[PATCH] bcm53xx: use vendor_model scheme for device/image names

Adrian Schmutzler freifunk at adrianschmutzler.de
Tue Aug 4 10:02:56 EDT 2020 

Most targets have been updated to consistently use the vendor_model
scheme for device definitions and thus, image names.

Apply this to bcm53xx as well. This does _not_ apply any other
specific naming changes.

Cc: Rafał Miłecki <rafal at milecki.pl>
Signed-off-by: Adrian Schmutzler <freifunk at adrianschmutzler.de>
---
 target/linux/bcm53xx/image/Makefile | 114 ++++++++++++++--------------
 1 file changed, 57 insertions(+), 57 deletions(-)

diff --git a/target/linux/bcm53xx/image/Makefile b/target/linux/bcm53xx/image/Makefile
index a117e02a45..c490192b8a 100644
--- a/target/linux/bcm53xx/image/Makefile
+++ b/target/linux/bcm53xx/image/Makefile
@@ -125,7 +125,7 @@ USB3_PACKAGES := $(USB2_PACKAGES) kmod-usb3 kmod-phy-bcm-ns-usb3
 define Device/Default
   # .dtb files are prefixed by SoC type, e.g. bcm4708- which is not included in device/image names
   # extract the full dtb name based on the device info
-  DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(1).dtb)))
+  DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(subst _,-,$(1)).dtb)))
   KERNEL := kernel-bin | append-dtb | lzma-d16
   KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
   KERNEL_INITRAMFS_SUFFIX := .trx
@@ -145,37 +145,37 @@ define Device/asus
   IMAGE/trx := append-ubi | trx-nand | asus-trx
 endef
 
-define Device/asus-rt-ac56u
+define Device/asus_rt-ac56u
   $(call Device/asus)
   DEVICE_MODEL := RT-AC56U
   DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
   ASUS_PRODUCTID := RT-AC56U
 endef
-TARGET_DEVICES += asus-rt-ac56u
+TARGET_DEVICES += asus_rt-ac56u
 
-define Device/asus-rt-ac68u
+define Device/asus_rt-ac68u
   $(call Device/asus)
   DEVICE_MODEL := RT-AC68U
   DEVICE_PACKAGES := $(USB3_PACKAGES)
   ASUS_PRODUCTID := RT-AC68U
 endef
-TARGET_DEVICES += asus-rt-ac68u
+TARGET_DEVICES += asus_rt-ac68u
 
-define Device/asus-rt-ac87u
+define Device/asus_rt-ac87u
   $(call Device/asus)
   DEVICE_MODEL := RT-AC87U
   DEVICE_PACKAGES := $(USB3_PACKAGES)
   ASUS_PRODUCTID := RT-AC87U
 endef
-TARGET_DEVICES += asus-rt-ac87u
+TARGET_DEVICES += asus_rt-ac87u
 
-define Device/asus-rt-n18u
+define Device/asus_rt-n18u
   $(call Device/asus)
   DEVICE_MODEL := RT-N18U
   DEVICE_PACKAGES := $(USB3_PACKAGES)
   ASUS_PRODUCTID := RT-N18U
 endef
-TARGET_DEVICES += asus-rt-n18u
+TARGET_DEVICES += asus_rt-n18u
 
 # Buffalo devices have TFTP recovery mode which can work nicely with initramfs
 # kernels.
@@ -188,21 +188,21 @@ define Device/buffalo/Default
   KERNEL_INITRAMFS = $$(KERNEL)
 endef
 
-define Device/buffalo-wxr-1900dhp
+define Device/buffalo_wxr-1900dhp
   $(call Device/buffalo/Default)
   DEVICE_MODEL := WXR-1900DHP
   DEVICE_PACKAGES := $(USB3_PACKAGES)
 endef
-TARGET_DEVICES += buffalo-wxr-1900dhp
+TARGET_DEVICES += buffalo_wxr-1900dhp
 
-define Device/buffalo-wzr-600dhp2
+define Device/buffalo_wzr-600dhp2
   $(call Device/buffalo/Default)
   DEVICE_MODEL := WZR-600DHP2
   DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
 endef
-TARGET_DEVICES += buffalo-wzr-600dhp2
+TARGET_DEVICES += buffalo_wzr-600dhp2
 
-define Device/buffalo-wzr-900dhp
+define Device/buffalo_wzr-900dhp
   $(call Device/buffalo/Default)
   DEVICE_MODEL := WZR-900DHP
   DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
@@ -221,14 +221,14 @@ define Device/buffalo-wzr-900dhp
 	buffalo-tag-dhp WZR-900DHP2 JP jp | buffalo-enc-tag | \
 	buffalo-dhp-image
 endef
-TARGET_DEVICES += buffalo-wzr-900dhp
+TARGET_DEVICES += buffalo_wzr-900dhp
 
