[OpenWrt-Devel] [PATCH 1/3] ramips: mt7621: add LAN port mac address to rbm11g dts

[Tobias Schramm]

Hi Adrian,

>>  		port at 0 {
>>  			status = "okay";
>>  			label = "lan";
>> +			mtd-mac-address = <&hard_config 0x0010>;
>> +			mtd-mac-address-increment = <2>;
> 
> That doesn't make sense to me.
> 
> gmac0 is configured to 0x10 +1, why would you overwrite that value for a single port?
Thanks for the clarification. Didn't look at the device hierarchy
beforehand.
> 
> And which is the correct value for the port of this device (based on vendor FW?).
> 
> Note that setting another MAC address for the first port of m33g is because this is the WAN port, all LAN port will get the address from gmac0 there as well.
> 
> Best
> 
> Adrian

Tobias

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel