[PATCH 03/13] ltq-vdsl-app: add ubus support to get metrics
Andre Heider
a.heider at gmail.com
Fri Dec 11 07:05:03 EST 2020
Add a 'dsl' ubus object with a 'metrics' function to replace the
expensive shell parsing done by /etc/init.d/dsl_control [dsl|luci]stat.
All metrics are gathered by using syscalls. An additional thread is started
to handle ubus events.
$ time /etc/init.d/dsl_control dslstat
real 0m 2.66s
user 0m 0.90s
sys 0m 1.76s
$ time ubus call dsl metrics
real 0m 0.02s
user 0m 0.00s
sys 0m 0.01s
Example output:
{
"api_version": "4.17.18.6",
"firmware_version": "5.8.1.5.0.7",
"chipset": "Lantiq-VRX200",
"driver_version": "1.5.17.6",
"state": "Showtime with TC-Layer sync",
"up": true,
"uptime": 3891,
"atu_c": {
"vendor_id": [
181,
0,
66,
68,
67,
77,
178,
26
],
"vendor": "Broadcom 178.26",
"system_vendor_id": [
181,
0,
66,
68,
67,
77,
0,
0
],
"system_vendor": "Broadcom",
"version": [
49,
57,
46,
48,
46,
51,
53,
46,
50,
32,
86,
69,
95,
49,
49,
95
],
"serial": [
65,
65,
49,
52,
52,
54,
70,
69,
48,
90,
87,
45,
48,
56,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0
]
},
"power_state": "L0 - Synchronized",
"xtse": [
0,
0,
0,
0,
0,
0,
0,
2
],
"annex": "B",
"standard": "G.993.2",
"profile": "17a",
"mode": "G.993.2 (VDSL2, Profile 17a, with down- and upstream vectoring)",
"upstream": {
"vector": true,
"trellis": true,
"bitswap": true,
"retx": true,
"virtual_noise": false,
"interleave_delay": 0,
"data_rate": 31999000,
"latn": 8.500000,
"satn": 8.400000,
"snr": 12.700000,
"actps": -90.100000,
"actatp": 13.400000,
"attndr": 37180000
},
"downstream": {
"vector": true,
"trellis": true,
"bitswap": true,
"retx": true,
"virtual_noise": false,
"interleave_delay": 140,
"data_rate": 89998000,
"latn": 9.500000,
"satn": 9.600000,
"snr": 13.300000,
"actps": -90.100000,
"actatp": -1.600000,
"attndr": 116315372
},
"errors": {
"near": {
"es": 1,
"ses": 0,
"loss": 3,
"uas": 424,
"lofs": 0,
"fecs": 0,
"hec": 0,
"ibe": 0,
"crc_p": 0,
"crcp_p": 0,
"cv_p": 0,
"cvp_p": 0,
"rx_corrupted": 27740,
"rx_uncorrected_protected": 27010,
"rx_retransmitted": 0,
"rx_corrected": 730,
"tx_retransmitted": 16222
},
"far": {
"es": 242,
"ses": 71,
"loss": 0,
"uas": 424,
"lofs": 0,
"fecs": 22687,
"hec": 0,
"ibe": 0,
"crc_p": 0,
"crcp_p": 0,
"cv_p": 0,
"cvp_p": 0,
"rx_corrupted": 1383552,
"rx_uncorrected_protected": 1220215,
"rx_retransmitted": 0,
"rx_corrected": 163337,
"tx_retransmitted": 1574051
}
}
}
Signed-off-by: Andre Heider <a.heider at gmail.com>
---
package/network/config/ltq-vdsl-app/Makefile | 3 +-
.../ltq-vdsl-app/patches/300-ubus.patch | 50 ++
.../ltq-vdsl-app/src/src/dsl_cpe_ubus.c | 803 ++++++++++++++++++
3 files changed, 855 insertions(+), 1 deletion(-)
create mode 100644 package/network/config/ltq-vdsl-app/patches/300-ubus.patch
create mode 100644 package/network/config/ltq-vdsl-app/src/src/dsl_cpe_ubus.c
diff --git a/package/network/config/ltq-vdsl-app/Makefile b/package/network/config/ltq-vdsl-app/Makefile
index ef81f7c8d7..5a84ea8e7e 100644
--- a/package/network/config/ltq-vdsl-app/Makefile
+++ b/package/network/config/ltq-vdsl-app/Makefile
@@ -20,6 +20,7 @@ PKG_LICENSE:=BSD-2-Clause
PKG_BUILD_DEPENDS:=ltq-vdsl
PKG_FLAGS:=nonshared
+PKG_FIXUP:=autoreconf
include $(INCLUDE_DIR)/package.mk
@@ -28,7 +29,7 @@ define Package/ltq-vdsl-app
CATEGORY:=Network
