[OpenWrt-Devel] Upgrading LEDE to 19.07

[Rosen Penev]

> On Apr 25, 2020, at 11:16 AM, Luca Bertoncello <lucabert at lucabert.de> wrote:
> 
> Am 25.04.2020 um 20:12 schrieb Alberto Bursi:
> 
> Hi
> 
>> The only "discontinued" is the "Availability", and that just means if
>> you can still find or buy this device new from somewhere.
>> It does not mean anything about OpenWrt support of the device.
>> The device is still supported.
> 
> OK
> 
>>> If I undestand correct, I can upgrade to 19.07, but it will be the last
>>> version I can get, is it right?
>> 
>> The main issue is the warning about 32MB of RAM you see on the top of
>> that page.
> 
> I read it...
> LUCI says, my device has 60664KB RAM, and I can see the same value
> checking /proc/meminfo
> 
>> If your device is HW Version 1 (white case, black antennas) then it
>> might not have enough RAM to run OpenWrt.
> 
> I have this device, white cas and three black antennas...
> But, as I sayd, it seems to have ~60MB RAM...
If it has 64MB RAM, it should be fine. That also means this is not a v1. The v1 is the square/rectangular model.
> 
>> You can try upgrading or asking in the forums if someone has already
>> done that.
> 
> Could you suggest me a better place to ask this question?
> I really think, this list is not the appropriate place...
> 
> Thanks
> Luca Bertoncello
> (lucabert at lucabert.de)
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel