+void gpio_line_get(u8 line, int *value);
-+void gpio_line_set(u8 line, int value);
-+
- #endif // __ASSEMBLY__
-
diff --git a/target/linux/ixp4xx/patches-4.9/040-arm_mach_types.patch b/target/linux/ixp4xx/patches-4.9/040-arm_mach_types.patch
deleted file mode 100644
index c6392ef2f8..0000000000
--- a/target/linux/ixp4xx/patches-4.9/040-arm_mach_types.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -1006,3 +1006,15 @@ eco5_bx2 MACH_ECO5_BX2 ECO5_BX2 4572
- eukrea_cpuimx28sd MACH_EUKREA_CPUIMX28SD EUKREA_CPUIMX28SD 4573
- domotab MACH_DOMOTAB DOMOTAB 4574
- pfla03 MACH_PFLA03 PFLA03 4575
-+wg302v1 MACH_WG302V1 WG302V1 889
-+pronghorn MACH_PRONGHORN PRONGHORN 928
-+pronghorn_metro MACH_PRONGHORNMETRO PRONGHORNMETRO 1040
-+sidewinder MACH_SIDEWINDER SIDEWINDER 1041
-+wrt300nv2 MACH_WRT300NV2 WRT300NV2 1077
-+compex42x MACH_COMPEXWP18 COMPEXWP18 1273
-+cambria MACH_CAMBRIA CAMBRIA 1468
-+ap1000 MACH_AP1000 AP1000 1543
-+tw2662 MACH_TW2662 TW2662 1658
-+tw5334 MACH_TW5334 TW5334 1664
-+usr8200 MACH_USR8200 USR8200 1762
-+mi424wr MACH_MI424WR MI424WR 1778
diff --git a/target/linux/ixp4xx/patches-4.9/090-increase_entropy_pools.patch b/target/linux/ixp4xx/patches-4.9/090-increase_entropy_pools.patch
deleted file mode 100644
index 9da213911e..0000000000
--- a/target/linux/ixp4xx/patches-4.9/090-increase_entropy_pools.patch
+++ /dev/null
@@ -1,17 +0,0 @@
---- a/drivers/char/random.c
-+++ b/drivers/char/random.c
-@@ -279,11 +279,11 @@
- /*
- * Configuration information
- */
--#define INPUT_POOL_SHIFT 12
-+#define INPUT_POOL_SHIFT 13
- #define INPUT_POOL_WORDS (1 << (INPUT_POOL_SHIFT-5))
--#define OUTPUT_POOL_SHIFT 10
-+#define OUTPUT_POOL_SHIFT 11
- #define OUTPUT_POOL_WORDS (1 << (OUTPUT_POOL_SHIFT-5))
--#define SEC_XFER_SIZE 512
-+#define SEC_XFER_SIZE 1024
- #define EXTRACT_SIZE 10
-
- #define DEBUG_RANDOM_BOOT 0
diff --git a/target/linux/ixp4xx/patches-4.9/100-wg302v2_gateway7001_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.9/100-wg302v2_gateway7001_mac_plat_info.patch
deleted file mode 100644
index 317103fdab..0000000000
--- a/target/linux/ixp4xx/patches-4.9/100-wg302v2_gateway7001_mac_plat_info.patch
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
-+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
-@@ -17,6 +17,7 @@
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/dma-mapping.h>
-
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -75,9 +76,37 @@ static struct platform_device gateway700
- .resource = &gateway7001_uart_resource,
- };
-
-+static struct eth_plat_info gateway7001_plat_eth[] = {
-+ {
-+ .phy = 1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 2,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device gateway7001_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = gateway7001_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = gateway7001_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
- static struct platform_device *gateway7001_devices[] __initdata = {
- &gateway7001_flash,
-- &gateway7001_uart
-+ &gateway7001_uart,
-+ &gateway7001_eth[0],
-+ &gateway7001_eth[1],
- };
-
- static void __init gateway7001_init(void)
---- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
-@@ -76,9 +76,26 @@ static struct platform_device wg302v2_ua
- .resource = &wg302v2_uart_resource,
- };
-
-+static struct eth_plat_info wg302v2_plat_eth[] = {
-+ {
-+ .phy = 8,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device wg302v2_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wg302v2_plat_eth,
-+ }
-+};
-+
- static struct platform_device *wg302v2_devices[] __initdata = {
- &wg302v2_flash,
- &wg302v2_uart,
-+ &wg302v2_eth[0],
- };
-
- static void __init wg302v2_init(void)
diff --git a/target/linux/ixp4xx/patches-4.9/105-wg302v1_support.patch b/target/linux/ixp4xx/patches-4.9/105-wg302v1_support.patch
deleted file mode 100644
index 8793549c64..0000000000
--- a/target/linux/ixp4xx/patches-4.9/105-wg302v1_support.patch
+++ /dev/null
@@ -1,261 +0,0 @@
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -13,6 +13,7 @@ CONFIG_MACH_AVILA=y
- CONFIG_MACH_LOFT=y
- CONFIG_ARCH_ADI_COYOTE=y
- CONFIG_MACH_GATEWAY7001=y
-+CONFIG_MACH_WG302V1=y
- CONFIG_MACH_WG302V2=y
- CONFIG_ARCH_IXDP425=y
- CONFIG_MACH_IXDPG425=y
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -45,6 +45,14 @@ config MACH_GATEWAY7001
- 7001 Access Point. For more information on this platform,
- see http://openwrt.org
-
-+config MACH_WG302V1
-+ bool "Netgear WG302 v1 / WAG302 v1"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Netgear's
-+ WG302 v1 or WAG302 v1 Access Points. For more information
-+ on this platform, see http://openwrt.org
-+
- config MACH_WG302V2
- bool "Netgear WG302 v2 / WAG302 v2"
- select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-p
- obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
- obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
-+obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o
-@@ -33,6 +34,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.
- obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
-+obj-$(CONFIG_MACH_WG302V1) += wg302v1-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wg302v1-pci.c
-@@ -0,0 +1,63 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wg302v1-pci.c
-+ *
-+ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Software, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init wg302v1_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wg302v1_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else
-+ return -1;
-+}
-+
-+struct hw_pci wg302v1_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wg302v1_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = wg302v1_map_irq,
-+};
-+
-+int __init wg302v1_pci_init(void)
-+{
-+ if (machine_is_wg302v1())
-+ pci_common_init(&wg302v1_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wg302v1_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -0,0 +1,147 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wg302v1-setup.c
-+ *
-+ * Board setup for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wg302v1_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wg302v1_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wg302v1_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wg302v1_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wg302v1_flash_resource,
-+};
-+
-+static struct resource wg302v1_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port wg302v1_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wg302v1_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wg302v1_uart_data,
-+ },
-+ .num_resources = 2,
-+ .resource = wg302v1_uart_resources,
-+};
-+
-+static struct eth_plat_info wg302v1_plat_eth[] = {
-+ {
-+ .phy = 30,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device wg302v1_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wg302v1_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *wg302v1_devices[] __initdata = {
-+ &wg302v1_flash,
-+ &wg302v1_uart,
-+ &wg302v1_eth[0],
-+};
-+
-+static void __init wg302v1_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WG302V1
-+MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
-+ /* Maintainer: Imre Kaloz <kaloz at openwrt.org> */
-+ .fixup = wg302v1_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = wg302v1_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-4.9/110-pronghorn_series_support.patch b/target/linux/ixp4xx/patches-4.9/110-pronghorn_series_support.patch
deleted file mode 100644
index d1fdfcba49..0000000000
--- a/target/linux/ixp4xx/patches-4.9/110-pronghorn_series_support.patch
+++ /dev/null
@@ -1,393 +0,0 @@
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -15,6 +15,8 @@ CONFIG_ARCH_ADI_COYOTE=y
- CONFIG_MACH_GATEWAY7001=y
- CONFIG_MACH_WG302V1=y
- CONFIG_MACH_WG302V2=y
-+CONFIG_MACH_PRONGHORN=y
-+CONFIG_MACH_PRONGHORNMETRO=y
- CONFIG_ARCH_IXDP425=y
- CONFIG_MACH_IXDPG425=y
- CONFIG_MACH_IXDP465=y
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -61,6 +61,22 @@ config MACH_WG302V2
- WG302 v2 or WAG302 v2 Access Points. For more information
- on this platform, see http://openwrt.org
-
-+config MACH_PRONGHORN
-+ bool "ADI Pronghorn series"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the ADI
-+ Engineering Pronghorn series. For more
-+ information on this platform, see http://www.adiengineering.com
-+
-+#
-+# There're only minimal differences kernel-wise between the Pronghorn and
-+# Pronghorn Metro boards - they use different chip selects to drive the
-+# CF slot connected to the expansion bus, so we just enable them together.
-+#
-+config MACH_PRONGHORNMETRO
-+ def_bool MACH_PRONGHORN
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_WG302V1) += wg302
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o
-+obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
-
- obj-y += common.o
-
-@@ -39,6 +40,7 @@ obj-$(CONFIG_MACH_WG302V2) += wg302v2-se
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
- obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o
-+obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -42,7 +42,8 @@ static __inline__ void __arch_decomp_set
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
-- machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
-+ machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
-+ machine_is_pronghorn() || machine_is_pronghorn_metro())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/pronghorn-pci.c
-@@ -0,0 +1,69 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghorn-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Pronghorn series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init pronghorn_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init pronghorn_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 13)
-+ return IRQ_IXP4XX_GPIO4;
-+ else if (slot == 14)
-+ return IRQ_IXP4XX_GPIO6;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 16)
-+ return IRQ_IXP4XX_GPIO1;
-+ else
-+ return -1;
-+}
-+
-+struct hw_pci pronghorn_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = pronghorn_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = pronghorn_map_irq,
-+};
-+
-+int __init pronghorn_pci_init(void)
-+{
-+ if (machine_is_pronghorn() || machine_is_pronghorn_metro())
-+ pci_common_init(&pronghorn_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(pronghorn_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -0,0 +1,252 @@
-+/*
-+ * arch/arm/mach-ixp4xx/pronghorn-setup.c
-+ *
-+ * Board setup for the ADI Engineering Pronghorn series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz at openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz at openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/leds.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data pronghorn_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource pronghorn_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device pronghorn_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &pronghorn_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &pronghorn_flash_resource,
-+};
-+
-+static struct resource pronghorn_uart_resources [] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port pronghorn_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device pronghorn_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = pronghorn_uart_data,
-+ },
-+ .num_resources = 2,
-+ .resource = pronghorn_uart_resources,
-+};
-+
-+static struct i2c_gpio_platform_data pronghorn_i2c_gpio_data = {
-+ .sda_pin = 9,
-+ .scl_pin = 10,
-+};
-+
-+static struct platform_device pronghorn_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &pronghorn_i2c_gpio_data,
-+ },
-+};
-+
-+static struct gpio_led pronghorn_led_pin[] = {
-+ {
-+ .name = "pronghorn:green:status",
-+ .gpio = 7,
-+ }
-+};
-+
-+static struct gpio_led_platform_data pronghorn_led_data = {
-+ .num_leds = 1,
-+ .leds = pronghorn_led_pin,
-+};
-+
-+static struct platform_device pronghorn_led = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &pronghorn_led_data,
-+};
-+
-+static struct resource pronghorn_pata_resources[] = {
-+ {
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "intrq",
-+ .start = IRQ_IXP4XX_GPIO0,
-+ .end = IRQ_IXP4XX_GPIO0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct ixp4xx_pata_data pronghorn_pata_data = {
-+ .cs0_bits = 0xbfff0043,
-+ .cs1_bits = 0xbfff0043,
-+};
-+
-+static struct platform_device pronghorn_pata = {
-+ .name = "pata_ixp4xx_cf",
-+ .id = 0,
-+ .dev.platform_data = &pronghorn_pata_data,
-+ .num_resources = ARRAY_SIZE(pronghorn_pata_resources),
-+ .resource = pronghorn_pata_resources,
-+};
-+
-+static struct eth_plat_info pronghorn_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device pronghorn_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = pronghorn_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = pronghorn_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *pronghorn_devices[] __initdata = {
-+ &pronghorn_flash,
-+ &pronghorn_uart,
-+ &pronghorn_led,
-+ &pronghorn_eth[0],
-+ &pronghorn_eth[1],
-+};
-+
-+static void __init pronghorn_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ pronghorn_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ pronghorn_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(pronghorn_devices, ARRAY_SIZE(pronghorn_devices));
-+
-+ if (machine_is_pronghorn()) {
-+ pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
-+ pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
-+
-+ pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
-+ pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
-+
-+ pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
-+ pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+ } else {
-+ pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(3);
-+ pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(3);
-+
-+ pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(4);
-+ pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(4);
-+
-+ pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
-+ pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS4;
-+
-+ platform_device_register(&pronghorn_i2c_gpio);
-+ }
-+
-+ platform_device_register(&pronghorn_pata);
-+}
-+
-+MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn")
-+ /* Maintainer: Imre Kaloz <kaloz at openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = pronghorn_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+
-+MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
-+ /* Maintainer: Imre Kaloz <kaloz at openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = pronghorn_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-4.9/111-pronghorn_swap_uarts.patch b/target/linux/ixp4xx/patches-4.9/111-pronghorn_swap_uarts.patch
deleted file mode 100644
index ed9f7a785d..0000000000
--- a/target/linux/ixp4xx/patches-4.9/111-pronghorn_swap_uarts.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/arm/mach-ixp4xx/pronghorn-setup.c
-+++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -52,31 +52,31 @@ static struct platform_device pronghorn_
-
- static struct resource pronghorn_uart_resources [] = {
- {
-- .start = IXP4XX_UART1_BASE_PHYS,
-- .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- },
- {
-- .start = IXP4XX_UART2_BASE_PHYS,
-- .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- }
- };
-
- static struct plat_serial8250_port pronghorn_uart_data[] = {
- {
-- .mapbase = IXP4XX_UART1_BASE_PHYS,
-- .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-- .irq = IRQ_IXP4XX_UART1,
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- },
- {
-- .mapbase = IXP4XX_UART2_BASE_PHYS,
-- .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-- .irq = IRQ_IXP4XX_UART2,
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
diff --git a/target/linux/ixp4xx/patches-4.9/115-sidewinder_support.patch b/target/linux/ixp4xx/patches-4.9/115-sidewinder_support.patch
deleted file mode 100644
index 20adbb5c04..0000000000
--- a/target/linux/ixp4xx/patches-4.9/115-sidewinder_support.patch
+++ /dev/null
@@ -1,286 +0,0 @@
-From 95dac4a842a3c66f69f949b48f9075e16275f77b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo at openwrt.org>
-Date: Sun, 30 Jun 2013 15:48:47 +0200
-Subject: [PATCH 07/36] 115-sidewinder_support.patch
-
----
- arch/arm/mach-ixp4xx/Kconfig | 10 +-
- arch/arm/mach-ixp4xx/Makefile | 2 +
- arch/arm/mach-ixp4xx/sidewinder-pci.c | 68 ++++++++++++++
- arch/arm/mach-ixp4xx/sidewinder-setup.c | 151 +++++++++++++++++++++++++++++++
- 4 files changed, 230 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/mach-ixp4xx/sidewinder-pci.c
- create mode 100644 arch/arm/mach-ixp4xx/sidewinder-setup.c
-
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -77,6 +77,14 @@ config MACH_PRONGHORN
- config MACH_PRONGHORNMETRO
- def_bool MACH_PRONGHORN
-
-+config MACH_SIDEWINDER
-+ bool "ADI Sidewinder"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the ADI
-+ Engineering Sidewinder board. For more information on this
-+ platform, see http://www.adiengineering.com
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-@@ -173,7 +181,7 @@ config MACH_ARCOM_VULCAN
- #
- config CPU_IXP46X
- bool
-- depends on MACH_IXDP465
-+ depends on MACH_IXDP465 || MACH_SIDEWINDER
- default y
-
- config CPU_IXP43X
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
-+obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
-
- obj-y += common.o
-
-@@ -41,6 +42,7 @@ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
- obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o
- obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
-+obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/sidewinder-pci.c
-@@ -0,0 +1,67 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init sidewinder_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init sidewinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else
-+ return -1;
-+}
-+
-+struct hw_pci sidewinder_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = sidewinder_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = sidewinder_map_irq,
-+};
-+
-+int __init sidewinder_pci_init(void)
-+{
-+ if (machine_is_sidewinder())
-+ pci_common_init(&sidewinder_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(sidewinder_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
-@@ -0,0 +1,155 @@
-+/*
-+ * arch/arm/mach-ixp4xx/sidewinder-setup.c
-+ *
-+ * Board setup for the ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz at openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz at openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data sidewinder_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource sidewinder_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device sidewinder_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &sidewinder_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &sidewinder_flash_resource,
-+};
-+
-+static struct resource sidewinder_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port sidewinder_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device sidewinder_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = sidewinder_uart_data,
-+ },
-+ .num_resources = ARRAY_SIZE(sidewinder_uart_resources),
-+ .resource = sidewinder_uart_resources,
-+};
-+
-+static struct eth_plat_info sidewinder_plat_eth[] = {
-+ {
-+ .phy = 5,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }, {
-+ .phy = 31,
-+ .rxq = 2,
-+ .txreadyq = 19,
-+ }
-+};
-+
-+static struct platform_device sidewinder_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = sidewinder_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = sidewinder_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEA,
-+ .dev.platform_data = sidewinder_plat_eth + 2,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *sidewinder_devices[] __initdata = {
-+ &sidewinder_flash,
-+ &sidewinder_uart,
-+ &sidewinder_eth[0],
-+ &sidewinder_eth[1],
-+ &sidewinder_eth[2],
-+};
-+
-+static void __init sidewinder_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
-+}
-+
-+MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
-+ /* Maintainer: Imre Kaloz <kaloz at openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = sidewinder_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-4.9/116-sidewinder_fis_location.patch b/target/linux/ixp4xx/patches-4.9/116-sidewinder_fis_location.patch
deleted file mode 100644
index 8a28eb0a7a..0000000000
--- a/target/linux/ixp4xx/patches-4.9/116-sidewinder_fis_location.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -31,6 +31,8 @@
- #include <linux/module.h>
- #include <linux/mod_devicetable.h>
-
-+#include <asm/mach-types.h>
-+
- struct fis_image_desc {
- unsigned char name[16]; // Null terminated name
- uint32_t flash_base; // Address within FLASH of image
-@@ -48,7 +50,8 @@ struct fis_list {
- struct fis_list *next;
- };
-
--static int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
-+int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
-+
- module_param(directory, int, 0);
-
- static inline int redboot_checksum(struct fis_image_desc *img)
-@@ -76,6 +79,8 @@ static int parse_redboot_partitions(stru
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- static char nullstring[] = "unallocated";
- #endif
-+ if (machine_is_sidewinder())
-+ directory = -5;
-
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
diff --git a/target/linux/ixp4xx/patches-4.9/120-compex_support.patch b/target/linux/ixp4xx/patches-4.9/120-compex_support.patch
deleted file mode 100644
index 2abc159f04..0000000000
--- a/target/linux/ixp4xx/patches-4.9/120-compex_support.patch
+++ /dev/null
@@ -1,199 +0,0 @@
-From 24025a2dcf1248079dd3019fac6ed955252d277f Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz at openwrt.org>
-Date: Mon, 14 Jul 2008 21:56:34 +0200
-Subject: [PATCH] Add support for the Compex WP18 / NP18A boards
-
-Signed-off-by: Imre Kaloz <kaloz at openwrt.org>
----
-
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -85,6 +85,14 @@ config MACH_SIDEWINDER
- Engineering Sidewinder board. For more information on this
- platform, see http://www.adiengineering.com
-
-+config MACH_COMPEXWP18
-+ bool "Compex WP18 / NP18A"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Compex'
-+ WP18 or NP18A boards. For more information on this
-+ platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
-+obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixdp425-pci.o
-
- obj-y += common.o
-
-@@ -43,6 +44,7 @@ obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_
- obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o
- obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
-+obj-$(CONFIG_MACH_COMPEXWP18) += compex42x-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/compex42x-setup.c
-@@ -0,0 +1,141 @@
-+/*
-+ * arch/arm/mach-ixp4xx/compex-setup.c
-+ *
-+ * Compex WP18 / NP18A board-setup
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz at openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz at openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data compex42x_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource compex42x_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device compex42x_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &compex42x_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &compex42x_flash_resource,
-+};
-+
-+static struct resource compex42x_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port compex42x_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device compex42x_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = compex42x_uart_data,
-+ .num_resources = 2,
-+ .resource = compex42x_uart_resources,
-+};
-+
-+static struct eth_plat_info compex42x_plat_eth[] = {
-+ {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0xf0000,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 3,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device compex42x_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = compex42x_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = compex42x_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *compex42x_devices[] __initdata = {
-+ &compex42x_flash,
-+ &compex42x_uart,
-+ &compex42x_eth[0],
-+ &compex42x_eth[1],
-+};
-+
-+static void __init compex42x_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ compex42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ compex42x_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ platform_add_devices(compex42x_devices, ARRAY_SIZE(compex42x_devices));
-+}
-+
-+MACHINE_START(COMPEXWP18, "Compex WP18 / NP18A")
-+ /* Maintainer: Imre Kaloz <Kaloz at openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = compex42x_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
---- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -69,7 +69,8 @@ struct hw_pci ixdp425_pci __initdata = {
- int __init ixdp425_pci_init(void)
- {
- if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-- machine_is_ixdp465() || machine_is_kixrp435())
-+ machine_is_ixdp465() || machine_is_kixrp435() ||
-+ machine_is_compex42x())
- pci_common_init(&ixdp425_pci);
- return 0;
- }
diff --git a/target/linux/ixp4xx/patches-4.9/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-4.9/130-wrt300nv2_support.patch
deleted file mode 100644
index 49359be447..0000000000
--- a/target/linux/ixp4xx/patches-4.9/130-wrt300nv2_support.patch
+++ /dev/null
@@ -1,227 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -93,6 +93,14 @@ config MACH_COMPEXWP18
- WP18 or NP18A boards. For more information on this
- platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
-
-+config MACH_WRT300NV2
-+ bool "Linksys WRT300N v2"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Linksys'
-+ WRT300N v2 router. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += v
- obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
- obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
-
- obj-y += common.o
-
-@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulca
- obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
- obj-$(CONFIG_MACH_COMPEXWP18) += compex42x-setup.o
-+obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -43,7 +43,8 @@ static __inline__ void __arch_decomp_set
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
- machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
-- machine_is_pronghorn() || machine_is_pronghorn_metro())
-+ machine_is_pronghorn() || machine_is_pronghorn_metro() ||
-+ machine_is_wrt300nv2())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
-@@ -0,0 +1,64 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
-+ *
-+ * PCI setup routines for Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init wrt300nv2_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wrt300nv2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else return -1;
-+}
-+
-+struct hw_pci wrt300nv2_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wrt300nv2_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = wrt300nv2_map_irq,
-+};
-+
-+int __init wrt300nv2_pci_init(void)
-+{
-+ if (machine_is_wrt300nv2())
-+ pci_common_init(&wrt300nv2_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wrt300nv2_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -0,0 +1,110 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+ *
-+ * Board setup for the Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz at openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz at openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wrt300nv2_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wrt300nv2_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wrt300nv2_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wrt300nv2_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_flash_resource,
-+};
-+
-+static struct resource wrt300nv2_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port wrt300nv2_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wrt300nv2_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wrt300nv2_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_uart_resource,
-+};
-+
-+static struct platform_device *wrt300nv2_devices[] __initdata = {
-+ &wrt300nv2_flash,
-+ &wrt300nv2_uart
-+};
-+
-+static void __init wrt300nv2_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WRT300NV2
-+MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