TITLE:=Lantiq VDSL userland tool
URL:=http://www.lantiq.com/
- DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt +ltq-dsl-base
+ DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt +ltq-dsl-base +libubox +libubus
endef
define Package/ltq-vdsl-app/description
diff --git a/package/network/config/ltq-vdsl-app/patches/300-ubus.patch b/package/network/config/ltq-vdsl-app/patches/300-ubus.patch
new file mode 100644
index 0000000000..f218ea2208
--- /dev/null
+++ b/package/network/config/ltq-vdsl-app/patches/300-ubus.patch
@@ -0,0 +1,50 @@
+--- a/src/dsl_cpe_control.c
++++ b/src/dsl_cpe_control.c
+@@ -177,6 +177,9 @@ extern DSL_Error_t DSL_CPE_Pipe_StaticRe
+ #endif /* INCLUDE_DSL_RESOURCE_STATISTICS*/
+ #endif
+
++extern void ubus_init();
++extern void ubus_deinit();
++
+ DSL_char_t *g_sFirmwareName1 = DSL_NULL;
+ DSL_FirmwareFeatures_t g_nFwFeatures1 = {DSL_FW_XDSLMODE_CLEANED, DSL_FW_XDSLFEATURE_CLEANED,
+ DSL_FW_XDSLFEATURE_CLEANED};
+@@ -6759,6 +6762,8 @@ DSL_int_t dsl_cpe_daemon (
+ signal (SIGTERM, DSL_CPE_TerminationHandler);
+ #endif /* RTEMS*/
+
++ ubus_init();
++
+ /* Open DSL_CPE_MAX_DSL_ENTITIES devices*/
+ for (nDevice = 0; nDevice < DSL_CPE_MAX_DSL_ENTITIES; nDevice++)
+ {
+@@ -7213,6 +7218,7 @@ DSL_int_t dsl_cpe_daemon (
+ #endif /* INCLUDE_DSL_CPE_CLI_SUPPORT */
+
+ DSL_CPE_CONTROL_EXIT:
++ ubus_deinit();
+
+ #ifdef INCLUDE_DSL_BONDING
+ DSL_CPE_BND_Stop((DSL_CPE_BND_Context_t*)pCtrlCtx->pBnd);
+--- a/src/Makefile.am
++++ b/src/Makefile.am
+@@ -11,7 +11,7 @@ else
+ dsl_cpe_control_common_ldflags =
+ endif
+
+-dsl_cpe_control_LDADD = -lpthread -lrt
++dsl_cpe_control_LDADD = -lpthread -lrt -lubox -lubus
+
+ if INCLUDE_DSL_CPE_DTI_SUPPORT
+ dsl_cpe_control_LDADD += -ldti_agent
+@@ -66,7 +66,8 @@ dsl_cpe_control_SOURCES = \
+ dsl_cpe_control.c \
+ dsl_cpe_init_cfg.c \
+ dsl_cpe_linux.c \
+- dsl_cpe_debug.c
++ dsl_cpe_debug.c \
++ dsl_cpe_ubus.c
+
+ dsl_cpe_control_SOURCES += \
+ $(dsl_cpe_control_dti_sources)
diff --git a/package/network/config/ltq-vdsl-app/src/src/dsl_cpe_ubus.c b/package/network/config/ltq-vdsl-app/src/src/dsl_cpe_ubus.c
new file mode 100644
index 0000000000..5be67dc3f0
--- /dev/null
+++ b/package/network/config/ltq-vdsl-app/src/src/dsl_cpe_ubus.c
@@ -0,0 +1,803 @@
+// SPDX-License-Identifier: BSD-2-Clause
+/*
+ * Copyright (C) 2020 Andre Heider <a.heider at gmail.com>
+ */
+
+#include <sys/ioctl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <libubus.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "dsl_cpe_control.h"
+#include <drv_dsl_cpe_api_ioctl.h>
+#ifdef INCLUDE_DSL_CPE_API_VRX
+#include <drv_mei_cpe_interface.h>
+#endif
+
+#define U16(v1, v2) ( \
+ ((uint16_t)(v1) << 8) | \
+ ((uint16_t)(v2)))
+
+#define U32(v1, v2, v3, v4) ( \
+ ((uint32_t)(v1) << 24) | \
+ ((uint32_t)(v2) << 16) | \
+ ((uint32_t)(v3) << 8) | \
+ ((uint32_t)(v4)))
+
+#define STR_CASE(id, text) \
+ case id: \
+ str = text; \
+ break;
+
+#define IOCTL(type, request) \
+ type out; \
+ memset(&out, 0, sizeof(type)); \
+ if (ioctl(fd, request, &out)) \
+ return;
+
+#define IOCTL_DIR(type, request, dir) \
+ type out; \
+ memset(&out, 0, sizeof(type)); \
+ out.nDirection = dir; \
+ if (ioctl(fd, request, &out)) \
+ return;
+
+#define IOCTL_DIR_DELT(type, request, dir, delt) \
+ type out; \
+ memset(&out, 0, sizeof(type)); \