-define Device/buffalo-wzr-1750dhp
+define Device/buffalo_wzr-1750dhp
   $(call Device/buffalo/Default)
   DEVICE_MODEL := WZR-1750DHP
   DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
 endef
-TARGET_DEVICES += buffalo-wzr-1750dhp
+TARGET_DEVICES += buffalo_wzr-1750dhp
 
 define Device/dlink
   DEVICE_VENDOR := D-Link
@@ -236,49 +236,49 @@ define Device/dlink
   IMAGE/bin := append-ubi | seama-nand
 endef
 
-define Device/dlink-dir-885l
+define Device/dlink_dir-885l
   DEVICE_MODEL := DIR-885L
   DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES)
   $(Device/dlink)
   SIGNATURE := wrgac42_dlink.2015_dir885l
 endef
-TARGET_DEVICES += dlink-dir-885l
+TARGET_DEVICES += dlink_dir-885l
 
 # Linksys devices are disabled due to problem with 2 TRX partitions
-define Device/linksys-ea6300-v1
+define Device/linksys_ea6300-v1
   DEVICE_VENDOR := Linksys
   DEVICE_MODEL := EA6300
   DEVICE_VARIANT := v1
   DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
   BROKEN := y
 endef
-TARGET_DEVICES += linksys-ea6300-v1
+TARGET_DEVICES += linksys_ea6300-v1
 
-define Device/linksys-ea6500-v2
+define Device/linksys_ea6500-v2
   DEVICE_VENDOR := Linksys
   DEVICE_MODEL := EA6500
   DEVICE_VARIANT := v2
   DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
 endef
-TARGET_DEVICES += linksys-ea6500-v2
+TARGET_DEVICES += linksys_ea6500-v2
 
-define Device/linksys-ea9200
+define Device/linksys_ea9200
   DEVICE_VENDOR := Linksys
   DEVICE_MODEL := EA9200
   DEVICE_VARIANT := v1
   DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
   BROKEN := y
 endef
-TARGET_DEVICES += linksys-ea9200
+TARGET_DEVICES += linksys_ea9200
 
-define Device/linksys-ea9500
+define Device/linksys_ea9500
   DEVICE_VENDOR := Linksys
   DEVICE_MODEL := EA9500
   DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
   DEVICE_DTS := bcm47094-linksys-panamera
   BROKEN := y
 endef
-TARGET_DEVICES += linksys-ea9500
+TARGET_DEVICES += linksys_ea9500
 
 define Device/luxul
   DEVICE_VENDOR := Luxul
@@ -286,39 +286,39 @@ define Device/luxul
   IMAGE/lxl := append-ubi | trx-nand | luxul-lxl
 endef
 
-define Device/luxul-abr-4500
+define Device/luxul_abr-4500
   $(Device/luxul)
   DEVICE_MODEL := ABR-4500
   DEVICE_PACKAGES := $(USB3_PACKAGES)
   LUXUL_BOARD := ABR-4500
 endef
-TARGET_DEVICES += luxul-abr-4500
+TARGET_DEVICES += luxul_abr-4500
 
-define Device/luxul-xap-1610
+define Device/luxul_xap-1610
   $(Device/luxul)
   DEVICE_MODEL := XAP-1610
   DEVICE_PACKAGES := $(BRCMFMAC_4366C0)
   IMAGE/lxl := append-rootfs | trx-serial | luxul-lxl
   LUXUL_BOARD := XAP-1610
 endef
-TARGET_DEVICES += luxul-xap-1610
+TARGET_DEVICES += luxul_xap-1610
 
-define Device/luxul-xbr-4500
+define Device/luxul_xbr-4500
   $(Device/luxul)
   DEVICE_MODEL := XBR-4500
   DEVICE_PACKAGES := $(USB3_PACKAGES)
   LUXUL_BOARD := XBR-4500
 endef
-TARGET_DEVICES += luxul-xbr-4500
+TARGET_DEVICES += luxul_xbr-4500
 
-define Device/luxul-xwr-3150
+define Device/luxul_xwr-3150
   $(Device/luxul)
   DEVICE_MODEL := XWR-3150
   DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
   DEVICE_DTS := bcm47094-luxul-xwr-3150-v1
   LUXUL_BOARD := XWR-3150
 endef
-TARGET_DEVICES += luxul-xwr-3150
+TARGET_DEVICES += luxul_xwr-3150
 
 define Device/netgear
   DEVICE_VENDOR := NETGEAR
@@ -327,57 +327,57 @@ define Device/netgear
   NETGEAR_REGION := 1
 endef
 