-+ /* Maintainer: Imre Kaloz <kaloz at openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = wrt300nv2_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-4.9/131-wrt300nv2_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.9/131-wrt300nv2_mac_plat_info.patch
deleted file mode 100644
index 5debbf1072..0000000000
--- a/target/linux/ixp4xx/patches-4.9/131-wrt300nv2_mac_plat_info.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -76,9 +76,38 @@ static struct platform_device wrt300nv2_
- .resource = &wrt300nv2_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info wrt300nv2_plat_eth[] = {
-+ {
-+ .phy = -1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device wrt300nv2_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wrt300nv2_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = wrt300nv2_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
- static struct platform_device *wrt300nv2_devices[] __initdata = {
- &wrt300nv2_flash,
-- &wrt300nv2_uart
-+ &wrt300nv2_uart,
-+ &wrt300nv2_eth[0],
-+ &wrt300nv2_eth[1],
- };
-
- static void __init wrt300nv2_init(void)
diff --git a/target/linux/ixp4xx/patches-4.9/132-wrt300nv2_mac_fix.patch b/target/linux/ixp4xx/patches-4.9/132-wrt300nv2_mac_fix.patch
deleted file mode 100644
index 99db2673d0..0000000000
--- a/target/linux/ixp4xx/patches-4.9/132-wrt300nv2_mac_fix.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -3,6 +3,7 @@
- *
- * Board setup for the Linksys WRT300N v2
- *
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex at ozo.com>
- * Copyright (C) 2007 Imre Kaloz <Kaloz at openwrt.org>
- *
- * based on coyote-setup.c:
-@@ -18,6 +19,7 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#include <linux/etherdevice.h>
-
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -79,7 +81,8 @@ static struct platform_device wrt300nv2_
- /* Built-in 10/100 Ethernet MAC interfaces */
- static struct eth_plat_info wrt300nv2_plat_eth[] = {
- {
-- .phy = -1,
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x0F0000,
- .rxq = 3,
- .txreadyq = 20,
- }, {
-@@ -112,6 +115,10 @@ static struct platform_device *wrt300nv2
-
- static void __init wrt300nv2_init(void)
- {
-+ uint8_t __iomem *f;
-+ int offset = 0;
-+ int i;
-+
- ixp4xx_sys_init();
-
- wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-@@ -121,6 +128,32 @@ static void __init wrt300nv2_init(void)
- *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
- platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+
-+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x60000);
-+
-+ if (f) {
-+ for (i = 0; i < 6; i++) {
-+#ifdef __ARMEB__
-+ wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + i);
-+ if (i == 5)
-+ offset = 1;
-+ wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#else
-+ wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + (i^3));
-+ if (i == 5)
-+ offset = 1;
-+ wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#endif
-+ }
-+ iounmap(f);
-+ }
-+
-+ if (!(is_valid_ether_addr(wrt300nv2_plat_eth[0].hwaddr)))
-+ random_ether_addr(wrt300nv2_plat_eth[0].hwaddr);
-+ if (!(is_valid_ether_addr(wrt300nv2_plat_eth[1].hwaddr))) {
-+ memcpy(wrt300nv2_plat_eth[1].hwaddr, wrt300nv2_plat_eth[0].hwaddr, ETH_ALEN);
-+ wrt300nv2_plat_eth[1].hwaddr[5] = (wrt300nv2_plat_eth[0].hwaddr[5] + 1);
-+ }
- }
-
- #ifdef CONFIG_MACH_WRT300NV2
diff --git a/target/linux/ixp4xx/patches-4.9/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-4.9/150-lanready_ap1000_support.patch
deleted file mode 100644
index fb5c3adb76..0000000000
--- a/target/linux/ixp4xx/patches-4.9/150-lanready_ap1000_support.patch
+++ /dev/null
@@ -1,201 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -101,6 +101,14 @@ config MACH_WRT300NV2
- WRT300N v2 router. For more information on this
- platform, see http://openwrt.org
-
-+config MACH_AP1000
-+ bool "Lanready AP-1000"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Lanready's
-+ AP1000 board. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN) += pron
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
- obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
-+obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-
- obj-y += common.o
-
-@@ -47,6 +48,7 @@ obj-$(CONFIG_MACH_PRONGHORN) += pronghor
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
- obj-$(CONFIG_MACH_COMPEXWP18) += compex42x-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
-+obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -0,0 +1,152 @@
-+/*
-+ * arch/arm/mach-ixp4xx/ap1000-setup.c
-+ *
-+ * Lanready AP-1000
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz at openwrt.org>
-+ *
-+ * based on ixdp425-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz at openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data ap1000_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource ap1000_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device ap1000_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ap1000_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &ap1000_flash_resource,
-+};
-+
-+static struct resource ap1000_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port ap1000_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device ap1000_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = ap1000_uart_data,
-+ .num_resources = 2,
-+ .resource = ap1000_uart_resources
-+};
-+
-+static struct platform_device *ap1000_devices[] __initdata = {
-+ &ap1000_flash,
-+ &ap1000_uart
-+};
-+
-+static char ap1000_mem_fixup[] __initdata = "mem=64M ";
-+
-+static void __init ap1000_fixup(struct tag *tags, char **cmdline)
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
-+static void __init ap1000_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ ap1000_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
-+}
-+
-+#ifdef CONFIG_MACH_AP1000
-+MACHINE_START(AP1000, "Lanready AP-1000")
-+ /* Maintainer: Imre Kaloz <Kaloz at openwrt.org> */
-+ .fixup = ap1000_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = ap1000_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+#endif
---- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -70,7 +70,7 @@ int __init ixdp425_pci_init(void)
- {
- if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
- machine_is_ixdp465() || machine_is_kixrp435() ||
-- machine_is_compex42x())
-+ machine_is_compex42x() || machine_is_ap1000())
- pci_common_init(&ixdp425_pci);
- return 0;
- }
diff --git a/target/linux/ixp4xx/patches-4.9/151-lanready_ap1000_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.9/151-lanready_ap1000_mac_plat_info.patch
deleted file mode 100644
index a3ed2d066e..0000000000
--- a/target/linux/ixp4xx/patches-4.9/151-lanready_ap1000_mac_plat_info.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ap1000-setup.c
-+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -91,9 +91,39 @@ static struct platform_device ap1000_uar
- .resource = ap1000_uart_resources
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ap1000_plat_eth[] = {
-+ {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 5,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ap1000_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ap1000_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ap1000_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
- static struct platform_device *ap1000_devices[] __initdata = {
-- &ap1000_flash,
-- &ap1000_uart
-+ &ap1000_flash,
-+ &ap1000_uart,
-+ &ap1000_eth[0],
-+ &ap1000_eth[1],
- };
-
- static char ap1000_mem_fixup[] __initdata = "mem=64M ";
diff --git a/target/linux/ixp4xx/patches-4.9/160-delayed_uart_io.patch b/target/linux/ixp4xx/patches-4.9/160-delayed_uart_io.patch
deleted file mode 100644
index 95cc5680cd..0000000000
--- a/target/linux/ixp4xx/patches-4.9/160-delayed_uart_io.patch
+++ /dev/null
@@ -1,133 +0,0 @@
---- a/drivers/tty/serial/8250/8250_core.c
-+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -833,6 +833,7 @@ static int serial8250_probe(struct platf
- uart.port.get_mctrl = p->get_mctrl;
- uart.port.pm = p->pm;
- uart.port.dev = &dev->dev;
-+ uart.port.rw_delay = p->rw_delay;
- uart.port.irqflags |= irqflag;
- ret = serial8250_register_8250_port(&uart);
- if (ret < 0) {
-@@ -989,6 +990,7 @@ int serial8250_register_8250_port(struct
- uart->bugs = up->bugs;
- uart->port.mapbase = up->port.mapbase;
- uart->port.mapsize = up->port.mapsize;
-+ uart->port.rw_delay = up->port.rw_delay;
- uart->port.private_data = up->port.private_data;
- uart->tx_loadsz = up->tx_loadsz;
- uart->capabilities = up->capabilities;
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -2259,6 +2259,7 @@ uart_report_port(struct uart_driver *drv
- snprintf(address, sizeof(address),
- "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
- break;
-+ case UPIO_MEM_DELAY:
- case UPIO_MEM:
- case UPIO_MEM16:
- case UPIO_MEM32:
-@@ -2931,6 +2932,7 @@ int uart_match_port(struct uart_port *po
- case UPIO_HUB6:
- return (port1->iobase == port2->iobase) &&
- (port1->hub6 == port2->hub6);
-+ case UPIO_MEM_DELAY:
- case UPIO_MEM:
- case UPIO_MEM16:
- case UPIO_MEM32:
---- a/include/linux/serial_8250.h
-+++ b/include/linux/serial_8250.h
-@@ -28,6 +28,7 @@ struct plat_serial8250_port {
- void *private_data;
- unsigned char regshift; /* register shift */
- unsigned char iotype; /* UPIO_* */
-+ unsigned int rw_delay; /* udelay for slower busses IXP4XX Expansion Bus */
- unsigned char hub6;
- upf_t flags; /* UPF_* flags */
- unsigned int type; /* If UPF_FIXED_TYPE */
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -152,6 +152,7 @@ struct uart_port {
- #define UPIO_TSI (SERIAL_IO_TSI) /* Tsi108/109 type IO */
- #define UPIO_MEM32BE (SERIAL_IO_MEM32BE) /* 32b big endian */
- #define UPIO_MEM16 (SERIAL_IO_MEM16) /* 16b little endian */
-+#define UPIO_MEM_DELAY (SERIAL_IO_MEM_DELAY)
-
- unsigned int read_status_mask; /* driver specific */
- unsigned int ignore_status_mask; /* driver specific */
-@@ -234,6 +235,7 @@ struct uart_port {
- int hw_stopped; /* sw-assisted CTS flow state */
- unsigned int mctrl; /* current modem ctrl settings */
- unsigned int timeout; /* character-based timeout */
-+ unsigned int rw_delay; /* udelay for slow busses, IXP4XX Expansion Bus */
- unsigned int type; /* port type */
- const struct uart_ops *ops;
- unsigned int custom_divisor;
---- a/drivers/tty/serial/8250/8250_port.c
-+++ b/drivers/tty/serial/8250/8250_port.c
-@@ -383,6 +383,20 @@ static unsigned int mem16_serial_in(stru
- return readw(p->membase + offset);
- }
-
-+static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)p;
-+ udelay(up->port.rw_delay);
-+ return mem_serial_in(p, offset);
-+}
-+
-+static void memdelay_serial_out(struct uart_port *p, int offset, int value)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)p;
-+ udelay(up->port.rw_delay);
-+ mem_serial_out(p, offset, value);
-+}
-+
- static void mem32_serial_out(struct uart_port *p, int offset, int value)
- {
- offset = offset << p->regshift;
-@@ -455,6 +469,11 @@ static void set_io_from_upio(struct uart
- p->serial_out = mem32be_serial_out;
- break;
-
-+ case UPIO_MEM_DELAY:
-+ p->serial_in = memdelay_serial_in;
-+ p->serial_out = memdelay_serial_out;
-+ break;
-+
- #ifdef CONFIG_SERIAL_8250_RT288X
- case UPIO_AU:
- p->serial_in = au_serial_in;
-@@ -482,6 +501,7 @@ serial_port_out_sync(struct uart_port *p
- case UPIO_MEM16:
- case UPIO_MEM32:
- case UPIO_MEM32BE:
-+ case UPIO_MEM_DELAY:
- case UPIO_AU:
- p->serial_out(p, offset, value);
- p->serial_in(p, UART_LCR); /* safe, no side-effects */
-@@ -2759,6 +2779,7 @@ static int serial8250_request_std_resour
- case UPIO_MEM32BE:
- case UPIO_MEM16:
- case UPIO_MEM:
-+ case UPIO_MEM_DELAY:
- if (!port->mapbase)
- break;
-
-@@ -2797,6 +2818,7 @@ static void serial8250_release_std_resou
- case UPIO_MEM32BE:
- case UPIO_MEM16:
- case UPIO_MEM:
-+ case UPIO_MEM_DELAY:
- if (!port->mapbase)
- break;
-
---- a/include/uapi/linux/serial.h
-+++ b/include/uapi/linux/serial.h
-@@ -70,6 +70,7 @@ struct serial_struct {
- #define SERIAL_IO_TSI 5
- #define SERIAL_IO_MEM32BE 6
- #define SERIAL_IO_MEM16 7
-+#define SERIAL_IO_MEM_DELAY 10
-
- #define UART_CLEAR_FIFO 0x01
- #define UART_USE_FIFO 0x02
diff --git a/target/linux/ixp4xx/patches-4.9/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-4.9/162-wg302v1_mem_fixup.patch
deleted file mode 100644
index efa389d786..0000000000
--- a/target/linux/ixp4xx/patches-4.9/162-wg302v1_mem_fixup.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -117,6 +117,34 @@ static struct platform_device *wg302v1_d
- &wg302v1_eth[0],
- };
-
-+static char wg302v1_mem_fixup[] __initdata = " mem=32M";
-+
-+static void __init wg302v1_fixup(struct tag *tags, char **cmdline)
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+ size_t fixlen, cmdlen;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ fixlen = strlen(wg302v1_mem_fixup);
-+ cmdlen = strlen(p);
-+ if (fixlen + cmdlen >= COMMAND_LINE_SIZE)
-+ return;
-+
-+ /* append the fixup to the cmdline */
-+ memmove(p + cmdlen, wg302v1_mem_fixup, fixlen + 1);
-+
-+ /* Adjust the size of the atag if there was one */
-+ if (t->hdr.size)
-+ t->hdr.size += fixlen;
-+}
-+
- static void __init wg302v1_init(void)
- {
- ixp4xx_sys_init();
diff --git a/target/linux/ixp4xx/patches-4.9/170-ixdpg425_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.9/170-ixdpg425_mac_plat_info.patch
deleted file mode 100644
index f7090cd1b4..0000000000
--- a/target/linux/ixp4xx/patches-4.9/170-ixdpg425_mac_plat_info.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/arm/mach-ixp4xx/coyote-setup.c
-+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
-@@ -14,6 +14,7 @@
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/dma-mapping.h>
-
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -81,9 +82,39 @@ static struct platform_device coyote_uar
- .resource = &coyote_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ixdpg425_plat_eth[] = {
-+ {
-+ .phy = 5,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 4,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ixdpg425_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ixdpg425_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ixdpg425_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+
- static struct platform_device *coyote_devices[] __initdata = {
- &coyote_flash,
-- &coyote_uart
-+ &coyote_uart,
-+ &ixdpg425_eth[0],
-+ &ixdpg425_eth[1],
- };
-
- static void __init coyote_init(void)
diff --git a/target/linux/ixp4xx/patches-4.9/175-avila_hss_audio_support.patch b/target/linux/ixp4xx/patches-4.9/175-avila_hss_audio_support.patch
deleted file mode 100644
index 398344d188..0000000000
--- a/target/linux/ixp4xx/patches-4.9/175-avila_hss_audio_support.patch
+++ /dev/null
@@ -1,2093 +0,0 @@
---- a/sound/soc/Kconfig
-+++ b/sound/soc/Kconfig
-@@ -47,6 +47,7 @@ source "sound/soc/cirrus/Kconfig"
- source "sound/soc/davinci/Kconfig"
- source "sound/soc/dwc/Kconfig"
- source "sound/soc/fsl/Kconfig"
-+source "sound/soc/gw-avila/Kconfig"
- source "sound/soc/jz4740/Kconfig"
- source "sound/soc/nuc900/Kconfig"
- source "sound/soc/omap/Kconfig"
---- a/sound/soc/Makefile
-+++ b/sound/soc/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_SND_SOC) += cirrus/
- obj-$(CONFIG_SND_SOC) += davinci/
- obj-$(CONFIG_SND_SOC) += dwc/
- obj-$(CONFIG_SND_SOC) += fsl/
-+obj-$(CONFIG_SND_SOC) += gw-avila/
- obj-$(CONFIG_SND_SOC) += jz4740/
- obj-$(CONFIG_SND_SOC) += img/
- obj-$(CONFIG_SND_SOC) += intel/
---- /dev/null
-+++ b/sound/soc/gw-avila/Kconfig
-@@ -0,0 +1,17 @@
-+config SND_GW_AVILA_SOC_PCM
-+ tristate
-+
-+config SND_GW_AVILA_SOC_HSS
-+ tristate
-+
-+config SND_GW_AVILA_SOC
-+ tristate "SoC Audio for the Gateworks AVILA Family"
-+ depends on ARCH_IXP4XX && SND_SOC
-+ select SND_GW_AVILA_SOC_PCM
-+ select SND_GW_AVILA_SOC_HSS
-+ select SND_SOC_TLV320AIC3X
-+ help
-+ Say Y or M if you want to add support for codecs attached to
-+ the Gateworks HSS interface. You will also need
-+ to select the audio interfaces to support below.
-+
---- /dev/null
-+++ b/sound/soc/gw-avila/Makefile
-@@ -0,0 +1,8 @@
-+# Gateworks Avila HSS Platform Support
-+snd-soc-gw-avila-objs := gw-avila.o ixp4xx_hss.o
-+snd-soc-gw-avila-pcm-objs := gw-avila-pcm.o
-+snd-soc-gw-avila-hss-objs := gw-avila-hss.o
-+
-+obj-$(CONFIG_SND_GW_AVILA_SOC) += snd-soc-gw-avila.o
-+obj-$(CONFIG_SND_GW_AVILA_SOC_PCM) += snd-soc-gw-avila-pcm.o
-+obj-$(CONFIG_SND_GW_AVILA_SOC_HSS) += snd-soc-gw-avila-hss.o
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila-hss.c
-@@ -0,0 +1,103 @@
-+/*
-+ * gw-avila-hss.c -- HSS Audio Support for Gateworks Avila
-+ *
-+ * Author: Chris Lang <clang at gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/wait.h>
-+#include <linux/delay.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/ac97_codec.h>
-+#include <sound/initval.h>
-+#include <sound/soc.h>
-+
-+#include <asm/irq.h>
-+#include <linux/mutex.h>
-+#include <linux/gpio.h>
-+
-+#include "ixp4xx_hss.h"
-+#include "gw-avila-hss.h"
-+
-+#define gw_avila_hss_suspend NULL
-+#define gw_avila_hss_resume NULL
-+
-+struct snd_soc_dai_driver gw_avila_hss_dai = {
-+ .playback = {
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
-+ SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
-+ SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
-+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
-+ SNDRV_PCM_RATE_KNOT),
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE, },
-+ .capture = {
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
-+ SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
-+ SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
-+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
-+ SNDRV_PCM_RATE_KNOT),
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE, },
-+};
-+
-+static const struct snd_soc_component_driver gw_avila_hss_component = {
-+ .name = "gw_avila_hss",
-+};
-+
-+static int gw_avila_hss_probe(struct platform_device *pdev)
-+{
-+ int port = (pdev->id < 2) ? 0 : 1;
-+ int channel = (pdev->id % 2);
-+
-+ hss_handle[pdev->id] = hss_init(port, channel);
-+ if (!hss_handle[pdev->id]) {
-+ return -ENODEV;
-+ }
-+
-+ return snd_soc_register_component(&pdev->dev, &gw_avila_hss_component,
-+ &gw_avila_hss_dai, 1);
-+}
-+
-+static int gw_avila_hss_remove(struct platform_device *pdev)
-+{
-+ snd_soc_unregister_component(&pdev->dev);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gw_avila_hss_driver = {
-+ .probe = gw_avila_hss_probe,
-+ .remove = gw_avila_hss_remove,
-+ .driver = {
-+ .name = "gw_avila_hss",
-+ .owner = THIS_MODULE,
-+ }
-+};
-+
-+static int __init gw_avila_hss_init(void)
-+{
-+ return platform_driver_register(&gw_avila_hss_driver);
-+}
-+module_init(gw_avila_hss_init);
-+
-+static void __exit gw_avila_hss_exit(void)
-+{
-+ platform_driver_unregister(&gw_avila_hss_driver);
-+}
-+module_exit(gw_avila_hss_exit);
-+
-+MODULE_AUTHOR("Chris Lang");
-+MODULE_DESCRIPTION("HSS Audio Driver for Gateworks Avila");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila-hss.h
-@@ -0,0 +1,12 @@
-+/*
-+ * Author: Chris Lang <clang at gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _GW_AVILA_HSS_H
-+#define _GW_AVILA_HSS_H
-+
-+#endif
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila-pcm.c
-@@ -0,0 +1,327 @@
-+/*
-+ * ALSA PCM interface for the TI DAVINCI processor
-+ *
-+ * Author: Chris Lang, <clang at gateworks.com>
-+ * Copyright: (C) 2009 Gateworks Corporation
-+ *
-+ * Based On: davinci-evm.c, Author: Vladimir Barinov, <vbarinov at ru.mvista.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+
-+#include <asm/dma.h>
-+
-+#include "gw-avila-pcm.h"
-+#include "gw-avila-hss.h"
-+#include "ixp4xx_hss.h"
-+
-+#define GW_AVILA_PCM_DEBUG 0
-+#if GW_AVILA_PCM_DEBUG
-+#define DPRINTK(x...) printk(KERN_DEBUG x)
-+#else
-+#define DPRINTK(x...)
-+#endif
-+
-+static struct snd_pcm_hardware gw_avila_pcm_hardware = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
-+ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
-+/* SNDRV_PCM_INFO_PAUSE),*/
-+ .formats = (SNDRV_PCM_FMTBIT_S16_LE),
-+ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
-+ SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
-+ SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
-+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
-+ SNDRV_PCM_RATE_KNOT),
-+ .rate_min = 8000,
-+ .rate_max = 8000,
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .buffer_bytes_max = 64 * 1024, // All of the lines below may need to be changed
-+ .period_bytes_min = 128,
-+ .period_bytes_max = 4 * 1024,
-+ .periods_min = 16,
-+ .periods_max = 32,
-+ .fifo_size = 0,
-+};
-+
-+struct gw_avila_runtime_data {
-+ spinlock_t lock;
-+ int period; /* current DMA period */
-+ int master_lch; /* Master DMA channel */
-+ int slave_lch; /* Slave DMA channel */
-+ struct gw_avila_pcm_dma_params *params; /* DMA params */
-+};
-+
-+static void gw_avila_dma_irq(void *data)
-+{
-+ struct snd_pcm_substream *substream = data;
-+ snd_pcm_period_elapsed(substream);
-+}
-+
-+static int gw_avila_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct hss_device *hdev = runtime->private_data;
-+ int ret = 0;
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ case SNDRV_PCM_TRIGGER_RESUME:
-+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+ hss_tx_start(hdev);
-+ else
-+ hss_rx_start(hdev);
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ case SNDRV_PCM_TRIGGER_SUSPEND:
-+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+ hss_tx_stop(hdev);
-+ else
-+ hss_rx_stop(hdev);
-+ break;
-+ default:
-+ ret = -EINVAL;
-+ break;
-+ }
-+ return ret;
-+}
-+
-+static int gw_avila_pcm_prepare(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct hss_device *hdev = runtime->private_data;
-+
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-+ hss_set_tx_callback(hdev, gw_avila_dma_irq, substream);
-+ hss_config_tx_dma(hdev, runtime->dma_area, runtime->buffer_size, runtime->period_size);
-+ } else {
-+ hss_set_rx_callback(hdev, gw_avila_dma_irq, substream);
-+ hss_config_rx_dma(hdev, runtime->dma_area, runtime->buffer_size, runtime->period_size);
-+ }
-+
-+ return 0;
-+}
-+
-+static snd_pcm_uframes_t
-+gw_avila_pcm_pointer(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct hss_device *hdev = runtime->private_data;
-+
-+ unsigned int curr = 0;
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+ curr = hss_curr_offset_tx(hdev);
-+ else
-+ curr = hss_curr_offset_rx(hdev);
-+ return curr;
-+}
-+
-+static int gw_avila_pcm_open(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-+
-+ snd_soc_set_runtime_hwparams(substream, &gw_avila_pcm_hardware);
-+
-+ if (hss_handle[cpu_dai->id] != NULL)
-+ runtime->private_data = hss_handle[cpu_dai->id];
-+ else {
-+ pr_err("hss_handle is NULL\n");
-+ return -1;
-+ }
-+
-+ hss_chan_open(hss_handle[cpu_dai->id]);
-+
-+ return 0;
-+}
-+
-+static int gw_avila_pcm_close(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct hss_device *hdev = runtime->private_data;
-+
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-+ memset(hdev->tx_buf, 0, runtime->buffer_size);
-+ } else
-+ memset(hdev->rx_buf, 0, runtime->buffer_size);
-+
-+ hss_chan_close(hdev);
-+
-+ return 0;
-+}
-+
-+static int gw_avila_pcm_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
-+{
-+ return snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+}
-+
-+static int gw_avila_pcm_hw_free(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+ memset(runtime->dma_area, 0, runtime->buffer_size);
-+
-+ return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int gw_avila_pcm_mmap(struct snd_pcm_substream *substream,
-+ struct vm_area_struct *vma)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+ return dma_mmap_writecombine(substream->pcm->card->dev, vma,
-+ runtime->dma_area,
-+ runtime->dma_addr,
-+ runtime->dma_bytes);
-+}
-+
-+struct snd_pcm_ops gw_avila_pcm_ops = {
-+ .open = gw_avila_pcm_open,
-+ .close = gw_avila_pcm_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = gw_avila_pcm_hw_params,
-+ .hw_free = gw_avila_pcm_hw_free,
-+ .prepare = gw_avila_pcm_prepare,
-+ .trigger = gw_avila_pcm_trigger,
-+ .pointer = gw_avila_pcm_pointer,
-+ .mmap = gw_avila_pcm_mmap,
-+};
-+
-+static int gw_avila_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
-+{
-+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
-+ struct snd_dma_buffer *buf = &substream->dma_buffer;
-+ size_t size = gw_avila_pcm_hardware.buffer_bytes_max;
-+
-+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
-+ buf->dev.dev = pcm->card->dev;
-+ buf->private_data = NULL;
-+
-+ buf->area = dma_alloc_coherent(pcm->card->dev, size,
-+ &buf->addr, GFP_KERNEL);
-+
-+ if (!buf->area) {
-+ return -ENOMEM;
-+ }
-+
-+ memset(buf->area, 0xff, size);
-+
-+ DPRINTK("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
-+ (void *) buf->area, (void *) buf->addr, size);
-+
-+ buf->bytes = size;
-+
-+ return 0;
-+}
-+
-+static void gw_avila_pcm_free(struct snd_pcm *pcm)
-+{
-+ struct snd_pcm_substream *substream;
-+ struct snd_dma_buffer *buf;
-+ int stream;
-+
-+ for (stream = 0; stream < 2; stream++) {
-+ substream = pcm->streams[stream].substream;
-+ if (!substream)
-+ continue;
-+
-+ buf = &substream->dma_buffer;
-+ if (!buf->area)
-+ continue;
-+
-+ dma_free_coherent(NULL, buf->bytes, buf->area, 0);
-+ buf->area = NULL;
-+ }
-+}
-+
-+static u64 gw_avila_pcm_dmamask = 0xFFFFFFFF;
-+
-+static int gw_avila_pcm_new(struct snd_soc_pcm_runtime *rtd)
-+{
-+ struct snd_card *card = rtd->card->snd_card;
-+ struct snd_pcm *pcm = rtd->pcm;
-+ struct snd_soc_dai *dai = rtd->codec_dai;
-+ int ret;
-+
-+ if (!card->dev->dma_mask)
-+ card->dev->dma_mask = &gw_avila_pcm_dmamask;
-+ if (!card->dev->coherent_dma_mask)
-+ card->dev->coherent_dma_mask = 0xFFFFFFFF;
-+
-+ if (dai->driver->playback.channels_min) {
-+ ret = gw_avila_pcm_preallocate_dma_buffer(pcm,
-+ SNDRV_PCM_STREAM_PLAYBACK);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ if (dai->driver->capture.channels_min) {
-+ ret = gw_avila_pcm_preallocate_dma_buffer(pcm,
-+ SNDRV_PCM_STREAM_CAPTURE);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+struct snd_soc_platform_driver gw_avila_soc_platform = {
-+ .ops = &gw_avila_pcm_ops,
-+ .pcm_new = gw_avila_pcm_new,
-+ .pcm_free = gw_avila_pcm_free,
-+};
-+
-+static int gw_avila_pcm_platform_probe(struct platform_device *pdev)
-+{
-+ return snd_soc_register_platform(&pdev->dev, &gw_avila_soc_platform);
-+}
-+
-+static int gw_avila_pcm_platform_remove(struct platform_device *pdev)
-+{
-+ snd_soc_unregister_platform(&pdev->dev);
-+ return 0;
-+}
-+
-+static struct platform_driver gw_avila_pcm_driver = {
-+ .driver = {
-+ .name = "gw_avila-audio",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = gw_avila_pcm_platform_probe,
-+ .remove = gw_avila_pcm_platform_remove,
-+};
-+
-+static int __init gw_avila_soc_platform_init(void)
-+{
-+ return platform_driver_register(&gw_avila_pcm_driver);
-+}
-+module_init(gw_avila_soc_platform_init);
-+
-+static void __exit gw_avila_soc_platform_exit(void)
-+{
-+ platform_driver_unregister(&gw_avila_pcm_driver);
-+}
-+module_exit(gw_avila_soc_platform_exit);
-+
-+MODULE_AUTHOR("Chris Lang");
-+MODULE_DESCRIPTION("Gateworks Avila PCM DMA module");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila-pcm.h
-@@ -0,0 +1,32 @@
-+/*
-+ * ALSA PCM interface for the Gateworks Avila platform
-+ *
-+ * Author: Chris Lang, <clang at gateworks.com>
-+ * Copyright: (C) 2009 Gateworks Corporation
-+ *
-+ * Based On: davinci-evm.c, Author: Vladimir Barinov, <vbarinov at ru.mvista.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _GW_AVILA_PCM_H
-+#define _GW_AVILA_PCM_H
-+
-+#if 0
-+struct gw_avila_pcm_dma_params {
-+ char *name; /* stream identifier */
-+ int channel; /* sync dma channel ID */
-+ dma_addr_t dma_addr; /* device physical address for DMA */
-+ unsigned int data_type; /* xfer data type */
-+};
-+
-+struct gw_avila_snd_platform_data {
-+ int tx_dma_ch; // XXX Do we need this?
-+ int rx_dma_ch; // XXX Do we need this
-+};
-+extern struct snd_soc_platform gw_avila_soc_platform[];
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila.c
-@@ -0,0 +1,244 @@
-+/*
-+ * File: sound/soc/gw-avila/gw_avila.c
-+ * Author: Chris Lang <clang at gateworks.com>
-+ *
-+ * Created: Tue June 06 2008
-+ * Description: Board driver for Gateworks Avila
-+ *
-+ * Modified:
-+ * Copyright 2009 Gateworks Corporation
-+ *
-+ * Bugs: What Bugs?