+ out.nDirection = dir; \
+ out.nDeltDataType = delt; \
+ if (ioctl(fd, request, &out)) \
+ return;
+
+typedef enum {
+ ANNEX_UNKNOWN = 0,
+ ANNEX_A,
+ ANNEX_B,
+ ANNEX_C,
+ ANNEX_I,
+ ANNEX_J,
+ ANNEX_L,
+ ANNEX_M,
+} annex_t;
+
+typedef enum {
+ STD_UNKNOWN = 0,
+ STD_T1_413,
+ STD_TS_101_388,
+ STD_G_992_1,
+ STD_G_992_2,
+ STD_G_992_3,
+ STD_G_992_4,
+ STD_G_992_5,
+ STD_G_993_1,
+ STD_G_993_2,
+} standard_t;
+
+typedef enum {
+ VECTOR_UNKNOWN = 0,
+ VECTOR_OFF,
+ VECTOR_ON_DS,
+ VECTOR_ON_DS_US,
+} vector_t;
+
+typedef enum {
+ PROFILE_UNKNOWN = 0,
+ PROFILE_8A,
+ PROFILE_8B,
+ PROFILE_8C,
+ PROFILE_8D,
+ PROFILE_12A,
+ PROFILE_12B,
+ PROFILE_17A,
+ PROFILE_30A,
+ PROFILE_35B,
+} profile_t;
+
+static DSL_CPE_ThreadCtrl_t thread;
+static struct ubus_context *ctx;
+static struct blob_buf b;
+
+static inline void m_double(const char *id, double value) {
+ blobmsg_add_double(&b, id, value);
+}
+
+static inline void m_bool(const char *id, bool value) {
+ blobmsg_add_u8(&b, id, value);
+}
+
+static inline void m_u32(const char *id, uint32_t value) {
+ blobmsg_add_u32(&b, id, value);
+}
+
+static inline void m_str(const char *id, const char *value) {
+ blobmsg_add_string(&b, id, value);
+}
+
+static inline void m_db(const char *id, int value) {
+ m_double(id, (double)value / 10);
+}
+
+static inline void m_array(const char *id, const uint8_t *value, uint8_t len) {
+ void *c = blobmsg_open_array(&b, id);
+
+ for (uint8_t i = 0; i < len; ++i)
+ blobmsg_add_u16(&b, "", value[i]);
+
+ blobmsg_close_array(&b, c);
+}
+
+static void m_vendor(const char *id, const uint8_t *value) {
+ // ITU-T T.35: U.S.
+ if (U16(value[0], value[1]) != 0xb500)
+ return;
+
+ const char *str = NULL;
+ switch (U32(value[2], value[3], value[4], value[5])) {
+ STR_CASE(0x414C4342, "Alcatel")
+ STR_CASE(0x414E4456, "Analog Devices")
+ STR_CASE(0x4244434D, "Broadcom")
+ STR_CASE(0x43454E54, "Centillium")
+ STR_CASE(0x4753504E, "Globespan")
+ STR_CASE(0x494B4E53, "Ikanos")
+ STR_CASE(0x4946544E, "Infineon")
+ STR_CASE(0x54535443, "Texas Instruments")
+ STR_CASE(0x544D4D42, "Thomson MultiMedia Broadband")
+ STR_CASE(0x5443544E, "Trend Chip Technologies")
+ STR_CASE(0x53544D49, "ST Micro")
+ };
+
+ if (!str)
+ return;
+
+ if ((value[6] == 0) && (value[7] == 0)) {
+ m_str(id, str);
+ return;
+ }
+
+ char buf[64];
+ sprintf(buf, "%s %d.%d", str, value[6], value[7]);
+ m_str(id, buf);
+
+ return;
+}
+
+annex_t get_annex(const uint8_t *xtse) {
+ if ((xtse[0] & XTSE_1_01_A_T1_413) ||
+ (xtse[0] & XTSE_1_03_A_1_NO) ||
+ (xtse[0] & XTSE_1_04_A_1_O) ||
+ (xtse[1] & XTSE_2_01_A_2_NO) ||
+ (xtse[2] & XTSE_3_03_A_3_NO) ||
+ (xtse[2] & XTSE_3_04_A_3_O) ||
+ (xtse[3] & XTSE_4_01_A_4_NO) ||
+ (xtse[3] & XTSE_4_02_A_4_O) ||
+ (xtse[5] & XTSE_6_01_A_5_NO) ||
+ (xtse[5] & XTSE_6_02_A_5_O) ||
+ (xtse[7] & XTSE_8_01_A))
+ return ANNEX_A;
+
+ if ((xtse[0] & XTSE_1_05_B_1_NO) ||
+ (xtse[0] & XTSE_1_06_B_1_O) ||
+ (xtse[1] & XTSE_2_02_B_2_O) ||
+ (xtse[2] & XTSE_3_05_B_3_NO) ||
+ (xtse[2] & XTSE_3_06_B_3_O) ||
+ (xtse[5] & XTSE_6_03_B_5_NO) ||
+ (xtse[5] & XTSE_6_04_B_5_O) ||
+ (xtse[7] & XTSE_8_02_B))
+ return ANNEX_B;
+
+ if ((xtse[0] & XTSE_1_02_C_TS_101388) ||
+ (xtse[0] & XTSE_1_07_C_1_NO) ||
+ (xtse[0] & XTSE_1_08_C_1_O) ||
+ (xtse[1] & XTSE_2_03_C_2_NO) ||
+ (xtse[1] & XTSE_2_04_C_2_O) ||
+ (xtse[7] & XTSE_8_03_C))
+ return ANNEX_C;
+
+ if ((xtse[3] & XTSE_4_05_I_3_NO) ||
+ (xtse[3] & XTSE_4_06_I_3_O) ||
+ (xtse[4] & XTSE_5_01_I_4_NO) ||
+ (xtse[4] & XTSE_5_02_I_4_O) ||
+ (xtse[5] & XTSE_6_07_I_5_NO) ||
+ (xtse[5] & XTSE_6_08_I_5_O))
+ return ANNEX_I;
+
+ if ((xtse[3] & XTSE_4_07_J_3_NO) ||
+ (xtse[3] & XTSE_4_08_J_3_O) ||
+ (xtse[6] & XTSE_7_01_J_5_NO) ||
+ (xtse[6] & XTSE_7_02_J_5_O))
+ return ANNEX_J;
+
+ if ((xtse[4] & XTSE_5_03_L_3_NO) ||
+ (xtse[4] & XTSE_5_04_L_3_NO) ||
+ (xtse[4] & XTSE_5_05_L_3_O) ||
+ (xtse[4] & XTSE_5_06_L_3_O))
+ return ANNEX_L;
+
+ if ((xtse[4] & XTSE_5_07_M_3_NO) ||
+ (xtse[4] & XTSE_5_08_M_3_O) ||
+ (xtse[6] & XTSE_7_03_M_5_NO) ||
+ (xtse[6] & XTSE_7_04_M_5_O))
+ return ANNEX_M;
+
+ return ANNEX_UNKNOWN;
+}
+
+static standard_t get_standard(const uint8_t *xtse) {
+ if (xtse[0] & XTSE_1_01_A_T1_413)
+ return STD_T1_413;
+
+ if (xtse[0] & XTSE_1_02_C_TS_101388)
+ return STD_TS_101_388;
+
+ if ((xtse[0] & XTSE_1_03_A_1_NO) ||
+ (xtse[0] & XTSE_1_04_A_1_O) ||
+ (xtse[0] & XTSE_1_05_B_1_NO) ||
+ (xtse[0] & XTSE_1_06_B_1_O) ||
+ (xtse[0] & XTSE_1_07_C_1_NO) ||
+ (xtse[0] & XTSE_1_08_C_1_O))
+ return STD_G_992_1;
+
+ if ((xtse[1] & XTSE_2_01_A_2_NO) ||
+ (xtse[1] & XTSE_2_02_B_2_O) ||
+ (xtse[1] & XTSE_2_03_C_2_NO) ||
+ (xtse[1] & XTSE_2_04_C_2_O))
+ return STD_G_992_2;
+
+ if ((xtse[2] & XTSE_3_03_A_3_NO) ||
+ (xtse[2] & XTSE_3_04_A_3_O) ||
+ (xtse[2] & XTSE_3_05_B_3_NO) ||
+ (xtse[2] & XTSE_3_06_B_3_O) ||
+ (xtse[3] & XTSE_4_05_I_3_NO) ||
+ (xtse[3] & XTSE_4_06_I_3_O) ||
+ (xtse[3] & XTSE_4_07_J_3_NO) ||
+ (xtse[3] & XTSE_4_08_J_3_O) ||
+ (xtse[4] & XTSE_5_03_L_3_NO) ||
+ (xtse[4] & XTSE_5_04_L_3_NO) ||
+ (xtse[4] & XTSE_5_05_L_3_O) ||
+ (xtse[4] & XTSE_5_06_L_3_O) ||
+ (xtse[4] & XTSE_5_07_M_3_NO) ||
+ (xtse[4] & XTSE_5_08_M_3_O))
+ return STD_G_992_3;
+
+ if ((xtse[3] & XTSE_4_01_A_4_NO) ||
+ (xtse[3] & XTSE_4_02_A_4_O) ||
+ (xtse[4] & XTSE_5_01_I_4_NO) ||
+ (xtse[4] & XTSE_5_02_I_4_O))
+ return STD_G_992_4;
+
+ if ((xtse[5] & XTSE_6_01_A_5_NO) ||
+ (xtse[5] & XTSE_6_02_A_5_O) ||
+ (xtse[5] & XTSE_6_03_B_5_NO) ||
+ (xtse[5] & XTSE_6_04_B_5_O) ||
+ (xtse[5] & XTSE_6_07_I_5_NO) ||
+ (xtse[5] & XTSE_6_08_I_5_O) ||
+ (xtse[6] & XTSE_7_01_J_5_NO) ||
+ (xtse[6] & XTSE_7_02_J_5_O) ||
+ (xtse[6] & XTSE_7_03_M_5_NO) ||
+ (xtse[6] & XTSE_7_04_M_5_O))
+ return STD_G_992_5;
+
+ if (xtse[7] & XTSE_8_08)
+ return STD_G_993_1;
+
+ if ((xtse[7] & XTSE_8_01_A) ||
+ (xtse[7] & XTSE_8_02_B) ||
+ (xtse[7] & XTSE_8_03_C))
+ return STD_G_993_2;
+
+ return STD_UNKNOWN;
+}
+
+static void version_information(int fd) {
+ IOCTL(DSL_VersionInformation_t, DSL_FIO_VERSION_INFORMATION_GET)
+
+ m_str("api_version", out.data.DSL_DriverVersionApi);
+ m_str("firmware_version", out.data.DSL_ChipSetFWVersion);
+ m_str("chipset", out.data.DSL_ChipSetType);
+ m_str("driver_version", out.data.DSL_DriverVersionMeiBsp);
+}
+
+static void line_state(int fd) {
+ IOCTL(DSL_LineState_t, DSL_FIO_LINE_STATE_GET)
+
+ const char *str;
+ switch (out.data.nLineState) {
+ STR_CASE(DSL_LINESTATE_NOT_INITIALIZED, "Not initialized")
+ STR_CASE(DSL_LINESTATE_EXCEPTION, "Exception")
+ STR_CASE(DSL_LINESTATE_NOT_UPDATED, "Not updated")
+ STR_CASE(DSL_LINESTATE_IDLE_REQUEST, "Idle request")
+ STR_CASE(DSL_LINESTATE_IDLE, "Idle")
+ STR_CASE(DSL_LINESTATE_SILENT_REQUEST, "Silent request")
+ STR_CASE(DSL_LINESTATE_SILENT, "Silent")
+ STR_CASE(DSL_LINESTATE_HANDSHAKE, "Handshake")
+ STR_CASE(DSL_LINESTATE_BONDING_CLR, "Bonding CLR")
+ STR_CASE(DSL_LINESTATE_FULL_INIT, "Full init")
+ STR_CASE(DSL_LINESTATE_SHORT_INIT_ENTRY, "Short init entry")
+ STR_CASE(DSL_LINESTATE_DISCOVERY, "Discovery")
+ STR_CASE(DSL_LINESTATE_TRAINING, "Training")
+ STR_CASE(DSL_LINESTATE_ANALYSIS, "Analysis")
+ STR_CASE(DSL_LINESTATE_EXCHANGE, "Exchange")
+ STR_CASE(DSL_LINESTATE_SHOWTIME_NO_SYNC, "Showtime without TC-Layer sync")
+ STR_CASE(DSL_LINESTATE_SHOWTIME_TC_SYNC, "Showtime with TC-Layer sync")
+ STR_CASE(DSL_LINESTATE_FASTRETRAIN, "Fastretrain")
+ STR_CASE(DSL_LINESTATE_LOWPOWER_L2, "Lowpower L2")
+ STR_CASE(DSL_LINESTATE_LOOPDIAGNOSTIC_ACTIVE, "Loopdiagnostic active")
+ STR_CASE(DSL_LINESTATE_LOOPDIAGNOSTIC_DATA_EXCHANGE, "Loopdiagnostic data exchange")
+ STR_CASE(DSL_LINESTATE_LOOPDIAGNOSTIC_DATA_REQUEST, "Loopdiagnostic data request")
+ STR_CASE(DSL_LINESTATE_LOOPDIAGNOSTIC_COMPLETE, "Loopdiagnostic complete")
+ STR_CASE(DSL_LINESTATE_RESYNC, "Resync")
+ STR_CASE(DSL_LINESTATE_TEST, "Test")
+ STR_CASE(DSL_LINESTATE_TEST_LOOP, "Test loop")
+ STR_CASE(DSL_LINESTATE_TEST_REVERB, "Test reverb")
+ STR_CASE(DSL_LINESTATE_TEST_MEDLEY, "Test medley")
+ STR_CASE(DSL_LINESTATE_TEST_SHOWTIME_LOCK, "Showtime lock")
+ STR_CASE(DSL_LINESTATE_TEST_QUIET, "Quiet")
+ STR_CASE(DSL_LINESTATE_LOWPOWER_L3, "Lowpower L3")
+#ifndef INCLUDE_DSL_CPE_API_DANUBE
+ STR_CASE(DSL_LINESTATE_DISABLED, "Disabled")
+ STR_CASE(DSL_LINESTATE_T1413, "T1413")
+ STR_CASE(DSL_LINESTATE_ORDERLY_SHUTDOWN_REQUEST, "Orderly shutdown request")
+ STR_CASE(DSL_LINESTATE_ORDERLY_SHUTDOWN, "Orderly shutdown")
+ STR_CASE(DSL_LINESTATE_TEST_FILTERDETECTION_ACTIVE, "Test filterdetection active")
+ STR_CASE(DSL_LINESTATE_TEST_FILTERDETECTION_COMPLETE, "Test filterdetection complete")
+#endif
+ default:
+ str = NULL;
+ break;
+ };
+ if (str)
+ m_str("state", str);
+
+ m_bool("up", out.data.nLineState == DSL_LINESTATE_SHOWTIME_TC_SYNC);
+}
+
+static void pm_channel_counters_showtime(int fd) {
+ IOCTL_DIR(DSL_PM_ChannelCounters_t, DSL_FIO_PM_CHANNEL_COUNTERS_SHOWTIME_GET, DSL_NEAR_END);
+
+ m_u32("uptime", out.interval.nElapsedTime);
+}
+
+static void g997_line_inventory(int fd) {
+ IOCTL_DIR(DSL_G997_LineInventory_t, DSL_FIO_G997_LINE_INVENTORY_GET, DSL_DOWNSTREAM)
+
+ m_array("vendor_id", out.data.G994VendorID, DSL_G997_LI_MAXLEN_VENDOR_ID);
+ m_vendor("vendor", out.data.G994VendorID);
+ m_array("system_vendor_id", out.data.SystemVendorID, DSL_G997_LI_MAXLEN_VENDOR_ID);
+ m_vendor("system_vendor", out.data.SystemVendorID);
+ m_array("version", out.data.VersionNumber, DSL_G997_LI_MAXLEN_VERSION);
+ m_array("serial", out.data.SerialNumber, DSL_G997_LI_MAXLEN_SERIAL);
+}
+
+static void g997_power_management_status(int fd) {
+ IOCTL(DSL_G997_PowerManagementStatus_t, DSL_FIO_G997_POWER_MANAGEMENT_STATUS_GET)
+
+ const char *str;
+ switch (out.data.nPowerManagementStatus) {
+ STR_CASE(DSL_G997_PMS_NA, "Power management state is not available")
+ STR_CASE(DSL_G997_PMS_L0, "L0 - Synchronized")
+ STR_CASE(DSL_G997_PMS_L1, "L1 - Power Down Data transmission (G.992.2)")
+ STR_CASE(DSL_G997_PMS_L2, "L2 - Power Down Data transmission (G.992.3 and G.992.4)")