-define Device/netgear-r6250
+define Device/netgear_r6250
   DEVICE_MODEL := R6250
   DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
   $(Device/netgear)
   NETGEAR_BOARD_ID := U12H245T00_NETGEAR
 endef
-TARGET_DEVICES += netgear-r6250
+TARGET_DEVICES += netgear_r6250
 
-define Device/netgear-r6300-v2
+define Device/netgear_r6300-v2
   DEVICE_MODEL := R6300
   DEVICE_VARIANT := v2
   DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
   $(Device/netgear)
   NETGEAR_BOARD_ID := U12H240T00_NETGEAR
 endef
-TARGET_DEVICES += netgear-r6300-v2
+TARGET_DEVICES += netgear_r6300-v2
 
-define Device/netgear-r7000
+define Device/netgear_r7000
   DEVICE_MODEL := R7000
   DEVICE_PACKAGES := $(USB3_PACKAGES)
   $(Device/netgear)
   NETGEAR_BOARD_ID := U12H270T00_NETGEAR
 endef
-TARGET_DEVICES += netgear-r7000
+TARGET_DEVICES += netgear_r7000
 
-define Device/netgear-r7900
+define Device/netgear_r7900
   DEVICE_MODEL := R7900
   DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
   $(Device/netgear)
   NETGEAR_BOARD_ID := U12H315T30_NETGEAR
 endef
-TARGET_DEVICES += netgear-r7900
+TARGET_DEVICES += netgear_r7900
 
-define Device/netgear-r8000
+define Device/netgear_r8000
   DEVICE_MODEL := R8000
   DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
   $(Device/netgear)
   NETGEAR_BOARD_ID := U12H315T00_NETGEAR
 endef
-TARGET_DEVICES += netgear-r8000
+TARGET_DEVICES += netgear_r8000
 
-define Device/netgear-r8500
+define Device/netgear_r8500
   DEVICE_MODEL := R8500
   DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES)
   $(Device/netgear)
   NETGEAR_BOARD_ID := U12H334T00_NETGEAR
   DEFAULT := n
 endef
-TARGET_DEVICES += netgear-r8500
+TARGET_DEVICES += netgear_r8500
 
-define Device/smartrg-sr400ac
+define Device/smartrg_sr400ac
   DEVICE_VENDOR := SmartRG
   DEVICE_MODEL := SR400ac
   DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
@@ -386,26 +386,26 @@ define Device/smartrg-sr400ac
   KERNEL_INITRAMFS_SUFFIX := .bin
   KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma-d16
 endef
-TARGET_DEVICES += smartrg-sr400ac
+TARGET_DEVICES += smartrg_sr400ac
 
-define Device/phicomm-k3
+define Device/phicomm_k3
   DEVICE_VENDOR := PHICOMM
   DEVICE_MODEL := K3
   DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
   IMAGES := trx
 endef
-TARGET_DEVICES += phicomm-k3
+TARGET_DEVICES += phicomm_k3
 
-define Device/tenda-ac9
+define Device/tenda_ac9
   DEVICE_VENDOR := Tenda
   DEVICE_MODEL := AC9
   DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
   IMAGES := trx
   IMAGE/trx := append-rootfs | trx-serial
 endef
-TARGET_DEVICES += tenda-ac9
+TARGET_DEVICES += tenda_ac9
 
-define Device/tplink-archer-c5-v2
+define Device/tplink_archer-c5-v2
   DEVICE_VENDOR := TP-LINK
   DEVICE_MODEL := Archer C5
   DEVICE_VARIANT := v2
@@ -415,9 +415,9 @@ define Device/tplink-archer-c5-v2
   TPLINK_BOARD := ARCHER-C5-V2
   BROKEN := y
 endef
-TARGET_DEVICES += tplink-archer-c5-v2
+TARGET_DEVICES += tplink_archer-c5-v2
 
-define Device/tplink-archer-c9-v1
+define Device/tplink_archer-c9-v1
   DEVICE_VENDOR := TP-LINK
   DEVICE_MODEL := Archer C9
   DEVICE_VARIANT := v1
@@ -427,6 +427,6 @@ define Device/tplink-archer-c9-v1
   TPLINK_BOARD := ARCHERC9
   BROKEN := y
 endef
-TARGET_DEVICES += tplink-archer-c9-v1
+TARGET_DEVICES += tplink_archer-c9-v1
 
 $(eval $(call BuildImage))
-- 
2.20.1

More information about the openwrt-devel mailing list