[PATCH] ramips: add support for GL.iNet GL-MT1300
xinfa.deng at gl-inet.com
xinfa.deng at gl-inet.com
Mon Dec 14 23:14:47 EST 2020
From: "Xinfa Deng" <xinfa.deng at gl-inet.com>
The GL-MT1300 is a high-performance new generation pocket-sized router
that offers a powerful hardware and first-class cybersecurity protocol
with unique and modern design.
Specifications:
- SoC: MT7621A, Dual-Core @880MHz
- RAM: 256 MB DDR3
- Flash: 32 MB
- Ethernet: 3 x 10/100/1000: 2 x LAN + 1 x WAN
- Wireless: 1 x MT7615D Dual-Band 2.4GHz(400Mbps) + 5GHz(867Mbps)
- USB: 1 x USB 3.0 port
- Slot: 1 x MicroSD card slot
- Button: 1 x Reset button
- Switch: 1 x Mode switch
- LED: 1 x Blue LED + 1 x White LED
MAC addresses based on vendor firmware:
WAN : factory 0x4000
LAN : Mac from factory 0x4000 + 1
2.4GHz : factory 0x4
5GHz : Mac form factory 0x4 + 1
For more information on GL-MT1300, see the OFFICIAL GL.iNet website:
https://www.gl-inet.com/products/gl-mt1300/
Signed-off-by: Xinfa Deng <xinfa.deng at gl-inet.com>
---
.../linux/ramips/dts/mt7621_glinet_gl-mt1300.dts | 150 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 9 ++
.../mt7621/base-files/etc/board.d/02_network | 1 +
.../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 3 +
4 files changed, 163 insertions(+)
create mode 100644 target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts
diff --git a/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts b/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts
new file mode 100644
index 0000000..666fcfb
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "glinet,gl-mt1300", "mediatek,mt7621-soc";
+ model = "GL.iNet GL-MT1300";
+
+ aliases {
+ led-boot = &led_run;
+ led-failsafe = &led_run;
+ led-running = &led_run;
+ led-upgrade = &led_run;
+ label-mac-device = &wan;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ switch {
+ label = "switch";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_run: blue {
+ label = "blue:run";
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ white {
+ label = "white:system";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ compatible = "mx25l25635f", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi at 0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ };
+};
+
+&gmac0 {
+ mtd-mac-address = <&factory 0x4000>;
+ mtd-mac-address-increment = <1>;
+};
+
+&switch0 {
+ ports {
+ port at 2 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port at 3 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ wan: port at 4 {
+ status = "okay";
+ label = "wan";
+ mtd-mac-address = <&factory 0x4000>;
+ };
+ };
+};
+
+&uartlite3 {
+ status = "okay";
+};
+
+&state_default {
+ gpio {
+ group = "wdt", "jtag";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index fad1855..615a55a 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -475,6 +475,15 @@ define Device/gehua_ghl-r-001
endef
TARGET_DEVICES += gehua_ghl-r-001
+define Device/glinet_gl-mt1300
+ $(Device/dsa-migration)
+ IMAGE_SIZE :=32448k
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-MT1300
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3
+endef
+TARGET_DEVICES += glinet_gl-mt1300
+
define Device/gnubee_gb-pc1
$(Device/dsa-migration)
DEVICE_VENDOR := GnuBee
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index c5b3514..bca4cc2 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -14,6 +14,7 @@ ramips_setup_interfaces()
ucidef_set_interfaces_lan_wan "lan" "wan"
;;
asiarf,ap7621-nv1|\
+ glinet,gl-mt1300|\
lenovo,newifi-d1|\
mikrotik,routerboard-m33g|\
xiaomi,mi-router-3g|\
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index b7a41f0..365dfd8 100644
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -10,6 +10,9 @@ PHYNBR=${DEVPATH##*/phy}
board=$(board_name)
case "$board" in
+ glinet,gl-mt1300)
+ [ "$PHYNBR" = "1" ] && macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress
+ ;;
linksys,ea7300-v1|\
linksys,ea7300-v2|\
linksys,ea7500-v2)
--
2.7.4
More information about the openwrt-devel
mailing list