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, see the file COPYING, or write
-+ * to the Free Software Foundation, Inc.,
-+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/device.h>
-+#include <asm/dma.h>
-+#include <linux/platform_device.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/soc.h>
-+#include <linux/slab.h>
-+#include <linux/gpio.h>
-+
-+#include "ixp4xx_hss.h"
-+#include "gw-avila-hss.h"
-+#include "gw-avila-pcm.h"
-+
-+#define CODEC_FREQ 33333000
-+
-+static int gw_avila_board_startup(struct snd_pcm_substream *substream)
-+{
-+ pr_debug("%s enter\n", __func__);
-+ return 0;
-+}
-+
-+static int gw_avila_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *params)
-+{
-+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
-+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-+
-+ int ret = 0;
-+
-+ /* set codec DAI configuration */
-+ if (cpu_dai->id % 2) {
-+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBS_CFS);
-+ snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 1, 32);
-+ } else {
-+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBM_CFM);
-+ snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 0, 32);
-+ }
-+
-+ if (ret < 0)
-+ return ret;
-+
-+ /* set the codec system clock */
-+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_FREQ, SND_SOC_CLOCK_OUT);
-+ if (ret < 0)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
-+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
-+ SND_SOC_DAPM_LINE("Line Out", NULL),
-+ SND_SOC_DAPM_LINE("Line In", NULL),
-+};
-+
-+static const struct snd_soc_dapm_route audio_map[] = {
-+ {"Headphone Jack", NULL, "HPLOUT"},
-+ {"Headphone Jack", NULL, "HPROUT"},
-+
-+ /* Line Out connected to LLOUT, RLOUT */
-+ {"Line Out", NULL, "LLOUT"},
-+ {"Line Out", NULL, "RLOUT"},
-+
-+ /* Line In connected to (LINE1L | LINE2L), (LINE1R | LINE2R) */
-+ {"LINE1L", NULL, "Line In"},
-+ {"LINE1R", NULL, "Line In"},
-+};
-+
-+/* Logic for a aic3x as connected on a davinci-evm */
-+static int avila_aic3x_init(struct snd_soc_pcm_runtime *rtd)
-+{
-+ struct snd_soc_codec *codec = rtd->codec;
-+ struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
-+
-+ /* Add davinci-evm specific widgets */
-+ snd_soc_dapm_new_controls(dapm, aic3x_dapm_widgets,
-+ ARRAY_SIZE(aic3x_dapm_widgets));
-+
-+ /* Set up davinci-evm specific audio path audio_map */
-+ snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-+
-+ /* not connected */
-+ snd_soc_dapm_disable_pin(dapm, "MONO_LOUT");
-+ //snd_soc_dapm_disable_pin(dapm, "HPLCOM");
-+ //snd_soc_dapm_disable_pin(dapm, "HPRCOM");
-+ snd_soc_dapm_disable_pin(dapm, "MIC3L");
-+ snd_soc_dapm_disable_pin(dapm, "MIC3R");
-+ snd_soc_dapm_disable_pin(dapm, "LINE2L");
-+ snd_soc_dapm_disable_pin(dapm, "LINE2R");
-+
-+ /* always connected */
-+ snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
-+ snd_soc_dapm_enable_pin(dapm, "Line Out");
-+ snd_soc_dapm_enable_pin(dapm, "Line In");
-+
-+ snd_soc_dapm_sync(dapm);
-+
-+ return 0;
-+}
-+
-+static struct snd_soc_ops gw_avila_board_ops = {
-+ .startup = gw_avila_board_startup,
-+ .hw_params = gw_avila_hw_params,
-+};
-+
-+static struct snd_soc_dai_link gw_avila_board_dai[] = {
-+ {
-+ .name = "HSS-0",
-+ .stream_name = "HSS-0",
-+ .cpu_dai_name = "gw_avila_hss.0",
-+ .codec_dai_name = "tlv320aic3x-hifi",
-+ .codec_name = "tlv320aic3x-codec.0-001b",
-+ .platform_name = "gw_avila-audio.0",
-+ .init = avila_aic3x_init,
-+ .ops = &gw_avila_board_ops,
-+ },{
-+ .name = "HSS-1",
-+ .stream_name = "HSS-1",
-+ .cpu_dai_name = "gw_avila_hss.1",
-+ .codec_dai_name = "tlv320aic3x-hifi",
-+ .codec_name = "tlv320aic3x-codec.0-001a",
-+ .platform_name = "gw_avila-audio.1",
-+ .init = avila_aic3x_init,
-+ .ops = &gw_avila_board_ops,
-+ },{
-+ .name = "HSS-2",
-+ .stream_name = "HSS-2",
-+ .cpu_dai_name = "gw_avila_hss.2",
-+ .codec_dai_name = "tlv320aic3x-hifi",
-+ .codec_name = "tlv320aic3x-codec.0-0019",
-+ .platform_name = "gw_avila-audio.2",
-+ .init = avila_aic3x_init,
-+ .ops = &gw_avila_board_ops,
-+ },{
-+ .name = "HSS-3",
-+ .stream_name = "HSS-3",
-+ .cpu_dai_name = "gw_avila_hss.3",
-+ .codec_dai_name = "tlv320aic3x-hifi",
-+ .codec_name = "tlv320aic3x-codec.0-0018",
-+ .platform_name = "gw_avila-audio.3",
-+ .init = avila_aic3x_init,
-+ .ops = &gw_avila_board_ops,
-+ },
-+};
-+
-+static struct snd_soc_card gw_avila_board[] = {
-+ {
-+ .name = "gw_avila-board.0",
-+ .owner = THIS_MODULE,
-+ .dai_link = &gw_avila_board_dai[0],
-+ .num_links = 1,
-+ },{
-+ .name = "gw_avila-board.1",
-+ .owner = THIS_MODULE,
-+ .dai_link = &gw_avila_board_dai[1],
-+ .num_links = 1,
-+ },{
-+ .name = "gw_avila-board.2",
-+ .owner = THIS_MODULE,
-+ .dai_link = &gw_avila_board_dai[2],
-+ .num_links = 1,
-+ },{
-+ .name = "gw_avila-board.3",
-+ .owner = THIS_MODULE,
-+ .dai_link = &gw_avila_board_dai[3],
-+ .num_links = 1,
-+ }
-+};
-+
-+static struct platform_device *gw_avila_board_snd_device[4];
-+
-+static int __init gw_avila_board_init(void)
-+{
-+ int ret;
-+ struct port *port;
-+ int i;
-+
-+ if ((hss_port[0] = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
-+ return -ENOMEM;
-+
-+ if ((hss_port[1] = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < 4; i++) {
-+ gw_avila_board_snd_device[i] = platform_device_alloc("soc-audio", i);
-+ if (!gw_avila_board_snd_device[i]) {
-+ return -ENOMEM;
-+ }
-+
-+ platform_set_drvdata(gw_avila_board_snd_device[i], &gw_avila_board[i]);
-+ ret = platform_device_add(gw_avila_board_snd_device[i]);
-+
-+ if (ret) {
-+ platform_device_put(gw_avila_board_snd_device[i]);
-+ }
-+ }
-+ return ret;
-+}
-+
-+static void __exit gw_avila_board_exit(void)
-+{
-+ int i;
-+ for (i = 0; i < 4; i++)
-+ platform_device_unregister(gw_avila_board_snd_device[i]);
-+}
-+
-+module_init(gw_avila_board_init);
-+module_exit(gw_avila_board_exit);
-+
-+/* Module information */
-+MODULE_AUTHOR("Chris Lang");
-+MODULE_DESCRIPTION("ALSA SoC HSS Audio gw_avila board");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/sound/soc/gw-avila/ixp4xx_hss.c
-@@ -0,0 +1,902 @@
-+/*
-+ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
-+ *
-+ * Copyright (C) 2009 Chris Lang <clang at gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/bitops.h>
-+#include <linux/cdev.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/fs.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/poll.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+
-+#include <mach/npe.h>
-+#include <mach/qmgr.h>
-+
-+#include "ixp4xx_hss.h"
-+
-+/*****************************************************************************
-+ * global variables
-+ ****************************************************************************/
-+
-+void hss_chan_read(unsigned long data);
-+static char lock_init = 0;
-+static spinlock_t npe_lock;
-+static struct npe *npe;
-+
-+static const struct {
-+ int tx, txdone, rx, rxfree, chan;
-+}queue_ids[2] = {{HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE, HSS0_PKT_RX_QUEUE,
-+ HSS0_PKT_RXFREE0_QUEUE, HSS0_CHL_RXTRIG_QUEUE},
-+ {HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE, HSS1_PKT_RX_QUEUE,
-+ HSS1_PKT_RXFREE0_QUEUE, HSS1_CHL_RXTRIG_QUEUE},
-+};
-+
-+struct port *hss_port[2];
-+struct hss_device *hss_handle[32];
-+EXPORT_SYMBOL(hss_handle);
-+
-+/*****************************************************************************
-+ * utility functions
-+ ****************************************************************************/
-+
-+#ifndef __ARMEB__
-+static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
-+{
-+ int i;
-+ for (i = 0; i < cnt; i++)
-+ dest[i] = swab32(src[i]);
-+}
-+#endif
-+
-+static inline unsigned int sub_offset(unsigned int a, unsigned int b,
-+ unsigned int modulo)
-+{
-+ return (modulo /* make sure the result >= 0 */ + a - b) % modulo;
-+}
-+
-+/*****************************************************************************
-+ * HSS access
-+ ****************************************************************************/
-+
-+static void hss_config_load(struct port *port)
-+{
-+ struct msg msg;
-+
-+ do {
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_LOAD;
-+ msg.hss_port = port->id;
-+ if (npe_send_message(npe, &msg, "HSS_LOAD_CONFIG"))
-+ break;
-+ if (npe_recv_message(npe, &msg, "HSS_LOAD_CONFIG"))
-+ break;
-+
-+ /* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
-+ if (msg.cmd != PORT_CONFIG_LOAD || msg.data32)
-+ break;
-+
-+ /* HDLC may stop working without this */
-+ npe_recv_message(npe, &msg, "FLUSH_IT");
-+ return;
-+ } while (0);
-+
-+ printk(KERN_CRIT "HSS-%i: unable to reload HSS configuration\n",
-+ port->id);
-+ BUG();
-+}
-+
-+static void hss_config_set_pcr(struct port *port)
-+{
-+ struct msg msg;
-+
-+ do {
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.index = HSS_CONFIG_TX_PCR;
-+#if 0
-+ msg.data32 = PCR_FRM_SYNC_RISINGEDGE | PCR_MSB_ENDIAN |
-+ PCR_TX_DATA_ENABLE | PCR_TX_UNASS_HIGH_IMP | PCR_TX_V56K_HIGH_IMP | PCR_TX_FB_HIGH_IMP;
-+#else
-+ msg.data32 = PCR_FRM_SYNC_RISINGEDGE | PCR_MSB_ENDIAN |
-+ PCR_TX_DATA_ENABLE | PCR_TX_FB_HIGH_IMP | PCR_DCLK_EDGE_RISING;
-+#endif
-+ if (port->frame_size % 8 == 0)
-+ msg.data32 |= PCR_SOF_NO_FBIT;
-+
-+ if (npe_send_message(npe, &msg, "HSS_SET_TX_PCR"))
-+ break;
-+
-+ msg.index = HSS_CONFIG_RX_PCR;
-+ msg.data32 &= ~ (PCR_DCLK_EDGE_RISING | PCR_FCLK_EDGE_RISING | PCR_TX_DATA_ENABLE);
-+
-+ if (npe_send_message(npe, &msg, "HSS_SET_RX_PCR"))
-+ break;
-+ return;
-+ } while (0);
-+
-+ printk(KERN_CRIT "HSS-%i: unable to set HSS PCR registers\n", port->id);
-+ BUG();
-+}
-+
-+static void hss_config_set_core(struct port *port)
-+{
-+ struct msg msg;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.index = HSS_CONFIG_CORE_CR;
-+#if 0
-+ msg.data32 = 0 | CCR_LOOPBACK |
-+ (port->id ? CCR_SECOND_HSS : 0);
-+#else
-+ msg.data32 = 0 |
-+ (port->id ? CCR_SECOND_HSS : 0);
-+#endif
-+ if (npe_send_message(npe, &msg, "HSS_SET_CORE_CR")) {
-+ printk(KERN_CRIT "HSS-%i: unable to set HSS core control"
-+ " register\n", port->id);
-+ BUG();
-+ }
-+}
-+
-+static void hss_config_set_line(struct port *port)
-+{
-+ struct msg msg;
-+
-+ hss_config_set_pcr(port);
-+ hss_config_set_core(port);
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.index = HSS_CONFIG_CLOCK_CR;
-+ msg.data32 = CLK42X_SPEED_8192KHZ /* FIXME */;
-+ if (npe_send_message(npe, &msg, "HSS_SET_CLOCK_CR")) {
-+ printk(KERN_CRIT "HSS-%i: unable to set HSS clock control"
-+ " register\n", port->id);
-+ BUG();
-+ }
-+}
-+
-+static void hss_config_set_rx_frame(struct port *port)
-+{
-+ struct msg msg;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.index = HSS_CONFIG_RX_FCR;
-+ msg.data16a = port->frame_sync_offset;
-+ msg.data16b = port->frame_size - 1;
-+ if (npe_send_message(npe, &msg, "HSS_SET_RX_FCR")) {
-+ printk(KERN_CRIT "HSS-%i: unable to set HSS RX frame size"
-+ " and offset\n", port->id);
-+ BUG();
-+ }
-+}
-+
-+static void hss_config_set_frame(struct port *port)
-+{
-+ struct msg msg;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.index = HSS_CONFIG_TX_FCR;
-+ msg.data16a = TX_FRAME_SYNC_OFFSET;
-+ msg.data16b = port->frame_size - 1;
-+ if (npe_send_message(npe, &msg, "HSS_SET_TX_FCR")) {
-+ printk(KERN_CRIT "HSS-%i: unable to set HSS TX frame size"
-+ " and offset\n", port->id);
-+ BUG();
-+ }
-+ hss_config_set_rx_frame(port);
-+}
-+
-+static void hss_config_set_lut(struct port *port)
-+{
-+ struct msg msg;
-+ int chan_count = 32;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+
-+ msg.index = HSS_CONFIG_TX_LUT;
-+ msg.data32 = 0xffffffff;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.data32 = 0x0;
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+
-+ msg.index = HSS_CONFIG_RX_LUT;
-+ msg.data32 = 0xffffffff;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.data32 = 0x0;
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+
-+ hss_config_set_frame(port);
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_NUM_CHANS_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = chan_count;
-+ if (npe_send_message(npe, &msg, "CHAN_NUM_CHANS_WRITE")) {
-+ printk(KERN_CRIT "HSS-%i: unable to set HSS channel count\n",
-+ port->id);
-+ BUG();
-+ }
-+}
-+
-+static u32 hss_config_get_status(struct port *port)
-+{
-+ struct msg msg;
-+
-+ do {
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_ERROR_READ;
-+ msg.hss_port = port->id;
-+ if (npe_send_message(npe, &msg, "PORT_ERROR_READ"))
-+ break;
-+ if (npe_recv_message(npe, &msg, "PORT_ERROR_READ"))
-+ break;
-+
-+ return msg.data32;
-+ } while (0);
-+
-+ printk(KERN_CRIT "HSS-%i: unable to read HSS status\n", port->id);
-+ BUG();
-+}
-+
-+static void hss_config_start_chan(struct port *port)
-+{
-+ struct msg msg;
-+
-+ port->chan_last_tx = 0;
-+ port->chan_last_rx = 0;
-+
-+ do {
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_RX_BUF_ADDR_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data32 = port->chan_rx_buf_phys;
-+ if (npe_send_message(npe, &msg, "CHAN_RX_BUF_ADDR_WRITE"))
-+ break;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_TX_BUF_ADDR_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data32 = port->chan_tx_pointers_phys;
-+ if (npe_send_message(npe, &msg, "CHAN_TX_BUF_ADDR_WRITE"))
-+ break;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_FLOW_ENABLE;
-+ msg.hss_port = port->id;
-+ if (npe_send_message(npe, &msg, "CHAN_FLOW_ENABLE"))
-+ break;
-+ port->chan_started = 1;
-+ return;
-+ } while (0);
-+
-+ printk(KERN_CRIT "HSS-%i: unable to start channelized flow\n",
-+ port->id);
-+ BUG();
-+}
-+
-+static void hss_config_stop_chan(struct port *port)
-+{
-+ struct msg msg;
-+
-+ if (!port->chan_started)
-+ return;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_FLOW_DISABLE;
-+ msg.hss_port = port->id;
-+ if (npe_send_message(npe, &msg, "CHAN_FLOW_DISABLE")) {
-+ printk(KERN_CRIT "HSS-%i: unable to stop channelized flow\n",
-+ port->id);
-+ BUG();
-+ }
-+ hss_config_get_status(port); /* make sure it's halted */
-+ port->chan_started = 0;
-+}
-+
-+static int hss_config_load_firmware(struct port *port)
-+{
-+ struct msg msg;
-+
-+ if (port->initialized)
-+ return 0;
-+
-+ if (!npe_running(npe)) {
-+ int err;
-+ if ((err = npe_load_firmware(npe, "NPE-A-HSS",
-+ port->dev)))
-+ return err;
-+ }
-+
-+ do {
-+ /* HSS main configuration */
-+ hss_config_set_line(port);
-+
-+ hss_config_set_frame(port);
-+
-+ /* Channelized operation settings */
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_TX_BLK_CFG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8b = (CHAN_TX_LIST_FRAMES & ~7) / 2;
-+ msg.data8a = msg.data8b / 4;
-+ msg.data8d = CHAN_TX_LIST_FRAMES - msg.data8b;
-+ msg.data8c = msg.data8d / 4;
-+ if (npe_send_message(npe, &msg, "CHAN_TX_BLK_CFG_WRITE"))
-+ break;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_RX_BUF_CFG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = CHAN_RX_TRIGGER / 8;
-+ msg.data8b = CHAN_RX_FRAMES;
-+ if (npe_send_message(npe, &msg, "CHAN_RX_BUF_CFG_WRITE"))
-+ break;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_TX_BUF_SIZE_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = CHAN_TX_LISTS;
-+ if (npe_send_message(npe, &msg, "CHAN_TX_BUF_SIZE_WRITE"))
-+ break;
-+
-+ port->initialized = 1;
-+ return 0;
-+ } while (0);
-+
-+ printk(KERN_CRIT "HSS-%i: unable to start HSS operation\n", port->id);
-+ BUG();
-+}
-+
-+void hss_chan_irq(void *pdev)
-+{
-+ struct port *port = pdev;
-+
-+ qmgr_disable_irq(queue_ids[port->id].chan);
-+
-+ tasklet_hi_schedule(&port->task);
-+}
-+
-+
-+int hss_prepare_chan(struct port *port)
-+{
-+ int err, i, j;
-+ u32 *temp;
-+ u32 temp2;
-+ u8 *temp3;
-+
-+ if (port->initialized)
-+ return 0;
-+
-+ if ((err = hss_config_load_firmware(port)))
-+ return err;
-+
-+ if ((err = qmgr_request_queue(queue_ids[port->id].chan,
-+ CHAN_QUEUE_LEN, 0, 0, "%s:hss", "hss")))
-+ return err;
-+
-+ port->chan_tx_buf = dma_alloc_coherent(port->dev, chan_tx_buf_len(port), &port->chan_tx_buf_phys, GFP_DMA);
-+ memset(port->chan_tx_buf, 0, chan_tx_buf_len(port));
-+
-+ port->chan_tx_pointers = dma_alloc_coherent(port->dev, chan_tx_buf_len(port) / CHAN_TX_LIST_FRAMES * 4, &port->chan_tx_pointers_phys, GFP_DMA);
-+
-+ temp3 = port->chan_tx_buf;
-+ for (i = 0; i < CHAN_TX_LISTS; i++) {
-+ for (j = 0; j < 8; j++) {
-+ port->tx_lists[i][j] = temp3;
-+ temp3 += CHAN_TX_LIST_FRAMES * 4;
-+ }
-+ }
-+
-+ temp = port->chan_tx_pointers;
-+ temp2 = port->chan_tx_buf_phys;
-+ for (i = 0; i < CHAN_TX_LISTS; i++)
-+ {
-+ for (j = 0; j < 32; j++)
-+ {
-+ *temp = temp2;
-+ temp2 += CHAN_TX_LIST_FRAMES;
-+ temp++;
-+ }
-+ }
-+
-+ port->chan_rx_buf = dma_alloc_coherent(port->dev, chan_rx_buf_len(port), &port->chan_rx_buf_phys, GFP_DMA);
-+
-+ for (i = 0; i < 8; i++) {
-+ temp3 = port->chan_rx_buf + (i * 4 * 128);
-+ for (j = 0; j < 8; j++) {
-+ port->rx_frames[i][j] = temp3;
-+ temp3 += CHAN_RX_TRIGGER;
-+ }
-+ }
-+
-+ qmgr_set_irq(queue_ids[port->id].chan, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ hss_chan_irq, port);
-+
-+ return 0;
-+
-+}
-+
-+int hss_tx_start(struct hss_device *hdev)
-+{
-+ unsigned long flags;
-+ struct port *port = hdev->port;
-+
-+ hdev->tx_loc = 0;
-+ hdev->tx_frame = 0;
-+
-+ set_bit((1 << hdev->id), &port->chan_tx_bitmap);
-+
-+ if (!port->chan_started)
-+ {
-+ qmgr_enable_irq(queue_ids[port->id].chan);
-+ spin_lock_irqsave(&npe_lock, flags);
-+ hss_config_start_chan(port);
-+ spin_unlock_irqrestore(&npe_lock, flags);
-+ hss_chan_irq(port);
-+ }
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_tx_start);
-+
-+int hss_rx_start(struct hss_device *hdev)
-+{
-+ unsigned long flags;
-+ struct port *port = hdev->port;
-+
-+ hdev->rx_loc = 0;
-+ hdev->rx_frame = 0;
-+
-+ set_bit((1 << hdev->id), &port->chan_rx_bitmap);
-+
-+ if (!port->chan_started)
-+ {
-+ qmgr_enable_irq(queue_ids[port->id].chan);
-+ spin_lock_irqsave(&npe_lock, flags);
-+ hss_config_start_chan(port);
-+ spin_unlock_irqrestore(&npe_lock, flags);
-+ hss_chan_irq(port);
-+ }
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_rx_start);
-+
-+int hss_tx_stop(struct hss_device *hdev)
-+{
-+ struct port *port = hdev->port;
-+
-+ clear_bit((1 << hdev->id), &port->chan_tx_bitmap);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_tx_stop);
-+
-+int hss_rx_stop(struct hss_device *hdev)
-+{
-+ struct port *port = hdev->port;
-+
-+ clear_bit((1 << hdev->id), &port->chan_rx_bitmap);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_rx_stop);
-+
-+int hss_chan_open(struct hss_device *hdev)
-+{
-+ struct port *port = hdev->port;
-+ int i, err = 0;
-+
-+ if (port->chan_open)
-+ return 0;
-+
-+ if (port->mode == MODE_HDLC) {
-+ err = -ENOSYS;
-+ goto out;
-+ }
-+
-+ if (port->mode == MODE_G704 && port->channels[0] == hdev->id) {
-+ err = -EBUSY; /* channel #0 is used for G.704 signaling */
-+ goto out;
-+ }
-+
-+ for (i = MAX_CHANNELS; i > port->frame_size / 8; i--)
-+ if (port->channels[i - 1] == hdev->id) {
-+ err = -ECHRNG; /* frame too short */
-+ goto out;
-+ }
-+
-+ hdev->rx_loc = hdev->tx_loc = 0;
-+ hdev->rx_frame = hdev->tx_frame = 0;
-+
-+ //clear_bit((1 << hdev->id), &port->chan_rx_bitmap);
-+ //clear_bit((1 << hdev->id), &port->chan_tx_bitmap);
-+
-+ if (!port->initialized) {
-+ hss_prepare_chan(port);
-+
-+ hss_config_stop_chan(port);
-+ hdev->open_count++;
-+ port->chan_open_count++;
-+
-+ hss_config_set_lut(port);
-+ hss_config_load(port);
-+
-+ }
-+ port->chan_open = 1;
-+
-+out:
-+ return err;
-+}
-+EXPORT_SYMBOL(hss_chan_open);
-+
-+int hss_chan_close(struct hss_device *hdev)
-+{
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_chan_close);
-+
-+void hss_chan_read(unsigned long data)
-+{
-+ struct port *port = (void *)data;
-+ struct hss_device *hdev;
-+ u8 *hw_buf, *save_buf;
-+ u8 *buf;
-+ u32 v;
-+ unsigned int tx_list, rx_frame;
-+ int i, j, channel;
-+ u8 more_work = 0;
-+
-+/*
-+ My Data in the hardware buffer is scattered by channels into 4 trunks
-+ as follows for rx
-+
-+ channel 0 channel 1 channel 2 channel 3
-+Trunk 1 = 0 -> 127 128 -> 255 256 -> 383 384 -> 512
-+Trunk 2 = 513 -> 639 640 -> 768 769 -> 895 896 -> 1023
-+Trunk 3 = 1024 -> 1151 1152 -> 1207 1208 -> 1407 1408 -> 1535
-+Trunk 4 = 1535 -> 1663 1664 -> 1791 1792 -> 1920 1921 -> 2047
-+
-+ I will get CHAN_RX_TRIGGER worth of bytes out of each channel on each trunk
-+ with each IRQ
-+
-+ For TX Data, it is split into 8 lists with each list containing 16 bytes per
-+ channel
-+
-+Trunk 1 = 0 -> 16 17 -> 32 33 -> 48 49 -> 64
-+Trunk 2 = 65 -> 80 81 -> 96 97 -> 112 113 -> 128
-+Trunk 3 = 129 -> 144 145 -> 160 161 -> 176 177 -> 192
-+Trunk 4 = 193 -> 208 209 -> 224 225 -> 240 241 -> 256
-+
-+*/
-+
-+
-+ while ((v = qmgr_get_entry(queue_ids[port->id].chan)))
-+ {
-+ tx_list = (v >> 8) & 0xFF;
-+ rx_frame = v & 0xFF;
-+
-+ if (tx_list == 7)
-+ tx_list = 0;
-+ else
-+ tx_list++;
-+ for (channel = 0; channel < 8; channel++) {
-+
-+ hdev = port->chan_devices[channel];
-+ if (!hdev)
-+ continue;
-+
-+ if (test_bit(1 << channel, &port->chan_tx_bitmap)) {
-+ buf = (u8 *)hdev->tx_buf + hdev->tx_loc;
-+#if 0
-+ hw_buf = (u8 *)port->chan_tx_buf;
-+ hw_buf += (tx_list * CHAN_TX_LIST_FRAMES * 32);
-+ hw_buf += (4 * CHAN_TX_LIST_FRAMES * channel);
-+ save_buf = hw_buf;
-+#else
-+ save_buf = port->tx_lists[tx_list][channel];
-+#endif
-+ for (i = 0; i < CHAN_TX_LIST_FRAMES; i++) {
-+ hw_buf = save_buf + i;
-+ for (j = 0; j < 4; j++) {
-+ *hw_buf = *(buf++);
-+ hw_buf += CHAN_TX_LIST_FRAMES;
-+ }
-+
-+ hdev->tx_loc += 4;
-+ hdev->tx_frame++;
-+ if (hdev->tx_loc >= hdev->tx_buffer_size) {
-+ hdev->tx_loc = 0;
-+ buf = (u8 *)hdev->tx_buf;
-+ }
-+ }
-+ } else {
-+#if 0
-+ hw_buf = (u8 *)port->chan_tx_buf;
-+ hw_buf += (tx_list * CHAN_TX_LIST_FRAMES * 32);
-+ hw_buf += (4 * CHAN_TX_LIST_FRAMES * channel);
-+#else
-+ hw_buf = port->tx_lists[tx_list][channel];
-+#endif
-+ memset(hw_buf, 0, 64);
-+ }
-+
-+ if (hdev->tx_frame >= hdev->tx_period_size && test_bit(1 << channel, &port->chan_tx_bitmap))
-+ {
-+ hdev->tx_frame %= hdev->tx_period_size;
-+ if (hdev->tx_callback)
-+ hdev->tx_callback(hdev->tx_data);
-+ more_work = 1;
-+ }
-+
-+ if (test_bit(1 << channel, &port->chan_rx_bitmap)) {
-+ buf = (u8 *)hdev->rx_buf + hdev->rx_loc;
-+#if 0
-+ hw_buf = (u8 *)port->chan_rx_buf;
-+ hw_buf += (4 * CHAN_RX_FRAMES * channel);
-+ hw_buf += rx_frame;
-+ save_buf = hw_buf;
-+#else
-+ save_buf = port->rx_frames[channel][rx_frame >> 4];
-+#endif
-+ for (i = 0; i < CHAN_RX_TRIGGER; i++) {
-+ hw_buf = save_buf + i;
-+ for (j = 0; j < 4; j++) {
-+ *(buf++) = *hw_buf;
-+ hw_buf += CHAN_RX_FRAMES;
-+ }
-+ hdev->rx_loc += 4;
-+ hdev->rx_frame++;
-+ if (hdev->rx_loc >= hdev->rx_buffer_size) {
-+ hdev->rx_loc = 0;
-+ buf = (u8 *)hdev->rx_buf;
-+ }
-+ }
-+ }
-+
-+ if (hdev->rx_frame >= hdev->rx_period_size && test_bit(1 << channel, &port->chan_rx_bitmap))
-+ {
-+ hdev->rx_frame %= hdev->rx_period_size;
-+ if (hdev->rx_callback)
-+ hdev->rx_callback(hdev->rx_data);
-+ more_work = 1;
-+ }
-+ }
-+#if 0
-+ if (more_work)
-+ {
-+ tasklet_hi_schedule(&port->task);
-+ return;
-+ }
-+#endif
-+ }
-+
-+ qmgr_enable_irq(queue_ids[port->id].chan);
-+
-+ return;
-+
-+}
-+
-+struct hss_device *hss_chan_create(struct port *port, unsigned int channel)
-+{
-+ struct hss_device *chan_dev;
-+ unsigned long flags;
-+
-+ chan_dev = kzalloc(sizeof(struct hss_device), GFP_KERNEL);
-+
-+ spin_lock_irqsave(&npe_lock, flags);
-+
-+ chan_dev->id = channel;
-+ chan_dev->port = port;
-+
-+ port->channels[channel] = channel;
-+
-+ port->chan_devices[channel] = chan_dev;
-+
-+ spin_unlock_irqrestore(&npe_lock, flags);
-+
-+ return chan_dev;
-+}
-+
-+/*****************************************************************************
-+ * initialization
-+ ****************************************************************************/
-+
-+static struct platform_device gw_avila_hss_device_0 = {
-+ .name = "ixp4xx_hss",
-+ .id = 0,
-+};
-+
-+static struct platform_device gw_avila_hss_device_1 = {
-+ .name = "ixp4xx_hss",
-+ .id = 1,
-+};
-+
-+static struct platform_device *gw_avila_hss_port_0;
-+static struct platform_device *gw_avila_hss_port_1;
-+static u64 hss_dmamask = 0xFFFFFFFF;
-+
-+struct hss_device *hss_init(int id, int channel)
-+{
-+ struct port *port = hss_port[id];
-+ struct hss_device *hdev;
-+ int ret;
-+
-+ if (!lock_init)
-+ {
-+ spin_lock_init(&npe_lock);
-+ lock_init = 1;
-+ npe = npe_request(0);
-+ }
-+
-+ if (!port->init) {
-+ if (id == 0) {
-+ gw_avila_hss_port_0 = platform_device_alloc("hss-port", 0);
-+
-+ platform_set_drvdata(gw_avila_hss_port_0, &gw_avila_hss_device_0);
-+ port->dev = &gw_avila_hss_port_0->dev;
-+
-+ if (!port->dev->dma_mask)
-+ port->dev->dma_mask = &hss_dmamask;
-+ if (!port->dev->coherent_dma_mask)
-+ port->dev->coherent_dma_mask = 0xFFFFFFFF;
-+
-+ ret = platform_device_add(gw_avila_hss_port_0);
-+
-+ if (ret)
-+ platform_device_put(gw_avila_hss_port_0);
-+
-+ tasklet_init(&port->task, hss_chan_read, (unsigned long) port);
-+ }
-+ else
-+ {
-+ gw_avila_hss_port_1 = platform_device_alloc("hss-port", 1);
-+
-+ platform_set_drvdata(gw_avila_hss_port_1, &gw_avila_hss_device_1);
-+ port->dev = &gw_avila_hss_port_1->dev;
-+
-+ if (!port->dev->dma_mask)
-+ port->dev->dma_mask = &hss_dmamask;
-+ if (!port->dev->coherent_dma_mask)
-+ port->dev->coherent_dma_mask = 0xFFFFFFFF;
-+
-+ ret = platform_device_add(gw_avila_hss_port_1);
-+
-+ if (ret)
-+ platform_device_put(gw_avila_hss_port_1);
-+
-+ tasklet_init(&port->task, hss_chan_read, (unsigned long) port);
-+ }
-+
-+ port->init = 1;
-+ port->id = id;
-+ port->clock_type = CLOCK_EXT;
-+ port->clock_rate = 8192000;
-+ port->frame_size = 256; /* E1 */
-+ port->mode = MODE_RAW;
-+ port->next_rx_frame = 0;
-+ memset(port->channels, CHANNEL_UNUSED, sizeof(port->channels));
-+ }
-+
-+ hdev = hss_chan_create(port, channel);
-+
-+ return hdev;
-+}
-+EXPORT_SYMBOL(hss_init);
-+
-+int hss_set_tx_callback(struct hss_device *hdev, void (*tx_callback)(void *), void *tx_data)
-+{
-+ BUG_ON(tx_callback == NULL);
-+ hdev->tx_callback = tx_callback;
-+ hdev->tx_data = tx_data;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_set_tx_callback);
-+
-+int hss_set_rx_callback(struct hss_device *hdev, void (*rx_callback)(void *), void *rx_data)
-+{
-+ BUG_ON(rx_callback == NULL);
-+ hdev->rx_callback = rx_callback;
-+ hdev->rx_data = rx_data;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_set_rx_callback);
-+
-+int hss_config_rx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size)
-+{
-+ /*
-+ * Period Size and Buffer Size are in Frames which are u32
-+ * We convert the u32 *buf to u8 in order to make channel reads
-+ * and rx_loc easier
-+ */
-+
-+ hdev->rx_buf = (u8 *)buf;
-+ hdev->rx_buffer_size = buffer_size << 2;
-+ hdev->rx_period_size = period_size;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_config_rx_dma);
-+
-+int hss_config_tx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size)
-+{
-+ /*
-+ * Period Size and Buffer Size are in Frames which are u32
-+ * We convert the u32 *buf to u8 in order to make channel reads
-+ * and rx_loc easier
-+ */
-+
-+ hdev->tx_buf = (u8 *)buf;
-+ hdev->tx_buffer_size = buffer_size << 2;
-+ hdev->tx_period_size = period_size;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_config_tx_dma);
-+
-+unsigned long hss_curr_offset_rx(struct hss_device *hdev)
-+{
-+ return hdev->rx_loc >> 2;
-+}
-+EXPORT_SYMBOL(hss_curr_offset_rx);
-+
-+unsigned long hss_curr_offset_tx(struct hss_device *hdev)
-+{
-+ return hdev->tx_loc >> 2;
-+}
-+EXPORT_SYMBOL(hss_curr_offset_tx);
-+
-+MODULE_AUTHOR("Chris Lang");
-+MODULE_DESCRIPTION("Intel IXP4xx HSS Audio driver");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/sound/soc/gw-avila/ixp4xx_hss.h
-@@ -0,0 +1,401 @@
-+/*
-+ *
-+ *
-+ * Copyright (C) 2009 Gateworks Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/bitops.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/fs.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/poll.h>
-+#include <mach/npe.h>
-+#include <mach/qmgr.h>
-+#include <linux/interrupt.h>
-+
-+//#include <linux/hdlc.h> XXX We aren't HDLC
-+
-+#define DEBUG_QUEUES 0
-+#define DEBUG_DESC 0
-+#define DEBUG_RX 0
-+#define DEBUG_TX 0
-+#define DEBUG_PKT_BYTES 0
-+#define DEBUG_CLOSE 0
-+#define DEBUG_FRAMER 0
-+
-+#define DRV_NAME "ixp4xx_hss"
-+
-+#define PKT_EXTRA_FLAGS 0 /* orig 1 */
-+#define TX_FRAME_SYNC_OFFSET 0 /* channelized */
-+#define PKT_NUM_PIPES 1 /* 1, 2 or 4 */
-+#define PKT_PIPE_FIFO_SIZEW 4 /* total 4 dwords per HSS */
-+
-+#define RX_DESCS 512 /* also length of all RX queues */
-+#define TX_DESCS 512 /* also length of all TX queues */
-+
-+//#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
-+#define RX_SIZE (HDLC_MAX_MRU + 4) /* NPE needs more space */
-+#define MAX_CLOSE_WAIT 1000 /* microseconds */
-+#define HSS_COUNT 2
-+#define MIN_FRAME_SIZE 16 /* bits */
-+#define MAX_FRAME_SIZE 257 /* 256 bits + framing bit */
-+#define MAX_CHANNELS (MAX_FRAME_SIZE / 8)
-+#define MAX_CHAN_DEVICES 32
-+#define CHANNEL_HDLC 0xFE
-+#define CHANNEL_UNUSED 0xFF
-+
-+#define NAPI_WEIGHT 16
-+#define CHAN_RX_TRIGGER 16 /* 8 RX frames = 1 ms @ E1 */
-+#define CHAN_RX_FRAMES 128
-+#define CHAN_RX_TRUNKS 1
-+#define MAX_CHAN_RX_BAD_SYNC (CHAN_RX_TRIGGER / 2 /* pairs */ - 3)
-+
-+#define CHAN_TX_LIST_FRAMES CHAN_RX_TRIGGER /* bytes/channel per list, 16 - 48 */
-+#define CHAN_TX_LISTS 8
-+#define CHAN_TX_TRUNKS CHAN_RX_TRUNKS
-+#define CHAN_TX_FRAMES (CHAN_TX_LIST_FRAMES * CHAN_TX_LISTS)
-+
-+#define CHAN_QUEUE_LEN 32 /* minimum possible */
-+
-+#define chan_rx_buf_len(port) (port->frame_size / 8 * CHAN_RX_FRAMES * CHAN_RX_TRUNKS)
-+#define chan_tx_buf_len(port) (port->frame_size / 8 * CHAN_TX_FRAMES * CHAN_TX_TRUNKS)
-+
-+/* Queue IDs */
-+#define HSS0_CHL_RXTRIG_QUEUE 12 /* orig size = 32 dwords */
-+#define HSS0_PKT_RX_QUEUE 13 /* orig size = 32 dwords */
-+#define HSS0_PKT_TX0_QUEUE 14 /* orig size = 16 dwords */
-+#define HSS0_PKT_TX1_QUEUE 15
-+#define HSS0_PKT_TX2_QUEUE 16
-+#define HSS0_PKT_TX3_QUEUE 17
-+#define HSS0_PKT_RXFREE0_QUEUE 18 /* orig size = 16 dwords */
-+#define HSS0_PKT_RXFREE1_QUEUE 19
-+#define HSS0_PKT_RXFREE2_QUEUE 20
-+#define HSS0_PKT_RXFREE3_QUEUE 21
-+#define HSS0_PKT_TXDONE_QUEUE 22 /* orig size = 64 dwords */
-+
-+#define HSS1_CHL_RXTRIG_QUEUE 10
-+#define HSS1_PKT_RX_QUEUE 0
-+#define HSS1_PKT_TX0_QUEUE 5
-+#define HSS1_PKT_TX1_QUEUE 6
-+#define HSS1_PKT_TX2_QUEUE 7
-+#define HSS1_PKT_TX3_QUEUE 8
-+#define HSS1_PKT_RXFREE0_QUEUE 1
-+#define HSS1_PKT_RXFREE1_QUEUE 2
-+#define HSS1_PKT_RXFREE2_QUEUE 3
-+#define HSS1_PKT_RXFREE3_QUEUE 4
-+#define HSS1_PKT_TXDONE_QUEUE 9
-+
-+#define NPE_PKT_MODE_HDLC 0
-+#define NPE_PKT_MODE_RAW 1
-+#define NPE_PKT_MODE_56KMODE 2
-+#define NPE_PKT_MODE_56KENDIAN_MSB 4
-+
-+/* PKT_PIPE_HDLC_CFG_WRITE flags */
-+#define PKT_HDLC_IDLE_ONES 0x1 /* default = flags */
-+#define PKT_HDLC_CRC_32 0x2 /* default = CRC-16 */
-+#define PKT_HDLC_MSB_ENDIAN 0x4 /* default = LE */
-+
-+
-+/* hss_config, PCRs */
-+/* Frame sync sampling, default = active low */
-+#define PCR_FRM_SYNC_ACTIVE_HIGH 0x40000000
-+#define PCR_FRM_SYNC_FALLINGEDGE 0x80000000
-+#define PCR_FRM_SYNC_RISINGEDGE 0xC0000000
-+
-+/* Frame sync pin: input (default) or output generated off a given clk edge */
-+#define PCR_FRM_SYNC_OUTPUT_FALLING 0x20000000
-+#define PCR_FRM_SYNC_OUTPUT_RISING 0x30000000
-+
-+/* Frame and data clock sampling on edge, default = falling */
-+#define PCR_FCLK_EDGE_RISING 0x08000000
-+#define PCR_DCLK_EDGE_RISING 0x04000000
-+
-+/* Clock direction, default = input */
-+#define PCR_SYNC_CLK_DIR_OUTPUT 0x02000000
-+
-+/* Generate/Receive frame pulses, default = enabled */
-+#define PCR_FRM_PULSE_DISABLED 0x01000000
-+
-+ /* Data rate is full (default) or half the configured clk speed */
-+#define PCR_HALF_CLK_RATE 0x00200000
-+
-+/* Invert data between NPE and HSS FIFOs? (default = no) */
-+#define PCR_DATA_POLARITY_INVERT 0x00100000
-+
-+/* TX/RX endianness, default = LSB */
-+#define PCR_MSB_ENDIAN 0x00080000
-+
-+/* Normal (default) / open drain mode (TX only) */
-+#define PCR_TX_PINS_OPEN_DRAIN 0x00040000
-+
-+/* No framing bit transmitted and expected on RX? (default = framing bit) */
-+#define PCR_SOF_NO_FBIT 0x00020000
-+
-+/* Drive data pins? */
-+#define PCR_TX_DATA_ENABLE 0x00010000
-+
-+/* Voice 56k type: drive the data pins low (default), high, high Z */
-+#define PCR_TX_V56K_HIGH 0x00002000
-+#define PCR_TX_V56K_HIGH_IMP 0x00004000
-+
-+/* Unassigned type: drive the data pins low (default), high, high Z */
-+#define PCR_TX_UNASS_HIGH 0x00000800
-+#define PCR_TX_UNASS_HIGH_IMP 0x00001000
-+
-+/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
-+#define PCR_TX_FB_HIGH_IMP 0x00000400
-+
-+/* 56k data endiannes - which bit unused: high (default) or low */
-+#define PCR_TX_56KE_BIT_0_UNUSED 0x00000200
-+
-+/* 56k data transmission type: 32/8 bit data (default) or 56K data */
-+#define PCR_TX_56KS_56K_DATA 0x00000100
-+
-+/* hss_config, cCR */
-+/* Number of packetized clients, default = 1 */
-+#define CCR_NPE_HFIFO_2_HDLC 0x04000000
-+#define CCR_NPE_HFIFO_3_OR_4HDLC 0x08000000
-+
-+/* default = no loopback */
-+#define CCR_LOOPBACK 0x02000000
-+
-+/* HSS number, default = 0 (first) */
-+#define CCR_SECOND_HSS 0x01000000
-+
-+
-+/* hss_config, clkCR: main:10, num:10, denom:12 */
-+#define CLK42X_SPEED_EXP ((0x3FF << 22) | ( 2 << 12) | 15) /*65 KHz*/
-+
-+#define CLK42X_SPEED_512KHZ (( 130 << 22) | ( 2 << 12) | 15)
-+#define CLK42X_SPEED_1536KHZ (( 43 << 22) | ( 18 << 12) | 47)
-+#define CLK42X_SPEED_1544KHZ (( 43 << 22) | ( 33 << 12) | 192)
-+#define CLK42X_SPEED_2048KHZ (( 32 << 22) | ( 34 << 12) | 63)
-+#define CLK42X_SPEED_4096KHZ (( 16 << 22) | ( 34 << 12) | 127)
-+#define CLK42X_SPEED_8192KHZ (( 8 << 22) | ( 34 << 12) | 255)
-+
-+#define CLK46X_SPEED_512KHZ (( 130 << 22) | ( 24 << 12) | 127)
-+#define CLK46X_SPEED_1536KHZ (( 43 << 22) | (152 << 12) | 383)
-+#define CLK46X_SPEED_1544KHZ (( 43 << 22) | ( 66 << 12) | 385)
-+#define CLK46X_SPEED_2048KHZ (( 32 << 22) | (280 << 12) | 511)
-+#define CLK46X_SPEED_4096KHZ (( 16 << 22) | (280 << 12) | 1023)
-+#define CLK46X_SPEED_8192KHZ (( 8 << 22) | (280 << 12) | 2047)
-+
-+
-+/* hss_config, LUT entries */
-+#define TDMMAP_UNASSIGNED 0
-+#define TDMMAP_HDLC 1 /* HDLC - packetized */
-+#define TDMMAP_VOICE56K 2 /* Voice56K - 7-bit channelized */
-+#define TDMMAP_VOICE64K 3 /* Voice64K - 8-bit channelized */
-+
-+/* offsets into HSS config */
-+#define HSS_CONFIG_TX_PCR 0x00 /* port configuration registers */
-+#define HSS_CONFIG_RX_PCR 0x04
-+#define HSS_CONFIG_CORE_CR 0x08 /* loopback control, HSS# */
-+#define HSS_CONFIG_CLOCK_CR 0x0C /* clock generator control */
-+#define HSS_CONFIG_TX_FCR 0x10 /* frame configuration registers */
-+#define HSS_CONFIG_RX_FCR 0x14
-+#define HSS_CONFIG_TX_LUT 0x18 /* channel look-up tables */
-+#define HSS_CONFIG_RX_LUT 0x38
-+
-+
-+/* NPE command codes */
-+/* writes the ConfigWord value to the location specified by offset */
-+#define PORT_CONFIG_WRITE 0x40
-+
-+/* triggers the NPE to load the contents of the configuration table */
-+#define PORT_CONFIG_LOAD 0x41
-+
-+/* triggers the NPE to return an HssErrorReadResponse message */
-+#define PORT_ERROR_READ 0x42
-+
-+/* reset NPE internal status and enable the HssChannelized operation */
-+#define CHAN_FLOW_ENABLE 0x43
-+#define CHAN_FLOW_DISABLE 0x44
-+#define CHAN_IDLE_PATTERN_WRITE 0x45
-+#define CHAN_NUM_CHANS_WRITE 0x46
-+#define CHAN_RX_BUF_ADDR_WRITE 0x47
-+#define CHAN_RX_BUF_CFG_WRITE 0x48
-+#define CHAN_TX_BLK_CFG_WRITE 0x49
-+#define CHAN_TX_BUF_ADDR_WRITE 0x4A
-+#define CHAN_TX_BUF_SIZE_WRITE 0x4B
-+#define CHAN_TSLOTSWITCH_ENABLE 0x4C
-+#define CHAN_TSLOTSWITCH_DISABLE 0x4D
-+
-+/* downloads the gainWord value for a timeslot switching channel associated
-+ with bypassNum */
-+#define CHAN_TSLOTSWITCH_GCT_DOWNLOAD 0x4E
-+
-+/* triggers the NPE to reset internal status and enable the HssPacketized
-+ operation for the flow specified by pPipe */
-+#define PKT_PIPE_FLOW_ENABLE 0x50
-+#define PKT_PIPE_FLOW_DISABLE 0x51
-+#define PKT_NUM_PIPES_WRITE 0x52
-+#define PKT_PIPE_FIFO_SIZEW_WRITE 0x53
-+#define PKT_PIPE_HDLC_CFG_WRITE 0x54
-+#define PKT_PIPE_IDLE_PATTERN_WRITE 0x55
-+#define PKT_PIPE_RX_SIZE_WRITE 0x56
-+#define PKT_PIPE_MODE_WRITE 0x57
-+
-+/* HDLC packet status values - desc->status */
-+#define ERR_SHUTDOWN 1 /* stop or shutdown occurrance */
-+#define ERR_HDLC_ALIGN 2 /* HDLC alignment error */
-+#define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */
-+#define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving
-+ this packet (if buf_len < pkt_len) */
-+#define ERR_HDLC_TOO_LONG 5 /* HDLC frame size too long */
-+#define ERR_HDLC_ABORT 6 /* abort sequence received */
-+#define ERR_DISCONNECTING 7 /* disconnect is in progress */
-+
-+#define CLOCK_EXT 0
-+#define CLOCK_INT 1
-+
-+enum mode {MODE_HDLC = 0, MODE_RAW, MODE_G704};
-+enum rx_tx_bit {
-+ TX_BIT = 0,
-+ RX_BIT = 1
-+};
-+enum chan_bit {
-+ CHAN_0 = (1 << 0),
-+ CHAN_1 = (1 << 1),
-+ CHAN_2 = (1 << 2),
-+ CHAN_3 = (1 << 3),
-+ CHAN_4 = (1 << 4),
-+ CHAN_5 = (1 << 5),
-+ CHAN_6 = (1 << 6),
-+ CHAN_7 = (1 << 7),
-+ CHAN_8 = (1 << 8),
-+ CHAN_9 = (1 << 9),
-+ CHAN_10 = (1 << 10),
-+ CHAN_11 = (1 << 11),
-+ CHAN_12 = (1 << 12),
-+ CHAN_13 = (1 << 13),
-+ CHAN_14 = (1 << 14),
-+ CHAN_15 = (1 << 15)
-+};
-+
-+enum alignment { NOT_ALIGNED = 0, EVEN_FIRST, ODD_FIRST };
-+
-+#ifdef __ARMEB__
-+typedef struct sk_buff buffer_t;
-+#define free_buffer dev_kfree_skb
-+#define free_buffer_irq dev_kfree_skb_irq
-+#else
-+typedef void buffer_t;
-+#define free_buffer kfree
-+#define free_buffer_irq kfree
-+#endif
-+
-+struct hss_device {
-+ struct port *port;
-+ unsigned int open_count, excl_open;
-+ unsigned long tx_loc, rx_loc; /* bytes */
-+ unsigned long tx_frame, rx_frame; /* Frames */
-+ u8 id, chan_count;
-+ u8 log_channels[MAX_CHANNELS];
-+
-+ u8 *rx_buf;
-+ u8 *tx_buf;
-+
-+ size_t rx_buffer_size;
-+ size_t rx_period_size;
-+ size_t tx_buffer_size;
-+ size_t tx_period_size;
-+
-+ void (*rx_callback)(void *data);
-+ void *rx_data;
-+ void (*tx_callback)(void *data);
-+ void *tx_data;
-+ void *private_data;
-+};
-+
-+extern struct hss_device *hss_handle[32];
-+extern struct port *hss_port[2];
-+
-+struct port {
-+ unsigned char init;
-+
-+ struct device *dev;
-+
-+ struct tasklet_struct task;
-+ unsigned int id;
-+ unsigned long chan_rx_bitmap;
-+ unsigned long chan_tx_bitmap;
-+ unsigned char chan_open;
-+
-+ /* the following fields must be protected by npe_lock */
-+ enum mode mode;
-+ unsigned int clock_type, clock_rate, loopback;
-+ unsigned int frame_size, frame_sync_offset;
-+ unsigned int next_rx_frame;
-+
-+ struct hss_device *chan_devices[MAX_CHAN_DEVICES];
-+ u32 chan_tx_buf_phys, chan_rx_buf_phys;
-+ u32 chan_tx_pointers_phys;
-+ u32 *chan_tx_pointers;
-+ u8 *chan_rx_buf;
-+ u8 *chan_tx_buf;
-+ u8 *tx_lists[CHAN_TX_LISTS][8];
-+ u8 *rx_frames[8][CHAN_TX_LISTS];
-+ unsigned int chan_open_count, hdlc_open;
-+ unsigned int chan_started, initialized, just_set_offset;
-+ unsigned int chan_last_rx, chan_last_tx;
-+
-+ /* assigned channels, may be invalid with given frame length or mode */
-+ u8 channels[MAX_CHANNELS];
-+ int msg_count;
-+};
-+
-+/* NPE message structure */
-+struct msg {
-+#ifdef __ARMEB__
-+ u8 cmd, unused, hss_port, index;
-+ union {
-+ struct { u8 data8a, data8b, data8c, data8d; };
-+ struct { u16 data16a, data16b; };
-+ struct { u32 data32; };
-+ };
-+#else
-+ u8 index, hss_port, unused, cmd;
-+ union {
-+ struct { u8 data8d, data8c, data8b, data8a; };
-+ struct { u16 data16b, data16a; };
-+ struct { u32 data32; };
-+ };
-+#endif
-+};
-+
-+#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ (n) * sizeof(struct desc))
-+#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
-+
-+#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ ((n) + RX_DESCS) * sizeof(struct desc))
-+#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
-+
-+int hss_prepare_chan(struct port *port);
-+void hss_chan_stop(struct port *port);
-+
-+struct hss_device *hss_init(int id, int channel);
-+int hss_chan_open(struct hss_device *hdev);
-+int hss_chan_close(struct hss_device *hdev);
-+
-+int hss_set_tx_callback(struct hss_device *hdev, void (*tx_callback)(void *), void *tx_data);
-+int hss_set_rx_callback(struct hss_device *hdev, void (*rx_callback)(void *), void *rx_data);
-+int hss_tx_start(struct hss_device *hdev);
-+int hss_tx_stop(struct hss_device *hdev);
-+int hss_rx_start(struct hss_device *hdev);
-+int hss_rx_stop(struct hss_device *hdev);
-+
-+int hss_config_rx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size);
-+int hss_config_tx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size);
-+unsigned long hss_curr_offset_rx(struct hss_device *hdev);
-+unsigned long hss_curr_offset_tx(struct hss_device *hdev);
-+
diff --git a/target/linux/ixp4xx/patches-4.9/180-tw5334_support.patch b/target/linux/ixp4xx/patches-4.9/180-tw5334_support.patch
deleted file mode 100644
index b56fbb732d..0000000000
--- a/target/linux/ixp4xx/patches-4.9/180-tw5334_support.patch
+++ /dev/null
@@ -1,287 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -160,6 +160,14 @@ config ARCH_PRPMC1100
- PrPCM1100 Processor Mezanine Module. For more information on
- this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_TW5334
-+ bool "Titan Wireless TW-533-4"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Titan
-+ Wireless TW533-4. For more information on this platform,
-+ see http://openwrt.org
-+
- config MACH_NAS100D
- bool
- prompt "NAS100D"
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid
- obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
-
- obj-y += common.o
-
-@@ -49,6 +50,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
- obj-$(CONFIG_MACH_COMPEXWP18) += compex42x-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-+obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -44,7 +44,7 @@ static __inline__ void __arch_decomp_set
- machine_is_gateway7001() || machine_is_wg302v2() ||
- machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
- machine_is_pronghorn() || machine_is_pronghorn_metro() ||
-- machine_is_wrt300nv2())
-+ machine_is_wrt300nv2() || machine_is_tw5334())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw5334-pci.c
-@@ -0,0 +1,68 @@
-+/*
-+ * arch/arch/mach-ixp4xx/tw5334-pci.c
-+ *
-+ * PCI setup routines for the Titan Wireless TW-533-4
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init tw5334_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init tw5334_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 12)
-+ return IRQ_IXP4XX_GPIO6;
-+ else if (slot == 13)
-+ return IRQ_IXP4XX_GPIO2;
-+ else if (slot == 14)
-+ return IRQ_IXP4XX_GPIO1;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO0;
-+ else return -1;
-+}
-+
-+struct hw_pci tw5334_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = tw5334_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = tw5334_map_irq,
-+};
-+
-+int __init tw5334_pci_init(void)
-+{
-+ if (machine_is_tw5334())
-+ pci_common_init(&tw5334_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(tw5334_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
-@@ -0,0 +1,167 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw5334-setup.c
-+ *
-+ * Board setup for the Titan Wireless TW-533-4
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz at openwrt.org>
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data tw5334_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource tw5334_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device tw5334_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &tw5334_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw5334_flash_resource,
-+};
-+
-+static struct resource tw5334_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port tw5334_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device tw5334_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = tw5334_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw5334_uart_resource,
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info tw5334_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device tw5334_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = tw5334_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = tw5334_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *tw5334_devices[] __initdata = {
-+ &tw5334_flash,
-+ &tw5334_uart,
-+ &tw5334_eth[0],
-+ &tw5334_eth[1],
-+};
-+
-+static void __init tw5334_init(void)
-+{
-+ uint8_t __iomem *f;
-+ int i;
-+
-+ ixp4xx_sys_init();
-+
-+ tw5334_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ tw5334_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(tw5334_devices, ARRAY_SIZE(tw5334_devices));
-+
-+ /*
-+ * Map in a portion of the flash and read the MAC addresses.
-+ * Since it is stored in BE in the flash itself, we need to
-+ * byteswap it if we're in LE mode.
-+ */
-+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
-+ if (f) {
-+ for (i = 0; i < 6; i++) {
-+#ifdef __ARMEB__
-+ tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + i);
-+ tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + i);
-+#else
-+ tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + (i^3));
-+ tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + (i^3));
-+#endif
-+ }
-+ iounmap(f);
-+ }
-+
-+ printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 0\n",
-+ tw5334_plat_eth[0].hwaddr);
-+ printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 1\n",
-+ tw5334_plat_eth[1].hwaddr);
-+}
-+
-+#ifdef CONFIG_MACH_TW5334
-+MACHINE_START(TW5334, "Titan Wireless TW-533-4")
-+ /* Maintainer: Imre Kaloz <kaloz at openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = tw5334_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-4.9/185-mi424wr_support.patch b/target/linux/ixp4xx/patches-4.9/185-mi424wr_support.patch
deleted file mode 100644
index 7c229276fc..0000000000
--- a/target/linux/ixp4xx/patches-4.9/185-mi424wr_support.patch
+++ /dev/null
@@ -1,504 +0,0 @@
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -26,6 +26,7 @@ CONFIG_MACH_NAS100D=y
- CONFIG_MACH_DSMG600=y
- CONFIG_MACH_FSG=y
- CONFIG_MACH_GTWX5715=y
-+CONFIG_MACH_MI424WR=y
- CONFIG_IXP4XX_QMGR=y
- CONFIG_IXP4XX_NPE=y
- # CONFIG_ARM_THUMB is not set
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -258,6 +258,13 @@ config MACH_MIC256
- Say 'Y' here if you want your kernel to support the MIC256
- board from OMICRON electronics GmbH.
-
-+config MACH_MI424WR
-+ bool "Actiontec MI424WR"
-+ depends on ARCH_IXP4XX
-+ select PCI
-+ help
-+ Add support for the Actiontec MI424-WR.
-+
- comment "IXP4xx Options"
-
- config IXP4XX_INDIRECT_PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixd
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
-+obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
-
- obj-y += common.o
-
-@@ -51,6 +52,7 @@ obj-$(CONFIG_MACH_COMPEXWP18) += compex4
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
- obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
-+obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/mi424wr-pci.c
-@@ -0,0 +1,70 @@
-+/*
-+ * arch/arm/mach-ixp4xx/mi424wr-pci.c
-+ *
-+ * Actiontec MI424WR board-level PCI initialization
-+ *
-+ * Copyright (C) 2008 Jose Vasconcellos
-+ *
-+ * Maintainer: Jose Vasconcellos <jvasco at verizon.net>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/pci.h>
-+
-+/* PCI controller GPIO to IRQ pin mappings
-+ * This information was obtained from Actiontec's GPL release.
-+ *
-+ * INTA INTB
-+ * SLOT 13 8 6
-+ * SLOT 14 7 8
-+ * SLOT 15 6 7
-+ */
-+
-+void __init mi424wr_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init mi424wr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 13)
-+ return IRQ_IXP4XX_GPIO8;
-+ if (slot == 14)
-+ return IRQ_IXP4XX_GPIO7;
-+ if (slot == 15)
-+ return IRQ_IXP4XX_GPIO6;
-+
-+ return -1;
-+}
-+
-+struct hw_pci mi424wr_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = mi424wr_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = mi424wr_map_irq,
-+};
-+
-+int __init mi424wr_pci_init(void)
-+{
-+ if (machine_is_mi424wr())
-+ pci_common_init(&mi424wr_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(mi424wr_pci_init);
-+
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
-@@ -0,0 +1,384 @@
-+/*
-+ * arch/arm/mach-ixp4xx/mi424wr-setup.c
-+ *
-+ * Actiontec MI424-WR board setup
-+ * Copyright (c) 2008 Jose Vasconcellos
-+ *
-+ * Based on Gemtek GTWX5715 by
-+ * Copyright (C) 2004 George T. Joseph
-+ * Derived from Coyote
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/leds.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_gpio.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/setup.h>
-+#include <asm/system_info.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+/*
-+ * GPIO 2,3,4 and 9 are hard wired to the Micrel/Kendin KS8995M Switch
-+ * and operate as an SPI type interface. The details of the interface
-+ * are available on Kendin/Micrel's web site.
-+ */
-+
-+#define MI424WR_KSSPI_SELECT 9
-+#define MI424WR_KSSPI_TXD 4
-+#define MI424WR_KSSPI_CLOCK 2
-+#define MI424WR_KSSPI_RXD 3
-+
-+/*
-+ * The "reset" button is wired to GPIO 10.
-+ * The GPIO is brought "low" when the button is pushed.
-+ */
-+
-+#define MI424WR_BUTTON_GPIO 10
-+#define MI424WR_BUTTON_IRQ IRQ_IXP4XX_GPIO10
-+
-+#define MI424WR_MOCA_WAN_LED 11
-+
-+/* Latch on CS1 - taken from Actiontec's 2.4 source code
-+ *
-+ * default latch value
-+ * 0 - power alarm led (red) 0 (off)
-+ * 1 - power led (green) 0 (off)
-+ * 2 - wireless led (green) 1 (off)
-+ * 3 - no internet led (red) 0 (off)
-+ * 4 - internet ok led (green) 0 (off)
-+ * 5 - moca LAN 0 (off)
-+ * 6 - WAN alarm led (red) 0 (off)
-+ * 7 - PCI reset 1 (not reset)
-+ * 8 - IP phone 1 led (green) 1 (off)
-+ * 9 - IP phone 2 led (green) 1 (off)
-+ * 10 - VOIP ready led (green) 1 (off)
-+ * 11 - PSTN relay 1 control 0 (PSTN)
-+ * 12 - PSTN relay 1 control 0 (PSTN)
-+ * 13 - N/A
-+ * 14 - N/A
-+ * 15 - N/A
-+ */
-+
-+#define MI424WR_LATCH_MASK 0x04
-+#define MI424WR_LATCH_DEFAULT 0x1f86
-+
-+#define MI424WR_LATCH_ALARM_LED 0x00
-+#define MI424WR_LATCH_POWER_LED 0x01
-+#define MI424WR_LATCH_WIRELESS_LED 0x02
-+#define MI424WR_LATCH_INET_DOWN_LED 0x03
-+#define MI424WR_LATCH_INET_OK_LED 0x04
-+#define MI424WR_LATCH_MOCA_LAN_LED 0x05
-+#define MI424WR_LATCH_WAN_ALARM_LED 0x06
-+#define MI424WR_LATCH_PCI_RESET 0x07
-+#define MI424WR_LATCH_PHONE1_LED 0x08
-+#define MI424WR_LATCH_PHONE2_LED 0x09
-+#define MI424WR_LATCH_VOIP_LED 0x10
-+#define MI424WR_LATCH_PSTN_RELAY1 0x11
-+#define MI424WR_LATCH_PSTN_RELAY2 0x12
-+
-+/* initialize CS1 to default timings, Intel style, 16-bit bus */
-+#define MI424WR_CS1_CONFIG 0x80000002
-+
-+/* Define both UARTs but they are not easily accessible.
-+ */
-+
-+static struct resource mi424wr_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+
-+static struct plat_serial8250_port mi424wr_uart_platform_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device mi424wr_uart_device = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = mi424wr_uart_platform_data,
-+ .num_resources = ARRAY_SIZE(mi424wr_uart_resources),
-+ .resource = mi424wr_uart_resources,
-+};
-+
-+static struct flash_platform_data mi424wr_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource mi424wr_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device mi424wr_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &mi424wr_flash_data,
-+ .num_resources = 1,
-+ .resource = &mi424wr_flash_resource,
-+};
-+
-+static struct spi_gpio_platform_data mi424wr_spi_platform_data = {
-+ .sck = MI424WR_KSSPI_CLOCK,
-+ .mosi = MI424WR_KSSPI_TXD,
-+ .miso = MI424WR_KSSPI_RXD,
-+ .num_chipselect = 1,
-+};
-+
-+static struct platform_device mi424wr_spi_device = {
-+ .name = "spi-gpio",
-+ .id = 1,
-+ .dev.platform_data = &mi424wr_spi_platform_data,
-+};
-+
-+static struct spi_board_info mi424wr_spi_devices[] __initdata = {
-+ {
-+ .modalias = "spi-ks8995",
-+ .max_speed_hz = 500000,
-+ .mode = SPI_MODE_0,
-+ .bus_num = 1,
-+ .chip_select = 0,
-+ .controller_data = (void *)MI424WR_KSSPI_SELECT,
-+ }
-+};
-+
-+static struct gpio_led mi424wr_gpio_led[] = {
-+ {
-+ .name = "moca-wan", /* green led */
-+ .gpio = MI424WR_MOCA_WAN_LED,
-+ .active_low = 0,
-+ }
-+};
-+
-+static struct gpio_led_platform_data mi424wr_gpio_leds_data = {
-+ .num_leds = 1,
-+ .leds = mi424wr_gpio_led,
-+};
-+
-+static struct platform_device mi424wr_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &mi424wr_gpio_leds_data,
-+};
-+
-+static uint16_t latch_value = MI424WR_LATCH_DEFAULT;
-+static uint16_t __iomem *iobase;
-+
-+static void mi424wr_latch_set_led(u8 bit, enum led_brightness value)
-+{
-+
-+ if (((MI424WR_LATCH_MASK >> bit) & 1) ^ (value == LED_OFF))
-+ latch_value &= ~(0x1 << bit);
-+ else
-+ latch_value |= (0x1 << bit);
-+
-+ __raw_writew(latch_value, iobase);
-+
-+}
-+
-+static struct latch_led mi424wr_latch_led[] = {
-+ {
-+ .name = "power-alarm",
-+ .bit = MI424WR_LATCH_ALARM_LED,
-+ },
-+ {
-+ .name = "power-ok",
-+ .bit = MI424WR_LATCH_POWER_LED,
-+ },
-+ {
-+ .name = "wireless", /* green led */
-+ .bit = MI424WR_LATCH_WIRELESS_LED,
-+ },
-+ {
-+ .name = "inet-down", /* red led */
-+ .bit = MI424WR_LATCH_INET_DOWN_LED,
-+ },
-+ {
-+ .name = "inet-up", /* green led */
-+ .bit = MI424WR_LATCH_INET_OK_LED,
-+ },
-+ {
-+ .name = "moca-lan", /* green led */
-+ .bit = MI424WR_LATCH_MOCA_LAN_LED,
-+ },
-+ {
-+ .name = "wan-alarm", /* red led */
-+ .bit = MI424WR_LATCH_WAN_ALARM_LED,
-+ }
-+};
-+
-+static struct latch_led_platform_data mi424wr_latch_leds_data = {
-+ .num_leds = ARRAY_SIZE(mi424wr_latch_led),
-+ .mem = 0x51000000,
-+ .leds = mi424wr_latch_led,
-+ .set_led = mi424wr_latch_set_led,
-+};
-+
-+static struct platform_device mi424wr_latch_leds = {
-+ .name = "leds-latch",
-+ .id = -1,
-+ .dev.platform_data = &mi424wr_latch_leds_data,
-+};
-+
-+static struct eth_plat_info mi424wr_wan_data = {
-+ .phy = 17, /* KS8721 */
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct eth_plat_info mi424wr_lan_data = {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct platform_device mi424wr_npe_devices[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &mi424wr_lan_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &mi424wr_wan_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct eth_plat_info mi424wr_wanD_data = {
-+ .phy = 5,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct eth_plat_info mi424wr_lanD_data = {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct platform_device mi424wr_npeD_devices[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &mi424wr_lanD_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &mi424wr_wanD_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *mi424wr_devices[] __initdata = {
-+ &mi424wr_uart_device,
-+ &mi424wr_flash,
-+ &mi424wr_spi_device,
-+ &mi424wr_gpio_leds,
-+ &mi424wr_latch_leds,
-+};
-+
-+static void __init mi424wr_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ mi424wr_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ mi424wr_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = MI424WR_CS1_CONFIG;
-+
-+ /* configure button as input
-+ */
-+ gpio_line_config(MI424WR_BUTTON_GPIO, IXP4XX_GPIO_IN);
-+
-+ /* Initialize LEDs and enables PCI bus.
-+ */
-+ iobase = ioremap_nocache(IXP4XX_EXP_BUS_BASE(1), 0x1000);
-+ __raw_writew(latch_value, iobase);
-+
-+ spi_register_board_info(mi424wr_spi_devices, ARRAY_SIZE(mi424wr_spi_devices));
-+ platform_add_devices(mi424wr_devices, ARRAY_SIZE(mi424wr_devices));
-+
-+ /* Need to figure out how to detect revD.
-+ * Look for a revision argument sent by redboot.
-+ */
-+#define revD 4
-+ if (system_rev == revD) {
-+ platform_device_register(&mi424wr_npeD_devices[0]);
-+ platform_device_register(&mi424wr_npeD_devices[1]);
-+ } else {
-+ platform_device_register(&mi424wr_npe_devices[0]);
-+ platform_device_register(&mi424wr_npe_devices[1]);
-+ }
-+}
-+
-+
-+MACHINE_START(MI424WR, "Actiontec MI424WR")
-+ /* Maintainer: Jose Vasconcellos */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = mi424wr_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+
diff --git a/target/linux/ixp4xx/patches-4.9/190-cambria_support.patch b/target/linux/ixp4xx/patches-4.9/190-cambria_support.patch
deleted file mode 100644
index 83a3319261..0000000000
--- a/target/linux/ixp4xx/patches-4.9/190-cambria_support.patch
+++ /dev/null
@@ -1,1131 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -21,6 +21,14 @@ config MACH_AVILA
- Avila Network Platform. For more information on this platform,
- see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_CAMBRIA
-+ bool "Cambria"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Gateworks
-+ Cambria series. For more information on this platform,
-+ see <file:Documentation/arm/IXP4xx>.
-+
- config MACH_LOFT
- bool "Loft"
- depends on MACH_AVILA
-@@ -218,7 +226,7 @@ config CPU_IXP46X
-
- config CPU_IXP43X
- bool
-- depends on MACH_KIXRP435
-+ depends on MACH_KIXRP435 || MACH_CAMBRIA
- default y
-
- config MACH_GTWX5715
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -7,6 +7,7 @@ obj-pci-n :=
-
- obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
-+obj-pci-$(CONFIG_MACH_CAMBRIA) += cambria-pci.o
- obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
- obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
- obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
-@@ -31,6 +32,7 @@ obj-y += common.o
-
- obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
- obj-$(CONFIG_MACH_AVILA) += avila-setup.o
-+obj-$(CONFIG_MACH_CAMBRIA) += cambria-setup.o
- obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/cambria-pci.c
-@@ -0,0 +1,78 @@
-+/*
-+ * arch/arch/mach-ixp4xx/cambria-pci.c
-+ *
-+ * PCI setup routines for Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init cambria_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init cambria_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else if (slot == 4)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 6)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO8;
-+
-+ else return -1;
-+}
-+
-+struct hw_pci cambria_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = cambria_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = cambria_map_irq,
-+};
-+
-+int __init cambria_pci_init(void)
-+{
-+ if (machine_is_cambria())
-+ pci_common_init(&cambria_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(cambria_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -0,0 +1,1003 @@
-+/*
-+ * arch/arm/mach-ixp4xx/cambria-setup.c
-+ *
-+ * Board setup for the Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz at openwrt.org>
-+ * Copyright (C) 2012 Gateworks Corporation <support at gateworks.com>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <kaloz at openwrt.org>
-+ * Tim Harvey <tharvey at gateworks.com>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/gpio.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/platform_data/at24.h>
-+#include <linux/i2c/gw_i2c_pld.h>
-+#include <linux/platform_data/pca953x.h>
-+#include <linux/if_ether.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/memory.h>
-+#include <linux/netdevice.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/socket.h>
-+#include <linux/types.h>
-+#include <linux/tty.h>
-+#include <linux/irq.h>
-+#include <linux/usb/ehci_pdriver.h>
-+
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+#include <asm/setup.h>
-+
-+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-+
-+struct cambria_board_info {
-+ unsigned char *model;
-+ void (*setup)(void);
-+};
-+
-+static struct cambria_board_info *cambria_info __initdata;
-+
-+static struct flash_platform_data cambria_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource cambria_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device cambria_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &cambria_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &cambria_flash_resource,
-+};
-+
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_data = {
-+ .sda_pin = 7,
-+ .scl_pin = 6,
-+};
-+
-+static struct platform_device cambria_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &cambria_i2c_gpio_data,
-+ },
-+};
-+
-+#ifdef SFP_SERIALID
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpa_data = {
-+ .sda_pin = 113,
-+ .scl_pin = 112,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+};
-+
-+static struct platform_device cambria_i2c_gpio_sfpa = {
-+ .name = "i2c-gpio",
-+ .id = 1,
-+ .dev = {
-+ .platform_data = &cambria_i2c_gpio_sfpa_data,
-+ },
-+};
-+
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpb_data = {
-+ .sda_pin = 115,
-+ .scl_pin = 114,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+};
-+
-+static struct platform_device cambria_i2c_gpio_sfpb = {
-+ .name = "i2c-gpio",
-+ .id = 2,
-+ .dev = {
-+ .platform_data = &cambria_i2c_gpio_sfpb_data,
-+ },
-+};
-+#endif // #ifdef SFP_SERIALID
-+
-+static struct eth_plat_info cambria_npec_data = {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct eth_plat_info cambria_npea_data = {
-+ .phy = 2,
-+ .rxq = 2,
-+ .txreadyq = 19,
-+};
-+
-+static struct platform_device cambria_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &cambria_npec_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+};
-+
-+static struct platform_device cambria_npea_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEA,
-+ .dev.platform_data = &cambria_npea_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+};
-+
-+static struct resource cambria_uart_resource = {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port cambria_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device cambria_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = cambria_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &cambria_uart_resource,
-+};
-+
-+static struct resource cambria_optional_uart_resources[] = {
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x53000000,
-+ .end = 0x53000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x53000000,
-+ .end = 0x53000fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port cambria_optional_uart_data[] = {
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM_DELAY,
-+ .regshift = 0,
-+ .uartclk = 1843200,
-+ .rw_delay = 10,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM_DELAY,
-+ .regshift = 0,
-+ .uartclk = 1843200,
-+ .rw_delay = 10,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ { },
-+};
-+
-+static struct platform_device cambria_optional_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM1,
-+ .dev.platform_data = cambria_optional_uart_data,
-+ .num_resources = 2,
-+ .resource = cambria_optional_uart_resources,
-+};
-+
-+static struct resource cambria_pata_resources[] = {
-+ {
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "intrq",
-+ .start = IRQ_IXP4XX_GPIO12,
-+ .end = IRQ_IXP4XX_GPIO12,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct ixp4xx_pata_data cambria_pata_data = {
-+ .cs0_bits = 0xbfff3c03,
-+ .cs1_bits = 0xbfff3c03,
-+};
-+
-+static struct platform_device cambria_pata = {
-+ .name = "pata_ixp4xx_cf",
-+ .id = 0,
-+ .dev.platform_data = &cambria_pata_data,
-+ .num_resources = ARRAY_SIZE(cambria_pata_resources),
-+ .resource = cambria_pata_resources,
-+};
-+
-+static struct gpio_led cambria_gpio_leds[] = {
-+ {
-+ .name = "user",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "user2",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "user3",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "user4",
-+ .gpio = 0,
-+ .active_low = 1,
-+ }
-+};
-+
-+static struct gpio_led_platform_data cambria_gpio_leds_data = {
-+ .num_leds = 1,
-+ .leds = cambria_gpio_leds,
-+};
-+
-+static struct platform_device cambria_gpio_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &cambria_gpio_leds_data,
-+};
-+
-+static struct resource cambria_gpio_resources[] = {
-+ {
-+ .name = "gpio",
-+ .flags = 0,
-+ },
-+};
-+
-+static struct gpio cambria_gpios_gw2350[] = {
-+ // ARM GPIO
-+#if 0 // configured from bootloader
-+ { 0, GPIOF_IN, "ARM_DIO0" },
-+ { 1, GPIOF_IN, "ARM_DIO1" },
-+ { 2, GPIOF_IN, "ARM_DIO2" },
-+ { 3, GPIOF_IN, "ARM_DIO3" },
-+ { 4, GPIOF_IN, "ARM_DIO4" },
-+ { 5, GPIOF_IN, "ARM_DIO5" },
-+ { 12, GPIOF_OUT_INIT_HIGH, "WDOGEN#" },
-+#endif
-+ { 8, GPIOF_IN, "ARM_DIO8" },
-+ { 9, GPIOF_IN, "ARM_DIO9" },
-+};
-+
-+static struct gpio cambria_gpios_gw2358[] = {
-+ // ARM GPIO
-+#if 0 // configured from bootloader
-+ { 0, GPIOF_IN, "*VINLOW#" },
-+ { 2, GPIOF_IN, "*GPS_PPS" },
-+ { 3, GPIOF_IN, "*GPS_IRQ#" },
-+ { 4, GPIOF_IN, "*RS485_IRQ#" },
-+ { 5, GPIOF_IN, "*SER_EN#" },
-+ { 14, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
-+#endif
-+};
-+
-+static struct gpio cambria_gpios_gw2359[] = {
-+ // ARM GPIO
-+#if 0 // configured from bootloader
-+ { 0, GPIOF_IN, "*PCA_IRQ#" },
-+ { 1, GPIOF_IN, "ARM_DIO1" },
-+ { 2, GPIOF_IN, "ARM_DIO2" },
-+ { 3, GPIOF_IN, "ARM_DIO3" },
-+ { 4, GPIOF_IN, "ARM_DIO4" },
-+ { 5, GPIOF_IN, "ARM_DIO5" },
-+ { 8, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
-+#endif
-+ { 11, GPIOF_OUT_INIT_HIGH, "*SER_EN" }, // console serial enable
-+ { 12, GPIOF_IN, "*GSC_IRQ#" },
-+ { 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
-+ // GSC GPIO
-+#if !(IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
-+ {100, GPIOF_IN, "*USER_PB#" },
-+#endif
-+ {103, GPIOF_OUT_INIT_HIGH, "*5V_EN" }, // 5V aux supply enable
-+ {108, GPIOF_IN, "*SMUXDA0" },
-+ {109, GPIOF_IN, "*SMUXDA1" },
-+ {110, GPIOF_IN, "*SMUXDA2" },
-+ {111, GPIOF_IN, "*SMUXDB0" },
-+ {112, GPIOF_IN, "*SMUXDB1" },
-+ {113, GPIOF_IN, "*SMUXDB2" },
-+ // PCA GPIO
-+ {118, GPIOF_IN, "*USIM2_DET#"}, // USIM2 Detect
-+ {120, GPIOF_OUT_INIT_LOW, "*USB1_PCI_SEL"}, // USB1 Select (1=PCI, 0=FP)
-+ {121, GPIOF_OUT_INIT_LOW, "*USB2_PCI_SEL"}, // USB2 Select (1=PCI, 0=FP)
-+ {122, GPIOF_IN, "*USIM1_DET#"}, // USIM1 Detect
-+ {123, GPIOF_OUT_INIT_HIGH, "*COM1_DTR#" }, // J21/J10
-+ {124, GPIOF_IN, "*COM1_DSR#" }, // J21/J10
-+ {127, GPIOF_IN, "PCA_DIO0" },
-+ {128, GPIOF_IN, "PCA_DIO1" },
-+ {129, GPIOF_IN, "PCA_DIO2" },
-+ {130, GPIOF_IN, "PCA_DIO3" },
-+ {131, GPIOF_IN, "PCA_DIO4" },
-+};
-+
-+static struct gpio cambria_gpios_gw2360[] = {
-+ // ARM GPIO
-+ { 0, GPIOF_IN, "*PCA_IRQ#" },
-+ { 11, GPIOF_OUT_INIT_LOW, "*SER0_EN#" },
-+ { 12, GPIOF_IN, "*GSC_IRQ#" },
-+ { 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
-+ // GSC GPIO
-+#if !(IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
-+ {100, GPIOF_IN, "*USER_PB#" },
-+#endif
-+ {108, GPIOF_OUT_INIT_LOW, "*ENET1_EN#" }, // ENET1 TX Enable
-+ {109, GPIOF_IN, "*ENET1_PRES#" }, // ENET1 Detect (0=SFP present)
-+ {110, GPIOF_OUT_INIT_LOW, "*ENET2_EN#" }, // ENET2 TX Enable
-+ {111, GPIOF_IN, "*ENET2_PRES#"}, // ENET2 Detect (0=SFP present)
-+ // PCA GPIO
-+ {116, GPIOF_OUT_INIT_HIGH, "*USIM2_LOC"}, // USIM2 Select (1=Loc, 0=Rem)
-+ {117, GPIOF_IN, "*USIM2_DET_LOC#" },// USIM2 Detect (Local Slot)
-+ {118, GPIOF_IN, "*USIM2_DET_REM#" },// USIM2 Detect (Remote Slot)
-+ {120, GPIOF_OUT_INIT_LOW, "*USB1_PCI_SEL"}, // USB1 Select (1=PCIe1, 0=J1)
-+ {121, GPIOF_OUT_INIT_LOW, "*USB2_PCI_SEL"}, // USB2 Select (1=PCIe2, 0=J1)
-+ {122, GPIOF_IN, "*USIM1_DET#"}, // USIM1 Detect
-+ {127, GPIOF_IN, "DIO0" },
-+ {128, GPIOF_IN, "DIO1" },
-+ {129, GPIOF_IN, "DIO2" },
-+ {130, GPIOF_IN, "DIO3" },
-+ {131, GPIOF_IN, "DIO4" },
-+};
-+
-+static struct latch_led cambria_latch_leds[] = {
-+ {
-+ .name = "ledA", /* green led */
-+ .bit = 0,
-+ },
-+ {
-+ .name = "ledB", /* green led */
-+ .bit = 1,
-+ },
-+ {
-+ .name = "ledC", /* green led */
-+ .bit = 2,
-+ },
-+ {
-+ .name = "ledD", /* green led */
-+ .bit = 3,
-+ },
-+ {
-+ .name = "ledE", /* green led */
-+ .bit = 4,
-+ },
-+ {
-+ .name = "ledF", /* green led */
-+ .bit = 5,
-+ },
-+ {
-+ .name = "ledG", /* green led */
-+ .bit = 6,
-+ },
-+ {
-+ .name = "ledH", /* green led */
-+ .bit = 7,
-+ }
-+};
-+
-+static struct latch_led_platform_data cambria_latch_leds_data = {
-+ .num_leds = 8,
-+ .leds = cambria_latch_leds,
-+ .mem = 0x53F40000,
-+};
-+
-+static struct platform_device cambria_latch_leds_device = {
-+ .name = "leds-latch",
-+ .id = -1,
-+ .dev.platform_data = &cambria_latch_leds_data,
-+};
-+
-+static struct resource cambria_usb0_resources[] = {
-+ {
-+ .start = 0xCD000000,
-+ .end = 0xCD000300,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = 32,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct resource cambria_usb1_resources[] = {
-+ {
-+ .start = 0xCE000000,
-+ .end = 0xCE000300,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = 33,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 ehci_dma_mask = ~(u32)0;
-+
-+static struct usb_ehci_pdata cambria_usb_pdata = {
-+ .big_endian_desc = 1,
-+ .big_endian_mmio = 1,
-+ .has_tt = 1,
-+ .caps_offset = 0x100,
-+};
-+
-+static struct platform_device cambria_usb0_device = {
-+ .name = "ehci-platform",
-+ .id = 0,
-+ .resource = cambria_usb0_resources,
-+ .num_resources = ARRAY_SIZE(cambria_usb0_resources),
-+ .dev = {
-+ .dma_mask = &ehci_dma_mask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &cambria_usb_pdata,
-+ },
-+};
-+
-+static struct platform_device cambria_usb1_device = {
-+ .name = "ehci-platform",
-+ .id = 1,
-+ .resource = cambria_usb1_resources,
-+ .num_resources = ARRAY_SIZE(cambria_usb1_resources),
-+ .dev = {
-+ .dma_mask = &ehci_dma_mask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &cambria_usb_pdata,
-+ },
-+};
-+
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
-+ .gpio_base = 16,
-+ .nr_gpio = 8,
-+};
-+
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
-+ .gpio_base = 24,
-+ .nr_gpio = 2,
-+};
-+
-+
-+static struct gpio_keys_button cambria_gpio_buttons[] = {
-+ {
-+ .desc = "user",
-+ .type = EV_KEY,
-+ .code = BTN_0,
-+ .debounce_interval = 6,
-+ .gpio = 25,
-+ }
-+};
-+
-+static struct gpio_keys_platform_data cambria_gpio_buttons_data = {
-+ .poll_interval = 500,
-+ .nbuttons = 1,
-+ .buttons = cambria_gpio_buttons,
-+};
-+
-+static struct platform_device cambria_gpio_buttons_device = {
-+ .name = "gpio-keys-polled",
-+ .id = -1,
-+ .dev.platform_data = &cambria_gpio_buttons_data,
-+};
-+
-+static struct platform_device *cambria_devices[] __initdata = {
-+ &cambria_i2c_gpio,
-+ &cambria_flash,
-+ &cambria_uart,
-+};
-+
-+static int cambria_register_gpio(struct gpio *array, size_t num)
-+{
-+ int i, err, ret;
-+
-+ ret = 0;
-+ for (i = 0; i < num; i++, array++) {
-+ const char *label = array->label;
-+ if (label[0] == '*')
-+ label++;
-+ err = gpio_request_one(array->gpio, array->flags, label);
-+ if (err)
-+ ret = err;
-+ else {
-+ err = gpio_export(array->gpio, array->label[0] != '*');
-+ }
-+ }
-+ return ret;
-+}
-+
-+static void __init cambria_gw23xx_setup(void)
-+{
-+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+}
-+
-+static void __init cambria_gw2350_setup(void)
-+{
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[0].mapbase = 0x52FF0000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52FF0000, 0x0fff);
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
-+
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[1].mapbase = 0x53FF0000;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-+
-+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_optional_uart);
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ platform_device_register(&cambria_gpio_leds_device);
-+
-+ /* gpio config (/sys/class/gpio) */
-+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2350));
-+}
-+
-+static void __init cambria_gw2358_setup(void)
-+{
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43; // bit0 = 16bit vs 8bit bus
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[0].mapbase = 0x53FC0000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x53FC0000, 0x0fff);
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
-+
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[1].mapbase = 0x53F80000;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-+
-+ cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
-+ (1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_optional_uart);
-+
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ platform_device_register(&cambria_pata);
-+
-+ cambria_gpio_leds[0].gpio = 24;
-+ platform_device_register(&cambria_gpio_leds_device);
-+
-+ platform_device_register(&cambria_latch_leds_device);
-+
-+ platform_device_register(&cambria_gpio_buttons_device);
-+
-+ /* gpio config (/sys/class/gpio) */
-+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2358));
-+}
-+
-+static void __init cambria_gw2359_setup(void)
-+{
-+#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
-+ /* The mvswitch driver has some hard-coded values which could
-+ * easily be turned into a platform resource if needed. For now they
-+ * match our hardware configuration:
-+ * MV_BASE 0x10 - phy base address
-+ * MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
-+ * MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
-+ *
-+ * The mvswitch driver registers a fixup which forces a driver match
-+ * if phy_addr matches MV_BASE
-+ *
-+ * Two static defautl VLAN's are created: WAN port in 1, and all other ports
-+ * in the other.