+ STR_CASE(DSL_G997_PMS_L3, "L3 - No power")
+ default:
+ str = NULL;
+ break;
+ };
+ if (str)
+ m_str("power_state", str);
+}
+
+static void g997_xtu_system_enabling(int fd, standard_t *standard) {
+ IOCTL(DSL_G997_XTUSystemEnabling_t, DSL_FIO_G997_XTU_SYSTEM_ENABLING_STATUS_GET)
+
+ m_array("xtse", out.data.XTSE, DSL_G997_NUM_XTSE_OCTETS);
+
+ const char *str;
+ switch (get_annex(out.data.XTSE)) {
+ STR_CASE(ANNEX_A, "A")
+ STR_CASE(ANNEX_B, "B")
+ STR_CASE(ANNEX_C, "C")
+ STR_CASE(ANNEX_I, "I")
+ STR_CASE(ANNEX_J, "J")
+ STR_CASE(ANNEX_L, "L")
+ STR_CASE(ANNEX_M, "M")
+ default:
+ str = NULL;
+ break;
+ };
+ if (str)
+ m_str("annex", str);
+
+ *standard = get_standard(out.data.XTSE);
+
+ switch (*standard) {
+ STR_CASE(STD_T1_413, "T1.413")
+ STR_CASE(STD_TS_101_388, "TS 101 388")
+ STR_CASE(STD_G_992_1, "G.992.1")
+ STR_CASE(STD_G_992_2, "G.992.2")
+ STR_CASE(STD_G_992_3, "G.992.3")
+ STR_CASE(STD_G_992_4, "G.992.4")
+ STR_CASE(STD_G_992_5, "G.992.5")
+ STR_CASE(STD_G_993_1, "G.993.1")
+ STR_CASE(STD_G_993_2, "G.993.2")
+ default:
+ str = NULL;
+ break;
+ }
+ if (str)
+ m_str("standard", str);
+}
+
+static vector_t get_vector_status() {
+#ifdef INCLUDE_DSL_CPE_API_VRX
+ int fd = open(DSL_CPE_DSL_LOW_DEV "/0", O_RDWR, 0644);
+ if (fd < 0)
+ return VECTOR_UNKNOWN;
+
+ IOCTL_MEI_dsmStatus_t out;
+ memset(&out, 0, sizeof(IOCTL_MEI_dsmStatus_t));
+ int ret = ioctl(fd, FIO_MEI_DSM_STATUS_GET, &out);
+ close(fd);
+
+ if (ret)
+ return VECTOR_UNKNOWN;
+
+ switch (out.eVectorStatus) {
+ case e_MEI_VECTOR_STAT_OFF:
+ return VECTOR_OFF;
+ case e_MEI_VECTOR_STAT_ON_DS:
+ return VECTOR_ON_DS;
+ case e_MEI_VECTOR_STAT_ON_DS_US:
+ return VECTOR_ON_DS_US;
+ default:
+ return VECTOR_UNKNOWN;
+ };
+#else
+ return VECTOR_UNKNOWN;
+#endif
+}
+
+static void band_plan_status(int fd, profile_t *profile) {
+#if (INCLUDE_DSL_CPE_API_VDSL_SUPPORT == 1)
+ IOCTL(DSL_BandPlanStatus_t, DSL_FIO_BAND_PLAN_STATUS_GET)
+
+ switch (out.data.nProfile) {
+ case DSL_PROFILE_8A:
+ *profile = PROFILE_8A;
+ break;
+ case DSL_PROFILE_8B:
+ *profile = PROFILE_8B;
+ break;
+ case DSL_PROFILE_8C:
+ *profile = PROFILE_8C;
+ break;
+ case DSL_PROFILE_8D:
+ *profile = PROFILE_8D;
+ break;
+ case DSL_PROFILE_12A:
+ *profile = PROFILE_12A;
+ break;
+ case DSL_PROFILE_12B:
+ *profile = PROFILE_12B;
+ break;
+ case DSL_PROFILE_17A:
+ *profile = PROFILE_17A;
+ break;
+ case DSL_PROFILE_30A:
+ *profile = PROFILE_30A;
+ break;
+ case DSL_PROFILE_35B:
+ *profile = PROFILE_35B;
+ break;
+ default:
+ *profile = PROFILE_UNKNOWN;
+ break;
+ };
+
+ const char *str;
+ switch (*profile) {
+ STR_CASE(PROFILE_8A, "8a")
+ STR_CASE(PROFILE_8B, "8b")
+ STR_CASE(PROFILE_8C, "8c")
+ STR_CASE(PROFILE_8D, "8d")
+ STR_CASE(PROFILE_12A, "12a")
+ STR_CASE(PROFILE_12B, "12b")
+ STR_CASE(PROFILE_17A, "17a")
+ STR_CASE(PROFILE_30A, "30a")
+ STR_CASE(PROFILE_35B, "35b")
+ default:
+ str = NULL;
+ break;
+ };
+ if (str)
+ m_str("profile", str);
+#endif
+}
+
+static void line_feature_config(int fd, DSL_AccessDir_t direction) {
+ IOCTL_DIR(DSL_LineFeature_t, DSL_FIO_LINE_FEATURE_STATUS_GET, direction)
+
+ m_bool("trellis", out.data.bTrellisEnable);
+ m_bool("bitswap", out.data.bBitswapEnable);
+ m_bool("retx", out.data.bReTxEnable);
+ m_bool("virtual_noise", out.data.bVirtualNoiseSupport);
+}
+
