ramips: Strange boot failures on TP-Link RE200v1

[Adrian Schmutzler]

> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org]
> On Behalf Of Andreas Böhler
> Sent: Dienstag, 8. Dezember 2020 19:43
> To: openwrt-devel at lists.openwrt.org
> Subject: Re: ramips: Strange boot failures on TP-Link RE200v1
> 
> On 08/12/2020 00:53, Alberto Bursi wrote:
> >
> > On 08/12/20 00:12, Andreas Böhler wrote:
> >> I added TP-Link RE200v1 device support a few months ago. Currently,
> >> the snapshot builds are broken - they started to break about 4 weeks ago.
> >> The system does not even boot, the last output on serial is "Starting
> >> kernel ..." from U-Boot. The initramfs image works fine.
> >>
> >> The interesting thing is: all my local builds run perfectly fine,
> >> from RAM or from flash. If I sysupgrade to snapshot, even the
> >> snapshot build boots and runs fine as long as the device is not
> >> unplugged for longer than about a minute.
> >>
> >> As I can't reproduce this behaviour with my build, I'm out of ideas.
> >> Can someone give me an idea on what might cause this?
> >>
> > maybe the build defaults for buildbot are broken.
> >
> > You can enable that in the menu
> >
> > Global build settings  --->
> >
> > and then select
> >
> > Set build defaults for automatic builds (e.g. via buildbot)
> 
> Interesting option that I wasn't aware of. Didn't change anything,
> though: my build still works properly.

Can be different again if you pull and install all feeds (like the buildbots actually do).

> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: openpgp-digital-signature.asc
Type: application/pgp-signature
Size: 834 bytes
Desc: not available
URL: <http://lists.openwrt.org/pipermail/openwrt-devel/attachments/20201208/17c18712/attachment.sig>