-+ */
-+ cambria_npea_data.phy = 0x10; // mvswitch driver catches this
-+#else
-+ // Switch Port5 to CPU is MII<->MII (no PHY) - this disables the genphy driver
-+ cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ // CPU NPE-C is in bridge bypass mode to Port4 PHY at 0x14
-+ cambria_npec_data.phy = 0x14;
-+#endif
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ cambria_gpio_leds_data.num_leds = 3;
-+ cambria_gpio_leds[0].name = "user1";
-+ cambria_gpio_leds[0].gpio = 125; // PNLLED1#
-+ cambria_gpio_leds[1].gpio = 126; // PNLLED3#
-+ cambria_gpio_leds[2].gpio = 119; // PNLLED4#
-+ platform_device_register(&cambria_gpio_leds_device);
-+
-+#if (IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
-+ cambria_gpio_buttons[0].gpio = 100;
-+ platform_device_register(&cambria_gpio_buttons_device);
-+#endif
-+
-+ /* gpio config (/sys/class/gpio) */
-+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2359));
-+}
-+
-+static void __init cambria_gw2360_setup(void)
-+{
-+ /* The GW2360 has 8 UARTs in addition to the 1 IXP4xxx UART.
-+ * The chip-selects are expanded via a 3-to-8 decoder and CS2
-+ * and they are 8bit devices
-+ */
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ cambria_optional_uart_data[0].mapbase = 0x52000000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
-+ cambria_optional_uart_data[0].uartclk = 18432000;
-+ cambria_optional_uart_data[0].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO2;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[1].mapbase = 0x52000008;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x52000008, 0x0fff);
-+ cambria_optional_uart_data[1].uartclk = 18432000;
-+ cambria_optional_uart_data[1].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO3;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[2].mapbase = 0x52000010;
-+ cambria_optional_uart_data[2].membase = (void __iomem *)ioremap(0x52000010, 0x0fff);
-+ cambria_optional_uart_data[2].uartclk = 18432000;
-+ cambria_optional_uart_data[2].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[2].irq = IRQ_IXP4XX_GPIO4;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[3].mapbase = 0x52000018;
-+ cambria_optional_uart_data[3].membase = (void __iomem *)ioremap(0x52000018, 0x0fff);
-+ cambria_optional_uart_data[3].uartclk = 18432000;
-+ cambria_optional_uart_data[3].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[3].irq = IRQ_IXP4XX_GPIO5;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO5, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[4].mapbase = 0x52000020;
-+ cambria_optional_uart_data[4].membase = (void __iomem *)ioremap(0x52000020, 0x0fff);
-+ cambria_optional_uart_data[4].uartclk = 18432000;
-+ cambria_optional_uart_data[4].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[4].irq = IRQ_IXP4XX_GPIO8;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[5].mapbase = 0x52000028;
-+ cambria_optional_uart_data[5].membase = (void __iomem *)ioremap(0x52000028, 0x0fff);
-+ cambria_optional_uart_data[5].uartclk = 18432000;
-+ cambria_optional_uart_data[5].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[5].irq = IRQ_IXP4XX_GPIO9;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[6].mapbase = 0x52000030;
-+ cambria_optional_uart_data[6].membase = (void __iomem *)ioremap(0x52000030, 0x0fff);
-+ cambria_optional_uart_data[6].uartclk = 18432000;
-+ cambria_optional_uart_data[6].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[6].irq = IRQ_IXP4XX_GPIO10;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart.num_resources = 7,
-+ platform_device_register(&cambria_optional_uart);
-+
-+#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
-+ /* The mvswitch driver has some hard-coded values which could
-+ * easily be turned into a platform resource if needed. For now they
-+ * match our hardware configuration:
-+ * MV_BASE 0x10 - phy base address
-+ * MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
-+ * MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
-+ *
-+ * The mvswitch driver registers a fixup which forces a driver match
-+ * if phy_addr matches MV_BASE
-+ *
-+ * Two static defautl VLAN's are created: WAN port in 1, and all other ports
-+ * in the other.
-+ */
-+ cambria_npea_data.phy = 0x10; // mvswitch driver catches this
-+#else
-+ // Switch Port5 to CPU is MII<->MII (no PHY) - this disables the generic PHY driver
-+ cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+#endif
-+
-+ // disable genphy autonegotiation on NPE-C PHY (eth1) as its 100BaseFX
-+ //cambria_npec_data.noautoneg = 1; // disable autoneg
-+ cambria_npec_data.speed_10 = 0; // 100mbps
-+ cambria_npec_data.half_duplex = 0; // full-duplex
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ cambria_gpio_leds_data.num_leds = 3;
-+ cambria_gpio_leds[0].name = "user1";
-+ cambria_gpio_leds[0].gpio = 125;
-+ cambria_gpio_leds[1].gpio = 126;
-+ cambria_gpio_leds[2].gpio = 119;
-+ platform_device_register(&cambria_gpio_leds_device);
-+
-+#if (IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
-+ cambria_gpio_buttons[0].gpio = 100;
-+ platform_device_register(&cambria_gpio_buttons_device);
-+#endif
-+
-+#ifdef SFP_SERIALID
-+ /* the SFP modules each have an i2c bus for serial ident via GSC GPIO
-+ * To use these the i2c-gpio driver must be changed to use the _cansleep
-+ * varients of gpio_get_value/gpio_set_value (I don't know why it doesn't
-+ * use that anyway as it doesn't operate in an IRQ context).
-+ * Additionally the i2c-gpio module must set the gpio to output-high prior
-+ * to changing direction to an input to enable internal Pullups
-+ */
-+ platform_device_register(&cambria_i2c_gpio_sfpa);
-+ platform_device_register(&cambria_i2c_gpio_sfpb);
-+#endif
-+
-+ /* gpio config (/sys/class/gpio) */
-+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2360));
-+}
-+
-+static struct cambria_board_info cambria_boards[] __initdata = {
-+ {
-+ .model = "GW2350",
-+ .setup = cambria_gw2350_setup,
-+ }, {
-+ .model = "GW2351",
-+ .setup = cambria_gw2350_setup,
-+ }, {
-+ .model = "GW2358",
-+ .setup = cambria_gw2358_setup,
-+ }, {
-+ .model = "GW2359",
-+ .setup = cambria_gw2359_setup,
-+ }, {
-+ .model = "GW2360",
-+ .setup = cambria_gw2360_setup,
-+ }, {
-+ .model = "GW2371",
-+ .setup = cambria_gw2358_setup,
-+ }
-+};
-+
-+static struct cambria_board_info * __init cambria_find_board_info(char *model)
-+{
-+ int i;
-+ model[6] = '\0';
-+
-+ for (i = 0; i < ARRAY_SIZE(cambria_boards); i++) {
-+ struct cambria_board_info *info = &cambria_boards[i];
-+ if (strcmp(info->model, model) == 0)
-+ return info;
-+ }
-+
-+ return NULL;
-+}
-+
-+static struct nvmem_device *at24_nvmem;
-+
-+static void at24_setup(struct nvmem_device *mem_acc, void *context)
-+{
-+ char mac_addr[ETH_ALEN];
-+ char model[7];
-+
-+ at24_nvmem = mem_acc;
-+
-+ /* Read MAC addresses */
-+ if (nvmem_device_read(at24_nvmem, 0x0, 6, mac_addr) == 6) {
-+ memcpy(&cambria_npec_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+ if (nvmem_device_read(at24_nvmem, 0x6, 6, mac_addr) == 6) {
-+ memcpy(&cambria_npea_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+
-+ /* Read the first 6 bytes of the model number */
-+ if (nvmem_device_read(at24_nvmem, 0x20, 6, model) == 6) {
-+ cambria_info = cambria_find_board_info(model);
-+ }
-+
-+}
-+
-+static struct at24_platform_data cambria_eeprom_info = {
-+ .byte_len = 1024,
-+ .page_size = 16,
-+ .flags = AT24_FLAG_READONLY,
-+ .setup = at24_setup,
-+};
-+
-+static struct pca953x_platform_data cambria_pca_data = {
-+ .gpio_base = 100,
-+ .irq_base = -1,
-+};
-+
-+static struct pca953x_platform_data cambria_pca2_data = {
-+ .gpio_base = 116,
-+ .irq_base = -1,
-+};
-+
-+static struct i2c_board_info __initdata cambria_i2c_board_info[] = {
-+ {
-+ I2C_BOARD_INFO("pca9555", 0x23),
-+ .platform_data = &cambria_pca_data,
-+ },
-+ {
-+ I2C_BOARD_INFO("pca9555", 0x27),
-+ .platform_data = &cambria_pca2_data,
-+ },
-+ {
-+ I2C_BOARD_INFO("ds1672", 0x68),
-+ },
-+ {
-+ I2C_BOARD_INFO("gsp", 0x29),
-+ },
-+ {
-+ I2C_BOARD_INFO("ad7418", 0x28),
-+ },
-+ {
-+ I2C_BOARD_INFO("24c08", 0x51),
-+ .platform_data = &cambria_eeprom_info
-+ },
-+ {
-+ I2C_BOARD_INFO("gw_i2c_pld", 0x56),
-+ .platform_data = &gw_i2c_pld_data0,
-+ },
-+ {
-+ I2C_BOARD_INFO("gw_i2c_pld", 0x57),
-+ .platform_data = &gw_i2c_pld_data1,
-+ },
-+};
-+
-+static void __init cambria_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; // make sure window is writable
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(ARRAY_AND_SIZE(cambria_devices));
-+
-+ cambria_pata_resources[0].start = 0x53e00000;
-+ cambria_pata_resources[0].end = 0x53e3ffff;
-+
-+ cambria_pata_resources[1].start = 0x53e40000;
-+ cambria_pata_resources[1].end = 0x53e7ffff;
-+
-+ cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
-+ cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+
-+ i2c_register_board_info(0, ARRAY_AND_SIZE(cambria_i2c_board_info));
-+}
-+
-+static int __init cambria_model_setup(void)
-+{
-+ if (!machine_is_cambria())
-+ return 0;
-+
-+ if (cambria_info) {
-+ printk(KERN_DEBUG "Running on Gateworks Cambria %s\n",
-+ cambria_info->model);
-+ cambria_info->setup();
-+ } else {
-+ printk(KERN_INFO "Unknown/missing Cambria model number"
-+ " -- defaults will be used\n");
-+ cambria_gw23xx_setup();
-+ }
-+
-+ return 0;
-+}
-+late_initcall(cambria_model_setup);
-+
-+MACHINE_START(CAMBRIA, "Gateworks Cambria series")
-+ /* Maintainer: Imre Kaloz <kaloz at openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = cambria_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-4.9/201-npe_driver_print_license_location.patch b/target/linux/ixp4xx/patches-4.9/201-npe_driver_print_license_location.patch
deleted file mode 100644
index f46b9c61bf..0000000000
--- a/target/linux/ixp4xx/patches-4.9/201-npe_driver_print_license_location.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -586,6 +586,8 @@ int npe_load_firmware(struct npe *npe, c
- npe_reset(npe);
- #endif
-
-+ print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
-+
- print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
- "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
- (image->id >> 8) & 0xFF, image->id & 0xFF);
diff --git a/target/linux/ixp4xx/patches-4.9/205-npe_driver_separate_phy_functions.patch b/target/linux/ixp4xx/patches-4.9/205-npe_driver_separate_phy_functions.patch
deleted file mode 100644
index cc77c5dddc..0000000000
--- a/target/linux/ixp4xx/patches-4.9/205-npe_driver_separate_phy_functions.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From e3eab80fb5d0a7d7fdb0f2f231b27161d5ec3804 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo at openwrt.org>
-Date: Sun, 30 Jun 2013 15:52:53 +0200
-Subject: [PATCH 23/36] 205-npe_driver_separate_phy_functions.patch
-
----
- drivers/net/ethernet/xscale/ixp4xx_eth.c | 70 ++++++++++++++++++++++--------
- 1 file changed, 51 insertions(+), 19 deletions(-)
-
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -588,6 +588,51 @@ static void ixp4xx_adjust_link(struct ne
- dev->name, port->speed, port->duplex ? "full" : "half");
- }
-
-+static int ixp4xx_phy_connect(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct eth_plat_info *plat = port->plat;
-+ char phy_id[MII_BUS_ID_SIZE + 3];
-+
-+ snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
-+ mdio_bus->id, plat->phy);
-+ port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
-+ PHY_INTERFACE_MODE_MII);
-+ if (IS_ERR(port->phydev)) {
-+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+ return PTR_ERR(port->phydev);
-+ }
-+
-+ /* mask with MAC supported features */
-+ port->phydev->supported &= PHY_BASIC_FEATURES;
-+ port->phydev->advertising = port->phydev->supported;
-+
-+ port->phydev->irq = PHY_POLL;
-+
-+ return 0;
-+}
-+
-+static void ixp4xx_phy_disconnect(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ phy_disconnect(port->phydev);
-+}
-+
-+static void ixp4xx_phy_start(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ port->speed = 0; /* force "link up" message */
-+ phy_start(port->phydev);
-+}
-+
-+static void ixp4xx_phy_stop(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ phy_stop(port->phydev);
-+}
-
- static inline void debug_pkt(struct net_device *dev, const char *func,
- u8 *data, int len)
-@@ -1242,8 +1287,7 @@ static int eth_open(struct net_device *d
- return err;
- }
-
-- port->speed = 0; /* force "link up" message */
-- phy_start(dev->phydev);
-+ ixp4xx_phy_start(dev);
-
- for (i = 0; i < ETH_ALEN; i++)
- __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
-@@ -1364,7 +1408,7 @@ static int eth_close(struct net_device *
- printk(KERN_CRIT "%s: unable to disable loopback\n",
- dev->name);
-
-- phy_stop(dev->phydev);
-+ ixp4xx_phy_stop(dev);
-
- if (!ports_open)
- qmgr_disable_irq(TXDONE_QUEUE);
-@@ -1391,7 +1435,6 @@ static int eth_init_one(struct platform_
- struct eth_plat_info *plat = dev_get_platdata(&pdev->dev);
- struct phy_device *phydev = NULL;
- u32 regs_phys;
-- char phy_id[MII_BUS_ID_SIZE + 3];
- int err;
-
- if (!(dev = alloc_etherdev(sizeof(struct port))))
-@@ -1449,16 +1492,9 @@ static int eth_init_one(struct platform_
- __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
- udelay(50);
-
-- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
-- mdio_bus->id, plat->phy);
-- phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
-- PHY_INTERFACE_MODE_MII);
-- if (IS_ERR(phydev)) {
-- err = PTR_ERR(phydev);
-+ err = ixp4xx_phy_connect(dev);
-+ if (err)
- goto err_free_mem;
-- }
--
-- phydev->irq = PHY_POLL;
-
- if ((err = register_netdev(dev)))
- goto err_phy_dis;
-@@ -1469,7 +1505,7 @@ static int eth_init_one(struct platform_
- return 0;
-
- err_phy_dis:
-- phy_disconnect(phydev);
-+ ixp4xx_phy_disconnect(phydev);
- err_free_mem:
- npe_port_tab[NPE_ID(port->id)] = NULL;
- release_resource(port->mem_res);
-@@ -1487,7 +1523,7 @@ static int eth_remove_one(struct platfor
- struct port *port = netdev_priv(dev);
-
- unregister_netdev(dev);
-- phy_disconnect(phydev);
-+ ixp4xx_phy_disconnect(phydev);
- npe_port_tab[NPE_ID(port->id)] = NULL;
- npe_release(port->npe);
- release_resource(port->mem_res);
diff --git a/target/linux/ixp4xx/patches-4.9/206-npe_driver_add_update_link_function.patch b/target/linux/ixp4xx/patches-4.9/206-npe_driver_add_update_link_function.patch
deleted file mode 100644
index e12764e053..0000000000
--- a/target/linux/ixp4xx/patches-4.9/206-npe_driver_add_update_link_function.patch
+++ /dev/null
@@ -1,100 +0,0 @@
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -171,12 +171,13 @@ struct port {
- struct npe *npe;
- struct net_device *netdev;
- struct napi_struct napi;
-+ struct phy_device *phydev;
- struct eth_plat_info *plat;
- buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
- struct desc *desc_tab; /* coherent */
- u32 desc_tab_phys;
- int id; /* logical port ID */
-- int speed, duplex;
-+ int link, speed, duplex;
- u8 firmware[4];
- int hwts_tx_en;
- int hwts_rx_en;
-@@ -558,36 +559,46 @@ static void ixp4xx_mdio_remove(void)
- }
-
-
--static void ixp4xx_adjust_link(struct net_device *dev)
-+static void ixp4xx_update_link(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-- struct phy_device *phydev = dev->phydev;
--
-- if (!phydev->link) {
-- if (port->speed) {
-- port->speed = 0;
-- printk(KERN_INFO "%s: link down\n", dev->name);
-- }
-- return;
-- }
--
-- if (port->speed == phydev->speed && port->duplex == phydev->duplex)
-- return;
--
-- port->speed = phydev->speed;
-- port->duplex = phydev->duplex;
-
-- if (port->duplex)
-+ if (port->duplex == DUPLEX_FULL)
- __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
- &port->regs->tx_control[0]);
- else
- __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
- &port->regs->tx_control[0]);
-
-+ netif_carrier_on(dev);
- printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
- dev->name, port->speed, port->duplex ? "full" : "half");
- }
-
-+static void ixp4xx_adjust_link(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct phy_device *phydev = port->phydev;
-+ int status_change = 0;
-+
-+ if (phydev->link) {
-+ if (port->duplex != phydev->duplex
-+ || port->speed != phydev->speed) {
-+ status_change = 1;
-+ }
-+ }
-+
-+ if (phydev->link != port->link)
-+ status_change = 1;
-+
-+ port->link = phydev->link;
-+ port->speed = phydev->speed;
-+ port->duplex = phydev->duplex;
-+
-+ if (status_change)
-+ ixp4xx_update_link(dev);
-+}
-+
- static int ixp4xx_phy_connect(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-@@ -623,7 +634,6 @@ static void ixp4xx_phy_start(struct net_
- {
- struct port *port = netdev_priv(dev);
-
-- port->speed = 0; /* force "link up" message */
- phy_start(port->phydev);
- }
-
-@@ -1499,6 +1509,10 @@ static int eth_init_one(struct platform_
- if ((err = register_netdev(dev)))
- goto err_phy_dis;
-
-+ port->link = 0;
-+ port->speed = 0;
-+ port->duplex = -1;
-+
- printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
- npe_name(port->npe));
-
diff --git a/target/linux/ixp4xx/patches-4.9/207-npe_driver_multiphy_support.patch b/target/linux/ixp4xx/patches-4.9/207-npe_driver_multiphy_support.patch
deleted file mode 100644
index a23644a167..0000000000
--- a/target/linux/ixp4xx/patches-4.9/207-npe_driver_multiphy_support.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-TODO: take care of additional PHYs through the PHY abstraction layer
-
---- a/arch/arm/mach-ixp4xx/include/mach/platform.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
-@@ -95,12 +95,23 @@ struct ixp4xx_pata_data {
- #define IXP4XX_ETH_NPEB 0x10
- #define IXP4XX_ETH_NPEC 0x20
-
-+#define IXP4XX_ETH_PHY_MAX_ADDR 32
-+
- /* Information about built-in Ethernet MAC interfaces */
- struct eth_plat_info {
- u8 phy; /* MII PHY ID, 0 - 31 */
- u8 rxq; /* configurable, currently 0 - 31 only */
- u8 txreadyq;
- u8 hwaddr[6];
-+
-+ u32 phy_mask;
-+#if 0
-+ int speed;
-+ int duplex;
-+#else
-+ int speed_10;
-+ int half_duplex;
-+#endif
- };
-
- /* Information about built-in HSS (synchronous serial) interfaces */
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -605,6 +605,37 @@ static int ixp4xx_phy_connect(struct net
- struct eth_plat_info *plat = port->plat;
- char phy_id[MII_BUS_ID_SIZE + 3];
-
-+ if (plat->phy == IXP4XX_ETH_PHY_MAX_ADDR) {
-+#if 0
-+ switch (plat->speed) {
-+ case SPEED_10:
-+ case SPEED_100:
-+ break;
-+ default:
-+ printk(KERN_ERR "%s: invalid speed (%d)\n",
-+ dev->name, plat->speed);
-+ return -EINVAL;
-+ }
-+
-+ switch (plat->duplex) {
-+ case DUPLEX_HALF:
-+ case DUPLEX_FULL:
-+ break;
-+ default:
-+ printk(KERN_ERR "%s: invalid duplex mode (%d)\n",
-+ dev->name, plat->duplex);
-+ return -EINVAL;
-+ }
-+ port->speed = plat->speed;
-+ port->duplex = plat->duplex;
-+#else
-+ port->speed = plat->speed_10 ? SPEED_10 : SPEED_100;
-+ port->duplex = plat->half_duplex ? DUPLEX_HALF : DUPLEX_FULL;
-+#endif
-+
-+ return 0;
-+ }
-+
- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
- mdio_bus->id, plat->phy);
- port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
-@@ -627,21 +658,32 @@ static void ixp4xx_phy_disconnect(struct
- {
- struct port *port = netdev_priv(dev);
-
-- phy_disconnect(port->phydev);
-+ if (port->phydev)
-+ phy_disconnect(port->phydev);
- }
-
- static void ixp4xx_phy_start(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-
-- phy_start(port->phydev);
-+ if (port->phydev) {
-+ phy_start(port->phydev);
-+ } else {
-+ port->link = 1;
-+ ixp4xx_update_link(dev);
-+ }
- }
-
- static void ixp4xx_phy_stop(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-
-- phy_stop(port->phydev);
-+ if (port->phydev) {
-+ phy_stop(port->phydev);
-+ } else {
-+ port->link = 0;
-+ ixp4xx_update_link(dev);
-+ }
- }
-
- static inline void debug_pkt(struct net_device *dev, const char *func,
-@@ -1030,6 +1072,8 @@ static void eth_set_mcast_list(struct ne
-
- static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
- {
-+ struct port *port = netdev_priv(dev);
-+
- if (!netif_running(dev))
- return -EINVAL;
-
-@@ -1040,6 +1084,9 @@ static int eth_ioctl(struct net_device *
- return hwtstamp_get(dev, req);
- }
-
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_mii_ioctl(dev->phydev, req, cmd);
- }
-
-@@ -1059,6 +1106,11 @@ static void ixp4xx_get_drvinfo(struct ne
-
- static int ixp4xx_nway_reset(struct net_device *dev)
- {
-+ struct port *port = netdev_priv(dev);
-+
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_start_aneg(dev->phydev);
- }
-
-@@ -1519,7 +1571,7 @@ static int eth_init_one(struct platform_
- return 0;
-
- err_phy_dis:
-- ixp4xx_phy_disconnect(phydev);
-+ ixp4xx_phy_disconnect(port->netdev);
- err_free_mem:
- npe_port_tab[NPE_ID(port->id)] = NULL;
- release_resource(port->mem_res);
-@@ -1537,7 +1589,7 @@ static int eth_remove_one(struct platfor
- struct port *port = netdev_priv(dev);
-
- unregister_netdev(dev);
-- ixp4xx_phy_disconnect(phydev);
-+ ixp4xx_phy_disconnect(port->netdev);
- npe_port_tab[NPE_ID(port->id)] = NULL;
- npe_release(port->npe);
- release_resource(port->mem_res);
diff --git a/target/linux/ixp4xx/patches-4.9/295-latch_led_driver.patch b/target/linux/ixp4xx/patches-4.9/295-latch_led_driver.patch
deleted file mode 100644
index 66bc3e86b0..0000000000
--- a/target/linux/ixp4xx/patches-4.9/295-latch_led_driver.patch
+++ /dev/null
@@ -1,201 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -312,6 +312,12 @@ config LEDS_LP8860
- on the LP8860 4 channel LED driver using the I2C communication
- bus.