+static void g997_channel_status(int fd, DSL_AccessDir_t direction) {
+ IOCTL_DIR(DSL_G997_ChannelStatus_t, DSL_FIO_G997_CHANNEL_STATUS_GET, direction);
+
+ m_u32("interleave_delay", out.data.ActualInterleaveDelay * 10);
+ m_u32("data_rate", out.data.ActualDataRate);
+}
+
+static void g997_line_status(int fd, DSL_AccessDir_t direction) {
+ IOCTL_DIR_DELT(DSL_G997_LineStatus_t, DSL_FIO_G997_LINE_STATUS_GET, direction, DSL_DELT_DATA_SHOWTIME);
+
+ m_db("latn", out.data.LATN);
+ m_db("satn", out.data.SATN);
+ m_db("snr", out.data.SNR);
+ m_db("actps", out.data.ACTPS);
+ m_db("actatp", out.data.ACTATP);
+ m_u32("attndr", out.data.ATTNDR);
+}
+
+static void pm_line_sec_counters_total(int fd, DSL_XTUDir_t direction) {
+ IOCTL_DIR(DSL_PM_LineSecCountersTotal_t, DSL_FIO_PM_LINE_SEC_COUNTERS_TOTAL_GET, direction)
+
+ m_u32("es", out.data.nES);
+ m_u32("ses", out.data.nSES);
+ m_u32("loss", out.data.nLOSS);
+ m_u32("uas", out.data.nUAS);
+ m_u32("lofs", out.data.nLOFS);
+#ifndef INCLUDE_DSL_CPE_API_DANUBE
+ m_u32("fecs", out.data.nFECS);
+#endif
+}
+
+static void pm_data_path_counters_total(int fd, DSL_XTUDir_t direction) {
+ IOCTL_DIR(DSL_PM_DataPathCountersTotal_t, DSL_FIO_PM_DATA_PATH_COUNTERS_TOTAL_GET, direction);
+
+ m_u32("hec", out.data.nHEC);
+ m_u32("ibe", out.data.nIBE);
+ m_u32("crc_p", out.data.nCRC_P);
+ m_u32("crcp_p", out.data.nCRCP_P);
+ m_u32("cv_p", out.data.nCV_P);
+ m_u32("cvp_p", out.data.nCVP_P);
+}
+
+static void retx_statistics(int fd, DSL_XTUDir_t direction) {
+#ifdef INCLUDE_DSL_CPE_PM_RETX_COUNTERS
+#ifdef INCLUDE_DSL_CPE_PM_RETX_THRESHOLDS
+ IOCTL_DIR(DSL_ReTxStatistics_t, DSL_FIO_RETX_STATISTICS_GET, direction);
+
+ m_u32("rx_corrupted", out.data.nRxCorruptedTotal);
+ m_u32("rx_uncorrected_protected", out.data.nRxUncorrectedProtected);
+ m_u32("rx_retransmitted", out.data.nRxRetransmitted);
+ m_u32("rx_corrected", out.data.nRxCorrected);
+ m_u32("tx_retransmitted", out.data.nTxRetransmitted);
+#endif
+#endif
+}
+
+static void describe_mode(standard_t standard, profile_t profile, vector_t vector) {
+ char buf[128];
+
+ switch (standard) {
+ case STD_T1_413:
+ strcpy(buf, "T1.413");
+ break;
+ case STD_TS_101_388:
+ strcpy(buf, "TS 101 388");
+ break;
+ case STD_G_992_1:
+ strcpy(buf, "G.992.1 (ADSL)");
+ break;
+ case STD_G_992_2:
+ strcpy(buf, "G.992.2 (ADSL lite)");
+ break;
+ case STD_G_992_3:
+ strcpy(buf, "G.992.3 (ADSL2)");
+ break;
+ case STD_G_992_4:
+ strcpy(buf, "G.992.4 (ADSL2 lite)");
+ break;
+ case STD_G_992_5:
+ strcpy(buf, "G.992.5 (ADSL2+)");
+ break;
+ case STD_G_993_1:
+ strcpy(buf, "G.993.1 (VDSL)");
+ break;
+ case STD_G_993_2:
+ strcpy(buf, "G.993.2 (VDSL2");
+
+ switch (profile) {
+ case PROFILE_8A:
+ strcat(buf, ", Profile 8a");
+ break;
+ case PROFILE_8B:
+ strcat(buf, ", Profile 8b");
+ break;
+ case PROFILE_8C:
+ strcat(buf, ", Profile 8c");
+ break;
+ case PROFILE_8D:
+ strcat(buf, ", Profile 8d");
+ break;
+ case PROFILE_12A:
+ strcat(buf, ", Profile 12a");
+ break;
+ case PROFILE_12B:
+ strcat(buf, ", Profile 12b");
+ break;
+ case PROFILE_17A:
+ strcat(buf, ", Profile 17a");
+ break;
+ case PROFILE_30A:
+ strcat(buf, ", Profile 30a");
+ break;
+ case PROFILE_35B:
+ strcat(buf, ", Profile 35b");
+ break;
+ default:
+ break;
+ };
+
+ switch (vector) {
+ case VECTOR_ON_DS:
+ strcat(buf, ", with downstream vectoring");
