[PATCH] ath79: Add support for Ubiquiti Bullet AC

[Russell Senior]

CPU:         Atheros AR9342 rev 3 SoC
RAM:         64 MB DDR2
Flash:       16 MB NOR SPI
WLAN 2.4GHz: Atheros AR9342 v3 (ath9k)
WLAN 5.0GHz: QCA988X
Ports:       1x GbE

Flashing procedure is identical to other ubnt devices.
https://openwrt.org/toh/ubiquiti/common

Flashing through factory firmware
1. Ensure firmware version v8.7.0 is installed.
   Up/downgrade to this exact version.
2. Patch fwupdate.real binary using
   `hexdump -Cv /bin/ubntbox | sed 's/14 40 fe 27/00 00 00 00/g' | \
    hexdump -R > /tmp/fwupdate.real`
3. Make the patched fwupdate.real binary executable using
   `chmod +x /tmp/fwupdate.real`
4. Copy the squashfs factory image to /tmp on the device
5. Flash OpenWrt using `/tmp/fwupdate.real -m <squashfs-factory image>`
6. Wait for the device to reboot
(copied from Ubiquiti NanoBeam AC and modified)

Flashing from serial console
1. Connect serial console (115200 baud)
2. Connect ethernet to a network with a TFTP server, through a
   passive PoE injector.
3. Press a key to obtain a u-boot prompt
4. Set your TFTP server's ip address, with:
   setenv serverip <tftp-server-address>
5. Set the Bullet AC's ip address, with:
   setenv ipaddr <bullet-ac-address>
6. Set the boot file, with:
   setenv bootfile <name-of-initramfs-binary-on-tftp-server>
7. Fetch the binary with tftp:
   tftpboot
8. Boot the initramfs binary:
   bootm
9. From the initramfs, fetch the sysupgrade binary, and flash it with
   sysupgrade.

Phy0 is QCA988X which can tune either band (2.4 or 5GHz). Phy1 is AR9342,
on which 5GHz is disabled.  It isn't currently known whether phy1 is
routed to the N connector at all.

Signed-off-by: Russell Senior <russell at personaltelco.net>
---
 .../linux/ath79/dts/ar9342_ubnt_bullet-ac.dts | 38 +++++++++++++++++++
 .../generic/base-files/etc/board.d/01_leds    |  1 +
 .../generic/base-files/etc/board.d/02_network |  1 +
 .../etc/hotplug.d/firmware/11-ath10k-caldata  |  1 +
 target/linux/ath79/image/generic-ubnt.mk      |  7 ++++
 5 files changed, 48 insertions(+)
 create mode 100644 target/linux/ath79/dts/ar9342_ubnt_bullet-ac.dts

diff --git a/target/linux/ath79/dts/ar9342_ubnt_bullet-ac.dts b/target/linux/ath79/dts/ar9342_ubnt_bullet-ac.dts
new file mode 100644
index 0000000000..be0b0792bb
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_bullet-ac.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9342_ubnt_wa_1port.dtsi"
+
+/ {
+	compatible = "ubnt,bullet-ac", "ubnt,wa", "qca,ar9342";
+	model = "Ubiquiti Bullet AC (2WA)";
+
+	aliases {
+		led-boot = &led_rssi3;
+		led-failsafe = &led_rssi3;
+		led-upgrade = &led_rssi3;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		rssi0 {
+			label = "blue:rssi0";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		rssi1 {
+			label = "blue:rssi1";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+
+		rssi2 {
+			label = "blue:rssi2";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led_rssi3: rssi3 {
+			label = "blue:rssi3";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index a0ed21e318..46d4650eac 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -366,6 +366,7 @@ ubnt,rocket-m)
 	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:link3" "wlan0" "51" "100"
 	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:link4" "wlan0" "76" "100"
 	;;
+ubnt,bullet-ac|\
 ubnt,nanobeam-ac|\
 ubnt,nanobeam-ac-gen2|\
 ubnt,nanostation-ac|\
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 149f7b1141..44430d375a 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -58,6 +58,7 @@ ath79_setup_interfaces()
 	tplink,re450-v2|\
 	tplink,re450-v3|\
 	tplink,tl-wr902ac-v1|\
+	ubnt,bullet-ac|\
 	ubnt,bullet-m-ar7240|\
 	ubnt,bullet-m-ar7241|\
 	ubnt,bullet-m-xw|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 0d09cd3140..be62e52480 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -26,6 +26,7 @@ case "$FIRMWARE" in
 	qxwlan,e1700ac-v2-16m|\
 	qxwlan,e600gac-v2-8m|\
 	qxwlan,e600gac-v2-16m|\
+	ubnt,bullet-ac|\
 	ubnt,unifiac-lite|\
 	ubnt,unifiac-lr|\
 	ubnt,unifiac-mesh|\
diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk
index c347bd1cf1..3f43671740 100644
--- a/target/linux/ath79/image/generic-ubnt.mk
+++ b/target/linux/ath79/image/generic-ubnt.mk
@@ -131,6 +131,13 @@ define Device/ubnt_airrouter
 endef
 TARGET_DEVICES += ubnt_airrouter
 
+define Device/ubnt_bullet-ac
+  $(Device/ubnt-wa)
+  DEVICE_MODEL := Bullet AC
+  DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
+endef
+TARGET_DEVICES += ubnt_bullet-ac
+
 define Device/ubnt_bullet-m-ar7240
   $(Device/ubnt-xm)
   SOC := ar7240
-- 
2.29.2


-- 
Russell Senior, President
russell at personaltelco.net