-
-+config LEDS_LATCH
-+ tristate "LED Support for Memory Latched LEDs"
-+ depends on LEDS_CLASS
-+ help
-+ -- To Do --
-+
- config LEDS_CLEVO_MAIL
- tristate "Mail LED on Clevo notebook"
- depends on LEDS_CLASS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -25,6 +25,7 @@ obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunf
- obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
- obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
- obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
-+obj-$(CONFIG_LEDS_LATCH) += leds-latch.o
- obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
- obj-$(CONFIG_LEDS_LP3952) += leds-lp3952.o
- obj-$(CONFIG_LEDS_LP55XX_COMMON) += leds-lp55xx-common.o
---- /dev/null
-+++ b/drivers/leds/leds-latch.c
-@@ -0,0 +1,152 @@
-+/*
-+ * LEDs driver for Memory Latched Devices
-+ *
-+ * Copyright (C) 2008 Gateworks Corp.
-+ * Chris Lang <clang at gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/workqueue.h>
-+#include <asm/io.h>
-+#include <linux/spinlock.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/export.h>
-+
-+static unsigned int mem_keep = 0xFF;
-+static spinlock_t mem_lock;
-+static unsigned char *iobase;
-+
-+struct latch_led_data {
-+ struct led_classdev cdev;
-+ struct work_struct work;
-+ u8 new_level;
-+ u8 bit;
-+ void (*set_led)(u8 bit, enum led_brightness value);
-+};
-+
-+static void latch_set_led(u8 bit, enum led_brightness value)
-+{
-+ if (value == LED_OFF)
-+ mem_keep |= (0x1 << bit);
-+ else
-+ mem_keep &= ~(0x1 << bit);
-+
-+ writeb(mem_keep, iobase);
-+}
-+
-+static void latch_led_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ struct latch_led_data *led_dat =
-+ container_of(led_cdev, struct latch_led_data, cdev);
-+
-+ raw_spin_lock(mem_lock);
-+
-+ led_dat->set_led(led_dat->bit, value);
-+
-+ raw_spin_unlock(mem_lock);
-+}
-+
-+static int latch_led_probe(struct platform_device *pdev)
-+{
-+ struct latch_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct latch_led *cur_led;
-+ struct latch_led_data *leds_data, *led_dat;
-+ int i, ret = 0;
-+
-+ if (!pdata)
-+ return -EBUSY;
-+
-+ leds_data = kzalloc(sizeof(struct latch_led_data) * pdata->num_leds,
-+ GFP_KERNEL);
-+ if (!leds_data)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ cur_led = &pdata->leds[i];
-+ led_dat = &leds_data[i];
-+
-+ led_dat->cdev.name = cur_led->name;
-+ led_dat->cdev.default_trigger = cur_led->default_trigger;
-+ led_dat->cdev.brightness_set = latch_led_set;
-+ led_dat->cdev.brightness = LED_OFF;
-+ led_dat->bit = cur_led->bit;
-+ led_dat->set_led = pdata->set_led ? pdata->set_led : latch_set_led;
-+
-+ ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
-+ if (ret < 0) {
-+ goto err;
-+ }
-+ }
-+
-+ if (!pdata->set_led) {
-+ iobase = ioremap_nocache(pdata->mem, 0x1000);
-+ writeb(0xFF, iobase);
-+ }
-+ platform_set_drvdata(pdev, leds_data);
-+
-+ return 0;
-+
-+err:
-+ if (i > 0) {
-+ for (i = i - 1; i >= 0; i--) {
-+ led_classdev_unregister(&leds_data[i].cdev);
-+ }
-+ }
-+
-+ kfree(leds_data);
-+
-+ return ret;
-+}
-+
-+static int latch_led_remove(struct platform_device *pdev)
-+{
-+ int i;
-+ struct latch_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct latch_led_data *leds_data;
-+
-+ leds_data = platform_get_drvdata(pdev);
-+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ led_classdev_unregister(&leds_data[i].cdev);
-+ cancel_work_sync(&leds_data[i].work);
-+ }
-+
-+ kfree(leds_data);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver latch_led_driver = {
-+ .probe = latch_led_probe,
-+ .remove = latch_led_remove,
-+ .driver = {
-+ .name = "leds-latch",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init latch_led_init(void)
-+{
-+ return platform_driver_register(&latch_led_driver);
-+}
-+
-+static void __exit latch_led_exit(void)
-+{
-+ platform_driver_unregister(&latch_led_driver);
-+}
-+
-+module_init(latch_led_init);
-+module_exit(latch_led_exit);
-+
-+MODULE_AUTHOR("Chris Lang <clang at gateworks.com>");
-+MODULE_DESCRIPTION("Latch LED driver");
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -423,4 +423,18 @@ static inline void ledtrig_cpu(enum cpu_
- }
- #endif
-
-+/* For the leds-latch driver */
-+struct latch_led {
-+ const char *name;
-+ char *default_trigger;
-+ unsigned bit;
-+};
-+
-+struct latch_led_platform_data {
-+ int num_leds;
-+ u32 mem;
-+ struct latch_led *leds;
-+ void (*set_led)(u8 bit, enum led_brightness value);
-+};
-+
- #endif /* __LINUX_LEDS_H_INCLUDED */
diff --git a/target/linux/ixp4xx/patches-4.9/300-avila_support.patch b/target/linux/ixp4xx/patches-4.9/300-avila_support.patch
deleted file mode 100644
index c801607f4b..0000000000
--- a/target/linux/ixp4xx/patches-4.9/300-avila_support.patch
+++ /dev/null
@@ -1,726 +0,0 @@
---- a/arch/arm/mach-ixp4xx/avila-pci.c
-+++ b/arch/arm/mach-ixp4xx/avila-pci.c
-@@ -27,8 +27,8 @@
- #include <mach/hardware.h>
- #include <asm/mach-types.h>
-
--#define AVILA_MAX_DEV 4
--#define LOFT_MAX_DEV 6
-+#define AVILA_MAX_DEV 6
-+
- #define IRQ_LINES 4
-
- /* PCI controller GPIO to IRQ pin mappings */
-@@ -55,10 +55,8 @@ static int __init avila_map_irq(const st
- IXP4XX_GPIO_IRQ(INTD)
- };
-
-- if (slot >= 1 &&
-- slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) &&
-- pin >= 1 && pin <= IRQ_LINES)
-- return pci_irq_table[(slot + pin - 2) % 4];
-+ if (slot >= 1 && slot <= AVILA_MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-+ return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
-
- return -1;
- }
---- a/arch/arm/mach-ixp4xx/avila-setup.c
-+++ b/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -14,9 +14,16 @@
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/device.h>
-+#include <linux/if_ether.h>
-+#include <linux/socket.h>
-+#include <linux/netdevice.h>
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/i2c.h>
-+#include <linux/platform_data/at24.h>
-+#include <linux/leds.h>
-+#include <linux/platform_data/pca953x.h>
- #include <linux/i2c-gpio.h>
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -26,10 +33,25 @@
- #include <asm/irq.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-+#include <linux/irq.h>
-
- #define AVILA_SDA_PIN 7
- #define AVILA_SCL_PIN 6
-
-+/* User LEDs */
-+#define AVILA_GW23XX_LED_USER_GPIO 3
-+#define AVILA_GW23X7_LED_USER_GPIO 4
-+
-+/* gpio mask used by platform device */
-+#define AVILA_GPIO_MASK (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7) | (1 << 9)
-+
-+struct avila_board_info {
-+ unsigned char *model;
-+ void (*setup)(void);
-+};
-+
-+static struct avila_board_info *avila_info __initdata;
-+
- static struct flash_platform_data avila_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-@@ -105,14 +127,69 @@ static struct platform_device avila_uart
- .resource = avila_uart_resources
- };
-
--static struct resource avila_pata_resources[] = {
-+static struct resource avila_optional_uart_resources[] = {
- {
-- .flags = IORESOURCE_MEM
-- },
-+ .start = 0x54000000,
-+ .end = 0x54000fff,
-+ .flags = IORESOURCE_MEM
-+ },{
-+ .start = 0x55000000,
-+ .end = 0x55000fff,
-+ .flags = IORESOURCE_MEM
-+ },{
-+ .start = 0x56000000,
-+ .end = 0x56000fff,
-+ .flags = IORESOURCE_MEM
-+ },{
-+ .start = 0x57000000,
-+ .end = 0x57000fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port avila_optional_uart_data[] = {
- {
-- .flags = IORESOURCE_MEM,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ .rw_delay = 2,
-+ },{
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ .rw_delay = 2,
-+ },{
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ .rw_delay = 2,
-+ },{
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ .rw_delay = 2,
- },
-+ { }
-+};
-+
-+static struct platform_device avila_optional_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM1,
-+ .dev.platform_data = avila_optional_uart_data,
-+ .num_resources = 4,
-+ .resource = avila_optional_uart_resources,
-+};
-+
-+static struct resource avila_pata_resources[] = {
- {
-+ .flags = IORESOURCE_MEM
-+ },{
-+ .flags = IORESOURCE_MEM,
-+ },{
- .name = "intrq",
- .start = IRQ_IXP4XX_GPIO12,
- .end = IRQ_IXP4XX_GPIO12,
-@@ -133,21 +210,237 @@ static struct platform_device avila_pata
- .resource = avila_pata_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info avila_npeb_data = {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct eth_plat_info avila_npec_data = {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct platform_device avila_npeb_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &avila_npeb_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+};
-+
-+static struct platform_device avila_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &avila_npec_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+};
-+
-+static struct gpio_led avila_gpio_leds[] = {
-+ {
-+ .name = "user", /* green led */
-+ .gpio = AVILA_GW23XX_LED_USER_GPIO,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "radio1", /* green led */
-+ .gpio = 104,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "radio2", /* green led */
-+ .gpio = 105,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "radio3", /* green led */
-+ .gpio = 106,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "radio4", /* green led */
-+ .gpio = 107,
-+ .active_low = 1,
-+ },
-+
-+};
-+
-+static struct gpio_led_platform_data avila_gpio_leds_data = {
-+ .num_leds = 1,
-+ .leds = avila_gpio_leds,
-+};
-+
-+static struct platform_device avila_gpio_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &avila_gpio_leds_data,
-+};
-+
-+static struct latch_led avila_latch_leds[] = {
-+ {
-+ .name = "led0", /* green led */
-+ .bit = 0,
-+ },
-+ {
-+ .name = "led1", /* green led */
-+ .bit = 1,
-+ },
-+ {
-+ .name = "led2", /* green led */
-+ .bit = 2,
-+ },
-+ {
-+ .name = "led3", /* green led */
-+ .bit = 3,
-+ },
-+ {
-+ .name = "led4", /* green led */
-+ .bit = 4,
-+ },
-+ {
-+ .name = "led5", /* green led */
-+ .bit = 5,
-+ },
-+ {
-+ .name = "led6", /* green led */
-+ .bit = 6,
-+ },
-+ {
-+ .name = "led7", /* green led */
-+ .bit = 7,
-+ }
-+};
-+
-+static struct latch_led_platform_data avila_latch_leds_data = {
-+ .num_leds = 8,
-+ .leds = avila_latch_leds,
-+ .mem = 0x51000000,
-+};
-+
-+static struct platform_device avila_latch_leds_device = {
-+ .name = "leds-latch",
-+ .id = -1,
-+ .dev.platform_data = &avila_latch_leds_data,
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_gpio,
-- &avila_flash,
- &avila_uart
- };
-
--static void __init avila_init(void)
-+/*
-+ * Audio Devices
-+ */
-+
-+static struct platform_device avila_hss_device[] = {
-+ {
-+ .name = "gw_avila_hss",
-+ .id = 0,
-+ },{
-+ .name = "gw_avila_hss",
-+ .id = 1,
-+ },{
-+ .name = "gw_avila_hss",
-+ .id = 2,
-+ },{
-+ .name = "gw_avila_hss",
-+ .id = 3,
-+ },
-+};
-+
-+static struct platform_device avila_pcm_device[] = {
-+ {
-+ .name = "gw_avila-audio",
-+ .id = 0,
-+ },{
-+ .name = "gw_avila-audio",
-+ .id = 1,
-+ },{
-+ .name = "gw_avila-audio",
-+ .id = 2,
-+ },{
-+ .name = "gw_avila-audio",
-+ .id = 3,
-+ }
-+};
-+
-+static void setup_audio_devices(void) {
-+ platform_device_register(&avila_hss_device[0]);
-+ platform_device_register(&avila_hss_device[1]);
-+ platform_device_register(&avila_hss_device[2]);
-+ platform_device_register(&avila_hss_device[3]);
-+
-+ platform_device_register(&avila_pcm_device[0]);
-+ platform_device_register(&avila_pcm_device[1]);
-+ platform_device_register(&avila_pcm_device[2]);
-+ platform_device_register(&avila_pcm_device[3]);
-+}
-+
-+static void __init avila_gw23xx_setup(void)
- {
-- ixp4xx_sys_init();
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-
-- avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-- avila_flash_resource.end =
-- IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+ platform_device_register(&avila_gpio_leds_device);
-+}
-
-- platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
-+static void __init avila_gw2342_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-+ avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-+
-+ avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-+ avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-+
-+ avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-+ avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-+
-+ platform_device_register(&avila_pata);
-+}
-+
-+static void __init avila_gw2345_setup(void)
-+{
-+ avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
-+ platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-+ avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-+
-+ avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-+ avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-+
-+ avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-+ avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-+
-+ platform_device_register(&avila_pata);
-+}
-+
-+static void __init avila_gw2347_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+ platform_device_register(&avila_gpio_leds_device);
-+}
-+
-+static void __init avila_gw2348_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
-
- avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
- avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-@@ -159,8 +452,335 @@ static void __init avila_init(void)
- avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-
- platform_device_register(&avila_pata);
-+}
-+
-+static void __init avila_gw2353_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_gpio_leds_device);
-+}
-+
-+static void __init avila_gw2355_setup(void)
-+{
-+ avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 16;
-+ platform_device_register(&avila_npec_device);
-+
-+ avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ *IXP4XX_EXP_CS4 |= 0xbfff3c03;
-+ avila_latch_leds[0].name = "RXD";
-+ avila_latch_leds[1].name = "TXD";
-+ avila_latch_leds[2].name = "POL";
-+ avila_latch_leds[3].name = "LNK";
-+ avila_latch_leds[4].name = "ERR";
-+ avila_latch_leds_data.num_leds = 5;
-+ avila_latch_leds_data.mem = 0x54000000;
-+ platform_device_register(&avila_latch_leds_device);
-+
-+ avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-+ avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-+
-+ avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-+ avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-+
-+ avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-+ avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-+
-+ platform_device_register(&avila_pata);
-+}
-+
-+static void __init avila_gw2357_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ *IXP4XX_EXP_CS1 |= 0xbfff3c03;
-+ platform_device_register(&avila_latch_leds_device);
-+}
-+
-+static void __init avila_gw2365_setup(void)
-+{
-+ avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS4 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[0].mapbase = 0x54000000;
-+ avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x54000000, 0x0fff);
-+ avila_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO0;
-+
-+ *IXP4XX_EXP_CS5 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[1].mapbase = 0x55000000;
-+ avila_optional_uart_data[1].membase = (void __iomem *)ioremap(0x55000000, 0x0fff);
-+ avila_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO1;
-+
-+ *IXP4XX_EXP_CS6 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[2].mapbase = 0x56000000;
-+ avila_optional_uart_data[2].membase = (void __iomem *)ioremap(0x56000000, 0x0fff);
-+ avila_optional_uart_data[2].irq = IRQ_IXP4XX_GPIO2;
-+
-+ *IXP4XX_EXP_CS7 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[3].mapbase = 0x57000000;
-+ avila_optional_uart_data[3].membase = (void __iomem *)ioremap(0x57000000, 0x0fff);
-+ avila_optional_uart_data[3].irq = IRQ_IXP4XX_GPIO3;
-+
-+ platform_device_register(&avila_optional_uart);
-+
-+ avila_npeb_data.phy = 1;
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 2;
-+ platform_device_register(&avila_npec_device);
-+
-+ avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
-+ avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
-+
-+ avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
-+ avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
-+
-+ avila_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
-+ avila_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+
-+ platform_device_register(&avila_pata);
-+
-+ avila_gpio_leds[0].gpio = 109;
-+ avila_gpio_leds_data.num_leds = 5;
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ setup_audio_devices();
-+}
-+
-+static void __init avila_gw2369_setup(void)
-+{
-+ avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ avila_npeb_data.phy = 1;
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 2;
-+ platform_device_register(&avila_npec_device);
-+
-+ setup_audio_devices();
-+}
-+
-+static void __init avila_gw2370_setup(void)
-+{
-+ avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ avila_npeb_data.phy = 5;
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ avila_npec_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+ platform_device_register(&avila_npec_device);
-+
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[0].mapbase = 0x52000000;
-+ avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
-+ avila_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO2;
-+
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[1].mapbase = 0x53000000;
-+ avila_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53000000, 0x0fff);
-+ avila_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO3;
-+
-+ avila_optional_uart.num_resources = 2;
-+
-+ platform_device_register(&avila_optional_uart);
-+
-+ avila_gpio_leds[0].gpio = 101;
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ setup_audio_devices();
-+}
-+
-+static void __init avila_gw2375_setup(void)
-+{
-+ avila_npeb_data.phy = 1;
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 2;
-+ platform_device_register(&avila_npec_device);
-+
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[0].mapbase = 0x52000000;
-+ avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
-+ avila_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO10;
-+
-+ avila_optional_uart.num_resources = 1;
-+
-+ platform_device_register(&avila_optional_uart);
-+
-+ setup_audio_devices();
-+}
-+
-+
-+static struct avila_board_info avila_boards[] __initdata = {
-+ {
-+ .model = "GW2342",
-+ .setup = avila_gw2342_setup,
-+ }, {
-+ .model = "GW2345",
-+ .setup = avila_gw2345_setup,
-+ }, {
-+ .model = "GW2347",
-+ .setup = avila_gw2347_setup,
-+ }, {
-+ .model = "GW2348",
-+ .setup = avila_gw2348_setup,
-+ }, {
-+ .model = "GW2353",
-+ .setup = avila_gw2353_setup,
-+ }, {
-+ .model = "GW2355",
-+ .setup = avila_gw2355_setup,
-+ }, {
-+ .model = "GW2357",
-+ .setup = avila_gw2357_setup,
-+ }, {
-+ .model = "GW2365",
-+ .setup = avila_gw2365_setup,
-+ }, {
-+ .model = "GW2369",
-+ .setup = avila_gw2369_setup,
-+ }, {
-+ .model = "GW2370",
-+ .setup = avila_gw2370_setup,
-+ }, {
-+ .model = "GW2373",
-+ .setup = avila_gw2369_setup,
-+ }, {
-+ .model = "GW2375",
-+ .setup = avila_gw2375_setup,
-+ }
-+};
-+
-+static struct avila_board_info * __init avila_find_board_info(char *model)
-+{
-+ int i;
-+ model[6] = '\0';
-+
-+ for (i = 0; i < ARRAY_SIZE(avila_boards); i++) {
-+ struct avila_board_info *info = &avila_boards[i];
-+ if (strcmp(info->model, model) == 0)
-+ return info;
-+ }
-+
-+ return NULL;
-+}
-+
-+static struct nvmem_device *at24_nvmem;
-+
-+static void at24_setup(struct nvmem_device *mem_acc, void *context)
-+{
-+ char mac_addr[ETH_ALEN];
-+ char model[7];
-+
-+ at24_nvmem = mem_acc;
-+
-+ /* Read MAC addresses */
-+ if (nvmem_device_read(at24_nvmem, 0x0, 6, mac_addr) == 6) {
-+ memcpy(&avila_npeb_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+ if (nvmem_device_read(at24_nvmem, 0x6, 6, mac_addr) == 6) {
-+ memcpy(&avila_npec_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+
-+ /* Read the first 6 bytes of the model number */
-+ if (nvmem_device_read(at24_nvmem, 0x20, 6, model) == 6) {
-+ avila_info = avila_find_board_info(model);
-+ }
-+
-+}
-+
-+static struct at24_platform_data avila_eeprom_info = {
-+ .byte_len = 1024,
-+ .page_size = 16,
-+// .flags = AT24_FLAG_READONLY,
-+ .setup = at24_setup,
-+};
-+
-+static struct pca953x_platform_data avila_pca_data = {
-+ .gpio_base = 100,
-+};
-+
-+static struct i2c_board_info __initdata avila_i2c_board_info[] = {
-+ {
-+ I2C_BOARD_INFO("ds1672", 0x68),
-+ },
-+ {
-+ I2C_BOARD_INFO("gsp", 0x29),
-+ },
-+ {
-+ I2C_BOARD_INFO("pca9555", 0x23),
-+ .platform_data = &avila_pca_data,
-+ },
-+ {
-+ I2C_BOARD_INFO("ad7418", 0x28),
-+ },
-+ {
-+ I2C_BOARD_INFO("24c08", 0x51),
-+ .platform_data = &avila_eeprom_info
-+ },
-+ {
-+ I2C_BOARD_INFO("tlv320aic33", 0x1b),
-+ },
-+ {
-+ I2C_BOARD_INFO("tlv320aic33", 0x1a),
-+ },
-+ {
-+ I2C_BOARD_INFO("tlv320aic33", 0x19),
-+ },
-+ {
-+ I2C_BOARD_INFO("tlv320aic33", 0x18),
-+ },
-+};
-+
-+static void __init avila_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
-+
-+ i2c_register_board_info(0, avila_i2c_board_info,
-+ ARRAY_SIZE(avila_i2c_board_info));
-+}
-+
-+static int __init avila_model_setup(void)
-+{
-+ if (!machine_is_avila())
-+ return 0;
-+
-+ /* default 16MB flash */
-+ avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
-+
-+ if (avila_info) {
-+ printk(KERN_DEBUG "Running on Gateworks Avila %s\n",
-+ avila_info->model);
-+ avila_info->setup();
-+ } else {
-+ printk(KERN_INFO "Unknown/missing Avila model number"
-+ " -- defaults will be used\n");
-+ avila_gw23xx_setup();
-+ }
-+ platform_device_register(&avila_flash);
-
-+ return 0;
- }
-+late_initcall(avila_model_setup);
-
- MACHINE_START(AVILA, "Gateworks Avila Network Platform")
- /* Maintainer: Deepak Saxena <dsaxena at plexity.net> */
diff --git a/target/linux/ixp4xx/patches-4.9/304-ixp4xx_eth_jumboframe.patch b/target/linux/ixp4xx/patches-4.9/304-ixp4xx_eth_jumboframe.patch
deleted file mode 100644
index 108fbcb37a..0000000000
--- a/target/linux/ixp4xx/patches-4.9/304-ixp4xx_eth_jumboframe.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -57,7 +57,7 @@
-
- #define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
- #define REGS_SIZE 0x1000
--#define MAX_MRU 1536 /* 0x600 */
-+#define MAX_MRU (14320 - ETH_HLEN - ETH_FCS_LEN)
- #define RX_BUFF_SIZE ALIGN((NET_IP_ALIGN) + MAX_MRU, 4)
-
- #define NAPI_WEIGHT 16
-@@ -1289,6 +1289,32 @@ static void destroy_queues(struct port *
- }
- }
-
-+static int eth_do_change_mtu(struct net_device *dev, int mtu)
-+{
-+ struct port *port;
-+ struct msg msg;
-+ /* adjust for ethernet headers */
-+ int framesize = mtu + ETH_HLEN + ETH_FCS_LEN;
-+
-+ port = netdev_priv(dev);
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = NPE_SETMAXFRAMELENGTHS;
-+ msg.eth_id = port->id;
-+
-+ /* max rx/tx 64 byte blocks */
-+ msg.byte2 = ((framesize + 63) / 64) << 8;
-+ msg.byte3 = ((framesize + 63) / 64) << 8;
-+
-+ msg.byte4 = msg.byte6 = framesize >> 8;
-+ msg.byte5 = msg.byte7 = framesize & 0xff;
-+
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAX_FRAME_LENGTH"))
-+ return -EIO;
-+
-+ return 0;
-+}
-+
- static int eth_open(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-@@ -1340,6 +1366,8 @@ static int eth_open(struct net_device *d
- if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
- return -EIO;
-
-+ eth_do_change_mtu(dev, dev->mtu);
-+
- if ((err = request_queues(port)) != 0)
- return err;
-
-@@ -1479,7 +1507,26 @@ static int eth_close(struct net_device *
- return 0;
- }
-
-+static int ixp_eth_change_mtu(struct net_device *dev, int mtu)
-+{
-+ int ret;
-+
-+ if (mtu > MAX_MRU)
-+ return -EINVAL;
-+
-+ if (dev->flags & IFF_UP) {
-+ ret = eth_do_change_mtu(dev, mtu);
-+ if (ret < 0)
-+ return ret;
-+ }
-+
-+ dev->mtu = mtu;
-+
-+ return 0;
-+}
-+
- static const struct net_device_ops ixp4xx_netdev_ops = {
-+ .ndo_change_mtu = ixp_eth_change_mtu,
- .ndo_open = eth_open,
- .ndo_stop = eth_close,
- .ndo_start_xmit = eth_xmit,
diff --git a/target/linux/ixp4xx/patches-4.9/310-gtwx5717_spi_bus.patch b/target/linux/ixp4xx/patches-4.9/310-gtwx5717_spi_bus.patch
deleted file mode 100644
index 51f3f14510..0000000000
--- a/target/linux/ixp4xx/patches-4.9/310-gtwx5717_spi_bus.patch
+++ /dev/null
@@ -1,57 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-@@ -27,6 +27,8 @@
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_gpio.h>
- #include <asm/types.h>
- #include <asm/setup.h>
- #include <asm/memory.h>
-@@ -146,9 +148,37 @@ static struct platform_device gtwx5715_f
- .resource = >wx5715_flash_resource,
- };
-
-+static struct spi_gpio_platform_data gtwx5715_spi_platform_data = {
-+ .sck = GTWX5715_KSSPI_CLOCK,
-+ .mosi = GTWX5715_KSSPI_TXD,
-+ .miso = GTWX5715_KSSPI_RXD,
-+ .num_chipselect = 1,
-+};
-+
-+static struct platform_device gtwx5715_spi_device = {
-+ .name = "spi_gpio",
-+ .id = 1,
-+ .dev = {
-+ .platform_data = >wx5715_spi_platform_data,
-+ }
-+};
-+
-+static struct spi_board_info gtwx5715_spi_devices[] __initdata = {
-+ {
-+ .modalias = "spi-ks8995",
-+ .max_speed_hz = 5000000,
-+ .mode = SPI_MODE_0,
-+ .bus_num = 1,
-+ .chip_select = 0,
-+ .controller_data = (void *)GTWX5715_KSSPI_SELECT,
-+ }
-+};
-+
-+
- static struct platform_device *gtwx5715_devices[] __initdata = {
- >wx5715_uart_device,
- >wx5715_flash,
-+ >wx5715_spi_device,
- };
-
- static void __init gtwx5715_init(void)
-@@ -158,6 +188,7 @@ static void __init gtwx5715_init(void)
- gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
-
-+ spi_register_board_info(gtwx5715_spi_devices, ARRAY_SIZE(gtwx5715_spi_devices));
- platform_add_devices(gtwx5715_devices, ARRAY_SIZE(gtwx5715_devices));
- }
-
diff --git a/target/linux/ixp4xx/patches-4.9/311-gtwx5717_mac_plat_info.patch b/target/linux/ixp4xx/patches-4.9/311-gtwx5717_mac_plat_info.patch
deleted file mode 100644
index 85a8f162c6..0000000000
--- a/target/linux/ixp4xx/patches-4.9/311-gtwx5717_mac_plat_info.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-@@ -29,6 +29,7 @@
- #include <linux/serial_8250.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/spi_gpio.h>
-+#include <linux/dma-mapping.h>
- #include <asm/types.h>
- #include <asm/setup.h>
- #include <asm/memory.h>
-@@ -174,11 +175,39 @@ static struct spi_board_info gtwx5715_sp
- }
- };
-
-+static struct eth_plat_info gtwx5715_npeb_data = {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct eth_plat_info gtwx5715_npec_data = {
-+ .phy = 5, /* port 5 of the KS8995 switch */
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct platform_device gtwx5715_npeb_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = >wx5715_npeb_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+};
-+
-+static struct platform_device gtwx5715_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = >wx5715_npec_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+};
-
- static struct platform_device *gtwx5715_devices[] __initdata = {
- >wx5715_uart_device,
- >wx5715_flash,
- >wx5715_spi_device,
-+ >wx5715_npeb_device,
-+ >wx5715_npec_device,
- };
-
- static void __init gtwx5715_init(void)
diff --git a/target/linux/ixp4xx/patches-4.9/312-ixp4xx_pata_optimization.patch b/target/linux/ixp4xx/patches-4.9/312-ixp4xx_pata_optimization.patch
deleted file mode 100644
index 59c2837f0c..0000000000
--- a/target/linux/ixp4xx/patches-4.9/312-ixp4xx_pata_optimization.patch
+++ /dev/null
@@ -1,137 +0,0 @@
---- a/drivers/ata/pata_ixp4xx_cf.c
-+++ b/drivers/ata/pata_ixp4xx_cf.c
-@@ -24,16 +24,58 @@
- #include <scsi/scsi_host.h>
-
- #define DRV_NAME "pata_ixp4xx_cf"
--#define DRV_VERSION "0.2"
-+#define DRV_VERSION "0.3"
-
- static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
- {
-+ struct ixp4xx_pata_data *data = link->ap->host->dev->platform_data;
-+ unsigned int pio_mask;
- struct ata_device *dev;
-
- ata_for_each_dev(dev, link, ENABLED) {
-- ata_dev_info(dev, "configured for PIO0\n");
-- dev->pio_mode = XFER_PIO_0;
-- dev->xfer_mode = XFER_PIO_0;
-+ if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)) {
-+ pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
-+ if (pio_mask & (1 << 1)) {
-+ pio_mask = 4;
-+ } else {
-+ pio_mask = 3;
-+ }
-+ } else {
-+ pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
-+ }
-+
-+ switch (pio_mask){
-+ case 0:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
-+ dev->pio_mode = XFER_PIO_0;
-+ dev->xfer_mode = XFER_PIO_0;
-+ *data->cs0_cfg = 0x8a473c03;
-+ break;
-+ case 1:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO1\n");
-+ dev->pio_mode = XFER_PIO_1;
-+ dev->xfer_mode = XFER_PIO_1;
-+ *data->cs0_cfg = 0x86433c03;
-+ break;
-+ case 2:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO2\n");
-+ dev->pio_mode = XFER_PIO_2;
-+ dev->xfer_mode = XFER_PIO_2;
-+ *data->cs0_cfg = 0x82413c03;
-+ break;
-+ case 3:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO3\n");
-+ dev->pio_mode = XFER_PIO_3;
-+ dev->xfer_mode = XFER_PIO_3;
-+ *data->cs0_cfg = 0x80823c03;
-+ break;
-+ case 4:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO4\n");
-+ dev->pio_mode = XFER_PIO_4;
-+ dev->xfer_mode = XFER_PIO_4;
-+ *data->cs0_cfg = 0x80403c03;
-+ break;
-+ }
- dev->xfer_shift = ATA_SHIFT_PIO;
- dev->flags |= ATA_DFLAG_PIO;
- }
-@@ -46,6 +88,7 @@ static unsigned int ixp4xx_mmio_data_xfe
- unsigned int i;
- unsigned int words = buflen >> 1;
- u16 *buf16 = (u16 *) buf;
-+ unsigned int pio_mask;
- struct ata_port *ap = dev->link->ap;
- void __iomem *mmio = ap->ioaddr.data_addr;
- struct ixp4xx_pata_data *data = dev_get_platdata(ap->host->dev);
-@@ -53,8 +96,34 @@ static unsigned int ixp4xx_mmio_data_xfe
- /* set the expansion bus in 16bit mode and restore
- * 8 bit mode after the transaction.
- */
-- *data->cs0_cfg &= ~(0x01);
-- udelay(100);
-+ if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)){
-+ pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
-+ if (pio_mask & (1 << 1)){
-+ pio_mask = 4;
-+ }else{
-+ pio_mask = 3;
-+ }
-+ }else{
-+ pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
-+ }
-+ switch (pio_mask){
-+ case 0:
-+ *data->cs0_cfg = 0xa9643c42;
-+ break;
-+ case 1:
-+ *data->cs0_cfg = 0x85033c42;
-+ break;
-+ case 2:
-+ *data->cs0_cfg = 0x80b23c42;
-+ break;
-+ case 3:
-+ *data->cs0_cfg = 0x80823c42;
-+ break;
-+ case 4:
-+ *data->cs0_cfg = 0x80403c42;
-+ break;
-+ }
-+ udelay(5);
-
- /* Transfer multiple of 2 bytes */
- if (rw == READ)
-@@ -79,8 +148,24 @@ static unsigned int ixp4xx_mmio_data_xfe
- words++;
- }
-
-- udelay(100);
-- *data->cs0_cfg |= 0x01;
-+ udelay(5);
-+ switch (pio_mask){
-+ case 0:
-+ *data->cs0_cfg = 0x8a473c03;
-+ break;
-+ case 1:
-+ *data->cs0_cfg = 0x86433c03;
-+ break;
-+ case 2:
-+ *data->cs0_cfg = 0x82413c03;
-+ break;
-+ case 3:
-+ *data->cs0_cfg = 0x80823c03;
-+ break;
-+ case 4:
-+ *data->cs0_cfg = 0x80403c03;
-+ break;
-+ }
-
- return words << 1;
- }
diff --git a/target/linux/ixp4xx/patches-4.9/500-usr8200_support.patch b/target/linux/ixp4xx/patches-4.9/500-usr8200_support.patch
deleted file mode 100644
index fb7f03ee1a..0000000000
--- a/target/linux/ixp4xx/patches-4.9/500-usr8200_support.patch
+++ /dev/null
@@ -1,347 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -93,6 +93,14 @@ config MACH_SIDEWINDER
- Engineering Sidewinder board. For more information on this
- platform, see http://www.adiengineering.com
-
-+config MACH_USR8200
-+ bool "USRobotics USR8200"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the USRobotics
-+ USR8200 router board. For more information on this platform, see
-+ http://openwrt.org
-+
- config MACH_COMPEXWP18
- bool "Compex WP18 / NP18A"
- select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -27,6 +27,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
- obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
-+obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o
-
- obj-y += common.o
-
-@@ -55,6 +56,7 @@ obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
- obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
- obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
-+obj-$(CONFIG_MACH_USR8200) += usr8200-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -44,7 +44,8 @@ static __inline__ void __arch_decomp_set
- machine_is_gateway7001() || machine_is_wg302v2() ||
- machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
- machine_is_pronghorn() || machine_is_pronghorn_metro() ||
-- machine_is_wrt300nv2() || machine_is_tw5334())
-+ machine_is_wrt300nv2() || machine_is_tw5334() ||
-+ machine_is_usr8200())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/usr8200-pci.c
-@@ -0,0 +1,77 @@
-+/*
-+ * arch/arch/mach-ixp4xx/usr8200-pci.c
-+ *
-+ * PCI setup routines for USRobotics USR8200
-+ *
-+ * Copyright (C) 2008 Peter Denison <openwrt at marshadder.org>
-+ *
-+ * based on pronghorn-pci.c
-+ * Copyright (C) 2008 Imre Kaloz <kaloz at openwrt.org>
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Peter Denison <openwrt at marshadder.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init usr8200_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init usr8200_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 14)
-+ return IRQ_IXP4XX_GPIO7;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 16) {
-+ if (pin == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (pin == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (pin == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else
-+ return -1;
-+ } else
-+ return -1;
-+}
-+
-+struct hw_pci usr8200_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = usr8200_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = usr8200_map_irq,
-+};
-+
-+int __init usr8200_pci_init(void)
-+{
-+ if (machine_is_usr8200())
-+ pci_common_init(&usr8200_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(usr8200_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
-@@ -0,0 +1,217 @@
-+/*
-+ * arch/arm/mach-ixp4xx/usr8200-setup.c
-+ *
-+ * Board setup for the USRobotics USR8200
-+ *
-+ * Copyright (C) 2008 Peter Denison <openwrt at marshadder.org>
-+ *
-+ * based on pronghorn-setup.c:
-+ * Copyright (C) 2008 Imre Kaloz <kaloz at openwrt.org>
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Peter Denison <openwrt at marshadder.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/leds.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data usr8200_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource usr8200_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device usr8200_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &usr8200_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &usr8200_flash_resource,
-+};
-+
-+static struct resource usr8200_uart_resources [] = {
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port usr8200_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device usr8200_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = usr8200_uart_data,
-+ },
-+ .num_resources = 2,
-+ .resource = usr8200_uart_resources,
-+};
-+
-+static struct gpio_led usr8200_led_pin[] = {
-+ {
-+ .name = "usr8200:usb1",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:usb2",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:ieee1394",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:internal",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:power",
-+ .gpio = 14,
-+ }
-+};
-+
-+static struct gpio_led_platform_data usr8200_led_data = {
-+ .num_leds = ARRAY_SIZE(usr8200_led_pin),
-+ .leds = usr8200_led_pin,
-+};
-+
-+static struct platform_device usr8200_led = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &usr8200_led_data,
-+};
-+
-+static struct eth_plat_info usr8200_plat_eth[] = {
-+ { /* NPEC - LAN with Marvell 88E6060 switch */
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x0F0000,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }, { /* NPEB - WAN */
-+ .phy = 9,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device usr8200_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = usr8200_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = usr8200_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct resource usr8200_rtc_resources = {
-+ .flags = IORESOURCE_MEM
-+};
-+
-+static struct platform_device usr8200_rtc = {
-+ .name = "rtc7301",
-+ .id = 0,
-+ .num_resources = 1,
-+ .resource = &usr8200_rtc_resources,
-+};
-+
-+static struct platform_device *usr8200_devices[] __initdata = {
-+ &usr8200_flash,
-+ &usr8200_uart,
-+ &usr8200_led,
-+ &usr8200_eth[0],
-+ &usr8200_eth[1],
-+ &usr8200_rtc,
-+};
-+
-+static void __init usr8200_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ usr8200_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
-+
-+ usr8200_rtc_resources.start = IXP4XX_EXP_BUS_BASE(2);
-+ usr8200_rtc_resources.end = IXP4XX_EXP_BUS_BASE(2) + 0x01ff;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
-+ IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
-+ *IXP4XX_GPIO_GPCLKR = 0x01100000;
-+
-+ /* configure button as input */
-+ gpio_line_config(12, IXP4XX_GPIO_IN);
-+
-+ platform_add_devices(usr8200_devices, ARRAY_SIZE(usr8200_devices));
-+}
-+
-+MACHINE_START(USR8200, "USRobotics USR8200")
-+ /* Maintainer: Peter Denison <openwrt at marshadder.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = usr8200_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-4.9/520-tw2662_support.patch b/target/linux/ixp4xx/patches-4.9/520-tw2662_support.patch
deleted file mode 100644
index 39a261b8e0..0000000000
--- a/target/linux/ixp4xx/patches-4.9/520-tw2662_support.patch
+++ /dev/null
@@ -1,316 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -176,6 +176,15 @@ config ARCH_PRPMC1100
- PrPCM1100 Processor Mezanine Module. For more information on
- this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_TW2662
-+ bool "Titan Wireless TW-266-2"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Titan
-+ Wireless TW266-2. For more information on this platform,
-+ see http://openwrt.org
-+
-+
- config MACH_TW5334
- bool "Titan Wireless TW-533-4"
- select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid
- obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_TW2662) += tw2662-pci.o
- obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
- obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
- obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o
-@@ -54,6 +55,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
- obj-$(CONFIG_MACH_COMPEXWP18) += compex42x-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-+obj-$(CONFIG_MACH_TW2662) += tw2662-setup.o
- obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
- obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
- obj-$(CONFIG_MACH_USR8200) += usr8200-setup.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -45,7 +45,7 @@ static __inline__ void __arch_decomp_set
- machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
- machine_is_pronghorn() || machine_is_pronghorn_metro() ||
- machine_is_wrt300nv2() || machine_is_tw5334() ||
-- machine_is_usr8200())
-+ machine_is_usr8200() || machine_is_tw2662())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw2662-pci.c
-@@ -0,0 +1,67 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw2662-pci.c
-+ *
-+ * PCI setup routines for Tiran Wireless TW-266-2 platform
-+ *
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex at ozo.com>
-+ * Copyright (C) 2010 Gabor Juhos <juhosg at openwrt.org>
-+ *
-+ * Maintainer: Deepak Saxena <dsaxena at mvista.com>
-+ * Maintainer: Alexandros C. Couloumbis <alex at ozo.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach/pci.h>
-+
-+#define SLOT0_DEVID 1
-+#define SLOT1_DEVID 3
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define SLOT0_INTA 11
-+#define SLOT1_INTA 9
-+
-+void __init tw2662_pci_preinit(void)
-+{
-+ irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init tw2662_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == SLOT0_DEVID)
-+ return IXP4XX_GPIO_IRQ(SLOT0_INTA);
-+ else if (slot == SLOT1_DEVID)
-+ return IXP4XX_GPIO_IRQ(SLOT1_INTA);
-+ else return -1;
-+}
-+
-+struct hw_pci tw2662_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = tw2662_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = tw2662_map_irq,
-+};
-+
-+int __init tw2662_pci_init(void)
-+{
-+ if (machine_is_tw2662())
-+ pci_common_init(&tw2662_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(tw2662_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
-@@ -0,0 +1,196 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw2662-setup.c
-+ *
-+ * Titan Wireless TW-266-2
-+ *
-+ * Copyright (C) 2010 Gabor Juhos <juhosg at openwrt.org>
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex at ozo.com>
-+ *
-+ * based on ap1000-setup.c:
-+ * Author: Imre Kaloz <Kaloz at openwrt.org>
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/io.h>
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+/* gpio mask used by platform device */
-+#define TW2662_GPIO_MASK (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7)
-+
-+static struct flash_platform_data tw2662_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource tw2662_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device tw2662_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &tw2662_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw2662_flash_resource,
-+};
-+
-+static struct resource tw2662_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port tw2662_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device tw2662_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = tw2662_uart_data,
-+ .num_resources = 2,
-+ .resource = tw2662_uart_resources
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info tw2662_plat_eth[] = {
-+ {
-+ .phy = 3,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device tw2662_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = tw2662_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = tw2662_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+
-+static struct platform_device *tw2662_devices[] __initdata = {
-+ &tw2662_flash,
-+ &tw2662_uart,
-+ &tw2662_eth[0],
-+ &tw2662_eth[1],
-+};
-+
-+static char tw2662_mem_fixup[] __initdata = "mem=64M ";
-+
-+static void __init tw2662_fixup(struct tag *tags, char **cmdline)
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(tw2662_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, tw2662_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(tw2662_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(tw2662_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
-+static void __init tw2662_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ tw2662_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ tw2662_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ platform_add_devices(tw2662_devices, ARRAY_SIZE(tw2662_devices));
-+
-+ if (!(is_valid_ether_addr(tw2662_plat_eth[0].hwaddr)))
-+ random_ether_addr(tw2662_plat_eth[0].hwaddr);
-+ if (!(is_valid_ether_addr(tw2662_plat_eth[1].hwaddr))) {
-+ memcpy(tw2662_plat_eth[1].hwaddr, tw2662_plat_eth[0].hwaddr, ETH_ALEN);
-+ tw2662_plat_eth[1].hwaddr[5] = (tw2662_plat_eth[0].hwaddr[5] + 1);
-+ }
-+
-+}
-+
-+#ifdef CONFIG_MACH_TW2662
-+MACHINE_START(TW2662, "Titan Wireless TW-266-2")
-+ /* Maintainer: Alexandros C. Couloumbis <alex at ozo.com> */
-+ .fixup = tw2662_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = tw2662_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-4.9/530-ap42x_support.patch b/target/linux/ixp4xx/patches-4.9/530-ap42x_support.patch
deleted file mode 100644
index 1afbe3d61e..0000000000
--- a/target/linux/ixp4xx/patches-4.9/530-ap42x_support.patch
+++ /dev/null
@@ -1,282 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -4,6 +4,14 @@ menu "Intel IXP4xx Implementation Option
-
- comment "IXP4xx Platforms"
-
-+config MACH_AP42X
-+ bool "Tonze AP-422/425"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Tonze's
-+ AP-422/425 boards. For more information on this platform,
-+ see http://tonze.com.tw
-+
- config MACH_NSLU2
- bool
- prompt "Linksys NSLU2"
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -5,6 +5,7 @@
- obj-pci-y :=
- obj-pci-n :=
-
-+obj-pci-$(CONFIG_MACH_AP42X) += ap42x-pci.o
- obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
- obj-pci-$(CONFIG_MACH_CAMBRIA) += cambria-pci.o
-@@ -32,6 +33,7 @@ obj-pci-$(CONFIG_MACH_USR8200) += usr82
-
- obj-y += common.o
-
-+obj-$(CONFIG_MACH_AP42X) += ap42x-setup.o
- obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
- obj-$(CONFIG_MACH_AVILA) += avila-setup.o
- obj-$(CONFIG_MACH_CAMBRIA) += cambria-setup.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/ap42x-pci.c
-@@ -0,0 +1,63 @@
-+/*
-+ * arch/arch/mach-ixp4xx/ap42x-pci.c
-+ *
-+ * PCI setup routines for Tonze AP-422/425
-+ *
-+ * Copyright (C) 2012 Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init ap42x_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init ap42x_map_irq(const struct pci_dev *dev, u8 slot,
-+ u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else return -1;
-+}
-+
-+struct hw_pci ap42x_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = ap42x_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = ap42x_map_irq,
-+};
-+
-+int __init ap42x_pci_init(void)
-+{
-+ if (machine_is_ap42x())
-+ pci_common_init(&ap42x_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(ap42x_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/ap42x-setup.c
-@@ -0,0 +1,166 @@
-+/*
-+ * arch/arm/mach-ixp4xx/ap42x-setup.c
-+ *
-+ * Board setup for the Tonze AP-42x boards
-+ *
-+ * Copyright (C) 2012 Imre Kaloz <kaloz at openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz at openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct mtd_partition ap42x_flash_partitions[] = {
-+ {
-+ .name = "RedBoot",
-+ .offset = 0x00000000,
-+ .size = 0x00080000,
-+ }, {
-+ .name = "linux",
-+ .offset = 0x00080000,
-+ .size = 0x00100000,
-+ }, {
-+ .name = "rootfs",
-+ .offset = 0x00180000,
-+ .size = 0x00660000,
-+ }, {
-+ .name = "FIS directory",
-+ .offset = 0x007f8000,
-+ .size = 0x00007000,
-+ }, {
-+ .name = "RedBoot config",
-+ .offset = 0x007ff000,
-+ .size = 0x00001000,
-+ },
-+};
-+
-+static struct physmap_flash_data ap42x_flash_data = {
-+ .width = 2,
-+ .parts = ap42x_flash_partitions,
-+ .nr_parts = ARRAY_SIZE(ap42x_flash_partitions),
-+};
-+
-+static struct resource ap42x_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+ .start = IXP4XX_EXP_BUS_BASE_PHYS,
-+ .end = IXP4XX_EXP_BUS_BASE_PHYS + SZ_8M - 1,
-+};
-+
-+static struct platform_device ap42x_flash = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ap42x_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &ap42x_flash_resource,
-+};
-+
-+static struct resource ap42x_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port ap42x_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device ap42x_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = ap42x_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &ap42x_uart_resource,
-+};
-+
-+static struct eth_plat_info ap42x_plat_eth[] = {
-+ {
-+ .phy = 2,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ap42x_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ap42x_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ap42x_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *ap42x_devices[] __initdata = {
-+ &ap42x_flash,
-+ &ap42x_uart,
-+ &ap42x_eth[0],
-+ &ap42x_eth[1],
-+};
-+
-+static void __init ap42x_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ ap42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ ap42x_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(ap42x_devices, ARRAY_SIZE(ap42x_devices));
-+}
-+
-+#ifdef CONFIG_MACH_AP42X
-+MACHINE_START(AP42X, "Tonze AP-422/425")
-+ /* Maintainer: Imre Kaloz <kaloz at openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x100,
-+ .init_machine = ap42x_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+#endif
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -45,7 +45,8 @@ static __inline__ void __arch_decomp_set
- machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
- machine_is_pronghorn() || machine_is_pronghorn_metro() ||
- machine_is_wrt300nv2() || machine_is_tw5334() ||
-- machine_is_usr8200() || machine_is_tw2662())
-+ machine_is_usr8200() || machine_is_tw2662() ||
-+ machine_is_ap42x())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-4.9/600-skb_avoid_dmabounce.patch b/target/linux/ixp4xx/patches-4.9/600-skb_avoid_dmabounce.patch
deleted file mode 100644
index cdd9fde8f0..0000000000
--- a/target/linux/ixp4xx/patches-4.9/600-skb_avoid_dmabounce.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -215,6 +215,9 @@ struct sk_buff *__alloc_skb(unsigned int
-
- if (sk_memalloc_socks() && (flags & SKB_ALLOC_RX))
- gfp_mask |= __GFP_MEMALLOC;
-+#ifdef CONFIG_ARCH_IXP4XX
-+ gfp_mask |= GFP_DMA;
-+#endif
-
- /* Get the HEAD */
- skb = kmem_cache_alloc_node(cache, gfp_mask & ~__GFP_DMA, node);
-@@ -1228,6 +1231,10 @@ int pskb_expand_head(struct sk_buff *skb
- if (skb_shared(skb))
- BUG();
-
-+#ifdef CONFIG_ARCH_IXP4XX
-+ gfp_mask |= GFP_DMA;
-+#endif
-+
- size = SKB_DATA_ALIGN(size);
-
- if (skb_pfmemalloc(skb))
diff --git a/target/linux/ixp4xx/patches-4.9/900-ixp4xx-crypto-include-module.h.patch b/target/linux/ixp4xx/patches-4.9/900-ixp4xx-crypto-include-module.h.patch
deleted file mode 100644
index 24c93dc741..0000000000
--- a/target/linux/ixp4xx/patches-4.9/900-ixp4xx-crypto-include-module.h.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/crypto/ixp4xx_crypto.c
-+++ b/drivers/crypto/ixp4xx_crypto.c
-@@ -14,6 +14,7 @@
- #include <linux/dmapool.h>
- #include <linux/crypto.h>
- #include <linux/kernel.h>
-+#include <linux/module.h>
- #include <linux/rtnetlink.h>
- #include <linux/interrupt.h>
- #include <linux/spinlock.h>
diff --git a/target/linux/ixp4xx/patches-4.9/910-ixp4xx-nr_irq_lines.patch b/target/linux/ixp4xx/patches-4.9/910-ixp4xx-nr_irq_lines.patch
deleted file mode 100644
index 06e09f469d..0000000000
--- a/target/linux/ixp4xx/patches-4.9/910-ixp4xx-nr_irq_lines.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -53,7 +53,7 @@ static int __init ixdp425_map_irq(const
- };
-
- if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-- return pci_irq_table[(slot + pin - 2) % 4];
-+ return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
-
- return -1;
- }
---- a/arch/arm/mach-ixp4xx/miccpt-pci.c
-+++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
-@@ -54,7 +54,7 @@ static int __init miccpt_map_irq(const s
- };
-
- if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-- return pci_irq_table[(slot + pin - 2) % 4];
-+ return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
-
- return -1;
- }
--
2.20.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list