+ break;
+ case VECTOR_ON_DS_US:
+ strcat(buf, ", with down- and upstream vectoring");
+ break;
+ default:
+ break;
+ };
+
+ strcat(buf, ")");
+ break;
+ default:
+ return;
+ };
+
+ m_str("mode", buf);
+}
+
+static int metrics(struct ubus_context *ctx, struct ubus_object *obj,
+ struct ubus_request_data *req, const char *method,
+ struct blob_attr *msg)
+{
+ void *c, *c2;
+ int fd;
+ standard_t standard = STD_UNKNOWN;
+ profile_t profile = PROFILE_UNKNOWN;
+ vector_t vector = VECTOR_UNKNOWN;
+
+ fd = open(DSL_CPE_DEVICE_NAME "0", O_RDWR, 0644);
+ if (fd < 0)
+ return UBUS_STATUS_UNKNOWN_ERROR;
+
+ blob_buf_init(&b, 0);
+
+ version_information(fd);
+ line_state(fd);
+ pm_channel_counters_showtime(fd);
+
+ c2 = blobmsg_open_table(&b, "atu_c");
+ g997_line_inventory(fd);
+ blobmsg_close_table(&b, c2);
+
+ g997_power_management_status(fd);
+ g997_xtu_system_enabling(fd, &standard);
+
+ if (standard == STD_G_993_2) {
+ band_plan_status(fd, &profile);
+ vector = get_vector_status();
+ }
+
+ describe_mode(standard, profile, vector);
+
+ c = blobmsg_open_table(&b, "upstream");
+ switch (vector) {
+ case VECTOR_OFF:
+ m_bool("vector", false);
+ break;
+ case VECTOR_ON_DS_US:
+ m_bool("vector", true);
+ break;
+ default:
+ break;
+ };
+ line_feature_config(fd, DSL_UPSTREAM);
+ g997_channel_status(fd, DSL_UPSTREAM);
+ g997_line_status(fd, DSL_UPSTREAM);
+ blobmsg_close_table(&b, c);
+
+ c = blobmsg_open_table(&b, "downstream");
+ switch (vector) {
+ case VECTOR_OFF:
+ m_bool("vector", false);
+ break;
+ case VECTOR_ON_DS:
+ case VECTOR_ON_DS_US:
+ m_bool("vector", true);
+ break;
+ default:
+ break;
+ };
+ line_feature_config(fd, DSL_DOWNSTREAM);
+ g997_channel_status(fd, DSL_DOWNSTREAM);
+ g997_line_status(fd, DSL_DOWNSTREAM);
+ blobmsg_close_table(&b, c);
+
+ c = blobmsg_open_table(&b, "errors");
+ c2 = blobmsg_open_table(&b, "near");
+ pm_line_sec_counters_total(fd, DSL_NEAR_END);
+ pm_data_path_counters_total(fd, DSL_NEAR_END);
+ retx_statistics(fd, DSL_NEAR_END);
+ blobmsg_close_table(&b, c2);
+
+ c2 = blobmsg_open_table(&b, "far");
+ pm_line_sec_counters_total(fd, DSL_FAR_END);
+ pm_data_path_counters_total(fd, DSL_FAR_END);
+ retx_statistics(fd, DSL_FAR_END);
+ blobmsg_close_table(&b, c2);
+ blobmsg_close_table(&b, c);
+
+ ubus_send_reply(ctx, req, b.head);
+
+ close(fd);
+
+ return 0;
+}
+
+static const struct ubus_method dsl_methods[] = {
+ UBUS_METHOD_NOARG("metrics", metrics),
+};
+
+static struct ubus_object_type dsl_object_type =
+ UBUS_OBJECT_TYPE("dsl", dsl_methods);
+
+static struct ubus_object dsl_object = {
+ .name = "dsl",
+ .type = &dsl_object_type,
+ .methods = dsl_methods,
+ .n_methods = ARRAY_SIZE(dsl_methods),
+};
+
+static DSL_int_t ubus_main(DSL_CPE_Thread_Params_t *params) {
+ uloop_run();
+ return 0;
+}
+
+void ubus_init() {
+ uloop_init();
+
+ ctx = ubus_connect(NULL);
+ if (!ctx)
+ return;
+
+ if (ubus_add_object(ctx, &dsl_object)) {
+ ubus_free(ctx);
+ ctx = NULL;
+ return;
+ }
+
+ ubus_add_uloop(ctx);
+
+ DSL_CPE_ThreadInit(&thread, "ubus", ubus_main, DSL_CPE_PIPE_STACK_SIZE, DSL_CPE_PIPE_PRIORITY, 0, 0);
+}
+
+void ubus_deinit() {
+ if (!ctx)
+ return;
+
+ ubus_free(ctx);
+ uloop_done();
+
+ DSL_CPE_ThreadShutdown(&thread, 1000);
+}
--
2.29.2
More information about the openwrt-devel
mailing list